#ifndef _HSI_STRUCT_DEF_DPDK_
#define _HSI_STRUCT_DEF_DPDK_
-/* HSI and HWRM Specification 1.7.7 */
+/* HSI and HWRM Specification 1.8.2 */
#define HWRM_VERSION_MAJOR 1
-#define HWRM_VERSION_MINOR 7
-#define HWRM_VERSION_UPDATE 7
+#define HWRM_VERSION_MINOR 8
+#define HWRM_VERSION_UPDATE 2
-#define HWRM_VERSION_STR "1.7.7"
+#define HWRM_VERSION_RSVD 0 /* non-zero means beta version */
+
+#define HWRM_VERSION_STR "1.8.2.0"
/*
* Following is the signature for HWRM message field that indicates not
* applicable (All F's). Need to cast it the size of the field if needed.
*/
#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
-#define HWRM_MAX_RESP_LEN (248) /* hwrm_selftest_qlist */
+#define HWRM_MAX_RESP_LEN (280) /* hwrm_selftest_qlist */
#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
#define HW_HASH_KEY_SIZE 40
#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
#define HWRM_ROCE_SP_HSI_VERSION_MAJOR 1
-#define HWRM_ROCE_SP_HSI_VERSION_MINOR 7
-#define HWRM_ROCE_SP_HSI_VERSION_UPDATE 4
+#define HWRM_ROCE_SP_HSI_VERSION_MINOR 8
+#define HWRM_ROCE_SP_HSI_VERSION_UPDATE 2
/*
* Request types
#define HWRM_PORT_CLR_STATS (UINT32_C(0x25))
#define HWRM_PORT_PHY_QCFG (UINT32_C(0x27))
#define HWRM_PORT_MAC_QCFG (UINT32_C(0x28))
+#define HWRM_PORT_MAC_PTP_QCFG (UINT32_C(0x29))
#define HWRM_PORT_PHY_QCAPS (UINT32_C(0x2a))
#define HWRM_PORT_LED_CFG (UINT32_C(0x2d))
#define HWRM_PORT_LED_QCFG (UINT32_C(0x2e))
* packet. Length = 32B
*/
#define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11)
- #define RX_PKT_CMPL_TYPE_RX_L2_TPA_START UINT32_C(0x13)
- #define RX_PKT_CMPL_TYPE_RX_L2_TPA_END UINT32_C(0x15)
/*
* When this bit is '1', it indicates a packet that has an error
* of some type. Type of error is indicated in error_flags.
* This is the length of the data for the packet stored in the
* buffer(s) identified by the opaque value. This includes the
* packet BD and any associated buffer BDs. This does not
- * include the the length of any data places in aggregation BDs.
+ * include the length of any data places in aggregation BDs.
*/
uint32_t opaque;
/*
UINT32_C(0x32)
/* VF Configuration Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE UINT32_C(0x33)
+ /* LLFC/PFC Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LLFC_PFC_CHANGE UINT32_C(0x34)
/* HWRM Error */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR UINT32_C(0xff)
uint32_t event_data2;
* This field returns the default request timeout value in
* milliseconds.
*/
+ uint8_t init_pending;
+ /*
+ * This field will indicate if any subsystems is not fully
+ * initialized.
+ */
+ /*
+ * If set to 1, device is not ready. If set to 0, device is
+ * ready to accept all HWRM commands.
+ */
+ #define HWRM_VER_GET_OUTPUT_INIT_PENDING_DEV_NOT_RDY UINT32_C(0x1)
uint8_t unused_0;
uint8_t unused_1;
- uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
+/* hwrm_func_vf_cfg */
+/*
+ * Description: This command allows configuration of a VF by its driver. If this
+ * function is called by a PF driver, then the HWRM shall fail this command. If
+ * guest VLAN and/or MAC address are provided in this command, then the HWRM
+ * shall set up appropriate MAC/VLAN filters for the VF that is being
+ * configured. A VF driver should set VF MTU/MRU using this command prior to
+ * allocating RX VNICs or TX rings for the corresponding VF.
+ */
+/* Input (32 bytes) */
+struct hwrm_func_vf_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the mtu field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
+ /* This bit must be '1' for the guest_vlan field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the async_event_cr field to be configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4)
+ /* This bit must be '1' for the dflt_mac_addr field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x8)
+ uint16_t mtu;
+ /*
+ * The maximum transmission unit requested on the function. The HWRM
+ * should make sure that the mtu of the function does not exceed the mtu
+ * of the physical port that this function is associated with. In
+ * addition to requesting mtu per function, it is possible to configure
+ * mtu per transmit ring. By default, the mtu of each transmit ring
+ * associated with a function is equal to the mtu of the function. The
+ * HWRM should make sure that the mtu of each transmit ring that is
+ * assigned to a function has a valid mtu.
+ */
+ uint16_t guest_vlan;
+ /*
+ * The guest VLAN for the function being configured. This field's format
+ * is same as 802.1Q Tag's Tag Control Information (TCI) format that
+ * includes both Priority Code Point (PCP) and VLAN Identifier (VID).
+ */
+ uint16_t async_event_cr;
+ /*
+ * ID of the target completion ring for receiving asynchronous event
+ * completions. If this field is not valid, then the HWRM shall use the
+ * default completion ring of the function that is being configured as
+ * the target completion ring for providing any asynchronous event
+ * completions for that function. If this field is valid, then the HWRM
+ * shall use the completion ring identified by this ID as the target
+ * completion ring for providing any asynchronous event completions for
+ * the function that is being configured.
+ */
+ uint8_t dflt_mac_addr[6];
+ /*
+ * This value is the current MAC address requested by the VF driver to
+ * be configured on this VF. A value of 00-00-00-00-00-00 indicates no
+ * MAC address configuration is requested by the VF driver. The parent
+ * PF driver may reject or overwrite this MAC address.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_vf_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_qcaps */
/*
* Description: This command returns capabilities of a function. The input FID
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0)
uint16_t dflt_vnic_id;
/* The default VNIC ID assigned to a function that is being queried. */
- uint8_t unused_0;
- uint8_t unused_1;
+ uint16_t max_mtu_configured;
+ /*
+ * This value specifies the MAX MTU that can be configured by
+ * host drivers. This 'max_mtu_configure' can be HW max MTU or
+ * OEM applications specified value. Host drivers can't
+ * configure the MTU greater than this value. Host drivers
+ * should read this value prior to configuring the MTU. FW will
+ * fail the host request with MTU greater than
+ * 'max_mtu_configured'.
+ */
uint32_t min_bw;
/*
* Minimum BW allocated for this function. The HWRM will
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1)
/* Virtual Ethernet Port Aggregator (VEPA) */
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2)
- uint8_t unused_2;
+ uint8_t unused_0;
uint16_t alloc_vfs;
/*
* The number of VFs that are allocated to the function. This is
* The number of strict priority transmit rings out of currently
* allocated TX rings to the function (alloc_tx_rings).
*/
- uint8_t unused_3;
+ uint8_t unused_1;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
uint16_t fid;
/*
* Function ID of the function that is being configured. If set
- * to 0xFF... (All Fs), then the the configuration is for the
+ * to 0xFF... (All Fs), then the configuration is for the
* requesting function.
*/
uint8_t unused_0;
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \
UINT32_C(0x1000)
+ /*
+ * This bit requests that the firmware test to see if all the
+ * assets requested in this command (i.e. number of TX rings)
+ * are available. The firmware will return an error if the
+ * requested assets are not available. The firwmare will NOT
+ * reserve the assets if they are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_TX_ASSETS_TEST UINT32_C(0x2000)
uint32_t enables;
/* This bit must be '1' for the mtu field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
*/
} __attribute__((packed));
-/* hwrm_func_vf_cfg */
-/*
- * Description: This command allows configuration of a VF by its driver. If this
- * function is called by a PF driver, then the HWRM shall fail this command. If
- * guest VLAN and/or MAC address are provided in this command, then the HWRM
- * shall set up appropriate MAC/VLAN filters for the VF that is being
- * configured. A VF driver should set VF MTU/MRU using this command prior to
- * allocating RX VNICs or TX rings for the corresponding VF.
- */
-/* Input (32 bytes) */
-
-struct hwrm_func_vf_cfg_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
- */
- uint32_t enables;
- /* This bit must be '1' for the mtu field to be configured. */
- #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
- /* This bit must be '1' for the guest_vlan field to be configured. */
- #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN UINT32_C(0x2)
- /*
- * This bit must be '1' for the async_event_cr field to be configured.
- */
- #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4)
- /* This bit must be '1' for the dflt_mac_addr field to be configured. */
- #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x8)
- uint16_t mtu;
- /*
- * The maximum transmission unit requested on the function. The HWRM
- * should make sure that the mtu of the function does not exceed the mtu
- * of the physical port that this function is associated with. In
- * addition to requesting mtu per function, it is possible to configure
- * mtu per transmit ring. By default, the mtu of each transmit ring
- * associated with a function is equal to the mtu of the function. The
- * HWRM should make sure that the mtu of each transmit ring that is
- * assigned to a function has a valid mtu.
- */
- uint16_t guest_vlan;
- /*
- * The guest VLAN for the function being configured. This field's format
- * is same as 802.1Q Tag's Tag Control Information (TCI) format that
- * includes both Priority Code Point (PCP) and VLAN Identifier (VID).
- */
- uint16_t async_event_cr;
- /*
- * ID of the target completion ring for receiving asynchronous event
- * completions. If this field is not valid, then the HWRM shall use the
- * default completion ring of the function that is being configured as
- * the target completion ring for providing any asynchronous event
- * completions for that function. If this field is valid, then the HWRM
- * shall use the completion ring identified by this ID as the target
- * completion ring for providing any asynchronous event completions for
- * the function that is being configured.
- */
- uint8_t dflt_mac_addr[6];
- /*
- * This value is the current MAC address requested by the VF driver to
- * be configured on this VF. A value of 00-00-00-00-00-00 indicates no
- * MAC address configuration is requested by the VF driver. The parent
- * PF driver may reject or overwrite this MAC address.
- */
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-
-struct hwrm_func_vf_cfg_output {
- uint16_t error_code;
- /*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
- */
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
- /*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
- */
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
- */
-} __attribute__((packed));
-
/* hwrm_port_phy_cfg */
/*
* Description: This command configures the PHY device for the port. It allows
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff)
- uint8_t duplex;
+ uint8_t duplex_cfg;
/* This value is indicates the duplex of the current connection. */
/* Half Duplex connection. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_HALF UINT32_C(0x0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_HALF UINT32_C(0x0)
/* Full duplex connection. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL UINT32_C(0x1)
uint8_t pause;
/*
* This value is used to indicate the current pause
/* 40G_ACTIVE_CABLE */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \
UINT32_C(0x18)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET UINT32_C(0x19)
+ /* 1G_baseSX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX UINT32_C(0x1a)
+ /* 1G_baseCX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX UINT32_C(0x1b)
uint8_t media_type;
/* This value represents a media type. */
/* Unknown */
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
UINT32_C(0x40)
+ uint8_t duplex_state;
+ /*
+ * This value is indicates the duplex of the current connection
+ * state.
+ */
+ /* Half Duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0)
+ /* Full duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1)
uint8_t unused_1;
- uint8_t unused_2;
char phy_vendor_name[16];
/*
* Up to 16 bytes of null padded ASCII string representing PHY
* to null, then the vendor specific part number is not
* available.
*/
- uint32_t unused_3;
+ uint32_t unused_2;
+ uint8_t unused_3;
uint8_t unused_4;
uint8_t unused_5;
- uint8_t unused_6;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
+/*********************
+ * hwrm_port_mac_cfg *
+ *********************/
+
+
+/* hwrm_port_mac_cfg_input (size:320b/40B) */
+struct hwrm_port_mac_cfg_input {
+ uint16_t req_type;
+ uint16_t cmpl_ring;
+ uint16_t seq_id;
+ uint16_t target_id;
+ uint64_t resp_addr;
+ uint32_t flags;
+ #define PORT_MAC_CFG_REQ_FLAGS_MATCH_LINK 0x1UL
+ #define PORT_MAC_CFG_REQ_FLAGS_VLAN_PRI2COS_ENABLE 0x2UL
+ #define PORT_MAC_CFG_REQ_FLAGS_TUNNEL_PRI2COS_ENABLE 0x4UL
+ #define PORT_MAC_CFG_REQ_FLAGS_IP_DSCP2COS_ENABLE 0x8UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_RX_TS_CAPTURE_ENABLE 0x10UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_RX_TS_CAPTURE_DISABLE 0x20UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_TX_TS_CAPTURE_ENABLE 0x40UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_TX_TS_CAPTURE_DISABLE 0x80UL
+ #define PORT_MAC_CFG_REQ_FLAGS_OOB_WOL_ENABLE 0x100UL
+ #define PORT_MAC_CFG_REQ_FLAGS_OOB_WOL_DISABLE 0x200UL
+ #define PORT_MAC_CFG_REQ_FLAGS_VLAN_PRI2COS_DISABLE 0x400UL
+ #define PORT_MAC_CFG_REQ_FLAGS_TUNNEL_PRI2COS_DISABLE 0x800UL
+ #define PORT_MAC_CFG_REQ_FLAGS_IP_DSCP2COS_DISABLE 0x1000UL
+ uint32_t enables;
+ #define PORT_MAC_CFG_REQ_ENABLES_IPG 0x1UL
+ #define PORT_MAC_CFG_REQ_ENABLES_LPBK 0x2UL
+ #define PORT_MAC_CFG_REQ_ENABLES_VLAN_PRI2COS_MAP_PRI 0x4UL
+ #define PORT_MAC_CFG_REQ_ENABLES_TUNNEL_PRI2COS_MAP_PRI 0x10UL
+ #define PORT_MAC_CFG_REQ_ENABLES_DSCP2COS_MAP_PRI 0x20UL
+ #define PORT_MAC_CFG_REQ_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE 0x40UL
+ #define PORT_MAC_CFG_REQ_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE 0x80UL
+ #define PORT_MAC_CFG_REQ_ENABLES_COS_FIELD_CFG 0x100UL
+ uint16_t port_id;
+ uint8_t ipg;
+ uint8_t lpbk;
+ #define PORT_MAC_CFG_REQ_LPBK_NONE 0x0UL
+ #define PORT_MAC_CFG_REQ_LPBK_LOCAL 0x1UL
+ #define PORT_MAC_CFG_REQ_LPBK_REMOTE 0x2UL
+ #define PORT_MAC_CFG_REQ_LPBK_LAST PORT_MAC_CFG_REQ_LPBK_REMOTE
+ uint8_t vlan_pri2cos_map_pri;
+ uint8_t reserved1;
+ uint8_t tunnel_pri2cos_map_pri;
+ uint8_t dscp2pri_map_pri;
+ uint16_t rx_ts_capture_ptp_msg_type;
+ uint16_t tx_ts_capture_ptp_msg_type;
+ uint8_t cos_field_cfg;
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_RSVD1 0x1UL
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_MASK 0x6UL
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_SFT 1
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \
+ (0x0UL << 1)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \
+ (0x1UL << 1)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \
+ (0x2UL << 1)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \
+ (0x3UL << 1)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \
+ PORT_MAC_CFG_REQ_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK 0x18UL
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT 3
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \
+ (0x0UL << 3)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \
+ (0x1UL << 3)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \
+ (0x2UL << 3)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \
+ (0x3UL << 3)
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \
+ PORT_MAC_CFG_REQ_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_DEFAULT_COS_MASK 0xe0UL
+ #define PORT_MAC_CFG_REQ_COS_FIELD_CFG_DEFAULT_COS_SFT 5
+ uint8_t unused_0[3];
+};
+
+
+/* hwrm_port_mac_cfg_output (size:128b/16B) */
+struct hwrm_port_mac_cfg_output {
+ uint16_t error_code;
+ uint16_t req_type;
+ uint16_t seq_id;
+ uint16_t resp_len;
+ uint16_t mru;
+ uint16_t mtu;
+ uint8_t ipg;
+ uint8_t lpbk;
+ #define PORT_MAC_CFG_RESP_LPBK_NONE 0x0UL
+ #define PORT_MAC_CFG_RESP_LPBK_LOCAL 0x1UL
+ #define PORT_MAC_CFG_RESP_LPBK_REMOTE 0x2UL
+ #define PORT_MAC_CFG_RESP_LPBK_LAST PORT_MAC_CFG_RESP_LPBK_REMOTE
+ uint8_t unused_0;
+ uint8_t valid;
+};
+
+
+/**********************
+ * hwrm_port_mac_qcfg *
+ **********************/
+
+
+/* hwrm_port_mac_qcfg_input (size:192b/24B) */
+struct hwrm_port_mac_qcfg_input {
+ uint16_t req_type;
+ uint16_t cmpl_ring;
+ uint16_t seq_id;
+ uint16_t target_id;
+ uint64_t resp_addr;
+ uint16_t port_id;
+ uint8_t unused_0[6];
+};
+
+
+/* hwrm_port_mac_qcfg_output (size:192b/24B) */
+struct hwrm_port_mac_qcfg_output {
+ uint16_t error_code;
+ uint16_t req_type;
+ uint16_t seq_id;
+ uint16_t resp_len;
+ uint16_t mru;
+ uint16_t mtu;
+ uint8_t ipg;
+ uint8_t lpbk;
+ #define PORT_MAC_QCFG_RESP_LPBK_NONE 0x0UL
+ #define PORT_MAC_QCFG_RESP_LPBK_LOCAL 0x1UL
+ #define PORT_MAC_QCFG_RESP_LPBK_REMOTE 0x2UL
+ #define PORT_MAC_QCFG_RESP_LPBK_LAST PORT_MAC_QCFG_RESP_LPBK_REMOTE
+ uint8_t vlan_pri2cos_map_pri;
+ uint8_t flags;
+ #define PORT_MAC_QCFG_RESP_FLAGS_VLAN_PRI2COS_ENABLE 0x1UL
+ #define PORT_MAC_QCFG_RESP_FLAGS_TUNNEL_PRI2COS_ENABLE 0x2UL
+ #define PORT_MAC_QCFG_RESP_FLAGS_IP_DSCP2COS_ENABLE 0x4UL
+ #define PORT_MAC_QCFG_RESP_FLAGS_OOB_WOL_ENABLE 0x8UL
+ #define PORT_MAC_QCFG_RESP_FLAGS_PTP_RX_TS_CAPTURE_ENABLE 0x10UL
+ #define PORT_MAC_QCFG_RESP_FLAGS_PTP_TX_TS_CAPTURE_ENABLE 0x20UL
+ uint8_t tunnel_pri2cos_map_pri;
+ uint8_t dscp2pri_map_pri;
+ uint16_t rx_ts_capture_ptp_msg_type;
+ uint16_t tx_ts_capture_ptp_msg_type;
+ uint8_t cos_field_cfg;
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_RSVD 0x1UL
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_MASK 0x6UL
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_SFT 1
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \
+ (0x0UL << 1)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \
+ (0x1UL << 1)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \
+ (0x2UL << 1)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \
+ (0x3UL << 1)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \
+ PORT_MAC_QCFG_RESP_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK 0x18UL
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT 3
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \
+ (0x0UL << 3)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \
+ (0x1UL << 3)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \
+ (0x2UL << 3)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \
+ (0x3UL << 3)
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \
+ PORT_MAC_QCFG_RESP_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_DEFAULT_COS_MASK 0xe0UL
+ #define PORT_MAC_QCFG_RESP_COS_FIELD_CFG_DEFAULT_COS_SFT 5
+ uint8_t valid;
+};
+
+
+/**************************
+ * hwrm_port_mac_ptp_qcfg *
+ **************************/
+
+
+/* hwrm_port_mac_ptp_qcfg_input (size:192b/24B) */
+struct hwrm_port_mac_ptp_qcfg_input {
+ uint16_t req_type;
+ uint16_t cmpl_ring;
+ uint16_t seq_id;
+ uint16_t target_id;
+ uint64_t resp_addr;
+ uint16_t port_id;
+ uint8_t unused_0[6];
+};
+
+
+/* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */
+struct hwrm_port_mac_ptp_qcfg_output {
+ uint16_t error_code;
+ uint16_t req_type;
+ uint16_t seq_id;
+ uint16_t resp_len;
+ uint8_t flags;
+ #define PORT_MAC_PTP_QCFG_RESP_FLAGS_DIRECT_ACCESS 0x1UL
+ #define PORT_MAC_PTP_QCFG_RESP_FLAGS_HWRM_ACCESS 0x2UL
+ uint8_t unused_0[3];
+ uint32_t rx_ts_reg_off_lower;
+ uint32_t rx_ts_reg_off_upper;
+ uint32_t rx_ts_reg_off_seq_id;
+ uint32_t rx_ts_reg_off_src_id_0;
+ uint32_t rx_ts_reg_off_src_id_1;
+ uint32_t rx_ts_reg_off_src_id_2;
+ uint32_t rx_ts_reg_off_domain_id;
+ uint32_t rx_ts_reg_off_fifo;
+ uint32_t rx_ts_reg_off_fifo_adv;
+ uint32_t rx_ts_reg_off_granularity;
+ uint32_t tx_ts_reg_off_lower;
+ uint32_t tx_ts_reg_off_upper;
+ uint32_t tx_ts_reg_off_seq_id;
+ uint32_t tx_ts_reg_off_fifo;
+ uint32_t tx_ts_reg_off_granularity;
+ uint8_t unused_1[7];
+ uint8_t valid;
+};
+
+
/* hwrm_vnic_alloc */
/*
* Description: This VNIC is a resource in the RX side of the chip that is used
* that is used for computing RSS hash only.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is being configured to receive
+ * both RoCE and non-RoCE traffic, but forward only the RoCE
+ * traffic further. Also, RoCE traffic can be mirrored to L2
+ * driver.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
uint32_t enables;
/*
* This bit must be '1' for the dflt_ring_grp field to be
* is not configured.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured to receive both
+ * RoCE and non-RoCE traffic, but forward only RoCE traffic
+ * further. Also RoCE traffic can be mirrored to L2 driver.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
uint32_t unused_2;
uint8_t unused_3;
uint8_t unused_4;
*/
} __attribute__((packed));
+
+/* hwrm_vnic_tpa_cfg */
+/* Description: This function is used to enable/configure TPA on the VNIC. */
+/* Input (40 bytes) */
+struct hwrm_vnic_tpa_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) of non-tunneled TCP
+ * packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) of tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) according to Windows
+ * Receive Segment Coalescing (RSC) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) according to Linux
+ * Generic Receive Offload (GRO) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) for TCP packets with IP
+ * ECN set to non-zero.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) for GRE tunneled TCP
+ * packets only if all packets have the same GRE sequence.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1' and the GRO mode is enabled, the VNIC
+ * shall be configured to perform transparent packet aggregation
+ * (TPA) for TCP/IPv4 packets with consecutively increasing
+ * IPIDs. In other words, the last packet that is being
+ * aggregated to an already existing aggregation context shall
+ * have IPID 1 more than the IPID of the last packet that was
+ * aggregated in that aggregation context.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK UINT32_C(0x40)
+ /*
+ * When this bit is '1' and the GRO mode is enabled, the VNIC
+ * shall be configured to perform transparent packet aggregation
+ * (TPA) for TCP packets with the same TTL (IPv4) or Hop limit
+ * (IPv6) value.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK UINT32_C(0x80)
+ uint32_t enables;
+ /* This bit must be '1' for the max_agg_segs field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
+ /* This bit must be '1' for the max_aggs field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the max_agg_timer field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
+ /* This bit must be '1' for the min_agg_len field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
+ uint16_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t max_agg_segs;
+ /*
+ * This is the maximum number of TCP segments that can be
+ * aggregated (unit is Log2). Max value is 31.
+ */
+ /* 1 segment */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
+ /* 2 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
+ /* 4 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
+ /* 8 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
+ /* Any segment size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+ uint16_t max_aggs;
+ /*
+ * This is the maximum number of aggregations this VNIC is
+ * allowed (unit is Log2). Max value is 7
+ */
+ /* 1 aggregation */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
+ /* 2 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
+ /* 4 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
+ /* 8 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
+ /* 16 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
+ /* Any aggregation size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t max_agg_timer;
+ /*
+ * This is the maximum amount of time allowed for an aggregation
+ * context to complete after it was initiated.
+ */
+ uint32_t min_agg_len;
+ /*
+ * This is the minimum amount of payload length required to
+ * start an aggregation context.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_tpa_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_vnic_rss_cfg */
/* Description: This function is used to enable RSS configuration. */
/* Input (48 bytes) */
* the VNIC.
*/
/* Input (40 bytes) */
-
struct hwrm_vnic_plcmodes_cfg_input {
uint16_t req_type;
/*
} __attribute__((packed));
/* Output (16 bytes) */
-
struct hwrm_vnic_plcmodes_cfg_output {
uint16_t error_code;
/*
* of the VNIC.
*/
/* Input (24 bytes) */
-
struct hwrm_vnic_plcmodes_qcfg_input {
uint16_t req_type;
/*
} __attribute__((packed));
/* Output (24 bytes) */
-
struct hwrm_vnic_plcmodes_qcfg_output {
uint16_t error_code;
/*
*/
} __attribute__((packed));
-/* hwrm_vnic_tpa_cfg */
-/* Description: This function is used to enable/configure TPA on the VNIC. */
-/* Input (40 bytes) */
-struct hwrm_vnic_tpa_cfg_input {
+/* hwrm_ring_alloc */
+/*
+ * Description: This command allocates and does basic preparation for a ring.
+ */
+/* Input (80 bytes) */
+struct hwrm_ring_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
+ uint32_t enables;
+ /* This bit must be '1' for the Reserved1 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
+ /* This bit must be '1' for the ring_arb_cfg field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG UINT32_C(0x2)
+ /* This bit must be '1' for the Reserved3 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
/*
- * When this bit is '1', the VNIC shall be configured to perform
- * transparent packet aggregation (TPA) of non-tunneled TCP
- * packets.
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
*/
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC shall be configured to perform
- * transparent packet aggregation (TPA) of tunneled TCP packets.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA UINT32_C(0x2)
- /*
- * When this bit is '1', the VNIC shall be configured to perform
- * transparent packet aggregation (TPA) according to Windows
- * Receive Segment Coalescing (RSC) rules.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE UINT32_C(0x4)
- /*
- * When this bit is '1', the VNIC shall be configured to perform
- * transparent packet aggregation (TPA) according to Linux
- * Generic Receive Offload (GRO) rules.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO UINT32_C(0x8)
- /*
- * When this bit is '1', the VNIC shall be configured to perform
- * transparent packet aggregation (TPA) for TCP packets with IP
- * ECN set to non-zero.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN UINT32_C(0x10)
- /*
- * When this bit is '1', the VNIC shall be configured to perform
- * transparent packet aggregation (TPA) for GRE tunneled TCP
- * packets only if all packets have the same GRE sequence.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
- UINT32_C(0x20)
- /*
- * When this bit is '1' and the GRO mode is enabled, the VNIC
- * shall be configured to perform transparent packet aggregation
- * (TPA) for TCP/IPv4 packets with consecutively increasing
- * IPIDs. In other words, the last packet that is being
- * aggregated to an already existing aggregation context shall
- * have IPID 1 more than the IPID of the last packet that was
- * aggregated in that aggregation context.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK UINT32_C(0x40)
- /*
- * When this bit is '1' and the GRO mode is enabled, the VNIC
- * shall be configured to perform transparent packet aggregation
- * (TPA) for TCP packets with the same TTL (IPv4) or Hop limit
- * (IPv6) value.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK UINT32_C(0x80)
- uint32_t enables;
- /* This bit must be '1' for the max_agg_segs field to be configured. */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
- /* This bit must be '1' for the max_aggs field to be configured. */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
- /*
- * This bit must be '1' for the max_agg_timer field to be
- * configured.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
- /* This bit must be '1' for the min_agg_len field to be configured. */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
- uint16_t vnic_id;
- /* Logical vnic ID */
- uint16_t max_agg_segs;
- /*
- * This is the maximum number of TCP segments that can be
- * aggregated (unit is Log2). Max value is 31.
- */
- /* 1 segment */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
- /* 2 segments */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
- /* 4 segments */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
- /* 8 segments */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
- /* Any segment size larger than this is not valid */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
- uint16_t max_aggs;
- /*
- * This is the maximum number of aggregations this VNIC is
- * allowed (unit is Log2). Max value is 7
- */
- /* 1 aggregation */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
- /* 2 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
- /* 4 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
- /* 8 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
- /* 16 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
- /* Any aggregation size larger than this is not valid */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
- uint8_t unused_0;
- uint8_t unused_1;
- uint32_t max_agg_timer;
- /*
- * This is the maximum amount of time allowed for an aggregation
- * context to complete after it was initiated.
- */
- uint32_t min_agg_len;
- /*
- * This is the minimum amount of payload length required to
- * start an aggregation context.
- */
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_vnic_tpa_cfg_output {
- uint16_t error_code;
- /*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
- */
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
- /*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
- */
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
- */
-} __attribute__((packed));
-
-/* hwrm_ring_alloc */
-/*
- * Description: This command allocates and does basic preparation for a ring.
- */
-/* Input (80 bytes) */
-struct hwrm_ring_alloc_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
- */
- uint32_t enables;
- /* This bit must be '1' for the Reserved1 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
- /* This bit must be '1' for the ring_arb_cfg field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG UINT32_C(0x2)
- /* This bit must be '1' for the Reserved3 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
- /*
- * This bit must be '1' for the stat_ctx_id_valid field to be
- * configured.
- */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
- /* This bit must be '1' for the Reserved4 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
- /* This bit must be '1' for the max_bw_valid field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
- uint8_t ring_type;
- /* Ring Type. */
- /* L2 Completion Ring (CR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
- /* RoCE Notification Completion Ring (ROCE_CR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
- uint8_t unused_0;
- uint16_t unused_1;
- uint64_t page_tbl_addr;
- /* This value is a pointer to the page table for the Ring. */
- uint32_t fbo;
- /* First Byte Offset of the first entry in the first page. */
- uint8_t page_size;
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
+ /* This bit must be '1' for the Reserved4 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
+ /* This bit must be '1' for the max_bw_valid field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
+ uint8_t ring_type;
+ /* Ring Type. */
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint64_t page_tbl_addr;
+ /* This value is a pointer to the page table for the Ring. */
+ uint32_t fbo;
+ /* First Byte Offset of the first entry in the first page. */
+ uint8_t page_size;
/*
* Actual page size in 2^page_size. The supported range is
* increments in powers of 2 from 16 bytes to 1GB. - 4 = 16 B
* datagram payload
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /*
+ * IPV4 over virtual eXtensible Local Area
+ * Network (IPV4oVXLAN)
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
/* Any tunneled traffic */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
*/
} __attribute__((packed));
-/* hwrm_cfa_ntuple_filter_alloc */
-/*
- * Description: This is a ntuple filter that uses fields from L4/L3 header and
- * optionally fields from L2. The ntuple filters apply to receive traffic only.
- * All L2/L3/L4 header fields are specified in network byte order. These filters
- * can be used for Receive Flow Steering (RFS). # For ethertype value, only
- * 0x0800 (IPv4) and 0x86dd (IPv6) shall be supported for ntuple filters. # If a
- * field specified in this command is not enabled as a valid field, then that
- * field shall not be used in matching packet header fields against this filter.
- */
-/* Input (128 bytes) */
-struct hwrm_cfa_ntuple_filter_alloc_input {
+/* Command specific Error Codes (8 bytes) */
+struct hwrm_cfa_l2_set_rx_mask_cmd_err {
+ uint8_t code;
+ /*
+ * command specific error codes that goes to the cmd_err field
+ * in Common HWRM Error Response.
+ */
+ /* Unknown error */
+ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /*
+ * Unable to complete operation due to conflict
+ * with Ntuple Filter
+ */
+ #define \
+ HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \
+ UINT32_C(0x1)
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
+/* hwrm_cfa_vlan_antispoof_cfg */
+/* Description: Configures vlan anti-spoof filters for VF. */
+/* Input (32 bytes) */
+struct hwrm_cfa_vlan_antispoof_cfg_input {
uint16_t req_type;
/*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
- uint32_t flags;
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being configured. Only valid for
+ * a VF FID configured by the PF.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t num_vlan_entries;
+ /* Number of VLAN entries in the vlan_tag_mask_tbl. */
+ uint64_t vlan_tag_mask_tbl_addr;
+ /*
+ * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN antispoof
+ * table. Each table entry contains the 16-bit TPID (0x8100 or 0x88a8
+ * only), 16-bit VLAN ID, and a 16-bit mask, all in network order to
+ * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, the mask
+ * value should be 0xfff for the 12-bit VLAN ID.
+ */
+};
+
+/* Output (16 bytes) */
+struct hwrm_cfa_vlan_antispoof_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+};
+
+/* hwrm_cfa_ntuple_filter_alloc */
+/*
+ * Description: This is a ntuple filter that uses fields from L4/L3 header and
+ * optionally fields from L2. The ntuple filters apply to receive traffic only.
+ * All L2/L3/L4 header fields are specified in network byte order. These filters
+ * can be used for Receive Flow Steering (RFS). # For ethertype value, only
+ * 0x0800 (IPv4) and 0x86dd (IPv6) shall be supported for ntuple filters. # If a
+ * field specified in this command is not enabled as a valid field, then that
+ * field shall not be used in matching packet header fields against this filter.
+ */
+/* Input (128 bytes) */
+struct hwrm_cfa_ntuple_filter_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
/*
* Setting of this flag indicates the applicability to the
* loopback path.
uint8_t ip_protocol;
/*
* The value of protocol filed in IP header. Applies to UDP and
- * TCP traffic. 6 - UDP 17 - TCP
+ * TCP traffic. 6 - TCP 17 - UDP
*/
/* invalid */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
UINT32_C(0x0)
- /* UDP */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
- UINT32_C(0x6)
/* TCP */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
+ UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
UINT32_C(0x11)
uint16_t dst_id;
/*
*/
} __attribute__((packed));
+/* Command specific Error Codes (8 bytes) */
+struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
+ uint8_t code;
+ /*
+ * command specific error codes that goes to the cmd_err field
+ * in Common HWRM Error Response.
+ */
+ /* Unknown error */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /*
+ * Unable to complete operation due to conflict
+ * with Rx Mask VLAN
+ */
+ #define \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
+ UINT32_C(0x1)
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
/* hwrm_cfa_ntuple_filter_free */
/* Description: Free an ntuple filter */
/* Input (24 bytes) */
* datagram payload
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /*
+ * IPV4 over virtual eXtensible Local Area
+ * Network (IPV4oVXLAN)
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 UINT32_C(0x9)
/* Any tunneled traffic */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
uint8_t ip_protocol;
/*
* The value of protocol filed in IP header. Applies to UDP and
- * TCP traffic. 6 - UDP 17 - TCP
+ * TCP traffic. 6 - TCP 17 - UDP
*/
/* invalid */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
- /* UDP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x6)
/* TCP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x11)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11)
uint8_t unused_2;
uint8_t unused_3;
uint32_t src_ipaddr[4];
*/
} __attribute__((packed));
-
-/* hwrm_cfa_vlan_antispoof_cfg */
-/* Description: Configures vlan anti-spoof filters for VF. */
-/* Input (32 bytes) */
-struct hwrm_cfa_vlan_antispoof_cfg_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
- */
- uint16_t fid;
- /*
- * Function ID of the function that is being configured. Only valid for
- * a VF FID configured by the PF.
- */
- uint8_t unused_0;
- uint8_t unused_1;
- uint32_t num_vlan_entries;
- /* Number of VLAN entries in the vlan_tag_mask_tbl. */
- uint64_t vlan_tag_mask_tbl_addr;
- /*
- * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN antispoof
- * table. Each table entry contains the 16-bit TPID (0x8100 or 0x88a8
- * only), 16-bit VLAN ID, and a 16-bit mask, all in network order to
- * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, the mask
- * value should be 0xfff for the 12-bit VLAN ID.
- */
-};
-
-/* Output (16 bytes) */
-struct hwrm_cfa_vlan_antispoof_cfg_output {
- uint16_t error_code;
- /*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
- */
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
- /*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
- */
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
- */
-};
-
/* hwrm_tunnel_dst_port_query */
/*
* Description: This function is called by a driver to query tunnel type
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
+ /*
+ * IPV4 over virtual eXtensible Local Area
+ * Network (IPV4oVXLAN)
+ */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
uint8_t unused_0[7];
} __attribute__((packed));
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
+ /*
+ * IPV4 over virtual eXtensible Local Area
+ * Network (IPV4oVXLAN)
+ */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
uint8_t unused_0;
uint16_t tunnel_dst_port_val;
/*
#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /*
+ * IPV4 over virtual eXtensible Local Area
+ * Network (IPV4oVXLAN)
+ */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
uint8_t unused_0;
uint16_t tunnel_dst_port_id;
/*
*/
} __attribute__((packed));
-/* hwrm_stat_ctx_clr_stats */
-/* Description: This command clears statistics of a context. */
-/* Input (24 bytes) */
-struct hwrm_stat_ctx_clr_stats_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
- */
- uint32_t stat_ctx_id;
- /* ID of the statistics context that is being queried. */
- uint32_t unused_0;
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_clr_stats_output {
- uint16_t error_code;
- /*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
- */
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
- /*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
- */
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
- */
-} __attribute__((packed));
-
/* hwrm_stat_ctx_query */
/* Description: This command returns statistics of a context. */
/* Input (24 bytes) */
-
struct hwrm_stat_ctx_query_input {
uint16_t req_type;
/*
} __attribute__((packed));
/* Output (176 bytes) */
-
struct hwrm_stat_ctx_query_output {
uint16_t error_code;
/*
*/
} __attribute__((packed));
+/* hwrm_stat_ctx_clr_stats */
+/* Description: This command clears statistics of a context. */
+/* Input (24 bytes) */
+struct hwrm_stat_ctx_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_exec_fwd_resp */
/*
* Description: This command is used to send an encapsulated request to the
/* Output (24 bytes) */
struct hwrm_nvm_get_dir_info_output {
uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
uint16_t req_type;
+ /* This field returns the type of original request. */
uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
uint32_t entries;
+ /* Number of directory entries in the directory. */
uint32_t entry_length;
+ /* Size of each directory entry, in bytes. */
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
} __attribute__((packed));
-
/* hwrm_nvm_write */
+/*
+ * Note: Write to the allocated NVRAM of an item referenced by an existing
+ * directory entry.
+ */
/* Input (48 bytes) */
struct hwrm_nvm_write_input {
uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
uint64_t host_src_addr;
+ /* 64-bit Host Source Address. This is where the source data is. */
uint16_t dir_type;
+ /*
+ * The Directory Entry Type (valid values are defined in the
+ * bnxnvm_directory_type enum defined in the file
+ * bnxnvm_defs.h).
+ */
uint16_t dir_ordinal;
+ /*
+ * Directory ordinal. The 0-based instance of the combined
+ * Directory Entry Type and Extension.
+ */
uint16_t dir_ext;
+ /*
+ * The Directory Entry Extension flags (see BNX_DIR_EXT_* in the
+ * file bnxnvm_defs.h).
+ */
uint16_t dir_attr;
+ /*
+ * Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the
+ * file bnxnvm_defs.h).
+ */
uint32_t dir_data_length;
+ /*
+ * Length of data to write, in bytes. May be less than or equal
+ * to the allocated size for the directory entry. The data
+ * length stored in the directory entry will be updated to
+ * reflect this value once the write is complete.
+ */
uint16_t option;
+ /* Option. */
uint16_t flags;
- #define NVM_WRITE_REQ_FLAGS_KEEP_ORIG_ACTIVE_IMG 0x1UL
+ /*
+ * When this bit is '1', the original active image will not be
+ * removed. TBD: what purpose is this?
+ */
+ #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG UINT32_C(0x1)
uint32_t dir_item_length;
+ /*
+ * The requested length of the allocated NVM for the item, in
+ * bytes. This value may be greater than or equal to the
+ * specified data length (dir_data_length). If this value is
+ * less than the specified data length, it will be ignored. The
+ * response will contain the actual allocated item length, which
+ * may be greater than the requested item length. The purpose
+ * for allocating more than the required number of bytes for an
+ * item's data is to pre-allocate extra storage (padding) to
+ * accommodate the potential future growth of an item (e.g.
+ * upgraded firmware with a size increase, log growth, expanded
+ * configuration data).
+ */
uint32_t unused_0;
-};
+} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_nvm_write_output {
uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
uint16_t req_type;
+ /* This field returns the type of original request. */
uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
uint32_t dir_item_length;
+ /*
+ * Length of the allocated NVM for the item, in bytes. The value
+ * may be greater than or equal to the specified data length or
+ * the requested item length. The actual item length used when
+ * creating a new directory entry will be a multiple of an NVM
+ * block size.
+ */
uint16_t dir_idx;
+ /* The directory index of the created or modified item. */
uint8_t unused_0;
uint8_t valid;
-};
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_nvm_read */
+/*
+ * Note: Read the contents of an NVRAM item as referenced (indexed) by an
+ * existing directory entry.
+ */
/* Input (40 bytes) */
struct hwrm_nvm_read_input {
uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
uint64_t host_dest_addr;
+ /*
+ * 64-bit Host Destination Address. This is the host address
+ * where the data will be written to.
+ */
uint16_t dir_idx;
+ /* The 0-based index of the directory entry. */
uint8_t unused_0;
uint8_t unused_1;
uint32_t offset;
+ /* The NVRAM byte-offset to read from. */
uint32_t len;
+ /* The length of the data to be read, in bytes. */
uint32_t unused_2;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_nvm_read_output {
uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
uint16_t req_type;
+ /* This field returns the type of original request. */
uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
} __attribute__((packed));
/* Hardware Resource Manager Specification */
/* Short Command Structure (16 bytes) */
struct hwrm_short_input {
uint16_t req_type;
+ /*
+ * This field indicates the type of request in the request
+ * buffer. The format for the rest of the command (request) is
+ * determined by this field.
+ */
uint16_t signature;
- #define HWRM_SHORT_REQ_SIGNATURE_SHORT_CMD (UINT32_C(0x4321))
+ /*
+ * This field indicates a signature that is used to identify
+ * short form of the command listed here. This field shall be
+ * set to 17185 (0x4321).
+ */
+ /* Signature indicating this is a short form of HWRM command */
+ #define HWRM_SHORT_REQ_SIGNATURE_SHORT_CMD UINT32_C(0x4321)
uint16_t unused_0;
+ /* Reserved for future use. */
uint16_t size;
+ /* This value indicates the length of the request. */
uint64_t req_addr;
+ /*
+ * This is the host address where the request was written. This
+ * area must be 16B aligned.
+ */
} __attribute__((packed));
#define HWRM_GET_HWRM_ERROR_CODE(arg) \
git.droids-corp.org / dpdk.git / blobdiff