crypto/dpaax_sec: enable build without rte_security

[dpdk.git] / drivers / crypto / dpaa_sec / dpaa_sec.c

diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c
index 7c37136..632ce9f 100644 (file)
--- a/drivers/crypto/dpaa_sec/dpaa_sec.c
+++ b/drivers/crypto/dpaa_sec/dpaa_sec.c
@@ -15,7 +15,9 @@
 #include <rte_cryptodev_pmd.h>
 #include <rte_crypto.h>
 #include <rte_cryptodev.h>
+#ifdef RTE_LIBRTE_SECURITY
 #include <rte_security_driver.h>
+#endif
 #include <rte_cycles.h>
 #include <rte_dev.h>
 #include <rte_kvargs.h>
@@ -252,6 +254,7 @@ static inline int is_decode(dpaa_sec_session *ses)
        return ses->dir == DIR_DEC;
 }
 
+#ifdef RTE_LIBRTE_SECURITY
 static int
 dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses)
 {
@@ -355,7 +358,6 @@ dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses)
                                        ses->pdcp.hfn_threshold,
                                        &cipherdata, p_authdata, 0);
        }
-
        return shared_desc_len;
 }
 
@@ -432,7 +434,7 @@ dpaa_sec_prep_ipsec_cdb(dpaa_sec_session *ses)
        }
        return shared_desc_len;
 }
-
+#endif
 /* prepare command block of the session */
 static int
 dpaa_sec_prep_cdb(dpaa_sec_session *ses)
@@ -450,12 +452,14 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
        memset(cdb, 0, sizeof(struct sec_cdb));
 
        switch (ses->ctxt) {
+#ifdef RTE_LIBRTE_SECURITY
        case DPAA_SEC_IPSEC:
                shared_desc_len = dpaa_sec_prep_ipsec_cdb(ses);
                break;
        case DPAA_SEC_PDCP:
                shared_desc_len = dpaa_sec_prep_pdcp_cdb(ses);
                break;
+#endif
        case DPAA_SEC_CIPHER:
                alginfo_c.key = (size_t)ses->cipher_key.data;
                alginfo_c.keylen = ses->cipher_key.length;
@@ -1580,6 +1584,7 @@ build_cipher_auth(struct rte_crypto_op *op, dpaa_sec_session *ses)
        return cf;
 }
 
+#ifdef RTE_LIBRTE_SECURITY
 static inline struct dpaa_sec_job *
 build_proto(struct rte_crypto_op *op, dpaa_sec_session *ses)
 {
@@ -1711,6 +1716,7 @@ build_proto_sg(struct rte_crypto_op *op, dpaa_sec_session *ses)
 
        return cf;
 }
+#endif
 
 static uint16_t
 dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
@@ -1753,11 +1759,13 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                                        op->sym->session,
                                                        cryptodev_driver_id);
                                break;
+#ifdef RTE_LIBRTE_SECURITY
                        case RTE_CRYPTO_OP_SECURITY_SESSION:
                                ses = (dpaa_sec_session *)
                                        get_sec_session_private_data(
                                                        op->sym->sec_session);
                                break;
+#endif
                        default:
                                DPAA_SEC_DP_ERR(
                                        "sessionless crypto op not supported");
@@ -1790,10 +1798,12 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                  ((op->sym->m_dst == NULL) ||
                                   rte_pktmbuf_is_contiguous(op->sym->m_dst))) {
                                switch (ses->ctxt) {
+#ifdef RTE_LIBRTE_SECURITY
                                case DPAA_SEC_PDCP:
                                case DPAA_SEC_IPSEC:
                                        cf = build_proto(op, ses);
                                        break;
+#endif
                                case DPAA_SEC_AUTH:
                                        cf = build_auth_only(op, ses);
                                        break;
@@ -1822,10 +1832,12 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                }
                        } else {
                                switch (ses->ctxt) {
+#ifdef RTE_LIBRTE_SECURITY
                                case DPAA_SEC_PDCP:
                                case DPAA_SEC_IPSEC:
                                        cf = build_proto_sg(op, ses);
                                        break;
+#endif
                                case DPAA_SEC_AUTH:
                                        cf = build_auth_only_sg(op, ses);
                                        break;
@@ -1877,6 +1889,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                        ((auth_tail_len << 16) | auth_hdr_len);
                        }
 
+#ifdef RTE_LIBRTE_SECURITY
                        /* In case of PDCP, per packet HFN is stored in
                         * mbuf priv after sym_op.
                         */
@@ -1889,7 +1902,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                        ses->pdcp.hfn_ovd_offset)),
                                        ses->pdcp.hfn_ovd);
                        }
-
+#endif
                }
 send_pkts:
                loop = 0;
@@ -2483,6 +2496,7 @@ dpaa_sec_sym_session_clear(struct rte_cryptodev *dev,
        }
 }
 
+#ifdef RTE_LIBRTE_SECURITY
 static int
 dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
                           struct rte_security_session_conf *conf,
@@ -2906,7 +2920,7 @@ dpaa_sec_security_session_destroy(void *dev __rte_unused,
        }
        return 0;
 }
-
+#endif
 static int
 dpaa_sec_dev_configure(struct rte_cryptodev *dev __rte_unused,
                       struct rte_cryptodev_config *config __rte_unused)
@@ -3152,6 +3166,7 @@ static struct rte_cryptodev_ops crypto_ops = {
        .sym_session_clear        = dpaa_sec_sym_session_clear
 };
 
+#ifdef RTE_LIBRTE_SECURITY
 static const struct rte_security_capability *
 dpaa_sec_capabilities_get(void *device __rte_unused)
 {
@@ -3166,7 +3181,7 @@ static const struct rte_security_ops dpaa_sec_security_ops = {
        .set_pkt_metadata = NULL,
        .capabilities_get = dpaa_sec_capabilities_get
 };
-
+#endif
 static int
 dpaa_sec_uninit(struct rte_cryptodev *dev)
 {
@@ -3190,7 +3205,9 @@ static int
 dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
 {
        struct dpaa_sec_dev_private *internals;
+#ifdef RTE_LIBRTE_SECURITY
        struct rte_security_ctx *security_instance;
+#endif
        struct dpaa_sec_qp *qp;
        uint32_t i, flags;
        int ret;
@@ -3225,7 +3242,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
                DPAA_SEC_WARN("Device already init by primary process");
                return 0;
        }
-
+#ifdef RTE_LIBRTE_SECURITY
        /* Initialize security_ctx only for primary process*/
        security_instance = rte_malloc("rte_security_instances_ops",
                                sizeof(struct rte_security_ctx), 0);
@@ -3235,7 +3252,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
        security_instance->ops = &dpaa_sec_security_ops;
        security_instance->sess_cnt = 0;
        cryptodev->security_ctx = security_instance;
-
+#endif
        rte_spinlock_init(&internals->lock);
        for (i = 0; i < internals->max_nb_queue_pairs; i++) {
                /* init qman fq for queue pair */