net/bnxt: fix FW rule deletion on representor create

[dpdk.git] / drivers / net / bnxt / hsi_struct_def_dpdk.h

diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 598da71..fb4f712 100644 (file)
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -35127,6 +35127,144 @@ struct hwrm_cfa_pair_info_output {
        uint8_t valid;
 } __rte_packed;
 
+/**********************
+ * hwrm_cfa_vfr_alloc *
+ **********************/
+
+
+/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */
+struct hwrm_cfa_vfr_alloc_input {
+       /* The HWRM command request type. */
+       uint16_t        req_type;
+       /*
+        * The completion ring to send the completion event on. This should
+        * be the NQ ID returned from the `nq_alloc` HWRM command.
+        */
+       uint16_t        cmpl_ring;
+       /*
+        * The sequence ID is used by the driver for tracking multiple
+        * commands. This ID is treated as opaque data by the firmware and
+        * the value is returned in the `hwrm_resp_hdr` upon completion.
+        */
+       uint16_t        seq_id;
+       /*
+        * The target ID of the command:
+        * * 0x0-0xFFF8 - The function ID
+        * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+        * * 0xFFFD - Reserved for user-space HWRM interface
+        * * 0xFFFF - HWRM
+        */
+       uint16_t        target_id;
+       /*
+        * A physical address pointer pointing to a host buffer that the
+        * command's response data will be written. This can be either a host
+        * physical address (HPA) or a guest physical address (GPA) and must
+        * point to a physically contiguous block of memory.
+        */
+       uint64_t        resp_addr;
+       /* Logical VF number (range: 0 -> MAX_VFS -1). */
+       uint16_t        vf_id;
+       /*
+        * This field is reserved for the future use.
+        * It shall be set to 0.
+        */
+       uint16_t        reserved;
+       uint8_t unused_0[4];
+       /* VF Representor name (32 byte string). */
+       char    vfr_name[32];
+} __rte_packed;
+
+/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */
+struct hwrm_cfa_vfr_alloc_output {
+       /* The specific error status for the command. */
+       uint16_t        error_code;
+       /* The HWRM command request type. */
+       uint16_t        req_type;
+       /* The sequence ID from the original command. */
+       uint16_t        seq_id;
+       /* The length of the response data in number of bytes. */
+       uint16_t        resp_len;
+       /* Rx CFA code. */
+       uint16_t        rx_cfa_code;
+       /* Tx CFA action. */
+       uint16_t        tx_cfa_action;
+       uint8_t unused_0[3];
+       /*
+        * This field is used in Output records to indicate that the output
+        * is completely written to RAM.  This field should be read as '1'
+        * to indicate that the output has been completely written.
+        * When writing a command completion or response to an internal processor,
+        * the order of writes has to be such that this field is written last.
+        */
+       uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_cfa_vfr_free *
+ *********************/
+
+
+/* hwrm_cfa_vfr_free_input (size:448b/56B) */
+struct hwrm_cfa_vfr_free_input {
+       /* The HWRM command request type. */
+       uint16_t        req_type;
+       /*
+        * The completion ring to send the completion event on. This should
+        * be the NQ ID returned from the `nq_alloc` HWRM command.
+        */
+       uint16_t        cmpl_ring;
+       /*
+        * The sequence ID is used by the driver for tracking multiple
+        * commands. This ID is treated as opaque data by the firmware and
+        * the value is returned in the `hwrm_resp_hdr` upon completion.
+        */
+       uint16_t        seq_id;
+       /*
+        * The target ID of the command:
+        * * 0x0-0xFFF8 - The function ID
+        * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+        * * 0xFFFD - Reserved for user-space HWRM interface
+        * * 0xFFFF - HWRM
+        */
+       uint16_t        target_id;
+       /*
+        * A physical address pointer pointing to a host buffer that the
+        * command's response data will be written. This can be either a host
+        * physical address (HPA) or a guest physical address (GPA) and must
+        * point to a physically contiguous block of memory.
+        */
+       uint64_t        resp_addr;
+       /* VF Representor name (32 byte string). */
+       char            vfr_name[32];
+       /* Logical VF number (range: 0 -> MAX_VFS -1). */
+       uint16_t        vf_id;
+       uint16_t        reserved;
+       uint8_t         unused_0[4];
+} __rte_packed;
+
+/* hwrm_cfa_vfr_free_output (size:128b/16B) */
+struct hwrm_cfa_vfr_free_output {
+       /* The specific error status for the command. */
+       uint16_t        error_code;
+       /* The HWRM command request type. */
+       uint16_t        req_type;
+       /* The sequence ID from the original command. */
+       uint16_t        seq_id;
+       /* The length of the response data in number of bytes. */
+       uint16_t        resp_len;
+       uint8_t unused_0[7];
+       /*
+        * This field is used in Output records to indicate that the output
+        * is completely written to RAM.  This field should be read as '1'
+        * to indicate that the output has been completely written.
+        * When writing a command completion or response to an internal processor,
+        * the order of writes has to be such that this field is written last.
+        */
+       uint8_t valid;
+} __rte_packed;
+
+
+
 /***************************************
  * hwrm_cfa_redirect_query_tunnel_type *
  ***************************************/