/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright (c) 2014-2019 Broadcom Inc.
+ * Copyright (c) 2014-2020 Broadcom Inc.
* All rights reserved.
*
* DO NOT MODIFY!!! This file is automatically generated.
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* This is the HWRM response header. */
/* hwrm_resp_hdr (size:64b/8B) */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
-} __attribute__((packed));
+} __rte_packed;
/*
* TLV encapsulated message. Use the TLV type field of the
#define TLV_TYPE_ENGINE_CKV_AUTH_TAG UINT32_C(0x8004)
/* Engine CKV - The encrypted data. */
#define TLV_TYPE_ENGINE_CKV_CIPHERTEXT UINT32_C(0x8005)
-/* Engine CKV - Supported algorithms. */
-#define TLV_TYPE_ENGINE_CKV_ALGORITHMS UINT32_C(0x8006)
+/* Engine CKV - Supported host_algorithms. */
+#define TLV_TYPE_ENGINE_CKV_HOST_ALGORITHMS UINT32_C(0x8006)
/* Engine CKV - The Host EC curve name and ECC public key information. */
#define TLV_TYPE_ENGINE_CKV_HOST_ECC_PUBLIC_KEY UINT32_C(0x8007)
/* Engine CKV - The ECDSA signature. */
#define TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE UINT32_C(0x8008)
-/* Engine CKV - The SRT EC curve name and ECC public key information. */
-#define TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY UINT32_C(0x8009)
+/* Engine CKV - The firmware EC curve name and ECC public key information. */
+#define TLV_TYPE_ENGINE_CKV_FW_ECC_PUBLIC_KEY UINT32_C(0x8009)
+/* Engine CKV - Supported firmware algorithms. */
+#define TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS UINT32_C(0x800a)
#define TLV_TYPE_LAST \
- TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY
+ TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS
/* tlv (size:64b/8B) */
* and it must be an integer multiple of 8B.
*/
uint16_t length;
-} __attribute__((packed));
+} __rte_packed;
/* Input */
/* input (size:128b/16B) */
* and must be cleared to zero before the request is made.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* Output */
/* output (size:64b/8B) */
* memory.
*/
uint16_t resp_len;
-} __attribute__((packed));
+} __rte_packed;
/* Short Command Structure */
/* hwrm_short_input (size:128b/16B) */
* This area must be 16B aligned.
*/
uint64_t req_addr;
-} __attribute__((packed));
+} __rte_packed;
/*
* Command numbering
#define HWRM_QUEUE_PRI2COS_CFG UINT32_C(0x38)
#define HWRM_QUEUE_COS2BW_QCFG UINT32_C(0x39)
#define HWRM_QUEUE_COS2BW_CFG UINT32_C(0x3a)
- /* Experimental */
#define HWRM_QUEUE_DSCP_QCAPS UINT32_C(0x3b)
- /* Experimental */
#define HWRM_QUEUE_DSCP2PRI_QCFG UINT32_C(0x3c)
- /* Experimental */
#define HWRM_QUEUE_DSCP2PRI_CFG UINT32_C(0x3d)
#define HWRM_VNIC_ALLOC UINT32_C(0x40)
#define HWRM_VNIC_FREE UINT32_C(0x41)
#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS UINT32_C(0x52)
#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS UINT32_C(0x53)
#define HWRM_RING_AGGINT_QCAPS UINT32_C(0x54)
+ #define HWRM_RING_SQ_ALLOC UINT32_C(0x55)
+ #define HWRM_RING_SQ_CFG UINT32_C(0x56)
+ #define HWRM_RING_SQ_FREE UINT32_C(0x57)
#define HWRM_RING_RESET UINT32_C(0x5e)
#define HWRM_RING_GRP_ALLOC UINT32_C(0x60)
#define HWRM_RING_GRP_FREE UINT32_C(0x61)
+ #define HWRM_RING_CFG UINT32_C(0x62)
+ #define HWRM_RING_QCFG UINT32_C(0x63)
/* Reserved for future use. */
#define HWRM_RESERVED5 UINT32_C(0x64)
/* Reserved for future use. */
#define HWRM_RESERVED6 UINT32_C(0x65)
#define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC UINT32_C(0x70)
#define HWRM_VNIC_RSS_COS_LB_CTX_FREE UINT32_C(0x71)
+ #define HWRM_QUEUE_MPLS_QCAPS UINT32_C(0x80)
+ #define HWRM_QUEUE_MPLSTC2PRI_QCFG UINT32_C(0x81)
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG UINT32_C(0x82)
#define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90)
#define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91)
#define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92)
#define HWRM_PORT_QSTATS_EXT UINT32_C(0xb4)
#define HWRM_PORT_PHY_MDIO_WRITE UINT32_C(0xb5)
#define HWRM_PORT_PHY_MDIO_READ UINT32_C(0xb6)
+ #define HWRM_PORT_PHY_MDIO_BUS_ACQUIRE UINT32_C(0xb7)
+ #define HWRM_PORT_PHY_MDIO_BUS_RELEASE UINT32_C(0xb8)
+ #define HWRM_PORT_QSTATS_EXT_PFC_WD UINT32_C(0xb9)
+ #define HWRM_PORT_ECN_QSTATS UINT32_C(0xba)
#define HWRM_FW_RESET UINT32_C(0xc0)
#define HWRM_FW_QSTATUS UINT32_C(0xc1)
#define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2)
#define HWRM_FW_SYNC UINT32_C(0xc3)
- #define HWRM_FW_STATE_BUFFER_QCAPS UINT32_C(0xc4)
+ #define HWRM_FW_STATE_QCAPS UINT32_C(0xc4)
#define HWRM_FW_STATE_QUIESCE UINT32_C(0xc5)
#define HWRM_FW_STATE_BACKUP UINT32_C(0xc6)
#define HWRM_FW_STATE_RESTORE UINT32_C(0xc7)
#define HWRM_FW_GET_STRUCTURED_DATA UINT32_C(0xcb)
/* Experimental */
#define HWRM_FW_IPC_MAILBOX UINT32_C(0xcc)
+ #define HWRM_FW_ECN_CFG UINT32_C(0xcd)
+ #define HWRM_FW_ECN_QCFG UINT32_C(0xce)
#define HWRM_EXEC_FWD_RESP UINT32_C(0xd0)
#define HWRM_REJECT_FWD_RESP UINT32_C(0xd1)
#define HWRM_FWD_RESP UINT32_C(0xd2)
#define HWRM_OEM_CMD UINT32_C(0xd4)
/* Tells the fw to run PRBS test on a given port and lane. */
#define HWRM_PORT_PRBS_TEST UINT32_C(0xd5)
+ #define HWRM_PORT_SFP_SIDEBAND_CFG UINT32_C(0xd6)
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG UINT32_C(0xd7)
+ #define HWRM_FW_STATE_UNQUIESCE UINT32_C(0xd8)
+ /* Tells the fw to collect dsc dump on a given port and lane. */
+ #define HWRM_PORT_DSC_DUMP UINT32_C(0xd9)
#define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0)
+ #define HWRM_REG_POWER_QUERY UINT32_C(0xe1)
+ #define HWRM_CORE_FREQUENCY_QUERY UINT32_C(0xe2)
+ #define HWRM_REG_POWER_HISTOGRAM UINT32_C(0xe3)
#define HWRM_WOL_FILTER_ALLOC UINT32_C(0xf0)
#define HWRM_WOL_FILTER_FREE UINT32_C(0xf1)
#define HWRM_WOL_FILTER_QCFG UINT32_C(0xf2)
#define HWRM_CFA_EEM_OP UINT32_C(0x123)
/* Experimental */
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124)
- /* Experimental */
+ /* Experimental - DEPRECATED */
#define HWRM_CFA_TFLIB UINT32_C(0x125)
/* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */
#define HWRM_ENGINE_CKV_STATUS UINT32_C(0x12e)
#define HWRM_ENGINE_STATS_CLEAR UINT32_C(0x156)
/* Engine - Query the statistics accumulator for an Engine. */
#define HWRM_ENGINE_STATS_QUERY UINT32_C(0x157)
+ /* Engine - Query statistics counters for continuous errors from all CDDIP Engines. */
+ #define HWRM_ENGINE_STATS_QUERY_CONTINUOUS_ERROR UINT32_C(0x158)
/* Engine - Allocate an Engine RQ. */
#define HWRM_ENGINE_RQ_ALLOC UINT32_C(0x15e)
/* Engine - Free an Engine RQ. */
#define HWRM_FUNC_VF_BW_QCFG UINT32_C(0x196)
/* Queries pf ids belong to specified host(s) */
#define HWRM_FUNC_HOST_PF_IDS_QUERY UINT32_C(0x197)
+ /* Queries extended stats per function */
+ #define HWRM_FUNC_QSTATS_EXT UINT32_C(0x198)
+ /* Queries extended statistics context */
+ #define HWRM_STAT_EXT_CTX_QUERY UINT32_C(0x199)
/* Experimental */
#define HWRM_SELFTEST_QLIST UINT32_C(0x200)
/* Experimental */
* to the host test.
*/
#define HWRM_MFG_HDMA_TEST UINT32_C(0x209)
+ /* Tells the fw to program the fru memory */
+ #define HWRM_MFG_FRU_EEPROM_WRITE UINT32_C(0x20a)
+ /* Tells the fw to read the fru memory */
+ #define HWRM_MFG_FRU_EEPROM_READ UINT32_C(0x20b)
+ /* Experimental */
+ #define HWRM_TF UINT32_C(0x2bc)
+ /* Experimental */
+ #define HWRM_TF_VERSION_GET UINT32_C(0x2bd)
+ /* Experimental */
+ #define HWRM_TF_SESSION_OPEN UINT32_C(0x2c6)
+ /* Experimental */
+ #define HWRM_TF_SESSION_ATTACH UINT32_C(0x2c7)
+ /* Experimental */
+ #define HWRM_TF_SESSION_REGISTER UINT32_C(0x2c8)
+ /* Experimental */
+ #define HWRM_TF_SESSION_UNREGISTER UINT32_C(0x2c9)
+ /* Experimental */
+ #define HWRM_TF_SESSION_CLOSE UINT32_C(0x2ca)
+ /* Experimental */
+ #define HWRM_TF_SESSION_QCFG UINT32_C(0x2cb)
+ /* Experimental */
+ #define HWRM_TF_SESSION_RESC_QCAPS UINT32_C(0x2cc)
+ /* Experimental */
+ #define HWRM_TF_SESSION_RESC_ALLOC UINT32_C(0x2cd)
+ /* Experimental */
+ #define HWRM_TF_SESSION_RESC_FREE UINT32_C(0x2ce)
+ /* Experimental */
+ #define HWRM_TF_SESSION_RESC_FLUSH UINT32_C(0x2cf)
+ /* Experimental */
+ #define HWRM_TF_TBL_TYPE_GET UINT32_C(0x2da)
+ /* Experimental */
+ #define HWRM_TF_TBL_TYPE_SET UINT32_C(0x2db)
+ /* Experimental */
+ #define HWRM_TF_CTXT_MEM_RGTR UINT32_C(0x2e4)
+ /* Experimental */
+ #define HWRM_TF_CTXT_MEM_UNRGTR UINT32_C(0x2e5)
+ /* Experimental */
+ #define HWRM_TF_EXT_EM_QCAPS UINT32_C(0x2e6)
+ /* Experimental */
+ #define HWRM_TF_EXT_EM_OP UINT32_C(0x2e7)
+ /* Experimental */
+ #define HWRM_TF_EXT_EM_CFG UINT32_C(0x2e8)
+ /* Experimental */
+ #define HWRM_TF_EXT_EM_QCFG UINT32_C(0x2e9)
+ /* Experimental */
+ #define HWRM_TF_EM_INSERT UINT32_C(0x2ea)
+ /* Experimental */
+ #define HWRM_TF_EM_DELETE UINT32_C(0x2eb)
+ /* Experimental */
+ #define HWRM_TF_TCAM_SET UINT32_C(0x2f8)
+ /* Experimental */
+ #define HWRM_TF_TCAM_GET UINT32_C(0x2f9)
+ /* Experimental */
+ #define HWRM_TF_TCAM_MOVE UINT32_C(0x2fa)
+ /* Experimental */
+ #define HWRM_TF_TCAM_FREE UINT32_C(0x2fb)
+ /* Experimental */
+ #define HWRM_TF_GLOBAL_CFG_SET UINT32_C(0x2fc)
+ /* Experimental */
+ #define HWRM_TF_GLOBAL_CFG_GET UINT32_C(0x2fd)
+ /* Experimental */
+ #define HWRM_SV UINT32_C(0x400)
/* Experimental */
#define HWRM_DBG_READ_DIRECT UINT32_C(0xff10)
/* Experimental */
#define HWRM_DBG_CRASHDUMP_HEADER UINT32_C(0xff1d)
/* Experimental */
#define HWRM_DBG_CRASHDUMP_ERASE UINT32_C(0xff1e)
+ /* Send driver debug information to firmware */
+ #define HWRM_DBG_DRV_TRACE UINT32_C(0xff1f)
+ /* Query debug capabilities of firmware */
+ #define HWRM_DBG_QCAPS UINT32_C(0xff20)
+ /* Retrieve debug settings of firmware */
+ #define HWRM_DBG_QCFG UINT32_C(0xff21)
+ /* Set destination parameters for crashdump medium */
+ #define HWRM_DBG_CRASHDUMP_MEDIUM_CFG UINT32_C(0xff22)
+ #define HWRM_NVM_REQ_ARBITRATION UINT32_C(0xffed)
/* Experimental */
#define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee)
#define HWRM_NVM_VALIDATE_OPTION UINT32_C(0xffef)
#define HWRM_NVM_RAW_WRITE_BLK UINT32_C(0xffff)
#define HWRM_LAST HWRM_NVM_RAW_WRITE_BLK
uint16_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* Return Codes */
/* ret_codes (size:64b/8B) */
#define HWRM_ERR_CODE_HOT_RESET_FAIL UINT32_C(0xb)
/*
* This error code is only reported by the firmware when during
- * flow allocation when a requeest for a flow counter fails because
+ * flow allocation when a request for a flow counter fails because
* the number of flow counters are exhausted.
*/
#define HWRM_ERR_CODE_NO_FLOW_COUNTER_DURING_ALLOC UINT32_C(0xc)
* internal error.
*/
#define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf)
+ /*
+ * Firmware is unable to service the request at the present time. Caller
+ * may try again later.
+ */
+ #define HWRM_ERR_CODE_BUSY UINT32_C(0x10)
/*
* This value indicates that the HWRM response is in TLV format and
* should be interpreted as one or more TLVs starting with the
- * hwrm_resp_hdr TLV. This value is not an indicatation of any error
- * by itself, just an indicatation that the response should be parsed
+ * hwrm_resp_hdr TLV. This value is not an indication of any error
+ * by itself, just an indication that the response should be parsed
* as TLV and the actual error code will be in the hwrm_resp_hdr TLV.
*/
#define HWRM_ERR_CODE_TLV_ENCAPSULATED_RESPONSE UINT32_C(0x8000)
#define HWRM_ERR_CODE_LAST \
HWRM_ERR_CODE_CMD_NOT_SUPPORTED
uint16_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* Output */
/* hwrm_err_output (size:128b/16B) */
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*
* Following is the signature for HWRM message field that indicates not
* applicable (All F's). Need to cast it the size of the field if needed.
#define HWRM_TARGET_ID_TOOLS 0xFFFD
#define HWRM_VERSION_MAJOR 1
#define HWRM_VERSION_MINOR 10
-#define HWRM_VERSION_UPDATE 0
+#define HWRM_VERSION_UPDATE 1
/* non-zero means beta version */
-#define HWRM_VERSION_RSVD 91
-#define HWRM_VERSION_STR "1.10.0.91"
+#define HWRM_VERSION_RSVD 48
+#define HWRM_VERSION_STR "1.10.1.48"
/****************
* hwrm_ver_get *
*/
uint8_t hwrm_intf_upd;
uint8_t unused_0[5];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ver_get_output (size:1408b/176B) */
struct hwrm_ver_get_output {
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_ADV_FLOW_MGNT_SUPPORTED \
UINT32_C(0x1000)
/*
+ * Deprecated and replaced with cfa_truflow_supported.
* If set to 1, the firmware is able to support TFLIB features.
* If set to 0, then the firmware doesn’t support TFLIB features.
* By default, this flag should be 0 for older version of core firmware.
*/
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_TFLIB_SUPPORTED \
UINT32_C(0x2000)
+ /*
+ * If set to 1, the firmware is able to support TruFlow features.
+ * If set to 0, then the firmware doesn’t support TruFlow features.
+ * By default, this flag should be 0 for older version of
+ * core firmware.
+ */
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_TRUFLOW_SUPPORTED \
+ UINT32_C(0x4000)
/*
* This field represents the major version of RoCE firmware.
* A change in major version represents a major release.
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* bd_base (size:64b/8B) */
struct bd_base {
#define BD_BASE_TYPE_TX_BD_SHORT UINT32_C(0x0)
/*
* Indicates that this BD is 1BB long and is an empty
- * TX BD. Not valid for use by the driver.
+ * TX BD. Not valid for use by the driver.
*/
#define BD_BASE_TYPE_TX_BD_EMPTY UINT32_C(0x1)
/*
* Indicates that this BD is 16B long and is an RX Producer
- * (ie. empty) buffer descriptor.
+ * (i.e. empty) buffer descriptor.
*/
#define BD_BASE_TYPE_RX_PROD_PKT UINT32_C(0x4)
/*
#define BD_BASE_TYPE_TX_BD_LONG_INLINE UINT32_C(0x11)
#define BD_BASE_TYPE_LAST BD_BASE_TYPE_TX_BD_LONG_INLINE
uint8_t unused_1[7];
-} __attribute__((packed));
+} __rte_packed;
/* tx_bd_short (size:128b/16B) */
struct tx_bd_short {
#define TX_BD_SHORT_FLAGS_SFT 6
/*
* If set to 1, the packet ends with the data in the buffer
- * pointed to by this descriptor. This flag must be
+ * pointed to by this descriptor. This flag must be
* valid on every BD.
*/
#define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40)
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet.
* A value of 1 indicates that this BD is the only BD (and that
- * the it is a short BD). A value
+ * it is a short BD). A value
* of 3 indicates either 3 short BDs or 1 long BD and one short
- * BD in the packet. A value of 0 indicates
+ * BD in the packet. A value of 0 indicates
* that there are 32 BD locations in the packet (the maximum).
*
* This field is valid only on the first BD of a packet.
* This value must be valid on all BDs of a packet.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* tx_bd_long (size:128b/16B) */
struct tx_bd_long {
#define TX_BD_LONG_FLAGS_SFT 6
/*
* If set to 1, the packet ends with the data in the buffer
- * pointed to by this descriptor. This flag must be
+ * pointed to by this descriptor. This flag must be
* valid on every BD.
*/
#define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40)
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet.
* A value of 1 indicates that this BD is the only BD (and that
- * the it is a short BD). A value
+ * it is a short BD). A value
* of 3 indicates either 3 short BDs or 1 long BD and one short
- * BD in the packet. A value of 0 indicates
+ * BD in the packet. A value of 0 indicates
* that there are 32 BD locations in the packet (the maximum).
*
* This field is valid only on the first BD of a packet.
* This value must be valid on all BDs of a packet.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* Last 16 bytes of tx_bd_long. */
/* tx_bd_long_hi (size:128b/16B) */
*/
#define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1)
/*
- * If set to 1, the controller replaces the IP checksum of the
+ * If set to 1, the controller replaces the IP checksum of the
* normal packets, or the inner IP checksum of the encapsulated
* packets with the hardware calculated IP checksum for the
* packet associated with this descriptor.
*
* This bit must be valid on the first BD of a packet.
*
- * Packet must be 64B or longer when this flag is set. It is not
+ * Packet must be 64B or longer when this flag is set. It is not
* useful to use this bit with any form of TX offload such as
- * CSO or LSO. The intent is that the packet from the host already
+ * CSO or LSO. The intent is that the packet from the host already
* has a valid Ethernet CRC on the packet.
*/
#define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4)
*/
#define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10)
/*
- * If set to 1, the device will treat this packet with LSO(Large
+ * If set to 1, the device will treat this packet with LSO(Large
* Send Offload) processing for both normal or encapsulated
- * packets, which is a form of TCP segmentation. When this bit
+ * packets, which is a form of TCP segmentation. When this bit
* is 1, the hdr_size and mss fields must be valid. The driver
* doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum
* flags since the controller will replace the appropriate
#define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80)
/*
* If set to '1', then the RoCE ICRC will be appended to the
- * packet. Packet must be a valid RoCE format packet.
+ * packet. Packet must be a valid RoCE format packet.
*/
#define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100)
/*
* If set to '1', then the FCoE CRC will be appended to the
- * packet. Packet must be a valid FCoE format packet.
+ * packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200)
uint16_t hdr_size;
/*
* When LSO is '1', this field must contain the offset of the
* TCP payload from the beginning of the packet in as
- * 16b words. In case of encapsulated/tunneling packet, this field
+ * 16b words. In case of encapsulated/tunneling packet, this field
* contains the offset of the inner TCP payload from beginning of the
* packet as 16-bit words.
*
#define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
#define TX_BD_LONG_CFA_META_KEY_LAST \
TX_BD_LONG_CFA_META_KEY_VLAN_TAG
-} __attribute__((packed));
+} __rte_packed;
/*
* This structure is used to inform the NIC of packet data that needs to be
#define TX_BD_LONG_INLINE_FLAGS_SFT 6
/*
* If set to 1, the packet ends with the data in the buffer
- * pointed to by this descriptor. This flag must be
+ * pointed to by this descriptor. This flag must be
* valid on every BD.
*/
#define TX_BD_LONG_INLINE_FLAGS_PACKET_END UINT32_C(0x40)
#define TX_BD_LONG_INLINE_LFLAGS_T_IPID UINT32_C(0x80)
/*
* If set to '1', then the RoCE ICRC will be appended to the
- * packet. Packet must be a valid RoCE format packet.
+ * packet. Packet must be a valid RoCE format packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_ROCE_CRC UINT32_C(0x100)
/*
* If set to '1', then the FCoE CRC will be appended to the
- * packet. Packet must be a valid FCoE format packet.
+ * packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC UINT32_C(0x200)
uint16_t unused2;
(UINT32_C(0x1) << 28)
#define TX_BD_LONG_INLINE_CFA_META_KEY_LAST \
TX_BD_LONG_INLINE_CFA_META_KEY_VLAN_TAG
-} __attribute__((packed));
+} __rte_packed;
/* tx_bd_empty (size:128b/16B) */
struct tx_bd_empty {
#define TX_BD_EMPTY_TYPE_SFT 0
/*
* Indicates that this BD is 1BB long and is an empty
- * TX BD. Not valid for use by the driver.
+ * TX BD. Not valid for use by the driver.
*/
#define TX_BD_EMPTY_TYPE_TX_BD_EMPTY UINT32_C(0x1)
#define TX_BD_EMPTY_TYPE_LAST TX_BD_EMPTY_TYPE_TX_BD_EMPTY
uint8_t unused_2;
uint8_t unused_3[3];
uint8_t unused_4[8];
-} __attribute__((packed));
+} __rte_packed;
/* rx_prod_pkt_bd (size:128b/16B) */
struct rx_prod_pkt_bd {
#define RX_PROD_PKT_BD_TYPE_SFT 0
/*
* Indicates that this BD is 16B long and is an RX Producer
- * (ie. empty) buffer descriptor.
+ * (i.e. empty) buffer descriptor.
*/
#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4)
#define RX_PROD_PKT_BD_TYPE_LAST \
#define RX_PROD_PKT_BD_FLAGS_SFT 6
/*
* If set to 1, the packet will be placed at the address plus
- * 2B. The 2 Bytes of padding will be written as zero.
+ * 2B. The 2 Bytes of padding will be written as zero.
*/
#define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40)
/*
#define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80)
/*
* This value is the number of additional buffers in the ring that
- * describe the buffer space to be consumed for the this packet.
+ * describe the buffer space to be consumed for this packet.
* If the value is zero, then the packet must fit within the
- * space described by this BD. If this value is 1 or more, it
+ * space described by this BD. If this value is 1 or more, it
* indicates how many additional "buffer" BDs are in the ring
* immediately following this BD to be used for the same
* network packet.
uint32_t opaque;
/*
* This is the host physical address where data for the packet may
- * by placed in host memory.
+ * be placed in host memory.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* rx_prod_bfr_bd (size:128b/16B) */
struct rx_prod_bfr_bd {
uint32_t opaque;
/*
* This is the host physical address where data for the packet may
- * by placed in host memory.
+ * be placed in host memory.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* rx_prod_agg_bd (size:128b/16B) */
struct rx_prod_agg_bd {
uint32_t opaque;
/*
* This is the host physical address where data for the packet may
- * by placed in host memory.
+ * be placed in host memory.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* cmpl_base (size:128b/16B) */
struct cmpl_base {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define CMPL_BASE_TYPE_MASK UINT32_C(0x3f)
#define CMPL_BASE_TYPE_SFT 0
/*
* TX L2 completion:
- * Completion of TX packet. Length = 16B
+ * Completion of TX packet. Length = 16B
*/
#define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0)
+ /*
+ * NO-OP completion:
+ * Completion of NO-OP. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_NO_OP UINT32_C(0x1)
+ /*
+ * TX L2 coalesced completion:
+ * Completion of coalesced TX packet. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_TX_L2_COAL UINT32_C(0x2)
+ /*
+ * TX L2 PTP completion:
+ * Completion of PTP TX packet. Length = 32B
+ */
+ #define CMPL_BASE_TYPE_TX_L2_PTP UINT32_C(0x3)
+ /*
+ * RX L2 TPA Start V2 Completion:
+ * Completion of and L2 RX packet. Length = 32B
+ * This is the new version of the RX_TPA_START completion used
+ * in SR2 and later chips.
+ */
+ #define CMPL_BASE_TYPE_RX_TPA_START_V2 UINT32_C(0xd)
+ /*
+ * RX L2 V2 completion:
+ * Completion of and L2 RX packet. Length = 32B
+ * This is the new version of the RX_L2 completion used in SR2
+ * and later chips.
+ */
+ #define CMPL_BASE_TYPE_RX_L2_V2 UINT32_C(0xf)
/*
* RX L2 completion:
* Completion of and L2 RX packet. Length = 32B
/*
* RX Aggregation Buffer completion :
* Completion of an L2 aggregation buffer in support of
- * TPA, HDS, or Jumbo packet completion. Length = 16B
+ * TPA, HDS, or Jumbo packet completion. Length = 16B
*/
#define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12)
/*
* Length = 16B
*/
#define CMPL_BASE_TYPE_STAT_EJECT UINT32_C(0x1a)
+ /*
+ * VEE Flush Completion:
+ * This completion is inserted manually by
+ * the Primate and processed by the VEE hardware to ensure that
+ * all completions on a VEE function have been processed by the
+ * VEE hardware before FLR process is completed.
+ */
+ #define CMPL_BASE_TYPE_VEE_FLUSH UINT32_C(0x1c)
+ /*
+ * Mid Path Short Completion :
+ * Completion of a Mid Path Command. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_MID_PATH_SHORT UINT32_C(0x1e)
+ /*
+ * Mid Path Long Completion :
+ * Completion of a Mid Path Command. Length = 32B
+ */
+ #define CMPL_BASE_TYPE_MID_PATH_LONG UINT32_C(0x1f)
/*
* HWRM Command Completion:
* Completion of an HWRM command.
uint32_t info2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
uint32_t info3_v;
#define CMPL_BASE_V UINT32_C(0x1)
#define CMPL_BASE_INFO3_SFT 1
/* info4 is 32 b */
uint32_t info4;
-} __attribute__((packed));
+} __rte_packed;
/* tx_cmpl (size:128b/16B) */
struct tx_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define TX_CMPL_TYPE_MASK UINT32_C(0x3f)
#define TX_CMPL_TYPE_SFT 0
/*
* TX L2 completion:
- * Completion of TX packet. Length = 16B
+ * Completion of TX packet. Length = 16B
*/
#define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0)
#define TX_CMPL_TYPE_LAST TX_CMPL_TYPE_TX_L2
#define TX_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
#define TX_CMPL_FLAGS_ERROR UINT32_C(0x40)
/*
* When this bit is '1', it indicates that the packet completed
* was transmitted using the push acceleration data provided
- * by the driver. When this bit is '0', it indicates that the
+ * by the driver. When this bit is '0', it indicates that the
* packet had not push acceleration data written or was executed
* as a normal packet even though push data was provided.
*/
uint16_t unused_0;
/*
* This is a copy of the opaque field from the first TX BD of this
- * transmitted packet.
+ * transmitted packet. Note that, if the packet was described by a short
+ * CSO or short CSO inline BD, then the 16-bit opaque field from the
+ * short CSO BD will appear in the bottom 16 bits of this field.
*/
uint32_t opaque;
uint16_t errors_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define TX_CMPL_V UINT32_C(0x1)
- #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe)
- #define TX_CMPL_ERRORS_SFT 1
+ #define TX_CMPL_V UINT32_C(0x1)
+ #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define TX_CMPL_ERRORS_SFT 1
/*
* This error indicates that there was some sort of problem
* with the BDs for the packet.
*/
- #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
- #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/* No error */
- #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1)
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 1)
/*
* Bad Format:
* BDs were not formatted correctly.
*/
- #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1)
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT \
+ (UINT32_C(0x2) << 1)
#define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
/*
* When this bit is '1', it indicates that the length of
- * the packet was zero. No packet was transmitted.
+ * the packet was zero. No packet was transmitted.
*/
- #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
+ #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
/*
* When this bit is '1', it indicates that the packet
* was longer than the programmed limit in TDI. No
* packet was transmitted.
*/
- #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
+ #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
/*
* When this bit is '1', it indicates that one or more of the
* BDs associated with this packet generated a PCI error.
* This probably means the address was not valid.
*/
- #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40)
+ #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40)
/*
* When this bit is '1', it indicates that the packet was longer
- * than indicated by the hint. No packet was transmitted.
+ * than indicated by the hint. No packet was transmitted.
*/
- #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
+ #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
/*
* When this bit is '1', it indicates that the packet was
* dropped due to Poison TLP error on one or more of the
* TLPs in the PXP completion.
*/
- #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100)
+ #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that the packet was dropped
+ * due to a transient internal error in TDC. The packet or LSO can
+ * be retried and may transmit successfully on a subsequent attempt.
+ */
+ #define TX_CMPL_ERRORS_INTERNAL_ERROR UINT32_C(0x200)
+ /*
+ * When this bit is '1', it was not possible to collect a a timestamp
+ * for a PTP completion, in which case the timestamp_hi and
+ * timestamp_lo fields are invalid. When this bit is '0' for a PTP
+ * completion, the timestamp_hi and timestamp_lo fields are valid.
+ * RJRN will copy the value of this bit into the field of the same
+ * name in all TX completions, regardless of whether such completions
+ * are PTP completions or other TX completions.
+ */
+ #define TX_CMPL_ERRORS_TIMESTAMP_INVALID_ERROR UINT32_C(0x400)
/* unused2 is 16 b */
uint16_t unused_1;
/* unused3 is 32 b */
uint32_t unused_2;
-} __attribute__((packed));
+} __rte_packed;
+
+/* tx_cmpl_coal (size:128b/16B) */
+struct tx_cmpl_coal {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define TX_CMPL_COAL_TYPE_MASK UINT32_C(0x3f)
+ #define TX_CMPL_COAL_TYPE_SFT 0
+ /*
+ * TX L2 coalesced completion:
+ * Completion of TX packet. Length = 16B
+ */
+ #define TX_CMPL_COAL_TYPE_TX_L2_COAL UINT32_C(0x2)
+ #define TX_CMPL_COAL_TYPE_LAST TX_CMPL_COAL_TYPE_TX_L2_COAL
+ #define TX_CMPL_COAL_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_CMPL_COAL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define TX_CMPL_COAL_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet completed
+ * was transmitted using the push acceleration data provided
+ * by the driver. When this bit is '0', it indicates that the
+ * packet had not push acceleration data written or was executed
+ * as a normal packet even though push data was provided.
+ */
+ #define TX_CMPL_COAL_FLAGS_PUSH UINT32_C(0x80)
+ /* unused1 is 16 b */
+ uint16_t unused_0;
+ /*
+ * This is a copy of the opaque field from the first TX BD of the packet
+ * which corresponds with the reported sq_cons_idx. Note that, with
+ * coalesced completions, completions are generated for only some of the
+ * packets. The driver will see the opaque field for only those packets.
+ * Note that, if the packet was described by a short CSO or short CSO
+ * inline BD, then the 16-bit opaque field from the short CSO BD will
+ * appear in the bottom 16 bits of this field. For TX rings with
+ * completion coalescing enabled (which would use the coalesced
+ * completion record), it is suggested that the driver populate the
+ * opaque field to indicate the specific TX ring with which the
+ * completion is associated, then utilize the opaque and sq_cons_idx
+ * fields in the coalesced completion record to determine the specific
+ * packets that are to be completed on that ring.
+ */
+ uint32_t opaque;
+ uint16_t errors_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define TX_CMPL_COAL_V UINT32_C(0x1)
+ #define TX_CMPL_COAL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define TX_CMPL_COAL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem
+ * with the BDs for the packet.
+ */
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No error */
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_BAD_FMT \
+ (UINT32_C(0x2) << 1)
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_LAST \
+ TX_CMPL_COAL_ERRORS_BUFFER_ERROR_BAD_FMT
+ /*
+ * When this bit is '1', it indicates that the length of
+ * the packet was zero. No packet was transmitted.
+ */
+ #define TX_CMPL_COAL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
+ /*
+ * When this bit is '1', it indicates that the packet
+ * was longer than the programmed limit in TDI. No
+ * packet was transmitted.
+ */
+ #define TX_CMPL_COAL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
+ /*
+ * When this bit is '1', it indicates that one or more of the
+ * BDs associated with this packet generated a PCI error.
+ * This probably means the address was not valid.
+ */
+ #define TX_CMPL_COAL_ERRORS_DMA_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet was longer
+ * than indicated by the hint. No packet was transmitted.
+ */
+ #define TX_CMPL_COAL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that the packet was
+ * dropped due to Poison TLP error on one or more of the
+ * TLPs in the PXP completion.
+ */
+ #define TX_CMPL_COAL_ERRORS_POISON_TLP_ERROR \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that the packet was dropped
+ * due to a transient internal error in TDC. The packet or LSO can
+ * be retried and may transmit successfully on a subsequent attempt.
+ */
+ #define TX_CMPL_COAL_ERRORS_INTERNAL_ERROR \
+ UINT32_C(0x200)
+ /*
+ * When this bit is '1', it was not possible to collect a a timestamp
+ * for a PTP completion, in which case the timestamp_hi and
+ * timestamp_lo fields are invalid. When this bit is '0' for a PTP
+ * completion, the timestamp_hi and timestamp_lo fields are valid.
+ * RJRN will copy the value of this bit into the field of the same
+ * name in all TX completions, regardless of whether such
+ * completions are PTP completions or other TX completions.
+ */
+ #define TX_CMPL_COAL_ERRORS_TIMESTAMP_INVALID_ERROR \
+ UINT32_C(0x400)
+ /* unused2 is 16 b */
+ uint16_t unused_1;
+ uint32_t sq_cons_idx;
+ /*
+ * This value is SQ index for the start of the packet following the
+ * last completed packet.
+ */
+ #define TX_CMPL_COAL_SQ_CONS_IDX_MASK UINT32_C(0xffffff)
+ #define TX_CMPL_COAL_SQ_CONS_IDX_SFT 0
+} __rte_packed;
+
+/* tx_cmpl_ptp (size:128b/16B) */
+struct tx_cmpl_ptp {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define TX_CMPL_PTP_TYPE_MASK UINT32_C(0x3f)
+ #define TX_CMPL_PTP_TYPE_SFT 0
+ /*
+ * TX L2 PTP completion:
+ * Completion of TX packet. Length = 32B
+ */
+ #define TX_CMPL_PTP_TYPE_TX_L2_PTP UINT32_C(0x2)
+ #define TX_CMPL_PTP_TYPE_LAST TX_CMPL_PTP_TYPE_TX_L2_PTP
+ #define TX_CMPL_PTP_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_CMPL_PTP_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define TX_CMPL_PTP_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet completed
+ * was transmitted using the push acceleration data provided
+ * by the driver. When this bit is '0', it indicates that the
+ * packet had not push acceleration data written or was executed
+ * as a normal packet even though push data was provided.
+ */
+ #define TX_CMPL_PTP_FLAGS_PUSH UINT32_C(0x80)
+ /* unused1 is 16 b */
+ uint16_t unused_0;
+ /*
+ * This is a copy of the opaque field from the first TX BD of this
+ * transmitted packet. Note that, if the packet was described by a short
+ * CSO or short CSO inline BD, then the 16-bit opaque field from the
+ * short CSO BD will appear in the bottom 16 bits of this field.
+ */
+ uint32_t opaque;
+ uint16_t errors_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define TX_CMPL_PTP_V UINT32_C(0x1)
+ #define TX_CMPL_PTP_ERRORS_MASK UINT32_C(0xfffe)
+ #define TX_CMPL_PTP_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem
+ * with the BDs for the packet.
+ */
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_SFT 1
+ /* No error */
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_BAD_FMT \
+ (UINT32_C(0x2) << 1)
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_LAST \
+ TX_CMPL_PTP_ERRORS_BUFFER_ERROR_BAD_FMT
+ /*
+ * When this bit is '1', it indicates that the length of
+ * the packet was zero. No packet was transmitted.
+ */
+ #define TX_CMPL_PTP_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
+ /*
+ * When this bit is '1', it indicates that the packet
+ * was longer than the programmed limit in TDI. No
+ * packet was transmitted.
+ */
+ #define TX_CMPL_PTP_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
+ /*
+ * When this bit is '1', it indicates that one or more of the
+ * BDs associated with this packet generated a PCI error.
+ * This probably means the address was not valid.
+ */
+ #define TX_CMPL_PTP_ERRORS_DMA_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet was longer
+ * than indicated by the hint. No packet was transmitted.
+ */
+ #define TX_CMPL_PTP_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that the packet was
+ * dropped due to Poison TLP error on one or more of the
+ * TLPs in the PXP completion.
+ */
+ #define TX_CMPL_PTP_ERRORS_POISON_TLP_ERROR UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that the packet was dropped due
+ * to a transient internal error in TDC. The packet or LSO can be
+ * retried and may transmit successfully on a subsequent attempt.
+ */
+ #define TX_CMPL_PTP_ERRORS_INTERNAL_ERROR UINT32_C(0x200)
+ /*
+ * When this bit is '1', it was not possible to collect a a timestamp
+ * for a PTP completion, in which case the timestamp_hi and
+ * timestamp_lo fields are invalid. When this bit is '0' for a PTP
+ * completion, the timestamp_hi and timestamp_lo fields are valid.
+ * RJRN will copy the value of this bit into the field of the same
+ * name in all TX completions, regardless of whether such
+ * completions are PTP completions or other TX completions.
+ */
+ #define TX_CMPL_PTP_ERRORS_TIMESTAMP_INVALID_ERROR UINT32_C(0x400)
+ /* unused2 is 16 b */
+ uint16_t unused_1;
+ /*
+ * This is timestamp value (lower 32bits) read from PM for the PTP
+ * timestamp enabled packet.
+ */
+ uint32_t timestamp_lo;
+} __rte_packed;
+
+/* tx_cmpl_ptp_hi (size:128b/16B) */
+struct tx_cmpl_ptp_hi {
+ /*
+ * This is timestamp value (lower 32bits) read from PM for the PTP
+ * timestamp enabled packet.
+ */
+ uint16_t timestamp_hi[3];
+ uint16_t reserved16;
+ uint64_t v2;
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue.The even passes will write 1.
+ * The odd passes will write 0
+ */
+ #define TX_CMPL_PTP_HI_V2 UINT32_C(0x1)
+} __rte_packed;
/* rx_pkt_cmpl (size:128b/16B) */
struct rx_pkt_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_PKT_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
#define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40)
RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
/*
* This is the length of the data for the packet stored in the
- * buffer(s) identified by the opaque value. This includes
- * the packet BD and any associated buffer BDs. This does not include
- * the the length of any data places in aggregation BDs.
+ * buffer(s) identified by the opaque value. This includes
+ * the packet BD and any associated buffer BDs. This does not include
+ * the length of any data places in aggregation BDs.
*/
uint16_t len;
/*
uint8_t agg_bufs_v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_PKT_CMPL_V1 UINT32_C(0x1)
/*
#define RX_PKT_CMPL_UNUSED1_MASK UINT32_C(0xc0)
#define RX_PKT_CMPL_UNUSED1_SFT 6
/*
- * This is the RSS hash type for the packet. The value is packed
+ * This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
*
* The value of tuple_extrac_op provides the information about
uint8_t rss_hash_type;
/*
* This value indicates the offset in bytes from the beginning of the packet
- * where the inner payload starts. This value is valid for TCP, UDP,
+ * where the inner payload starts. This value is valid for TCP, UDP,
* FCoE, and RoCE packets.
*
* A value of zero indicates that header is 256B into the packet.
* based on the mode bits and key value in the VNIC.
*/
uint32_t rss_hash;
-} __attribute__((packed));
+} __rte_packed;
/* Last 16 bytes of rx_pkt_cmpl. */
/* rx_pkt_cmpl_hi (size:128b/16B) */
/* This value indicates what format the metadata field is. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4
- /* No metadata informtaion. Value is zero. */
+ /* No metadata information. Value is zero. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE \
(UINT32_C(0x0) << 4)
/*
* - VXLAN = VNI[23:0] -> VXLAN Network ID
* - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier.
* - NVGRE = TNI[23:0] -> Tenant Network ID
- * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0
+ * - GRE = KEY[31:0] -> key field with bit mask. zero if K = 0
* - IPV4 = 0 (not populated)
* - IPV6 = Flow Label[19:0]
* - PPPoE = sessionID[15:0]
RX_PKT_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
/*
* This field indicates the IP type for the inner-most IP header.
- * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
* This value is only valid if itype indicates a packet
* with an IP header.
*/
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_PKT_CMPL_V2 \
UINT32_C(0x1)
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
+ * packet was already placed. The packet should be treated as
* invalid.
*/
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK \
* Did Not Fit:
* Packet did not fit into packet buffer provided.
* For regular placement, this means the packet did not fit
- * in the buffer provided. For HDS and jumbo placement, this
+ * in the buffer provided. For HDS and jumbo placement, this
* means that the packet could not be placed into 7 physical
* buffers or less.
*/
UINT32_C(0x80)
/*
* This indicates that there was a CRC error on either an FCoE
- * or RoCE packet. The itype indicates the packet type.
+ * or RoCE packet. The itype indicates the packet type.
*/
#define RX_PKT_CMPL_ERRORS_CRC_ERROR \
UINT32_C(0x100)
* This value holds the reordering sequence number for the packet.
* If the reordering sequence is not valid, then this value is zero.
* The reordering domain for the packet is in the bottom 8 to 10b of
- * the rss_hash value. The bottom 20b of this value contain the
+ * the rss_hash value. The bottom 20b of this value contain the
* ordering domain value for the packet.
*/
#define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff)
#define RX_PKT_CMPL_REORDER_SFT 0
-} __attribute__((packed));
+} __rte_packed;
-/*
- * This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
- */
-/* rx_tpa_start_cmpl (size:128b/16B) */
-struct rx_tpa_start_cmpl {
+/* rx_pkt_v2_cmpl (size:128b/16B) */
+struct rx_pkt_v2_cmpl {
uint16_t flags_type;
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
- #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define RX_TPA_START_CMPL_TYPE_SFT 0
+ #define RX_PKT_V2_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_PKT_V2_CMPL_TYPE_SFT 0
/*
- * RX L2 TPA Start Completion:
- * Completion at the beginning of a TPA operation.
- * Length = 32B
+ * RX L2 V2 completion:
+ * Completion of and L2 RX packet. Length = 32B
+ * This is the new version of the RX_L2 completion used in SR2
+ * and later chips.
*/
- #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13)
- #define RX_TPA_START_CMPL_TYPE_LAST \
- RX_TPA_START_CMPL_TYPE_RX_TPA_START
- #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0)
- #define RX_TPA_START_CMPL_FLAGS_SFT 6
- /* This bit will always be '0' for TPA start completions. */
- #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ #define RX_PKT_V2_CMPL_TYPE_RX_L2_V2 UINT32_C(0xf)
+ #define RX_PKT_V2_CMPL_TYPE_LAST \
+ RX_PKT_V2_CMPL_TYPE_RX_L2_V2
+ #define RX_PKT_V2_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_PKT_V2_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ERROR UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
- #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
- #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Normal:
+ * Packet was placed using normal algorithm.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_NORMAL \
+ (UINT32_C(0x0) << 7)
/*
* Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
- * that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
- * will be filled before moving to the next aggregation
- * buffer.
+ * Packet was placed using jumbo algorithm.
*/
- #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO \
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_JUMBO \
(UINT32_C(0x1) << 7)
/*
* Header/Data Separation:
* Packet was placed using Header/Data separation algorithm.
* The separation location is indicated by the itype field.
*/
- #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS \
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_HDS \
(UINT32_C(0x2) << 7)
/*
- * GRO/Jumbo:
- * Packet will be placed using GRO/Jumbo where the first
- * packet is filled with data. Subsequent packets will be
- * placed such that any one packet does not span two
- * aggregation buffers unless it starts at the beginning of
- * an aggregation buffer.
+ * Truncation:
+ * Packet was placed using truncation algorithm. The
+ * placed (truncated) length is indicated in the payload_offset
+ * field. The original length is indicated in the len field.
*/
- #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
- (UINT32_C(0x5) << 7)
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_TRUNCATION \
+ (UINT32_C(0x3) << 7)
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_PKT_V2_CMPL_FLAGS_PLACEMENT_TRUNCATION
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_PKT_V2_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
/*
- * GRO/Header-Data Separation:
- * Packet will be placed using GRO/HDS where the header
- * is in the first packet.
- * Payload of each packet will be
- * placed such that any one packet does not span two
- * aggregation buffers unless it starts at the beginning of
- * an aggregation buffer.
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement.
+ * It starts at the first 32B boundary after the end of the header
+ * for HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
*/
- #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \
- (UINT32_C(0x6) << 7)
- #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \
- RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
- /* This bit is '1' if the RSS field in this completion is valid. */
- #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
- /* unused is 1 b */
- #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800)
+ #define RX_PKT_V2_CMPL_FLAGS_PKT_METADATA_PRESENT UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
*/
- #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
- #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * Not Known:
+ * Indicates that the packet type was not known.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_NOT_KNOWN \
+ (UINT32_C(0x0) << 12)
+ /*
+ * IP Packet:
+ * Indicates that the packet was an IP packet, but further
+ * classification was not possible.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_IP \
+ (UINT32_C(0x1) << 12)
/*
* TCP Packet:
* Indicates that the packet was IP and TCP.
+ * This indicates that the payload_offset field is valid.
*/
- #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP \
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_TCP \
(UINT32_C(0x2) << 12)
- #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \
- RX_TPA_START_CMPL_FLAGS_ITYPE_TCP
/*
- * This value indicates the amount of packet data written to the
- * buffer the opaque field in this completion corresponds to.
+ * UDP Packet:
+ * Indicates that the packet was IP and UDP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_UDP \
+ (UINT32_C(0x3) << 12)
+ /*
+ * FCoE Packet:
+ * Indicates that the packet was recognized as a FCoE.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_FCOE \
+ (UINT32_C(0x4) << 12)
+ /*
+ * RoCE Packet:
+ * Indicates that the packet was recognized as a RoCE.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_ROCE \
+ (UINT32_C(0x5) << 12)
+ /*
+ * ICMP Packet:
+ * Indicates that the packet was recognized as ICMP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_ICMP \
+ (UINT32_C(0x7) << 12)
+ /*
+ * PtP packet wo/timestamp:
+ * Indicates that the packet was recognized as a PtP
+ * packet.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \
+ (UINT32_C(0x8) << 12)
+ /*
+ * PtP packet w/timestamp:
+ * Indicates that the packet was recognized as a PtP
+ * packet and that a timestamp was taken for the packet.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP \
+ (UINT32_C(0x9) << 12)
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_LAST \
+ RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
+ /*
+ * This is the length of the data for the packet stored in the
+ * buffer(s) identified by the opaque value. This includes
+ * the packet BD and any associated buffer BDs. This does not include
+ * the length of any data places in aggregation BDs.
*/
uint16_t len;
/*
* corresponds to.
*/
uint32_t opaque;
+ uint8_t agg_bufs_v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- uint8_t v1;
+ #define RX_PKT_V2_CMPL_V1 UINT32_C(0x1)
/*
- * This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * This value is the number of aggregation buffers that follow this
+ * entry in the completion ring that are a part of this packet.
+ * If the value is zero, then the packet is completely contained
+ * in the buffer space provided for the packet in the RX ring.
*/
- #define RX_TPA_START_CMPL_V1 UINT32_C(0x1)
- #define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1
+ #define RX_PKT_V2_CMPL_AGG_BUFS_MASK UINT32_C(0x3e)
+ #define RX_PKT_V2_CMPL_AGG_BUFS_SFT 1
+ /* unused1 is 2 b */
+ #define RX_PKT_V2_CMPL_UNUSED1_MASK UINT32_C(0xc0)
+ #define RX_PKT_V2_CMPL_UNUSED1_SFT 6
/*
- * This is the RSS hash type for the packet. The value is packed
+ * This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
*
* The value of tuple_extrac_op provides the information about
* corresponding to 4-tuples are only valid for TCP traffic.
*/
uint8_t rss_hash_type;
- /*
- * This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
- * with the TPA end completion.
- */
- uint16_t agg_id;
- /* unused2 is 9 b */
- #define RX_TPA_START_CMPL_UNUSED2_MASK UINT32_C(0x1ff)
- #define RX_TPA_START_CMPL_UNUSED2_SFT 0
- /*
- * This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
- * with the TPA end completion.
- */
- #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00)
- #define RX_TPA_START_CMPL_AGG_ID_SFT 9
+ uint16_t metadata1_payload_offset;
+ /*
+ * This is data from the CFA as indicated by the meta_format field.
+ * If truncation placement is not used, this value indicates the offset
+ * in bytes from the beginning of the packet where the inner payload
+ * starts. This value is valid for TCP, UDP, FCoE, and RoCE packets. If
+ * truncation placement is used, this value represents the placed
+ * (truncated) length of the packet.
+ */
+ #define RX_PKT_V2_CMPL_PAYLOAD_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_PKT_V2_CMPL_PAYLOAD_OFFSET_SFT 0
+ /* This is data from the CFA as indicated by the meta_format field. */
+ #define RX_PKT_V2_CMPL_METADATA1_MASK UINT32_C(0xf000)
+ #define RX_PKT_V2_CMPL_METADATA1_SFT 12
+ /* When meta_format != 0, this value is the VLAN TPID_SEL. */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_MASK UINT32_C(0x7000)
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_SFT 12
+ /* When meta_format != 0, this value is the VLAN TPID_SEL. */
+ #define RX_PKT_V2_CMPL_METADATA1_VALID UINT32_C(0x8000)
/*
* This value is the RSS hash value calculated for the packet
- * based on the mode bits and key value in the VNIC.
+ * based on the mode bits and key value in the VNIC. When vee_cmpl_mode
+ * is set in VNIC context, this is the lower 32b of the host address
+ * from the first BD used to place the packet.
*/
uint32_t rss_hash;
-} __attribute__((packed));
+} __rte_packed;
-/*
- * Last 16 bytes of rx_tpa_start_cmpl.
- *
- * This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
- */
-/* rx_tpa_start_cmpl_hi (size:128b/16B) */
-struct rx_tpa_start_cmpl_hi {
+/* Last 16 bytes of RX Packet V2 Completion Record */
+/* rx_pkt_v2_cmpl_hi (size:128b/16B) */
+struct rx_pkt_v2_cmpl_hi {
uint32_t flags2;
/*
- * This indicates that the ip checksum was calculated for the
- * inner packet and that the sum passed for all segments
- * included in the aggregation.
+ * When this bit is '0', the cs_ok field has the following definition:-
+ * ip_cs_ok[2:0] = The number of header groups with a valid IP checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. -
+ * l4_cs_ok[5:3] = The number of header groups with a valid L4 checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. When this
+ * bit is '1', the cs_ok field has the following definition: -
+ * hdr_cnt[2:0] = The number of header groups that were parsed by the
+ * chip and passed in the delivered packet. - ip_cs_all_ok[3] =This bit
+ * will be '1' if all the parsed header groups with an IP checksum are
+ * valid. - l4_cs_all_ok[4] = This bit will be '1' if all the parsed
+ * header groups with an L4 checksum are valid.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_ALL_OK_MODE \
+ UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_MASK \
+ UINT32_C(0xf0)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_SFT 4
+ /* There is no metadata information. Values are zero. */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information: - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],
+ * de, vid[11:0]} The metadata2 field contains the table scope
+ * and action record pointer. - metadata2[25:0] contains the
+ * action record pointer. - metadata2[31:26] contains the table
+ * scope.
*/
- #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_ACT_REC_PTR \
+ (UINT32_C(0x1) << 4)
/*
- * This indicates that the TCP, UDP or ICMP checksum was
- * calculated for the inner packet and that the sum passed
- * for all segments included in the aggregation.
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the Tunnel ID
+ * value, justified to LSB. i
+ * - VXLAN = VNI[23:0] -> VXLAN Network ID
+ * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier
+ * - NVGRE = TNI[23:0] -> Tenant Network ID
+ * - GRE = KEY[31:0] -> key field with bit mask. zero if K=0
+ * - IPv4 = 0 (not populated)
+ * - IPv6 = Flow Label[19:0]
+ * - PPPoE = sessionID[15:0]
+ * - MPLs = Outer label[19:0]
+ * - UPAR = Selected[31:0] with bit mask
*/
- #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_TUNNEL_ID \
+ (UINT32_C(0x2) << 4)
/*
- * This indicates that the ip checksum was calculated for the
- * tunnel header and that the sum passed for all segments
- * included in the aggregation.
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],de, vid[11:0]}
+ * The metadata2 field contains the 32b metadata from the prepended
+ * header (chdr_data).
*/
- #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_CHDR_DATA \
+ (UINT32_C(0x3) << 4)
/*
- * This indicates that the UDP checksum was
- * calculated for the tunnel packet and that the sum passed for
- * all segments included in the aggregation.
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the outer_l3_offset,
+ * inner_l2_offset, inner_l3_offset, and inner_l4_size.
+ * - metadata2[8:0] contains the outer_l3_offset.
+ * - metadata2[17:9] contains the inner_l2_offset.
+ * - metadata2[26:18] contains the inner_l3_offset.
+ * - metadata2[31:27] contains the inner_l4_size.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_HDR_OFFSET \
+ (UINT32_C(0x4) << 4)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_LAST \
+ RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_HDR_OFFSET
+ /*
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * This value is only valid if itype indicates a packet
+ * with an IP header.
*/
- #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
- /* This value indicates what format the metadata field is. */
- #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
- #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4
- /* No metadata information. Value is zero. */
- #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \
- (UINT32_C(0x0) << 4)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_IP_TYPE \
+ UINT32_C(0x100)
/*
- * The metadata field contains the VLAN tag and TPID value.
- * - metadata[11:0] contains the vlan VID value.
- * - metadata[12] contains the vlan DE value.
- * - metadata[15:13] contains the vlan PRI value.
- * - metadata[31:16] contains the vlan TPID value.
+ * This indicates that the complete 1's complement checksum was
+ * calculated for the packet.
*/
- #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN \
- (UINT32_C(0x1) << 4)
- #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \
- RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_CALC \
+ UINT32_C(0x200)
/*
- * This field indicates the IP type for the inner-most IP header.
- * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * This field indicates the status of IP and L4 CS calculations done
+ * by the chip. The format of this field is indicated by the
+ * cs_all_ok_mode bit.
*/
- #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_OK_MASK \
+ UINT32_C(0xfc00)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_OK_SFT 10
+ /*
+ * This value is the complete 1's complement checksum calculated from
+ * the start of the outer L3 header to the end of the packet (not
+ * including the ethernet crc). It is valid when the
+ * 'complete_checksum_calc' flag is set.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_MASK \
+ UINT32_C(0xffff0000)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_SFT 16
/*
* This is data from the CFA block as indicated by the meta_format
* field.
- */
- uint32_t metadata;
- /* When meta_format=1, this value is the VLAN VID. */
- #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
- #define RX_TPA_START_CMPL_METADATA_VID_SFT 0
- /* When meta_format=1, this value is the VLAN DE. */
- #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000)
- /* When meta_format=1, this value is the VLAN PRI. */
- #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
- #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13
- /* When meta_format=1, this value is the VLAN TPID. */
- #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
- #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16
- uint16_t v2;
+ * - meta_format 0 - none - metadata2 = 0 - not valid/not stripped
+ * - meta_format 1 - act_rec_ptr - metadata2 = {table_scope[5:0],
+ * act_rec_ptr[25:0]}
+ * - meta_format 2 - tunnel_id - metadata2 = tunnel_id[31:0]
+ * - meta_format 3 - chdr_data - metadata2 = updated_chdr_data[31:0]
+ * - meta_format 4 - hdr_offsets - metadata2 = hdr_offsets[31:0]
+ * When vee_cmpl_mode is set in VNIC context, this is the upper 32b
+ * of the host address from the first BD used to place the packet.
+ */
+ uint32_t metadata2;
+ uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define RX_TPA_START_CMPL_V2 UINT32_C(0x1)
+ #define RX_PKT_V2_CMPL_HI_V2 \
+ UINT32_C(0x1)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_SFT 1
/*
- * This field identifies the CFA action rule that was used for this
- * packet.
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
*/
- uint16_t cfa_code;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
/*
- * This is the size in bytes of the inner most L4 header.
- * This can be subtracted from the payload_offset to determine
- * the start of the inner most L4 header.
+ * Did Not Fit: Packet did not fit into packet buffer provided.
+ * For regular placement, this means the packet did not fit in
+ * the buffer provided. For HDS and jumbo placement, this means
+ * that the packet could not be placed into 8 physical buffers
+ * (if fixed-size buffers are used), or that the packet could
+ * not be placed in the number of physical buffers configured
+ * for the VNIC (if variable-size buffers are used)
*/
- uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
/*
- * This is the offset from the beginning of the packet in bytes for
- * the outer L3 header. If there is no outer L3 header, then this
- * value is zero.
+ * Not On Chip: All BDs needed for the packet were not on-chip
+ * when the packet arrived. For regular placement, this error is
+ * not valid. For HDS and jumbo placement, this means that not
+ * enough agg BDs were posted to place the packet.
*/
- #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
- #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
/*
- * This is the offset from the beginning of the packet in bytes for
- * the inner most L2 header.
+ * Bad Format:
+ * BDs were not formatted correctly.
*/
- #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
- #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
/*
- * This is the offset from the beginning of the packet in bytes for
- * the inner most L3 header.
+ * Flush:
+ * There was a bad_format error on the previous operation
*/
- #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
- #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_FLUSH
/*
- * This is the size in bytes of the inner most L4 header.
- * This can be subtracted from the payload_offset to determine
- * the start of the inner most L4 header.
+ * This indicates that there was an error in the outer tunnel
+ * portion of the packet when this field is non-zero.
*/
- #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
- #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27
-} __attribute__((packed));
-
-/*
- * This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
- */
-/* rx_tpa_end_cmpl (size:128b/16B) */
-struct rx_tpa_end_cmpl {
- uint16_t flags_type;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_MASK \
+ UINT32_C(0x70)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_SFT 4
/*
- * This field indicates the exact type of the completion.
- * By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
- * records.
+ * No additional error occurred on the outer tunnel portion
+ * of the packet or the packet does not have a outer tunnel.
*/
- #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define RX_TPA_END_CMPL_TYPE_SFT 0
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 4)
/*
- * RX L2 TPA End Completion:
- * Completion at the end of a TPA operation.
- * Length = 32B
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 in the outer tunnel header.
*/
- #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
- #define RX_TPA_END_CMPL_TYPE_LAST \
- RX_TPA_END_CMPL_TYPE_RX_TPA_END
- #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
- #define RX_TPA_END_CMPL_FLAGS_SFT 6
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 4)
/*
- * When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
- * error_flags.
+ * Indicates that header length is out of range in the outer
+ * tunnel header. Valid for IPv4.
*/
- #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
- /* This field indicates how the packet was placed in the buffer. */
- #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
- #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 4)
/*
- * Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
- * that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
- * will be filled before moving to the next aggregation
- * buffer.
+ * Indicates that physical packet is shorter than that claimed
+ * by the outer tunnel l3 header length. Valid for IPv4, or
+ * IPv6 outer tunnel packets.
*/
- #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO \
- (UINT32_C(0x1) << 7)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_IP_TOTAL_ERROR \
+ (UINT32_C(0x3) << 4)
/*
- * Header/Data Separation:
- * Packet was placed using Header/Data separation algorithm.
- * The separation location is indicated by the itype field.
+ * Indicates that the physical packet is shorter than that
+ * claimed by the outer tunnel UDP header length for a outer
+ * tunnel UDP packet that is not fragmented.
*/
- #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS \
- (UINT32_C(0x2) << 7)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_UDP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 4)
/*
- * GRO/Jumbo:
- * Packet will be placed using GRO/Jumbo where the first
- * packet is filled with data. Subsequent packets will be
- * placed such that any one packet does not span two
- * aggregation buffers unless it starts at the beginning of
- * an aggregation buffer.
+ * Indicates that the IPv4 TTL or IPv6 hop limit check have
+ * failed (e.g. TTL = 0) in the outer tunnel header. Valid for
+ * IPv4, and IPv6.
*/
- #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
- (UINT32_C(0x5) << 7)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_TTL \
+ (UINT32_C(0x5) << 4)
/*
- * GRO/Header-Data Separation:
- * Packet will be placed using GRO/HDS where the header
- * is in the first packet.
- * Payload of each packet will be
- * placed such that any one packet does not span two
- * aggregation buffers unless it starts at the beginning of
- * an aggregation buffer.
+ * Indicates that the IP checksum failed its check in the outer
+ * tunnel header.
*/
- #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
- (UINT32_C(0x6) << 7)
- #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \
- RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
- /* unused is 2 b */
- #define RX_TPA_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
- #define RX_TPA_END_CMPL_FLAGS_UNUSED_SFT 10
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_IP_CS_ERROR \
+ (UINT32_C(0x6) << 4)
/*
- * This value indicates what the inner packet determined for the
- * packet was.
- * - 2 TCP Packet
- * Indicates that the packet was IP and TCP. This indicates
- * that the ip_cs field is valid and that the tcp_udp_cs
- * field is valid and contains the TCP checksum.
- * This also indicates that the payload_offset field is valid.
+ * Indicates that the L4 checksum failed its check in the outer
+ * tunnel header.
*/
- #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
- #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L4_CS_ERROR \
+ (UINT32_C(0x7) << 4)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L4_CS_ERROR
/*
- * This value is zero for TPA End completions.
- * There is no data in the buffer that corresponds to the opaque
- * value in this completion.
+ * This indicates that there was a CRC error on either an FCoE
+ * or RoCE packet. The itype indicates the packet type.
*/
- uint16_t len;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_CRC_ERROR \
+ UINT32_C(0x100)
/*
- * This is a copy of the opaque field from the RX BD this completion
- * corresponds to.
+ * This indicates that there was an error in the tunnel portion
+ * of the packet when this field is non-zero.
*/
- uint32_t opaque;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_MASK \
+ UINT32_C(0xe00)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_SFT 9
/*
- * This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * No additional error occurred on the tunnel portion
+ * of the packet or the packet does not have a tunnel.
*/
- uint8_t agg_bufs_v1;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 9)
/*
- * This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 in the tunnel header.
*/
- #define RX_TPA_END_CMPL_V1 UINT32_C(0x1)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 9)
/*
- * This value is the number of aggregation buffers that follow this
- * entry in the completion ring that are a part of this aggregation
- * packet.
- * If the value is zero, then the packet is completely contained
- * in the buffer space provided in the aggregation start completion.
+ * Indicates that header length is out of range in the tunnel
+ * header. Valid for IPv4.
*/
- #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e)
- #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1
- /* This value is the number of segments in the TPA operation. */
- uint8_t tpa_segs;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 9)
/*
- * This value indicates the offset in bytes from the beginning of the packet
- * where the inner payload starts. This value is valid for TCP, UDP,
- * FCoE, and RoCE packets.
- *
- * A value of zero indicates an offset of 256 bytes.
+ * Indicates that physical packet is shorter than that claimed
+ * by the tunnel l3 header length. Valid for IPv4, or IPv6 tunnel
+ * packet packets.
*/
- uint8_t payload_offset;
- uint8_t agg_id;
- /* unused2 is 1 b */
- #define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
+ (UINT32_C(0x3) << 9)
/*
- * This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
- * with the TPA end completion.
+ * Indicates that the physical packet is shorter than that claimed
+ * by the tunnel UDP header length for a tunnel UDP packet that is
+ * not fragmented.
*/
- #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe)
- #define RX_TPA_END_CMPL_AGG_ID_SFT 1
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 9)
/*
- * For non-GRO packets, this value is the
- * timestamp delta between earliest and latest timestamp values for
- * TPA packet. If packets were not time stamped, then delta will be
- * zero.
- *
- * For GRO packets, this field is zero except for the following
- * sub-fields.
- * - tsdelta[31]
- * Timestamp present indication. When '0', no Timestamp
- * option is in the packet. When '1', then a Timestamp
- * option is present in the packet.
+ * Indicates that the IPv4 TTL or IPv6 hop limit check have failed
+ * (e.g. TTL = 0) in the tunnel header. Valid for IPv4, and IPv6.
*/
- uint32_t tsdelta;
-} __attribute__((packed));
-
-/*
- * Last 16 bytes of rx_tpa_end_cmpl.
- *
- * This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
- */
-/* rx_tpa_end_cmpl_hi (size:128b/16B) */
-struct rx_tpa_end_cmpl_hi {
- uint32_t tpa_dup_acks;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
+ (UINT32_C(0x5) << 9)
/*
- * This value is the number of duplicate ACKs that have been
- * received as part of the TPA operation.
+ * Indicates that the IP checksum failed its check in the tunnel
+ * header.
*/
- #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
- #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_IP_CS_ERROR \
+ (UINT32_C(0x6) << 9)
/*
- * This value is the valid when TPA completion is active. It
- * indicates the length of the longest segment of the TPA operation
- * for LRO mode and the length of the first segment in GRO mode.
- *
- * This value may be used by GRO software to re-construct the original
- * packet stream from the TPA packet. This is the length of all
- * but the last segment for GRO. In LRO mode this value may be used
- * to indicate MSS size to the stack.
+ * Indicates that the L4 checksum failed its check in the tunnel
+ * header.
*/
- uint16_t tpa_seg_len;
- /* unused4 is 16 b */
- uint16_t unused3;
- uint16_t errors_v2;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L4_CS_ERROR \
+ (UINT32_C(0x7) << 9)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L4_CS_ERROR
/*
- * This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * This indicates that there was an error in the inner
+ * portion of the packet when this
+ * field is non-zero.
*/
- #define RX_TPA_END_CMPL_V2 UINT32_C(0x1)
- #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe)
- #define RX_TPA_END_CMPL_ERRORS_SFT 1
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_MASK \
+ UINT32_C(0xf000)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_SFT 12
/*
- * This error indicates that there was some sort of problem with
- * the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
- * invalid.
+ * No additional error occurred on the tunnel portion
+ * or the packet of the packet does not have a tunnel.
*/
- #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
- #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 12)
/*
- * This error occurs when there is a fatal HW problem in
- * the chip only. It indicates that there were not
- * BDs on chip but that there was adequate reservation.
- * provided by the TPA block.
+ * Indicates that IP header version does not match
+ * expectation from L2 Ethertype for IPv4 and IPv6 or that
+ * option other than VFT was parsed on
+ * FCoE packet.
*/
- #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
- (UINT32_C(0x2) << 1)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 12)
/*
- * This error occurs when TPA block was not configured to
- * reserve adequate BDs for TPA operations on this RX
- * ring. All data for the TPA operation was not placed.
- *
- * This error can also be generated when the number of
- * segments is not programmed correctly in TPA and the
- * 33 total aggregation buffers allowed for the TPA
- * operation has been exceeded.
+ * indicates that header length is out of range. Valid for
+ * IPv4 and RoCE
*/
- #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
- (UINT32_C(0x4) << 1)
- #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
- RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR
- /* unused5 is 16 b */
- uint16_t unused_4;
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 12)
/*
- * This is the opaque value that was completed for the TPA start
- * completion that corresponds to this TPA end completion.
+ * indicates that the IPv4 TTL or IPv6 hop limit check
+ * have failed (e.g. TTL = 0). Valid for IPv4, and IPv6
*/
- uint32_t start_opaque;
-} __attribute__((packed));
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_TTL \
+ (UINT32_C(0x3) << 12)
+ /*
+ * Indicates that physical packet is shorter than that
+ * claimed by the l3 header length. Valid for IPv4,
+ * IPv6 packet or RoCE packets.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 12)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the UDP header length for a UDP packet that is
+ * not fragmented.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 12)
+ /*
+ * Indicates that TCP header length > IP payload. Valid for
+ * TCP packets only.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
+ (UINT32_C(0x6) << 12)
+ /* Indicates that TCP header length < 5. Valid for TCP. */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
+ (UINT32_C(0x7) << 12)
+ /*
+ * Indicates that TCP option headers result in a TCP header
+ * size that does not match data offset in TCP header. Valid
+ * for TCP.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
+ (UINT32_C(0x8) << 12)
+ /*
+ * Indicates that the IP checksum failed its check in the
+ * inner header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_IP_CS_ERROR \
+ (UINT32_C(0x9) << 12)
+ /*
+ * Indicates that the L4 checksum failed its check in the
+ * inner header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_CS_ERROR \
+ (UINT32_C(0xa) << 12)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_CS_ERROR
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ uint16_t metadata0;
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_PKT_V2_CMPL_HI_METADATA0_VID_MASK UINT32_C(0xfff)
+ #define RX_PKT_V2_CMPL_HI_METADATA0_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_PKT_V2_CMPL_HI_METADATA0_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_PKT_V2_CMPL_HI_METADATA0_PRI_MASK UINT32_C(0xe000)
+ #define RX_PKT_V2_CMPL_HI_METADATA0_PRI_SFT 13
+ /*
+ * The timestamp field contains the 32b timestamp for the packet from
+ * the MAC.
+ */
+ uint32_t timestamp;
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
*/
-/* rx_tpa_v2_start_cmpl (size:128b/16B) */
-struct rx_tpa_v2_start_cmpl {
+/* rx_tpa_start_cmpl (size:128b/16B) */
+struct rx_tpa_start_cmpl {
uint16_t flags_type;
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
- #define RX_TPA_V2_START_CMPL_TYPE_MASK \
- UINT32_C(0x3f)
- #define RX_TPA_V2_START_CMPL_TYPE_SFT 0
+ #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_START_CMPL_TYPE_SFT 0
/*
* RX L2 TPA Start Completion:
* Completion at the beginning of a TPA operation.
* Length = 32B
*/
- #define RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START \
- UINT32_C(0x13)
- #define RX_TPA_V2_START_CMPL_TYPE_LAST \
- RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START
- #define RX_TPA_V2_START_CMPL_FLAGS_MASK \
- UINT32_C(0xffc0)
- #define RX_TPA_V2_START_CMPL_FLAGS_SFT 6
+ #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13)
+ #define RX_TPA_START_CMPL_TYPE_LAST \
+ RX_TPA_START_CMPL_TYPE_RX_TPA_START
+ #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_START_CMPL_FLAGS_SFT 6
/* This bit will always be '0' for TPA start completions. */
- #define RX_TPA_V2_START_CMPL_FLAGS_ERROR \
- UINT32_C(0x40)
+ #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
- #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_MASK \
- UINT32_C(0x380)
- #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_SFT 7
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
+ * TPA Packet was placed using jumbo algorithm. This means
* that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
+ * moving to aggregation buffers. Each aggregation buffer
* will be filled before moving to the next aggregation
* buffer.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_JUMBO \
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO \
(UINT32_C(0x1) << 7)
/*
* Header/Data Separation:
* Packet was placed using Header/Data separation algorithm.
* The separation location is indicated by the itype field.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_HDS \
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS \
(UINT32_C(0x2) << 7)
/*
* GRO/Jumbo:
* aggregation buffers unless it starts at the beginning of
* an aggregation buffer.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
(UINT32_C(0x5) << 7)
/*
* GRO/Header-Data Separation:
* aggregation buffers unless it starts at the beginning of
* an aggregation buffer.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \
(UINT32_C(0x6) << 7)
- #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_LAST \
- RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
/* This bit is '1' if the RSS field in this completion is valid. */
- #define RX_TPA_V2_START_CMPL_FLAGS_RSS_VALID \
- UINT32_C(0x400)
- /*
- * For devices that support timestamps, when this bit is cleared the
- * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset`
- * field contains the 32b timestamp for
- * the packet from the MAC. When this bit is set, the
- * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset`
- * field contains the outer_l3_offset, inner_l2_offset,
- * inner_l3_offset, and inner_l4_size.
- */
- #define RX_TPA_V2_START_CMPL_FLAGS_TIMESTAMP_FLD_FORMAT \
- UINT32_C(0x800)
+ #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
+ /* unused is 1 b */
+ #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_MASK \
- UINT32_C(0xf000)
- #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12
/*
* TCP Packet:
* Indicates that the packet was IP and TCP.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP \
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP \
(UINT32_C(0x2) << 12)
- #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_LAST \
- RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \
+ RX_TPA_START_CMPL_FLAGS_ITYPE_TCP
/*
* This value indicates the amount of packet data written to the
* buffer the opaque field in this completion corresponds to.
uint32_t opaque;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
uint8_t v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define RX_TPA_V2_START_CMPL_V1 UINT32_C(0x1)
- #define RX_TPA_V2_START_CMPL_LAST RX_TPA_V2_START_CMPL_V1
+ #define RX_TPA_START_CMPL_V1 UINT32_C(0x1)
+ #define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1
/*
- * This is the RSS hash type for the packet. The value is packed
+ * This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
*
* The value of tuple_extrac_op provides the information about
uint8_t rss_hash_type;
/*
* This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
+ * with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
uint16_t agg_id;
+ /* unused2 is 9 b */
+ #define RX_TPA_START_CMPL_UNUSED2_MASK UINT32_C(0x1ff)
+ #define RX_TPA_START_CMPL_UNUSED2_SFT 0
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00)
+ #define RX_TPA_START_CMPL_AGG_ID_SFT 9
/*
* This value is the RSS hash value calculated for the packet
* based on the mode bits and key value in the VNIC.
*/
uint32_t rss_hash;
-} __attribute__((packed));
+} __rte_packed;
/*
- * Last 16 bytes of rx_tpa_v2_start_cmpl.
+ * Last 16 bytes of rx_tpa_start_cmpl.
*
* This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
*/
-/* rx_tpa_v2_start_cmpl_hi (size:128b/16B) */
-struct rx_tpa_v2_start_cmpl_hi {
+/* rx_tpa_start_cmpl_hi (size:128b/16B) */
+struct rx_tpa_start_cmpl_hi {
uint32_t flags2;
/*
* This indicates that the ip checksum was calculated for the
* inner packet and that the sum passed for all segments
* included in the aggregation.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_IP_CS_CALC \
- UINT32_C(0x1)
+ #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
/*
* This indicates that the TCP, UDP or ICMP checksum was
* calculated for the inner packet and that the sum passed
* for all segments included in the aggregation.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_L4_CS_CALC \
- UINT32_C(0x2)
+ #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
/*
* This indicates that the ip checksum was calculated for the
* tunnel header and that the sum passed for all segments
* included in the aggregation.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_T_IP_CS_CALC \
- UINT32_C(0x4)
+ #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
/*
* This indicates that the UDP checksum was
* calculated for the tunnel packet and that the sum passed for
* all segments included in the aggregation.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_T_L4_CS_CALC \
- UINT32_C(0x8)
+ #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
/* This value indicates what format the metadata field is. */
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_MASK \
- UINT32_C(0xf0)
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_SFT 4
- /* No metadata informtaion. Value is zero. */
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_NONE \
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata information. Value is zero. */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \
(UINT32_C(0x0) << 4)
/*
* The metadata field contains the VLAN tag and TPID value.
* - metadata[15:13] contains the vlan PRI value.
* - metadata[31:16] contains the vlan TPID value.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_VLAN \
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN \
(UINT32_C(0x1) << 4)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
/*
- * If ext_meta_format is equal to 1, the metadata field
- * contains the lower 16b of the tunnel ID value, justified
- * to LSB
- * - VXLAN = VNI[23:0] -> VXLAN Network ID
- * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier.
- * - NVGRE = TNI[23:0] -> Tenant Network ID
- * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0
- * - IPV4 = 0 (not populated)
- * - IPV6 = Flow Label[19:0]
- * - PPPoE = sessionID[15:0]
- * - MPLs = Outer label[19:0]
- * - UPAR = Selected[31:0] with bit mask
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \
- (UINT32_C(0x2) << 4)
+ #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
/*
- * if ext_meta_format is equal to 1, metadata field contains
- * 16b metadata from the prepended header (chdr_data).
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \
- (UINT32_C(0x3) << 4)
- /*
- * If ext_meta_format is equal to 1, the metadata field contains
- * the outer_l3_offset, inner_l2_offset, inner_l3_offset and
- * inner_l4_size.
- * - metadata[8:0] contains the outer_l3_offset.
- * - metadata[17:9] contains the inner_l2_offset.
- * - metadata[26:18] contains the inner_l3_offset.
- * - metadata[31:27] contains the inner_l4_size.
+ uint32_t metadata;
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_CMPL_METADATA_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13
+ /* When meta_format=1, this value is the VLAN TPID. */
+ #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16
+ uint16_t v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \
+ #define RX_TPA_START_CMPL_V2 UINT32_C(0x1)
+ /*
+ * This field identifies the CFA action rule that was used for this
+ * packet.
+ */
+ uint16_t cfa_code;
+ /*
+ * This is the size in bytes of the inner most L4 header.
+ * This can be subtracted from the payload_offset to determine
+ * the start of the inner most L4 header.
+ */
+ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the outer L3 header. If there is no outer L3 header, then this
+ * value is zero.
+ */
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L2 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L3 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18
+ /*
+ * This is the size in bytes of the inner most L4 header.
+ * This can be subtracted from the payload_offset to determine
+ * the start of the inner most L4 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ * RX L2 TPA Start V2 Completion Record (32 bytes split to 2 16-byte
+ * struct)
+ */
+/* rx_tpa_start_v2_cmpl (size:128b/16B) */
+struct rx_tpa_start_v2_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_START_V2_CMPL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define RX_TPA_START_V2_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA Start V2 Completion:
+ * Completion at the beginning of a TPA operation.
+ * Length = 32B
+ * This is the new version of the RX_TPA_START completion used
+ * in SR2 and later chips.
+ */
+ #define RX_TPA_START_V2_CMPL_TYPE_RX_TPA_START_V2 \
+ UINT32_C(0xd)
+ #define RX_TPA_START_V2_CMPL_TYPE_LAST \
+ RX_TPA_START_V2_CMPL_TYPE_RX_TPA_START_V2
+ #define RX_TPA_START_V2_CMPL_FLAGS_MASK \
+ UINT32_C(0xffc0)
+ #define RX_TPA_START_V2_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an error
+ * of some type. Type of error is indicated in error_flags.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_ERROR \
+ UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_MASK \
+ UINT32_C(0x380)
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
+ /*
+ * IOC/Jumbo:
+ * Packet will be placed using In-Order Completion/Jumbo where
+ * the first packet of the aggregation is placed using Jumbo
+ * Placement. Subsequent packets will be placed such that each
+ * packet starts at the beginning of an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_JUMBO \
+ (UINT32_C(0x4) << 7)
+ /*
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ /*
+ * IOC/Header-Data Separation:
+ * Packet will be placed using In-Order Completion/HDS where
+ * the header is in the first packet buffer. Payload of each
+ * packet will be placed such that each packet starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_HDS \
+ (UINT32_C(0x7) << 7)
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_TPA_START_V2_CMPL_FLAGS_RSS_VALID \
+ UINT32_C(0x400)
+ /*
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement. It
+ * starts at the first 32B boundary after the end of the header for
+ * HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PKT_METADATA_PRESENT \
+ UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * TCP Packet:
+ * Indicates that the packet was IP and TCP.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_TCP \
+ (UINT32_C(0x2) << 12)
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_LAST \
+ RX_TPA_START_V2_CMPL_FLAGS_ITYPE_TCP
+ /*
+ * This value indicates the amount of packet data written to the
+ * buffer the opaque field in this completion corresponds to.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to. If the VNIC is configured to not use an Rx BD for
+ * the TPA Start completion, then this is a copy of the opaque field
+ * from the first BD used to place the TPA Start packet.
+ */
+ uint32_t opaque;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ uint8_t v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_START_V2_CMPL_V1 UINT32_C(0x1)
+ #define RX_TPA_START_V2_CMPL_LAST RX_TPA_START_V2_CMPL_V1
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ *
+ * The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on.
+ * * 0: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of inner
+ * IP and TCP or UDP headers. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 1: The RSS hash was computed over source IP address and destination
+ * IP address of inner IP header. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 2: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of
+ * IP and TCP or UDP headers of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ * * 3: The RSS hash was computed over source IP address and
+ * destination IP address of IP header of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ *
+ * Note that 4-tuples values listed above are applicable
+ * for layer 4 protocols supported and enabled for RSS in the hardware,
+ * HWRM firmware, and drivers. For example, if RSS hash is supported and
+ * enabled for TCP traffic only, then the values of tuple_extract_op
+ * corresponding to 4-tuples are only valid for TCP traffic.
+ */
+ uint8_t rss_hash_type;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ uint16_t agg_id;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ #define RX_TPA_START_V2_CMPL_AGG_ID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_V2_CMPL_AGG_ID_SFT 0
+ #define RX_TPA_START_V2_CMPL_METADATA1_MASK UINT32_C(0xf000)
+ #define RX_TPA_START_V2_CMPL_METADATA1_SFT 12
+ /* When meta_format != 0, this value is the VLAN TPID_SEL. */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_MASK UINT32_C(0x7000)
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_SFT 12
+ /* When meta_format != 0, this value is the VLAN valid. */
+ #define RX_TPA_START_V2_CMPL_METADATA1_VALID UINT32_C(0x8000)
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC.
+ * When vee_cmpl_mode is set in VNIC context, this is the lower
+ * 32b of the host address from the first BD used to place the packet.
+ */
+ uint32_t rss_hash;
+} __rte_packed;
+
+/*
+ * Last 16 bytes of RX L2 TPA Start V2 Completion Record
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ */
+/* rx_tpa_start_v2_cmpl_hi (size:128b/16B) */
+struct rx_tpa_start_v2_cmpl_hi {
+ uint32_t flags2;
+ /* This indicates that the aggregation was done using GRO rules. */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_AGG_GRO \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '0', the cs_ok field has the following definition:-
+ * ip_cs_ok[2:0] = The number of header groups with a valid IP checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. -
+ * l4_cs_ok[5:3] = The number of header groups with a valid L4 checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. When this
+ * bit is '1', the cs_ok field has the following definition: -
+ * hdr_cnt[2:0] = The number of header groups that were parsed by the
+ * chip and passed in the delivered packet. - ip_cs_all_ok[3] =This bit
+ * will be '1' if all the parsed header groups with an IP checksum are
+ * valid. - l4_cs_all_ok[4] = This bit will be '1' if all the parsed
+ * header groups with an L4 checksum are valid.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_CS_ALL_OK_MODE \
+ UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_MASK \
+ UINT32_C(0xf0)
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* There is no metadata information. Values are zero. */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information: - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],
+ * de, vid[11:0]} The metadata2 field contains the table scope
+ * and action record pointer. - metadata2[25:0] contains the
+ * action record pointer. - metadata2[31:26] contains the table
+ * scope.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_ACT_REC_PTR \
+ (UINT32_C(0x1) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the Tunnel ID
+ * value, justified to LSB. i
+ * - VXLAN = VNI[23:0] -> VXLAN Network ID
+ * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier
+ * - NVGRE = TNI[23:0] -> Tenant Network ID
+ * - GRE = KEY[31:0] -> key field with bit mask. zero if K=0
+ * - IPv4 = 0 (not populated)
+ * - IPv6 = Flow Label[19:0]
+ * - PPPoE = sessionID[15:0]
+ * - MPLs = Outer label[19:0]
+ * - UPAR = Selected[31:0] with bit mask
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \
+ (UINT32_C(0x2) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],de, vid[11:0]}
+ * The metadata2 field contains the 32b metadata from the prepended
+ * header (chdr_data).
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \
+ (UINT32_C(0x3) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the outer_l3_offset,
+ * inner_l2_offset, inner_l3_offset, and inner_l4_size.
+ * - metadata2[8:0] contains the outer_l3_offset.
+ * - metadata2[17:9] contains the inner_l2_offset.
+ * - metadata2[26:18] contains the inner_l3_offset.
+ * - metadata2[31:27] contains the inner_l4_size.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \
(UINT32_C(0x4) << 4)
- #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_LAST \
- RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
/*
* This field indicates the IP type for the inner-most IP header.
- * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * This value is only valid if itype indicates a packet
+ * with an IP header.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_IP_TYPE \
+ #define RX_TPA_START_V2_CMPL_FLAGS2_IP_TYPE \
UINT32_C(0x100)
/*
* This indicates that the complete 1's complement checksum was
- * calculated for the packet.
+ * calculated for the packet in the affregation.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \
+ #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \
UINT32_C(0x200)
/*
- * The combination of this value and meta_format indicated what
- * format the metadata field is.
+ * This field indicates the status of IP and L4 CS calculations done
+ * by the chip. The format of this field is indicated by the
+ * cs_all_ok_mode bit.
+ * CS status for TPA packets is always valid. This means that "all_ok"
+ * status will always be set. The ok count status will be set
+ * appropriately for the packet header, such that all existing CS
+ * values are ok.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_MASK \
- UINT32_C(0xc00)
- #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10
+ #define RX_TPA_START_V2_CMPL_FLAGS2_CS_OK_MASK \
+ UINT32_C(0xfc00)
+ #define RX_TPA_START_V2_CMPL_FLAGS2_CS_OK_SFT 10
/*
* This value is the complete 1's complement checksum calculated from
* the start of the outer L3 header to the end of the packet (not
* the complete checksum is calculated for the first packet in the
* aggregation only.
*/
- #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \
+ #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \
UINT32_C(0xffff0000)
- #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16
+ #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16
/*
* This is data from the CFA block as indicated by the meta_format
* field.
- */
- uint32_t metadata;
- /* When {ext_meta_format,meta_format}=1, this value is the VLAN VID. */
- #define RX_TPA_V2_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
- #define RX_TPA_V2_START_CMPL_METADATA_VID_SFT 0
- /* When {ext_meta_format,meta_format}=1, this value is the VLAN DE. */
- #define RX_TPA_V2_START_CMPL_METADATA_DE UINT32_C(0x1000)
- /* When {ext_meta_format,meta_format}=1, this value is the VLAN PRI. */
- #define RX_TPA_V2_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
- #define RX_TPA_V2_START_CMPL_METADATA_PRI_SFT 13
- /* When {ext_meta_format,meta_format}=1, this value is the VLAN TPID. */
- #define RX_TPA_V2_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
- #define RX_TPA_V2_START_CMPL_METADATA_TPID_SFT 16
+ * - meta_format 0 - none - metadata2 = 0 - not valid/not stripped
+ * - meta_format 1 - act_rec_ptr - metadata2 = {table_scope[5:0],
+ * act_rec_ptr[25:0]}
+ * - meta_format 2 - tunnel_id - metadata2 = tunnel_id[31:0]
+ * - meta_format 3 - chdr_data - metadata2 = updated_chdr_data[31:0]
+ * - meta_format 4 - hdr_offsets - metadata2 = hdr_offsets[31:0]
+ * When vee_cmpl_mode is set in VNIC context, this is the upper 32b
+ * of the host address from the first BD used to place the packet.
+ */
+ uint32_t metadata2;
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define RX_TPA_V2_START_CMPL_V2 \
+ #define RX_TPA_START_V2_CMPL_V2 \
UINT32_C(0x1)
- #define RX_TPA_V2_START_CMPL_ERRORS_MASK \
+ #define RX_TPA_START_V2_CMPL_ERRORS_MASK \
UINT32_C(0xfffe)
- #define RX_TPA_V2_START_CMPL_ERRORS_SFT 1
+ #define RX_TPA_START_V2_CMPL_ERRORS_SFT 1
/*
* This error indicates that there was some sort of problem with
- * the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
+ * the BDs for the packetThe packet should be treated as
* invalid.
*/
- #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_MASK \
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_MASK \
UINT32_C(0xe)
- #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/* No buffer error */
- #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
(UINT32_C(0x0) << 1)
+ /*
+ * Did Not Fit:
+ * Packet did not fit into packet buffer provided. This means
+ * that the TPA Start packet was too big to be placed into the
+ * per-packet maximum number of physical buffers configured for
+ * the VNIC, or that it was too big to be placed into the
+ * per-aggregation maximum number of physical buffers configured
+ * for the VNIC. This error only occurs when the VNIC is
+ * configured for variable size receive buffers.
+ */
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
/*
* Bad Format:
* BDs were not formatted correctly.
*/
- #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
(UINT32_C(0x3) << 1)
/*
* Flush:
* There was a bad_format error on the previous operation
*/
- #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
(UINT32_C(0x5) << 1)
- #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_LAST \
- RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_FLUSH
/*
- * This field identifies the CFA action rule that was used for this
- * packet.
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
*/
- uint16_t cfa_code;
- /*
- * For devices that support timestamps this field is overridden
- * with the timestamp value. When `flags.timestamp_fld_format` is
- * cleared, this field contains the 32b timestamp for the packet from the
- * MAC.
+ uint16_t metadata0;
+ /* When meta_format != 0, this value is the VLAN VID. */
+ #define RX_TPA_START_V2_CMPL_METADATA0_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_V2_CMPL_METADATA0_VID_SFT 0
+ /* When meta_format != 0, this value is the VLAN DE. */
+ #define RX_TPA_START_V2_CMPL_METADATA0_DE UINT32_C(0x1000)
+ /* When meta_format != 0, this value is the VLAN PRI. */
+ #define RX_TPA_START_V2_CMPL_METADATA0_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_START_V2_CMPL_METADATA0_PRI_SFT 13
+ /*
+ * This field contains the outer_l3_offset, inner_l2_offset,
+ * inner_l3_offset, and inner_l4_size.
*
- * When `flags.timestamp_fld_format` is set, this field contains the
- * outer_l3_offset, inner_l2_offset, inner_l3_offset, and inner_l4_size
- * as defined below.
- */
- uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
- /*
- * This is the offset from the beginning of the packet in bytes for
- * the outer L3 header. If there is no outer L3 header, then this
- * value is zero.
- */
- #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
- #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_SFT 0
- /*
- * This is the offset from the beginning of the packet in bytes for
- * the inner most L2 header.
- */
- #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
- #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_SFT 9
- /*
- * This is the offset from the beginning of the packet in bytes for
- * the inner most L3 header.
- */
- #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
- #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_SFT 18
- /*
- * This is the size in bytes of the inner most L4 header.
- * This can be subtracted from the payload_offset to determine
- * the start of the inner most L4 header.
+ * hdr_offsets[8:0] contains the outer_l3_offset.
+ * hdr_offsets[17:9] contains the inner_l2_offset.
+ * hdr_offsets[26:18] contains the inner_l3_offset.
+ * hdr_offsets[31:27] contains the inner_l4_size.
*/
- #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
- #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_SFT 27
-} __attribute__((packed));
+ uint32_t hdr_offsets;
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
*/
-/* rx_tpa_v2_end_cmpl (size:128b/16B) */
-struct rx_tpa_v2_end_cmpl {
+/* rx_tpa_end_cmpl (size:128b/16B) */
+struct rx_tpa_end_cmpl {
uint16_t flags_type;
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
- #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define RX_TPA_V2_END_CMPL_TYPE_SFT 0
+ #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_END_CMPL_TYPE_SFT 0
/*
* RX L2 TPA End Completion:
* Completion at the end of a TPA operation.
* Length = 32B
*/
- #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
- #define RX_TPA_V2_END_CMPL_TYPE_LAST \
- RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END
- #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
- #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
+ #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ #define RX_TPA_END_CMPL_TYPE_LAST \
+ RX_TPA_END_CMPL_TYPE_RX_TPA_END
+ #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_END_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
+ * TPA Packet was placed using jumbo algorithm. This means
* that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
+ * moving to aggregation buffers. Each aggregation buffer
* will be filled before moving to the next aggregation
* buffer.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_JUMBO \
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO \
(UINT32_C(0x1) << 7)
/*
* Header/Data Separation:
* Packet was placed using Header/Data separation algorithm.
* The separation location is indicated by the itype field.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_HDS \
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS \
(UINT32_C(0x2) << 7)
+ /*
+ * IOC/Jumbo:
+ * Packet will be placed using In-Order Completion/Jumbo where
+ * the first packet of the aggregation is placed using Jumbo
+ * Placement. Subsequent packets will be placed such that each
+ * packet starts at the beginning of an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_JUMBO \
+ (UINT32_C(0x4) << 7)
/*
* GRO/Jumbo:
* Packet will be placed using GRO/Jumbo where the first
* aggregation buffers unless it starts at the beginning of
* an aggregation buffer.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
(UINT32_C(0x5) << 7)
/*
* GRO/Header-Data Separation:
* aggregation buffers unless it starts at the beginning of
* an aggregation buffer.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
(UINT32_C(0x6) << 7)
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \
- RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
- /* unused is 2 b */
- #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
- #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10
+ /*
+ * IOC/Header-Data Separation:
+ * Packet will be placed using In-Order Completion/HDS where
+ * the header is in the first packet buffer. Payload of each
+ * packet will be placed such that each packet starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_HDS \
+ (UINT32_C(0x7) << 7)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_HDS
+ /* unused is 1 b */
+ #define RX_TPA_END_CMPL_FLAGS_UNUSED UINT32_C(0x400)
+ /*
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement.
+ * It starts at the first 32B boundary after the end of the header
+ * for HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PKT_METADATA_PRESENT UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
* - 2 TCP Packet
- * Indicates that the packet was IP and TCP. This indicates
+ * Indicates that the packet was IP and TCP. This indicates
* that the ip_cs field is valid and that the tcp_udp_cs
* field is valid and contains the TCP checksum.
* This also indicates that the payload_offset field is valid.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
- #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12
/*
* This value is zero for TPA End completions.
* There is no data in the buffer that corresponds to the opaque
* corresponds to.
*/
uint32_t opaque;
- uint8_t v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define RX_TPA_V2_END_CMPL_V1 UINT32_C(0x1)
+ uint8_t agg_bufs_v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_END_CMPL_V1 UINT32_C(0x1)
+ /*
+ * This value is the number of aggregation buffers that follow this
+ * entry in the completion ring that are a part of this aggregation
+ * packet.
+ * If the value is zero, then the packet is completely contained
+ * in the buffer space provided in the aggregation start completion.
+ */
+ #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e)
+ #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1
/* This value is the number of segments in the TPA operation. */
uint8_t tpa_segs;
+ /*
+ * This value indicates the offset in bytes from the beginning of the packet
+ * where the inner payload starts. This value is valid for TCP, UDP,
+ * FCoE, and RoCE packets.
+ *
+ * A value of zero indicates an offset of 256 bytes.
+ */
+ uint8_t payload_offset;
+ uint8_t agg_id;
+ /* unused2 is 1 b */
+ #define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1)
/*
* This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
+ * with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
- uint16_t agg_id;
+ #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe)
+ #define RX_TPA_END_CMPL_AGG_ID_SFT 1
/*
* For non-GRO packets, this value is the
* timestamp delta between earliest and latest timestamp values for
* For GRO packets, this field is zero except for the following
* sub-fields.
* - tsdelta[31]
- * Timestamp present indication. When '0', no Timestamp
- * option is in the packet. When '1', then a Timestamp
+ * Timestamp present indication. When '0', no Timestamp
+ * option is in the packet. When '1', then a Timestamp
* option is present in the packet.
*/
uint32_t tsdelta;
-} __attribute__((packed));
+} __rte_packed;
/*
- * Last 16 bytes of rx_tpa_v2_end_cmpl.
+ * Last 16 bytes of rx_tpa_end_cmpl.
*
* This TPA completion structure is used on devices where the
- * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
*/
-/* rx_tpa_v2_end_cmpl_hi (size:128b/16B) */
-struct rx_tpa_v2_end_cmpl_hi {
- /*
- * This value is the number of duplicate ACKs that have been
- * received as part of the TPA operation.
- */
- uint16_t tpa_dup_acks;
+/* rx_tpa_end_cmpl_hi (size:128b/16B) */
+struct rx_tpa_end_cmpl_hi {
+ uint32_t tpa_dup_acks;
/*
* This value is the number of duplicate ACKs that have been
* received as part of the TPA operation.
*/
- #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
- #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_SFT 0
- /*
- * This value indicated the offset in bytes from the beginning of
- * the packet where the inner payload starts. This value is valid
- * for TCP, UDP, FCoE and RoCE packets
- */
- uint8_t payload_offset;
- /*
- * The value is the total number of aggregation buffers that were
- * used in the TPA operation. All TPA aggregation buffer completions
- * precede the TPA End completion. If the value is zero, then the
- * aggregation is completely contained in the buffer space provided
- * in the aggregation start completion.
- * Note that the field is simply provided as a cross check.
- */
- uint8_t tpa_agg_bufs;
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0
/*
- * This value is the valid when TPA completion is active. It
+ * This value is the valid when TPA completion is active. It
* indicates the length of the longest segment of the TPA operation
* for LRO mode and the length of the first segment in GRO mode.
*
* This value may be used by GRO software to re-construct the original
- * packet stream from the TPA packet. This is the length of all
- * but the last segment for GRO. In LRO mode this value may be used
+ * packet stream from the TPA packet. This is the length of all
+ * but the last segment for GRO. In LRO mode this value may be used
* to indicate MSS size to the stack.
*/
uint16_t tpa_seg_len;
- uint16_t unused_1;
+ /* unused4 is 16 b */
+ uint16_t unused3;
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define RX_TPA_V2_END_CMPL_V2 UINT32_C(0x1)
- #define RX_TPA_V2_END_CMPL_ERRORS_MASK \
- UINT32_C(0xfffe)
- #define RX_TPA_V2_END_CMPL_ERRORS_SFT 1
+ #define RX_TPA_END_CMPL_V2 UINT32_C(0x1)
+ #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define RX_TPA_END_CMPL_ERRORS_SFT 1
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
+ * packet was already placed. The packet should be treated as
* invalid.
*/
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_MASK \
- UINT32_C(0xe)
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
- /* No buffer error */
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
- (UINT32_C(0x0) << 1)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/*
* This error occurs when there is a fatal HW problem in
- * the chip only. It indicates that there were not
+ * the chip only. It indicates that there were not
* BDs on chip but that there was adequate reservation.
* provided by the TPA block.
*/
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
(UINT32_C(0x2) << 1)
- /*
- * Bad Format:
- * BDs were not formatted correctly.
- */
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
- (UINT32_C(0x3) << 1)
/*
* This error occurs when TPA block was not configured to
* reserve adequate BDs for TPA operations on this RX
- * ring. All data for the TPA operation was not placed.
+ * ring. All data for the TPA operation was not placed.
*
* This error can also be generated when the number of
* segments is not programmed correctly in TPA and the
* 33 total aggregation buffers allowed for the TPA
* operation has been exceeded.
*/
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
(UINT32_C(0x4) << 1)
- /*
- * Flush:
- * There was a bad_format error on the previous operation
- */
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
- (UINT32_C(0x5) << 1)
- #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
- RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH
- uint16_t unused_2;
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR
+ /* unused5 is 16 b */
+ uint16_t unused_4;
/*
* This is the opaque value that was completed for the TPA start
* completion that corresponds to this TPA end completion.
*/
uint32_t start_opaque;
-} __attribute__((packed));
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
* `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
*/
-/* rx_tpa_v2_abuf_cmpl (size:128b/16B) */
-struct rx_tpa_v2_abuf_cmpl {
- uint16_t type;
+/* rx_tpa_v2_start_cmpl (size:128b/16B) */
+struct rx_tpa_v2_start_cmpl {
+ uint16_t flags_type;
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
- #define RX_TPA_V2_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define RX_TPA_V2_ABUF_CMPL_TYPE_SFT 0
+ #define RX_TPA_V2_START_CMPL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define RX_TPA_V2_START_CMPL_TYPE_SFT 0
/*
- * RX TPA Aggregation Buffer completion :
- * Completion of an L2 aggregation buffer in support of
- * TPA packet completion. Length = 16B
+ * RX L2 TPA Start Completion:
+ * Completion at the beginning of a TPA operation.
+ * Length = 32B
*/
- #define RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG UINT32_C(0x16)
- #define RX_TPA_V2_ABUF_CMPL_TYPE_LAST \
- RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG
+ #define RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START \
+ UINT32_C(0x13)
+ #define RX_TPA_V2_START_CMPL_TYPE_LAST \
+ RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START
+ #define RX_TPA_V2_START_CMPL_FLAGS_MASK \
+ UINT32_C(0xffc0)
+ #define RX_TPA_V2_START_CMPL_FLAGS_SFT 6
+ /* This bit will always be '0' for TPA start completions. */
+ #define RX_TPA_V2_START_CMPL_FLAGS_ERROR \
+ UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_MASK \
+ UINT32_C(0x380)
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_SFT 7
/*
- * This is the length of the data for the packet stored in this
- * aggregation buffer identified by the opaque value. This does not
- * include the length of any
- * data placed in other aggregation BDs or in the packet or buffer
- * BDs. This length does not include any space added due to
- * hdr_offset register during HDS placement mode.
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
*/
- uint16_t len;
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
/*
- * This is a copy of the opaque field from the RX BD this aggregation
- * buffer corresponds to.
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
*/
- uint32_t opaque;
- uint16_t v;
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
/*
- * This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
*/
- #define RX_TPA_V2_ABUF_CMPL_V UINT32_C(0x1)
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
/*
- * This is the aggregation ID that the completion is associated with. Use
- * this number to correlate the TPA agg completion with the TPA start
- * completion and the TPA end completion.
- */
- uint16_t agg_id;
- uint32_t unused_1;
-} __attribute__((packed));
-
-/* rx_abuf_cmpl (size:128b/16B) */
-struct rx_abuf_cmpl {
- uint16_t type;
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_TPA_V2_START_CMPL_FLAGS_RSS_VALID \
+ UINT32_C(0x400)
/*
- * This field indicates the exact type of the completion.
- * By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
- * records.
+ * For devices that support timestamps, when this bit is cleared the
+ * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset`
+ * field contains the 32b timestamp for
+ * the packet from the MAC. When this bit is set, the
+ * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset`
+ * field contains the outer_l3_offset, inner_l2_offset,
+ * inner_l3_offset, and inner_l4_size.
*/
- #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define RX_ABUF_CMPL_TYPE_SFT 0
+ #define RX_TPA_V2_START_CMPL_FLAGS_TIMESTAMP_FLD_FORMAT \
+ UINT32_C(0x800)
/*
- * RX Aggregation Buffer completion :
- * Completion of an L2 aggregation buffer in support of
- * TPA, HDS, or Jumbo packet completion. Length = 16B
+ * This value indicates what the inner packet determined for the
+ * packet was.
*/
- #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12)
- #define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_SFT 12
/*
- * This is the length of the data for the packet stored in this
- * aggregation buffer identified by the opaque value. This does not
- * include the length of any
- * data placed in other aggregation BDs or in the packet or buffer
- * BDs. This length does not include any space added due to
- * hdr_offset register during HDS placement mode.
+ * TCP Packet:
+ * Indicates that the packet was IP and TCP.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP \
+ (UINT32_C(0x2) << 12)
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_LAST \
+ RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP
+ /*
+ * This value indicates the amount of packet data written to the
+ * buffer the opaque field in this completion corresponds to.
*/
uint16_t len;
/*
- * This is a copy of the opaque field from the RX BD this aggregation
- * buffer corresponds to.
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
*/
uint32_t opaque;
- uint32_t v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define RX_ABUF_CMPL_V UINT32_C(0x1)
- /* unused3 is 32 b */
- uint32_t unused_2;
-} __attribute__((packed));
+ uint8_t v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_START_CMPL_V1 UINT32_C(0x1)
+ #define RX_TPA_V2_START_CMPL_LAST RX_TPA_V2_START_CMPL_V1
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ *
+ * The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on.
+ * * 0: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of inner
+ * IP and TCP or UDP headers. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 1: The RSS hash was computed over source IP address and destination
+ * IP address of inner IP header. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 2: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of
+ * IP and TCP or UDP headers of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ * * 3: The RSS hash was computed over source IP address and
+ * destination IP address of IP header of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ *
+ * Note that 4-tuples values listed above are applicable
+ * for layer 4 protocols supported and enabled for RSS in the hardware,
+ * HWRM firmware, and drivers. For example, if RSS hash is supported and
+ * enabled for TCP traffic only, then the values of tuple_extract_op
+ * corresponding to 4-tuples are only valid for TCP traffic.
+ */
+ uint8_t rss_hash_type;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ uint16_t agg_id;
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC.
+ */
+ uint32_t rss_hash;
+} __rte_packed;
-/* eject_cmpl (size:128b/16B) */
-struct eject_cmpl {
- uint16_t type;
+/*
+ * Last 16 bytes of rx_tpa_v2_start_cmpl.
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_start_cmpl_hi (size:128b/16B) */
+struct rx_tpa_v2_start_cmpl_hi {
+ uint32_t flags2;
/*
- * This field indicates the exact type of the completion.
- * By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
- * records.
+ * This indicates that the ip checksum was calculated for the
+ * inner packet and that the sum passed for all segments
+ * included in the aggregation.
*/
- #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define EJECT_CMPL_TYPE_SFT 0
+ #define RX_TPA_V2_START_CMPL_FLAGS2_IP_CS_CALC \
+ UINT32_C(0x1)
/*
- * Statistics Ejection Completion:
- * Completion of statistics data ejection buffer.
- * Length = 16B
+ * This indicates that the TCP, UDP or ICMP checksum was
+ * calculated for the inner packet and that the sum passed
+ * for all segments included in the aggregation.
*/
- #define EJECT_CMPL_TYPE_STAT_EJECT UINT32_C(0x1a)
- #define EJECT_CMPL_TYPE_LAST EJECT_CMPL_TYPE_STAT_EJECT
- #define EJECT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
- #define EJECT_CMPL_FLAGS_SFT 6
+ #define RX_TPA_V2_START_CMPL_FLAGS2_L4_CS_CALC \
+ UINT32_C(0x2)
/*
- * When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
- * error_flags.
+ * This indicates that the ip checksum was calculated for the
+ * tunnel header and that the sum passed for all segments
+ * included in the aggregation.
*/
- #define EJECT_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_T_IP_CS_CALC \
+ UINT32_C(0x4)
/*
- * This is the length of the statistics data stored in this
- * buffer.
+ * This indicates that the UDP checksum was
+ * calculated for the tunnel packet and that the sum passed for
+ * all segments included in the aggregation.
*/
- uint16_t len;
+ #define RX_TPA_V2_START_CMPL_FLAGS2_T_L4_CS_CALC \
+ UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_MASK \
+ UINT32_C(0xf0)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata informtaion. Value is zero. */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
/*
- * This is a copy of the opaque field from the RX BD this ejection
- * buffer corresponds to.
+ * The metadata field contains the VLAN tag and TPID value.
+ * - metadata[11:0] contains the vlan VID value.
+ * - metadata[12] contains the vlan DE value.
+ * - metadata[15:13] contains the vlan PRI value.
+ * - metadata[31:16] contains the vlan TPID value.
*/
- uint32_t opaque;
- uint16_t v;
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_VLAN \
+ (UINT32_C(0x1) << 4)
+ /*
+ * If ext_meta_format is equal to 1, the metadata field
+ * contains the lower 16b of the tunnel ID value, justified
+ * to LSB
+ * - VXLAN = VNI[23:0] -> VXLAN Network ID
+ * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier.
+ * - NVGRE = TNI[23:0] -> Tenant Network ID
+ * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0
+ * - IPV4 = 0 (not populated)
+ * - IPV6 = Flow Label[19:0]
+ * - PPPoE = sessionID[15:0]
+ * - MPLs = Outer label[19:0]
+ * - UPAR = Selected[31:0] with bit mask
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \
+ (UINT32_C(0x2) << 4)
+ /*
+ * if ext_meta_format is equal to 1, metadata field contains
+ * 16b metadata from the prepended header (chdr_data).
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \
+ (UINT32_C(0x3) << 4)
+ /*
+ * If ext_meta_format is equal to 1, the metadata field contains
+ * the outer_l3_offset, inner_l2_offset, inner_l3_offset and
+ * inner_l4_size.
+ * - metadata[8:0] contains the outer_l3_offset.
+ * - metadata[17:9] contains the inner_l2_offset.
+ * - metadata[26:18] contains the inner_l3_offset.
+ * - metadata[31:27] contains the inner_l4_size.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \
+ (UINT32_C(0x4) << 4)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
+ /*
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_IP_TYPE \
+ UINT32_C(0x100)
+ /*
+ * This indicates that the complete 1's complement checksum was
+ * calculated for the packet.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \
+ UINT32_C(0x200)
+ /*
+ * The combination of this value and meta_format indicated what
+ * format the metadata field is.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_MASK \
+ UINT32_C(0xc00)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10
+ /*
+ * This value is the complete 1's complement checksum calculated from
+ * the start of the outer L3 header to the end of the packet (not
+ * including the ethernet crc). It is valid when the
+ * 'complete_checksum_calc' flag is set. For TPA Start completions,
+ * the complete checksum is calculated for the first packet in the
+ * aggregation only.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \
+ UINT32_C(0xffff0000)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ uint32_t metadata;
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN VID. */
+ #define RX_TPA_V2_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_V2_START_CMPL_METADATA_VID_SFT 0
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN DE. */
+ #define RX_TPA_V2_START_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN PRI. */
+ #define RX_TPA_V2_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_V2_START_CMPL_METADATA_PRI_SFT 13
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN TPID. */
+ #define RX_TPA_V2_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_TPA_V2_START_CMPL_METADATA_TPID_SFT 16
+ uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define EJECT_CMPL_V UINT32_C(0x1)
- #define EJECT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
- #define EJECT_CMPL_ERRORS_SFT 1
+ #define RX_TPA_V2_START_CMPL_V2 \
+ UINT32_C(0x1)
+ #define RX_TPA_V2_START_CMPL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_TPA_V2_START_CMPL_ERRORS_SFT 1
/*
* This error indicates that there was some sort of problem with
- * the BDs for statistics ejection. The statistics ejection should
- * be treated as invalid
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
*/
- #define EJECT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
- #define EJECT_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/* No buffer error */
- #define EJECT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
(UINT32_C(0x0) << 1)
- /*
- * Did Not Fit:
- * Statistics did not fit into aggregation buffer provided.
- */
- #define EJECT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
- (UINT32_C(0x1) << 1)
/*
* Bad Format:
* BDs were not formatted correctly.
*/
- #define EJECT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
(UINT32_C(0x3) << 1)
/*
* Flush:
* There was a bad_format error on the previous operation
*/
- #define EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
(UINT32_C(0x5) << 1)
- #define EJECT_CMPL_ERRORS_BUFFER_ERROR_LAST \
- EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH
- /* reserved16 is 16 b */
- uint16_t reserved16;
- /* unused3 is 32 b */
- uint32_t unused_2;
-} __attribute__((packed));
-
-/* hwrm_cmpl (size:128b/16B) */
-struct hwrm_cmpl {
- uint16_t type;
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH
/*
- * This field indicates the exact type of the completion.
- * By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
- * records.
+ * This field identifies the CFA action rule that was used for this
+ * packet.
*/
- #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define HWRM_CMPL_TYPE_SFT 0
+ uint16_t cfa_code;
/*
- * HWRM Command Completion:
- * Completion of an HWRM command.
+ * For devices that support timestamps this field is overridden
+ * with the timestamp value. When `flags.timestamp_fld_format` is
+ * cleared, this field contains the 32b timestamp for the packet from the
+ * MAC.
+ *
+ * When `flags.timestamp_fld_format` is set, this field contains the
+ * outer_l3_offset, inner_l2_offset, inner_l3_offset, and inner_l4_size
+ * as defined below.
*/
- #define HWRM_CMPL_TYPE_HWRM_DONE UINT32_C(0x20)
- #define HWRM_CMPL_TYPE_LAST HWRM_CMPL_TYPE_HWRM_DONE
- /* This is the sequence_id of the HWRM command that has completed. */
- uint16_t sequence_id;
- /* unused2 is 32 b */
- uint32_t unused_1;
- uint32_t v;
+ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
/*
- * This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * This is the offset from the beginning of the packet in bytes for
+ * the outer L3 header. If there is no outer L3 header, then this
+ * value is zero.
*/
- #define HWRM_CMPL_V UINT32_C(0x1)
- /* unused4 is 32 b */
- uint32_t unused_3;
-} __attribute__((packed));
+ #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_SFT 0
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L2 header.
+ */
+ #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
+ #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_SFT 9
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L3 header.
+ */
+ #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
+ #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_SFT 18
+ /*
+ * This is the size in bytes of the inner most L4 header.
+ * This can be subtracted from the payload_offset to determine
+ * the start of the inner most L4 header.
+ */
+ #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
+ #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_SFT 27
+} __rte_packed;
-/* hwrm_fwd_req_cmpl (size:128b/16B) */
-struct hwrm_fwd_req_cmpl {
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_end_cmpl (size:128b/16B) */
+struct rx_tpa_v2_end_cmpl {
+ uint16_t flags_type;
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
- uint16_t req_len_type;
+ #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_V2_END_CMPL_TYPE_SFT 0
/*
- * This field indicates the exact type of the completion.
- * By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
- * records.
+ * RX L2 TPA End Completion:
+ * Completion at the end of a TPA operation.
+ * Length = 32B
*/
- #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define HWRM_FWD_REQ_CMPL_TYPE_SFT 0
- /* Forwarded HWRM Request */
- #define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ UINT32_C(0x22)
- #define HWRM_FWD_REQ_CMPL_TYPE_LAST \
- HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ
- /* Length of forwarded request in bytes. */
- #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0)
- #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6
+ #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ #define RX_TPA_V2_END_CMPL_TYPE_LAST \
+ RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END
+ #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
/*
- * Source ID of this request.
- * Typically used in forwarding requests and responses.
- * 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors
- * 0xFFFF - HWRM
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
*/
- uint16_t source_id;
- /* unused1 is 32 b */
- uint32_t unused0;
- /* Address of forwarded request. */
- uint32_t req_buf_addr_v[2];
+ #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
/*
- * This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
*/
- #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1)
- /* Address of forwarded request. */
- #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe)
- #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
-} __attribute__((packed));
-
-/* hwrm_fwd_resp_cmpl (size:128b/16B) */
-struct hwrm_fwd_resp_cmpl {
- uint16_t type;
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
/*
- * This field indicates the exact type of the completion.
- * By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
- * records.
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
*/
- #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define HWRM_FWD_RESP_CMPL_TYPE_SFT 0
- /* Forwarded HWRM Response */
- #define HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP UINT32_C(0x24)
- #define HWRM_FWD_RESP_CMPL_TYPE_LAST \
- HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
/*
- * Source ID of this response.
- * Typically used in forwarding requests and responses.
- * 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors
- * 0xFFFF - HWRM
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
*/
- uint16_t source_id;
- /* Length of forwarded response in bytes. */
- uint16_t resp_len;
- /* unused2 is 16 b */
- uint16_t unused_1;
- /* Address of forwarded request. */
- uint32_t resp_buf_addr_v[2];
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* unused is 2 b */
+ #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
+ #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ * - 2 TCP Packet
+ * Indicates that the packet was IP and TCP. This indicates
+ * that the ip_cs field is valid and that the tcp_udp_cs
+ * field is valid and contains the TCP checksum.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * This value is zero for TPA End completions.
+ * There is no data in the buffer that corresponds to the opaque
+ * value in this completion.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint32_t opaque;
+ uint8_t v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1)
- /* Address of forwarded request. */
- #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe)
- #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl (size:128b/16B) */
-struct hwrm_async_event_cmpl {
- uint16_t type;
+ #define RX_TPA_V2_END_CMPL_V1 UINT32_C(0x1)
+ /* This value is the number of segments in the TPA operation. */
+ uint8_t tpa_segs;
/*
- * This field indicates the exact type of the completion.
- * By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
- * records.
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
*/
- #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0
- /* HWRM Asynchronous Event Information */
- #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
- #define HWRM_ASYNC_EVENT_CMPL_TYPE_LAST \
- HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT
- /* Identifiers of events. */
- uint16_t event_id;
- /* Link status changed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE \
+ uint16_t agg_id;
+ /*
+ * For non-GRO packets, this value is the
+ * timestamp delta between earliest and latest timestamp values for
+ * TPA packet. If packets were not time stamped, then delta will be
+ * zero.
+ *
+ * For GRO packets, this field is zero except for the following
+ * sub-fields.
+ * - tsdelta[31]
+ * Timestamp present indication. When '0', no Timestamp
+ * option is in the packet. When '1', then a Timestamp
+ * option is present in the packet.
+ */
+ uint32_t tsdelta;
+} __rte_packed;
+
+/*
+ * Last 16 bytes of rx_tpa_v2_end_cmpl.
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_end_cmpl_hi (size:128b/16B) */
+struct rx_tpa_v2_end_cmpl_hi {
+ /*
+ * This value is the number of duplicate ACKs that have been
+ * received as part of the TPA operation.
+ */
+ uint16_t tpa_dup_acks;
+ /*
+ * This value is the number of duplicate ACKs that have been
+ * received as part of the TPA operation.
+ */
+ #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
+ #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_SFT 0
+ /*
+ * This value indicated the offset in bytes from the beginning of
+ * the packet where the inner payload starts. This value is valid
+ * for TCP, UDP, FCoE and RoCE packets
+ */
+ uint8_t payload_offset;
+ /*
+ * The value is the total number of aggregation buffers that were
+ * used in the TPA operation. All TPA aggregation buffer completions
+ * precede the TPA End completion. If the value is zero, then the
+ * aggregation is completely contained in the buffer space provided
+ * in the aggregation start completion.
+ * Note that the field is simply provided as a cross check.
+ */
+ uint8_t tpa_agg_bufs;
+ /*
+ * This value is the valid when TPA completion is active. It
+ * indicates the length of the longest segment of the TPA operation
+ * for LRO mode and the length of the first segment in GRO mode.
+ *
+ * This value may be used by GRO software to re-construct the original
+ * packet stream from the TPA packet. This is the length of all
+ * but the last segment for GRO. In LRO mode this value may be used
+ * to indicate MSS size to the stack.
+ */
+ uint16_t tpa_seg_len;
+ uint16_t unused_1;
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_END_CMPL_V2 UINT32_C(0x1)
+ #define RX_TPA_V2_END_CMPL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_TPA_V2_END_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * This error occurs when there is a fatal HW problem in
+ * the chip only. It indicates that there were not
+ * BDs on chip but that there was adequate reservation.
+ * provided by the TPA block.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * This error occurs when TPA block was not configured to
+ * reserve adequate BDs for TPA operations on this RX
+ * ring. All data for the TPA operation was not placed.
+ *
+ * This error can also be generated when the number of
+ * segments is not programmed correctly in TPA and the
+ * 33 total aggregation buffers allowed for the TPA
+ * operation has been exceeded.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
+ (UINT32_C(0x4) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ uint16_t unused_2;
+ /*
+ * This is the opaque value that was completed for the TPA start
+ * completion that corresponds to this TPA end completion.
+ */
+ uint32_t start_opaque;
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_abuf_cmpl (size:128b/16B) */
+struct rx_tpa_v2_abuf_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_SFT 0
+ /*
+ * RX TPA Aggregation Buffer completion :
+ * Completion of an L2 aggregation buffer in support of
+ * TPA packet completion. Length = 16B
+ */
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG UINT32_C(0x16)
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_LAST \
+ RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG
+ /*
+ * This is the length of the data for the packet stored in this
+ * aggregation buffer identified by the opaque value. This does not
+ * include the length of any
+ * data placed in other aggregation BDs or in the packet or buffer
+ * BDs. This length does not include any space added due to
+ * hdr_offset register during HDS placement mode.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this aggregation
+ * buffer corresponds to.
+ */
+ uint32_t opaque;
+ uint16_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_ABUF_CMPL_V UINT32_C(0x1)
+ /*
+ * This is the aggregation ID that the completion is associated with. Use
+ * this number to correlate the TPA agg completion with the TPA start
+ * completion and the TPA end completion.
+ */
+ uint16_t agg_id;
+ uint32_t unused_1;
+} __rte_packed;
+
+/* rx_abuf_cmpl (size:128b/16B) */
+struct rx_abuf_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_ABUF_CMPL_TYPE_SFT 0
+ /*
+ * RX Aggregation Buffer completion :
+ * Completion of an L2 aggregation buffer in support of
+ * TPA, HDS, or Jumbo packet completion. Length = 16B
+ */
+ #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12)
+ #define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG
+ /*
+ * This is the length of the data for the packet stored in this
+ * aggregation buffer identified by the opaque value. This does not
+ * include the length of any
+ * data placed in other aggregation BDs or in the packet or buffer
+ * BDs. This length does not include any space added due to
+ * hdr_offset register during HDS placement mode.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this aggregation
+ * buffer corresponds to.
+ */
+ uint32_t opaque;
+ uint32_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_ABUF_CMPL_V UINT32_C(0x1)
+ /* unused3 is 32 b */
+ uint32_t unused_2;
+} __rte_packed;
+
+/* VEE FLUSH Completion Record (16 bytes) */
+/* vee_flush (size:128b/16B) */
+struct vee_flush {
+ uint32_t downstream_path_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define VEE_FLUSH_TYPE_MASK UINT32_C(0x3f)
+ #define VEE_FLUSH_TYPE_SFT 0
+ /*
+ * VEE Flush Completion:
+ * This completion is inserted manually by the Primate and processed
+ * by the VEE hardware to ensure that all completions on a VEE
+ * function have been processed by the VEE hardware before FLR
+ * process is completed.
+ */
+ #define VEE_FLUSH_TYPE_VEE_FLUSH UINT32_C(0x1c)
+ #define VEE_FLUSH_TYPE_LAST VEE_FLUSH_TYPE_VEE_FLUSH
+ /* downstream_path is 1 b */
+ #define VEE_FLUSH_DOWNSTREAM_PATH UINT32_C(0x40)
+ /* This completion is associated with VEE Transmit */
+ #define VEE_FLUSH_DOWNSTREAM_PATH_TX (UINT32_C(0x0) << 6)
+ /* This completion is associated with VEE Receive */
+ #define VEE_FLUSH_DOWNSTREAM_PATH_RX (UINT32_C(0x1) << 6)
+ #define VEE_FLUSH_DOWNSTREAM_PATH_LAST VEE_FLUSH_DOWNSTREAM_PATH_RX
+ /*
+ * This is an opaque value that is passed through the completion
+ * to the VEE handler SW and is used to indicate what VEE VQ or
+ * function has completed FLR processing.
+ */
+ uint32_t opaque;
+ uint32_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes will
+ * write 1. The odd passes will write 0.
+ */
+ #define VEE_FLUSH_V UINT32_C(0x1)
+ /* unused3 is 32 b */
+ uint32_t unused_3;
+} __rte_packed;
+
+/* eject_cmpl (size:128b/16B) */
+struct eject_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define EJECT_CMPL_TYPE_SFT 0
+ /*
+ * Statistics Ejection Completion:
+ * Completion of statistics data ejection buffer.
+ * Length = 16B
+ */
+ #define EJECT_CMPL_TYPE_STAT_EJECT UINT32_C(0x1a)
+ #define EJECT_CMPL_TYPE_LAST EJECT_CMPL_TYPE_STAT_EJECT
+ #define EJECT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define EJECT_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define EJECT_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * This is the length of the statistics data stored in this
+ * buffer.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this ejection
+ * buffer corresponds to.
+ */
+ uint32_t opaque;
+ uint16_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define EJECT_CMPL_V UINT32_C(0x1)
+ #define EJECT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define EJECT_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for statistics ejection. The statistics ejection should
+ * be treated as invalid
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Did Not Fit:
+ * Statistics did not fit into aggregation buffer provided.
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ /* reserved16 is 16 b */
+ uint16_t reserved16;
+ /* unused3 is 32 b */
+ uint32_t unused_2;
+} __rte_packed;
+
+/* hwrm_cmpl (size:128b/16B) */
+struct hwrm_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_CMPL_TYPE_SFT 0
+ /*
+ * HWRM Command Completion:
+ * Completion of an HWRM command.
+ */
+ #define HWRM_CMPL_TYPE_HWRM_DONE UINT32_C(0x20)
+ #define HWRM_CMPL_TYPE_LAST HWRM_CMPL_TYPE_HWRM_DONE
+ /* This is the sequence_id of the HWRM command that has completed. */
+ uint16_t sequence_id;
+ /* unused2 is 32 b */
+ uint32_t unused_1;
+ uint32_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_CMPL_V UINT32_C(0x1)
+ /* unused4 is 32 b */
+ uint32_t unused_3;
+} __rte_packed;
+
+/* hwrm_fwd_req_cmpl (size:128b/16B) */
+struct hwrm_fwd_req_cmpl {
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ uint16_t req_len_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_FWD_REQ_CMPL_TYPE_SFT 0
+ /* Forwarded HWRM Request */
+ #define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ UINT32_C(0x22)
+ #define HWRM_FWD_REQ_CMPL_TYPE_LAST \
+ HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ
+ /* Length of forwarded request in bytes. */
+ #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0)
+ #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6
+ /*
+ * Source ID of this request.
+ * Typically used in forwarding requests and responses.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - HWRM
+ */
+ uint16_t source_id;
+ /* unused1 is 32 b */
+ uint32_t unused0;
+ /* Address of forwarded request. */
+ uint32_t req_buf_addr_v[2];
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1)
+ /* Address of forwarded request. */
+ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe)
+ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
+} __rte_packed;
+
+/* hwrm_fwd_resp_cmpl (size:128b/16B) */
+struct hwrm_fwd_resp_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_FWD_RESP_CMPL_TYPE_SFT 0
+ /* Forwarded HWRM Response */
+ #define HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP UINT32_C(0x24)
+ #define HWRM_FWD_RESP_CMPL_TYPE_LAST \
+ HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP
+ /*
+ * Source ID of this response.
+ * Typically used in forwarding requests and responses.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - HWRM
+ */
+ uint16_t source_id;
+ /* Length of forwarded response in bytes. */
+ uint16_t resp_len;
+ /* unused2 is 16 b */
+ uint16_t unused_1;
+ /* Address of forwarded request. */
+ uint32_t resp_buf_addr_v[2];
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1)
+ /* Address of forwarded request. */
+ #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe)
+ #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1
+} __rte_packed;
+
+/* hwrm_async_event_cmpl (size:128b/16B) */
+struct hwrm_async_event_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Link status changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE \
UINT32_C(0x0)
/* Link MTU changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE \
*/
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CFG_CHANGE \
UINT32_C(0x3c)
- /* TFLIB unique default VNIC Configuration Change */
+ /*
+ * Deprecated.
+ * TFLIB unique default VNIC Configuration Change
+ */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_DEFAULT_VNIC_CHANGE \
UINT32_C(0x3d)
- /* TFLIB unique link status changed */
+ /*
+ * Deprecated.
+ * TFLIB unique link status changed
+ */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_LINK_STATUS_CHANGE \
UINT32_C(0x3e)
+ /*
+ * An event signifying completion for HWRM_FW_STATE_QUIESCE
+ * (completion, timeout, or error)
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_QUIESCE_DONE \
+ UINT32_C(0x3f)
+ /*
+ * An event signifying a HWRM command is in progress and its
+ * response will be deferred. This event is used on crypto controllers
+ * only.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFERRED_RESPONSE \
+ UINT32_C(0x40)
+ /*
+ * An event signifying that a PFC WatchDog configuration
+ * has changed on any port / cos.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \
+ UINT32_C(0x41)
/*
* A trace log message. This contains firmware trace logs string
* embedded in the asynchronous message. This is an experimental
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1)
/* opaque is 7 b */
uint16_t timestamp_hi;
/* Event specific data */
uint32_t event_data1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_status_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_status_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0xff00000)
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_SFT \
20
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_mtu_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_speed_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0xffff0000)
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT \
16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */
struct hwrm_async_event_cmpl_dcb_config_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \
UINT32_C(0x1)
(UINT32_C(0xff) << 24)
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \
HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */
struct hwrm_async_event_cmpl_port_conn_not_allowed {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \
UINT32_C(0x1)
(UINT32_C(0x3) << 16)
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \
HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */
struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_speed_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \
UINT32_C(0x1)
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \
UINT32_C(0x20000)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_port_phy_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \
UINT32_C(0x1)
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \
UINT32_C(0x40000)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_reset_notify (size:128b/16B) */
struct hwrm_async_event_cmpl_reset_notify {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_V UINT32_C(0x1)
/* opaque is 7 b */
UINT32_C(0xffff0000)
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_SFT \
16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_error_recovery (size:128b/16B) */
struct hwrm_async_event_cmpl_error_recovery {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_V UINT32_C(0x1)
/* opaque is 7 b */
*/
#define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_RECOVERY_ENABLED \
UINT32_C(0x2)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */
struct hwrm_async_event_cmpl_func_drvr_unload {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1)
/* opaque is 7 b */
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */
struct hwrm_async_event_cmpl_func_drvr_load {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */
struct hwrm_async_event_cmpl_func_flr_proc_cmplt {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */
struct hwrm_async_event_cmpl_pf_drvr_unload {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \
UINT32_C(0x70000)
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */
struct hwrm_async_event_cmpl_pf_drvr_load {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \
UINT32_C(0x70000)
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */
struct hwrm_async_event_cmpl_vf_flr {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \
UINT32_C(0xff0000)
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */
struct hwrm_async_event_cmpl_vf_mac_addr_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */
struct hwrm_async_event_cmpl_pf_vf_comm_status_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \
UINT32_C(0x1)
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \
UINT32_C(0x1)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_vf_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \
UINT32_C(0x10)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */
struct hwrm_async_event_cmpl_llfc_pfc_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
UINT32_C(0x1fffe0)
#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \
5
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */
struct hwrm_async_event_cmpl_default_vnic_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \
6
/* Identifiers of events. */
uint16_t event_id;
- /* Notification of a default vnic allocaiton or free */
+ /* Notification of a default vnic allocation or free */
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \
UINT32_C(0x35)
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0x3fffc00)
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \
10
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_hw_flow_aged (size:128b/16B) */
struct hwrm_async_event_cmpl_hw_flow_aged {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_V UINT32_C(0x1)
/* opaque is 7 b */
(UINT32_C(0x1) << 31)
#define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_LAST \
HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_cache_flush_req (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_cache_flush_req {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_V \
UINT32_C(0x1)
uint16_t timestamp_hi;
/* Event specific data */
uint32_t event_data1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_cache_flush_done (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_cache_flush_done {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_tcp_flag_action_change (size:128b/16B) */
struct hwrm_async_event_cmpl_tcp_flag_action_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_V \
UINT32_C(0x1)
uint16_t timestamp_hi;
/* Event specific data */
uint32_t event_data1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_flow_active (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_flow_active {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_V UINT32_C(0x1)
/* opaque is 7 b */
(UINT32_C(0x1) << 31)
#define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_LAST \
HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_RX_ENABLE \
UINT32_C(0x2)
-} __attribute__((packed));
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_quiesce_done (size:128b/16B) */
+struct hwrm_async_event_cmpl_quiesce_done {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* An event signifying completion of HWRM_FW_STATE_QUIESCE */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Status of HWRM_FW_STATE_QUIESCE completion */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SFT \
+ 0
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE
+ * completed successfully.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SUCCESS \
+ UINT32_C(0x0)
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE timed
+ * out.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_TIMEOUT \
+ UINT32_C(0x1)
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE
+ * encountered an error.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR
+ /* opaque is 8 b */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_OPAQUE_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_OPAQUE_SFT \
+ 8
+ /*
+ * Additional information about internal hardware state related to
+ * idle/quiesce state. QUIESCE may succeed per quiesce_status
+ * regardless of idle_state_flags. If QUIESCE fails, the host may
+ * inspect idle_state_flags to determine whether a retry is warranted.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_SFT \
+ 16
+ /*
+ * Failure to quiesce is caused by host not updating the NQ consumer
+ * index.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_INCOMPLETE_NQ \
+ UINT32_C(0x10000)
+ /* Flag 1 indicating partial non-idle state. */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_1 \
+ UINT32_C(0x20000)
+ /* Flag 2 indicating partial non-idle state. */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_2 \
+ UINT32_C(0x40000)
+ /* Flag 3 indicating partial non-idle state. */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_3 \
+ UINT32_C(0x80000)
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Time stamp for error event */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA1_TIMESTAMP \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_deferred_response (size:128b/16B) */
+struct hwrm_async_event_cmpl_deferred_response {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * An event signifying a HWRM command is in progress and its
+ * response will be deferred
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_DEFERRED_RESPONSE \
+ UINT32_C(0x40)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_DEFERRED_RESPONSE
+ /* Event specific data */
+ uint32_t event_data2;
+ /*
+ * The PF's mailbox is clear to issue another command.
+ * A command with this seq_id is still in progress
+ * and will return a regular HWRM completion when done.
+ * 'event_data1' field, if non-zero, contains the estimated
+ * execution time for the command.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_DATA2_SEQ_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_DATA2_SEQ_ID_SFT \
+ 0
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Estimated remaining time of command execution in ms (if not zero) */
+ uint32_t event_data1;
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_pfc_watchdog_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_pfc_watchdog_cfg_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* PFC watchdog configuration change for given port/cos */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \
+ UINT32_C(0x41)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * 1 in bit position X indicates PFC watchdog should
+ * be on for COSX
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_SFT \
+ 0
+ /* 1 means PFC WD for COS0 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS0 \
+ UINT32_C(0x1)
+ /* 1 means PFC WD for COS1 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS1 \
+ UINT32_C(0x2)
+ /* 1 means PFC WD for COS2 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS2 \
+ UINT32_C(0x4)
+ /* 1 means PFC WD for COS3 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS3 \
+ UINT32_C(0x8)
+ /* 1 means PFC WD for COS4 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS4 \
+ UINT32_C(0x10)
+ /* 1 means PFC WD for COS5 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS5 \
+ UINT32_C(0x20)
+ /* 1 means PFC WD for COS6 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS6 \
+ UINT32_C(0x40)
+ /* 1 means PFC WD for COS7 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS7 \
+ UINT32_C(0x80)
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff00)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 8
+} __rte_packed;
/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */
struct hwrm_async_event_cmpl_fw_trace_msg {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_MASK \
UINT32_C(0xff000000)
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_SFT 24
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */
struct hwrm_async_event_cmpl_hwrm_error {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1)
/* opaque is 7 b */
/* Time stamp for error event */
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \
UINT32_C(0x1)
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_func_reset *
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \
HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_reset_output (size:128b/16B) */
struct hwrm_func_reset_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_func_getfid *
*/
uint16_t pci_id;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_getfid_output (size:128b/16B) */
struct hwrm_func_getfid_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_vf_alloc *
uint16_t first_vf_id;
/* The number of virtual functions requested. */
uint16_t num_vfs;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_alloc_output (size:128b/16B) */
struct hwrm_func_vf_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_func_vf_free *
* 0xFFFF - Cleanup all children of this PF.
*/
uint16_t num_vfs;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_free_output (size:128b/16B) */
struct hwrm_func_vf_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_func_vf_cfg *
*/
#define HWRM_FUNC_VF_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \
UINT32_C(0x80)
+ /*
+ * If this bit is set to 1, the VF driver is requesting FW to enable
+ * PPP TX PUSH feature on all the TX rings specified in the
+ * num_tx_rings field. By default, the PPP TX push feature is
+ * disabled for all the TX rings of the VF. This flag is ignored if
+ * the num_tx_rings field is not specified or the VF doesn't support
+ * PPP tx push feature.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_PPP_PUSH_MODE_ENABLE \
+ UINT32_C(0x100)
/* The number of RSS/COS contexts requested for the VF. */
uint16_t num_rsscos_ctxs;
/* The number of completion rings requested for the VF. */
/* The number of HW ring groups requested for the VF. */
uint16_t num_hw_ring_grps;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_cfg_output (size:128b/16B) */
struct hwrm_func_vf_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_func_qcaps *
* Function ID of the function that is being queried.
* 0xFF... (All Fs) if the query is for the requesting
* function.
+ * 0xFFFE (REQUESTING_PARENT_FID) This is a special FID
+ * to be used by a trusted VF to query its parent PF.
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_func_qcaps_output (size:640b/80B) */
+/* hwrm_func_qcaps_output (size:704b/88B) */
struct hwrm_func_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_STATS_SUPPORTED \
UINT32_C(0x1000000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored.
+ * If this query is for a PF and this flag is set to 1, then host
+ * must initiate reset or reload (or fastboot) the firmware image
+ * upon detection of device shutdown state.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERR_RECOVER_RELOAD \
+ UINT32_C(0x2000000)
+ /*
+ * If the query is for a VF, then this flag (always set to 0) shall
+ * be ignored. If this query is for a PF and this flag is set to 1,
+ * host, when registered for the default vnic change async event,
+ * receives async notification whenever a default vnic state is
+ * changed for any of child or adopted VFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NOTIFY_VF_DEF_VNIC_CHNG_SUPPORTED \
+ UINT32_C(0x4000000)
+ /* If set to 1, then the vlan acceleration for TX is disabled. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VLAN_ACCELERATION_TX_DISABLED \
+ UINT32_C(0x8000000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * DBG_COREDUMP_XXX commands.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_COREDUMP_CMD_SUPPORTED \
+ UINT32_C(0x10000000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * DBG_CRASHDUMP_XXX commands.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_CRASHDUMP_CMD_SUPPORTED \
+ UINT32_C(0x20000000)
+ /*
+ * If the query is for a VF, then this flag should be ignored.
+ * If the query is for a PF and this flag is set to 1, then
+ * the PF has the capability to support retrieval of
+ * rx_port_stats_ext_pfc_wd statistics (supported by the PFC
+ * WatchDog feature) via the hwrm_port_qstats_ext_pfc_wd command.
+ * If this flag is set to 1, only that (supported) command should
+ * be used for retrieval of PFC related statistics (rather than
+ * hwrm_port_qstats_ext command, which could previously be used).
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PFC_WD_STATS_SUPPORTED \
+ UINT32_C(0x40000000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * DBG_QCAPS command
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_DBG_QCAPS_CMD_SUPPORTED \
+ UINT32_C(0x80000000)
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
* (max_tx_rings) to the function.
*/
uint16_t max_sp_tx_rings;
- uint8_t unused_0;
+ uint8_t unused_0[2];
+ uint32_t flags_ext;
+ /*
+ * If 1, the device can be configured to set the ECN bits in the
+ * IP header of received packets if the receive queue length
+ * exceeds a given threshold.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECN_MARK_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * If 1, the device can report the number of received packets
+ * that it marked as having experienced congestion.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECN_STATS_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If 1, the device can report extended hw statistics (including
+ * additional tpa statistics).
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_EXT_HW_STATS_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, then the core firmware has support to enable/
+ * disable hot reset support for interface dynamically through
+ * HWRM_FUNC_CFG.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_HOT_RESET_IF_SUPPORT \
+ UINT32_C(0x8)
+ /* If 1, the proxy mode is supported on this function */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PROXY_MODE_SUPPORT \
+ UINT32_C(0x10)
+ /*
+ * If 1, the tx rings source interface override feature is supported
+ * on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_TX_PROXY_SRC_INTF_OVERRIDE_SUPPORT \
+ UINT32_C(0x20)
+ /*
+ * If 1, the device supports scheduler queues. SQs can be managed
+ * using RING_SQ_ALLOC/CFG/FREE commands.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_SQ_SUPPORTED \
+ UINT32_C(0x40)
+ /*
+ * If set to 1, then this function supports the TX push mode that
+ * uses ping-pong buffers from the push pages.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PPP_PUSH_MODE_SUPPORTED \
+ UINT32_C(0x80)
+ /* The maximum number of SQs supported by this device. */
+ uint8_t max_sqs;
+ uint8_t unused_1[2];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_func_qcfg *
* Function ID of the function that is being queried.
* 0xFF... (All Fs) if the query is for the requesting
* function.
+ * 0xFFFE (REQUESTING_PARENT_FID) This is a special FID
+ * to be used by a trusted VF to query its parent PF.
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_func_qcfg_output (size:704b/88B) */
+/* hwrm_func_qcfg_output (size:768b/96B) */
struct hwrm_func_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \
UINT32_C(0x100)
+ /*
+ * If set to 1, then the firmware and all currently registered driver
+ * instances support hot reset. The hot reset support will be updated
+ * dynamically based on the driver interface advertisement.
+ * If set to 0, then the adapter is not currently able to initiate
+ * hot reset.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_HOT_RESET_ALLOWED \
+ UINT32_C(0x200)
+ /*
+ * If set to 1, then the PPP tx push mode is enabled for all the
+ * reserved TX rings of this function. If set to 0, then PPP tx push
+ * mode is disabled for all the reserved TX rings of this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PPP_PUSH_MODE_ENABLED \
+ UINT32_C(0x400)
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
* after receiving the RESET Notify event.
*/
uint32_t reset_addr_poll;
- uint8_t unused_2[3];
+ /*
+ * This field specifies legacy L2 doorbell size in KBytes. Drivers should use
+ * this value to find out the doorbell page offset from the BAR.
+ */
+ uint16_t legacy_l2_db_size_kb;
+ uint16_t svif_info;
+ /*
+ * This field specifies the source virtual interface of the function being
+ * queried. Drivers can use this to program svif field in the L2 context
+ * table
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_MASK UINT32_C(0x7fff)
+ #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_SFT 0
+ /* This field specifies whether svif is valid or not */
+ #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_VALID UINT32_C(0x8000)
+ uint8_t unused_2[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************
* hwrm_func_cfg *
*****************/
-/* hwrm_func_cfg_input (size:704b/88B) */
+/* hwrm_func_cfg_input (size:768b/96B) */
struct hwrm_func_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \
UINT32_C(0x2000000)
+ /*
+ * If this bit is set to 0, then the interface does not support hot
+ * reset capability which it advertised with the hot_reset_support
+ * flag in HWRM_FUNC_DRV_RGTR. If any of the function has set this
+ * flag to 0, adapter cannot do the hot reset. In this state, if the
+ * firmware receives a hot reset request, firmware must fail the
+ * request. If this bit is set to 1, then interface is renabling the
+ * hot reset capability.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_HOT_RESET_IF_EN_DIS \
+ UINT32_C(0x4000000)
+ /*
+ * If this bit is set to 1, the PF driver is requesting FW
+ * to enable PPP TX PUSH feature on all the TX rings specified in
+ * the num_tx_rings field. By default, the PPP TX push feature is
+ * disabled for all the TX rings of the function. This flag is
+ * ignored if num_tx_rings field is not specified or the function
+ * doesn't support PPP tx push feature.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_PPP_PUSH_MODE_ENABLE \
+ UINT32_C(0x8000000)
uint32_t enables;
/*
* This bit must be '1' for the mtu field to be
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_LINK_STATE \
UINT32_C(0x400000)
+ /*
+ * This bit must be '1' for the hot_reset_if_en_dis field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_HOT_RESET_IF_SUPPORT \
+ UINT32_C(0x800000)
+ /*
+ * This bit must be '1' for the sq_id field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_SQ_ID \
+ UINT32_C(0x1000000)
/*
* The maximum transmission unit of the function.
* The HWRM should make sure that the mtu of
* be reserved for this function on the RX side.
*/
uint16_t num_mcast_filters;
-} __attribute__((packed));
+ /* Used by a PF driver to associate a SQ with a VF. */
+ uint16_t sq_id;
+ uint8_t unused_0[6];
+} __rte_packed;
/* hwrm_func_cfg_output (size:128b/16B) */
struct hwrm_func_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_func_qstats *
* Function ID of the function that is being queried.
* 0xFF... (All Fs) if the query is for the requesting
* function.
+ * A privileged PF can query for other function's statistics.
*/
uint16_t fid;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* This flags indicates the type of statistics request. */
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * flags should be set to 1 when request is for only RoCE statistics.
+ * This will be honored only if the caller_fid is a privileged PF.
+ * In all other cases FID and caller_fid should be the same.
+ */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1)
+ /*
+ * flags should be set to 2 when request is for the counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x2)
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_LAST \
+ HWRM_FUNC_QSTATS_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[5];
+} __rte_packed;
/* hwrm_func_qstats_output (size:1408b/176B) */
struct hwrm_func_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***********************
- * hwrm_func_clr_stats *
- ***********************/
+/************************
+ * hwrm_func_qstats_ext *
+ ************************/
-/* hwrm_func_clr_stats_input (size:192b/24B) */
-struct hwrm_func_clr_stats_input {
+/* hwrm_func_qstats_ext_input (size:256b/32B) */
+struct hwrm_func_qstats_ext_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
*/
uint64_t resp_addr;
/*
- * Function ID of the function.
+ * Function ID of the function that is being queried.
* 0xFF... (All Fs) if the query is for the requesting
* function.
+ * A privileged PF can query for other function's statistics.
*/
uint16_t fid;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* This flags indicates the type of statistics request. */
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * flags should be set to 1 when request is for only RoCE statistics.
+ * This will be honored only if the caller_fid is a privileged PF.
+ * In all other cases FID and caller_fid should be the same.
+ */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1)
+ /*
+ * flags should be set to 2 when request is for the counter mask
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x2)
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_LAST \
+ HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[1];
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the sq_id and traffic_class fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_ENABLES_SQ_ID UINT32_C(0x1)
+ /* Specifies the SQ for which to gather statistics */
+ uint16_t sq_id;
+ /*
+ * Specifies the traffic class for which to gather statistics. Valid
+ * values are 0 through (max_configurable_queues - 1), where
+ * max_configurable_queues is in the response of HWRM_QUEUE_QPORTCFG
+ */
+ uint16_t traffic_class;
+ uint8_t unused_1[4];
+} __rte_packed;
-/* hwrm_func_clr_stats_output (size:128b/16B) */
-struct hwrm_func_clr_stats_output {
+/* hwrm_func_qstats_ext_output (size:1472b/184B) */
+struct hwrm_func_qstats_ext_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* Number of received unicast packets */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of discarded packets on received path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
+ /* Number of discarded packets on transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of TPA eligible packets */
+ uint64_t rx_tpa_eligible_pkt;
+ /* Number of TPA eligible bytes */
+ uint64_t rx_tpa_eligible_bytes;
+ /* Number of TPA packets */
+ uint64_t rx_tpa_pkt;
+ /* Number of TPA bytes */
+ uint64_t rx_tpa_bytes;
+ /* Number of TPA errors */
+ uint64_t rx_tpa_errors;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**************************
- * hwrm_func_vf_resc_free *
- **************************/
+/***********************
+ * hwrm_func_clr_stats *
+ ***********************/
-/* hwrm_func_vf_resc_free_input (size:192b/24B) */
-struct hwrm_func_vf_resc_free_input {
+/* hwrm_func_clr_stats_input (size:192b/24B) */
+struct hwrm_func_clr_stats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ */
+ uint16_t fid;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_clr_stats_output (size:128b/16B) */
+struct hwrm_func_clr_stats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_func_vf_resc_free *
+ **************************/
+
+
+/* hwrm_func_vf_resc_free_input (size:192b/24B) */
+struct hwrm_func_vf_resc_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
*/
uint16_t vf_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_resc_free_output (size:128b/16B) */
struct hwrm_func_vf_resc_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_drv_rgtr *
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_ERROR_RECOVERY_SUPPORT \
UINT32_C(0x20)
+ /*
+ * When this bit is 1, the function is indicating the support of the
+ * Master capability. The Firmware will use this capability to select the
+ * Master function. The master function will be used to initiate
+ * designated functionality like error recovery etc… If none of the
+ * registered PF’s or trusted VF’s indicate this support, then
+ * firmware will select the 1st registered PF as Master capable instance.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_MASTER_SUPPORT \
+ UINT32_C(0x40)
uint32_t enables;
/*
* This bit must be '1' for the os_type field to be
uint16_t ver_upd;
/* This is the 16bit patch version of the driver. */
uint16_t ver_patch;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_rgtr_output (size:128b/16B) */
struct hwrm_func_drv_rgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_func_drv_unrgtr *
#define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
UINT32_C(0x1)
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_unrgtr_output (size:128b/16B) */
struct hwrm_func_drv_unrgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_buf_rgtr *
* HWRM.
*/
uint64_t resp_buf_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_buf_rgtr_output (size:128b/16B) */
struct hwrm_func_buf_rgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_func_buf_unrgtr *
*/
uint16_t vf_id;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_buf_unrgtr_output (size:128b/16B) */
struct hwrm_func_buf_unrgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_drv_qver *
*/
uint16_t fid;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_qver_output (size:256b/32B) */
struct hwrm_func_drv_qver_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_func_resource_qcaps *
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_resource_qcaps_output (size:448b/56B) */
struct hwrm_func_resource_qcaps_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************************
* hwrm_func_backing_store_qcaps *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_func_backing_store_qcaps_output (size:576b/72B) */
+/* hwrm_func_backing_store_qcaps_output (size:640b/80B) */
struct hwrm_func_backing_store_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
*
* TQM slowpath rings should be sized as follows:
*
- * num_entries = num_vnics + num_l2_tx_rings + num_roce_qps + tqm_min_size
+ * num_entries = num_vnics + num_l2_tx_rings + 2 * num_roce_qps + tqm_min_size
*
* Where:
* num_vnics is the number of VNICs allocated in the VNIC backing store
* limitations.
*/
uint8_t tqm_entries_multiple;
+ /*
+ * Initializer to be used by drivers
+ * to initialize context memory to ensure
+ * context subsystem flags an error for an attack
+ * before the first time context load.
+ */
+ uint8_t ctx_kind_initializer;
+ /* Reserved for future. */
+ uint32_t rsvd;
+ /* Reserved for future. */
+ uint16_t rsvd1;
+ /*
+ * Count of TQM fastpath rings to be used for allocating backing store.
+ * Backing store configuration must be specified for each TQM ring from
+ * this count in `backing_store_cfg`.
+ */
+ uint8_t tqm_fp_rings_count;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_func_backing_store_cfg *
*
* TQM slowpath rings should be sized as follows:
*
- * num_entries = num_vnics + num_l2_tx_rings + num_roce_qps + tqm_min_size
+ * num_entries = num_vnics + num_l2_tx_rings + 2 * num_roce_qps + tqm_min_size
*
* Where:
* num_vnics is the number of VNICs allocated in the VNIC backing store
uint16_t mrav_entry_size;
/* Number of bytes that have been allocated for each context entry. */
uint16_t tim_entry_size;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_backing_store_cfg_output (size:128b/16B) */
struct hwrm_func_backing_store_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_func_backing_store_qcfg *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */
struct hwrm_func_backing_store_qcfg_output {
* is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_error_recovery_qcfg *
*/
uint64_t resp_addr;
uint8_t unused_0[8];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_error_recovery_qcfg_output (size:1664b/208B) */
struct hwrm_error_recovery_qcfg_output {
* this much time after writing reset_reg_val in reset_reg.
*/
uint8_t delay_after_reset[16];
- uint8_t unused_1[7];
+ /*
+ * Error recovery counter.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t err_recovery_cnt_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SFT \
+ 2
+ uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_func_vlan_qcfg *
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vlan_qcfg_output (size:320b/40B) */
struct hwrm_func_vlan_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_vlan_cfg *
/* Future use. */
uint32_t rsvd2;
uint8_t unused_3[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vlan_cfg_output (size:128b/16B) */
struct hwrm_func_vlan_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_func_vf_vnic_ids_query *
uint32_t max_vnic_id_cnt;
/* This is the address for VF VNIC ID table */
uint64_t vnic_id_tbl_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */
struct hwrm_func_vf_vnic_ids_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_func_vf_bw_cfg *
(UINT32_C(0xf) << 12)
#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_LAST \
HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_bw_cfg_output (size:128b/16B) */
struct hwrm_func_vf_bw_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_func_vf_bw_qcfg *
/* The physical VF id of interest */
#define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff)
#define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_SFT 0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_bw_qcfg_output (size:960b/120B) */
struct hwrm_func_vf_bw_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_func_drv_if_change *
*/
#define HWRM_FUNC_DRV_IF_CHANGE_INPUT_FLAGS_UP UINT32_C(0x1)
uint32_t unused;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_if_change_output (size:128b/16B) */
struct hwrm_func_drv_if_change_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_func_host_pf_ids_query *
#define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_LAST \
HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE
uint8_t unused_1[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_host_pf_ids_query_output (size:128b/16B) */
struct hwrm_func_host_pf_ids_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_port_phy_cfg *
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED \
UINT32_C(0x2)
/*
- * When this bit is set to '1', the link shall be forced to
- * the force_link_speed value.
+ * When this bit is set to '1', and the force_pam4_link_speed
+ * bit in the 'enables' field is '0', the link shall be forced
+ * to the force_link_speed value.
+ *
+ * When this bit is set to '1', and the force_pam4_link_speed
+ * bit in the 'enables' field is '1', the link shall be forced
+ * to the force_pam4_link_speed value.
*
* When this bit is set to '1', the HWRM client should
* not enable any of the auto negotiation related
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
/*
* The HW will be configured with external loopback such that
- * host data is sent on the trasmitter and based on the external
+ * host data is sent on the transmitter and based on the external
* loopback connection the data will be received without modification.
*/
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL UINT32_C(0x3)
/* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB \
UINT32_C(0x40)
- uint8_t unused_2[2];
/*
- * Reuested setting of TX LPI timer in microseconds.
+ * This is the speed that will be used if the force and force_pam4
+ * bits are '1'. If unsupported speed is selected, an error
+ * will be generated.
+ */
+ uint16_t force_pam4_link_speed;
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_50GB \
+ UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_100GB \
+ UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_200GB \
+ UINT32_C(0x7d0)
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_200GB
+ /*
+ * Requested setting of TX LPI timer in microseconds.
* This field is valid only when EEE is enabled and TX LPI is
* enabled.
*/
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
uint32_t unused_3;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_cfg_output (size:128b/16B) */
struct hwrm_port_phy_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_cfg_cmd_err (size:64b/8B) */
struct hwrm_port_phy_cfg_cmd_err {
#define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_LAST \
HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_port_phy_qcfg *
/* Port ID of port that is to be queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_qcfg_output (size:768b/96B) */
struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
/*
* The HW will be configured with external loopback such that
- * host data is sent on the trasmitter and based on the external
+ * host data is sent on the transmitter and based on the external
* loopback connection the data will be received without modification.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL UINT32_C(0x3)
/* Module is not inserted. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
UINT32_C(0x4)
+ /* Module is powered down because of over current fault. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_CURRENTFAULT \
+ UINT32_C(0x5)
/* Module status is not applicable. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
UINT32_C(0xff)
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_port_mac_cfg *
#define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \
UINT32_C(0x100)
/*
- * When this bit is '1', the the Out-Of-Box WoL is requested to
+ * When this bit is '1', the Out-Of-Box WoL is requested to
* be disabled on this port.
*/
#define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \
* This field shall be ignored if the ptp_tx_ts_capture_enable
* flag is not set in this command.
* Otherwise, if bit 'i' is set, then the HWRM is being
- * requested to configure the transmit sied of the port to
+ * requested to configure the transmit side of the port to
* capture the time stamp of every transmitted PTP message
* with messageType field value set to i.
*/
*/
int32_t ptp_freq_adj_ppb;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_mac_cfg_output (size:128b/16B) */
struct hwrm_port_mac_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_port_mac_qcfg *
/* Port ID of port that is to be configured. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_port_mac_qcfg_output (size:192b/24B) */
+/* hwrm_port_mac_qcfg_output (size:256b/32B) */
struct hwrm_port_mac_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
UINT32_C(0xe0)
#define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \
5
+ uint8_t unused_1;
+ uint16_t port_svif_info;
+ /*
+ * This field specifies the source virtual interface of the port being
+ * queried. Drivers can use this to program port svif field in the
+ * L2 context table
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_MASK \
+ UINT32_C(0x7fff)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_SFT 0
+ /* This field specifies whether port_svif is valid or not */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_VALID \
+ UINT32_C(0x8000)
+ uint8_t unused_2[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_port_mac_ptp_qcfg *
/* Port ID of port that is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */
struct hwrm_port_mac_ptp_qcfg_output {
*/
#define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_DIRECT_ACCESS \
UINT32_C(0x1)
- /*
- * When this bit is set to '1', the PTP information is accessible
- * via HWRM commands.
- */
- #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \
- UINT32_C(0x2)
/*
* When this bit is set to '1', the device supports one-step
* Tx timestamping.
*/
#define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_ONE_STEP_TX_TS \
UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the PTP information is accessible
+ * via HWRM commands.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \
+ UINT32_C(0x8)
uint8_t unused_0[3];
/* Offset of the PTP register for the lower 32 bits of timestamp for RX. */
uint32_t rx_ts_reg_off_lower;
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/* Port Tx Statistics Formats */
+/* Port Tx Statistics Format */
/* tx_port_stats (size:3264b/408B) */
struct tx_port_stats {
/* Total Number of 64 Bytes frames transmitted */
uint64_t tx_stat_discard;
/* Total Tx Error Drops per Port reported by STATS block */
uint64_t tx_stat_error;
-} __attribute__((packed));
+} __rte_packed;
-/* Port Rx Statistics Formats */
+/* Port Rx Statistics Format */
/* rx_port_stats (size:4224b/528B) */
struct rx_port_stats {
/* Total Number of 64 Bytes frames received */
/* Total Rx Discards per Port reported by STATS block */
uint64_t rx_stat_discard;
uint64_t rx_stat_err;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_port_qstats *
uint64_t resp_addr;
/* Port ID of port that is being queried. */
uint16_t port_id;
- uint8_t unused_0[6];
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_PORT_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_PORT_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ #define HWRM_PORT_QSTATS_INPUT_FLAGS_LAST \
+ HWRM_PORT_QSTATS_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[5];
/*
* This is the host address where
* Tx port statistics will be stored
* Rx port statistics will be stored
*/
uint64_t rx_stat_host_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_qstats_output (size:128b/16B) */
struct hwrm_port_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/* Port Tx Statistics extended Formats */
+/* Port Tx Statistics extended Format */
/* tx_port_stats_ext (size:2048b/256B) */
struct tx_port_stats_ext {
/* Total number of tx bytes count on cos queue 0 */
uint64_t pfc_pri7_tx_duration_us;
/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
uint64_t pfc_pri7_tx_transitions;
-} __attribute__((packed));
+} __rte_packed;
-/* Port Rx Statistics extended Formats */
+/* Port Rx Statistics extended Format */
/* rx_port_stats_ext (size:3648b/456B) */
struct rx_port_stats_ext {
/* Number of times link state changed to down */
uint64_t rx_discard_packets_cos6;
/* Total number of rx discard packets count on cos queue 7 */
uint64_t rx_discard_packets_cos7;
-} __attribute__((packed));
+} __rte_packed;
+
+/*
+ * Port Rx Statistics extended PFC WatchDog Format.
+ * StormDetect and StormRevert event determination is based
+ * on an integration period and a percentage threshold.
+ * StormDetect event - when percentage of XOFF frames received
+ * within an integration period exceeds the configured threshold.
+ * StormRevert event - when percentage of XON frames received
+ * within an integration period exceeds the configured threshold.
+ * Actual number of XOFF/XON frames for the events to be triggered
+ * depends on both configured integration period and sampling rate.
+ * The statistics in this structure represent counts of specified
+ * events from the moment the feature (PFC WatchDog) is enabled via
+ * hwrm_queue_pfc_enable_cfg call.
+ */
+/* rx_port_stats_ext_pfc_wd (size:5120b/640B) */
+struct rx_port_stats_ext_pfc_wd {
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri0;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri1;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri2;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri3;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri4;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri5;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri6;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri7;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri0;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri1;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri2;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri3;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri4;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri5;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri6;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri7;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri0;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri1;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri2;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri3;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri4;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri5;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri6;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri7;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri0;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri1;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri2;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri3;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri4;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri5;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri6;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri7;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri0;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri1;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri2;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri3;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri4;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri5;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri6;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri7;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri0;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri1;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri2;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri3;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri4;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri5;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri6;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri7;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri0;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri1;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri2;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri3;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri4;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri5;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri6;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri7;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri0;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri1;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri2;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri3;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri4;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri5;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri6;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri7;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri0;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri1;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri2;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri3;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri4;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri5;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri6;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri7;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri0;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri1;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri2;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri3;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri4;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri5;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri6;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri7;
+} __rte_packed;
/************************
* hwrm_port_qstats_ext *
* statistics block in bytes
*/
uint16_t rx_stat_size;
- uint8_t unused_0[2];
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * This bit is set to 1 when request is for the counter mask,
+ * representing width of each of the stats counters, rather than
+ * counters themselves.
+ */
+ #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_LAST \
+ HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0;
/*
* This is the host address where
* Tx port statistics will be stored
* Rx port statistics will be stored
*/
uint64_t rx_stat_host_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_qstats_ext_output (size:128b/16B) */
struct hwrm_port_qstats_ext_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
+
+/*******************************
+ * hwrm_port_qstats_ext_pfc_wd *
+ *******************************/
+
+
+/* hwrm_port_qstats_ext_pfc_wd_input (size:256b/32B) */
+struct hwrm_port_qstats_ext_pfc_wd_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ /*
+ * The size of rx_port_stats_ext_pfc_wd
+ * block in bytes
+ */
+ uint16_t pfc_wd_stat_size;
+ uint8_t unused_0[4];
+ /*
+ * This is the host address where
+ * rx_port_stats_ext_pfc_wd will be stored
+ */
+ uint64_t pfc_wd_stat_host_addr;
+} __rte_packed;
+
+/* hwrm_port_qstats_ext_pfc_wd_output (size:128b/16B) */
+struct hwrm_port_qstats_ext_pfc_wd_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The size of rx_port_stats_ext_pfc_wd
+ * statistics block in bytes.
+ */
+ uint16_t pfc_wd_stat_size;
+ uint8_t flags;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+ uint8_t unused_0[4];
+} __rte_packed;
/*************************
* hwrm_port_lpbk_qstats *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_lpbk_qstats_output (size:768b/96B) */
struct hwrm_port_lpbk_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
+
+/************************
+ * hwrm_port_ecn_qstats *
+ ************************/
+
+
+/* hwrm_port_ecn_qstats_input (size:192b/24B) */
+struct hwrm_port_ecn_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port that is being queried. Unused if NIC is in
+ * multi-host mode.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_ecn_qstats_output (size:384b/48B) */
+struct hwrm_port_ecn_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of packets marked in CoS queue 0. */
+ uint32_t mark_cnt_cos0;
+ /* Number of packets marked in CoS queue 1. */
+ uint32_t mark_cnt_cos1;
+ /* Number of packets marked in CoS queue 2. */
+ uint32_t mark_cnt_cos2;
+ /* Number of packets marked in CoS queue 3. */
+ uint32_t mark_cnt_cos3;
+ /* Number of packets marked in CoS queue 4. */
+ uint32_t mark_cnt_cos4;
+ /* Number of packets marked in CoS queue 5. */
+ uint32_t mark_cnt_cos5;
+ /* Number of packets marked in CoS queue 6. */
+ uint32_t mark_cnt_cos6;
+ /* Number of packets marked in CoS queue 7. */
+ uint32_t mark_cnt_cos7;
+ /*
+ * Bitmask that indicates which CoS queues have ECN marking enabled.
+ * Bit i corresponds to CoS queue i.
+ */
+ uint8_t mark_en;
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
/***********************
* hwrm_port_clr_stats *
*/
#define HWRM_PORT_CLR_STATS_INPUT_FLAGS_ROCE_COUNTERS UINT32_C(0x1)
uint8_t unused_0[5];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_clr_stats_output (size:128b/16B) */
struct hwrm_port_clr_stats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_port_phy_qcaps *
/* Port ID of port that is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_qcaps_output (size:192b/24B) */
struct hwrm_port_phy_qcaps_output {
*/
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \
UINT32_C(0x2)
+ /*
+ * If set to 1, then this field indicates that the
+ * PHY is capable of supporting loopback in autoneg mode.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_AUTONEG_LPBK_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * Indicates if the configuration of shared PHY settings is supported.
+ * In cases where a physical port is shared by multiple functions
+ * (e.g. NPAR, multihost, etc), the configuration of PHY
+ * settings may not be allowed. Callers to HWRM_PORT_PHY_CFG will
+ * get an HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error in this case.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_SHARED_PHY_CFG_SUPPORTED \
+ UINT32_C(0x8)
/*
* Reserved field. The HWRM shall set this field to 0.
* An HWRM client shall ignore this field.
*/
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \
- UINT32_C(0xfc)
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 2
+ UINT32_C(0xf0)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 4
/* Number of front panel ports for this device. */
uint8_t port_cnt;
/* Not supported or unknown */
#define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \
UINT32_C(0xff000000)
#define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_port_phy_mdio_write *
uint8_t cl45_mdio;
/* */
uint8_t unused_1[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_mdio_write_output (size:128b/16B) */
struct hwrm_port_phy_mdio_write_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_port_phy_mdio_read *
uint8_t cl45_mdio;
/* */
uint8_t unused_1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_mdio_read_output (size:128b/16B) */
struct hwrm_port_phy_mdio_read_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_port_led_cfg *
uint8_t led3_group_id;
/* Reserved field. */
uint8_t rsvd3;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_led_cfg_output (size:128b/16B) */
struct hwrm_port_led_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_port_led_qcfg *
/* Port ID of port whose LED configuration is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_led_qcfg_output (size:448b/56B) */
struct hwrm_port_led_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_port_led_qcaps *
/* Port ID of port whose LED configuration is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_led_qcaps_output (size:384b/48B) */
struct hwrm_port_led_qcaps_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_port_prbs_test *
* bit1 = lane1 ..bit31 = lane31
*/
uint32_t rx_lane_map;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_prbs_test_output (size:128b/16B) */
struct hwrm_port_prbs_test_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
+
+/**********************
+ * hwrm_port_dsc_dump *
+ **********************/
+
+
+/* hwrm_port_dsc_dump_input (size:320b/40B) */
+struct hwrm_port_dsc_dump_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Host address where response diagnostic data is returned. */
+ uint64_t resp_data_addr;
+ /*
+ * Size of the buffer pointed to by resp_data_addr. The firmware
+ * may use this entire buffer or less than the entire buffer, but
+ * never more.
+ */
+ uint16_t data_len;
+ uint16_t unused_0;
+ uint32_t unused_1;
+ /* Port ID of port where dsc dump to be collected. */
+ uint16_t port_id;
+ /* Diag level specified by the user */
+ uint16_t diag_level;
+ /* SRDS_DIAG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE \
+ UINT32_C(0x0)
+ /* SRDS_DIAG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_CORE \
+ UINT32_C(0x1)
+ /* SRDS_DIAG_EVENT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT \
+ UINT32_C(0x2)
+ /* SRDS_DIAG_EYE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EYE \
+ UINT32_C(0x3)
+ /* SRDS_DIAG_REG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_CORE \
+ UINT32_C(0x4)
+ /* SRDS_DIAG_REG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_LANE \
+ UINT32_C(0x5)
+ /* SRDS_DIAG_UC_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_CORE \
+ UINT32_C(0x6)
+ /* SRDS_DIAG_UC_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_LANE \
+ UINT32_C(0x7)
+ /* SRDS_DIAG_LANE_DEBUG */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE_DEBUG \
+ UINT32_C(0x8)
+ /* SRDS_DIAG_BER_VERT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_VERT \
+ UINT32_C(0x9)
+ /* SRDS_DIAG_BER_HORZ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_HORZ \
+ UINT32_C(0xa)
+ /* SRDS_DIAG_EVENT_SAFE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT_SAFE \
+ UINT32_C(0xb)
+ /* SRDS_DIAG_TIMESTAMP */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP \
+ UINT32_C(0xc)
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_LAST \
+ HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP
+ /*
+ * This field is a lane number
+ * on which to collect the dsc dump
+ */
+ uint16_t lane_number;
+ /*
+ * Configuration bits.
+ * Use enable bit to start dsc dump or retrieve dump
+ */
+ uint16_t dsc_dump_config;
+ /*
+ * Set 0 to retrieve the dsc dump
+ * Set 1 to start the dsc dump
+ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DSC_DUMP_CONFIG_START_RETRIEVE \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/* hwrm_port_dsc_dump_output (size:128b/16B) */
+struct hwrm_port_dsc_dump_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Total length of stored data. */
+ uint16_t total_data_len;
+ uint16_t unused_0;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_port_sfp_sideband_cfg *
+ ******************************/
+
+
+/* hwrm_port_sfp_sideband_cfg_input (size:256b/32B) */
+struct hwrm_port_sfp_sideband_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+ /*
+ * This bitfield is used to specify which bits from the 'flags'
+ * fields are being configured by the caller.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for rs0 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS0 \
+ UINT32_C(0x1)
+ /* This bit must be '1' for rs1 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS1 \
+ UINT32_C(0x2)
+ /* This bit must be '1' for tx_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for mod_sel to be configured.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_MOD_SEL \
+ UINT32_C(0x8)
+ /* This bit must be '1' for reset_l to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RESET_L \
+ UINT32_C(0x10)
+ /* This bit must be '1' for lp_mode to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_LP_MODE \
+ UINT32_C(0x20)
+ /* This bit must be '1' for pwr_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_PWR_DIS \
+ UINT32_C(0x40)
+ /*
+ * Only bits that have corresponding bits in the 'enables'
+ * bitfield are processed by the firmware, all other bits
+ * of 'flags' are ignored.
+ */
+ uint32_t flags;
+ /*
+ * This bit along with rs1 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS0 \
+ UINT32_C(0x1)
+ /*
+ * This bit along with rs0 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS1 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set,
+ * module PHY registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', this module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_MOD_SEL \
+ UINT32_C(0x8)
+ /*
+ * If reset_l is set to 0, Module will be taken out of reset
+ * and other signals will be set to their requested state once
+ * the module is out of reset.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RESET_L \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', the module will be configured
+ * in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_LP_MODE \
+ UINT32_C(0x20)
+ /* When this bit is set to '1', the module will be powered down. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_PWR_DIS \
+ UINT32_C(0x40)
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_cfg_output (size:128b/16B) */
+struct hwrm_port_sfp_sideband_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_port_sfp_sideband_qcfg *
+ *******************************/
+
+
+/* hwrm_port_sfp_sideband_qcfg_input (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_qcfg_output (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bitmask indicating which sideband signals are valid.
+ * This is based on the board and nvm cfg that is present on the board.
+ */
+ uint32_t supported_mask;
+ uint32_t sideband_signals;
+ /* When this bit is set to '1', the Module is absent. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_ABS \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', there is no valid signal on RX.
+ * This signal is a filtered version of Signal Detect.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RX_LOS \
+ UINT32_C(0x2)
+ /*
+ * This bit along with rs1 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS0 \
+ UINT32_C(0x4)
+ /*
+ * This bit along with rs0 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS1 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set, module PHY
+ * registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_DIS \
+ UINT32_C(0x10)
+ /* When this bit is set to '1', tx_fault is set. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_FAULT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_SEL \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '0', the module is held in reset.
+ * if reset_l is set to 1,first module is taken out of reset
+ * and other signals will be set to their requested state.
+ * Valid only on QSFP modules.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RESET_L \
+ UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', the module is in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_LP_MODE \
+ UINT32_C(0x100)
+ /* When this bit is set to '1', module is in power down state. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_PWR_DIS \
+ UINT32_C(0x200)
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_acquire *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_acquire_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_acquire_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS access.
+ * Any value from 0x10 to 0xFFFF can be used.
+ * Client should make sure that the returned client_id
+ * in response matches the client_id in request.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ /*
+ * Timeout in milli seconds, MDIO BUS will be released automatically
+ * after this time, if another mdio acquire command is not received
+ * within the timeout window from the same client.
+ * A 0xFFFF will hold the bus until this bus is released.
+ */
+ uint16_t mdio_bus_timeout;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_acquire_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_acquire_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /*
+ * client_id of the module holding the BUS.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_release *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_release_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_release_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS release.
+ * A client should not release any other clients BUS.
+ */
+ uint16_t client_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_release_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_release_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /* The BUS is released if client_id matches the client_id in request. */
+ uint16_t clients_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
/***********************
* hwrm_queue_qportcfg *
HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
/*
* Port ID of port for which the queue configuration is being
- * queried. This field is only required when sent by IPC.
+ * queried. This field is only required when sent by IPC.
*/
uint16_t port_id;
/*
#define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \
HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_qportcfg_output (size:256b/32B) */
struct hwrm_queue_qportcfg_output {
HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_queue_qcfg *
HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX
/* Queue ID of the queue. */
uint32_t queue_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_qcfg_output (size:128b/16B) */
struct hwrm_queue_qcfg_output {
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * This value is a the estimate packet length used in the
+ * This value is the estimate packet length used in the
* TX arbiter.
*/
uint32_t queue_len;
uint8_t unused_0;
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_queue_cfg *
#define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LAST \
HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_cfg_output (size:128b/16B) */
struct hwrm_queue_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************
* hwrm_queue_pfcenable_qcfg *
*/
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pfcenable_qcfg_output (size:128b/16B) */
struct hwrm_queue_pfcenable_qcfg_output {
/* If set to 1, then PFC is enabled on PRI 7. */
#define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_ENABLED \
UINT32_C(0x80)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI0. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x100)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI1. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x200)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI2. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x400)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI3. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x800)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI4. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x1000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI5. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x2000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI6. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x4000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI7. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x8000)
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_queue_pfcenable_cfg *
/* If set to 1, then PFC is requested to be enabled on PRI 1. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \
UINT32_C(0x2)
- /* If set to 1, then PFC is requested to be enabled on PRI 2. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 2. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \
UINT32_C(0x4)
- /* If set to 1, then PFC is requested to be enabled on PRI 3. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 3. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \
UINT32_C(0x8)
- /* If set to 1, then PFC is requested to be enabled on PRI 4. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 4. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \
UINT32_C(0x10)
- /* If set to 1, then PFC is requested to be enabled on PRI 5. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 5. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \
UINT32_C(0x20)
- /* If set to 1, then PFC is requested to be enabled on PRI 6. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 6. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \
UINT32_C(0x40)
- /* If set to 1, then PFC is requested to be enabled on PRI 7. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 7. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \
UINT32_C(0x80)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI0. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x100)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI1. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x200)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI2. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x400)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI3. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x800)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI4. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x1000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI5. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x2000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI6. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x4000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI7. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x8000)
/*
* Port ID of port for which the table is being configured.
* The HWRM needs to check whether this function is allowed
*/
uint16_t port_id;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pfcenable_cfg_output (size:128b/16B) */
struct hwrm_queue_pfcenable_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_queue_pri2cos_qcfg *
HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX
/*
* When this bit is set to '0', the query is
- * for VLAN PRI field in tunnel headers.
+ * for PRI from tunnel headers.
* When this bit is set to '1', the query is
- * for VLAN PRI field in inner packet headers.
+ * for PRI from inner packet headers.
*/
#define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2)
/*
*/
uint8_t port_id;
uint8_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pri2cos_qcfg_output (size:192b/24B) */
struct hwrm_queue_pri2cos_qcfg_output {
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * CoS Queue assigned to priority 0. This value can only
+ * CoS Queue assigned to priority 0. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri0_cos_queue_id;
/*
- * CoS Queue assigned to priority 1. This value can only
+ * CoS Queue assigned to priority 1. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri1_cos_queue_id;
/*
- * CoS Queue assigned to priority 2 This value can only
+ * CoS Queue assigned to priority 2. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri2_cos_queue_id;
/*
- * CoS Queue assigned to priority 3. This value can only
+ * CoS Queue assigned to priority 3. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri3_cos_queue_id;
/*
- * CoS Queue assigned to priority 4. This value can only
+ * CoS Queue assigned to priority 4. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri4_cos_queue_id;
/*
- * CoS Queue assigned to priority 5. This value can only
+ * CoS Queue assigned to priority 5. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri5_cos_queue_id;
/*
- * CoS Queue assigned to priority 6. This value can only
+ * CoS Queue assigned to priority 6. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri6_cos_queue_id;
/*
- * CoS Queue assigned to priority 7. This value can only
+ * CoS Queue assigned to priority 7. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
uint8_t unused_0[6];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_queue_pri2cos_cfg *
HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR
/*
* When this bit is set to '0', the mapping is requested
- * for VLAN PRI field in tunnel headers.
+ * for PRI from tunnel headers.
* When this bit is set to '1', the mapping is requested
- * for VLAN PRI field in inner packet headers.
+ * for PRI from inner packet headers.
*/
#define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4)
uint32_t enables;
*/
uint8_t port_id;
/*
- * CoS Queue assigned to priority 0. This value can only
+ * CoS Queue assigned to priority 0. This value can only
* be changed before traffic has started.
*/
uint8_t pri0_cos_queue_id;
/*
- * CoS Queue assigned to priority 1. This value can only
+ * CoS Queue assigned to priority 1. This value can only
* be changed before traffic has started.
*/
uint8_t pri1_cos_queue_id;
*/
uint8_t pri2_cos_queue_id;
/*
- * CoS Queue assigned to priority 3. This value can only
+ * CoS Queue assigned to priority 3. This value can only
* be changed before traffic has started.
*/
uint8_t pri3_cos_queue_id;
/*
- * CoS Queue assigned to priority 4. This value can only
+ * CoS Queue assigned to priority 4. This value can only
* be changed before traffic has started.
*/
uint8_t pri4_cos_queue_id;
/*
- * CoS Queue assigned to priority 5. This value can only
+ * CoS Queue assigned to priority 5. This value can only
* be changed before traffic has started.
*/
uint8_t pri5_cos_queue_id;
/*
- * CoS Queue assigned to priority 6. This value can only
+ * CoS Queue assigned to priority 6. This value can only
* be changed before traffic has started.
*/
uint8_t pri6_cos_queue_id;
/*
- * CoS Queue assigned to priority 7. This value can only
+ * CoS Queue assigned to priority 7. This value can only
* be changed before traffic has started.
*/
uint8_t pri7_cos_queue_id;
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pri2cos_cfg_output (size:128b/16B) */
struct hwrm_queue_pri2cos_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_queue_cos2bw_qcfg *
*/
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_cos2bw_qcfg_output (size:896b/112B) */
struct hwrm_queue_cos2bw_qcfg_output {
uint8_t unused_2[4];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_queue_cos2bw_cfg *
/* Strict Priority */
#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_SP \
UINT32_C(0x0)
- /* Enhanced Transmission Selection */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS \
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id6_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id6_bw_weight;
+ /* ID of CoS Queue 7. */
+ uint8_t queue_id7;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id7_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id7_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id7_bw_weight;
+ uint8_t unused_1[5];
+} __rte_packed;
+
+/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */
+struct hwrm_queue_cos2bw_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_dscp_qcaps *
+ *************************/
+
+
+/* hwrm_queue_dscp_qcaps_input (size:192b/24B) */
+struct hwrm_queue_dscp_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_dscp_qcaps_output (size:128b/16B) */
+struct hwrm_queue_dscp_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The number of bits provided by the hardware for the DSCP value. */
+ uint8_t num_dscp_bits;
+ uint8_t unused_0;
+ /* Max number of DSCP-MASK-PRI entries supported. */
+ uint16_t max_entries;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_queue_dscp2pri_qcfg *
+ ****************************/
+
+
+/* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */
+struct hwrm_queue_dscp2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the 24-bits DSCP-MASK-PRI
+ * tuple(s) will be copied to.
+ */
+ uint64_t dest_data_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0;
+ /* Size of the buffer pointed to by dest_data_addr. */
+ uint16_t dest_data_buffer_size;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * A count of the number of DSCP-MASK-PRI tuple(s) pointed to
+ * by the dest_data_addr.
+ */
+ uint16_t entry_cnt;
+ /*
+ * This is the default PRI which un-initialized DSCP values are
+ * mapped to.
+ */
+ uint8_t default_pri;
+ uint8_t unused_0[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_queue_dscp2pri_cfg *
+ ***************************/
+
+
+/* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */
+struct hwrm_queue_dscp2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the 24-bits DSCP-MASK-PRI tuple
+ * will be copied from.
+ */
+ uint64_t src_data_addr;
+ uint32_t flags;
+ /* use_hw_default_pri is 1 b */
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \
+ UINT32_C(0x1)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the default_pri field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \
+ UINT32_C(0x1)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ /*
+ * This is the default PRI which un-initialized DSCP values will be
+ * mapped to.
+ */
+ uint8_t default_pri;
+ /*
+ * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed
+ * to by src_data_addr.
+ */
+ uint16_t entry_cnt;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_mpls_qcaps *
+ *************************/
+
+
+/* hwrm_queue_mpls_qcaps_input (size:192b/24B) */
+struct hwrm_queue_mpls_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_mpls_qcaps_output (size:128b/16B) */
+struct hwrm_queue_mpls_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_mplstc2pri_cfg command.
+ *
+ * Each bit represents a specific pri where bit 0 represents
+ * pri 0 and bit 7 represents pri 7.
+ * # A value of 0 indicates that the pri is not configurable
+ * by the hwrm_queue_mplstc2pri_cfg command.
+ * # A value of 1 indicates that the pri is configurable.
+ * # A hwrm_queue_mplstc2pri_cfg command shall return error when
+ * trying to configure a pri that is not configurable.
+ */
+ uint8_t queue_mplstc2pri_cfg_allowed;
+ /*
+ * This is the default PRI which un-initialized MPLS values will be
+ * mapped to.
+ */
+ uint8_t hw_default_pri;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_queue_mplstc2pri_qcfg *
+ ******************************/
+
+
+/* hwrm_queue_mplstc2pri_qcfg_input (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_qcfg_output (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 0.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 1.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 2.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 3.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 4.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 5.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 6.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 7.
+ */
+ uint8_t tc7_pri_queue_id;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************
+ * hwrm_queue_mplstc2pri_cfg *
+ *****************************/
+
+
+/* hwrm_queue_mplstc2pri_cfg_input (size:256b/32B) */
+struct hwrm_queue_mplstc2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the mplstc0_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC0_PRI_QUEUE_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the mplstc1_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC1_PRI_QUEUE_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the mplstc2_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC2_PRI_QUEUE_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the mplstc3_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC3_PRI_QUEUE_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mplstc4_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC4_PRI_QUEUE_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the mplstc5_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC5_PRI_QUEUE_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the mplstc6_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC6_PRI_QUEUE_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the mplstc7_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC7_PRI_QUEUE_ID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP)to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[3];
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2 This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc7_pri_queue_id;
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_mplstc2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_vnic_alloc *
+ *******************/
+
+
+/* hwrm_vnic_alloc_input (size:192b/24B) */
+struct hwrm_vnic_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', this VNIC is requested to
+ * be the default VNIC for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_alloc_output (size:128b/16B) */
+struct hwrm_vnic_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_free *
+ ******************/
+
+
+/* hwrm_vnic_free_input (size:192b/24B) */
+struct hwrm_vnic_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_free_output (size:128b/16B) */
+struct hwrm_vnic_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_vnic_cfg *
+ *****************/
+
+
+/* hwrm_vnic_cfg_input (size:384b/48B) */
+struct hwrm_vnic_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is requested to
+ * be the default VNIC for the function.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * strip VLAN in the RX path.
+ * If set to '0', then VLAN stripping is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * buffer receive packets in the hardware until the host
+ * posts new receive buffers.
+ * If set to '0', then bd_stall is being configured to be
+ * disabled on this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic.
+ * If set to '0', then this VNIC is not configured to be
+ * operating in dual VNIC mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is requested to
+ * be configured to receive only RoCE traffic.
+ * If this flag is set to '0', then this flag shall be
+ * ignored by the HWRM.
+ * If roce_dual_vnic_mode flag is set to '1'
+ * or roce_mirroring_capable_vnic_mode flag to 1,
+ * then the HWRM client shall not set this flag to '1'.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+ UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where
+ * exact match is used to direct packets to a VNIC with one
+ * destination ring group only, there is no need to configure
+ * RSS indirection table for that VNIC as only one destination
+ * ring group is used.
+ *
+ * This flag is used to enable a mode where
+ * RSS is enabled in the VNIC using a RSS context
+ * for computing RSS hash but the RSS indirection table is
+ * not configured using hwrm_vnic_rss_cfg.
+ *
+ * If this mode is enabled, then the driver should not program
+ * RSS indirection table for the RSS context that is used for
+ * computing RSS hash only.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic, but forward only the
+ * RoCE traffic further. Also, RoCE traffic can be mirrored to
+ * L2 driver.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dflt_ring_grp field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the rss_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cos_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the lb_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mru field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the default_rx_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the default_cmpl_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the queue_id field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_QUEUE_ID \
+ UINT32_C(0x80)
+ /* This bit must be '1' for the rx_csum_v2_mode field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RX_CSUM_V2_MODE \
+ UINT32_C(0x100)
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+ /*
+ * Default Completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules and if
+ * there is no COS rule.
+ */
+ uint16_t dflt_ring_grp;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for load balancing rule/table structure.
+ * 0xFF... (All Fs) if there is no LB rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * The maximum receive unit of the vnic.
+ * Each vnic is associated with a function.
+ * The vnic mru value overwrites the mru setting of the
+ * associated function.
+ * The HWRM shall make sure that vnic mru does not exceed
+ * the mru of the port the function is associated with.
+ */
+ uint16_t mru;
+ /*
+ * Default Rx ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ * The aggregation ring associated with the Rx ring is
+ * implied based on the Rx ring specified when the
+ * aggregation ring was allocated.
+ */
+ uint16_t default_rx_ring_id;
+ /*
+ * Default completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ */
+ uint16_t default_cmpl_ring_id;
+ /*
+ * When specified, only incoming packets classified to the specified CoS
+ * queue ID will be arriving on this VNIC. Packet priority to CoS mapping
+ * rules can be specified using HWRM_QUEUE_PRI2COS_CFG. In this mode,
+ * ntuple filters with VNIC destination specified are invalid since they
+ * conflict with the the CoS to VNIC steering rules in this mode.
+ *
+ * If this field is not specified, packet to VNIC steering will be
+ * subject to the standard L2 filter rules and any additional ntuple
+ * filter rules with destination VNIC specified.
+ */
+ uint16_t queue_id;
+ /*
+ * If the device supports the RX V2 and RX TPA start V2 completion
+ * records as indicated by the HWRM_VNIC_QCAPS command, this field is
+ * used to specify the two RX checksum modes supported by these
+ * completion records.
+ */
+ uint8_t rx_csum_v2_mode;
+ /*
+ * When configured with this checksum mode, the number of header
+ * groups in the delivered packet with a valid IP checksum and
+ * the number of header groups in the delivered packet with a valid
+ * L4 checksum are reported. Valid checksums are counted from the
+ * outermost header group to the innermost header group, stopping at
+ * the first error. This is the default checksum mode supported if
+ * the driver doesn't explicitly configure the RX checksum mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_DEFAULT UINT32_C(0x0)
+ /*
+ * When configured with this checksum mode, the checksum status is
+ * reported using 'all ok' mode. In the RX completion record, one
+ * bit indicates if the IP checksum is valid for all the parsed
+ * header groups with an IP checksum. Another bit indicates if the
+ * L4 checksum is valid for all the parsed header groups with an L4
+ * checksum. The number of header groups that were parsed by the
+ * chip and passed in the delivered packet is also reported.
+ */
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_ALL_OK UINT32_C(0x1)
+ /*
+ * Any rx_csum_v2_mode value larger than or equal to this is not
+ * valid
+ */
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_MAX UINT32_C(0x2)
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_LAST \
+ HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_MAX
+ uint8_t unused0[5];
+} __rte_packed;
+
+/* hwrm_vnic_cfg_output (size:128b/16B) */
+struct hwrm_vnic_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_qcfg *
+ ******************/
+
+
+/* hwrm_vnic_qcfg_input (size:256b/32B) */
+struct hwrm_vnic_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vf_id_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ /* ID of Virtual Function whose VNIC resource is being queried. */
+ uint16_t vf_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_qcfg_output (size:256b/32B) */
+struct hwrm_vnic_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Default Completion ring for the VNIC. */
+ uint16_t dflt_ring_grp;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for load balancing rule/table structure.
+ * 0xFF... (All Fs) if there is no LB rule.
+ */
+ uint16_t lb_rule;
+ /* The maximum receive unit of the vnic. */
+ uint16_t mru;
+ uint8_t unused_0[2];
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is the default VNIC for
+ * the function.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * strip VLAN in the RX path.
+ * If set to '0', then VLAN stripping is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * buffer receive packets in the hardware until the host
+ * posts new receive buffers.
+ * If set to '0', then bd_stall is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * receive both RoCE and non-RoCE traffic.
+ * If set to '0', then this VNIC is not configured to
+ * operate in dual VNIC mode.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is configured to
+ * receive only RoCE traffic.
+ * When this flag is set to '0', the VNIC is not configured
+ * to receive only RoCE traffic.
+ * If roce_dual_vnic_mode flag and this flag both are set
+ * to '1', then it is an invalid configuration of the
+ * VNIC. The HWRM should not allow that type of
+ * mis-configuration by HWRM clients.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+ UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where
+ * exact match is used to direct packets to a VNIC with one
+ * destination ring group only, there is no need to configure
+ * RSS indirection table for that VNIC as only one destination
+ * ring group is used.
+ *
+ * When this bit is set to '1', then the VNIC is enabled in a
+ * mode where RSS is enabled in the VNIC using a RSS context
+ * for computing RSS hash but the RSS indirection table is
+ * not configured.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * receive both RoCE and non-RoCE traffic, but forward only
+ * RoCE traffic further. Also RoCE traffic can be mirrored to
+ * L2 driver.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
+ /*
+ * When returned with a valid CoS Queue id, the CoS Queue/VNIC association
+ * is valid. Otherwise it will return 0xFFFF to indicate no VNIC/CoS
+ * queue association.
+ */
+ uint16_t queue_id;
+ /*
+ * If the device supports the RX V2 and RX TPA start V2 completion
+ * records as indicated by the HWRM_VNIC_QCAPS command, this field is
+ * used to specify the current RX checksum mode configured for all the
+ * RX rings of a VNIC.
+ */
+ uint8_t rx_csum_v2_mode;
+ /*
+ * This value indicates that the VNIC is configured to use the
+ * default RX checksum mode for all the rings associated with this
+ * VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_DEFAULT UINT32_C(0x0)
+ /*
+ * This value indicates that the VNIC is configured to use the RX
+ * checksum ‘all_ok’ mode for all the rings associated with this
+ * VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_ALL_OK UINT32_C(0x1)
+ /*
+ * Any rx_csum_v2_mode value larger than or equal to this is not
+ * valid
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_MAX UINT32_C(0x2)
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_LAST \
+ HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_MAX
+ uint8_t unused_1[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_vnic_qcaps *
+ *******************/
+
+
+/* hwrm_vnic_qcaps_input (size:192b/24B) */
+struct hwrm_vnic_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_qcaps_output (size:192b/24B) */
+struct hwrm_vnic_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The maximum receive unit that is settable on a vnic. */
+ uint16_t mru;
+ uint8_t unused_0[2];
+ uint32_t flags;
+ /* Unused. */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the capability of stripping VLAN in
+ * the RX path is supported on VNIC(s).
+ * If set to '0', then VLAN stripping capability is
+ * not supported on VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the capability to buffer receive
+ * packets in the hardware until the host posts new receive buffers
+ * is supported on VNIC(s).
+ * If set to '0', then bd_stall capability is not supported
+ * on VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the capability to
+ * receive both RoCE and non-RoCE traffic on VNIC(s) is
+ * supported.
+ * If set to '0', then the capability to receive
+ * both RoCE and non-RoCE traffic on VNIC(s) is
+ * not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', the capability to configure
+ * a VNIC to receive only RoCE traffic is supported.
+ * When this flag is set to '0', the VNIC capability to
+ * configure to receive only RoCE traffic is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', then the capability to enable
+ * a VNIC in a mode where RSS context without configuring
+ * RSS indirection table is supported (for RSS hash computation).
+ * When this bit is set to '0', then a VNIC can not be configured
+ * with a mode to enable RSS context without configuring RSS
+ * indirection table.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the capability to
+ * mirror the the RoCE traffic is supported.
+ * If set to '0', then the capability to mirror the
+ * RoCE traffic is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the outermost RSS hashing capability
+ * is supported. If set to '0', then the outermost RSS hashing
+ * capability is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that firmware supports the
+ * ability to steer incoming packets from one CoS queue to one
+ * VNIC. This optional feature can then be enabled
+ * using HWRM_VNIC_CFG on any VNIC. This feature is only
+ * available when NVM option “enable_cos_classfication” is set
+ * to 1. If set to '0', firmware does not support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_COS_ASSIGNMENT_CAP \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that HW and firmware supports
+ * the use of RX V2 and RX TPA start V2 completion records for all
+ * the RX rings of a VNIC. Once set, this feature is mandatory to
+ * be used for the RX rings of the VNIC. Additionally, two new RX
+ * checksum features supported by these ompletion records can be
+ * configured using the HWRM_VNIC_CFG on a VNIC. If set to '0', the
+ * HW and the firmware does not support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RX_CMPL_V2_CAP \
+ UINT32_C(0x200)
+ /*
+ * This field advertises the maximum concurrent TPA aggregations
+ * supported by the VNIC on new devices that support TPA v2.
+ * '0' means that TPA v2 is not supported.
+ */
+ uint16_t max_aggs_supported;
+ uint8_t unused_1[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_vnic_tpa_cfg *
+ *********************/
+
+
+/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */
+struct hwrm_vnic_tpa_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) of
+ * non-tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) of
+ * tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) according
+ * to Windows Receive Segment Coalescing (RSC) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) according
+ * to Linux Generic Receive Offload (GRO) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for TCP
+ * packets with IP ECN set to non-zero.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * GRE tunneled TCP packets only if all packets have the
+ * same GRE sequence.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * TCP/IPv4 packets with consecutively increasing IPIDs.
+ * In other words, the last packet that is being
+ * aggregated to an already existing aggregation context
+ * shall have IPID 1 more than the IPID of the last packet
+ * that was aggregated in that aggregation context.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * TCP packets with the same TTL (IPv4) or Hop limit (IPv6)
+ * value.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall DMA payload data using GRO rules.
+ * When this bit is '0', the VNIC shall DMA payload data
+ * using the more efficient LRO rules of filling all
+ * aggregation buffers.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_PACK_AS_GRO \
+ UINT32_C(0x100)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the max_agg_segs field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the max_aggs field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the max_agg_timer field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
+ /* deprecated bit. Do not use!!! */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+ /*
+ * This is the maximum number of TCP segments that can
+ * be aggregated (unit is Log2). Max value is 31. On new
+ * devices supporting TPA v2, the unit is multiples of 4 and
+ * valid values are > 0 and <= 63.
+ */
+ uint16_t max_agg_segs;
+ /* 1 segment */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
+ /* 2 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
+ /* 4 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
+ /* 8 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
+ /* Any segment size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \
+ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX
+ /*
+ * This is the maximum number of aggregations this VNIC is
+ * allowed (unit is Log2). Max value is 7. On new devices
+ * supporting TPA v2, this is in unit of 1 and must be > 0
+ * and <= max_aggs_supported in the hwrm_vnic_qcaps response
+ * to enable TPA v2.
+ */
+ uint16_t max_aggs;
+ /* 1 aggregation */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
+ /* 2 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
+ /* 4 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
+ /* 8 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
+ /* 16 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
+ /* Any aggregation size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \
+ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX
+ uint8_t unused_0[2];
+ /*
+ * This is the maximum amount of time allowed for
+ * an aggregation context to complete after it was initiated.
+ */
+ uint32_t max_agg_timer;
+ /*
+ * This is the minimum amount of payload length required to
+ * start an aggregation context. This field is deprecated and
+ * should be set to 0. The minimum length is set by firmware
+ * and can be queried using hwrm_vnic_tpa_qcfg.
+ */
+ uint32_t min_agg_len;
+} __rte_packed;
+
+/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */
+struct hwrm_vnic_tpa_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_vnic_rss_cfg *
+ *********************/
+
+
+/* hwrm_vnic_rss_cfg_input (size:384b/48B) */
+struct hwrm_vnic_rss_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ /* VNIC ID of VNIC associated with RSS table being configured. */
+ uint16_t vnic_id;
+ /*
+ * Specifies which VNIC ring table pair to configure.
+ * Valid values range from 0 to 7.
+ */
+ uint8_t ring_table_pair_index;
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ /* This is the address for rss ring group table */
+ uint64_t ring_grp_tbl_addr;
+ /* This is the address for rss hash key table */
+ uint64_t hash_key_tbl_addr;
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+ uint8_t unused_1[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_cfg_output (size:128b/16B) */
+struct hwrm_vnic_rss_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_vnic_rss_cfg_cmd_err (size:64b/8B) */
+struct hwrm_vnic_rss_cfg_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /*
+ * Unable to change global RSS mode to outer due to all active
+ * interfaces are not ready to support outer RSS hashing.
+ */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY \
+ UINT32_C(0x1)
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_LAST \
+ HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/**********************
+ * hwrm_vnic_rss_qcfg *
+ **********************/
+
+
+/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_rss_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */
+struct hwrm_vnic_rss_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint8_t unused_0[4];
+ /* This is the value of rss hash key */
+ uint32_t hash_key[10];
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ uint8_t unused_1[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_vnic_plcmodes_cfg *
+ **************************/
+
+
+/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */
+struct hwrm_vnic_plcmodes_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * use regular placement algorithm.
+ * By default, the regular placement algorithm shall be
+ * enabled on the VNIC.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * use the jumbo placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for IPv4 packets according
+ * to the following rules:
+ * # If the packet is identified as TCP/IPv4, then the
+ * packet is split at the beginning of the TCP payload.
+ * # If the packet is identified as UDP/IPv4, then the
+ * packet is split at the beginning of UDP payload.
+ * # If the packet is identified as non-TCP and non-UDP
+ * IPv4 packet, then the packet is split at the beginning
+ * of the upper layer protocol header carried in the IPv4
+ * packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for IPv6 packets according
+ * to the following rules:
+ * # If the packet is identified as TCP/IPv6, then the
+ * packet is split at the beginning of the TCP payload.
+ * # If the packet is identified as UDP/IPv6, then the
+ * packet is split at the beginning of UDP payload.
+ * # If the packet is identified as non-TCP and non-UDP
+ * IPv6 packet, then the packet is split at the beginning
+ * of the upper layer protocol header carried in the IPv6
+ * packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for FCoE packets at the
+ * beginning of FC payload.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for RoCE packets at the
+ * beginning of RoCE payload (after BTH/GRH headers).
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC shall be configured use the virtio
+ * placement algorithm. This feature can only be configured when
+ * proxy mode is supported on the function.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_VIRTIO_PLACEMENT \
+ UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the jumbo_thresh_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the hds_offset_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the hds_threshold_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the max_bds_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_MAX_BDS_VALID \
+ UINT32_C(0x8)
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ /*
+ * When jumbo placement algorithm is enabled, this value
+ * is used to determine the threshold for jumbo placement.
+ * Packets with length larger than this value will be
+ * placed according to the jumbo placement algorithm.
+ */
+ uint16_t jumbo_thresh;
+ /*
+ * This value is used to determine the offset into
+ * packet buffer where the split data (payload) will be
+ * placed according to one of HDS placement algorithm.
+ *
+ * The lengths of packet buffers provided for split data
+ * shall be larger than this value.
+ */
+ uint16_t hds_offset;
+ /*
+ * When one of the HDS placement algorithm is enabled, this
+ * value is used to determine the threshold for HDS
+ * placement.
+ * Packets with length larger than this value will be
+ * placed according to the HDS placement algorithm.
+ * This value shall be in multiple of 4 bytes.
+ */
+ uint16_t hds_threshold;
+ /*
+ * When virtio placement algorithm is enabled, this
+ * value is used to determine the the maximum number of BDs
+ * that can be used to place an Rx Packet.
+ * If an incoming packet does not fit in the buffers described
+ * by the max BDs, the packet will be dropped and an error
+ * will be reported in the completion. Valid values for this
+ * field are between 1 and 8. If the VNIC uses header-data-
+ * separation and/or TPA with buffer spanning enabled, valid
+ * values for this field are between 2 and 8.
+ * This feature can only be configured when proxy mode is
+ * supported on the function.
+ */
+ uint16_t max_bds;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */
+struct hwrm_vnic_plcmodes_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_vnic_plcmodes_qcfg *
+ ***************************/
+
+
+/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * use regular placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * use the jumbo placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for IPv4 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for IPv6 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for FCoE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for RoCE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to be the default VNIC of the requesting function.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the VNIC is configured to use the virtio
+ * placement algorithm. This feature can only be configured when
+ * proxy mode is supported on the function.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_VIRTIO_PLACEMENT \
+ UINT32_C(0x80)
+ /*
+ * When jumbo placement algorithm is enabled, this value
+ * is used to determine the threshold for jumbo placement.
+ * Packets with length larger than this value will be
+ * placed according to the jumbo placement algorithm.
+ */
+ uint16_t jumbo_thresh;
+ /*
+ * This value is used to determine the offset into
+ * packet buffer where the split data (payload) will be
+ * placed according to one of HDS placement algorithm.
+ *
+ * The lengths of packet buffers provided for split data
+ * shall be larger than this value.
+ */
+ uint16_t hds_offset;
+ /*
+ * When one of the HDS placement algorithm is enabled, this
+ * value is used to determine the threshold for HDS
+ * placement.
+ * Packets with length larger than this value will be
+ * placed according to the HDS placement algorithm.
+ * This value shall be in multiple of 4 bytes.
+ */
+ uint16_t hds_threshold;
+ /*
+ * When virtio placement algorithm is enabled, this
+ * value is used to determine the the maximum number of BDs
+ * that can be used to place an Rx Packet.
+ * If an incoming packet does not fit in the buffers described
+ * by the max BDs, the packet will be dropped and an error
+ * will be reported in the completion. Valid values for this
+ * field are between 1 and 8. If the VNIC uses header-data-
+ * separation and/or TPA with buffer spanning enabled, valid
+ * values for this field are between 2 and 8.
+ * This feature can only be configured when proxy mode is supported
+ * on the function
+ */
+ uint16_t max_bds;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_vnic_rss_cos_lb_ctx_alloc *
+ **********************************/
+
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************************
+ * hwrm_vnic_rss_cos_lb_ctx_free *
+ *********************************/
+
+
+/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_ring_alloc *
+ *******************/
+
+
+/* hwrm_ring_alloc_input (size:704b/88B) */
+struct hwrm_ring_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the ring_arb_cfg field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the max_bw_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the rx_ring_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the nq_ring_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the rx_buf_size field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the sq_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_SQ_ID \
+ UINT32_C(0x200)
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /* RX Aggregation Ring */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
+ /* Notification Queue */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ UINT32_C(0x5)
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ
+ uint8_t unused_0;
+ /* Ring allocation flags. */
+ uint16_t flags;
+ /*
+ * For Rx rings, the incoming packet data can be placed at either
+ * a 0B or 2B offset from the start of the Rx packet buffer. When
+ * '1', the received packet will be padded with 2B of zeros at the
+ * front of the packet. Note that this flag is only used for
+ * Rx rings and is ignored for all other rings included Rx
+ * Aggregation rings.
+ */
+ #define HWRM_RING_ALLOC_INPUT_FLAGS_RX_SOP_PAD UINT32_C(0x1)
+ /*
+ * This value is a pointer to the page table for the
+ * Ring.
+ */
+ uint64_t page_tbl_addr;
+ /* First Byte Offset of the first entry in the first page. */
+ uint32_t fbo;
+ /*
+ * Actual page size in 2^page_size. The supported range is increments
+ * in powers of 2 from 16 bytes to 1GB.
+ * - 4 = 16 B
+ * Page size is 16 B.
+ * - 12 = 4 KB
+ * Page size is 4 KB.
+ * - 13 = 8 KB
+ * Page size is 8 KB.
+ * - 16 = 64 KB
+ * Page size is 64 KB.
+ * - 21 = 2 MB
+ * Page size is 2 MB.
+ * - 22 = 4 MB
+ * Page size is 4 MB.
+ * - 30 = 1 GB
+ * Page size is 1 GB.
+ */
+ uint8_t page_size;
+ /*
+ * This value indicates the depth of page table.
+ * For this version of the specification, value other than 0 or
+ * 1 shall be considered as an invalid value.
+ * When the page_tbl_depth = 0, then it is treated as a
+ * special case with the following.
+ * 1. FBO and page size fields are not valid.
+ * 2. page_tbl_addr is the physical address of the first
+ * element of the ring.
+ */
+ uint8_t page_tbl_depth;
+ /* Used by a PF driver to associate a SQ with one of its TX rings. */
+ uint16_t sq_id;
+ /*
+ * Number of 16B units in the ring. Minimum size for
+ * a ring is 16 16B entries.
+ */
+ uint32_t length;
+ /*
+ * Logical ring number for the ring to be allocated.
+ * This value determines the position in the doorbell
+ * area where the update to the ring will be made.
+ *
+ * For completion rings, this value is also the MSI-X
+ * vector number for the function the completion ring is
+ * associated with.
+ */
+ uint16_t logical_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This value indicates what completion ring the TX ring
+ * is associated with.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This value indicates what CoS queue the TX ring
+ * is associated with.
+ */
+ uint16_t queue_id;
+ /*
+ * When allocating a Rx ring or Rx aggregation ring, this field
+ * specifies the size of the buffer descriptors posted to the ring.
+ */
+ uint16_t rx_buf_size;
+ /*
+ * When allocating an Rx aggregation ring, this field
+ * specifies the associated Rx ring ID.
+ */
+ uint16_t rx_ring_id;
+ /*
+ * When allocating a completion ring, this field
+ * specifies the associated NQ ring ID.
+ */
+ uint16_t nq_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This field is used to configure arbitration related
+ * parameters for a TX ring.
+ */
+ uint16_t ring_arb_cfg;
+ /* Arbitration policy used for the ring. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
+ /*
+ * Use strict priority for the TX ring.
+ * Priority value is specified in arb_policy_param
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
+ UINT32_C(0x1)
+ /*
+ * Use weighted fair queue arbitration for the TX ring.
+ * Weight is specified in arb_policy_param
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
+ UINT32_C(0x2)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
+ HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
+ /* Reserved field. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4
+ /*
+ * Arbitration policy specific parameter.
+ * # For strict priority arbitration policy, this field
+ * represents a priority value. If set to 0, then the priority
+ * is not specified and the HWRM is allowed to select
+ * any priority for this TX ring.
+ * # For weighted fair queue arbitration policy, this field
+ * represents a weight value. If set to 0, then the weight
+ * is not specified and the HWRM is allowed to select
+ * any weight for this TX ring.
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
+ uint16_t unused_3;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved3;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This input indicates what statistics context this ring
+ * should be associated with.
+ */
+ uint32_t stat_ctx_id;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved4;
+ /*
+ * This field is used only when ring_type is a TX ring
+ * to specify maximum BW allocated to the TX ring.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this ring inside the device.
+ */
+ uint32_t max_bw;
+ /* The bandwidth value. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
+ HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * This field is used only when ring_type is a Completion ring.
+ * This value indicates what interrupt mode should be used
+ * on this completion ring.
+ * Note: In the legacy interrupt mode, no more than 16
+ * completion rings are allowed.
+ */
+ uint8_t int_mode;
+ /* Legacy INTA */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
+ /* Reserved */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
+ /* MSI-X */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
+ /* No Interrupt - Polled mode */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
+ HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
+ uint8_t unused_4[3];
+ /*
+ * The cq_handle is specified when allocating a completion ring. For
+ * devices that support NQs, this cq_handle will be included in the
+ * NQE to specify which CQ should be read to retrieve the completion
+ * record.
+ */
+ uint64_t cq_handle;
+} __rte_packed;
+
+/* hwrm_ring_alloc_output (size:128b/16B) */
+struct hwrm_ring_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Physical number of ring allocated.
+ * This value shall be unique for a ring type.
+ */
+ uint16_t ring_id;
+ /* Logical number of ring allocated. */
+ uint16_t logical_ring_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_ring_free *
+ ******************/
+
+
+/* hwrm_ring_free_input (size:192b/24B) */
+struct hwrm_ring_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /* RX Aggregation Ring */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
+ /* Notification Queue */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5)
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
+ HWRM_RING_FREE_INPUT_RING_TYPE_NQ
+ uint8_t unused_0;
+ /* Physical number of ring allocated. */
+ uint16_t ring_id;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_free_output (size:128b/16B) */
+struct hwrm_ring_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_ring_reset *
+ *******************/
+
+
+/* hwrm_ring_reset_input (size:192b/24B) */
+struct hwrm_ring_reset_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /*
+ * Rx Ring Group. This is to reset rx and aggregation in an atomic
+ * operation. Completion ring associated with this ring group is
+ * not reset.
+ */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_RX_RING_GRP UINT32_C(0x6)
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \
+ HWRM_RING_RESET_INPUT_RING_TYPE_RX_RING_GRP
+ uint8_t unused_0;
+ /*
+ * Physical number of the ring. When ring type is rx_ring_grp, ring id
+ * actually refers to ring group id.
+ */
+ uint16_t ring_id;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_reset_output (size:128b/16B) */
+struct hwrm_ring_reset_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[4];
+ /* Position of consumer index after ring reset completes. */
+ uint8_t consumer_idx[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_ring_cfg *
+ *****************/
+
+
+/* hwrm_ring_cfg_input (size:256b/32B) */
+struct hwrm_ring_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* TX Ring (TR) */
+ #define HWRM_RING_CFG_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_CFG_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ #define HWRM_RING_CFG_INPUT_RING_TYPE_LAST \
+ HWRM_RING_CFG_INPUT_RING_TYPE_RX
+ uint8_t unused_0;
+ /* Physical number of the ring. */
+ uint16_t ring_id;
+ /* Ring config enable bits. */
+ uint16_t enables;
+ /*
+ * For Rx rings, the incoming packet data can be placed at either
+ * a 0B, 2B, 10B or 12B offset from the start of the Rx packet
+ * buffer.
+ * When '1', the received packet will be padded with 2B, 10B or 12B
+ * of zeros at the front of the packet. The exact offset is specified
+ * by rx_sop_pad_bytes parameter.
+ * When '0', the received packet will not be padded.
+ * Note that this flag is only used for Rx rings and is ignored
+ * for all other rings included Rx Aggregation rings.
+ */
+ #define HWRM_RING_CFG_INPUT_ENABLES_RX_SOP_PAD_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * Proxy mode enable, for Tx, Rx and Rx aggregation rings only.
+ * When rings are allocated, the PCI function on which driver issues
+ * HWRM_RING_CFG command is assumed to own the rings. Hardware takes
+ * the buffer descriptors (BDs) from those rings is assumed to issue
+ * packet payload DMA using same PCI function. When proxy mode is
+ * enabled, hardware can perform payload DMA using another PCI
+ * function on same or different host.
+ * When set to '0', the PCI function on which driver issues
+ * HWRM_RING_CFG command is used for host payload DMA operation.
+ * When set to '1', the host PCI function specified by proxy_fid is
+ * used for host payload DMA operation.
+ */
+ #define HWRM_RING_CFG_INPUT_ENABLES_PROXY_MODE_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * Tx ring packet source interface override, for Tx rings only.
+ * When TX rings are allocated, the PCI function on which driver
+ * issues HWRM_RING_CFG is assumed to be source interface of
+ * packets sent from TX ring.
+ * When set to '1', the host PCI function specified by proxy_fid
+ * is used as source interface of the transmitted packets.
+ */
+ #define HWRM_RING_CFG_INPUT_ENABLES_TX_PROXY_SRC_INTF_OVERRIDE \
+ UINT32_C(0x4)
+ /* The sq_id field is valid */
+ #define HWRM_RING_CFG_INPUT_ENABLES_SQ_ID \
+ UINT32_C(0x8)
+ /* Update completion ring ID associated with Tx or Rx ring. */
+ #define HWRM_RING_CFG_INPUT_ENABLES_CMPL_RING_ID_UPDATE \
+ UINT32_C(0x10)
+ /*
+ * Proxy function FID value.
+ * This value is only used when either proxy_mode_enable flag or
+ * tx_proxy_svif_override is set to '1'.
+ * When proxy_mode_enable is set to '1', it identifies a host PCI
+ * function used for host payload DMA operations.
+ * When tx_proxy_src_intf is set to '1', it identifies a host PCI
+ * function as source interface for all transmitted packets from
+ * the TX ring.
+ */
+ uint16_t proxy_fid;
+ /*
+ * Identifies the new scheduler queue (SQ) to associate with the ring.
+ * Only valid for Tx rings.
+ * A value of zero indicates that the Tx ring should be associated
+ * with the default scheduler queue (SQ).
+ */
+ uint16_t sq_id;
+ /*
+ * This field is valid for TX or Rx rings. This value identifies the
+ * new completion ring ID to associate with the TX or Rx ring.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * Rx SOP padding amount in bytes.
+ * This value is only used when rx_sop_pad_enable flag is set to '1'.
+ */
+ uint8_t rx_sop_pad_bytes;
+ uint8_t unused_1[3];
+} __rte_packed;
+
+/* hwrm_ring_cfg_output (size:128b/16B) */
+struct hwrm_ring_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_ring_qcfg *
+ ******************/
+
+
+/* hwrm_ring_qcfg_input (size:192b/24B) */
+struct hwrm_ring_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* TX Ring (TR) */
+ #define HWRM_RING_QCFG_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_QCFG_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ #define HWRM_RING_QCFG_INPUT_RING_TYPE_LAST \
+ HWRM_RING_QCFG_INPUT_RING_TYPE_RX
+ uint8_t unused_0[5];
+ /* Physical number of the ring. */
+ uint16_t ring_id;
+} __rte_packed;
+
+/* hwrm_ring_qcfg_output (size:192b/24B) */
+struct hwrm_ring_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Ring config enable bits. */
+ uint16_t enables;
+ /*
+ * For Rx rings, the incoming packet data can be placed at either
+ * a 0B, 2B, 10B or 12B offset from the start of the Rx packet
+ * buffer.
+ * When '1', the received packet will be padded with 2B, 10B or 12B
+ * of zeros at the front of the packet. The exact offset is specified
+ * by rx_sop_pad_bytes parameter.
+ * When '0', the received packet will not be padded.
+ * Note that this flag is only used for Rx rings and is ignored
+ * for all other rings included Rx Aggregation rings.
+ */
+ #define HWRM_RING_QCFG_OUTPUT_ENABLES_RX_SOP_PAD_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * Proxy mode enable, for Tx, Rx and Rx aggregation rings only.
+ * When rings are allocated, the PCI function on which driver issues
+ * HWRM_RING_CFG command is assumed to own the rings. Hardware takes
+ * the buffer descriptors (BDs) from those rings is assumed to issue
+ * packet payload DMA using same PCI function. When proxy mode is
+ * enabled, hardware can perform payload DMA using another PCI
+ * function on same or different host.
+ * When set to '0', the PCI function on which driver issues
+ * HWRM_RING_CFG command is used for host payload DMA operation.
+ * When set to '1', the host PCI function specified by proxy_fid is
+ * used for host payload DMA operation.
+ */
+ #define HWRM_RING_QCFG_OUTPUT_ENABLES_PROXY_MODE_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * Tx ring packet source interface override, for Tx rings only.
+ * When TX rings are allocated, the PCI function on which driver
+ * issues HWRM_RING_CFG is assumed to be source interface of
+ * packets sent from TX ring.
+ * When set to '1', the host PCI function specified by proxy_fid is
+ * used as source interface of the transmitted packets.
+ */
+ #define HWRM_RING_QCFG_OUTPUT_ENABLES_TX_PROXY_SRC_INTF_OVERRIDE \
+ UINT32_C(0x4)
+ /*
+ * Proxy function FID value.
+ * This value is only used when either proxy_mode_enable flag or
+ * tx_proxy_svif_override is set to '1'.
+ * When proxy_mode_enable is set to '1', it identifies a host PCI
+ * function used for host payload DMA operations.
+ * When tx_proxy_src_intf is set to '1', it identifies a host PCI
+ * function as source interface for all transmitted packets from the TX
+ * ring.
+ */
+ uint16_t proxy_fid;
+ /*
+ * Identifies the new scheduler queue (SQ) to associate with the ring.
+ * Only valid for Tx rings.
+ * A value of zero indicates that the Tx ring should be associated with
+ * the default scheduler queue (SQ).
+ */
+ uint16_t sq_id;
+ /*
+ * This field is used when ring_type is a TX or Rx ring.
+ * This value indicates what completion ring the TX or Rx ring
+ * is associated with.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * Rx SOP padding amount in bytes.
+ * This value is only used when rx_sop_pad_enable flag is set to '1'.
+ */
+ uint8_t rx_sop_pad_bytes;
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_ring_aggint_qcaps *
+ **************************/
+
+
+/* hwrm_ring_aggint_qcaps_input (size:128b/16B) */
+struct hwrm_ring_aggint_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */
+struct hwrm_ring_aggint_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t cmpl_params;
+ /*
+ * When this bit is set to '1', int_lat_tmr_min can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MIN \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', int_lat_tmr_max can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MAX \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', timer_reset can be enabled
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_TIMER_RESET \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', ring_idle can be enabled
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_RING_IDLE \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', num_cmpl_dma_aggr can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', num_cmpl_dma_aggr_during_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR_DURING_INT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', cmpl_aggr_dma_tmr can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '1', cmpl_aggr_dma_tmr_during_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR_DURING_INT \
+ UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', num_cmpl_aggr_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_AGGR_INT \
+ UINT32_C(0x100)
+ uint32_t nq_params;
+ /*
+ * When this bit is set to '1', int_lat_tmr_min can be configured
+ * on notification queues.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_NQ_PARAMS_INT_LAT_TMR_MIN \
+ UINT32_C(0x1)
+ /* Minimum value for num_cmpl_dma_aggr */
+ uint16_t num_cmpl_dma_aggr_min;
+ /* Maximum value for num_cmpl_dma_aggr */
+ uint16_t num_cmpl_dma_aggr_max;
+ /* Minimum value for num_cmpl_dma_aggr_during_int */
+ uint16_t num_cmpl_dma_aggr_during_int_min;
+ /* Maximum value for num_cmpl_dma_aggr_during_int */
+ uint16_t num_cmpl_dma_aggr_during_int_max;
+ /* Minimum value for cmpl_aggr_dma_tmr */
+ uint16_t cmpl_aggr_dma_tmr_min;
+ /* Maximum value for cmpl_aggr_dma_tmr */
+ uint16_t cmpl_aggr_dma_tmr_max;
+ /* Minimum value for cmpl_aggr_dma_tmr_during_int */
+ uint16_t cmpl_aggr_dma_tmr_during_int_min;
+ /* Maximum value for cmpl_aggr_dma_tmr_during_int */
+ uint16_t cmpl_aggr_dma_tmr_during_int_max;
+ /* Minimum value for int_lat_tmr_min */
+ uint16_t int_lat_tmr_min_min;
+ /* Maximum value for int_lat_tmr_min */
+ uint16_t int_lat_tmr_min_max;
+ /* Minimum value for int_lat_tmr_max */
+ uint16_t int_lat_tmr_max_min;
+ /* Maximum value for int_lat_tmr_max */
+ uint16_t int_lat_tmr_max_max;
+ /* Minimum value for num_cmpl_aggr_int */
+ uint16_t num_cmpl_aggr_int_min;
+ /* Maximum value for num_cmpl_aggr_int */
+ uint16_t num_cmpl_aggr_int_max;
+ /* The units for timer parameters, in nanoseconds. */
+ uint16_t timer_units;
+ uint8_t unused_0[1];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************************
+ * hwrm_ring_cmpl_ring_qaggint_params *
+ **************************************/
+
+
+/* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */
+struct hwrm_ring_cmpl_ring_qaggint_params_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Physical number of completion ring. */
+ uint16_t ring_id;
+ uint16_t flags;
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_UNUSED_0_MASK \
+ UINT32_C(0x3)
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_UNUSED_0_SFT 0
+ /*
+ * Set this flag to 1 when querying parameters on a notification
+ * queue. Set this flag to 0 when querying parameters on a
+ * completion queue or completion ring.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_IS_NQ \
+ UINT32_C(0x4)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */
+struct hwrm_ring_cmpl_ring_qaggint_params_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t flags;
+ /*
+ * When this bit is set to '1', interrupt max
+ * timer is reset whenever a completion is received.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', ring idle mode
+ * aggregation will be enabled.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \
+ UINT32_C(0x2)
+ /*
+ * Number of completions to aggregate before DMA
+ * during the normal mode.
+ */
+ uint16_t num_cmpl_dma_aggr;
+ /*
+ * Number of completions to aggregate before DMA
+ * during the interrupt mode.
+ */
+ uint16_t num_cmpl_dma_aggr_during_int;
+ /*
+ * Timer used to aggregate completions before
+ * DMA during the normal mode (not in interrupt mode).
+ */
+ uint16_t cmpl_aggr_dma_tmr;
+ /*
+ * Timer used to aggregate completions before
+ * DMA when in interrupt mode.
+ */
+ uint16_t cmpl_aggr_dma_tmr_during_int;
+ /* Minimum time between two interrupts. */
+ uint16_t int_lat_tmr_min;
+ /*
+ * Maximum wait time spent aggregating
+ * completions before signaling the interrupt after the
+ * interrupt is enabled.
+ */
+ uint16_t int_lat_tmr_max;
+ /*
+ * Minimum number of completions aggregated before signaling
+ * an interrupt.
+ */
+ uint16_t num_cmpl_aggr_int;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************************
+ * hwrm_ring_cmpl_ring_cfg_aggint_params *
+ *****************************************/
+
+
+/* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Physical number of completion ring. */
+ uint16_t ring_id;
+ uint16_t flags;
+ /*
+ * When this bit is set to '1', interrupt latency max
+ * timer is reset whenever a completion is received.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', ring idle mode
+ * aggregation will be enabled.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \
+ UINT32_C(0x2)
+ /*
+ * Set this flag to 1 when configuring parameters on a
+ * notification queue. Set this flag to 0 when configuring
+ * parameters on a completion queue or completion ring.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \
+ UINT32_C(0x4)
+ /*
+ * Number of completions to aggregate before DMA
+ * during the normal mode.
+ */
+ uint16_t num_cmpl_dma_aggr;
+ /*
+ * Number of completions to aggregate before DMA
+ * during the interrupt mode.
+ */
+ uint16_t num_cmpl_dma_aggr_during_int;
+ /*
+ * Timer used to aggregate completions before
+ * DMA during the normal mode (not in interrupt mode).
+ */
+ uint16_t cmpl_aggr_dma_tmr;
+ /*
+ * Timer used to aggregate completions before
+ * DMA while in interrupt mode.
+ */
+ uint16_t cmpl_aggr_dma_tmr_during_int;
+ /* Minimum time between two interrupts. */
+ uint16_t int_lat_tmr_min;
+ /*
+ * Maximum wait time spent aggregating
+ * completions before signaling the interrupt after the
+ * interrupt is enabled.
+ */
+ uint16_t int_lat_tmr_max;
+ /*
+ * Minimum number of completions aggregated before signaling
+ * an interrupt.
+ */
+ uint16_t num_cmpl_aggr_int;
+ /*
+ * Bitfield that indicates which parameters are to be applied. Only
+ * required when configuring devices with notification queues, and
+ * used in that case to set certain parameters on completion queues
+ * and others on notification queues.
+ */
+ uint16_t enables;
+ /*
+ * This bit must be '1' for the num_cmpl_dma_aggr field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cmpl_aggr_dma_tmr field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the int_lat_tmr_min field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the int_lat_tmr_max field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the num_cmpl_aggr_int field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \
+ UINT32_C(0x20)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_ring_grp_alloc *
+ ***********************/
+
+
+/* hwrm_ring_grp_alloc_input (size:192b/24B) */
+struct hwrm_ring_grp_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This value identifies the CR associated with the ring
+ * group.
+ */
+ uint16_t cr;
+ /*
+ * This value identifies the main RR associated with the ring
+ * group.
+ */
+ uint16_t rr;
+ /*
+ * This value identifies the aggregation RR associated with
+ * the ring group. If this value is 0xFF... (All Fs), then no
+ * Aggregation ring will be set.
+ */
+ uint16_t ar;
+ /*
+ * This value identifies the statistics context associated
+ * with the ring group.
+ */
+ uint16_t sc;
+} __rte_packed;
+
+/* hwrm_ring_grp_alloc_output (size:128b/16B) */
+struct hwrm_ring_grp_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is the ring group ID value. Use this value to program
+ * the default ring group for the VNIC or as table entries
+ * in an RSS/COS context.
+ */
+ uint32_t ring_group_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_ring_grp_free *
+ **********************/
+
+
+/* hwrm_ring_grp_free_input (size:192b/24B) */
+struct hwrm_ring_grp_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* This is the ring group ID value. */
+ uint32_t ring_group_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_ring_grp_free_output (size:128b/16B) */
+struct hwrm_ring_grp_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_ring_sq_alloc *
+ **********************/
+
+
+/* hwrm_ring_sq_alloc_input (size:1088b/136B) */
+struct hwrm_ring_sq_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the tqm_ring0 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING0 UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the tqm_ring1 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING1 UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the tqm_ring2 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING2 UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the tqm_ring3 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING3 UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the tqm_ring4 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING4 UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the tqm_ring5 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING5 UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the tqm_ring6 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING6 UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the tqm_ring7 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING7 UINT32_C(0x80)
+ /* Reserved for future use. */
+ uint32_t reserved;
+ /* TQM ring 0 page size and level. */
+ uint8_t tqm_ring0_pg_size_tqm_ring0_lvl;
+ /* TQM ring 0 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_2
+ /* TQM ring 0 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_1G
+ /* TQM ring 1 page size and level. */
+ uint8_t tqm_ring1_pg_size_tqm_ring1_lvl;
+ /* TQM ring 1 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_2
+ /* TQM ring 1 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_1G
+ /* TQM ring 2 page size and level. */
+ uint8_t tqm_ring2_pg_size_tqm_ring2_lvl;
+ /* TQM ring 2 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_2
+ /* TQM ring 2 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_1G
+ /* TQM ring 3 page size and level. */
+ uint8_t tqm_ring3_pg_size_tqm_ring3_lvl;
+ /* TQM ring 3 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_2
+ /* TQM ring 3 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_1G
+ /* TQM ring 4 page size and level. */
+ uint8_t tqm_ring4_pg_size_tqm_ring4_lvl;
+ /* TQM ring 4 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_2
+ /* TQM ring 4 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_1G
+ /* TQM ring 5 page size and level. */
+ uint8_t tqm_ring5_pg_size_tqm_ring5_lvl;
+ /* TQM ring 5 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_2
+ /* TQM ring 5 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_1G
+ /* TQM ring 6 page size and level. */
+ uint8_t tqm_ring6_pg_size_tqm_ring6_lvl;
+ /* TQM ring 6 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_2
+ /* TQM ring 6 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_1G
+ /* TQM ring 7 page size and level. */
+ uint8_t tqm_ring7_pg_size_tqm_ring7_lvl;
+ /* TQM ring 7 PBL indirect levels. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_MASK UINT32_C(0xf)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_2
+ /* TQM ring 7 page size. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_MASK UINT32_C(0xf0)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_LAST \
+ HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_1G
+ /* TQM ring 0 page directory. */
+ uint64_t tqm_ring0_page_dir;
+ /* TQM ring 1 page directory. */
+ uint64_t tqm_ring1_page_dir;
+ /* TQM ring 2 page directory. */
+ uint64_t tqm_ring2_page_dir;
+ /* TQM ring 3 page directory. */
+ uint64_t tqm_ring3_page_dir;
+ /* TQM ring 4 page directory. */
+ uint64_t tqm_ring4_page_dir;
+ /* TQM ring 5 page directory. */
+ uint64_t tqm_ring5_page_dir;
+ /* TQM ring 6 page directory. */
+ uint64_t tqm_ring6_page_dir;
+ /* TQM ring 7 page directory. */
+ uint64_t tqm_ring7_page_dir;
+ /*
+ * Number of TQM ring 0 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring0_num_entries;
+ /*
+ * Number of TQM ring 1 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring1_num_entries;
+ /*
+ * Number of TQM ring 2 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring2_num_entries;
+ /*
+ * Number of TQM ring 3 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring3_num_entries;
+ /*
+ * Number of TQM ring 4 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring4_num_entries;
+ /*
+ * Number of TQM ring 5 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring5_num_entries;
+ /*
+ * Number of TQM ring 6 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring6_num_entries;
+ /*
+ * Number of TQM ring 7 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SQ and then reallocate it.
+ */
+ uint32_t tqm_ring7_num_entries;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t tqm_entry_size;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_ring_sq_alloc_output (size:128b/16B) */
+struct hwrm_ring_sq_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is an identifier for the SQ to be used in other HWRM commands
+ * that need to reference this SQ. This value is greater than zero
+ * (i.e. a sq_id of zero references the default SQ).
+ */
+ uint16_t sq_id;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************
+ * hwrm_ring_sq_cfg *
+ ********************/
+
+
+/* hwrm_ring_sq_cfg_input (size:768b/96B) */
+struct hwrm_ring_sq_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Identifies the SQ being configured. A sq_id of zero refers to the
+ * default SQ.
+ */
+ uint16_t sq_id;
+ /*
+ * This field is an 8 bit bitmap that indicates which TCs are enabled
+ * in this SQ. Bit 0 represents traffic class 0 and bit 7 represents
+ * traffic class 7.
+ */
+ uint8_t tc_enabled;
+ uint8_t unused_0;
+ uint32_t flags;
+ /* The tc_max_bw array and the max_bw parameters are valid */
+ #define HWRM_RING_SQ_CFG_INPUT_FLAGS_TC_MAX_BW_ENABLED \
+ UINT32_C(0x1)
+ /* The tc_min_bw array is valid */
+ #define HWRM_RING_SQ_CFG_INPUT_FLAGS_TC_MIN_BW_ENABLED \
+ UINT32_C(0x2)
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc0;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc1;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc2;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc3;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc4;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc5;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc6;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc7;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc0;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc1;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc2;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc3;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc4;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc5;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc6;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SQ.
+ */
+ uint32_t min_bw_tc7;
+ /*
+ * Indicates the max bandwidth for all enabled traffic classes in
+ * this SQ, specified in Mbps.
+ */
+ uint32_t max_bw;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_sq_cfg_output (size:128b/16B) */
+struct hwrm_ring_sq_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_ring_sq_free *
+ *********************/
+
+
+/* hwrm_ring_sq_free_input (size:192b/24B) */
+struct hwrm_ring_sq_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Identifies the SQ being freed. */
+ uint16_t sq_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_ring_sq_free_output (size:128b/16B) */
+struct hwrm_ring_sq_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+/*
+ * special reserved flow ID to identify per function default
+ * flows for vSwitch offload
+ */
+#define DEFAULT_FLOW_ID 0xFFFFFFFFUL
+/*
+ * special reserved flow ID to identify per function RoCEv1
+ * flows
+ */
+#define ROCEV1_FLOW_ID 0xFFFFFFFEUL
+/*
+ * special reserved flow ID to identify per function RoCEv2
+ * flows
+ */
+#define ROCEV2_FLOW_ID 0xFFFFFFFDUL
+/*
+ * special reserved flow ID to identify per function RoCEv2
+ * CNP flows
+ */
+#define ROCEV2_CNP_FLOW_ID 0xFFFFFFFCUL
+
+/****************************
+ * hwrm_cfa_l2_filter_alloc *
+ ****************************/
+
+
+/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */
+struct hwrm_cfa_l2_filter_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
+ UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
+ /* Setting of this flag indicates the applicability to the loopback path. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+ UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
+ UINT32_C(0x4)
+ /*
+ * If this flag is set, all t_l2_* fields are invalid
+ * and they should not be specified.
+ * If this flag is set, then l2_* fields refer to
+ * fields of outermost L2 header.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
+ UINT32_C(0x8)
+ /*
+ * Enumeration denoting NO_ROCE_L2 to support old drivers.
+ * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_MASK \
+ UINT32_C(0x30)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_SFT 4
+ /* To support old drivers */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
+ (UINT32_C(0x0) << 4)
+ /* Only L2 traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_L2 \
+ (UINT32_C(0x1) << 4)
+ /* Roce & L2 traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE \
+ (UINT32_C(0x2) << 4)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE
+ /*
+ * Setting of this flag indicates that no XDP filter is created with
+ * L2 filter.
+ * 0 - legacy behavior, XDP filter is created with L2 filter
+ * 1 - XDP filter won't be created with L2 filter
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_XDP_DISABLE \
+ UINT32_C(0x40)
+ /*
+ * Setting this flag to 1 indicate the L2 fields in this command
+ * pertain to source fields. Setting this flag to 0 indicate the
+ * L2 fields in this command pertain to the destination fields
+ * and this is the default/legacy behavior.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_SOURCE_VALID \
+ UINT32_C(0x80)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the l2_addr field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the l2_addr_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the l2_ovlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the l2_ivlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the t_l2_addr field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the t_l2_addr_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the t_l2_ovlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the t_l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the t_l2_ivlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the t_l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the src_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the src_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the num_vlans field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_NUM_VLANS \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the t_num_vlans field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_NUM_VLANS \
+ UINT32_C(0x40000)
+ /*
+ * This value sets the match value for the L2 MAC address.
+ * Destination MAC address for RX path.
+ * Source MAC address for TX path.
+ */
+ uint8_t l2_addr[6];
+ /* This value sets the match value for the number of VLANs. */
+ uint8_t num_vlans;
+ /*
+ * This value sets the match value for the number of VLANs
+ * in the tunnel headers.
+ */
+ uint8_t t_num_vlans;
+ /*
+ * This value sets the mask value for the L2 address.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint8_t l2_addr_mask[6];
+ /* This value sets VLAN ID value for outer VLAN. */
+ uint16_t l2_ovlan;
+ /*
+ * This value sets the mask value for the ovlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t l2_ovlan_mask;
+ /* This value sets VLAN ID value for inner VLAN. */
+ uint16_t l2_ivlan;
+ /*
+ * This value sets the mask value for the ivlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t l2_ivlan_mask;
+ uint8_t unused_1[2];
+ /*
+ * This value sets the match value for the tunnel
+ * L2 MAC address.
+ * Destination MAC address for RX path.
+ * Source MAC address for TX path.
+ */
+ uint8_t t_l2_addr[6];
+ uint8_t unused_2[2];
+ /*
+ * This value sets the mask value for the tunnel L2
+ * address.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint8_t t_l2_addr_mask[6];
+ /* This value sets VLAN ID value for tunnel outer VLAN. */
+ uint16_t t_l2_ovlan;
+ /*
+ * This value sets the mask value for the tunnel ovlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t t_l2_ovlan_mask;
+ /* This value sets VLAN ID value for tunnel inner VLAN. */
+ uint16_t t_l2_ivlan;
+ /*
+ * This value sets the mask value for the tunnel ivlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t t_l2_ivlan_mask;
+ /* This value identifies the type of source of the packet. */
+ uint8_t src_type;
+ /* Network port */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
+ /* Physical function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
+ /* Virtual function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
+ /* Virtual NIC of a function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
+ /* Embedded processor for CFA management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
+ /* Embedded processor for OOB management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
+ /* Embedded processor for RoCE */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
+ /* Embedded processor for network proxy functions */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG
+ uint8_t unused_3;
+ /*
+ * This value is the id of the source.
+ * For a network port, it represents port_id.
+ * For a physical function, it represents fid.
+ * For a virtual function, it represents vf_id.
+ * For a vnic, it represents vnic_id.
+ * For embedded processors, this id is not valid.
+ *
+ * Notes:
+ * 1. The function ID is implied if it src_id is
+ * not provided for a src_type that is either
+ */
+ uint32_t src_id;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
- /* reserved. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
- /* reserved. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_4;
/*
- * Priority level for strict priority. Valid only when the
- * tsa_assign is 0 - Strict Priority (SP)
- * 0..7 - Valid values.
- * 8..255 - Reserved.
- */
- uint8_t queue_id6_pri_lvl;
- /*
- * Weight used to allocate remaining BW for this COS after
- * servicing guaranteed bandwidths for all COS.
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
*/
- uint8_t queue_id6_bw_weight;
- /* ID of CoS Queue 7. */
- uint8_t queue_id7;
+ uint16_t dst_id;
/*
- * Minimum BW allocated to CoS Queue.
- * The HWRM will translate this value into byte counter and
- * time interval used for this COS inside the device.
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
*/
- uint32_t queue_id7_min_bw;
- /* The bandwidth value. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \
- HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \
- HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID
+ uint16_t mirror_vnic_id;
/*
- * Maximum BW allocated to CoS queue.
- * The HWRM will translate this value into byte counter and
- * time interval used for this COS inside the device.
+ * This hint is provided to help in placing
+ * the filter in the filter table.
*/
- uint32_t queue_id7_max_bw;
- /* The bandwidth value. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \
- HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \
- HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID
- /* Transmission Selection Algorithm (TSA) for CoS Queue. */
- uint8_t queue_id7_tsa_assign;
- /* Strict Priority */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \
+ uint8_t pri_hint;
+ /* No preference */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
UINT32_C(0x0)
- /* Enhanced Transmission Selection */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
+ /* Above the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
UINT32_C(0x1)
- /* reserved. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
+ /* Below the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
UINT32_C(0x2)
- /* reserved. */
- #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
- UINT32_C(0xff)
- /*
- * Priority level for strict priority. Valid only when the
- * tsa_assign is 0 - Strict Priority (SP)
- * 0..7 - Valid values.
- * 8..255 - Reserved.
- */
- uint8_t queue_id7_pri_lvl;
+ /* As high as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
+ UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
+ UINT32_C(0x4)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN
+ uint8_t unused_5;
+ uint32_t unused_6;
/*
- * Weight used to allocate remaining BW for this COS after
- * servicing guaranteed bandwidths for all COS.
+ * This is the ID of the filter that goes along with
+ * the pri_hint.
+ *
+ * This field is valid only for the following values.
+ * 1 - Above the given filter
+ * 2 - Below the given filter
*/
- uint8_t queue_id7_bw_weight;
- uint8_t unused_1[5];
-} __attribute__((packed));
+ uint64_t l2_filter_id_hint;
+} __rte_packed;
-/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */
-struct hwrm_queue_cos2bw_cfg_output {
+/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_l2_filter_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __attribute__((packed));
-
-/*******************
- * hwrm_vnic_alloc *
- *******************/
-
-
-/* hwrm_vnic_alloc_input (size:192b/24B) */
-struct hwrm_vnic_alloc_input {
- /* The HWRM command request type. */
- uint16_t req_type;
- /*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
- */
- uint16_t cmpl_ring;
/*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
*/
- uint16_t seq_id;
+ uint64_t l2_filter_id;
/*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
- * * 0xFFFD - Reserved for user-space HWRM interface
- * * 0xFFFF - HWRM
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
*/
- uint16_t target_id;
+ uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
/*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
*/
- uint64_t resp_addr;
- uint32_t flags;
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
/*
- * When this bit is '1', this VNIC is requested to
- * be the default VNIC for this function.
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
*/
- #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
- uint8_t unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_vnic_alloc_output (size:128b/16B) */
-struct hwrm_vnic_alloc_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- /* Logical vnic ID */
- uint32_t vnic_id;
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************
- * hwrm_vnic_free *
- ******************/
+/***************************
+ * hwrm_cfa_l2_filter_free *
+ ***************************/
-/* hwrm_vnic_free_input (size:192b/24B) */
-struct hwrm_vnic_free_input {
+/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_l2_filter_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Logical vnic ID */
- uint32_t vnic_id;
- uint8_t unused_0[4];
-} __attribute__((packed));
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+} __rte_packed;
-/* hwrm_vnic_free_output (size:128b/16B) */
-struct hwrm_vnic_free_output {
+/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_l2_filter_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*****************
- * hwrm_vnic_cfg *
- *****************/
+/**************************
+ * hwrm_cfa_l2_filter_cfg *
+ **************************/
-/* hwrm_vnic_cfg_input (size:320b/40B) */
-struct hwrm_vnic_cfg_input {
+/* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */
+struct hwrm_cfa_l2_filter_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
uint64_t resp_addr;
uint32_t flags;
/*
- * When this bit is '1', the VNIC is requested to
- * be the default VNIC for the function.
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
*/
- #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH \
UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC is being configured to
- * strip VLAN in the RX path.
- * If set to '0', then VLAN stripping is disabled on
- * this VNIC.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
- UINT32_C(0x2)
- /*
- * When this bit is '1', the VNIC is being configured to
- * buffer receive packets in the hardware until the host
- * posts new receive buffers.
- * If set to '0', then bd_stall is being configured to be
- * disabled on this VNIC.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
- UINT32_C(0x4)
- /*
- * When this bit is '1', the VNIC is being configured to
- * receive both RoCE and non-RoCE traffic.
- * If set to '0', then this VNIC is not configured to be
- * operating in dual VNIC mode.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
- UINT32_C(0x8)
- /*
- * When this flag is set to '1', the VNIC is requested to
- * be configured to receive only RoCE traffic.
- * If this flag is set to '0', then this flag shall be
- * ignored by the HWRM.
- * If roce_dual_vnic_mode flag is set to '1'
- * or roce_mirroring_capable_vnic_mode flag to 1,
- * then the HWRM client shall not set this flag to '1'.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
- UINT32_C(0x10)
- /*
- * When a VNIC uses one destination ring group for certain
- * application (e.g. Receive Flow Steering) where
- * exact match is used to direct packets to a VNIC with one
- * destination ring group only, there is no need to configure
- * RSS indirection table for that VNIC as only one destination
- * ring group is used.
- *
- * This flag is used to enable a mode where
- * RSS is enabled in the VNIC using a RSS context
- * for computing RSS hash but the RSS indirection table is
- * not configured using hwrm_vnic_rss_cfg.
- *
- * If this mode is enabled, then the driver should not program
- * RSS indirection table for the RSS context that is used for
- * computing RSS hash only.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
- UINT32_C(0x20)
- /*
- * When this bit is '1', the VNIC is being configured to
- * receive both RoCE and non-RoCE traffic, but forward only the
- * RoCE traffic further. Also, RoCE traffic can be mirrored to
- * L2 driver.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
- UINT32_C(0x40)
- uint32_t enables;
- /*
- * This bit must be '1' for the dflt_ring_grp field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \
UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
/*
- * This bit must be '1' for the rss_rule field to be
- * configured.
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
*/
- #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP \
UINT32_C(0x2)
/*
- * This bit must be '1' for the cos_rule field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
- UINT32_C(0x4)
- /*
- * This bit must be '1' for the lb_rule field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
- UINT32_C(0x8)
- /*
- * This bit must be '1' for the mru field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
- UINT32_C(0x10)
- /*
- * This bit must be '1' for the default_rx_ring_id field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
- UINT32_C(0x20)
- /*
- * This bit must be '1' for the default_cmpl_ring_id field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
- UINT32_C(0x40)
- /* Logical vnic ID */
- uint16_t vnic_id;
- /*
- * Default Completion ring for the VNIC. This ring will
- * be chosen if packet does not match any RSS rules and if
- * there is no COS rule.
- */
- uint16_t dflt_ring_grp;
- /*
- * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
- * there is no RSS rule.
+ * Enumeration denoting NO_ROCE_L2 to support old drivers.
+ * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
*/
- uint16_t rss_rule;
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_MASK \
+ UINT32_C(0xc)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_SFT 2
+ /* To support old drivers */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
+ (UINT32_C(0x0) << 2)
+ /* Only L2 traffic */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_L2 \
+ (UINT32_C(0x1) << 2)
+ /* Roce & L2 traffic */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE \
+ (UINT32_C(0x2) << 2)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_LAST \
+ HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE
+ uint32_t enables;
/*
- * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
- * there is no COS rule.
+ * This bit must be '1' for the dst_id field to be
+ * configured.
*/
- uint16_t cos_rule;
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x1)
/*
- * RSS ID for load balancing rule/table structure.
- * 0xFF... (All Fs) if there is no LB rule.
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
*/
- uint16_t lb_rule;
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ UINT32_C(0x2)
/*
- * The maximum receive unit of the vnic.
- * Each vnic is associated with a function.
- * The vnic mru value overwrites the mru setting of the
- * associated function.
- * The HWRM shall make sure that vnic mru does not exceed
- * the mru of the port the function is associated with.
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
*/
- uint16_t mru;
+ uint64_t l2_filter_id;
/*
- * Default Rx ring for the VNIC. This ring will
- * be chosen if packet does not match any RSS rules.
- * The aggregation ring associated with the Rx ring is
- * implied based on the Rx ring specified when the
- * aggregation ring was allocated.
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
*/
- uint16_t default_rx_ring_id;
+ uint32_t dst_id;
/*
- * Default completion ring for the VNIC. This ring will
- * be chosen if packet does not match any RSS rules.
+ * New Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
*/
- uint16_t default_cmpl_ring_id;
-} __attribute__((packed));
+ uint32_t new_mirror_vnic_id;
+} __rte_packed;
-/* hwrm_vnic_cfg_output (size:128b/16B) */
-struct hwrm_vnic_cfg_output {
+/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_l2_filter_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************
- * hwrm_vnic_qcfg *
- ******************/
+/***************************
+ * hwrm_cfa_l2_set_rx_mask *
+ ***************************/
-/* hwrm_vnic_qcfg_input (size:256b/32B) */
-struct hwrm_vnic_qcfg_input {
+/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */
+struct hwrm_cfa_l2_set_rx_mask_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
+ /* VNIC ID */
+ uint32_t vnic_id;
+ uint32_t mask;
/*
- * This bit must be '1' for the vf_id_valid field to be
- * configured.
+ * When this bit is '1', the function is requested to accept
+ * multi-cast packets specified by the multicast addr table.
*/
- #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
- /* Logical vnic ID */
- uint32_t vnic_id;
- /* ID of Virtual Function whose VNIC resource is being queried. */
- uint16_t vf_id;
- uint8_t unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_vnic_qcfg_output (size:256b/32B) */
-struct hwrm_vnic_qcfg_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- /* Default Completion ring for the VNIC. */
- uint16_t dflt_ring_grp;
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \
+ UINT32_C(0x2)
/*
- * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
- * there is no RSS rule.
+ * When this bit is '1', the function is requested to accept
+ * all multi-cast packets.
*/
- uint16_t rss_rule;
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \
+ UINT32_C(0x4)
/*
- * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
- * there is no COS rule.
+ * When this bit is '1', the function is requested to accept
+ * broadcast packets.
*/
- uint16_t cos_rule;
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \
+ UINT32_C(0x8)
/*
- * RSS ID for load balancing rule/table structure.
- * 0xFF... (All Fs) if there is no LB rule.
+ * When this bit is '1', the function is requested to be
+ * put in the promiscuous mode.
+ *
+ * The HWRM should accept any function to set up
+ * promiscuous mode.
+ *
+ * The HWRM shall follow the semantics below for the
+ * promiscuous mode support.
+ * # When partitioning is not enabled on a port
+ * (i.e. single PF on the port), then the PF shall
+ * be allowed to be in the promiscuous mode. When the
+ * PF is in the promiscuous mode, then it shall
+ * receive all host bound traffic on that port.
+ * # When partitioning is enabled on a port
+ * (i.e. multiple PFs per port) and a PF on that
+ * port is in the promiscuous mode, then the PF
+ * receives all traffic within that partition as
+ * identified by a unique identifier for the
+ * PF (e.g. S-Tag). If a unique outer VLAN
+ * for the PF is specified, then the setting of
+ * promiscuous mode on that PF shall result in the
+ * PF receiving all host bound traffic with matching
+ * outer VLAN.
+ * # A VF shall can be set in the promiscuous mode.
+ * In the promiscuous mode, the VF does not receive any
+ * traffic unless a unique outer VLAN for the
+ * VF is specified. If a unique outer VLAN
+ * for the VF is specified, then the setting of
+ * promiscuous mode on that VF shall result in the
+ * VF receiving all host bound traffic with the
+ * matching outer VLAN.
+ * # The HWRM shall allow the setting of promiscuous
+ * mode on a function independently from the
+ * promiscuous mode settings on other functions.
*/
- uint16_t lb_rule;
- /* The maximum receive unit of the vnic. */
- uint16_t mru;
- uint8_t unused_0[2];
- uint32_t flags;
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \
+ UINT32_C(0x10)
/*
- * When this bit is '1', the VNIC is the default VNIC for
- * the function.
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for the outermost Layer 2 destination MAC
+ * address field.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \
- UINT32_C(0x1)
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \
+ UINT32_C(0x20)
/*
- * When this bit is '1', the VNIC is configured to
- * strip VLAN in the RX path.
- * If set to '0', then VLAN stripping is disabled on
- * this VNIC.
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for the VLAN-tagged packets that match the
+ * TPID and VID fields of VLAN tags in the VLAN tag
+ * table specified in this command.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \
- UINT32_C(0x2)
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \
+ UINT32_C(0x40)
/*
- * When this bit is '1', the VNIC is configured to
- * buffer receive packets in the hardware until the host
- * posts new receive buffers.
- * If set to '0', then bd_stall is disabled on
- * this VNIC.
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for non-VLAN tagged packets and VLAN-tagged
+ * packets that match the TPID and VID fields of VLAN
+ * tags in the VLAN tag table specified in this command.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \
- UINT32_C(0x4)
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \
+ UINT32_C(0x80)
/*
- * When this bit is '1', the VNIC is configured to
- * receive both RoCE and non-RoCE traffic.
- * If set to '0', then this VNIC is not configured to
- * operate in dual VNIC mode.
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for non-VLAN tagged packets and VLAN-tagged
+ * packets matching any VLAN tag.
+ *
+ * If this flag is set, then the HWRM shall ignore
+ * VLAN tags specified in vlan_tag_tbl.
+ *
+ * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan
+ * flags is set, then the HWRM shall ignore
+ * VLAN tags specified in vlan_tag_tbl.
+ *
+ * The HWRM client shall set at most one flag out of
+ * vlanonly, vlan_nonvlan, and anyvlan_nonvlan.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
- UINT32_C(0x8)
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
+ UINT32_C(0x100)
+ /* This is the address for mcast address tbl. */
+ uint64_t mc_tbl_addr;
/*
- * When this flag is set to '1', the VNIC is configured to
- * receive only RoCE traffic.
- * When this flag is set to '0', the VNIC is not configured
- * to receive only RoCE traffic.
- * If roce_dual_vnic_mode flag and this flag both are set
- * to '1', then it is an invalid configuration of the
- * VNIC. The HWRM should not allow that type of
- * mis-configuration by HWRM clients.
+ * This value indicates how many entries in mc_tbl are valid.
+ * Each entry is 6 bytes.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
- UINT32_C(0x10)
+ uint32_t num_mc_entries;
+ uint8_t unused_0[4];
/*
- * When a VNIC uses one destination ring group for certain
- * application (e.g. Receive Flow Steering) where
- * exact match is used to direct packets to a VNIC with one
- * destination ring group only, there is no need to configure
- * RSS indirection table for that VNIC as only one destination
- * ring group is used.
- *
- * When this bit is set to '1', then the VNIC is enabled in a
- * mode where RSS is enabled in the VNIC using a RSS context
- * for computing RSS hash but the RSS indirection table is
- * not configured.
+ * This is the address for VLAN tag table.
+ * Each VLAN entry in the table is 4 bytes of a VLAN tag
+ * including TPID, PCP, DEI, and VID fields in network byte
+ * order.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \
- UINT32_C(0x20)
+ uint64_t vlan_tag_tbl_addr;
/*
- * When this bit is '1', the VNIC is configured to
- * receive both RoCE and non-RoCE traffic, but forward only
- * RoCE traffic further. Also RoCE traffic can be mirrored to
- * L2 driver.
+ * This value indicates how many entries in vlan_tag_tbl are
+ * valid. Each entry is 4 bytes.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
- UINT32_C(0x40)
- uint8_t unused_1[7];
+ uint32_t num_vlan_tags;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */
+struct hwrm_cfa_l2_set_rx_mask_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************
- * hwrm_vnic_qcaps *
- *******************/
+/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */
+struct hwrm_cfa_l2_set_rx_mask_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /* Unable to complete operation due to conflict with Ntuple Filter */
+ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \
+ UINT32_C(0x1)
+ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \
+ HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR
+ uint8_t unused_0[7];
+} __rte_packed;
+/*******************************
+ * hwrm_cfa_vlan_antispoof_cfg *
+ *******************************/
-/* hwrm_vnic_qcaps_input (size:192b/24B) */
-struct hwrm_vnic_qcaps_input {
+
+/* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */
+struct hwrm_cfa_vlan_antispoof_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
- uint8_t unused_0[4];
-} __attribute__((packed));
+ /*
+ * Function ID of the function that is being configured.
+ * Only valid for a VF FID configured by the PF.
+ */
+ uint16_t fid;
+ uint8_t unused_0[2];
+ /* Number of VLAN entries in the vlan_tag_mask_tbl. */
+ uint32_t num_vlan_entries;
+ /*
+ * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
+ * antispoof table. Each table entry contains the 16-bit TPID
+ * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask,
+ * all in network order to match hwrm_cfa_l2_set_rx_mask.
+ * For an individual VLAN entry, the mask value should be 0xfff
+ * for the 12-bit VLAN ID.
+ */
+ uint64_t vlan_tag_mask_tbl_addr;
+} __rte_packed;
-/* hwrm_vnic_qcaps_output (size:192b/24B) */
-struct hwrm_vnic_qcaps_output {
+/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */
+struct hwrm_cfa_vlan_antispoof_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The maximum receive unit that is settable on a vnic. */
- uint16_t mru;
- uint8_t unused_0[2];
- uint32_t flags;
- /* Unused. */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \
- UINT32_C(0x1)
- /*
- * When this bit is '1', the capability of stripping VLAN in
- * the RX path is supported on VNIC(s).
- * If set to '0', then VLAN stripping capability is
- * not supported on VNIC(s).
- */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \
- UINT32_C(0x2)
- /*
- * When this bit is '1', the capability to buffer receive
- * packets in the hardware until the host posts new receive buffers
- * is supported on VNIC(s).
- * If set to '0', then bd_stall capability is not supported
- * on VNIC(s).
- */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \
- UINT32_C(0x4)
- /*
- * When this bit is '1', the capability to
- * receive both RoCE and non-RoCE traffic on VNIC(s) is
- * supported.
- * If set to '0', then the capability to receive
- * both RoCE and non-RoCE traffic on VNIC(s) is
- * not supported.
- */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \
- UINT32_C(0x8)
- /*
- * When this bit is set to '1', the capability to configure
- * a VNIC to receive only RoCE traffic is supported.
- * When this flag is set to '0', the VNIC capability to
- * configure to receive only RoCE traffic is not supported.
- */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \
- UINT32_C(0x10)
- /*
- * When this bit is set to '1', then the capability to enable
- * a VNIC in a mode where RSS context without configuring
- * RSS indirection table is supported (for RSS hash computation).
- * When this bit is set to '0', then a VNIC can not be configured
- * with a mode to enable RSS context without configuring RSS
- * indirection table.
- */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \
- UINT32_C(0x20)
- /*
- * When this bit is '1', the capability to
- * mirror the the RoCE traffic is supported.
- * If set to '0', then the capability to mirror the
- * RoCE traffic is not supported.
- */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \
- UINT32_C(0x40)
- /*
- * When this bit is '1', the outermost RSS hashing capability
- * is supported. If set to '0', then the outermost RSS hashing
- * capability is not supported.
- */
- #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
- UINT32_C(0x80)
- /*
- * This field advertises the maximum concurrent TPA aggregations
- * supported by the VNIC on new devices that support TPA v2.
- * '0' means that TPA v2 is not supported.
- */
- uint16_t max_aggs_supported;
- uint8_t unused_1[5];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*********************
- * hwrm_vnic_tpa_cfg *
- *********************/
+/********************************
+ * hwrm_cfa_vlan_antispoof_qcfg *
+ ********************************/
-/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */
-struct hwrm_vnic_tpa_cfg_input {
+/* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */
+struct hwrm_cfa_vlan_antispoof_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /*
- * When this bit is '1', the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) of
- * non-tunneled TCP packets.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \
- UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) of
- * tunneled TCP packets.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \
- UINT32_C(0x2)
- /*
- * When this bit is '1', the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) according
- * to Windows Receive Segment Coalescing (RSC) rules.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \
- UINT32_C(0x4)
- /*
- * When this bit is '1', the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) according
- * to Linux Generic Receive Offload (GRO) rules.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \
- UINT32_C(0x8)
- /*
- * When this bit is '1', the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) for TCP
- * packets with IP ECN set to non-zero.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \
- UINT32_C(0x10)
- /*
- * When this bit is '1', the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) for
- * GRE tunneled TCP packets only if all packets have the
- * same GRE sequence.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
- UINT32_C(0x20)
- /*
- * When this bit is '1' and the GRO mode is enabled,
- * the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) for
- * TCP/IPv4 packets with consecutively increasing IPIDs.
- * In other words, the last packet that is being
- * aggregated to an already existing aggregation context
- * shall have IPID 1 more than the IPID of the last packet
- * that was aggregated in that aggregation context.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \
- UINT32_C(0x40)
- /*
- * When this bit is '1' and the GRO mode is enabled,
- * the VNIC shall be configured to
- * perform transparent packet aggregation (TPA) for
- * TCP packets with the same TTL (IPv4) or Hop limit (IPv6)
- * value.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \
- UINT32_C(0x80)
- /*
- * When this bit is '1' and the GRO mode is enabled,
- * the VNIC shall DMA payload data using GRO rules.
- * When this bit is '0', the VNIC shall DMA payload data
- * using the more efficient LRO rules of filling all
- * aggregation buffers.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_PACK_AS_GRO \
- UINT32_C(0x100)
- uint32_t enables;
- /*
- * This bit must be '1' for the max_agg_segs field to be
- * configured.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
- /*
- * This bit must be '1' for the max_aggs field to be
- * configured.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
- /*
- * This bit must be '1' for the max_agg_timer field to be
- * configured.
- */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
- /* deprecated bit. Do not use!!! */
- #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
- /* Logical vnic ID */
- uint16_t vnic_id;
- /*
- * This is the maximum number of TCP segments that can
- * be aggregated (unit is Log2). Max value is 31. On new
- * devices supporting TPA v2, the unit is multiples of 4 and
- * valid values are > 0 and <= 63.
- */
- uint16_t max_agg_segs;
- /* 1 segment */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
- /* 2 segments */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
- /* 4 segments */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
- /* 8 segments */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
- /* Any segment size larger than this is not valid */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \
- HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX
- /*
- * This is the maximum number of aggregations this VNIC is
- * allowed (unit is Log2). Max value is 7. On new devices
- * supporting TPA v2, this is in unit of 1 and must be > 0
- * and <= max_aggs_supported in the hwrm_vnic_qcaps response
- * to enable TPA v2.
+ /*
+ * Function ID of the function that is being queried.
+ * Only valid for a VF FID queried by the PF.
*/
- uint16_t max_aggs;
- /* 1 aggregation */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
- /* 2 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
- /* 4 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
- /* 8 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
- /* 16 aggregations */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
- /* Any aggregation size larger than this is not valid */
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
- #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \
- HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX
+ uint16_t fid;
uint8_t unused_0[2];
/*
- * This is the maximum amount of time allowed for
- * an aggregation context to complete after it was initiated.
+ * Maximum number of VLAN entries the firmware is allowed to DMA
+ * to vlan_tag_mask_tbl.
*/
- uint32_t max_agg_timer;
+ uint32_t max_vlan_entries;
/*
- * This is the minimum amount of payload length required to
- * start an aggregation context. This field is deprecated and
- * should be set to 0. The minimum length is set by firmware
- * and can be queried using hwrm_vnic_tpa_qcfg.
+ * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
+ * antispoof table to which firmware will DMA to. Each table
+ * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only),
+ * 16-bit VLAN ID, and a 16-bit mask, all in network order to
+ * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry,
+ * the mask value should be 0xfff for the 12-bit VLAN ID.
*/
- uint32_t min_agg_len;
-} __attribute__((packed));
+ uint64_t vlan_tag_mask_tbl_addr;
+} __rte_packed;
-/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */
-struct hwrm_vnic_tpa_cfg_output {
+/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */
+struct hwrm_cfa_vlan_antispoof_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */
+ uint32_t num_vlan_entries;
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*********************
- * hwrm_vnic_rss_cfg *
- *********************/
+/********************************
+ * hwrm_cfa_tunnel_filter_alloc *
+ ********************************/
-/* hwrm_vnic_rss_cfg_input (size:384b/48B) */
-struct hwrm_vnic_rss_cfg_input {
+/* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */
+struct hwrm_cfa_tunnel_filter_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t hash_type;
+ uint32_t flags;
+ /* Setting of this flag indicates the applicability to the loopback path. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+ UINT32_C(0x1)
+ uint32_t enables;
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source and destination IPv4 addresses of IPv4
- * packets.
+ * This bit must be '1' for the l2_filter_id field to be
+ * configured.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+ UINT32_C(0x1)
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv4 addresses and
- * source/destination ports of TCP/IPv4 packets.
+ * This bit must be '1' for the l2_addr field to be
+ * configured.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
+ UINT32_C(0x2)
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv4 addresses and
- * source/destination ports of UDP/IPv4 packets.
+ * This bit must be '1' for the l2_ivlan field to be
+ * configured.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
+ UINT32_C(0x4)
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source and destination IPv4 addresses of IPv6
- * packets.
+ * This bit must be '1' for the l3_addr field to be
+ * configured.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \
+ UINT32_C(0x8)
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv6 addresses and
- * source/destination ports of TCP/IPv6 packets.
+ * This bit must be '1' for the l3_addr_type field to be
+ * configured.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \
+ UINT32_C(0x10)
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv6 addresses and
- * source/destination ports of UDP/IPv6 packets.
+ * This bit must be '1' for the t_l3_addr_type field to be
+ * configured.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
- /* VNIC ID of VNIC associated with RSS table being configured. */
- uint16_t vnic_id;
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \
+ UINT32_C(0x20)
/*
- * Specifies which VNIC ring table pair to configure.
- * Valid values range from 0 to 7.
+ * This bit must be '1' for the t_l3_addr field to be
+ * configured.
*/
- uint8_t ring_table_pair_index;
- /* Flags to specify different RSS hash modes. */
- uint8_t hash_mode_flags;
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \
+ UINT32_C(0x40)
/*
- * When this bit is '1', it indicates using current RSS
- * hash mode setting configured in the device.
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the vni field to be
+ * configured.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the dst_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x400)
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+ /*
+ * This value sets the match value for the inner L2
+ * MAC address.
+ * Destination MAC address for RX path.
+ * Source MAC address for TX path.
+ */
+ uint8_t l2_addr[6];
+ /*
+ * This value sets VLAN ID value for inner VLAN.
+ * Only 12-bits of VLAN ID are used in setting the filter.
+ */
+ uint16_t l2_ivlan;
+ /*
+ * The value of inner destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t l3_addr[4];
+ /*
+ * The value of tunnel destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t t_l3_addr[4];
+ /*
+ * This value indicates the type of inner IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t l3_addr_type;
+ /*
+ * This value indicates the type of tunnel IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t t_l3_addr_type;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
/*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
- * l4.src, l4.dest} for tunnel packets. For none-tunnel
- * packets, the RSS hash is computed over the normal
- * src/dest l3 and src/dest l4 headers.
+ * tunnel_flags allows the user to indicate the tunnel tag detection
+ * for the tunnel type specified in tunnel_type.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ uint8_t tunnel_flags;
+ /*
+ * If the tunnel_type is geneve, then this bit indicates if we
+ * need to match the geneve OAM packet.
+ * If the tunnel_type is nvgre or gre, then this bit indicates if
+ * we need to detect checksum present bit in geneve header.
+ * If the tunnel_type is mpls, then this bit indicates if we need
+ * to match mpls packet with explicit IPV4/IPV6 null header.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \
+ UINT32_C(0x1)
+ /*
+ * If the tunnel_type is geneve, then this bit indicates if we
+ * need to detect the critical option bit set in the oam packet.
+ * If the tunnel_type is nvgre or gre, then this bit indicates
+ * if we need to match nvgre packets with key present bit set in
+ * gre header.
+ * If the tunnel_type is mpls, then this bit indicates if we
+ * need to match mpls packet with S bit from inner/second label.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \
UINT32_C(0x2)
/*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
- * tunnel packets. For none-tunnel packets, the RSS hash is
- * computed over the normal src/dest l3 headers.
+ * If the tunnel_type is geneve, then this bit indicates if we
+ * need to match geneve packet with extended header bit set in
+ * geneve header.
+ * If the tunnel_type is nvgre or gre, then this bit indicates
+ * if we need to match nvgre packets with sequence number
+ * present bit set in gre header.
+ * If the tunnel_type is mpls, then this bit indicates if we
+ * need to match mpls packet with S bit from out/first label.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \
UINT32_C(0x4)
/*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
- * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
- * packets, the RSS hash is computed over the normal
- * src/dest l3 and src/dest l4 headers.
+ * Virtual Network Identifier (VNI). Only valid with
+ * tunnel_types VXLAN, NVGRE, and Geneve.
+ * Only lower 24-bits of VNI field are used
+ * in setting up the filter.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
- UINT32_C(0x8)
+ uint32_t vni;
+ /* Logical VNIC ID of the destination VNIC. */
+ uint32_t dst_vnic_id;
/*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
- * tunnel packets. For none-tunnel packets, the RSS hash is
- * computed over the normal src/dest l3 headers.
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
- UINT32_C(0x10)
- /* This is the address for rss ring group table */
- uint64_t ring_grp_tbl_addr;
- /* This is the address for rss hash key table */
- uint64_t hash_key_tbl_addr;
- /* Index to the rss indirection table. */
- uint16_t rss_ctx_idx;
- uint8_t unused_1[6];
-} __attribute__((packed));
+ uint32_t mirror_vnic_id;
+} __rte_packed;
-/* hwrm_vnic_rss_cfg_output (size:128b/16B) */
-struct hwrm_vnic_rss_cfg_output {
+/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_tunnel_filter_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t tunnel_filter_id;
+ /*
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
+ */
+ uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**********************
- * hwrm_vnic_rss_qcfg *
- **********************/
+/*******************************
+ * hwrm_cfa_tunnel_filter_free *
+ *******************************/
-/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */
-struct hwrm_vnic_rss_qcfg_input {
+/* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_tunnel_filter_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Index to the rss indirection table. */
- uint16_t rss_ctx_idx;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t tunnel_filter_id;
+} __rte_packed;
-/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */
-struct hwrm_vnic_rss_qcfg_output {
+/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_tunnel_filter_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t hash_type;
- /*
- * When this bit is '1', the RSS hash shall be computed
- * over source and destination IPv4 addresses of IPv4
- * packets.
- */
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
- /*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv4 addresses and
- * source/destination ports of TCP/IPv4 packets.
- */
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ uint8_t unused_0[7];
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv4 addresses and
- * source/destination ports of UDP/IPv4 packets.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ uint8_t valid;
+} __rte_packed;
+
+/***************************************
+ * hwrm_cfa_redirect_tunnel_type_alloc *
+ ***************************************/
+
+
+/* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */
+struct hwrm_cfa_redirect_tunnel_type_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source and destination IPv4 addresses of IPv6
- * packets.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ uint16_t cmpl_ring;
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv6 addresses and
- * source/destination ports of TCP/IPv6 packets.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ uint16_t seq_id;
/*
- * When this bit is '1', the RSS hash shall be computed
- * over source/destination IPv6 addresses and
- * source/destination ports of UDP/IPv6 packets.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
- uint8_t unused_0[4];
- /* This is the value of rss hash key */
- uint32_t hash_key[10];
- /* Flags to specify different RSS hash modes. */
- uint8_t hash_mode_flags;
+ uint16_t target_id;
/*
- * When this bit is '1', it indicates using current RSS
- * hash mode setting configured in the device.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \
+ uint64_t resp_addr;
+ /* The destination function id, to whom the traffic is redirected. */
+ uint16_t dest_fid;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
- /*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
- * l4.src, l4.dest} for tunnel packets. For none-tunnel
- * packets, the RSS hash is computed over the normal
- * src/dest l3 and src/dest l4 headers.
- */
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
- /*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
- * tunnel packets. For none-tunnel packets, the RSS hash is
- * computed over the normal src/dest l3 headers.
- */
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
UINT32_C(0x4)
- /*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
- * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
- * packets, the RSS hash is computed over the normal
- * src/dest l3 and src/dest l4 headers.
- */
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
UINT32_C(0x8)
- /*
- * When this bit is '1', it indicates requesting support of
- * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
- * tunnel packets. For none-tunnel packets, the RSS hash is
- * computed over the normal src/dest l3 headers.
- */
- #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
- UINT32_C(0x10)
- uint8_t unused_1[6];
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ /* Tunnel alloc flags. */
+ uint8_t flags;
+ /* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \
+ UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */
+struct hwrm_cfa_redirect_tunnel_type_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**************************
- * hwrm_vnic_plcmodes_cfg *
- **************************/
+/**************************************
+ * hwrm_cfa_redirect_tunnel_type_free *
+ **************************************/
-/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */
-struct hwrm_vnic_plcmodes_cfg_input {
+/* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */
+struct hwrm_cfa_redirect_tunnel_type_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /*
- * When this bit is '1', the VNIC shall be configured to
- * use regular placement algorithm.
- * By default, the regular placement algorithm shall be
- * enabled on the VNIC.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
+ /* The destination function id, to whom the traffic is redirected. */
+ uint16_t dest_fid;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC shall be configured
- * use the jumbo placement algorithm.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
- /*
- * When this bit is '1', the VNIC shall be configured
- * to enable Header-Data split for IPv4 packets according
- * to the following rules:
- * # If the packet is identified as TCP/IPv4, then the
- * packet is split at the beginning of the TCP payload.
- * # If the packet is identified as UDP/IPv4, then the
- * packet is split at the beginning of UDP payload.
- * # If the packet is identified as non-TCP and non-UDP
- * IPv4 packet, then the packet is split at the beginning
- * of the upper layer protocol header carried in the IPv4
- * packet.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \
UINT32_C(0x4)
- /*
- * When this bit is '1', the VNIC shall be configured
- * to enable Header-Data split for IPv6 packets according
- * to the following rules:
- * # If the packet is identified as TCP/IPv6, then the
- * packet is split at the beginning of the TCP payload.
- * # If the packet is identified as UDP/IPv6, then the
- * packet is split at the beginning of UDP payload.
- * # If the packet is identified as non-TCP and non-UDP
- * IPv6 packet, then the packet is split at the beginning
- * of the upper layer protocol header carried in the IPv6
- * packet.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \
UINT32_C(0x8)
- /*
- * When this bit is '1', the VNIC shall be configured
- * to enable Header-Data split for FCoE packets at the
- * beginning of FC payload.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \
- UINT32_C(0x10)
- /*
- * When this bit is '1', the VNIC shall be configured
- * to enable Header-Data split for RoCE packets at the
- * beginning of RoCE payload (after BTH/GRH headers).
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \
- UINT32_C(0x20)
- uint32_t enables;
- /*
- * This bit must be '1' for the jumbo_thresh_valid field to be
- * configured.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
- UINT32_C(0x1)
- /*
- * This bit must be '1' for the hds_offset_valid field to be
- * configured.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
- UINT32_C(0x2)
- /*
- * This bit must be '1' for the hds_threshold_valid field to be
- * configured.
- */
- #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
- UINT32_C(0x4)
- /* Logical vnic ID */
- uint32_t vnic_id;
- /*
- * When jumbo placement algorithm is enabled, this value
- * is used to determine the threshold for jumbo placement.
- * Packets with length larger than this value will be
- * placed according to the jumbo placement algorithm.
- */
- uint16_t jumbo_thresh;
- /*
- * This value is used to determine the offset into
- * packet buffer where the split data (payload) will be
- * placed according to one of of HDS placement algorithm.
- *
- * The lengths of packet buffers provided for split data
- * shall be larger than this value.
- */
- uint16_t hds_offset;
- /*
- * When one of the HDS placement algorithm is enabled, this
- * value is used to determine the threshold for HDS
- * placement.
- * Packets with length larger than this value will be
- * placed according to the HDS placement algorithm.
- * This value shall be in multiple of 4 bytes.
- */
- uint16_t hds_threshold;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0[5];
+} __rte_packed;
-/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */
-struct hwrm_vnic_plcmodes_cfg_output {
+/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */
+struct hwrm_cfa_redirect_tunnel_type_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***************************
- * hwrm_vnic_plcmodes_qcfg *
- ***************************/
+/**************************************
+ * hwrm_cfa_redirect_tunnel_type_info *
+ **************************************/
-/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */
-struct hwrm_vnic_plcmodes_qcfg_input {
+/* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */
+struct hwrm_cfa_redirect_tunnel_type_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Logical vnic ID */
- uint32_t vnic_id;
- uint8_t unused_0[4];
-} __attribute__((packed));
+ /* The source function id. */
+ uint16_t src_fid;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0[5];
+} __rte_packed;
-/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */
-struct hwrm_vnic_plcmodes_qcfg_output {
+/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */
+struct hwrm_cfa_redirect_tunnel_type_info_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /*
- * When this bit is '1', the VNIC is configured to
- * use regular placement algorithm.
- */
- #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
- UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC is configured to
- * use the jumbo placement algorithm.
- */
- #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
- UINT32_C(0x2)
- /*
- * When this bit is '1', the VNIC is configured
- * to enable Header-Data split for IPv4 packets.
- */
- #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \
- UINT32_C(0x4)
- /*
- * When this bit is '1', the VNIC is configured
- * to enable Header-Data split for IPv6 packets.
- */
- #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \
- UINT32_C(0x8)
- /*
- * When this bit is '1', the VNIC is configured
- * to enable Header-Data split for FCoE packets.
- */
- #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \
- UINT32_C(0x10)
- /*
- * When this bit is '1', the VNIC is configured
- * to enable Header-Data split for RoCE packets.
- */
- #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \
- UINT32_C(0x20)
- /*
- * When this bit is '1', the VNIC is configured
- * to be the default VNIC of the requesting function.
- */
- #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \
- UINT32_C(0x40)
- /*
- * When jumbo placement algorithm is enabled, this value
- * is used to determine the threshold for jumbo placement.
- * Packets with length larger than this value will be
- * placed according to the jumbo placement algorithm.
- */
- uint16_t jumbo_thresh;
- /*
- * This value is used to determine the offset into
- * packet buffer where the split data (payload) will be
- * placed according to one of of HDS placement algorithm.
- *
- * The lengths of packet buffers provided for split data
- * shall be larger than this value.
- */
- uint16_t hds_offset;
- /*
- * When one of the HDS placement algorithm is enabled, this
- * value is used to determine the threshold for HDS
- * placement.
- * Packets with length larger than this value will be
- * placed according to the HDS placement algorithm.
- * This value shall be in multiple of 4 bytes.
- */
- uint16_t hds_threshold;
+ /* The destination function id, to whom the traffic is redirected. */
+ uint16_t dest_fid;
uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**********************************
- * hwrm_vnic_rss_cos_lb_ctx_alloc *
- **********************************/
+/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */
+struct hwrm_vxlan_ipv4_hdr {
+ /* IPv4 version and header length. */
+ uint8_t ver_hlen;
+ /* IPv4 header length */
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf)
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0
+ /* Version */
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK UINT32_C(0xf0)
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT 4
+ /* IPv4 type of service. */
+ uint8_t tos;
+ /* IPv4 identification. */
+ uint16_t ip_id;
+ /* IPv4 flags and offset. */
+ uint16_t flags_frag_offset;
+ /* IPv4 TTL. */
+ uint8_t ttl;
+ /* IPv4 protocol. */
+ uint8_t protocol;
+ /* IPv4 source address. */
+ uint32_t src_ip_addr;
+ /* IPv4 destination address. */
+ uint32_t dest_ip_addr;
+} __rte_packed;
+/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */
+struct hwrm_vxlan_ipv6_hdr {
+ /* IPv6 version, traffic class and flow label. */
+ uint32_t ver_tc_flow_label;
+ /* IPv6 version shift */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \
+ UINT32_C(0x1c)
+ /* IPv6 version mask */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \
+ UINT32_C(0xf0000000)
+ /* IPv6 TC shift */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \
+ UINT32_C(0x14)
+ /* IPv6 TC mask */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \
+ UINT32_C(0xff00000)
+ /* IPv6 flow label shift */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \
+ UINT32_C(0x0)
+ /* IPv6 flow label mask */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \
+ UINT32_C(0xfffff)
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \
+ HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK
+ /* IPv6 payload length. */
+ uint16_t payload_len;
+ /* IPv6 next header. */
+ uint8_t next_hdr;
+ /* IPv6 TTL. */
+ uint8_t ttl;
+ /* IPv6 source address. */
+ uint32_t src_ip_addr[4];
+ /* IPv6 destination address. */
+ uint32_t dest_ip_addr[4];
+} __rte_packed;
-/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+/* hwrm_cfa_encap_data_vxlan (size:640b/80B) */
+struct hwrm_cfa_encap_data_vxlan {
+ /* Source MAC address. */
+ uint8_t src_mac_addr[6];
+ /* reserved. */
+ uint16_t unused_0;
+ /* Destination MAC address. */
+ uint8_t dst_mac_addr[6];
+ /* Number of VLAN tags. */
+ uint8_t num_vlan_tags;
+ /* reserved. */
+ uint8_t unused_1;
+ /* Outer VLAN TPID. */
+ uint16_t ovlan_tpid;
+ /* Outer VLAN TCI. */
+ uint16_t ovlan_tci;
+ /* Inner VLAN TPID. */
+ uint16_t ivlan_tpid;
+ /* Inner VLAN TCI. */
+ uint16_t ivlan_tci;
+ /* L3 header fields. */
+ uint32_t l3[10];
+ /* IP version mask. */
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf)
+ /* IP version 4. */
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4)
+ /* IP version 6. */
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6)
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \
+ HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6
+ /* UDP source port. */
+ uint16_t src_port;
+ /* UDP destination port. */
+ uint16_t dst_port;
+ /* VXLAN Network Identifier. */
+ uint32_t vni;
+ /* 3 bytes VXLAN header reserve fields from 1st dword of the VXLAN header. */
+ uint8_t hdr_rsvd0[3];
+ /* 1 byte VXLAN header reserve field from 2nd dword of the VXLAN header. */
+ uint8_t hdr_rsvd1;
+ /* VXLAN header flags field. */
+ uint8_t hdr_flags;
+ uint8_t unused[3];
+} __rte_packed;
+
+/*******************************
+ * hwrm_cfa_encap_record_alloc *
+ *******************************/
+
+
+/* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */
+struct hwrm_cfa_encap_record_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+ uint32_t flags;
+ /* Setting of this flag indicates the applicability to the loopback path. */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \
+ UINT32_C(0x1)
+ /*
+ * Setting of this flag indicates this encap record is external encap record.
+ * Resetting of this flag indicates this flag is internal encap record and
+ * this is the default setting.
+ */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_EXTERNAL \
+ UINT32_C(0x2)
+ /* Encapsulation Type. */
+ uint8_t encap_type;
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* VLAN */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \
+ HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6
+ uint8_t unused_0[3];
+ /* This value is encap data used for the given encap type. */
+ uint32_t encap_data[20];
+} __rte_packed;
-/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
+/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */
+struct hwrm_cfa_encap_record_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* rss_cos_lb_ctx_id is 16 b */
- uint16_t rss_cos_lb_ctx_id;
- uint8_t unused_0[5];
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t encap_record_id;
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*********************************
- * hwrm_vnic_rss_cos_lb_ctx_free *
- *********************************/
+/******************************
+ * hwrm_cfa_encap_record_free *
+ ******************************/
-/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */
-struct hwrm_vnic_rss_cos_lb_ctx_free_input {
+/* hwrm_cfa_encap_record_free_input (size:192b/24B) */
+struct hwrm_cfa_encap_record_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* rss_cos_lb_ctx_id is 16 b */
- uint16_t rss_cos_lb_ctx_id;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t encap_record_id;
+ uint8_t unused_0[4];
+} __rte_packed;
-/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */
-struct hwrm_vnic_rss_cos_lb_ctx_free_output {
+/* hwrm_cfa_encap_record_free_output (size:128b/16B) */
+struct hwrm_cfa_encap_record_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************
- * hwrm_ring_alloc *
- *******************/
+/********************************
+ * hwrm_cfa_ntuple_filter_alloc *
+ ********************************/
-/* hwrm_ring_alloc_input (size:704b/88B) */
-struct hwrm_ring_alloc_input {
+/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */
+struct hwrm_cfa_ntuple_filter_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint32_t flags;
+ /* Setting of this flag indicates the applicability to the loopback path. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+ UINT32_C(0x1)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \
+ UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates that a meter is expected to be attached
+ * to this flow. This hint can be used when choosing the action record
+ * format required for the flow.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
+ UINT32_C(0x4)
+ /*
+ * Setting of this flag indicates that the dst_id field contains function ID.
+ * If this is not set it indicates dest_id is VNIC or VPORT.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \
+ UINT32_C(0x8)
+ /*
+ * Setting of this flag indicates match on arp reply when ethertype is 0x0806.
+ * If this is not set it indicates no specific arp opcode matching.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_ARP_REPLY \
+ UINT32_C(0x10)
+ /*
+ * Setting of this flag indicates that the dst_id field contains RFS ring
+ * table index. If this is not set it indicates dst_id is VNIC or VPORT
+ * or function ID. Note dest_fid and dest_rfs_ring_idx can’t be set at
+ * the same time.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_RFS_RING_IDX \
+ UINT32_C(0x20)
uint32_t enables;
/*
- * This bit must be '1' for the ring_arb_cfg field to be
+ * This bit must be '1' for the l2_filter_id field to be
* configured.
*/
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the ethertype field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
UINT32_C(0x2)
/*
- * This bit must be '1' for the stat_ctx_id_valid field to be
+ * This bit must be '1' for the tunnel_type field to be
* configured.
*/
- #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the src_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
UINT32_C(0x8)
/*
- * This bit must be '1' for the max_bw_valid field to be
+ * This bit must be '1' for the ipaddr_type field to be
* configured.
*/
- #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the src_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
UINT32_C(0x20)
/*
- * This bit must be '1' for the rx_ring_id field to be
+ * This bit must be '1' for the src_ipaddr_mask field to be
* configured.
*/
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \
UINT32_C(0x40)
/*
- * This bit must be '1' for the nq_ring_id field to be
+ * This bit must be '1' for the dst_ipaddr field to be
* configured.
*/
- #define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
UINT32_C(0x80)
/*
- * This bit must be '1' for the rx_buf_size field to be
+ * This bit must be '1' for the dst_ipaddr_mask field to be
* configured.
*/
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \
UINT32_C(0x100)
- /* Ring Type. */
- uint8_t ring_type;
- /* L2 Completion Ring (CR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
- /* RoCE Notification Completion Ring (ROCE_CR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
- /* RX Aggregation Ring */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
- /* Notification Queue */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ UINT32_C(0x5)
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \
- HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ
- uint8_t unused_0;
- /* Ring allocation flags. */
- uint16_t flags;
/*
- * For Rx rings, the incoming packet data can be placed at either
- * a 0B or 2B offset from the start of the Rx packet buffer. When
- * '1', the received packet will be padded with 2B of zeros at the
- * front of the packet. Note that this flag is only used for
- * Rx rings and is ignored for all other rings included Rx
- * Aggregation rings.
+ * This bit must be '1' for the ip_protocol field to be
+ * configured.
*/
- #define HWRM_RING_ALLOC_INPUT_FLAGS_RX_SOP_PAD UINT32_C(0x1)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ UINT32_C(0x200)
/*
- * This value is a pointer to the page table for the
- * Ring.
+ * This bit must be '1' for the src_port field to be
+ * configured.
*/
- uint64_t page_tbl_addr;
- /* First Byte Offset of the first entry in the first page. */
- uint32_t fbo;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
+ UINT32_C(0x400)
/*
- * Actual page size in 2^page_size. The supported range is increments
- * in powers of 2 from 16 bytes to 1GB.
- * - 4 = 16 B
- * Page size is 16 B.
- * - 12 = 4 KB
- * Page size is 4 KB.
- * - 13 = 8 KB
- * Page size is 8 KB.
- * - 16 = 64 KB
- * Page size is 64 KB.
- * - 21 = 2 MB
- * Page size is 2 MB.
- * - 22 = 4 MB
- * Page size is 4 MB.
- * - 30 = 1 GB
- * Page size is 1 GB.
+ * This bit must be '1' for the src_port_mask field to be
+ * configured.
*/
- uint8_t page_size;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \
+ UINT32_C(0x800)
/*
- * This value indicates the depth of page table.
- * For this version of the specification, value other than 0 or
- * 1 shall be considered as an invalid value.
- * When the page_tbl_depth = 0, then it is treated as a
- * special case with the following.
- * 1. FBO and page size fields are not valid.
- * 2. page_tbl_addr is the physical address of the first
- * element of the ring.
+ * This bit must be '1' for the dst_port field to be
+ * configured.
*/
- uint8_t page_tbl_depth;
- uint8_t unused_1[2];
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
+ UINT32_C(0x1000)
/*
- * Number of 16B units in the ring. Minimum size for
- * a ring is 16 16B entries.
+ * This bit must be '1' for the dst_port_mask field to be
+ * configured.
*/
- uint32_t length;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \
+ UINT32_C(0x2000)
/*
- * Logical ring number for the ring to be allocated.
- * This value determines the position in the doorbell
- * area where the update to the ring will be made.
- *
- * For completion rings, this value is also the MSI-X
- * vector number for the function the completion ring is
- * associated with.
+ * This bit must be '1' for the pri_hint field to be
+ * configured.
*/
- uint16_t logical_id;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \
+ UINT32_C(0x4000)
/*
- * This field is used only when ring_type is a TX ring.
- * This value indicates what completion ring the TX ring
- * is associated with.
+ * This bit must be '1' for the ntuple_filter_id field to be
+ * configured.
*/
- uint16_t cmpl_ring_id;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \
+ UINT32_C(0x8000)
/*
- * This field is used only when ring_type is a TX ring.
- * This value indicates what CoS queue the TX ring
- * is associated with.
+ * This bit must be '1' for the dst_id field to be
+ * configured.
*/
- uint16_t queue_id;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x10000)
/*
- * When allocating a Rx ring or Rx aggregation ring, this field
- * specifies the size of the buffer descriptors posted to the ring.
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
*/
- uint16_t rx_buf_size;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x20000)
/*
- * When allocating an Rx aggregation ring, this field
- * specifies the associated Rx ring ID.
+ * This bit must be '1' for the dst_macaddr field to be
+ * configured.
*/
- uint16_t rx_ring_id;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
+ UINT32_C(0x40000)
+ /* This flag is deprecated. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_RFS_RING_TBL_IDX \
+ UINT32_C(0x80000)
/*
- * When allocating a completion ring, this field
- * specifies the associated NQ ring ID.
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
*/
- uint16_t nq_ring_id;
+ uint64_t l2_filter_id;
/*
- * This field is used only when ring_type is a TX ring.
- * This field is used to configure arbitration related
- * parameters for a TX ring.
+ * This value indicates the source MAC address in
+ * the Ethernet header.
*/
- uint16_t ring_arb_cfg;
- /* Arbitration policy used for the ring. */
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
- UINT32_C(0xf)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
+ uint8_t src_macaddr[6];
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint16_t ethertype;
/*
- * Use strict priority for the TX ring.
- * Priority value is specified in arb_policy_param
+ * This value indicates the type of IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
*/
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
+ uint8_t ip_addr_type;
+ /* invalid */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
+ UINT32_C(0x0)
+ /* IPv4 */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
+ UINT32_C(0x4)
+ /* IPv6 */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
+ UINT32_C(0x6)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ /*
+ * The value of protocol filed in IP header.
+ * Applies to UDP and TCP traffic.
+ * 6 - TCP
+ * 17 - UDP
+ */
+ uint8_t ip_protocol;
+ /* invalid */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
+ UINT32_C(0x0)
+ /* TCP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
+ UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
+ UINT32_C(0x11)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
+ */
+ uint16_t dst_id;
+ /*
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint16_t mirror_vnic_id;
+ /*
+ * This value indicates the tunnel type for this filter.
+ * If this field is not specified, then the filter shall
+ * apply to both non-tunneled and tunneled packets.
+ * If this field conflicts with the tunnel_type specified
+ * in the l2_filter_id, then the HWRM shall return an
+ * error for this command.
+ */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
/*
- * Use weighted fair queue arbitration for the TX ring.
- * Weight is specified in arb_policy_param
+ * This hint is provided to help in placing
+ * the filter in the filter table.
*/
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
+ uint8_t pri_hint;
+ /* No preference */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+ UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \
+ UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \
UINT32_C(0x2)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
- HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
- /* Reserved field. */
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \
- UINT32_C(0xf0)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4
+ /* As high as possible */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \
+ UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \
+ UINT32_C(0x4)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST
/*
- * Arbitration policy specific parameter.
- * # For strict priority arbitration policy, this field
- * represents a priority value. If set to 0, then the priority
- * is not specified and the HWRM is allowed to select
- * any priority for this TX ring.
- * # For weighted fair queue arbitration policy, this field
- * represents a weight value. If set to 0, then the weight
- * is not specified and the HWRM is allowed to select
- * any weight for this TX ring.
+ * The value of source IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
*/
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
- UINT32_C(0xff00)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
- uint16_t unused_3;
+ uint32_t src_ipaddr[4];
/*
- * This field is reserved for the future use.
- * It shall be set to 0.
+ * The value of source IP address mask to be used in
+ * filtering.
+ * For IPv4, first four bytes represent the IP address mask.
*/
- uint32_t reserved3;
+ uint32_t src_ipaddr_mask[4];
/*
- * This field is used only when ring_type is a TX ring.
- * This input indicates what statistics context this ring
- * should be associated with.
+ * The value of destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
*/
- uint32_t stat_ctx_id;
+ uint32_t dst_ipaddr[4];
/*
- * This field is reserved for the future use.
- * It shall be set to 0.
+ * The value of destination IP address mask to be used in
+ * filtering.
+ * For IPv4, first four bytes represent the IP address mask.
*/
- uint32_t reserved4;
+ uint32_t dst_ipaddr_mask[4];
/*
- * This field is used only when ring_type is a TX ring
- * to specify maximum BW allocated to the TX ring.
- * The HWRM will translate this value into byte counter and
- * time interval used for this ring inside the device.
+ * The value of source port to be used in filtering.
+ * Applies to UDP and TCP traffic.
*/
- uint32_t max_bw;
- /* The bandwidth value. */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
- HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
- HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ uint16_t src_port;
/*
- * This field is used only when ring_type is a Completion ring.
- * This value indicates what interrupt mode should be used
- * on this completion ring.
- * Note: In the legacy interrupt mode, no more than 16
- * completion rings are allowed.
+ * The value of source port mask to be used in filtering.
+ * Applies to UDP and TCP traffic.
*/
- uint8_t int_mode;
- /* Legacy INTA */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
- /* Reserved */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
- /* MSI-X */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
- /* No Interrupt - Polled mode */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
- HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
- uint8_t unused_4[3];
+ uint16_t src_port_mask;
/*
- * The cq_handle is specified when allocating a completion ring. For
- * devices that support NQs, this cq_handle will be included in the
- * NQE to specify which CQ should be read to retrieve the completion
- * record.
+ * The value of destination port to be used in filtering.
+ * Applies to UDP and TCP traffic.
*/
- uint64_t cq_handle;
-} __attribute__((packed));
+ uint16_t dst_port;
+ /*
+ * The value of destination port mask to be used in
+ * filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t dst_port_mask;
+ /*
+ * This is the ID of the filter that goes along with
+ * the pri_hint.
+ */
+ uint64_t ntuple_filter_id_hint;
+} __rte_packed;
-/* hwrm_ring_alloc_output (size:128b/16B) */
-struct hwrm_ring_alloc_output {
+/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_ntuple_filter_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t ntuple_filter_id;
/*
- * Physical number of ring allocated.
- * This value shall be unique for a ring type.
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
+ */
+ uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
*/
- uint16_t ring_id;
- /* Logical number of ring allocated. */
- uint16_t logical_ring_id;
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************
- * hwrm_ring_free *
- ******************/
+/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */
+struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /* Unable to complete operation due to conflict with Rx Mask VLAN */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
+ UINT32_C(0x1)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/*******************************
+ * hwrm_cfa_ntuple_filter_free *
+ *******************************/
-/* hwrm_ring_free_input (size:192b/24B) */
-struct hwrm_ring_free_input {
+/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_ntuple_filter_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Ring Type. */
- uint8_t ring_type;
- /* L2 Completion Ring (CR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
- /* RoCE Notification Completion Ring (ROCE_CR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
- /* RX Aggregation Ring */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
- /* Notification Queue */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5)
- #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
- HWRM_RING_FREE_INPUT_RING_TYPE_NQ
- uint8_t unused_0;
- /* Physical number of ring allocated. */
- uint16_t ring_id;
- uint8_t unused_1[4];
-} __attribute__((packed));
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t ntuple_filter_id;
+} __rte_packed;
-/* hwrm_ring_free_output (size:128b/16B) */
-struct hwrm_ring_free_output {
+/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_ntuple_filter_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************
- * hwrm_ring_reset *
- *******************/
+/******************************
+ * hwrm_cfa_ntuple_filter_cfg *
+ ******************************/
-/* hwrm_ring_reset_input (size:192b/24B) */
-struct hwrm_ring_reset_input {
+/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */
+struct hwrm_cfa_ntuple_filter_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Ring Type. */
- uint8_t ring_type;
- /* L2 Completion Ring (CR) */
- #define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
- #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
- #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2)
- /* RoCE Notification Completion Ring (ROCE_CR) */
- #define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
- #define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \
- HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL
- uint8_t unused_0;
- /* Physical number of the ring. */
- uint16_t ring_id;
- uint8_t unused_1[4];
-} __attribute__((packed));
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the new_dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the new_meter_instance_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
+ UINT32_C(0x4)
+ uint32_t flags;
+ /*
+ * Setting this bit to 1 indicates that dest_id field contains FID.
+ * Setting this to 0 indicates that dest_id field contains VNIC or VPORT.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \
+ UINT32_C(0x1)
+ /*
+ * Setting of this flag indicates that the new_dst_id field contains
+ * RFS ring table index. If this is not set it indicates new_dst_id is
+ * VNIC or VPORT or function ID. Note dest_fid and dest_rfs_ring_idx
+ * can’t be set at the same time.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_RFS_RING_IDX \
+ UINT32_C(0x2)
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t ntuple_filter_id;
+ /*
+ * If set, this value shall represent the new
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and new network port id of the destination port for
+ * the TX path.
+ */
+ uint32_t new_dst_id;
+ /*
+ * New Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint32_t new_mirror_vnic_id;
+ /*
+ * New meter to attach to the flow. Specifying the
+ * invalid instance ID is used to remove any existing
+ * meter from the flow.
+ */
+ uint16_t new_meter_instance_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
+ uint8_t unused_1[6];
+} __rte_packed;
-/* hwrm_ring_reset_output (size:128b/16B) */
-struct hwrm_ring_reset_output {
+/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_ntuple_filter_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[4];
- /* Position of consumer index after ring reset completes. */
- uint8_t consumer_idx[3];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
- * hwrm_ring_aggint_qcaps *
+ * hwrm_cfa_em_flow_alloc *
**************************/
-/* hwrm_ring_aggint_qcaps_input (size:128b/16B) */
-struct hwrm_ring_aggint_qcaps_input {
+/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */
+struct hwrm_cfa_em_flow_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
-
-/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */
-struct hwrm_ring_aggint_qcaps_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- uint32_t cmpl_params;
+ uint32_t flags;
/*
- * When this bit is set to '1', int_lat_tmr_min can be configured
- * on completion rings.
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MIN \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates enabling of a byte counter for a given
+ * flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates enabling of a packet counter for a given
+ * flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4)
+ /* Setting of this flag indicates de-capsulation action for the given flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8)
+ /* Setting of this flag indicates encapsulation action for the given flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20)
+ /*
+ * Setting of this flag indicates that a meter is expected to be attached
+ * to this flow. This hint can be used when choosing the action record
+ * format required for the flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the l2_filter_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
UINT32_C(0x1)
/*
- * When this bit is set to '1', int_lat_tmr_max can be configured
- * on completion rings.
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MAX \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
UINT32_C(0x2)
/*
- * When this bit is set to '1', timer_reset can be enabled
- * on completion rings.
+ * This bit must be '1' for the tunnel_id field to be
+ * configured.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_TIMER_RESET \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \
UINT32_C(0x4)
/*
- * When this bit is set to '1', ring_idle can be enabled
- * on completion rings.
+ * This bit must be '1' for the src_macaddr field to be
+ * configured.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_RING_IDLE \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \
UINT32_C(0x8)
/*
- * When this bit is set to '1', num_cmpl_dma_aggr can be configured
- * on completion rings.
+ * This bit must be '1' for the dst_macaddr field to be
+ * configured.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \
UINT32_C(0x10)
/*
- * When this bit is set to '1', num_cmpl_dma_aggr_during_int can be configured
- * on completion rings.
+ * This bit must be '1' for the ovlan_vid field to be
+ * configured.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR_DURING_INT \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \
UINT32_C(0x20)
/*
- * When this bit is set to '1', cmpl_aggr_dma_tmr can be configured
- * on completion rings.
+ * This bit must be '1' for the ivlan_vid field to be
+ * configured.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \
UINT32_C(0x40)
/*
- * When this bit is set to '1', cmpl_aggr_dma_tmr_during_int can be configured
- * on completion rings.
+ * This bit must be '1' for the ethertype field to be
+ * configured.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR_DURING_INT \
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \
UINT32_C(0x80)
/*
- * When this bit is set to '1', num_cmpl_aggr_int can be configured
- * on completion rings.
+ * This bit must be '1' for the src_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the dst_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the ipaddr_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the ip_protocol field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the src_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the dst_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the encap_record_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the meter_instance_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \
+ UINT32_C(0x20000)
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0[3];
+ /*
+ * Tunnel identifier.
+ * Virtual Network Identifier (VNI). Only valid with
+ * tunnel_types VXLAN, NVGRE, and Geneve.
+ * Only lower 24-bits of VNI field are used
+ * in setting up the filter.
+ */
+ uint32_t tunnel_id;
+ /*
+ * This value indicates the source MAC address in
+ * the Ethernet header.
+ */
+ uint8_t src_macaddr[6];
+ /* The meter instance to attach to the flow. */
+ uint16_t meter_instance_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID
+ /*
+ * This value indicates the destination MAC address in
+ * the Ethernet header.
+ */
+ uint8_t dst_macaddr[6];
+ /*
+ * This value indicates the VLAN ID of the outer VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ovlan_vid;
+ /*
+ * This value indicates the VLAN ID of the inner VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ivlan_vid;
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint16_t ethertype;
+ /*
+ * This value indicates the type of IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t ip_addr_type;
+ /* invalid */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
+ /* IPv4 */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4)
+ /* IPv6 */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ /*
+ * The value of protocol filed in IP header.
+ * Applies to UDP and TCP traffic.
+ * 6 - TCP
+ * 17 - UDP
+ */
+ uint8_t ip_protocol;
+ /* invalid */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
+ /* TCP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP
+ uint8_t unused_1[2];
+ /*
+ * The value of source IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t src_ipaddr[4];
+ /*
+ * big_endian = True
+ * The value of destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t dst_ipaddr[4];
+ /*
+ * The value of source port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t src_port;
+ /*
+ * The value of destination port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t dst_port;
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
+ */
+ uint16_t dst_id;
+ /*
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint16_t mirror_vnic_id;
+ /* Logical ID of the encapsulation record. */
+ uint32_t encap_record_id;
+ uint8_t unused_2[4];
+} __rte_packed;
+
+/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */
+struct hwrm_cfa_em_flow_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t em_filter_id;
+ /*
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
+ */
+ uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_AGGR_INT \
- UINT32_C(0x100)
- uint32_t nq_params;
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
/*
- * When this bit is set to '1', int_lat_tmr_min can be configured
- * on notification queues.
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
*/
- #define HWRM_RING_AGGINT_QCAPS_OUTPUT_NQ_PARAMS_INT_LAT_TMR_MIN \
- UINT32_C(0x1)
- /* Minimum value for num_cmpl_dma_aggr */
- uint16_t num_cmpl_dma_aggr_min;
- /* Maximum value for num_cmpl_dma_aggr */
- uint16_t num_cmpl_dma_aggr_max;
- /* Minimum value for num_cmpl_dma_aggr_during_int */
- uint16_t num_cmpl_dma_aggr_during_int_min;
- /* Maximum value for num_cmpl_dma_aggr_during_int */
- uint16_t num_cmpl_dma_aggr_during_int_max;
- /* Minimum value for cmpl_aggr_dma_tmr */
- uint16_t cmpl_aggr_dma_tmr_min;
- /* Maximum value for cmpl_aggr_dma_tmr */
- uint16_t cmpl_aggr_dma_tmr_max;
- /* Minimum value for cmpl_aggr_dma_tmr_during_int */
- uint16_t cmpl_aggr_dma_tmr_during_int_min;
- /* Maximum value for cmpl_aggr_dma_tmr_during_int */
- uint16_t cmpl_aggr_dma_tmr_during_int_max;
- /* Minimum value for int_lat_tmr_min */
- uint16_t int_lat_tmr_min_min;
- /* Maximum value for int_lat_tmr_min */
- uint16_t int_lat_tmr_min_max;
- /* Minimum value for int_lat_tmr_max */
- uint16_t int_lat_tmr_max_min;
- /* Maximum value for int_lat_tmr_max */
- uint16_t int_lat_tmr_max_max;
- /* Minimum value for num_cmpl_aggr_int */
- uint16_t num_cmpl_aggr_int_min;
- /* Maximum value for num_cmpl_aggr_int */
- uint16_t num_cmpl_aggr_int_max;
- /* The units for timer parameters, in nanoseconds. */
- uint16_t timer_units;
- uint8_t unused_0[1];
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**************************************
- * hwrm_ring_cmpl_ring_qaggint_params *
- **************************************/
+/*************************
+ * hwrm_cfa_em_flow_free *
+ *************************/
-/* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */
-struct hwrm_ring_cmpl_ring_qaggint_params_input {
+/* hwrm_cfa_em_flow_free_input (size:192b/24B) */
+struct hwrm_cfa_em_flow_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Physical number of completion ring. */
- uint16_t ring_id;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t em_filter_id;
+} __rte_packed;
-/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */
-struct hwrm_ring_cmpl_ring_qaggint_params_output {
+/* hwrm_cfa_em_flow_free_output (size:128b/16B) */
+struct hwrm_cfa_em_flow_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint16_t flags;
- /*
- * When this bit is set to '1', interrupt max
- * timer is reset whenever a completion is received.
- */
- #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \
- UINT32_C(0x1)
- /*
- * When this bit is set to '1', ring idle mode
- * aggregation will be enabled.
- */
- #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \
- UINT32_C(0x2)
- /*
- * Number of completions to aggregate before DMA
- * during the normal mode.
- */
- uint16_t num_cmpl_dma_aggr;
- /*
- * Number of completions to aggregate before DMA
- * during the interrupt mode.
- */
- uint16_t num_cmpl_dma_aggr_during_int;
- /*
- * Timer in unit of 80-nsec used to aggregate completions before
- * DMA during the normal mode (not in interrupt mode).
- */
- uint16_t cmpl_aggr_dma_tmr;
- /*
- * Timer in unit of 80-nsec used to aggregate completions before
- * DMA during the interrupt mode.
- */
- uint16_t cmpl_aggr_dma_tmr_during_int;
- /* Minimum time (in unit of 80-nsec) between two interrupts. */
- uint16_t int_lat_tmr_min;
- /*
- * Maximum wait time (in unit of 80-nsec) spent aggregating
- * completions before signaling the interrupt after the
- * interrupt is enabled.
- */
- uint16_t int_lat_tmr_max;
- /*
- * Minimum number of completions aggregated before signaling
- * an interrupt.
- */
- uint16_t num_cmpl_aggr_int;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*****************************************
- * hwrm_ring_cmpl_ring_cfg_aggint_params *
- *****************************************/
+/************************
+ * hwrm_cfa_meter_qcaps *
+ ************************/
-/* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */
-struct hwrm_ring_cmpl_ring_cfg_aggint_params_input {
+/* hwrm_cfa_meter_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_meter_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Physical number of completion ring. */
- uint16_t ring_id;
- uint16_t flags;
- /*
- * When this bit is set to '1', interrupt latency max
- * timer is reset whenever a completion is received.
- */
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \
- UINT32_C(0x1)
- /*
- * When this bit is set to '1', ring idle mode
- * aggregation will be enabled.
- */
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \
- UINT32_C(0x2)
- /*
- * Set this flag to 1 when configuring parameters on a
- * notification queue. Set this flag to 0 when configuring
- * parameters on a completion queue.
- */
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \
- UINT32_C(0x4)
- /*
- * Number of completions to aggregate before DMA
- * during the normal mode.
- */
- uint16_t num_cmpl_dma_aggr;
- /*
- * Number of completions to aggregate before DMA
- * during the interrupt mode.
- */
- uint16_t num_cmpl_dma_aggr_during_int;
- /*
- * Timer in unit of 80-nsec used to aggregate completions before
- * DMA during the normal mode (not in interrupt mode).
- */
- uint16_t cmpl_aggr_dma_tmr;
- /*
- * Timer in unit of 80-nsec used to aggregate completions before
- * DMA during the interrupt mode.
- */
- uint16_t cmpl_aggr_dma_tmr_during_int;
- /* Minimum time (in unit of 80-nsec) between two interrupts. */
- uint16_t int_lat_tmr_min;
+} __rte_packed;
+
+/* hwrm_cfa_meter_qcaps_output (size:320b/40B) */
+struct hwrm_cfa_meter_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
/*
- * Maximum wait time (in unit of 80-nsec) spent aggregating
- * cmpls before signaling the interrupt after the
- * interrupt is enabled.
+ * Enumeration denoting the clock at which the Meter is running with.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
*/
- uint16_t int_lat_tmr_max;
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_MASK UINT32_C(0xf)
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_SFT 0
+ /* 375 MHz */
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_375MHZ UINT32_C(0x0)
+ /* 625 MHz */
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ UINT32_C(0x1)
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_LAST \
+ HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ
+ uint8_t unused_0[4];
/*
- * Minimum number of completions aggregated before signaling
- * an interrupt.
+ * The minimum guaranteed number of tx meter profiles supported
+ * for this function.
*/
- uint16_t num_cmpl_aggr_int;
+ uint16_t min_tx_profile;
/*
- * Bitfield that indicates which parameters are to be applied. Only
- * required when configuring devices with notification queues, and
- * used in that case to set certain parameters on completion queues
- * and others on notification queues.
+ * The maximum non-guaranteed number of tx meter profiles supported
+ * for this function.
*/
- uint16_t enables;
+ uint16_t max_tx_profile;
/*
- * This bit must be '1' for the num_cmpl_dma_aggr field to be
- * configured.
+ * The minimum guaranteed number of rx meter profiles supported
+ * for this function.
*/
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \
- UINT32_C(0x1)
+ uint16_t min_rx_profile;
/*
- * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be
- * configured.
+ * The maximum non-guaranteed number of rx meter profiles supported
+ * for this function.
*/
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \
- UINT32_C(0x2)
+ uint16_t max_rx_profile;
/*
- * This bit must be '1' for the cmpl_aggr_dma_tmr field to be
- * configured.
+ * The minimum guaranteed number of tx meter instances supported
+ * for this function.
*/
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \
- UINT32_C(0x4)
+ uint16_t min_tx_instance;
/*
- * This bit must be '1' for the int_lat_tmr_min field to be
- * configured.
+ * The maximum non-guaranteed number of tx meter instances supported
+ * for this function.
*/
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \
- UINT32_C(0x8)
+ uint16_t max_tx_instance;
/*
- * This bit must be '1' for the int_lat_tmr_max field to be
- * configured.
+ * The minimum guaranteed number of rx meter instances supported
+ * for this function.
*/
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \
- UINT32_C(0x10)
+ uint16_t min_rx_instance;
/*
- * This bit must be '1' for the num_cmpl_aggr_int field to be
- * configured.
+ * The maximum non-guaranteed number of rx meter instances supported
+ * for this function.
*/
- #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \
- UINT32_C(0x20)
- uint8_t unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */
-struct hwrm_ring_cmpl_ring_cfg_aggint_params_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- uint8_t unused_0[7];
+ uint16_t max_rx_instance;
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***********************
- * hwrm_ring_grp_alloc *
- ***********************/
+/********************************
+ * hwrm_cfa_meter_profile_alloc *
+ ********************************/
-/* hwrm_ring_grp_alloc_input (size:192b/24B) */
-struct hwrm_ring_grp_alloc_input {
+/* hwrm_cfa_meter_profile_alloc_input (size:320b/40B) */
+struct hwrm_cfa_meter_profile_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint8_t flags;
/*
- * This value identifies the CR associated with the ring
- * group.
- */
- uint16_t cr;
- /*
- * This value identifies the main RR associated with the ring
- * group.
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
*/
- uint16_t rr;
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX
+ /* The meter algorithm type. */
+ uint8_t meter_type;
+ /* RFC 2697 (srTCM) */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2697 \
+ UINT32_C(0x0)
+ /* RFC 2698 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2698 \
+ UINT32_C(0x1)
+ /* RFC 4115 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 \
+ UINT32_C(0x2)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115
/*
- * This value identifies the aggregation RR associated with
- * the ring group. If this value is 0xFF... (All Fs), then no
- * Aggregation ring will be set.
+ * This field is reserved for the future use.
+ * It shall be set to 0.
*/
- uint16_t ar;
+ uint16_t reserved1;
/*
- * This value identifies the statistics context associated
- * with the ring group.
+ * This field is reserved for the future use.
+ * It shall be set to 0.
*/
- uint16_t sc;
-} __attribute__((packed));
+ uint32_t reserved2;
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t commit_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Raw value */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW
+ /* A meter burst size specified in bytes. */
+ uint32_t commit_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid value */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t excess_peak_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Raw unit */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW
+ /* A meter burst size specified in bytes. */
+ uint32_t excess_peak_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
+} __rte_packed;
-/* hwrm_ring_grp_alloc_output (size:128b/16B) */
-struct hwrm_ring_grp_alloc_output {
+/* hwrm_cfa_meter_profile_alloc_output (size:128b/16B) */
+struct hwrm_cfa_meter_profile_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
/*
- * This is the ring group ID value. Use this value to program
- * the default ring group for the VNIC or as table entries
- * in an RSS/COS context.
+ * A value of 0xfff is considered invalid and implies the
+ * profile is not configured.
*/
- uint32_t ring_group_id;
- uint8_t unused_0[3];
+ #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**********************
- * hwrm_ring_grp_free *
- **********************/
+/*******************************
+ * hwrm_cfa_meter_profile_free *
+ *******************************/
-/* hwrm_ring_grp_free_input (size:192b/24B) */
-struct hwrm_ring_grp_free_input {
+/* hwrm_cfa_meter_profile_free_input (size:192b/24B) */
+struct hwrm_cfa_meter_profile_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This is the ring group ID value. */
- uint32_t ring_group_id;
- uint8_t unused_0[4];
-} __attribute__((packed));
+ uint8_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * profile is not configured.
+ */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID
+ uint8_t unused_1[4];
+} __rte_packed;
-/* hwrm_ring_grp_free_output (size:128b/16B) */
-struct hwrm_ring_grp_free_output {
+/* hwrm_cfa_meter_profile_free_output (size:128b/16B) */
+struct hwrm_cfa_meter_profile_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
-/*
- * special reserved flow ID to identify per function default
- * flows for vSwitch offload
- */
-#define DEFAULT_FLOW_ID 0xFFFFFFFFUL
-/*
- * special reserved flow ID to identify per function RoCEv1
- * flows
- */
-#define ROCEV1_FLOW_ID 0xFFFFFFFEUL
-/*
- * special reserved flow ID to identify per function RoCEv2
- * flows
- */
-#define ROCEV2_FLOW_ID 0xFFFFFFFDUL
-/*
- * special reserved flow ID to identify per function RoCEv2
- * CNP flows
- */
-#define ROCEV2_CNP_FLOW_ID 0xFFFFFFFCUL
+} __rte_packed;
-/****************************
- * hwrm_cfa_l2_filter_alloc *
- ****************************/
+/******************************
+ * hwrm_cfa_meter_profile_cfg *
+ ******************************/
-/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */
-struct hwrm_cfa_l2_filter_alloc_input {
+/* hwrm_cfa_meter_profile_cfg_input (size:320b/40B) */
+struct hwrm_cfa_meter_profile_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
+ uint8_t flags;
/*
* Enumeration denoting the RX, TX type of the resource.
* This enumeration is used for resources that are similar for both
* TX and RX paths of the chip.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
- UINT32_C(0x1)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x0)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
/* rx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x1)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
- /* Setting of this flag indicates the applicability to the loopback path. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
- UINT32_C(0x2)
- /*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
- UINT32_C(0x4)
- /*
- * If this flag is set, all t_l2_* fields are invalid
- * and they should not be specified.
- * If this flag is set, then l2_* fields refer to
- * fields of outermost L2 header.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
- UINT32_C(0x8)
- /*
- * Enumeration denoting NO_ROCE_L2 to support old drivers.
- * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_MASK \
- UINT32_C(0x30)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_SFT 4
- /* To support old drivers */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
- (UINT32_C(0x0) << 4)
- /* Only L2 traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_L2 \
- (UINT32_C(0x1) << 4)
- /* Roce & L2 traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE \
- (UINT32_C(0x2) << 4)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE
- /*
- * Setting of this flag indicates that no XDP filter is created with
- * L2 filter.
- * 0 - legacy behavior, XDP filter is created with L2 filter
- * 1 - XDP filter won't be created with L2 filter
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_XDP_DISABLE \
- UINT32_C(0x40)
- /*
- * Setting this flag to 1 indicate the L2 fields in this command
- * pertain to source fields. Setting this flag to 0 indicate the
- * L2 fields in this command pertain to the destination fields
- * and this is the default/legacy behavior.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_SOURCE_VALID \
- UINT32_C(0x80)
- uint32_t enables;
- /*
- * This bit must be '1' for the l2_addr field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
- UINT32_C(0x1)
- /*
- * This bit must be '1' for the l2_addr_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
- UINT32_C(0x2)
- /*
- * This bit must be '1' for the l2_ovlan field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
- UINT32_C(0x4)
- /*
- * This bit must be '1' for the l2_ovlan_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
- UINT32_C(0x8)
- /*
- * This bit must be '1' for the l2_ivlan field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
- UINT32_C(0x10)
- /*
- * This bit must be '1' for the l2_ivlan_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
- UINT32_C(0x20)
- /*
- * This bit must be '1' for the t_l2_addr field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
- UINT32_C(0x40)
- /*
- * This bit must be '1' for the t_l2_addr_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
- UINT32_C(0x80)
- /*
- * This bit must be '1' for the t_l2_ovlan field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
- UINT32_C(0x100)
- /*
- * This bit must be '1' for the t_l2_ovlan_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
- UINT32_C(0x200)
- /*
- * This bit must be '1' for the t_l2_ivlan field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
- UINT32_C(0x400)
- /*
- * This bit must be '1' for the t_l2_ivlan_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
- UINT32_C(0x800)
- /*
- * This bit must be '1' for the src_type field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
- UINT32_C(0x1000)
- /*
- * This bit must be '1' for the src_id field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
- UINT32_C(0x2000)
- /*
- * This bit must be '1' for the tunnel_type field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
- UINT32_C(0x4000)
- /*
- * This bit must be '1' for the dst_id field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x8000)
- /*
- * This bit must be '1' for the mirror_vnic_id field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x10000)
- /*
- * This bit must be '1' for the num_vlans field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_NUM_VLANS \
- UINT32_C(0x20000)
- /*
- * This bit must be '1' for the t_num_vlans field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_NUM_VLANS \
- UINT32_C(0x40000)
- /*
- * This value sets the match value for the L2 MAC address.
- * Destination MAC address for RX path.
- * Source MAC address for TX path.
- */
- uint8_t l2_addr[6];
- /* This value sets the match value for the number of VLANs. */
- uint8_t num_vlans;
- /*
- * This value sets the match value for the number of VLANs
- * in the tunnel headers.
- */
- uint8_t t_num_vlans;
- /*
- * This value sets the mask value for the L2 address.
- * A value of 0 will mask the corresponding bit from
- * compare.
- */
- uint8_t l2_addr_mask[6];
- /* This value sets VLAN ID value for outer VLAN. */
- uint16_t l2_ovlan;
- /*
- * This value sets the mask value for the ovlan id.
- * A value of 0 will mask the corresponding bit from
- * compare.
- */
- uint16_t l2_ovlan_mask;
- /* This value sets VLAN ID value for inner VLAN. */
- uint16_t l2_ivlan;
- /*
- * This value sets the mask value for the ivlan id.
- * A value of 0 will mask the corresponding bit from
- * compare.
- */
- uint16_t l2_ivlan_mask;
- uint8_t unused_1[2];
- /*
- * This value sets the match value for the tunnel
- * L2 MAC address.
- * Destination MAC address for RX path.
- * Source MAC address for TX path.
- */
- uint8_t t_l2_addr[6];
- uint8_t unused_2[2];
- /*
- * This value sets the mask value for the tunnel L2
- * address.
- * A value of 0 will mask the corresponding bit from
- * compare.
- */
- uint8_t t_l2_addr_mask[6];
- /* This value sets VLAN ID value for tunnel outer VLAN. */
- uint16_t t_l2_ovlan;
- /*
- * This value sets the mask value for the tunnel ovlan id.
- * A value of 0 will mask the corresponding bit from
- * compare.
- */
- uint16_t t_l2_ovlan_mask;
- /* This value sets VLAN ID value for tunnel inner VLAN. */
- uint16_t t_l2_ivlan;
- /*
- * This value sets the mask value for the tunnel ivlan id.
- * A value of 0 will mask the corresponding bit from
- * compare.
- */
- uint16_t t_l2_ivlan_mask;
- /* This value identifies the type of source of the packet. */
- uint8_t src_type;
- /* Network port */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
- /* Physical function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
- /* Virtual function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
- /* Virtual NIC of a function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
- /* Embedded processor for CFA management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
- /* Embedded processor for OOB management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
- /* Embedded processor for RoCE */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
- /* Embedded processor for network proxy functions */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG
- uint8_t unused_3;
- /*
- * This value is the id of the source.
- * For a network port, it represents port_id.
- * For a physical function, it represents fid.
- * For a virtual function, it represents vf_id.
- * For a vnic, it represents vnic_id.
- * For embedded processors, this id is not valid.
- *
- * Notes:
- * 1. The function ID is implied if it src_id is
- * not provided for a src_type that is either
- */
- uint32_t src_id;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX
+ /* The meter algorithm type. */
+ uint8_t meter_type;
+ /* RFC 2697 (srTCM) */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2697 \
UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ /* RFC 2698 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2698 \
UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ /* RFC 4115 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 \
UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
- uint8_t unused_4;
- /*
- * If set, this value shall represent the
- * Logical VNIC ID of the destination VNIC for the RX
- * path and network port id of the destination port for
- * the TX path.
- */
- uint16_t dst_id;
- /*
- * Logical VNIC ID of the VNIC where traffic is
- * mirrored.
- */
- uint16_t mirror_vnic_id;
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
/*
- * This hint is provided to help in placing
- * the filter in the filter table.
+ * A value of 0xfff is considered invalid and implies the
+ * profile is not configured.
*/
- uint8_t pri_hint;
- /* No preference */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
- UINT32_C(0x0)
- /* Above the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
- UINT32_C(0x1)
- /* Below the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
- UINT32_C(0x2)
- /* As high as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
- UINT32_C(0x3)
- /* As low as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
- UINT32_C(0x4)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN
- uint8_t unused_5;
- uint32_t unused_6;
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID
/*
- * This is the ID of the filter that goes along with
- * the pri_hint.
- *
- * This field is valid only for the following values.
- * 1 - Above the given filter
- * 2 - Below the given filter
+ * This field is reserved for the future use.
+ * It shall be set to 0.
*/
- uint64_t l2_filter_id_hint;
-} __attribute__((packed));
+ uint32_t reserved;
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t commit_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Raw value */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW
+ /* A meter burst size specified in bytes. */
+ uint32_t commit_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid value */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t excess_peak_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Raw unit */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW
+ /* A meter burst size specified in bytes. */
+ uint32_t excess_peak_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
+} __rte_packed;
-/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */
-struct hwrm_cfa_l2_filter_alloc_output {
+/* hwrm_cfa_meter_profile_cfg_output (size:128b/16B) */
+struct hwrm_cfa_meter_profile_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * This value identifies a set of CFA data structures used for an L2
- * context.
- */
- uint64_t l2_filter_id;
- /*
- * The flow id value in bit 0-29 is the actual ID of the flow
- * associated with this filter and it shall be used to match
- * and associate the flow identifier returned in completion
- * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
- * shall indicate no valid flow id.
- */
- uint32_t flow_id;
- /* Indicate the flow id value. */
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
- UINT32_C(0x3fffffff)
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
- /* Indicate type of the flow. */
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
- UINT32_C(0x40000000)
- /*
- * If this bit set to 0, then it indicates that the flow is
- * internal flow.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
- (UINT32_C(0x0) << 30)
- /*
- * If this bit is set to 1, then it indicates that the flow is
- * external flow.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
- (UINT32_C(0x1) << 30)
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
- /* Indicate the flow direction. */
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
- UINT32_C(0x80000000)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
- (UINT32_C(0x0) << 31)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
- (UINT32_C(0x1) << 31)
- #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
- uint8_t unused_0[3];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***************************
- * hwrm_cfa_l2_filter_free *
- ***************************/
+/*********************************
+ * hwrm_cfa_meter_instance_alloc *
+ *********************************/
-/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_l2_filter_free_input {
+/* hwrm_cfa_meter_instance_alloc_input (size:192b/24B) */
+struct hwrm_cfa_meter_instance_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint8_t flags;
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
*/
- uint64_t l2_filter_id;
-} __attribute__((packed));
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH \
+ UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
+ /*
+ * A value of 0xffff is considered invalid and implies the
+ * profile is not configured.
+ */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID
+ uint8_t unused_1[4];
+} __rte_packed;
-/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_l2_filter_free_output {
+/* hwrm_cfa_meter_instance_alloc_output (size:128b/16B) */
+struct hwrm_cfa_meter_instance_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* This value identifies a meter instance in CFA. */
+ uint16_t meter_instance_id;
+ /*
+ * A value of 0xffff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**************************
- * hwrm_cfa_l2_filter_cfg *
- **************************/
+/*******************************
+ * hwrm_cfa_meter_instance_cfg *
+ *******************************/
-/* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */
-struct hwrm_cfa_l2_filter_cfg_input {
+/* hwrm_cfa_meter_instance_cfg_input (size:192b/24B) */
+struct hwrm_cfa_meter_instance_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
+ uint8_t flags;
/*
* Enumeration denoting the RX, TX type of the resource.
* This enumeration is used for resources that are similar for both
* TX and RX paths of the chip.
*/
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH \
- UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_TX \
UINT32_C(0x0)
/* rx path */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x1)
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
- */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP \
- UINT32_C(0x2)
- /*
- * Enumeration denoting NO_ROCE_L2 to support old drivers.
- * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
- */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_MASK \
- UINT32_C(0xc)
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_SFT 2
- /* To support old drivers */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
- (UINT32_C(0x0) << 2)
- /* Only L2 traffic */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_L2 \
- (UINT32_C(0x1) << 2)
- /* Roce & L2 traffic */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE \
- (UINT32_C(0x2) << 2)
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_LAST \
- HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE
- uint32_t enables;
- /*
- * This bit must be '1' for the dst_id field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX \
UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
/*
- * This bit must be '1' for the new_mirror_vnic_id field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
- UINT32_C(0x2)
- /*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * This value identifies a new meter profile to be associated with
+ * the meter instance specified in this command.
*/
- uint64_t l2_filter_id;
+ uint16_t meter_profile_id;
/*
- * If set, this value shall represent the
- * Logical VNIC ID of the destination VNIC for the RX
- * path and network port id of the destination port for
- * the TX path.
+ * A value of 0xffff is considered invalid and implies the
+ * profile is not configured.
*/
- uint32_t dst_id;
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID
/*
- * New Logical VNIC ID of the VNIC where traffic is
- * mirrored.
+ * This value identifies the ID of a meter instance that needs to be updated with
+ * a new meter profile specified in this command.
*/
- uint32_t new_mirror_vnic_id;
-} __attribute__((packed));
+ uint16_t meter_instance_id;
+ uint8_t unused_1[2];
+} __rte_packed;
-/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */
-struct hwrm_cfa_l2_filter_cfg_output {
+/* hwrm_cfa_meter_instance_cfg_output (size:128b/16B) */
+struct hwrm_cfa_meter_instance_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***************************
- * hwrm_cfa_l2_set_rx_mask *
- ***************************/
+/********************************
+ * hwrm_cfa_meter_instance_free *
+ ********************************/
-/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */
-struct hwrm_cfa_l2_set_rx_mask_input {
+/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */
+struct hwrm_cfa_meter_instance_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* VNIC ID */
- uint32_t vnic_id;
- uint32_t mask;
- /*
- * When this bit is '1', the function is requested to accept
- * multi-cast packets specified by the multicast addr table.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \
- UINT32_C(0x2)
- /*
- * When this bit is '1', the function is requested to accept
- * all multi-cast packets.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \
- UINT32_C(0x4)
- /*
- * When this bit is '1', the function is requested to accept
- * broadcast packets.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \
- UINT32_C(0x8)
- /*
- * When this bit is '1', the function is requested to be
- * put in the promiscuous mode.
- *
- * The HWRM should accept any function to set up
- * promiscuous mode.
- *
- * The HWRM shall follow the semantics below for the
- * promiscuous mode support.
- * # When partitioning is not enabled on a port
- * (i.e. single PF on the port), then the PF shall
- * be allowed to be in the promiscuous mode. When the
- * PF is in the promiscuous mode, then it shall
- * receive all host bound traffic on that port.
- * # When partitioning is enabled on a port
- * (i.e. multiple PFs per port) and a PF on that
- * port is in the promiscuous mode, then the PF
- * receives all traffic within that partition as
- * identified by a unique identifier for the
- * PF (e.g. S-Tag). If a unique outer VLAN
- * for the PF is specified, then the setting of
- * promiscuous mode on that PF shall result in the
- * PF receiving all host bound traffic with matching
- * outer VLAN.
- * # A VF shall can be set in the promiscuous mode.
- * In the promiscuous mode, the VF does not receive any
- * traffic unless a unique outer VLAN for the
- * VF is specified. If a unique outer VLAN
- * for the VF is specified, then the setting of
- * promiscuous mode on that VF shall result in the
- * VF receiving all host bound traffic with the
- * matching outer VLAN.
- * # The HWRM shall allow the setting of promiscuous
- * mode on a function independently from the
- * promiscuous mode settings on other functions.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \
- UINT32_C(0x10)
- /*
- * If this flag is set, the corresponding RX
- * filters shall be set up to cover multicast/broadcast
- * filters for the outermost Layer 2 destination MAC
- * address field.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \
- UINT32_C(0x20)
- /*
- * If this flag is set, the corresponding RX
- * filters shall be set up to cover multicast/broadcast
- * filters for the VLAN-tagged packets that match the
- * TPID and VID fields of VLAN tags in the VLAN tag
- * table specified in this command.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \
- UINT32_C(0x40)
- /*
- * If this flag is set, the corresponding RX
- * filters shall be set up to cover multicast/broadcast
- * filters for non-VLAN tagged packets and VLAN-tagged
- * packets that match the TPID and VID fields of VLAN
- * tags in the VLAN tag table specified in this command.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \
- UINT32_C(0x80)
- /*
- * If this flag is set, the corresponding RX
- * filters shall be set up to cover multicast/broadcast
- * filters for non-VLAN tagged packets and VLAN-tagged
- * packets matching any VLAN tag.
- *
- * If this flag is set, then the HWRM shall ignore
- * VLAN tags specified in vlan_tag_tbl.
- *
- * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan
- * flags is set, then the HWRM shall ignore
- * VLAN tags specified in vlan_tag_tbl.
- *
- * The HWRM client shall set at most one flag out of
- * vlanonly, vlan_nonvlan, and anyvlan_nonvlan.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
- UINT32_C(0x100)
- /* This is the address for mcast address tbl. */
- uint64_t mc_tbl_addr;
- /*
- * This value indicates how many entries in mc_tbl are valid.
- * Each entry is 6 bytes.
- */
- uint32_t num_mc_entries;
- uint8_t unused_0[4];
+ uint8_t flags;
/*
- * This is the address for VLAN tag table.
- * Each VLAN entry in the table is 4 bytes of a VLAN tag
- * including TPID, PCP, DEI, and VID fields in network byte
- * order.
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
*/
- uint64_t vlan_tag_tbl_addr;
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
+ /* This value identifies a meter instance in CFA. */
+ uint16_t meter_instance_id;
/*
- * This value indicates how many entries in vlan_tag_tbl are
- * valid. Each entry is 4 bytes.
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
*/
- uint32_t num_vlan_tags;
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID
uint8_t unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */
-struct hwrm_cfa_l2_set_rx_mask_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- uint8_t unused_0[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */
-struct hwrm_cfa_l2_set_rx_mask_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \
- UINT32_C(0x0)
- /* Unable to complete operation due to conflict with Ntuple Filter */
- #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \
- UINT32_C(0x1)
- #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \
- HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR
+/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */
+struct hwrm_cfa_meter_instance_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
uint8_t unused_0[7];
-} __attribute__((packed));
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
/*******************************
- * hwrm_cfa_vlan_antispoof_cfg *
+ * hwrm_cfa_decap_filter_alloc *
*******************************/
-/* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */
-struct hwrm_cfa_vlan_antispoof_cfg_input {
+/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */
+struct hwrm_cfa_decap_filter_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint32_t flags;
+ /* ovs_tunnel is 1 b */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \
+ UINT32_C(0x1)
+ uint32_t enables;
/*
- * Function ID of the function that is being configured.
- * Only valid for a VF FID configured by the PF.
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
*/
- uint16_t fid;
- uint8_t unused_0[2];
- /* Number of VLAN entries in the vlan_tag_mask_tbl. */
- uint32_t num_vlan_entries;
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x1)
/*
- * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
- * antispoof table. Each table entry contains the 16-bit TPID
- * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask,
- * all in network order to match hwrm_cfa_l2_set_rx_mask.
- * For an individual VLAN entry, the mask value should be 0xfff
- * for the 12-bit VLAN ID.
+ * This bit must be '1' for the tunnel_id field to be
+ * configured.
*/
- uint64_t vlan_tag_mask_tbl_addr;
-} __attribute__((packed));
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the src_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the dst_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the ovlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_OVLAN_VID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the ivlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IVLAN_VID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the t_ovlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_OVLAN_VID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the t_ivlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_IVLAN_VID \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the ethertype field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the src_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the dst_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the ipaddr_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the ip_protocol field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the src_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the dst_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x10000)
+ /*
+ * Tunnel identifier.
+ * Virtual Network Identifier (VNI). Only valid with
+ * tunnel_types VXLAN, NVGRE, and Geneve.
+ * Only lower 24-bits of VNI field are used
+ * in setting up the filter.
+ */
+ uint32_t tunnel_id;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0;
+ uint16_t unused_1;
+ /*
+ * This value indicates the source MAC address in
+ * the Ethernet header.
+ */
+ uint8_t src_macaddr[6];
+ uint8_t unused_2[2];
+ /*
+ * This value indicates the destination MAC address in
+ * the Ethernet header.
+ */
+ uint8_t dst_macaddr[6];
+ /*
+ * This value indicates the VLAN ID of the outer VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ovlan_vid;
+ /*
+ * This value indicates the VLAN ID of the inner VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ivlan_vid;
+ /*
+ * This value indicates the VLAN ID of the outer VLAN tag
+ * in the tunnel Ethernet header.
+ */
+ uint16_t t_ovlan_vid;
+ /*
+ * This value indicates the VLAN ID of the inner VLAN tag
+ * in the tunnel Ethernet header.
+ */
+ uint16_t t_ivlan_vid;
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint16_t ethertype;
+ /*
+ * This value indicates the type of IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t ip_addr_type;
+ /* invalid */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
+ UINT32_C(0x0)
+ /* IPv4 */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
+ UINT32_C(0x4)
+ /* IPv6 */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
+ UINT32_C(0x6)
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ /*
+ * The value of protocol filed in IP header.
+ * Applies to UDP and TCP traffic.
+ * 6 - TCP
+ * 17 - UDP
+ */
+ uint8_t ip_protocol;
+ /* invalid */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
+ UINT32_C(0x0)
+ /* TCP */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
+ UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
+ UINT32_C(0x11)
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
+ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
+ uint16_t unused_3;
+ uint32_t unused_4;
+ /*
+ * The value of source IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t src_ipaddr[4];
+ /*
+ * The value of destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t dst_ipaddr[4];
+ /*
+ * The value of source port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t src_port;
+ /*
+ * The value of destination port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t dst_port;
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path.
+ */
+ uint16_t dst_id;
+ /*
+ * If set, this value shall represent the L2 context that matches the L2
+ * information of the decap filter.
+ */
+ uint16_t l2_ctxt_ref_id;
+} __rte_packed;
-/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */
-struct hwrm_cfa_vlan_antispoof_cfg_output {
+/* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */
+struct hwrm_cfa_decap_filter_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t decap_filter_id;
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/********************************
- * hwrm_cfa_vlan_antispoof_qcfg *
- ********************************/
+/******************************
+ * hwrm_cfa_decap_filter_free *
+ ******************************/
-/* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */
-struct hwrm_cfa_vlan_antispoof_qcfg_input {
+/* hwrm_cfa_decap_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_decap_filter_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Function ID of the function that is being queried.
- * Only valid for a VF FID queried by the PF.
- */
- uint16_t fid;
- uint8_t unused_0[2];
- /*
- * Maximum number of VLAN entries the firmware is allowed to DMA
- * to vlan_tag_mask_tbl.
- */
- uint32_t max_vlan_entries;
- /*
- * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
- * antispoof table to which firmware will DMA to. Each table
- * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only),
- * 16-bit VLAN ID, and a 16-bit mask, all in network order to
- * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry,
- * the mask value should be 0xfff for the 12-bit VLAN ID.
- */
- uint64_t vlan_tag_mask_tbl_addr;
-} __attribute__((packed));
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t decap_filter_id;
+ uint8_t unused_0[4];
+} __rte_packed;
-/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */
-struct hwrm_cfa_vlan_antispoof_qcfg_output {
+/* hwrm_cfa_decap_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_decap_filter_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */
- uint32_t num_vlan_entries;
- uint8_t unused_0[3];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/********************************
- * hwrm_cfa_tunnel_filter_alloc *
- ********************************/
+/***********************
+ * hwrm_cfa_flow_alloc *
+ ***********************/
-/* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */
-struct hwrm_cfa_tunnel_filter_alloc_input {
+/* hwrm_cfa_flow_alloc_input (size:1024b/128B) */
+struct hwrm_cfa_flow_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* Setting of this flag indicates the applicability to the loopback path. */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+ uint16_t flags;
+ /* tunnel is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_TUNNEL \
UINT32_C(0x1)
- uint32_t enables;
+ /* num_vlan is 2 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_MASK \
+ UINT32_C(0x6)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_SFT 1
+ /* no tags */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_NONE \
+ (UINT32_C(0x0) << 1)
+ /* 1 tag */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_ONE \
+ (UINT32_C(0x1) << 1)
+ /* 2 tags */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO \
+ (UINT32_C(0x2) << 1)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_LAST \
+ HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO
+ /* Enumeration denoting the Flow Type. */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_MASK \
+ UINT32_C(0x38)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_SFT 3
+ /* L2 flow */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_L2 \
+ (UINT32_C(0x0) << 3)
+ /* IPV4 flow */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV4 \
+ (UINT32_C(0x1) << 3)
+ /* IPV6 flow */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 \
+ (UINT32_C(0x2) << 3)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \
+ HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6
/*
- * This bit must be '1' for the l2_filter_id field to be
- * configured.
+ * when set to 1, indicates TX flow offload for function specified in src_fid and
+ * the dst_fid should be set to invalid value. To indicate a VM to VM flow, both
+ * of the path_tx and path_rx flags need to be set. For virtio vSwitch offload
+ * case, the src_fid and dst_fid is set to the same fid value. For the SRIOV
+ * vSwitch offload case, the src_fid and dst_fid must be set to the same VF FID
+ * belong to the children VFs of the same PF to indicate VM to VM flow.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
- UINT32_C(0x1)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x40)
/*
- * This bit must be '1' for the l2_addr field to be
- * configured.
+ * when set to 1, indicates RX flow offload for function specified in dst_fid and
+ * the src_fid should be set to invalid value.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
- UINT32_C(0x2)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x80)
/*
- * This bit must be '1' for the l2_ivlan field to be
- * configured.
+ * Set to 1 to indicate matching of VXLAN VNI from the custom vxlan header is
+ * required and the VXLAN VNI value is stored in the first 24 bits of the dmac field.
+ * This flag is only valid when the flow direction is RX.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
- UINT32_C(0x4)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_MATCH_VXLAN_IP_VNI \
+ UINT32_C(0x100)
+ /* Set to 1 to indicate vhost_id is specified in the outer_vlan_tci field. */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_VHOST_ID_USE_VLAN \
+ UINT32_C(0x200)
/*
- * This bit must be '1' for the l3_addr field to be
- * configured.
+ * Tx Flow: vf fid.
+ * Rx Flow: pf fid.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \
- UINT32_C(0x8)
+ uint16_t src_fid;
+ /* Tunnel handle valid when tunnel flag is set. */
+ uint32_t tunnel_handle;
+ uint16_t action_flags;
/*
- * This bit must be '1' for the l3_addr_type field to be
- * configured.
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \
- UINT32_C(0x10)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \
+ UINT32_C(0x1)
+ /* recycle is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \
+ UINT32_C(0x2)
/*
- * This bit must be '1' for the t_l3_addr_type field to be
- * configured.
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \
+ UINT32_C(0x4)
+ /* meter is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_METER \
+ UINT32_C(0x8)
+ /* tunnel is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL \
+ UINT32_C(0x10)
+ /* nat_src is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_SRC \
UINT32_C(0x20)
- /*
- * This bit must be '1' for the t_l3_addr field to be
- * configured.
- */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \
+ /* nat_dest is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_DEST \
UINT32_C(0x40)
- /*
- * This bit must be '1' for the tunnel_type field to be
- * configured.
- */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ /* nat_ipv4_address is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_IPV4_ADDRESS \
UINT32_C(0x80)
+ /* l2_header_rewrite is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_L2_HEADER_REWRITE \
+ UINT32_C(0x100)
+ /* ttl_decrement is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \
+ UINT32_C(0x200)
/*
- * This bit must be '1' for the vni field to be
- * configured.
+ * If set to 1 and flow direction is TX, it indicates decap of L2 header
+ * and encap of tunnel header. If set to 1 and flow direction is RX, it
+ * indicates decap of tunnel header and encap L2 header. The type of tunnel
+ * is specified in the tunnel_type field.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \
- UINT32_C(0x100)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL_IP \
+ UINT32_C(0x400)
+ /* If set to 1, flow aging is enabled for this flow. */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FLOW_AGING_ENABLED \
+ UINT32_C(0x800)
/*
- * This bit must be '1' for the dst_vnic_id field to be
- * configured.
+ * If set to 1 an attempt will be made to try to offload this flow to the
+ * most optimal flow table resource. If set to 0, the flow will be
+ * placed to the default flow table resource.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \
- UINT32_C(0x200)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \
+ UINT32_C(0x1000)
/*
- * This bit must be '1' for the mirror_vnic_id field to be
- * configured.
+ * If set to 1 there will be no attempt to allocate an on-chip try to
+ * offload this flow. If set to 0, which will keep compatibility with the
+ * older drivers, will cause the FW to attempt to allocate an on-chip flow
+ * counter for the newly created flow. This will keep the existing behavior
+ * with EM flows which always had an associated flow counter.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x400)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NO_FLOW_COUNTER_ALLOC \
+ UINT32_C(0x2000)
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * Tx Flow: pf or vf fid.
+ * Rx Flow: vf fid.
*/
- uint64_t l2_filter_id;
+ uint16_t dst_fid;
+ /* VLAN tpid, valid when push_vlan flag is set. */
+ uint16_t l2_rewrite_vlan_tpid;
+ /* VLAN tci, valid when push_vlan flag is set. */
+ uint16_t l2_rewrite_vlan_tci;
+ /* Meter id, valid when meter flag is set. */
+ uint16_t act_meter_id;
+ /* Flow with the same l2 context tcam key. */
+ uint16_t ref_flow_handle;
+ /* This value sets the match value for the ethertype. */
+ uint16_t ethertype;
+ /* valid when num tags is 1 or 2. */
+ uint16_t outer_vlan_tci;
+ /* This value sets the match value for the Destination MAC address. */
+ uint16_t dmac[3];
+ /* valid when num tags is 2. */
+ uint16_t inner_vlan_tci;
+ /* This value sets the match value for the Source MAC address. */
+ uint16_t smac[3];
+ /* The bit length of destination IP address mask. */
+ uint8_t ip_dst_mask_len;
+ /* The bit length of source IP address mask. */
+ uint8_t ip_src_mask_len;
+ /* The value of destination IPv4/IPv6 address. */
+ uint32_t ip_dst[4];
+ /* The source IPv4/IPv6 address. */
+ uint32_t ip_src[4];
/*
- * This value sets the match value for the inner L2
- * MAC address.
- * Destination MAC address for RX path.
- * Source MAC address for TX path.
+ * The value of source port.
+ * Applies to UDP and TCP traffic.
*/
- uint8_t l2_addr[6];
+ uint16_t l4_src_port;
/*
- * This value sets VLAN ID value for inner VLAN.
- * Only 12-bits of VLAN ID are used in setting the filter.
+ * The value of source port mask.
+ * Applies to UDP and TCP traffic.
*/
- uint16_t l2_ivlan;
+ uint16_t l4_src_port_mask;
/*
- * The value of inner destination IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * The value of destination port.
+ * Applies to UDP and TCP traffic.
*/
- uint32_t l3_addr[4];
+ uint16_t l4_dst_port;
/*
- * The value of tunnel destination IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * The value of destination port mask.
+ * Applies to UDP and TCP traffic.
*/
- uint32_t t_l3_addr[4];
+ uint16_t l4_dst_port_mask;
/*
- * This value indicates the type of inner IP address.
- * 4 - IPv4
- * 6 - IPv6
- * All others are invalid.
+ * NAT IPv4/6 address based on address type flag.
+ * 0 values are ignored.
*/
- uint8_t l3_addr_type;
+ uint32_t nat_ip_address[4];
+ /* L2 header re-write Destination MAC address. */
+ uint16_t l2_rewrite_dmac[3];
/*
- * This value indicates the type of tunnel IP address.
- * 4 - IPv4
- * 6 - IPv6
- * All others are invalid.
+ * The NAT source/destination port based on direction flag.
+ * Applies to UDP and TCP traffic.
+ * 0 values are ignored.
*/
- uint8_t t_l3_addr_type;
+ uint16_t nat_port;
+ /* L2 header re-write Source MAC address. */
+ uint16_t l2_rewrite_smac[3];
+ /* The value of ip protocol. */
+ uint8_t ip_proto;
/* Tunnel Type. */
uint8_t tunnel_type;
/* Non-tunnel */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
UINT32_C(0x0)
/* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
UINT32_C(0x3)
/* IP in IP */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
UINT32_C(0x4)
/* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
UINT32_C(0x7)
/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
UINT32_C(0x8)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
/* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
- /*
- * tunnel_flags allows the user to indicate the tunnel tag detection
- * for the tunnel type specified in tunnel_type.
- */
- uint8_t tunnel_flags;
- /*
- * If the tunnel_type is geneve, then this bit indicates if we
- * need to match the geneve OAM packet.
- * If the tunnel_type is nvgre or gre, then this bit indicates if
- * we need to detect checksum present bit in geneve header.
- * If the tunnel_type is mpls, then this bit indicates if we need
- * to match mpls packet with explicit IPV4/IPV6 null header.
- */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \
- UINT32_C(0x1)
- /*
- * If the tunnel_type is geneve, then this bit indicates if we
- * need to detect the critical option bit set in the oam packet.
- * If the tunnel_type is nvgre or gre, then this bit indicates
- * if we need to match nvgre packets with key present bit set in
- * gre header.
- * If the tunnel_type is mpls, then this bit indicates if we
- * need to match mpls packet with S bit from inner/second label.
- */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \
- UINT32_C(0x2)
- /*
- * If the tunnel_type is geneve, then this bit indicates if we
- * need to match geneve packet with extended header bit set in
- * geneve header.
- * If the tunnel_type is nvgre or gre, then this bit indicates
- * if we need to match nvgre packets with sequence number
- * present bit set in gre header.
- * If the tunnel_type is mpls, then this bit indicates if we
- * need to match mpls packet with S bit from out/first label.
- */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \
- UINT32_C(0x4)
- /*
- * Virtual Network Identifier (VNI). Only valid with
- * tunnel_types VXLAN, NVGRE, and Geneve.
- * Only lower 24-bits of VNI field are used
- * in setting up the filter.
- */
- uint32_t vni;
- /* Logical VNIC ID of the destination VNIC. */
- uint32_t dst_vnic_id;
- /*
- * Logical VNIC ID of the VNIC where traffic is
- * mirrored.
- */
- uint32_t mirror_vnic_id;
-} __attribute__((packed));
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+} __rte_packed;
-/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */
-struct hwrm_cfa_tunnel_filter_alloc_output {
+/* hwrm_cfa_flow_alloc_output (size:256b/32B) */
+struct hwrm_cfa_flow_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value is an opaque id into CFA data structures. */
- uint64_t tunnel_filter_id;
+ /* Flow record index. */
+ uint16_t flow_handle;
+ uint8_t unused_0[2];
/*
* The flow id value in bit 0-29 is the actual ID of the flow
* associated with this filter and it shall be used to match
*/
uint32_t flow_id;
/* Indicate the flow id value. */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
UINT32_C(0x3fffffff)
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
/* Indicate type of the flow. */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \
UINT32_C(0x40000000)
/*
* If this bit set to 0, then it indicates that the flow is
* internal flow.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
(UINT32_C(0x0) << 30)
/*
* If this bit is set to 1, then it indicates that the flow is
* external flow.
*/
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
(UINT32_C(0x1) << 30)
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
- HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
/* Indicate the flow direction. */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \
UINT32_C(0x80000000)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
(UINT32_C(0x0) << 31)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
(UINT32_C(0x1) << 31)
- #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
- HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
- uint8_t unused_0[3];
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX
+ /* This value identifies a set of CFA data structures used for a flow. */
+ uint64_t ext_flow_handle;
+ uint32_t flow_counter_id;
+ uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************************
- * hwrm_cfa_tunnel_filter_free *
- *******************************/
+/* hwrm_cfa_flow_alloc_cmd_err (size:64b/8B) */
+struct hwrm_cfa_flow_alloc_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* No more L2 Context TCAM */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_L2_CONTEXT_TCAM UINT32_C(0x1)
+ /* No more action records */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_ACTION_RECORD UINT32_C(0x2)
+ /* No more flow counters */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_COUNTER UINT32_C(0x3)
+ /* No more wild-card TCAM */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_WILD_CARD_TCAM UINT32_C(0x4)
+ /* Hash collsion in exact match tables */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_HASH_COLLISION UINT32_C(0x5)
+ /* Key is already installed */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_KEY_EXISTS UINT32_C(0x6)
+ /* Flow Context DB is out of resource */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB UINT32_C(0x7)
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_LAST \
+ HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/**********************
+ * hwrm_cfa_flow_free *
+ **********************/
-/* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_tunnel_filter_free_input {
+/* hwrm_cfa_flow_free_input (size:256b/32B) */
+struct hwrm_cfa_flow_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This value is an opaque id into CFA data structures. */
- uint64_t tunnel_filter_id;
-} __attribute__((packed));
+ /* Flow record index. */
+ uint16_t flow_handle;
+ uint16_t unused_0;
+ /* Flow counter id to be freed. */
+ uint32_t flow_counter_id;
+ /* This value identifies a set of CFA data structures used for a flow. */
+ uint64_t ext_flow_handle;
+} __rte_packed;
-/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_tunnel_filter_free_output {
+/* hwrm_cfa_flow_free_output (size:256b/32B) */
+struct hwrm_cfa_flow_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* packet is 64 b */
+ uint64_t packet;
+ /* byte is 64 b */
+ uint64_t byte;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
-
-/***************************************
- * hwrm_cfa_redirect_tunnel_type_alloc *
- ***************************************/
-
+} __rte_packed;
-/* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */
-struct hwrm_cfa_redirect_tunnel_type_alloc_input {
- /* The HWRM command request type. */
- uint16_t req_type;
- /*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
- */
- uint16_t cmpl_ring;
- /*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
- */
- uint16_t seq_id;
- /*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
- * * 0xFFFD - Reserved for user-space HWRM interface
- * * 0xFFFF - HWRM
- */
- uint16_t target_id;
+/* hwrm_cfa_flow_action_data (size:960b/120B) */
+struct hwrm_cfa_flow_action_data {
+ uint16_t action_flags;
+ /* Setting of this flag indicates accept action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FWD \
+ UINT32_C(0x1)
+ /* Setting of this flag indicates recycle action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_RECYCLE \
+ UINT32_C(0x2)
+ /* Setting of this flag indicates drop action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DROP \
+ UINT32_C(0x4)
+ /* Setting of this flag indicates meter action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_METER \
+ UINT32_C(0x8)
+ /* Setting of this flag indicates tunnel action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL \
+ UINT32_C(0x10)
/*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
+ * If set to 1 and flow direction is TX, it indicates decap of L2 header
+ * and encap of tunnel header. If set to 1 and flow direction is RX, it
+ * indicates decap of tunnel header and encap L2 header.
*/
- uint64_t resp_addr;
- /* The destination function id, to whom the traffic is redirected. */
- uint16_t dest_fid;
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL_IP \
+ UINT32_C(0x20)
+ /* Setting of this flag indicates ttl decrement action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TTL_DECREMENT \
+ UINT32_C(0x40)
+ /* If set to 1, flow aging is enabled for this flow. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FLOW_AGING_ENABLED \
+ UINT32_C(0x80)
+ /* Setting of this flag indicates encap action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_ENCAP \
+ UINT32_C(0x100)
+ /* Setting of this flag indicates decap action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DECAP \
+ UINT32_C(0x200)
+ /* Meter id. */
+ uint16_t act_meter_id;
+ /* VNIC id. */
+ uint16_t vnic_id;
+ /* vport number. */
+ uint16_t vport_id;
+ /* The NAT source/destination. */
+ uint16_t nat_port;
+ uint16_t unused_0[3];
+ /* NAT IPv4/IPv6 address. */
+ uint32_t nat_ip_address[4];
+ /* Encapsulation Type. */
+ uint8_t encap_type;
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_NVGRE UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_MPLS UINT32_C(0x6)
+ /* VLAN */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VLAN UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_V4 UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE_V1 UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2_ETYPE UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 UINT32_C(0xc)
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_LAST \
+ HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6
+ uint8_t unused[7];
+ /* This value is encap data for the associated encap type. */
+ uint32_t encap_data[20];
+} __rte_packed;
+
+/* hwrm_cfa_flow_tunnel_hdr_data (size:64b/8B) */
+struct hwrm_cfa_flow_tunnel_hdr_data {
/* Tunnel Type. */
uint8_t tunnel_type;
/* Non-tunnel */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NONTUNNEL \
UINT32_C(0x0)
/* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2GRE \
UINT32_C(0x3)
/* IP in IP */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPIP \
UINT32_C(0x4)
/* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_STT \
UINT32_C(0x7)
/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE \
UINT32_C(0x8)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
/* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
- /* Tunnel alloc flags. */
- uint8_t flags;
- /* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \
- UINT32_C(0x1)
- uint8_t unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */
-struct hwrm_cfa_redirect_tunnel_type_alloc_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- uint8_t unused_0[7];
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_LAST \
+ HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused[3];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * Tunnel identifier.
+ * Virtual Network Identifier (VNI).
*/
- uint8_t valid;
-} __attribute__((packed));
+ uint32_t tunnel_id;
+} __rte_packed;
+
+/* hwrm_cfa_flow_l4_key_data (size:64b/8B) */
+struct hwrm_cfa_flow_l4_key_data {
+ /* The value of source port. */
+ uint16_t l4_src_port;
+ /* The value of destination port. */
+ uint16_t l4_dst_port;
+ uint32_t unused;
+} __rte_packed;
+
+/* hwrm_cfa_flow_l3_key_data (size:512b/64B) */
+struct hwrm_cfa_flow_l3_key_data {
+ /* The value of ip protocol. */
+ uint8_t ip_protocol;
+ uint8_t unused_0[7];
+ /* The value of destination IPv4/IPv6 address. */
+ uint32_t ip_dst[4];
+ /* The source IPv4/IPv6 address. */
+ uint32_t ip_src[4];
+ /* NAT IPv4/IPv6 address. */
+ uint32_t nat_ip_address[4];
+ uint32_t unused[2];
+} __rte_packed;
+
+/* hwrm_cfa_flow_l2_key_data (size:448b/56B) */
+struct hwrm_cfa_flow_l2_key_data {
+ /* Destination MAC address. */
+ uint16_t dmac[3];
+ uint16_t unused_0;
+ /* Source MAC address. */
+ uint16_t smac[3];
+ uint16_t unused_1;
+ /* L2 header re-write Destination MAC address. */
+ uint16_t l2_rewrite_dmac[3];
+ uint16_t unused_2;
+ /* L2 header re-write Source MAC address. */
+ uint16_t l2_rewrite_smac[3];
+ /* Ethertype. */
+ uint16_t ethertype;
+ /* Number of VLAN tags. */
+ uint16_t num_vlan_tags;
+ /* VLAN tpid. */
+ uint16_t l2_rewrite_vlan_tpid;
+ /* VLAN tci. */
+ uint16_t l2_rewrite_vlan_tci;
+ uint8_t unused_3[2];
+ /* Outer VLAN TPID. */
+ uint16_t ovlan_tpid;
+ /* Outer VLAN TCI. */
+ uint16_t ovlan_tci;
+ /* Inner VLAN TPID. */
+ uint16_t ivlan_tpid;
+ /* Inner VLAN TCI. */
+ uint16_t ivlan_tci;
+ uint8_t unused[8];
+} __rte_packed;
+
+/* hwrm_cfa_flow_key_data (size:4160b/520B) */
+struct hwrm_cfa_flow_key_data {
+ /* Flow associated tunnel L2 header key info. */
+ uint32_t t_l2_key_data[14];
+ /* Flow associated tunnel L2 header mask info. */
+ uint32_t t_l2_key_mask[14];
+ /* Flow associated tunnel L3 header key info. */
+ uint32_t t_l3_key_data[16];
+ /* Flow associated tunnel L3 header mask info. */
+ uint32_t t_l3_key_mask[16];
+ /* Flow associated tunnel L4 header key info. */
+ uint32_t t_l4_key_data[2];
+ /* Flow associated tunnel L4 header mask info. */
+ uint32_t t_l4_key_mask[2];
+ /* Flow associated tunnel header info. */
+ uint32_t tunnel_hdr[2];
+ /* Flow associated L2 header key info. */
+ uint32_t l2_key_data[14];
+ /* Flow associated L2 header mask info. */
+ uint32_t l2_key_mask[14];
+ /* Flow associated L3 header key info. */
+ uint32_t l3_key_data[16];
+ /* Flow associated L3 header mask info. */
+ uint32_t l3_key_mask[16];
+ /* Flow associated L4 header key info. */
+ uint32_t l4_key_data[2];
+ /* Flow associated L4 header mask info. */
+ uint32_t l4_key_mask[2];
+} __rte_packed;
-/**************************************
- * hwrm_cfa_redirect_tunnel_type_free *
- **************************************/
+/**********************
+ * hwrm_cfa_flow_info *
+ **********************/
-/* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */
-struct hwrm_cfa_redirect_tunnel_type_free_input {
+/* hwrm_cfa_flow_info_input (size:256b/32B) */
+struct hwrm_cfa_flow_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The destination function id, to whom the traffic is redirected. */
- uint16_t dest_fid;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \
- UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL
- uint8_t unused_0[5];
-} __attribute__((packed));
+ /* Flow record index. */
+ uint16_t flow_handle;
+ /* Max flow handle */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_MASK \
+ UINT32_C(0xfff)
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_SFT 0
+ /* CNP flow handle */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_CNP_CNT \
+ UINT32_C(0x1000)
+ /* RoCEv1 flow handle */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_ROCEV1_CNT \
+ UINT32_C(0x2000)
+ /* RoCEv2 flow handle */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_ROCEV2_CNT \
+ UINT32_C(0x4000)
+ /* Direction rx = 1 */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_DIR_RX \
+ UINT32_C(0x8000)
+ uint8_t unused_0[6];
+ /* This value identifies a set of CFA data structures used for a flow. */
+ uint64_t ext_flow_handle;
+} __rte_packed;
-/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */
-struct hwrm_cfa_redirect_tunnel_type_free_output {
+/* hwrm_cfa_flow_info_output (size:5632b/704B) */
+struct hwrm_cfa_flow_info_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ uint8_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ /* profile is 8 b */
+ uint8_t profile;
+ /* src_fid is 16 b */
+ uint16_t src_fid;
+ /* dst_fid is 16 b */
+ uint16_t dst_fid;
+ /* l2_ctxt_id is 16 b */
+ uint16_t l2_ctxt_id;
+ /* em_info is 64 b */
+ uint64_t em_info;
+ /* tcam_info is 64 b */
+ uint64_t tcam_info;
+ /* vfp_tcam_info is 64 b */
+ uint64_t vfp_tcam_info;
+ /* ar_id is 16 b */
+ uint16_t ar_id;
+ /* flow_handle is 16 b */
+ uint16_t flow_handle;
+ /* tunnel_handle is 32 b */
+ uint32_t tunnel_handle;
+ /* The flow aging timer for the flow, the unit is 100 milliseconds */
+ uint16_t flow_timer;
+ uint8_t unused_0[6];
+ /* Flow associated L2, L3 and L4 headers info. */
+ uint32_t flow_key_data[130];
+ /* Flow associated action record info. */
+ uint32_t flow_action_info[30];
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**************************************
- * hwrm_cfa_redirect_tunnel_type_info *
- **************************************/
+/***********************
+ * hwrm_cfa_flow_flush *
+ ***********************/
-/* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */
-struct hwrm_cfa_redirect_tunnel_type_info_input {
+/* hwrm_cfa_flow_flush_input (size:256b/32B) */
+struct hwrm_cfa_flow_flush_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The source function id. */
- uint16_t src_fid;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \
- UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \
+ /* flags is 32 b */
+ uint32_t flags;
+ /*
+ * Set to 1 to indicate the page size, page layers, and flow_handle_table_dma_addr
+ * fields are valid. The flow flush operation should only flush the flows from the
+ * flow table specified. This flag is set to 0 by older driver. For older firmware,
+ * setting this flag has no effect.
+ */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_TABLE_VALID \
UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \
+ /*
+ * Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA
+ * context memory tables etc. This flag is set to 0 by older driver. For older firmware,
+ * setting this flag has no effect.
+ */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \
UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \
+ /*
+ * Set to 1 to indicate flow flush operation to cleanup all the flows by the caller.
+ * This flag is set to 0 by older driver. For older firmware, setting this flag has no effect.
+ */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_PORT \
UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL
- uint8_t unused_0[5];
-} __attribute__((packed));
+ /* Set to 1 to indicate the flow counter IDs are included in the flow table. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_INCL_FC \
+ UINT32_C(0x8000000)
+ /*
+ * This specifies the size of flow handle entries provided by the driver
+ * in the flow table specified below. Only two flow handle size enums are defined.
+ */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_MASK \
+ UINT32_C(0xc0000000)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_SFT \
+ 30
+ /* The flow handle is 16bit */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_16BIT \
+ (UINT32_C(0x0) << 30)
+ /* The flow handle is 64bit */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_LAST \
+ HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT
+ /* Specify page size of the flow table memory. */
+ uint8_t page_size;
+ /* The page size is 4K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* The page size is 8K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* The page size is 64K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* The page size is 256K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* The page size is 1M */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* The page size is 2M */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* The page size is 4M */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* The page size is 1G */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G
+ /* FLow table memory indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2
+ /* number of flows in the flow table */
+ uint16_t num_flows;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+} __rte_packed;
-/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */
-struct hwrm_cfa_redirect_tunnel_type_info_output {
+/* hwrm_cfa_flow_flush_output (size:128b/16B) */
+struct hwrm_cfa_flow_flush_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The destination function id, to whom the traffic is redirected. */
- uint16_t dest_fid;
- uint8_t unused_0[5];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
-
-/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */
-struct hwrm_vxlan_ipv4_hdr {
- /* IPv4 version and header length. */
- uint8_t ver_hlen;
- /* IPv4 header length */
- #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf)
- #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0
- /* Version */
- #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK UINT32_C(0xf0)
- #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT 4
- /* IPv4 type of service. */
- uint8_t tos;
- /* IPv4 identification. */
- uint16_t ip_id;
- /* IPv4 flags and offset. */
- uint16_t flags_frag_offset;
- /* IPv4 TTL. */
- uint8_t ttl;
- /* IPv4 protocol. */
- uint8_t protocol;
- /* IPv4 source address. */
- uint32_t src_ip_addr;
- /* IPv4 destination address. */
- uint32_t dest_ip_addr;
-} __attribute__((packed));
-
-/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */
-struct hwrm_vxlan_ipv6_hdr {
- /* IPv6 version, traffic class and flow label. */
- uint32_t ver_tc_flow_label;
- /* IPv6 version shift */
- #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \
- UINT32_C(0x1c)
- /* IPv6 version mask */
- #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \
- UINT32_C(0xf0000000)
- /* IPv6 TC shift */
- #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \
- UINT32_C(0x14)
- /* IPv6 TC mask */
- #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \
- UINT32_C(0xff00000)
- /* IPv6 flow label shift */
- #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \
- UINT32_C(0x0)
- /* IPv6 flow label mask */
- #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \
- UINT32_C(0xfffff)
- #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \
- HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK
- /* IPv6 payload length. */
- uint16_t payload_len;
- /* IPv6 next header. */
- uint8_t next_hdr;
- /* IPv6 TTL. */
- uint8_t ttl;
- /* IPv6 source address. */
- uint32_t src_ip_addr[4];
- /* IPv6 destination address. */
- uint32_t dest_ip_addr[4];
-} __attribute__((packed));
-
-/* hwrm_cfa_encap_data_vxlan (size:640b/80B) */
-struct hwrm_cfa_encap_data_vxlan {
- /* Source MAC address. */
- uint8_t src_mac_addr[6];
- /* reserved. */
- uint16_t unused_0;
- /* Destination MAC address. */
- uint8_t dst_mac_addr[6];
- /* Number of VLAN tags. */
- uint8_t num_vlan_tags;
- /* reserved. */
- uint8_t unused_1;
- /* Outer VLAN TPID. */
- uint16_t ovlan_tpid;
- /* Outer VLAN TCI. */
- uint16_t ovlan_tci;
- /* Inner VLAN TPID. */
- uint16_t ivlan_tpid;
- /* Inner VLAN TCI. */
- uint16_t ivlan_tci;
- /* L3 header fields. */
- uint32_t l3[10];
- /* IP version mask. */
- #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf)
- /* IP version 4. */
- #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4)
- /* IP version 6. */
- #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6)
- #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \
- HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6
- /* UDP source port. */
- uint16_t src_port;
- /* UDP destination port. */
- uint16_t dst_port;
- /* VXLAN Network Identifier. */
- uint32_t vni;
- /* 3 bytes VXLAN header reserve fields from 1st dword of the VXLAN header. */
- uint8_t hdr_rsvd0[3];
- /* 1 byte VXLAN header reserve field from 2nd dword of the VXLAN header. */
- uint8_t hdr_rsvd1;
- /* VXLAN header flags field. */
- uint8_t hdr_flags;
- uint8_t unused[3];
-} __attribute__((packed));
+} __rte_packed;
-/*******************************
- * hwrm_cfa_encap_record_alloc *
- *******************************/
+/***********************
+ * hwrm_cfa_flow_stats *
+ ***********************/
-/* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */
-struct hwrm_cfa_encap_record_alloc_input {
+/* hwrm_cfa_flow_stats_input (size:640b/80B) */
+struct hwrm_cfa_flow_stats_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* Setting of this flag indicates the applicability to the loopback path. */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \
- UINT32_C(0x1)
- /*
- * Setting of this flag indicates this encap record is external encap record.
- * Resetting of this flag indicates this flag is internal encap record and
- * this is the default setting.
- */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_EXTERNAL \
- UINT32_C(0x2)
- /* Encapsulation Type. */
- uint8_t encap_type;
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \
- UINT32_C(0x6)
- /* VLAN */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \
- HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6
- uint8_t unused_0[3];
- /* This value is encap data used for the given encap type. */
- uint32_t encap_data[20];
-} __attribute__((packed));
+ /* Flow handle. */
+ uint16_t num_flows;
+ /* Flow handle. */
+ uint16_t flow_handle_0;
+ /* Flow handle. */
+ uint16_t flow_handle_1;
+ /* Flow handle. */
+ uint16_t flow_handle_2;
+ /* Flow handle. */
+ uint16_t flow_handle_3;
+ /* Flow handle. */
+ uint16_t flow_handle_4;
+ /* Flow handle. */
+ uint16_t flow_handle_5;
+ /* Flow handle. */
+ uint16_t flow_handle_6;
+ /* Flow handle. */
+ uint16_t flow_handle_7;
+ /* Flow handle. */
+ uint16_t flow_handle_8;
+ /* Flow handle. */
+ uint16_t flow_handle_9;
+ uint8_t unused_0[2];
+ /* Flow ID of a flow. */
+ uint32_t flow_id_0;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_1;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_2;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_3;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_4;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_5;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_6;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_7;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_8;
+ /* Flow ID of a flow. */
+ uint32_t flow_id_9;
+} __rte_packed;
-/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */
-struct hwrm_cfa_encap_record_alloc_output {
+/* hwrm_cfa_flow_stats_output (size:1408b/176B) */
+struct hwrm_cfa_flow_stats_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value is an opaque id into CFA data structures. */
- uint32_t encap_record_id;
- uint8_t unused_0[3];
+ /* packet_0 is 64 b */
+ uint64_t packet_0;
+ /* packet_1 is 64 b */
+ uint64_t packet_1;
+ /* packet_2 is 64 b */
+ uint64_t packet_2;
+ /* packet_3 is 64 b */
+ uint64_t packet_3;
+ /* packet_4 is 64 b */
+ uint64_t packet_4;
+ /* packet_5 is 64 b */
+ uint64_t packet_5;
+ /* packet_6 is 64 b */
+ uint64_t packet_6;
+ /* packet_7 is 64 b */
+ uint64_t packet_7;
+ /* packet_8 is 64 b */
+ uint64_t packet_8;
+ /* packet_9 is 64 b */
+ uint64_t packet_9;
+ /* byte_0 is 64 b */
+ uint64_t byte_0;
+ /* byte_1 is 64 b */
+ uint64_t byte_1;
+ /* byte_2 is 64 b */
+ uint64_t byte_2;
+ /* byte_3 is 64 b */
+ uint64_t byte_3;
+ /* byte_4 is 64 b */
+ uint64_t byte_4;
+ /* byte_5 is 64 b */
+ uint64_t byte_5;
+ /* byte_6 is 64 b */
+ uint64_t byte_6;
+ /* byte_7 is 64 b */
+ uint64_t byte_7;
+ /* byte_8 is 64 b */
+ uint64_t byte_8;
+ /* byte_9 is 64 b */
+ uint64_t byte_9;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************************
- * hwrm_cfa_encap_record_free *
- ******************************/
+/***********************************
+ * hwrm_cfa_flow_aging_timer_reset *
+ ***********************************/
-/* hwrm_cfa_encap_record_free_input (size:192b/24B) */
-struct hwrm_cfa_encap_record_free_input {
+/* hwrm_cfa_flow_aging_timer_reset_input (size:256b/32B) */
+struct hwrm_cfa_flow_aging_timer_reset_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This value is an opaque id into CFA data structures. */
- uint32_t encap_record_id;
- uint8_t unused_0[4];
-} __attribute__((packed));
+ /* Flow record index. */
+ uint16_t flow_handle;
+ uint8_t unused_0[2];
+ /*
+ * New flow timer value for the flow specified in the ext_flow_handle.
+ * The flow timer unit is 100ms.
+ */
+ uint32_t flow_timer;
+ /* This value identifies a set of CFA data structures used for a flow. */
+ uint64_t ext_flow_handle;
+} __rte_packed;
-/* hwrm_cfa_encap_record_free_output (size:128b/16B) */
-struct hwrm_cfa_encap_record_free_output {
+/* hwrm_cfa_flow_aging_timer_reset_output (size:128b/16B) */
+struct hwrm_cfa_flow_aging_timer_reset_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/********************************
- * hwrm_cfa_ntuple_filter_alloc *
- ********************************/
+/***************************
+ * hwrm_cfa_flow_aging_cfg *
+ ***************************/
-/* hwrm_cfa_ntuple_filter_alloc_input (size:1088b/136B) */
-struct hwrm_cfa_ntuple_filter_alloc_input {
+/* hwrm_cfa_flow_aging_cfg_input (size:384b/48B) */
+struct hwrm_cfa_flow_aging_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* Setting of this flag indicates the applicability to the loopback path. */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
- UINT32_C(0x1)
- /*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \
- UINT32_C(0x2)
- /*
- * Setting of this flag indicates that a meter is expected to be attached
- * to this flow. This hint can be used when choosing the action record
- * format required for the flow.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
- UINT32_C(0x4)
- /*
- * Setting of this flag indicates that the dest_id field contains function ID.
- * If this is not set it indicates dest_id is VNIC or VPORT.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \
- UINT32_C(0x8)
- uint32_t enables;
- /*
- * This bit must be '1' for the l2_filter_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+ /* The bit field to enable per flow aging configuration. */
+ uint16_t enables;
+ /* This bit must be '1' for the tcp flow timer field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FLOW_TIMER \
UINT32_C(0x1)
- /*
- * This bit must be '1' for the ethertype field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
+ /* This bit must be '1' for the tcp finish timer field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FIN_TIMER \
UINT32_C(0x2)
- /*
- * This bit must be '1' for the tunnel_type field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ /* This bit must be '1' for the udp flow timer field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_UDP_FLOW_TIMER \
UINT32_C(0x4)
- /*
- * This bit must be '1' for the src_macaddr field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+ /* This bit must be '1' for the eem dma interval field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_DMA_INTERVAL \
UINT32_C(0x8)
- /*
- * This bit must be '1' for the ipaddr_type field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ /* This bit must be '1' for the eem notice interval field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_NOTICE_INTERVAL \
UINT32_C(0x10)
- /*
- * This bit must be '1' for the src_ipaddr field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ /* This bit must be '1' for the eem context memory maximum entries field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MAX_ENTRIES \
UINT32_C(0x20)
- /*
- * This bit must be '1' for the src_ipaddr_mask field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \
+ /* This bit must be '1' for the eem context memory ID field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_ID \
UINT32_C(0x40)
- /*
- * This bit must be '1' for the dst_ipaddr field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ /* This bit must be '1' for the eem context memory type field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MEM_TYPE \
UINT32_C(0x80)
- /*
- * This bit must be '1' for the dst_ipaddr_mask field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \
- UINT32_C(0x100)
- /*
- * This bit must be '1' for the ip_protocol field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
- UINT32_C(0x200)
- /*
- * This bit must be '1' for the src_port field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
- UINT32_C(0x400)
- /*
- * This bit must be '1' for the src_port_mask field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \
- UINT32_C(0x800)
- /*
- * This bit must be '1' for the dst_port field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
- UINT32_C(0x1000)
- /*
- * This bit must be '1' for the dst_port_mask field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \
- UINT32_C(0x2000)
- /*
- * This bit must be '1' for the pri_hint field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \
- UINT32_C(0x4000)
- /*
- * This bit must be '1' for the ntuple_filter_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \
- UINT32_C(0x8000)
- /*
- * This bit must be '1' for the dst_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x10000)
- /*
- * This bit must be '1' for the mirror_vnic_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x20000)
- /*
- * This bit must be '1' for the dst_macaddr field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
- UINT32_C(0x40000)
- /*
- * This bit must be '1' for the rfs_ring_tbl_idx field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_RFS_RING_TBL_IDX \
- UINT32_C(0x80000)
- /*
- * This value identifies a set of CFA data structures used for an L2
- * context.
- */
- uint64_t l2_filter_id;
- /*
- * This value indicates the source MAC address in
- * the Ethernet header.
- */
- uint8_t src_macaddr[6];
- /* This value indicates the ethertype in the Ethernet header. */
- uint16_t ethertype;
- /*
- * This value indicates the type of IP address.
- * 4 - IPv4
- * 6 - IPv6
- * All others are invalid.
- */
- uint8_t ip_addr_type;
- /* invalid */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
- UINT32_C(0x0)
- /* IPv4 */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
- UINT32_C(0x4)
- /* IPv6 */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
- UINT32_C(0x6)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
- /*
- * The value of protocol filed in IP header.
- * Applies to UDP and TCP traffic.
- * 6 - TCP
- * 17 - UDP
- */
- uint8_t ip_protocol;
- /* invalid */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
- UINT32_C(0x0)
- /* TCP */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
- UINT32_C(0x6)
- /* UDP */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
- UINT32_C(0x11)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
- /*
- * If set, this value shall represent the
- * Logical VNIC ID of the destination VNIC for the RX
- * path and network port id of the destination port for
- * the TX path.
- */
- uint16_t dst_id;
- /*
- * Logical VNIC ID of the VNIC where traffic is
- * mirrored.
- */
- uint16_t mirror_vnic_id;
- /*
- * This value indicates the tunnel type for this filter.
- * If this field is not specified, then the filter shall
- * apply to both non-tunneled and tunneled packets.
- * If this field conflicts with the tunnel_type specified
- * in the l2_filter_id, then the HWRM shall return an
- * error for this command.
- */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
- UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
- /*
- * This hint is provided to help in placing
- * the filter in the filter table.
- */
- uint8_t pri_hint;
- /* No preference */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+ uint8_t flags;
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX
+ /* Enumeration denoting the enable, disable eem flow aging configuration. */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM UINT32_C(0x2)
+ /* tx path */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_DISABLE \
+ (UINT32_C(0x0) << 1)
+ /* rx path */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE \
+ (UINT32_C(0x1) << 1)
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_LAST \
+ HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE
+ uint8_t unused_0;
+ /* The flow aging timer for all TCP flows, the unit is 100 milliseconds. */
+ uint32_t tcp_flow_timer;
+ /* The TCP finished timer for all TCP flows, the unit is 100 milliseconds. */
+ uint32_t tcp_fin_timer;
+ /* The flow aging timer for all UDP flows, the unit is 100 milliseconds. */
+ uint32_t udp_flow_timer;
+ /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
+ uint16_t eem_dma_interval;
+ /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
+ uint16_t eem_notice_interval;
+ /* The maximum entries number in the eem context memory. */
+ uint32_t eem_ctx_max_entries;
+ /* The context memory ID for eem flow aging. */
+ uint16_t eem_ctx_id;
+ uint16_t eem_ctx_mem_type;
+ /* The content of context memory is eem ejection data, the size of each entry is 4 bytes. */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA \
UINT32_C(0x0)
- /* Above the given filter */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \
- UINT32_C(0x1)
- /* Below the given filter */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \
- UINT32_C(0x2)
- /* As high as possible */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \
- UINT32_C(0x3)
- /* As low as possible */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \
- UINT32_C(0x4)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST
- /*
- * The value of source IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
- */
- uint32_t src_ipaddr[4];
- /*
- * The value of source IP address mask to be used in
- * filtering.
- * For IPv4, first four bytes represent the IP address mask.
- */
- uint32_t src_ipaddr_mask[4];
- /*
- * The value of destination IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
- */
- uint32_t dst_ipaddr[4];
- /*
- * The value of destination IP address mask to be used in
- * filtering.
- * For IPv4, first four bytes represent the IP address mask.
- */
- uint32_t dst_ipaddr_mask[4];
- /*
- * The value of source port to be used in filtering.
- * Applies to UDP and TCP traffic.
- */
- uint16_t src_port;
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_LAST \
+ HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_cfa_flow_aging_cfg_output (size:128b/16B) */
+struct hwrm_cfa_flow_aging_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
- * The value of source port mask to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint16_t src_port_mask;
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_cfa_flow_aging_qcfg *
+ ****************************/
+
+
+/* hwrm_cfa_flow_aging_qcfg_input (size:192b/24B) */
+struct hwrm_cfa_flow_aging_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * The value of destination port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint16_t dst_port;
+ uint16_t cmpl_ring;
/*
- * The value of destination port mask to be used in
- * filtering.
- * Applies to UDP and TCP traffic.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint16_t dst_port_mask;
+ uint16_t seq_id;
/*
- * This is the ID of the filter that goes along with
- * the pri_hint.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- uint64_t ntuple_filter_id_hint;
+ uint16_t target_id;
/*
- * The value of rfs_ring_tbl_idx to be used for RFS for this filter.
- * This index is used in lieu of the RSS hash when selecting the
- * index into the RSS table to determine the rx ring.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint16_t rfs_ring_tbl_idx;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ uint64_t resp_addr;
+ /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */
+ uint8_t flags;
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0[7];
+} __rte_packed;
-/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
-struct hwrm_cfa_ntuple_filter_alloc_output {
+/* hwrm_cfa_flow_aging_qcfg_output (size:320b/40B) */
+struct hwrm_cfa_flow_aging_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value is an opaque id into CFA data structures. */
- uint64_t ntuple_filter_id;
- /*
- * The flow id value in bit 0-29 is the actual ID of the flow
- * associated with this filter and it shall be used to match
- * and associate the flow identifier returned in completion
- * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
- * shall indicate no valid flow id.
- */
- uint32_t flow_id;
- /* Indicate the flow id value. */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
- UINT32_C(0x3fffffff)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
- /* Indicate type of the flow. */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
- UINT32_C(0x40000000)
- /*
- * If this bit set to 0, then it indicates that the flow is
- * internal flow.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
- (UINT32_C(0x0) << 30)
- /*
- * If this bit is set to 1, then it indicates that the flow is
- * external flow.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
- (UINT32_C(0x1) << 30)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
- /* Indicate the flow direction. */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
- UINT32_C(0x80000000)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
- (UINT32_C(0x0) << 31)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
- (UINT32_C(0x1) << 31)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
- uint8_t unused_0[3];
+ /* The current flow aging timer for all TCP flows, the unit is 100 millisecond. */
+ uint32_t tcp_flow_timer;
+ /* The current TCP finished timer for all TCP flows, the unit is 100 millisecond. */
+ uint32_t tcp_fin_timer;
+ /* The current flow aging timer for all UDP flows, the unit is 100 millisecond. */
+ uint32_t udp_flow_timer;
+ /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
+ uint16_t eem_dma_interval;
+ /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
+ uint16_t eem_notice_interval;
+ /* The maximum entries number in the eem context memory. */
+ uint32_t eem_ctx_max_entries;
+ /* The context memory ID for eem flow aging. */
+ uint16_t eem_ctx_id;
+ /* The context memory type for eem flow aging. */
+ uint16_t eem_ctx_mem_type;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
-
-/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */
-struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \
- UINT32_C(0x0)
- /* Unable to complete operation due to conflict with Rx Mask VLAN */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
- UINT32_C(0x1)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR
- uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
-/*******************************
- * hwrm_cfa_ntuple_filter_free *
- *******************************/
+/*****************************
+ * hwrm_cfa_flow_aging_qcaps *
+ *****************************/
-/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_ntuple_filter_free_input {
+/* hwrm_cfa_flow_aging_qcaps_input (size:192b/24B) */
+struct hwrm_cfa_flow_aging_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This value is an opaque id into CFA data structures. */
- uint64_t ntuple_filter_id;
-} __attribute__((packed));
+ /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */
+ uint8_t flags;
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0[7];
+} __rte_packed;
-/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_ntuple_filter_free_output {
+/* hwrm_cfa_flow_aging_qcaps_output (size:256b/32B) */
+struct hwrm_cfa_flow_aging_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* The maximum flow aging timer for all TCP flows, the unit is 100 millisecond. */
+ uint32_t max_tcp_flow_timer;
+ /* The maximum TCP finished timer for all TCP flows, the unit is 100 millisecond. */
+ uint32_t max_tcp_fin_timer;
+ /* The maximum flow aging timer for all UDP flows, the unit is 100 millisecond. */
+ uint32_t max_udp_flow_timer;
+ /* The maximum aging flows that HW can support. */
+ uint32_t max_aging_flows;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************************
- * hwrm_cfa_ntuple_filter_cfg *
- ******************************/
+/**********************************
+ * hwrm_cfa_tcp_flag_process_qcfg *
+ **********************************/
-/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */
-struct hwrm_cfa_ntuple_filter_cfg_input {
+/* hwrm_cfa_tcp_flag_process_qcfg_input (size:128b/16B) */
+struct hwrm_cfa_tcp_flag_process_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
- /*
- * This bit must be '1' for the new_dst_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \
- UINT32_C(0x1)
- /*
- * This bit must be '1' for the new_mirror_vnic_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
- UINT32_C(0x2)
- /*
- * This bit must be '1' for the new_meter_instance_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
- UINT32_C(0x4)
- uint32_t flags;
- /*
- * Setting this bit to 1 indicates that dest_id field contains FID.
- * Setting this to 0 indicates that dest_id field contains VNIC or VPORT.
- */
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \
- UINT32_C(0x1)
- /* This value is an opaque id into CFA data structures. */
- uint64_t ntuple_filter_id;
- /*
- * If set, this value shall represent the new
- * Logical VNIC ID of the destination VNIC for the RX
- * path and new network port id of the destination port for
- * the TX path.
- */
- uint32_t new_dst_id;
- /*
- * New Logical VNIC ID of the VNIC where traffic is
- * mirrored.
- */
- uint32_t new_mirror_vnic_id;
- /*
- * New meter to attach to the flow. Specifying the
- * invalid instance ID is used to remove any existing
- * meter from the flow.
- */
- uint16_t new_meter_instance_id;
- /*
- * A value of 0xfff is considered invalid and implies the
- * instance is not configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
- HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
- uint8_t unused_1[6];
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */
-struct hwrm_cfa_ntuple_filter_cfg_output {
+/* hwrm_cfa_tcp_flag_process_qcfg_output (size:192b/24B) */
+struct hwrm_cfa_tcp_flag_process_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* The port 0 RX mirror action record ID. */
+ uint16_t rx_ar_id_port0;
+ /* The port 1 RX mirror action record ID. */
+ uint16_t rx_ar_id_port1;
+ /* The port 0 RX action record ID for TX TCP flag packets from loopback path. */
+ uint16_t tx_ar_id_port0;
+ /* The port 1 RX action record ID for TX TCP flag packets from loopback path. */
+ uint16_t tx_ar_id_port1;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**************************
- * hwrm_cfa_em_flow_alloc *
- **************************/
+/**********************
+ * hwrm_cfa_pair_info *
+ **********************/
-/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */
-struct hwrm_cfa_em_flow_alloc_input {
+/* hwrm_cfa_pair_info_input (size:448b/56B) */
+struct hwrm_cfa_pair_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
*/
uint64_t resp_addr;
uint32_t flags;
+ /* If this flag is set, lookup by name else lookup by index. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
+ /* If this flag is set, lookup by PF id and VF id. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2)
+ /* Pair table index. */
+ uint16_t pair_index;
+ /* Pair pf index. */
+ uint8_t pair_pfid;
+ /* Pair vf index. */
+ uint8_t pair_vfid;
+ /* Pair name (32 byte string). */
+ char pair_name[32];
+} __rte_packed;
+
+/* hwrm_cfa_pair_info_output (size:576b/72B) */
+struct hwrm_cfa_pair_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Pair table index. */
+ uint16_t next_pair_index;
+ /* Pair member a's fid. */
+ uint16_t a_fid;
+ /* Logical host number. */
+ uint8_t host_a_index;
+ /* Logical PF number. */
+ uint8_t pf_a_index;
+ /* Pair member a's Linux logical VF number. */
+ uint16_t vf_a_index;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code_a;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action_a;
+ /* Pair member b's fid. */
+ uint16_t b_fid;
+ /* Logical host number. */
+ uint8_t host_b_index;
+ /* Logical PF number. */
+ uint8_t pf_b_index;
+ /* Pair member a's Linux logical VF number. */
+ uint16_t vf_b_index;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code_b;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action_b;
+ /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */
+ uint8_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR
+ /* Pair state. */
+ uint8_t pair_state;
+ /* Pair has been allocated */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
+ /* Both pair members are active */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
+ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
+ /* Pair name (32 byte string). */
+ char pair_name[32];
+ uint8_t unused_0[7];
/*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates enabling of a byte counter for a given
- * flow.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2)
- /*
- * Setting of this flag indicates enabling of a packet counter for a given
- * flow.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4)
- /* Setting of this flag indicates de-capsulation action for the given flow. */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8)
- /* Setting of this flag indicates encapsulation action for the given flow. */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10)
- /*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20)
- /*
- * Setting of this flag indicates that a meter is expected to be attached
- * to this flow. This hint can be used when choosing the action record
- * format required for the flow.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40)
- uint32_t enables;
- /*
- * This bit must be '1' for the l2_filter_id field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
- UINT32_C(0x1)
- /*
- * This bit must be '1' for the tunnel_type field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
- UINT32_C(0x2)
- /*
- * This bit must be '1' for the tunnel_id field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \
- UINT32_C(0x4)
- /*
- * This bit must be '1' for the src_macaddr field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \
- UINT32_C(0x8)
- /*
- * This bit must be '1' for the dst_macaddr field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \
- UINT32_C(0x10)
- /*
- * This bit must be '1' for the ovlan_vid field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \
- UINT32_C(0x20)
- /*
- * This bit must be '1' for the ivlan_vid field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \
- UINT32_C(0x40)
- /*
- * This bit must be '1' for the ethertype field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \
- UINT32_C(0x80)
- /*
- * This bit must be '1' for the src_ipaddr field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \
- UINT32_C(0x100)
- /*
- * This bit must be '1' for the dst_ipaddr field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \
- UINT32_C(0x200)
- /*
- * This bit must be '1' for the ipaddr_type field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
- UINT32_C(0x400)
- /*
- * This bit must be '1' for the ip_protocol field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
- UINT32_C(0x800)
- /*
- * This bit must be '1' for the src_port field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \
- UINT32_C(0x1000)
- /*
- * This bit must be '1' for the dst_port field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \
- UINT32_C(0x2000)
- /*
- * This bit must be '1' for the dst_id field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x4000)
- /*
- * This bit must be '1' for the mirror_vnic_id field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x8000)
- /*
- * This bit must be '1' for the encap_record_id field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \
- UINT32_C(0x10000)
- /*
- * This bit must be '1' for the meter_instance_id field to be
- * configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \
- UINT32_C(0x20000)
- /*
- * This value identifies a set of CFA data structures used for an L2
- * context.
- */
- uint64_t l2_filter_id;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
- UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
- uint8_t unused_0[3];
- /*
- * Tunnel identifier.
- * Virtual Network Identifier (VNI). Only valid with
- * tunnel_types VXLAN, NVGRE, and Geneve.
- * Only lower 24-bits of VNI field are used
- * in setting up the filter.
- */
- uint32_t tunnel_id;
- /*
- * This value indicates the source MAC address in
- * the Ethernet header.
- */
- uint8_t src_macaddr[6];
- /* The meter instance to attach to the flow. */
- uint16_t meter_instance_id;
- /*
- * A value of 0xfff is considered invalid and implies the
- * instance is not configured.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID
- /*
- * This value indicates the destination MAC address in
- * the Ethernet header.
- */
- uint8_t dst_macaddr[6];
- /*
- * This value indicates the VLAN ID of the outer VLAN tag
- * in the Ethernet header.
- */
- uint16_t ovlan_vid;
- /*
- * This value indicates the VLAN ID of the inner VLAN tag
- * in the Ethernet header.
- */
- uint16_t ivlan_vid;
- /* This value indicates the ethertype in the Ethernet header. */
- uint16_t ethertype;
- /*
- * This value indicates the type of IP address.
- * 4 - IPv4
- * 6 - IPv6
- * All others are invalid.
- */
- uint8_t ip_addr_type;
- /* invalid */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
- /* IPv4 */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4)
- /* IPv6 */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
- /*
- * The value of protocol filed in IP header.
- * Applies to UDP and TCP traffic.
- * 6 - TCP
- * 17 - UDP
- */
- uint8_t ip_protocol;
- /* invalid */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
- /* TCP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6)
- /* UDP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP
- uint8_t unused_1[2];
- /*
- * The value of source IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint32_t src_ipaddr[4];
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_cfa_vfr_alloc *
+ **********************/
+
+
+/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */
+struct hwrm_cfa_vfr_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * big_endian = True
- * The value of destination IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint32_t dst_ipaddr[4];
+ uint16_t cmpl_ring;
/*
- * The value of source port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint16_t src_port;
+ uint16_t seq_id;
/*
- * The value of destination port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- uint16_t dst_port;
+ uint16_t target_id;
/*
- * If set, this value shall represent the
- * Logical VNIC ID of the destination VNIC for the RX
- * path and network port id of the destination port for
- * the TX path.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint16_t dst_id;
+ uint64_t resp_addr;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_id;
/*
- * Logical VNIC ID of the VNIC where traffic is
- * mirrored.
+ * This field is reserved for the future use.
+ * It shall be set to 0.
*/
- uint16_t mirror_vnic_id;
- /* Logical ID of the encapsulation record. */
- uint32_t encap_record_id;
- uint8_t unused_2[4];
-} __attribute__((packed));
+ uint16_t reserved;
+ uint8_t unused_0[4];
+ /* VF Representor name (32 byte string). */
+ char vfr_name[32];
+} __rte_packed;
-/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */
-struct hwrm_cfa_em_flow_alloc_output {
+/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */
+struct hwrm_cfa_vfr_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value is an opaque id into CFA data structures. */
- uint64_t em_filter_id;
- /*
- * The flow id value in bit 0-29 is the actual ID of the flow
- * associated with this filter and it shall be used to match
- * and associate the flow identifier returned in completion
- * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
- * shall indicate no valid flow id.
- */
- uint32_t flow_id;
- /* Indicate the flow id value. */
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
- UINT32_C(0x3fffffff)
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
- /* Indicate type of the flow. */
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \
- UINT32_C(0x40000000)
- /*
- * If this bit set to 0, then it indicates that the flow is
- * internal flow.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
- (UINT32_C(0x0) << 30)
- /*
- * If this bit is set to 1, then it indicates that the flow is
- * external flow.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
- (UINT32_C(0x1) << 30)
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
- /* Indicate the flow direction. */
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \
- UINT32_C(0x80000000)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
- (UINT32_C(0x0) << 31)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
- (UINT32_C(0x1) << 31)
- #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action;
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*************************
- * hwrm_cfa_em_flow_free *
- *************************/
+/*********************
+ * hwrm_cfa_vfr_free *
+ *********************/
-/* hwrm_cfa_em_flow_free_input (size:192b/24B) */
-struct hwrm_cfa_em_flow_free_input {
+/* hwrm_cfa_vfr_free_input (size:448b/56B) */
+struct hwrm_cfa_vfr_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This value is an opaque id into CFA data structures. */
- uint64_t em_filter_id;
-} __attribute__((packed));
+ /* VF Representor name (32 byte string). */
+ char vfr_name[32];
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_id;
+ uint16_t reserved;
+ uint8_t unused_0[4];
+} __rte_packed;
-/* hwrm_cfa_em_flow_free_output (size:128b/16B) */
-struct hwrm_cfa_em_flow_free_output {
+/* hwrm_cfa_vfr_free_output (size:128b/16B) */
+struct hwrm_cfa_vfr_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/************************
- * hwrm_cfa_meter_qcaps *
- ************************/
-/* hwrm_cfa_meter_qcaps_input (size:128b/16B) */
-struct hwrm_cfa_meter_qcaps_input {
+/***************************************
+ * hwrm_cfa_redirect_query_tunnel_type *
+ ***************************************/
+
+
+/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */
+struct hwrm_cfa_redirect_query_tunnel_type_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+ /* The source function id. */
+ uint16_t src_fid;
+ uint8_t unused_0[6];
+} __rte_packed;
-/* hwrm_cfa_meter_qcaps_output (size:320b/40B) */
-struct hwrm_cfa_meter_qcaps_output {
+/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */
+struct hwrm_cfa_redirect_query_tunnel_type_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /*
- * Enumeration denoting the clock at which the Meter is running with.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_MASK UINT32_C(0xf)
- #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_SFT 0
- /* 375 MHz */
- #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_375MHZ UINT32_C(0x0)
- /* 625 MHz */
- #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ UINT32_C(0x1)
- #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_LAST \
- HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ
- uint8_t unused_0[4];
- /*
- * The minimum guaranteed number of tx meter profiles supported
- * for this function.
- */
- uint16_t min_tx_profile;
- /*
- * The maximum non-guaranteed number of tx meter profiles supported
- * for this function.
- */
- uint16_t max_tx_profile;
- /*
- * The minimum guaranteed number of rx meter profiles supported
- * for this function.
- */
- uint16_t min_rx_profile;
- /*
- * The maximum non-guaranteed number of rx meter profiles supported
- * for this function.
- */
- uint16_t max_rx_profile;
- /*
- * The minimum guaranteed number of tx meter instances supported
- * for this function.
- */
- uint16_t min_tx_instance;
- /*
- * The maximum non-guaranteed number of tx meter instances supported
- * for this function.
- */
- uint16_t max_tx_instance;
- /*
- * The minimum guaranteed number of rx meter instances supported
- * for this function.
- */
- uint16_t min_rx_instance;
- /*
- * The maximum non-guaranteed number of rx meter instances supported
- * for this function.
- */
- uint16_t max_rx_instance;
- uint8_t unused_1[7];
+ /* Tunnel Mask. */
+ uint32_t tunnel_mask;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \
+ UINT32_C(0x1)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \
+ UINT32_C(0x2)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \
+ UINT32_C(0x4)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \
+ UINT32_C(0x8)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \
+ UINT32_C(0x10)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \
+ UINT32_C(0x20)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \
+ UINT32_C(0x40)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \
+ UINT32_C(0x80)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \
+ UINT32_C(0x100)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \
+ UINT32_C(0x200)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \
+ UINT32_C(0x400)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \
+ UINT32_C(0x800)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \
+ UINT32_C(0x1000)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \
+ UINT32_C(0x2000)
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/********************************
- * hwrm_cfa_meter_profile_alloc *
- ********************************/
+/*************************
+ * hwrm_cfa_ctx_mem_rgtr *
+ *************************/
-/* hwrm_cfa_meter_profile_alloc_input (size:320b/40B) */
-struct hwrm_cfa_meter_profile_alloc_input {
+/* hwrm_cfa_ctx_mem_rgtr_input (size:256b/32B) */
+struct hwrm_cfa_ctx_mem_rgtr_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint8_t flags;
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G
+ uint32_t unused_0;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+} __rte_packed;
+
+/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_rgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
/*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
*/
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x1)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX
- /* The meter algorithm type. */
- uint8_t meter_type;
- /* RFC 2697 (srTCM) */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2697 \
- UINT32_C(0x0)
- /* RFC 2698 (trTCM) */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2698 \
- UINT32_C(0x1)
- /* RFC 4115 (trTCM) */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 \
- UINT32_C(0x2)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115
+ uint16_t ctx_id;
+ uint8_t unused_0[5];
/*
- * This field is reserved for the future use.
- * It shall be set to 0.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint16_t reserved1;
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_cfa_ctx_mem_unrgtr *
+ ***************************/
+
+
+/* hwrm_cfa_ctx_mem_unrgtr_input (size:192b/24B) */
+struct hwrm_cfa_ctx_mem_unrgtr_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * This field is reserved for the future use.
- * It shall be set to 0.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint32_t reserved2;
- /* A meter rate specified in bytes-per-second. */
- uint32_t commit_rate;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Raw value */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW
- /* A meter burst size specified in bytes. */
- uint32_t commit_burst;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid value */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
- /* A meter rate specified in bytes-per-second. */
- uint32_t excess_peak_rate;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Raw unit */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW
- /* A meter burst size specified in bytes. */
- uint32_t excess_peak_burst;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
-} __attribute__((packed));
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
+} __rte_packed;
-/* hwrm_cfa_meter_profile_alloc_output (size:128b/16B) */
-struct hwrm_cfa_meter_profile_alloc_output {
+/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_unrgtr_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value identifies a meter profile in CFA. */
- uint16_t meter_profile_id;
- /*
- * A value of 0xfff is considered invalid and implies the
- * profile is not configured.
- */
- #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID
- uint8_t unused_0[5];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************************
- * hwrm_cfa_meter_profile_free *
- *******************************/
+/*************************
+ * hwrm_cfa_ctx_mem_qctx *
+ *************************/
-/* hwrm_cfa_meter_profile_free_input (size:192b/24B) */
-struct hwrm_cfa_meter_profile_free_input {
+/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */
+struct hwrm_cfa_ctx_mem_qctx_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint8_t flags;
/*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
*/
- #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x1)
- #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX
- uint8_t unused_0;
- /* This value identifies a meter profile in CFA. */
- uint16_t meter_profile_id;
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
+struct hwrm_cfa_ctx_mem_qctx_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G
+ uint8_t unused_0[4];
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ uint8_t unused_1[7];
/*
- * A value of 0xfff is considered invalid and implies the
- * profile is not configured.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_LAST \
- HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID
- uint8_t unused_1[4];
-} __attribute__((packed));
+ uint8_t valid;
+} __rte_packed;
-/* hwrm_cfa_meter_profile_free_output (size:128b/16B) */
-struct hwrm_cfa_meter_profile_free_output {
+/**************************
+ * hwrm_cfa_ctx_mem_qcaps *
+ **************************/
+
+
+/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* Indicates the maximum number of context memory which can be registered. */
+ uint16_t max_entries;
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************************
- * hwrm_cfa_meter_profile_cfg *
- ******************************/
+/**********************
+ * hwrm_cfa_eem_qcaps *
+ **********************/
-/* hwrm_cfa_meter_profile_cfg_input (size:320b/40B) */
-struct hwrm_cfa_meter_profile_cfg_input {
+/* hwrm_cfa_eem_qcaps_input (size:192b/24B) */
+struct hwrm_cfa_eem_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint8_t flags;
+ uint32_t flags;
/*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
*/
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX
- /* The meter algorithm type. */
- uint8_t meter_type;
- /* RFC 2697 (srTCM) */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2697 \
- UINT32_C(0x0)
- /* RFC 2698 (trTCM) */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2698 \
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_TX \
UINT32_C(0x1)
- /* RFC 4115 (trTCM) */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 \
- UINT32_C(0x2)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115
- /* This value identifies a meter profile in CFA. */
- uint16_t meter_profile_id;
- /*
- * A value of 0xfff is considered invalid and implies the
- * profile is not configured.
- */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID
/*
- * This field is reserved for the future use.
- * It shall be set to 0.
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
*/
- uint32_t reserved;
- /* A meter rate specified in bytes-per-second. */
- uint32_t commit_rate;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Raw value */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW
- /* A meter burst size specified in bytes. */
- uint32_t commit_burst;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid value */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
- /* A meter rate specified in bytes-per-second. */
- uint32_t excess_peak_rate;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Raw unit */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW
- /* A meter burst size specified in bytes. */
- uint32_t excess_peak_burst;
- /* The bandwidth value. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
- 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE \
- UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
- (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
- (UINT32_C(0x1) << 28)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
- 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
-} __attribute__((packed));
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ uint32_t unused_0;
+} __rte_packed;
-/* hwrm_cfa_meter_profile_cfg_output (size:128b/16B) */
-struct hwrm_cfa_meter_profile_cfg_output {
+/* hwrm_cfa_eem_qcaps_output (size:320b/40B) */
+struct hwrm_cfa_eem_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, indicates the the FW supports the Centralized
+ * Memory Model. The concept designates one entity for the
+ * memory allocation while all others ‘subscribe’ to it.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, indicates the the FW supports the Detached
+ * Centralized Memory Model. The memory is allocated and managed
+ * as a separate entity. All PFs and VFs will be granted direct
+ * or semi-direct access to the allocated memory while none of
+ * which can interfere with the management of the memory.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x8)
+ uint32_t unused_0;
+ uint32_t supported;
+ /*
+ * If set to 1, then EEM KEY0 table is supported using crc32 hash.
+ * If set to 0, EEM KEY0 table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then EEM KEY1 table is supported using lookup3 hash.
+ * If set to 0, EEM KEY1 table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then EEM External Record table is supported.
+ * If set to 0, EEM External Record table is not supported.
+ * (This table includes action record, EFC pointers, encap pointers)
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, then EEM External Flow Counters table is supported.
+ * If set to 0, EEM External Flow Counters table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, then FID table used for implicit flow flush is supported.
+ * If set to 0, then FID table used for implicit flow flush is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
+ UINT32_C(0x10)
+ /*
+ * The maximum number of entries supported by EEM. When configuring the host memory
+ * the number of numbers of entries that can supported are -
+ * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries.
+ * Any value that are not these values, the FW will round down to the closest support
+ * number of entries.
+ */
+ uint32_t max_entries_supported;
+ /* The entry size in bytes of each entry in the EEM KEY0/KEY1 tables. */
+ uint16_t key_entry_size;
+ /* The entry size in bytes of each entry in the EEM RECORD tables. */
+ uint16_t record_entry_size;
+ /* The entry size in bytes of each entry in the EEM EFC tables. */
+ uint16_t efc_entry_size;
+ /* The FID size in bytes of each entry in the EEM FID tables. */
+ uint16_t fid_entry_size;
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*********************************
- * hwrm_cfa_meter_instance_alloc *
- *********************************/
+/********************
+ * hwrm_cfa_eem_cfg *
+ ********************/
-/* hwrm_cfa_meter_instance_alloc_input (size:192b/24B) */
-struct hwrm_cfa_meter_instance_alloc_input {
+/* hwrm_cfa_eem_cfg_input (size:384b/48B) */
+struct hwrm_cfa_eem_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint8_t flags;
+ uint32_t flags;
/*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ /* When set to 1, secondary, 0 means primary. */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_SECONDARY_PF \
+ UINT32_C(0x8)
+ /*
+ * Group_id which used by Firmware to identify memory pools belonging
+ * to certain group.
*/
- #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH \
- UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x1)
- #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX
- uint8_t unused_0;
- /* This value identifies a meter profile in CFA. */
- uint16_t meter_profile_id;
+ uint16_t group_id;
+ uint16_t unused_0;
/*
- * A value of 0xffff is considered invalid and implies the
- * profile is not configured.
+ * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
+ * RECORD, EFC all have the same number of entries and all tables will be configured
+ * using this value. Current minimum value is 32k. Current maximum value is 128M.
*/
- #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_LAST \
- HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID
- uint8_t unused_1[4];
-} __attribute__((packed));
+ uint32_t num_entries;
+ uint32_t unused_1;
+ /* Configured EEM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EEM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EEM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ uint16_t unused_2;
+ uint32_t unused_3;
+} __rte_packed;
-/* hwrm_cfa_meter_instance_alloc_output (size:128b/16B) */
-struct hwrm_cfa_meter_instance_alloc_output {
+/* hwrm_cfa_eem_cfg_output (size:128b/16B) */
+struct hwrm_cfa_eem_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value identifies a meter instance in CFA. */
- uint16_t meter_instance_id;
- /*
- * A value of 0xffff is considered invalid and implies the
- * instance is not configured.
- */
- #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_LAST \
- HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID
- uint8_t unused_0[5];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************************
- * hwrm_cfa_meter_instance_cfg *
- *******************************/
+/*********************
+ * hwrm_cfa_eem_qcfg *
+ *********************/
-/* hwrm_cfa_meter_instance_cfg_input (size:192b/24B) */
-struct hwrm_cfa_meter_instance_cfg_input {
+/* hwrm_cfa_eem_qcfg_input (size:192b/24B) */
+struct hwrm_cfa_eem_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint8_t flags;
- /*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x1)
- #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX
- uint8_t unused_0;
- /*
- * This value identifies a new meter profile to be associated with
- * the meter instance specified in this command.
- */
- uint16_t meter_profile_id;
- /*
- * A value of 0xffff is considered invalid and implies the
- * profile is not configured.
- */
- #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_LAST \
- HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID
- /*
- * This value identifies the ID of a meter instance that needs to be updated with
- * a new meter profile specified in this command.
- */
- uint16_t meter_instance_id;
- uint8_t unused_1[2];
-} __attribute__((packed));
+ uint32_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint32_t unused_0;
+} __rte_packed;
-/* hwrm_cfa_meter_instance_cfg_output (size:128b/16B) */
-struct hwrm_cfa_meter_instance_cfg_output {
+/* hwrm_cfa_eem_qcfg_output (size:256b/32B) */
+struct hwrm_cfa_eem_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ uint32_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ /* The number of entries the FW has configured for EEM. */
+ uint32_t num_entries;
+ /* Configured EEM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EEM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EEM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ uint8_t unused_2[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/********************************
- * hwrm_cfa_meter_instance_free *
- ********************************/
+/*******************
+ * hwrm_cfa_eem_op *
+ *******************/
-/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */
-struct hwrm_cfa_meter_instance_free_input {
+/* hwrm_cfa_eem_op_input (size:192b/24B) */
+struct hwrm_cfa_eem_op_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint8_t flags;
+ uint32_t flags;
/*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
+ * When set to 1, indicates the host memory which is passed will be
+ * used for the TX flow offload function specified in fid.
+ * Note if this bit is set then the path_rx bit can't be set.
*/
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x1)
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX
- uint8_t unused_0;
- /* This value identifies a meter instance in CFA. */
- uint16_t meter_instance_id;
+ #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
/*
- * A value of 0xfff is considered invalid and implies the
- * instance is not configured.
+ * When set to 1, indicates the host memory which is passed will be
+ * used for the RX flow offload function specified in fid.
+ * Note if this bit is set then the path_tx bit can't be set.
*/
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \
- HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID
- uint8_t unused_1[4];
-} __attribute__((packed));
+ #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint16_t unused_0;
+ /* The number of EEM key table entries to be configured. */
+ uint16_t op;
+ /* This value is reserved and should not be used. */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
+ /*
+ * To properly stop EEM and ensure there are no DMA's, the caller
+ * must disable EEM for the given PF, using this call. This will
+ * safely disable EEM and ensure that all DMA'ed to the
+ * keys/records/efc have been completed.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_DISABLE UINT32_C(0x1)
+ /*
+ * Once the EEM host memory has been configured, EEM options have
+ * been configured. Then the caller should enable EEM for the given
+ * PF. Note once this call has been made, then the EEM mechanism
+ * will be active and DMA's will occur as packets are processed.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2)
+ /*
+ * Clear EEM settings for the given PF so that the register values
+ * are reset back to there initial state.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3)
+ #define HWRM_CFA_EEM_OP_INPUT_OP_LAST \
+ HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP
+} __rte_packed;
-/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */
-struct hwrm_cfa_meter_instance_free_output {
+/* hwrm_cfa_eem_op_output (size:128b/16B) */
+struct hwrm_cfa_eem_op_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************************
- * hwrm_cfa_decap_filter_alloc *
- *******************************/
+/********************************
+ * hwrm_cfa_adv_flow_mgnt_qcaps *
+ ********************************/
-/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */
-struct hwrm_cfa_decap_filter_alloc_input {
+/* hwrm_cfa_adv_flow_mgnt_qcaps_input (size:256b/32B) */
+struct hwrm_cfa_adv_flow_mgnt_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint32_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */
+struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
uint32_t flags;
- /* ovs_tunnel is 1 b */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \
- UINT32_C(0x1)
- uint32_t enables;
/*
- * This bit must be '1' for the tunnel_type field to be
- * configured.
+ * Value of 1 to indicate firmware support 16-bit flow handle.
+ * Value of 0 to indicate firmware not support 16-bit flow handle.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_16BIT_SUPPORTED \
UINT32_C(0x1)
/*
- * This bit must be '1' for the tunnel_id field to be
- * configured.
+ * Value of 1 to indicate firmware support 64-bit flow handle.
+ * Value of 0 to indicate firmware not support 64-bit flow handle.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \
UINT32_C(0x2)
/*
- * This bit must be '1' for the src_macaddr field to be
- * configured.
+ * Value of 1 to indicate firmware support flow batch delete operation through
+ * HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 to indicate that the firmware does not support flow batch delete
+ * operation.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \
UINT32_C(0x4)
/*
- * This bit must be '1' for the dst_macaddr field to be
- * configured.
+ * Value of 1 to indicate that the firmware support flow reset all operation through
+ * HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 indicates firmware does not support flow reset all operation.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \
UINT32_C(0x8)
/*
- * This bit must be '1' for the ovlan_vid field to be
- * configured.
+ * Value of 1 to indicate that firmware supports use of FID as dest_id in
+ * HWRM_CFA_NTUPLE_ALLOC/CFG commands.
+ * Value of 0 indicates firmware does not support use of FID as dest_id.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_OVLAN_VID \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \
UINT32_C(0x10)
/*
- * This bit must be '1' for the ivlan_vid field to be
- * configured.
+ * Value of 1 to indicate that firmware supports TX EEM flows.
+ * Value of 0 indicates firmware does not support TX EEM flows.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IVLAN_VID \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TX_EEM_FLOW_SUPPORTED \
UINT32_C(0x20)
/*
- * This bit must be '1' for the t_ovlan_vid field to be
- * configured.
+ * Value of 1 to indicate that firmware supports RX EEM flows.
+ * Value of 0 indicates firmware does not support RX EEM flows.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_OVLAN_VID \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \
UINT32_C(0x40)
/*
- * This bit must be '1' for the t_ivlan_vid field to be
- * configured.
+ * Value of 1 to indicate that firmware supports the dynamic allocation of an
+ * on-chip flow counter which can be used for EEM flows.
+ * Value of 0 indicates firmware does not support the dynamic allocation of an
+ * on-chip flow counter.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_IVLAN_VID \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_COUNTER_ALLOC_SUPPORTED \
UINT32_C(0x80)
/*
- * This bit must be '1' for the ethertype field to be
- * configured.
+ * Value of 1 to indicate that firmware supports setting of
+ * rfs_ring_tbl_idx in HWRM_CFA_NTUPLE_ALLOC command.
+ * Value of 0 indicates firmware does not support rfs_ring_tbl_idx.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_SUPPORTED \
UINT32_C(0x100)
/*
- * This bit must be '1' for the src_ipaddr field to be
- * configured.
+ * Value of 1 to indicate that firmware supports untagged matching
+ * criteria on HWRM_CFA_L2_FILTER_ALLOC command. Value of 0
+ * indicates firmware does not support untagged matching.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_UNTAGGED_VLAN_SUPPORTED \
UINT32_C(0x200)
/*
- * This bit must be '1' for the dst_ipaddr field to be
- * configured.
+ * Value of 1 to indicate that firmware supports XDP filter. Value
+ * of 0 indicates firmware does not support XDP filter.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_XDP_SUPPORTED \
UINT32_C(0x400)
/*
- * This bit must be '1' for the ipaddr_type field to be
- * configured.
+ * Value of 1 to indicate that the firmware support L2 header source
+ * fields matching criteria on HWRM_CFA_L2_FILTER_ALLOC command.
+ * Value of 0 indicates firmware does not support L2 header source
+ * fields matching.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \
UINT32_C(0x800)
/*
- * This bit must be '1' for the ip_protocol field to be
- * configured.
+ * If set to 1, firmware is capable of supporting ARP ethertype as
+ * matching criteria for HWRM_CFA_NTUPLE_FILTER_ALLOC command on the
+ * RX direction. By default, this flag should be 0 for older version
+ * of firmware.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ARP_SUPPORTED \
UINT32_C(0x1000)
/*
- * This bit must be '1' for the src_port field to be
- * configured.
+ * Value of 1 to indicate that firmware supports setting of
+ * rfs_ring_tbl_idx in dst_id field of the HWRM_CFA_NTUPLE_ALLOC
+ * command. Value of 0 indicates firmware does not support
+ * rfs_ring_tbl_idx in dst_id field.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_V2_SUPPORTED \
UINT32_C(0x2000)
/*
- * This bit must be '1' for the dst_port field to be
- * configured.
+ * If set to 1, firmware is capable of supporting IPv4/IPv6 as
+ * ethertype in HWRM_CFA_NTUPLE_FILTER_ALLOC command on the RX
+ * direction. By default, this flag should be 0 for older version
+ * of firmware.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ETHERTYPE_IP_SUPPORTED \
UINT32_C(0x4000)
+ uint8_t unused_0[3];
/*
- * This bit must be '1' for the dst_id field to be
- * configured.
- */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x8000)
- /*
- * This bit must be '1' for the mirror_vnic_id field to be
- * configured.
- */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x10000)
- /*
- * Tunnel identifier.
- * Virtual Network Identifier (VNI). Only valid with
- * tunnel_types VXLAN, NVGRE, and Geneve.
- * Only lower 24-bits of VNI field are used
- * in setting up the filter.
- */
- uint32_t tunnel_id;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
- UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
- uint8_t unused_0;
- uint16_t unused_1;
- /*
- * This value indicates the source MAC address in
- * the Ethernet header.
- */
- uint8_t src_macaddr[6];
- uint8_t unused_2[2];
- /*
- * This value indicates the destination MAC address in
- * the Ethernet header.
- */
- uint8_t dst_macaddr[6];
- /*
- * This value indicates the VLAN ID of the outer VLAN tag
- * in the Ethernet header.
- */
- uint16_t ovlan_vid;
- /*
- * This value indicates the VLAN ID of the inner VLAN tag
- * in the Ethernet header.
- */
- uint16_t ivlan_vid;
- /*
- * This value indicates the VLAN ID of the outer VLAN tag
- * in the tunnel Ethernet header.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint16_t t_ovlan_vid;
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_cfa_tflib *
+ ******************/
+
+
+/* hwrm_cfa_tflib_input (size:1024b/128B) */
+struct hwrm_cfa_tflib_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * This value indicates the VLAN ID of the inner VLAN tag
- * in the tunnel Ethernet header.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint16_t t_ivlan_vid;
- /* This value indicates the ethertype in the Ethernet header. */
- uint16_t ethertype;
+ uint16_t cmpl_ring;
/*
- * This value indicates the type of IP address.
- * 4 - IPv4
- * 6 - IPv6
- * All others are invalid.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint8_t ip_addr_type;
- /* invalid */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
- UINT32_C(0x0)
- /* IPv4 */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
- UINT32_C(0x4)
- /* IPv6 */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
- UINT32_C(0x6)
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
- HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ uint16_t seq_id;
/*
- * The value of protocol filed in IP header.
- * Applies to UDP and TCP traffic.
- * 6 - TCP
- * 17 - UDP
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- uint8_t ip_protocol;
- /* invalid */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
- UINT32_C(0x0)
- /* TCP */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
- UINT32_C(0x6)
- /* UDP */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
- UINT32_C(0x11)
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
- HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
- uint16_t unused_3;
- uint32_t unused_4;
+ uint16_t target_id;
/*
- * The value of source IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint32_t src_ipaddr[4];
+ uint64_t resp_addr;
+ /* TFLIB message type. */
+ uint16_t tf_type;
+ /* TFLIB message subtype. */
+ uint16_t tf_subtype;
+ /* unused. */
+ uint8_t unused0[4];
+ /* TFLIB request data. */
+ uint32_t tf_req[26];
+} __rte_packed;
+
+/* hwrm_cfa_tflib_output (size:5632b/704B) */
+struct hwrm_cfa_tflib_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* TFLIB message type. */
+ uint16_t tf_type;
+ /* TFLIB message subtype. */
+ uint16_t tf_subtype;
+ /* TFLIB response code */
+ uint32_t tf_resp_code;
+ /* TFLIB response data. */
+ uint32_t tf_resp[170];
+ /* unused. */
+ uint8_t unused1[7];
/*
- * The value of destination IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint32_t dst_ipaddr[4];
+ uint8_t valid;
+} __rte_packed;
+
+/***********
+ * hwrm_tf *
+ ***********/
+
+
+/* hwrm_tf_input (size:1024b/128B) */
+struct hwrm_tf_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * The value of source port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint16_t src_port;
+ uint16_t cmpl_ring;
/*
- * The value of destination port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint16_t dst_port;
+ uint16_t seq_id;
/*
- * If set, this value shall represent the
- * Logical VNIC ID of the destination VNIC for the RX
- * path.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- uint16_t dst_id;
+ uint16_t target_id;
/*
- * If set, this value shall represent the L2 context that matches the L2
- * information of the decap filter.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint16_t l2_ctxt_ref_id;
-} __attribute__((packed));
+ uint64_t resp_addr;
+ /* TF message type. */
+ uint16_t type;
+ /* TF message subtype. */
+ uint16_t subtype;
+ /* unused. */
+ uint8_t unused0[4];
+ /* TF request data. */
+ uint32_t req[26];
+} __rte_packed;
-/* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */
-struct hwrm_cfa_decap_filter_alloc_output {
+/* hwrm_tf_output (size:5632b/704B) */
+struct hwrm_tf_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value is an opaque id into CFA data structures. */
- uint32_t decap_filter_id;
- uint8_t unused_0[3];
+ /* TF message type. */
+ uint16_t type;
+ /* TF message subtype. */
+ uint16_t subtype;
+ /* TF response code */
+ uint32_t resp_code;
+ /* TF response data. */
+ uint32_t resp[170];
+ /* unused. */
+ uint8_t unused1[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************************
- * hwrm_cfa_decap_filter_free *
- ******************************/
+/***********************
+ * hwrm_tf_version_get *
+ ***********************/
-/* hwrm_cfa_decap_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_decap_filter_free_input {
+/* hwrm_tf_version_get_input (size:128b/16B) */
+struct hwrm_tf_version_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This value is an opaque id into CFA data structures. */
- uint32_t decap_filter_id;
- uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_cfa_decap_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_decap_filter_free_output {
+/* hwrm_tf_version_get_output (size:128b/16B) */
+struct hwrm_tf_version_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* Version Major number. */
+ uint8_t major;
+ /* Version Minor number. */
+ uint8_t minor;
+ /* Version Update number. */
+ uint8_t update;
+ /* unused. */
+ uint8_t unused0[4];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***********************
- * hwrm_cfa_flow_alloc *
- ***********************/
+/************************
+ * hwrm_tf_session_open *
+ ************************/
-/* hwrm_cfa_flow_alloc_input (size:1024b/128B) */
-struct hwrm_cfa_flow_alloc_input {
+/* hwrm_tf_session_open_input (size:640b/80B) */
+struct hwrm_tf_session_open_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint16_t flags;
- /* tunnel is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_TUNNEL \
- UINT32_C(0x1)
- /* num_vlan is 2 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_MASK \
- UINT32_C(0x6)
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_SFT 1
- /* no tags */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_NONE \
- (UINT32_C(0x0) << 1)
- /* 1 tag */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_ONE \
- (UINT32_C(0x1) << 1)
- /* 2 tags */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO \
- (UINT32_C(0x2) << 1)
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_LAST \
- HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO
- /* Enumeration denoting the Flow Type. */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_MASK \
- UINT32_C(0x38)
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_SFT 3
- /* L2 flow */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_L2 \
- (UINT32_C(0x0) << 3)
- /* IPV4 flow */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV4 \
- (UINT32_C(0x1) << 3)
- /* IPV6 flow */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 \
- (UINT32_C(0x2) << 3)
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \
- HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6
- /*
- * when set to 1, indicates TX flow offload for function specified in src_fid and
- * the dst_fid should be set to invalid value. To indicate a VM to VM flow, both
- * of the path_tx and path_rx flags need to be set. For virtio vSwitch offload
- * case, the src_fid and dst_fid is set to the same fid value. For the SRIOV
- * vSwitch offload case, the src_fid and dst_fid must be set to the same VF FID
- * belong to the children VFs of the same PF to indicate VM to VM flow.
- */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x40)
+ /* Name of the session. */
+ uint8_t session_name[64];
+} __rte_packed;
+
+/* hwrm_tf_session_open_output (size:192b/24B) */
+struct hwrm_tf_session_open_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
/*
- * when set to 1, indicates RX flow offload for function specified in dst_fid and
- * the src_fid should be set to invalid value.
+ * Unique session identifier for the session created by the
+ * firmware.
*/
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x80)
+ uint32_t fw_session_id;
/*
- * Set to 1 to indicate matching of VXLAN VNI from the custom vxlan header is
- * required and the VXLAN VNI value is stored in the first 24 bits of the dmac field.
- * This flag is only valid when the flow direction is RX.
+ * Unique session client identifier for the first client on
+ * the newly created session.
*/
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_MATCH_VXLAN_IP_VNI \
- UINT32_C(0x100)
- /* Set to 1 to indicate vhost_id is specified in the outer_vlan_tci field. */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_VHOST_ID_USE_VLAN \
- UINT32_C(0x200)
+ uint32_t fw_session_client_id;
+ /* unused. */
+ uint32_t unused0;
+ /* unused. */
+ uint8_t unused1[3];
/*
- * Tx Flow: vf fid.
- * Rx Flow: pf fid.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
- uint16_t src_fid;
- /* Tunnel handle valid when tunnel flag is set. */
- uint32_t tunnel_handle;
- uint16_t action_flags;
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_tf_session_attach *
+ **************************/
+
+
+/* hwrm_tf_session_attach_input (size:704b/88B) */
+struct hwrm_tf_session_attach_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \
- UINT32_C(0x1)
- /* recycle is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \
- UINT32_C(0x2)
+ uint16_t cmpl_ring;
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \
- UINT32_C(0x4)
- /* meter is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_METER \
- UINT32_C(0x8)
- /* tunnel is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL \
- UINT32_C(0x10)
- /* nat_src is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_SRC \
- UINT32_C(0x20)
- /* nat_dest is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_DEST \
- UINT32_C(0x40)
- /* nat_ipv4_address is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_IPV4_ADDRESS \
- UINT32_C(0x80)
- /* l2_header_rewrite is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_L2_HEADER_REWRITE \
- UINT32_C(0x100)
- /* ttl_decrement is 1 b */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \
- UINT32_C(0x200)
+ uint16_t seq_id;
/*
- * If set to 1 and flow direction is TX, it indicates decap of L2 header
- * and encap of tunnel header. If set to 1 and flow direction is RX, it
- * indicates decap of tunnel header and encap L2 header. The type of tunnel
- * is specified in the tunnel_type field.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL_IP \
- UINT32_C(0x400)
- /* If set to 1, flow aging is enabled for this flow. */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FLOW_AGING_ENABLED \
- UINT32_C(0x800)
+ uint16_t target_id;
/*
- * If set to 1 an attempt will be made to try to offload this flow to the
- * most optimal flow table resource. If set to 0, the flow will be
- * placed to the default flow table resource.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \
- UINT32_C(0x1000)
+ uint64_t resp_addr;
/*
- * If set to 1 there will be no attempt to allocate an on-chip try to
- * offload this flow. If set to 0, which will keep compatibility with the
- * older drivers, will cause the FW to attempt to allocate an on-chip flow
- * counter for the newly created flow. This will keep the existing behavior
- * with EM flows which always had an associated flow counter.
+ * Unique session identifier for the session that the attach
+ * request want to attach to. This value originates from the
+ * shared session memory that the attach request opened by
+ * way of the 'attach name' that was passed in to the core
+ * attach API.
+ * The fw_session_id of the attach session includes PCIe bus
+ * info to distinguish the PF and session info to identify
+ * the associated TruFlow session.
*/
- #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NO_FLOW_COUNTER_ALLOC \
- UINT32_C(0x2000)
+ uint32_t attach_fw_session_id;
+ /* unused. */
+ uint32_t unused0;
+ /* Name of the session it self. */
+ uint8_t session_name[64];
+} __rte_packed;
+
+/* hwrm_tf_session_attach_output (size:128b/16B) */
+struct hwrm_tf_session_attach_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
/*
- * Tx Flow: pf or vf fid.
- * Rx Flow: vf fid.
+ * Unique session identifier for the session created by the
+ * firmware. It includes PCIe bus info to distinguish the PF
+ * and session info to identify the associated TruFlow
+ * session. This fw_session_id is unique to the attach
+ * request.
*/
- uint16_t dst_fid;
- /* VLAN tpid, valid when push_vlan flag is set. */
- uint16_t l2_rewrite_vlan_tpid;
- /* VLAN tci, valid when push_vlan flag is set. */
- uint16_t l2_rewrite_vlan_tci;
- /* Meter id, valid when meter flag is set. */
- uint16_t act_meter_id;
- /* Flow with the same l2 context tcam key. */
- uint16_t ref_flow_handle;
- /* This value sets the match value for the ethertype. */
- uint16_t ethertype;
- /* valid when num tags is 1 or 2. */
- uint16_t outer_vlan_tci;
- /* This value sets the match value for the Destination MAC address. */
- uint16_t dmac[3];
- /* valid when num tags is 2. */
- uint16_t inner_vlan_tci;
- /* This value sets the match value for the Source MAC address. */
- uint16_t smac[3];
- /* The bit length of destination IP address mask. */
- uint8_t ip_dst_mask_len;
- /* The bit length of source IP address mask. */
- uint8_t ip_src_mask_len;
- /* The value of destination IPv4/IPv6 address. */
- uint32_t ip_dst[4];
- /* The source IPv4/IPv6 address. */
- uint32_t ip_src[4];
+ uint32_t fw_session_id;
+ /* unused. */
+ uint8_t unused0[3];
/*
- * The value of source port.
- * Applies to UDP and TCP traffic.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
- uint16_t l4_src_port;
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_tf_session_register *
+ ****************************/
+
+
+/* hwrm_tf_session_register_input (size:704b/88B) */
+struct hwrm_tf_session_register_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * The value of source port mask.
- * Applies to UDP and TCP traffic.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint16_t l4_src_port_mask;
+ uint16_t cmpl_ring;
/*
- * The value of destination port.
- * Applies to UDP and TCP traffic.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint16_t l4_dst_port;
+ uint16_t seq_id;
/*
- * The value of destination port mask.
- * Applies to UDP and TCP traffic.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- uint16_t l4_dst_port_mask;
+ uint16_t target_id;
/*
- * NAT IPv4/6 address based on address type flag.
- * 0 values are ignored.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint32_t nat_ip_address[4];
- /* L2 header re-write Destination MAC address. */
- uint16_t l2_rewrite_dmac[3];
+ uint64_t resp_addr;
/*
- * The NAT source/destination port based on direction flag.
- * Applies to UDP and TCP traffic.
- * 0 values are ignored.
+ * Unique session identifier for the session that the
+ * register request want to create a new client on. This
+ * value originates from the first open request.
+ * The fw_session_id of the attach session includes PCIe bus
+ * info to distinguish the PF and session info to identify
+ * the associated TruFlow session.
*/
- uint16_t nat_port;
- /* L2 header re-write Source MAC address. */
- uint16_t l2_rewrite_smac[3];
- /* The value of ip protocol. */
- uint8_t ip_proto;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
- UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
-} __attribute__((packed));
+ uint32_t fw_session_id;
+ /* unused. */
+ uint32_t unused0;
+ /* Name of the session client. */
+ uint8_t session_client_name[64];
+} __rte_packed;
-/* hwrm_cfa_flow_alloc_output (size:256b/32B) */
-struct hwrm_cfa_flow_alloc_output {
+/* hwrm_tf_session_register_output (size:128b/16B) */
+struct hwrm_tf_session_register_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Flow record index. */
- uint16_t flow_handle;
- uint8_t unused_0[2];
- /*
- * The flow id value in bit 0-29 is the actual ID of the flow
- * associated with this filter and it shall be used to match
- * and associate the flow identifier returned in completion
- * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
- * shall indicate no valid flow id.
- */
- uint32_t flow_id;
- /* Indicate the flow id value. */
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
- UINT32_C(0x3fffffff)
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
- /* Indicate type of the flow. */
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \
- UINT32_C(0x40000000)
- /*
- * If this bit set to 0, then it indicates that the flow is
- * internal flow.
- */
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
- (UINT32_C(0x0) << 30)
/*
- * If this bit is set to 1, then it indicates that the flow is
- * external flow.
+ * Unique session client identifier for the session created
+ * by the firmware. It includes the session the client it
+ * attached to and session client info.
*/
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
- (UINT32_C(0x1) << 30)
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
- HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
- /* Indicate the flow direction. */
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \
- UINT32_C(0x80000000)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
- (UINT32_C(0x0) << 31)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
- (UINT32_C(0x1) << 31)
- #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
- HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX
- /* This value identifies a set of CFA data structures used for a flow. */
- uint64_t ext_flow_handle;
- uint32_t flow_counter_id;
- uint8_t unused_1[3];
+ uint32_t fw_session_client_id;
+ /* unused. */
+ uint8_t unused0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_cfa_flow_alloc_cmd_err (size:64b/8B) */
-struct hwrm_cfa_flow_alloc_cmd_err {
+/******************************
+ * hwrm_tf_session_unregister *
+ ******************************/
+
+
+/* hwrm_tf_session_unregister_input (size:192b/24B) */
+struct hwrm_tf_session_unregister_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint8_t code;
- /* Unknown error */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
- /* No more L2 Context TCAM */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_L2_CONTEXT_TCAM UINT32_C(0x1)
- /* No more action records */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_ACTION_RECORD UINT32_C(0x2)
- /* No more flow counters */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_COUNTER UINT32_C(0x3)
- /* No more wild-card TCAM */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_WILD_CARD_TCAM UINT32_C(0x4)
- /* Hash collsion in exact match tables */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_HASH_COLLISION UINT32_C(0x5)
- /* Key is already installed */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_KEY_EXISTS UINT32_C(0x6)
- /* Flow Context DB is out of resource */
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB UINT32_C(0x7)
- #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_LAST \
- HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB
- uint8_t unused_0[7];
-} __attribute__((packed));
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Unique session identifier for the session that the
+ * unregister request want to close a session client on.
+ */
+ uint32_t fw_session_id;
+ /*
+ * Unique session client identifier for the session that the
+ * unregister request want to close.
+ */
+ uint32_t fw_session_client_id;
+} __rte_packed;
+
+/* hwrm_tf_session_unregister_output (size:128b/16B) */
+struct hwrm_tf_session_unregister_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* unused. */
+ uint8_t unused0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
-/**********************
- * hwrm_cfa_flow_free *
- **********************/
+/*************************
+ * hwrm_tf_session_close *
+ *************************/
-/* hwrm_cfa_flow_free_input (size:256b/32B) */
-struct hwrm_cfa_flow_free_input {
+/* hwrm_tf_session_close_input (size:192b/24B) */
+struct hwrm_tf_session_close_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Flow record index. */
- uint16_t flow_handle;
- uint16_t unused_0;
- /* Flow counter id to be freed. */
- uint32_t flow_counter_id;
- /* This value identifies a set of CFA data structures used for a flow. */
- uint64_t ext_flow_handle;
-} __attribute__((packed));
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* unused. */
+ uint8_t unused0[4];
+} __rte_packed;
-/* hwrm_cfa_flow_free_output (size:256b/32B) */
-struct hwrm_cfa_flow_free_output {
+/* hwrm_tf_session_close_output (size:128b/16B) */
+struct hwrm_tf_session_close_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* packet is 64 b */
- uint64_t packet;
- /* byte is 64 b */
- uint64_t byte;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_action_data (size:960b/120B) */
-struct hwrm_cfa_flow_action_data {
- uint16_t action_flags;
- /* Setting of this flag indicates accept action. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FWD \
- UINT32_C(0x1)
- /* Setting of this flag indicates recycle action. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_RECYCLE \
- UINT32_C(0x2)
- /* Setting of this flag indicates drop action. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DROP \
- UINT32_C(0x4)
- /* Setting of this flag indicates meter action. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_METER \
- UINT32_C(0x8)
- /* Setting of this flag indicates tunnel action. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL \
- UINT32_C(0x10)
- /*
- * If set to 1 and flow direction is TX, it indicates decap of L2 header
- * and encap of tunnel header. If set to 1 and flow direction is RX, it
- * indicates decap of tunnel header and encap L2 header.
- */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL_IP \
- UINT32_C(0x20)
- /* Setting of this flag indicates ttl decrement action. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TTL_DECREMENT \
- UINT32_C(0x40)
- /* If set to 1, flow aging is enabled for this flow. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FLOW_AGING_ENABLED \
- UINT32_C(0x80)
- /* Setting of this flag indicates encap action.. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_ENCAP \
- UINT32_C(0x100)
- /* Setting of this flag indicates decap action.. */
- #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DECAP \
- UINT32_C(0x200)
- /* Meter id. */
- uint16_t act_meter_id;
- /* VNIC id. */
- uint16_t vnic_id;
- /* vport number. */
- uint16_t vport_id;
- /* The NAT source/destination. */
- uint16_t nat_port;
- uint16_t unused_0[3];
- /* NAT IPv4/IPv6 address. */
- uint32_t nat_ip_address[4];
- /* Encapsulation Type. */
- uint8_t encap_type;
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_NVGRE UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2GRE UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPIP UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_GENEVE UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_MPLS UINT32_C(0x6)
- /* VLAN */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VLAN UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_V4 UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE_V1 UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2_ETYPE UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 UINT32_C(0xc)
- #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_LAST \
- HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6
- uint8_t unused[7];
- /* This value is encap data for the associated encap type. */
- uint32_t encap_data[20];
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_tunnel_hdr_data (size:64b/8B) */
-struct hwrm_cfa_flow_tunnel_hdr_data {
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NONTUNNEL \
- UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPIP \
- UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_MPLS \
- UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_STT \
- UINT32_C(0x7)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE \
- UINT32_C(0x8)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- /* Any tunneled traffic */
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL \
- UINT32_C(0xff)
- #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_LAST \
- HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL
- uint8_t unused[3];
- /*
- * Tunnel identifier.
- * Virtual Network Identifier (VNI).
- */
- uint32_t tunnel_id;
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_l4_key_data (size:64b/8B) */
-struct hwrm_cfa_flow_l4_key_data {
- /* The value of source port. */
- uint16_t l4_src_port;
- /* The value of destination port. */
- uint16_t l4_dst_port;
- uint32_t unused;
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_l3_key_data (size:512b/64B) */
-struct hwrm_cfa_flow_l3_key_data {
- /* The value of ip protocol. */
- uint8_t ip_protocol;
- uint8_t unused_0[7];
- /* The value of destination IPv4/IPv6 address. */
- uint32_t ip_dst[4];
- /* The source IPv4/IPv6 address. */
- uint32_t ip_src[4];
- /* NAT IPv4/IPv6 address. */
- uint32_t nat_ip_address[4];
- uint32_t unused[2];
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_l2_key_data (size:448b/56B) */
-struct hwrm_cfa_flow_l2_key_data {
- /* Destination MAC address. */
- uint16_t dmac[3];
- uint16_t unused_0;
- /* Source MAC address. */
- uint16_t smac[3];
- uint16_t unused_1;
- /* L2 header re-write Destination MAC address. */
- uint16_t l2_rewrite_dmac[3];
- uint16_t unused_2;
- /* L2 header re-write Source MAC address. */
- uint16_t l2_rewrite_smac[3];
- /* Ethertype. */
- uint16_t ethertype;
- /* Number of VLAN tags. */
- uint16_t num_vlan_tags;
- /* VLAN tpid. */
- uint16_t l2_rewrite_vlan_tpid;
- /* VLAN tci. */
- uint16_t l2_rewrite_vlan_tci;
- uint8_t unused_3[2];
- /* Outer VLAN TPID. */
- uint16_t ovlan_tpid;
- /* Outer VLAN TCI. */
- uint16_t ovlan_tci;
- /* Inner VLAN TPID. */
- uint16_t ivlan_tpid;
- /* Inner VLAN TCI. */
- uint16_t ivlan_tci;
- uint8_t unused[8];
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_key_data (size:4160b/520B) */
-struct hwrm_cfa_flow_key_data {
- /* Flow associated tunnel L2 header key info. */
- uint32_t t_l2_key_data[14];
- /* Flow associated tunnel L2 header mask info. */
- uint32_t t_l2_key_mask[14];
- /* Flow associated tunnel L3 header key info. */
- uint32_t t_l3_key_data[16];
- /* Flow associated tunnel L3 header mask info. */
- uint32_t t_l3_key_mask[16];
- /* Flow associated tunnel L4 header key info. */
- uint32_t t_l4_key_data[2];
- /* Flow associated tunnel L4 header mask info. */
- uint32_t t_l4_key_mask[2];
- /* Flow associated tunnel header info. */
- uint32_t tunnel_hdr[2];
- /* Flow associated L2 header key info. */
- uint32_t l2_key_data[14];
- /* Flow associated L2 header mask info. */
- uint32_t l2_key_mask[14];
- /* Flow associated L3 header key info. */
- uint32_t l3_key_data[16];
- /* Flow associated L3 header mask info. */
- uint32_t l3_key_mask[16];
- /* Flow associated L4 header key info. */
- uint32_t l4_key_data[2];
- /* Flow associated L4 header mask info. */
- uint32_t l4_key_mask[2];
-} __attribute__((packed));
+} __rte_packed;
-/**********************
- * hwrm_cfa_flow_info *
- **********************/
+/************************
+ * hwrm_tf_session_qcfg *
+ ************************/
-/* hwrm_cfa_flow_info_input (size:256b/32B) */
-struct hwrm_cfa_flow_info_input {
+/* hwrm_tf_session_qcfg_input (size:192b/24B) */
+struct hwrm_tf_session_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Flow record index. */
- uint16_t flow_handle;
- /* Max flow handle */
- #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_MASK \
- UINT32_C(0xfff)
- #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_SFT 0
- /* CNP flow handle */
- #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_CNP_CNT \
- UINT32_C(0x1000)
- /* RoCEv1 flow handle */
- #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_ROCEV1_CNT \
- UINT32_C(0x2000)
- /* RoCEv2 flow handle */
- #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_ROCEV2_CNT \
- UINT32_C(0x4000)
- /* Direction rx = 1 */
- #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_DIR_RX \
- UINT32_C(0x8000)
- uint8_t unused_0[6];
- /* This value identifies a set of CFA data structures used for a flow. */
- uint64_t ext_flow_handle;
-} __attribute__((packed));
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* unused. */
+ uint8_t unused0[4];
+} __rte_packed;
-/* hwrm_cfa_flow_info_output (size:5632b/704B) */
-struct hwrm_cfa_flow_info_output {
+/* hwrm_tf_session_qcfg_output (size:128b/16B) */
+struct hwrm_tf_session_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t flags;
- /* When set to 1, indicates the configuration is the TX flow. */
- #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1)
- /* When set to 1, indicates the configuration is the RX flow. */
- #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2)
- /* profile is 8 b */
- uint8_t profile;
- /* src_fid is 16 b */
- uint16_t src_fid;
- /* dst_fid is 16 b */
- uint16_t dst_fid;
- /* l2_ctxt_id is 16 b */
- uint16_t l2_ctxt_id;
- /* em_info is 64 b */
- uint64_t em_info;
- /* tcam_info is 64 b */
- uint64_t tcam_info;
- /* vfp_tcam_info is 64 b */
- uint64_t vfp_tcam_info;
- /* ar_id is 16 b */
- uint16_t ar_id;
- /* flow_handle is 16 b */
- uint16_t flow_handle;
- /* tunnel_handle is 32 b */
- uint32_t tunnel_handle;
- /* The flow aging timer for the flow, the unit is 100 milliseconds */
- uint16_t flow_timer;
- uint8_t unused_0[6];
- /* Flow associated L2, L3 and L4 headers info. */
- uint32_t flow_key_data[130];
- /* Flow associated action record info. */
- uint32_t flow_action_info[30];
- uint8_t unused_1[7];
+ /* RX action control settings flags. */
+ uint8_t rx_act_flags;
+ /*
+ * A value of 1 in this field indicates that Global Flow ID
+ * reporting into cfa_code and cfa_metadata is enabled.
+ */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_GFID_EN \
+ UINT32_C(0x1)
+ /*
+ * A value of 1 in this field indicates that both inner and outer
+ * are stripped and inner tag is passed.
+ * Enabled.
+ */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_VTAG_DLT_BOTH \
+ UINT32_C(0x2)
+ /*
+ * A value of 1 in this field indicates that the re-use of
+ * existing tunnel L2 header SMAC is enabled for
+ * Non-tunnel L2, L2-L3 and IP-IP tunnel.
+ */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_TECT_SMAC_OVR_RUTNSL2 \
+ UINT32_C(0x4)
+ /* TX Action control settings flags. */
+ uint8_t tx_act_flags;
+ /* Disabled. */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_ABCR_VEB_EN \
+ UINT32_C(0x1)
+ /*
+ * When set to 1 any GRE tunnels will include the
+ * optional Key field.
+ */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_GRE_SET_K \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, for GRE tunnels, the IPV6 Traffic Class (TC)
+ * field of the outer header is inherited from the inner header
+ * (if present) or the fixed value as taken from the encap
+ * record.
+ */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV6_TC_IH \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, for GRE tunnels, the IPV4 Type Of Service (TOS)
+ * field of the outer header is inherited from the inner header
+ * (if present) or the fixed value as taken from the encap record.
+ */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV4_TOS_IH \
+ UINT32_C(0x8)
+ /* unused. */
+ uint8_t unused0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***********************
- * hwrm_cfa_flow_flush *
- ***********************/
+/******************************
+ * hwrm_tf_session_resc_qcaps *
+ ******************************/
-/* hwrm_cfa_flow_flush_input (size:256b/32B) */
-struct hwrm_cfa_flow_flush_input {
+/* hwrm_tf_session_resc_qcaps_input (size:256b/32B) */
+struct hwrm_tf_session_resc_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* flags is 32 b */
- uint32_t flags;
- /*
- * Set to 1 to indicate the page size, page layers, and flow_handle_table_dma_addr
- * fields are valid. The flow flush operation should only flush the flows from the
- * flow table specified. This flag is set to 0 by older driver. For older firmware,
- * setting this flag has no effect.
- */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_TABLE_VALID \
- UINT32_C(0x1)
- /*
- * Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA
- * context memory tables..etc. This flag is set to 0 by older driver. For older firmware,
- * setting this flag has no effect.
- */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \
- UINT32_C(0x2)
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX
/*
- * Set to 1 to indicate flow flush operation to cleanup all the flows by the caller.
- * This flag is set to 0 by older driver. For older firmware, setting this flag has no effect.
+ * Defines the size of the provided qcaps_addr array
+ * buffer. The size should be set to the Resource Manager
+ * provided max number of qcaps entries which is device
+ * specific. Resource Manager gets the max size from HCAPI
+ * RM.
*/
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_PORT \
- UINT32_C(0x4)
- /* Set to 1 to indicate the flow counter IDs are included in the flow table. */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_INCL_FC \
- UINT32_C(0x8000000)
+ uint16_t qcaps_size;
/*
- * This specifies the size of flow handle entries provided by the driver
- * in the flow table specified below. Only two flow handle size enums are defined.
+ * This is the DMA address for the qcaps output data array
+ * buffer. Array is of tf_rm_resc_req_entry type and is
+ * device specific.
*/
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_MASK \
- UINT32_C(0xc0000000)
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_SFT \
- 30
- /* The flow handle is 16bit */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_16BIT \
- (UINT32_C(0x0) << 30)
- /* The flow handle is 64bit */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT \
- (UINT32_C(0x1) << 30)
- #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_LAST \
- HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT
- /* Specify page size of the flow table memory. */
- uint8_t page_size;
- /* The page size is 4K */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
- /* The page size is 8K */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
- /* The page size is 64K */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
- /* The page size is 256K */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
- /* The page size is 1M */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
- /* The page size is 2M */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
- /* The page size is 4M */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
- /* The page size is 1G */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_LAST \
- HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G
- /* FLow table memory indirect levels. */
- uint8_t page_level;
- /* PBL pointer is physical start address. */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
- /* PBL pointer points to PTE table. */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
- #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LAST \
- HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2
- /* number of flows in the flow table */
- uint16_t num_flows;
- /* Pointer to the PBL, or PDL depending on number of levels */
- uint64_t page_dir;
-} __attribute__((packed));
+ uint64_t qcaps_addr;
+} __rte_packed;
-/* hwrm_cfa_flow_flush_output (size:128b/16B) */
-struct hwrm_cfa_flow_flush_output {
+/* hwrm_tf_session_resc_qcaps_output (size:192b/24B) */
+struct hwrm_tf_session_resc_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* Control flags. */
+ uint32_t flags;
+ /* Session reservation strategy. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_MASK \
+ UINT32_C(0x3)
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_SFT \
+ 0
+ /* Static partitioning. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_STATIC \
+ UINT32_C(0x0)
+ /* Strategy 1. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_1 \
+ UINT32_C(0x1)
+ /* Strategy 2. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_2 \
+ UINT32_C(0x2)
+ /* Strategy 3. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3 \
+ UINT32_C(0x3)
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_LAST \
+ HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3
+ /*
+ * Size of the returned qcaps_addr data array buffer. The
+ * value cannot exceed the size defined by the input msg,
+ * qcaps_size.
+ */
+ uint16_t size;
+ /* unused. */
+ uint16_t unused0;
+ /* unused. */
+ uint8_t unused1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***********************
- * hwrm_cfa_flow_stats *
- ***********************/
+/******************************
+ * hwrm_tf_session_resc_alloc *
+ ******************************/
-/* hwrm_cfa_flow_stats_input (size:640b/80B) */
-struct hwrm_cfa_flow_stats_input {
+/* hwrm_tf_session_resc_alloc_input (size:320b/40B) */
+struct hwrm_tf_session_resc_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
/*
* The sequence ID is used by the driver for tracking multiple
* commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
- */
- uint16_t seq_id;
- /*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
- * * 0xFFFD - Reserved for user-space HWRM interface
- * * 0xFFFF - HWRM
- */
- uint16_t target_id;
- /*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
- */
- uint64_t resp_addr;
- /* Flow handle. */
- uint16_t num_flows;
- /* Flow handle. */
- uint16_t flow_handle_0;
- /* Flow handle. */
- uint16_t flow_handle_1;
- /* Flow handle. */
- uint16_t flow_handle_2;
- /* Flow handle. */
- uint16_t flow_handle_3;
- /* Flow handle. */
- uint16_t flow_handle_4;
- /* Flow handle. */
- uint16_t flow_handle_5;
- /* Flow handle. */
- uint16_t flow_handle_6;
- /* Flow handle. */
- uint16_t flow_handle_7;
- /* Flow handle. */
- uint16_t flow_handle_8;
- /* Flow handle. */
- uint16_t flow_handle_9;
- uint8_t unused_0[2];
- /* Flow ID of a flow. */
- uint32_t flow_id_0;
- /* Flow ID of a flow. */
- uint32_t flow_id_1;
- /* Flow ID of a flow. */
- uint32_t flow_id_2;
- /* Flow ID of a flow. */
- uint32_t flow_id_3;
- /* Flow ID of a flow. */
- uint32_t flow_id_4;
- /* Flow ID of a flow. */
- uint32_t flow_id_5;
- /* Flow ID of a flow. */
- uint32_t flow_id_6;
- /* Flow ID of a flow. */
- uint32_t flow_id_7;
- /* Flow ID of a flow. */
- uint32_t flow_id_8;
- /* Flow ID of a flow. */
- uint32_t flow_id_9;
-} __attribute__((packed));
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX
+ /*
+ * Defines the array size of the provided req_addr and
+ * resv_addr array buffers. Should be set to the number of
+ * request entries.
+ */
+ uint16_t req_size;
+ /*
+ * This is the DMA address for the request input data array
+ * buffer. Array is of tf_rm_resc_req_entry type. Size of the
+ * array buffer is provided by the 'req_size' field in this
+ * message.
+ */
+ uint64_t req_addr;
+ /*
+ * This is the DMA address for the resc output data array
+ * buffer. Array is of tf_rm_resc_entry type. Size of the array
+ * buffer is provided by the 'req_size' field in this
+ * message.
+ */
+ uint64_t resc_addr;
+} __rte_packed;
-/* hwrm_cfa_flow_stats_output (size:1408b/176B) */
-struct hwrm_cfa_flow_stats_output {
+/* hwrm_tf_session_resc_alloc_output (size:128b/16B) */
+struct hwrm_tf_session_resc_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* packet_0 is 64 b */
- uint64_t packet_0;
- /* packet_1 is 64 b */
- uint64_t packet_1;
- /* packet_2 is 64 b */
- uint64_t packet_2;
- /* packet_3 is 64 b */
- uint64_t packet_3;
- /* packet_4 is 64 b */
- uint64_t packet_4;
- /* packet_5 is 64 b */
- uint64_t packet_5;
- /* packet_6 is 64 b */
- uint64_t packet_6;
- /* packet_7 is 64 b */
- uint64_t packet_7;
- /* packet_8 is 64 b */
- uint64_t packet_8;
- /* packet_9 is 64 b */
- uint64_t packet_9;
- /* byte_0 is 64 b */
- uint64_t byte_0;
- /* byte_1 is 64 b */
- uint64_t byte_1;
- /* byte_2 is 64 b */
- uint64_t byte_2;
- /* byte_3 is 64 b */
- uint64_t byte_3;
- /* byte_4 is 64 b */
- uint64_t byte_4;
- /* byte_5 is 64 b */
- uint64_t byte_5;
- /* byte_6 is 64 b */
- uint64_t byte_6;
- /* byte_7 is 64 b */
- uint64_t byte_7;
- /* byte_8 is 64 b */
- uint64_t byte_8;
- /* byte_9 is 64 b */
- uint64_t byte_9;
- uint8_t unused_0[7];
+ /*
+ * Size of the returned tf_rm_resc_entry data array. The value
+ * cannot exceed the req_size defined by the input msg. The data
+ * array is returned using the resv_addr specified DMA
+ * address also provided by the input msg.
+ */
+ uint16_t size;
+ /* unused. */
+ uint8_t unused0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***********************************
- * hwrm_cfa_flow_aging_timer_reset *
- ***********************************/
+/*****************************
+ * hwrm_tf_session_resc_free *
+ *****************************/
-/* hwrm_cfa_flow_aging_timer_reset_input (size:256b/32B) */
-struct hwrm_cfa_flow_aging_timer_reset_input {
+/* hwrm_tf_session_resc_free_input (size:256b/32B) */
+struct hwrm_tf_session_resc_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Flow record index. */
- uint16_t flow_handle;
- uint8_t unused_0[2];
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX
/*
- * New flow timer value for the flow specified in the ext_flow_handle.
- * The flow timer unit is 100ms.
+ * Defines the size, in bytes, of the provided free_addr
+ * buffer.
*/
- uint32_t flow_timer;
- /* This value identifies a set of CFA data structures used for a flow. */
- uint64_t ext_flow_handle;
-} __attribute__((packed));
+ uint16_t free_size;
+ /*
+ * This is the DMA address for the free input data array
+ * buffer. Array is of tf_rm_resc_entry type. Size of the
+ * buffer is provided by the 'free_size' field of this
+ * message.
+ */
+ uint64_t free_addr;
+} __rte_packed;
-/* hwrm_cfa_flow_aging_timer_reset_output (size:128b/16B) */
-struct hwrm_cfa_flow_aging_timer_reset_output {
+/* hwrm_tf_session_resc_free_output (size:128b/16B) */
+struct hwrm_tf_session_resc_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***************************
- * hwrm_cfa_flow_aging_cfg *
- ***************************/
+/******************************
+ * hwrm_tf_session_resc_flush *
+ ******************************/
-/* hwrm_cfa_flow_aging_cfg_input (size:384b/48B) */
-struct hwrm_cfa_flow_aging_cfg_input {
+/* hwrm_tf_session_resc_flush_input (size:256b/32B) */
+struct hwrm_tf_session_resc_flush_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The bit field to enable per flow aging configuration. */
- uint16_t enables;
- /* This bit must be '1' for the tcp flow timer field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FLOW_TIMER \
- UINT32_C(0x1)
- /* This bit must be '1' for the tcp finish timer field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FIN_TIMER \
- UINT32_C(0x2)
- /* This bit must be '1' for the udp flow timer field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_UDP_FLOW_TIMER \
- UINT32_C(0x4)
- /* This bit must be '1' for the eem dma interval field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_DMA_INTERVAL \
- UINT32_C(0x8)
- /* This bit must be '1' for the eem notice interval field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_NOTICE_INTERVAL \
- UINT32_C(0x10)
- /* This bit must be '1' for the eem context memory maximum entries field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MAX_ENTRIES \
- UINT32_C(0x20)
- /* This bit must be '1' for the eem context memory ID field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_ID \
- UINT32_C(0x40)
- /* This bit must be '1' for the eem context memory type field to be configured */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MEM_TYPE \
- UINT32_C(0x80)
- uint8_t flags;
- /* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX
- /* Enumeration denoting the enable, disable eem flow aging configuration. */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM UINT32_C(0x2)
- /* tx path */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_DISABLE \
- (UINT32_C(0x0) << 1)
- /* rx path */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE \
- (UINT32_C(0x1) << 1)
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_LAST \
- HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE
- uint8_t unused_0;
- /* The flow aging timer for all TCP flows, the unit is 100 milliseconds. */
- uint32_t tcp_flow_timer;
- /* The TCP finished timer for all TCP flows, the unit is 100 milliseconds. */
- uint32_t tcp_fin_timer;
- /* The flow aging timer for all UDP flows, the unit is 100 milliseconds. */
- uint32_t udp_flow_timer;
- /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
- uint16_t eem_dma_interval;
- /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
- uint16_t eem_notice_interval;
- /* The maximum entries number in the eem context memory. */
- uint32_t eem_ctx_max_entries;
- /* The context memory ID for eem flow aging. */
- uint16_t eem_ctx_id;
- uint16_t eem_ctx_mem_type;
- /* The content of context memory is eem ejection data, the size of each entry is 4 bytes. */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA \
- UINT32_C(0x0)
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_LAST \
- HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA
- uint8_t unused_1[4];
-} __attribute__((packed));
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX
+ /*
+ * Defines the size, in bytes, of the provided flush_addr
+ * buffer.
+ */
+ uint16_t flush_size;
+ /*
+ * This is the DMA address for the flush input data array
+ * buffer. Array of tf_rm_resc_entry type. Size of the
+ * buffer is provided by the 'flush_size' field in this
+ * message.
+ */
+ uint64_t flush_addr;
+} __rte_packed;
-/* hwrm_cfa_flow_aging_cfg_output (size:128b/16B) */
-struct hwrm_cfa_flow_aging_cfg_output {
+/* hwrm_tf_session_resc_flush_output (size:128b/16B) */
+struct hwrm_tf_session_resc_flush_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
+
+/* TruFlow RM capability of a resource. */
+/* tf_rm_resc_req_entry (size:64b/8B) */
+struct tf_rm_resc_req_entry {
+ /* Type of the resource, defined globally in HCAPI RM. */
+ uint32_t type;
+ /* Minimum value. */
+ uint16_t min;
+ /* Maximum value. */
+ uint16_t max;
+} __rte_packed;
+
+/* TruFlow RM reservation information. */
+/* tf_rm_resc_entry (size:64b/8B) */
+struct tf_rm_resc_entry {
+ /* Type of the resource, defined globally in HCAPI RM. */
+ uint32_t type;
+ /* Start offset. */
+ uint16_t start;
+ /* Number of resources. */
+ uint16_t stride;
+} __rte_packed;
-/****************************
- * hwrm_cfa_flow_aging_qcfg *
- ****************************/
+/************************
+ * hwrm_tf_tbl_type_get *
+ ************************/
-/* hwrm_cfa_flow_aging_qcfg_input (size:192b/24B) */
-struct hwrm_cfa_flow_aging_qcfg_input {
+/* hwrm_tf_tbl_type_get_input (size:256b/32B) */
+struct hwrm_tf_tbl_type_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */
- uint8_t flags;
- /* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_RX
- uint8_t unused_0[7];
-} __attribute__((packed));
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint8_t unused0[2];
+ /*
+ * Type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Index of the type to retrieve. */
+ uint32_t index;
+} __rte_packed;
-/* hwrm_cfa_flow_aging_qcfg_output (size:320b/40B) */
-struct hwrm_cfa_flow_aging_qcfg_output {
+/* hwrm_tf_tbl_type_get_output (size:1216b/152B) */
+struct hwrm_tf_tbl_type_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The current flow aging timer for all TCP flows, the unit is 100 millisecond. */
- uint32_t tcp_flow_timer;
- /* The current TCP finished timer for all TCP flows, the unit is 100 millisecond. */
- uint32_t tcp_fin_timer;
- /* The current flow aging timer for all UDP flows, the unit is 100 millisecond. */
- uint32_t udp_flow_timer;
- /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
- uint16_t eem_dma_interval;
- /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
- uint16_t eem_notice_interval;
- /* The maximum entries number in the eem context memory. */
- uint32_t eem_ctx_max_entries;
- /* The context memory ID for eem flow aging. */
- uint16_t eem_ctx_id;
- /* The context memory type for eem flow aging. */
- uint16_t eem_ctx_mem_type;
- uint8_t unused_0[7];
+ /* Response code. */
+ uint32_t resp_code;
+ /* Response size. */
+ uint16_t size;
+ /* unused */
+ uint16_t unused0;
+ /* Response data. */
+ uint8_t data[128];
+ /* unused */
+ uint8_t unused1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*****************************
- * hwrm_cfa_flow_aging_qcaps *
- *****************************/
+/************************
+ * hwrm_tf_tbl_type_set *
+ ************************/
-/* hwrm_cfa_flow_aging_qcaps_input (size:192b/24B) */
-struct hwrm_cfa_flow_aging_qcaps_input {
+/* hwrm_tf_tbl_type_set_input (size:1024b/128B) */
+struct hwrm_tf_tbl_type_set_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */
- uint8_t flags;
- /* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_RX
- uint8_t unused_0[7];
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_aging_qcaps_output (size:256b/32B) */
-struct hwrm_cfa_flow_aging_qcaps_output {
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint8_t unused0[2];
+ /*
+ * Type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Index of the type to retrieve. */
+ uint32_t index;
+ /* Size of the data to set. */
+ uint16_t size;
+ /* unused */
+ uint8_t unused1[6];
+ /* Data to be set. */
+ uint8_t data[88];
+} __rte_packed;
+
+/* hwrm_tf_tbl_type_set_output (size:128b/16B) */
+struct hwrm_tf_tbl_type_set_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The maximum flow aging timer for all TCP flows, the unit is 100 millisecond. */
- uint32_t max_tcp_flow_timer;
- /* The maximum TCP finished timer for all TCP flows, the unit is 100 millisecond. */
- uint32_t max_tcp_fin_timer;
- /* The maximum flow aging timer for all UDP flows, the unit is 100 millisecond. */
- uint32_t max_udp_flow_timer;
- /* The maximum aging flows that HW can support. */
- uint32_t max_aging_flows;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**********************************
- * hwrm_cfa_tcp_flag_process_qcfg *
- **********************************/
+/*************************
+ * hwrm_tf_ctxt_mem_rgtr *
+ *************************/
-/* hwrm_cfa_tcp_flag_process_qcfg_input (size:128b/16B) */
-struct hwrm_cfa_tcp_flag_process_qcfg_input {
+/* hwrm_tf_ctxt_mem_rgtr_input (size:256b/32B) */
+struct hwrm_tf_ctxt_mem_rgtr_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+ /* Control flags. */
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing
+ * to PTE tables.
+ */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
+ HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
+ HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G
+ /* unused. */
+ uint32_t unused0;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+} __rte_packed;
-/* hwrm_cfa_tcp_flag_process_qcfg_output (size:192b/24B) */
-struct hwrm_cfa_tcp_flag_process_qcfg_output {
+/* hwrm_tf_ctxt_mem_rgtr_output (size:128b/16B) */
+struct hwrm_tf_ctxt_mem_rgtr_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The port 0 RX mirror action record ID. */
- uint16_t rx_ar_id_port0;
- /* The port 1 RX mirror action record ID. */
- uint16_t rx_ar_id_port1;
- /* The port 0 RX action record ID for TX TCP flag packets from loopback path. */
- uint16_t tx_ar_id_port0;
- /* The port 1 RX action record ID for TX TCP flag packets from loopback path. */
- uint16_t tx_ar_id_port1;
- uint8_t unused_0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * Id/Handle to the recently register context memory. This
+ * handle is passed to the TF session.
+ */
+ uint16_t ctx_id;
+ /* unused. */
+ uint8_t unused0[5];
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**********************
- * hwrm_cfa_pair_info *
- **********************/
+/***************************
+ * hwrm_tf_ctxt_mem_unrgtr *
+ ***************************/
-/* hwrm_cfa_pair_info_input (size:448b/56B) */
-struct hwrm_cfa_pair_info_input {
+/* hwrm_tf_ctxt_mem_unrgtr_input (size:192b/24B) */
+struct hwrm_tf_ctxt_mem_unrgtr_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* If this flag is set, lookup by name else lookup by index. */
- #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
- /* If this flag is set, lookup by PF id and VF id. */
- #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2)
- /* Pair table index. */
- uint16_t pair_index;
- /* Pair pf index. */
- uint8_t pair_pfid;
- /* Pair vf index. */
- uint8_t pair_vfid;
- /* Pair name (32 byte string). */
- char pair_name[32];
-} __attribute__((packed));
+ /*
+ * Id/Handle to the recently register context memory. This
+ * handle is passed to the TF session.
+ */
+ uint16_t ctx_id;
+ /* unused. */
+ uint8_t unused0[6];
+} __rte_packed;
-/* hwrm_cfa_pair_info_output (size:576b/72B) */
-struct hwrm_cfa_pair_info_output {
+/* hwrm_tf_ctxt_mem_unrgtr_output (size:128b/16B) */
+struct hwrm_tf_ctxt_mem_unrgtr_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Pair table index. */
- uint16_t next_pair_index;
- /* Pair member a's fid. */
- uint16_t a_fid;
- /* Logical host number. */
- uint8_t host_a_index;
- /* Logical PF number. */
- uint8_t pf_a_index;
- /* Pair member a's Linux logical VF number. */
- uint16_t vf_a_index;
- /* Rx CFA code. */
- uint16_t rx_cfa_code_a;
- /* Tx CFA action. */
- uint16_t tx_cfa_action_a;
- /* Pair member b's fid. */
- uint16_t b_fid;
- /* Logical host number. */
- uint8_t host_b_index;
- /* Logical PF number. */
- uint8_t pf_b_index;
- /* Pair member a's Linux logical VF number. */
- uint16_t vf_b_index;
- /* Rx CFA code. */
- uint16_t rx_cfa_code_b;
- /* Tx CFA action. */
- uint16_t tx_cfa_action_b;
- /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */
- uint8_t pair_mode;
- /* Pair between VF on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
- /* Pair between REP on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
- /* Pair between REP on local host with REP on specified host. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
- /* Pair for the proxy interface. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3)
- /* Pair for the PF interface. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \
- HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR
- /* Pair state. */
- uint8_t pair_state;
- /* Pair has been allocated */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
- /* Both pair members are active */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
- HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
- /* Pair name (32 byte string). */
- char pair_name[32];
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***************************************
- * hwrm_cfa_redirect_query_tunnel_type *
- ***************************************/
+/************************
+ * hwrm_tf_ext_em_qcaps *
+ ************************/
-/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */
-struct hwrm_cfa_redirect_query_tunnel_type_input {
+/* hwrm_tf_ext_em_qcaps_input (size:192b/24B) */
+struct hwrm_tf_ext_em_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The source function id. */
- uint16_t src_fid;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR \
+ UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_RX \
+ UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX \
+ UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX
+ /* When set to 1, all offloaded flows will be sent to EXT EM. */
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x2)
+ /* unused. */
+ uint32_t unused0;
+} __rte_packed;
-/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */
-struct hwrm_cfa_redirect_query_tunnel_type_output {
+/* hwrm_tf_ext_em_qcaps_output (size:320b/40B) */
+struct hwrm_tf_ext_em_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Tunnel Mask. */
- uint32_t tunnel_mask;
- /* Non-tunnel */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the the FW supports the Centralized
+ * Memory Model. The concept designates one entity for the
+ * memory allocation while all others ‘subscribe’ to it.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
UINT32_C(0x1)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \
+ /*
+ * When set to 1, indicates the the FW supports the Detached
+ * Centralized Memory Model. The memory is allocated and managed
+ * as a separate entity. All PFs and VFs will be granted direct
+ * or semi-direct access to the allocated memory while none of
+ * which can interfere with the management of the memory.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
UINT32_C(0x2)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \
+ /* unused. */
+ uint32_t unused0;
+ /* Support flags. */
+ uint32_t supported;
+ /*
+ * If set to 1, then EXT EM KEY0 table is supported using
+ * crc32 hash.
+ * If set to 0, EXT EM KEY0 table is not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then EXT EM KEY1 table is supported using
+ * lookup3 hash.
+ * If set to 0, EXT EM KEY1 table is not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then EXT EM External Record table is supported.
+ * If set to 0, EXT EM External Record table is not
+ * supported. (This table includes action record, EFC
+ * pointers, encap pointers)
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
UINT32_C(0x4)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \
+ /*
+ * If set to 1, then EXT EM External Flow Counters table is
+ * supported.
+ * If set to 0, EXT EM External Flow Counters table is not
+ * supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
UINT32_C(0x8)
- /* IP in IP */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \
- UINT32_C(0x10)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \
- UINT32_C(0x20)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \
- UINT32_C(0x40)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \
- UINT32_C(0x80)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \
- UINT32_C(0x100)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \
- UINT32_C(0x200)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \
- UINT32_C(0x400)
- /* Any tunneled traffic */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \
- UINT32_C(0x800)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \
- UINT32_C(0x1000)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \
- UINT32_C(0x2000)
- uint8_t unused_0[3];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * If set to 1, then FID table used for implicit flow flush
+ * is supported.
+ * If set to 0, then FID table used for implicit flow flush
+ * is not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
+ UINT32_C(0x10)
+ /*
+ * The maximum number of entries supported by EXT EM. When
+ * configuring the host memory the number of numbers of
+ * entries that can supported are -
+ * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M,
+ * 128M entries.
+ * Any value that are not these values, the FW will round
+ * down to the closest support number of entries.
+ */
+ uint32_t max_entries_supported;
+ /*
+ * The entry size in bytes of each entry in the EXT EM
+ * KEY0/KEY1 tables.
+ */
+ uint16_t key_entry_size;
+ /*
+ * The entry size in bytes of each entry in the EXT EM RECORD
+ * tables.
+ */
+ uint16_t record_entry_size;
+ /* The entry size in bytes of each entry in the EXT EM EFC tables. */
+ uint16_t efc_entry_size;
+ /* The FID size in bytes of each entry in the EXT EM FID tables. */
+ uint16_t fid_entry_size;
+ /* unused. */
+ uint8_t unused1[7];
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*************************
- * hwrm_cfa_ctx_mem_rgtr *
- *************************/
+/*********************
+ * hwrm_tf_ext_em_op *
+ *********************/
-/* hwrm_cfa_ctx_mem_rgtr_input (size:256b/32B) */
-struct hwrm_cfa_ctx_mem_rgtr_input {
+/* hwrm_tf_ext_em_op_input (size:192b/24B) */
+struct hwrm_tf_ext_em_op_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Control flags. */
uint16_t flags;
- /* Counter PBL indirect levels. */
- uint8_t page_level;
- /* PBL pointer is physical start address. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
- /* PBL pointer points to PTE table. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
- HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
- /* Page size. */
- uint8_t page_size;
- /* 4KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
- /* 8KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
- /* 64KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
- /* 256KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
- /* 1MB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
- /* 2MB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
- /* 4MB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
- /* 1GB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
- HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G
- uint32_t unused_0;
- /* Pointer to the PBL, or PDL depending on number of levels */
- uint64_t page_dir;
-} __attribute__((packed));
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint16_t unused0;
+ /* The number of EXT EM key table entries to be configured. */
+ uint16_t op;
+ /* This value is reserved and should not be used. */
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
+ /*
+ * To properly stop EXT EM and ensure there are no DMA's,
+ * the caller must disable EXT EM for the given PF, using
+ * this call. This will safely disable EXT EM and ensure
+ * that all DMA'ed to the keys/records/efc have been
+ * completed.
+ */
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_DISABLE UINT32_C(0x1)
+ /*
+ * Once the EXT EM host memory has been configured, EXT EM
+ * options have been configured. Then the caller should
+ * enable EXT EM for the given PF. Note once this call has
+ * been made, then the EXT EM mechanism will be active and
+ * DMA's will occur as packets are processed.
+ */
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_ENABLE UINT32_C(0x2)
+ /*
+ * Clear EXT EM settings for the given PF so that the
+ * register values are reset back to their initial state.
+ */
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP UINT32_C(0x3)
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_LAST \
+ HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP
+ /* unused. */
+ uint16_t unused1;
+} __rte_packed;
-/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_rgtr_output {
+/* hwrm_tf_ext_em_op_output (size:128b/16B) */
+struct hwrm_tf_ext_em_op_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* unused. */
+ uint8_t unused0[7];
/*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
- */
- uint16_t ctx_id;
- uint8_t unused_0[5];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/***************************
- * hwrm_cfa_ctx_mem_unrgtr *
- ***************************/
+/**********************
+ * hwrm_tf_ext_em_cfg *
+ **********************/
-/* hwrm_cfa_ctx_mem_unrgtr_input (size:192b/24B) */
-struct hwrm_cfa_ctx_mem_unrgtr_input {
+/* hwrm_tf_ext_em_cfg_input (size:384b/48B) */
+struct hwrm_tf_ext_em_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR \
+ UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_RX \
+ UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX \
+ UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX
+ /* When set to 1, all offloaded flows will be sent to EXT EM. */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x2)
+ /* When set to 1, secondary, 0 means primary. */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_SECONDARY_PF \
+ UINT32_C(0x4)
/*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
+ * Group_id which used by Firmware to identify memory pools belonging
+ * to certain group.
*/
- uint16_t ctx_id;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ uint16_t group_id;
+ /*
+ * Dynamically reconfigure EEM pending cache every 1/10th of second.
+ * If set to 0 it will disable the EEM HW flush of the pending cache.
+ */
+ uint8_t flush_interval;
+ /* unused. */
+ uint8_t unused0;
+ /*
+ * Configured EXT EM with the given number of entries. All
+ * the EXT EM tables KEY0, KEY1, RECORD, EFC all have the
+ * same number of entries and all tables will be configured
+ * using this value. Current minimum value is 32k. Current
+ * maximum value is 128M.
+ */
+ uint32_t num_entries;
+ /* unused. */
+ uint32_t unused1;
+ /* Configured EXT EM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EXT EM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EXT EM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ /* unused. */
+ uint16_t unused2;
+ /* unused. */
+ uint32_t unused3;
+} __rte_packed;
-/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_unrgtr_output {
+/* hwrm_tf_ext_em_cfg_output (size:128b/16B) */
+struct hwrm_tf_ext_em_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*************************
- * hwrm_cfa_ctx_mem_qctx *
- *************************/
+/***********************
+ * hwrm_tf_ext_em_qcfg *
+ ***********************/
-/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */
-struct hwrm_cfa_ctx_mem_qctx_input {
+/* hwrm_tf_ext_em_qcfg_input (size:192b/24B) */
+struct hwrm_tf_ext_em_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
- */
- uint16_t ctx_id;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint32_t unused0;
+} __rte_packed;
-/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
-struct hwrm_cfa_ctx_mem_qctx_output {
+/* hwrm_tf_ext_em_qcfg_output (size:256b/32B) */
+struct hwrm_tf_ext_em_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint16_t flags;
- /* Counter PBL indirect levels. */
- uint8_t page_level;
- /* PBL pointer is physical start address. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
- /* PBL pointer points to PTE table. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \
- HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2
- /* Page size. */
- uint8_t page_size;
- /* 4KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
- /* 8KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
- /* 64KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
- /* 256KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
- /* 1MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
- /* 2MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
- /* 4MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
- /* 1GB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \
- HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G
- uint8_t unused_0[4];
- /* Pointer to the PBL, or PDL depending on number of levels */
- uint64_t page_dir;
- uint8_t unused_1[7];
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR \
+ UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_RX \
+ UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX \
+ UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX
+ /* When set to 1, all offloaded flows will be sent to EXT EM. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x2)
+ /* The number of entries the FW has configured for EXT EM. */
+ uint32_t num_entries;
+ /* Configured EXT EM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EXT EM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EXT EM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ /* unused. */
+ uint8_t unused0[5];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/**************************
- * hwrm_cfa_ctx_mem_qcaps *
- **************************/
+/*********************
+ * hwrm_tf_em_insert *
+ *********************/
-/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_qcaps_input {
+/* hwrm_tf_em_insert_input (size:832b/104B) */
+struct hwrm_tf_em_insert_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+ /* Firmware Session Id. */
+ uint32_t fw_session_id;
+ /* Control Flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX
+ /* Reported match strength. */
+ uint16_t strength;
+ /* Index to action. */
+ uint32_t action_ptr;
+ /* Index of EM record. */
+ uint32_t em_record_idx;
+ /* EM Key value. */
+ uint64_t em_key[8];
+ /* Number of bits in em_key. */
+ uint16_t em_key_bitlen;
+ /* unused. */
+ uint16_t unused0[3];
+} __rte_packed;
-/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_qcaps_output {
+/* hwrm_tf_em_insert_output (size:128b/16B) */
+struct hwrm_tf_em_insert_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Indicates the maximum number of context memory which can be registered. */
- uint16_t max_entries;
- uint8_t unused_0[5];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __attribute__((packed));
+ /* EM record pointer index. */
+ uint16_t rptr_index;
+ /* EM record offset 0~3. */
+ uint8_t rptr_entry;
+ /* Number of word entries consumed by the key. */
+ uint8_t num_of_entries;
+ /* unused. */
+ uint32_t unused0;
+} __rte_packed;
-/**********************
- * hwrm_cfa_eem_qcaps *
- **********************/
+/*********************
+ * hwrm_tf_em_delete *
+ *********************/
-/* hwrm_cfa_eem_qcaps_input (size:192b/24B) */
-struct hwrm_cfa_eem_qcaps_input {
+/* hwrm_tf_em_delete_input (size:832b/104B) */
+struct hwrm_tf_em_delete_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /*
- * When set to 1, indicates the configuration will apply to TX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_rx bit can't be set.
- */
- #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x1)
- /*
- * When set to 1, indicates the configuration will apply to RX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_tx bit can't be set.
- */
- #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x2)
- /* When set to 1, all offloaded flows will be sent to EEM. */
- #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x4)
- uint32_t unused_0;
-} __attribute__((packed));
+ /* Session Id. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX
+ /* Unused0 */
+ uint16_t unused0;
+ /* EM internal flow hanndle. */
+ uint64_t flow_handle;
+ /* EM Key value */
+ uint64_t em_key[8];
+ /* Number of bits in em_key. */
+ uint16_t em_key_bitlen;
+ /* unused. */
+ uint16_t unused1[3];
+} __rte_packed;
-/* hwrm_cfa_eem_qcaps_output (size:320b/40B) */
-struct hwrm_cfa_eem_qcaps_output {
+/* hwrm_tf_em_delete_output (size:128b/16B) */
+struct hwrm_tf_em_delete_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /*
- * When set to 1, indicates the configuration will apply to TX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_rx bit can't be set.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX \
- UINT32_C(0x1)
- /*
- * When set to 1, indicates the configuration will apply to RX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_tx bit can't be set.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \
- UINT32_C(0x2)
- /*
- * When set to 1, indicates the the FW supports the Centralized
- * Memory Model. The concept designates one entity for the
- * memory allocation while all others ‘subscribe’ to it.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
- UINT32_C(0x4)
- /*
- * When set to 1, indicates the the FW supports the Detached
- * Centralized Memory Model. The memory is allocated and managed
- * as a separate entity. All PFs and VFs will be granted direct
- * or semi-direct access to the allocated memory while none of
- * which can interfere with the management of the memory.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
- UINT32_C(0x8)
- uint32_t unused_0;
- uint32_t supported;
- /*
- * If set to 1, then EEM KEY0 table is supported using crc32 hash.
- * If set to 0, EEM KEY0 table is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
- UINT32_C(0x1)
- /*
- * If set to 1, then EEM KEY1 table is supported using lookup3 hash.
- * If set to 0, EEM KEY1 table is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
- UINT32_C(0x2)
- /*
- * If set to 1, then EEM External Record table is supported.
- * If set to 0, EEM External Record table is not supported.
- * (This table includes action record, EFC pointers, encap pointers)
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
- UINT32_C(0x4)
- /*
- * If set to 1, then EEM External Flow Counters table is supported.
- * If set to 0, EEM External Flow Counters table is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
- UINT32_C(0x8)
- /*
- * If set to 1, then FID table used for implicit flow flush is supported.
- * If set to 0, then FID table used for implicit flow flush is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
- UINT32_C(0x10)
- /*
- * The maximum number of entries supported by EEM. When configuring the host memory
- * the number of numbers of entries that can supported are -
- * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries.
- * Any value that are not these values, the FW will round down to the closest support
- * number of entries.
- */
- uint32_t max_entries_supported;
- /* The entry size in bytes of each entry in the EEM KEY0/KEY1 tables. */
- uint16_t key_entry_size;
- /* The entry size in bytes of each entry in the EEM RECORD tables. */
- uint16_t record_entry_size;
- /* The entry size in bytes of each entry in the EEM EFC tables. */
- uint16_t efc_entry_size;
- /* The FID size in bytes of each entry in the EEM FID tables. */
- uint16_t fid_entry_size;
- uint8_t unused_1[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __attribute__((packed));
+ /* Original stack allocation index. */
+ uint16_t em_index;
+ /* unused. */
+ uint16_t unused0[3];
+} __rte_packed;
/********************
- * hwrm_cfa_eem_cfg *
+ * hwrm_tf_tcam_set *
********************/
-/* hwrm_cfa_eem_cfg_input (size:384b/48B) */
-struct hwrm_cfa_eem_cfg_input {
+/* hwrm_tf_tcam_set_input (size:1024b/128B) */
+struct hwrm_tf_tcam_set_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX
/*
- * When set to 1, indicates the configuration will apply to TX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_rx bit can't be set.
+ * Indicate device data is being sent via DMA, the device
+ * data is packing does not change.
*/
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x1)
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DMA UINT32_C(0x2)
/*
- * When set to 1, indicates the configuration will apply to RX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_tx bit can't be set.
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
*/
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x2)
- /* When set to 1, all offloaded flows will be sent to EEM. */
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x4)
- /* When set to 1, secondary, 0 means primary. */
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_SECONDARY_PF \
- UINT32_C(0x8)
+ uint32_t type;
+ /* Index of TCAM entry. */
+ uint16_t idx;
+ /* Number of bytes in the TCAM key. */
+ uint8_t key_size;
+ /* Number of bytes in the TCAM result. */
+ uint8_t result_size;
/*
- * Group_id which used by Firmware to identify memory pools belonging
- * to certain group.
+ * Offset from which the mask bytes start in the device data
+ * array, key offset is always 0.
*/
- uint16_t group_id;
- uint16_t unused_0;
+ uint8_t mask_offset;
+ /* Offset from which the result bytes start in the device data array. */
+ uint8_t result_offset;
+ /* unused. */
+ uint8_t unused0[6];
/*
- * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
- * RECORD, EFC all have the same number of entries and all tables will be configured
- * using this value. Current minimum value is 32k. Current maximum value is 128M.
+ * TCAM key located at offset 0, mask located at mask_offsec
+ * and result at result_offsec for the device.
*/
- uint32_t num_entries;
- uint32_t unused_1;
- /* Configured EEM with the given context if for KEY0 table. */
- uint16_t key0_ctx_id;
- /* Configured EEM with the given context if for KEY1 table. */
- uint16_t key1_ctx_id;
- /* Configured EEM with the given context if for RECORD table. */
- uint16_t record_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t efc_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t fid_ctx_id;
- uint16_t unused_2;
- uint32_t unused_3;
-} __attribute__((packed));
+ uint8_t dev_data[88];
+} __rte_packed;
-/* hwrm_cfa_eem_cfg_output (size:128b/16B) */
-struct hwrm_cfa_eem_cfg_output {
+/* hwrm_tf_tcam_set_output (size:128b/16B) */
+struct hwrm_tf_tcam_set_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*********************
- * hwrm_cfa_eem_qcfg *
- *********************/
+/********************
+ * hwrm_tf_tcam_get *
+ ********************/
-/* hwrm_cfa_eem_qcfg_input (size:192b/24B) */
-struct hwrm_cfa_eem_qcfg_input {
+/* hwrm_tf_tcam_get_input (size:256b/32B) */
+struct hwrm_tf_tcam_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
uint32_t flags;
- /* When set to 1, indicates the configuration is the TX flow. */
- #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
- /* When set to 1, indicates the configuration is the RX flow. */
- #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
- uint32_t unused_0;
-} __attribute__((packed));
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX
+ /*
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Index of a TCAM entry. */
+ uint16_t idx;
+ /* unused. */
+ uint16_t unused0;
+} __rte_packed;
-/* hwrm_cfa_eem_qcfg_output (size:256b/32B) */
-struct hwrm_cfa_eem_qcfg_output {
+/* hwrm_tf_tcam_get_output (size:2368b/296B) */
+struct hwrm_tf_tcam_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /* When set to 1, indicates the configuration is the TX flow. */
- #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_TX \
- UINT32_C(0x1)
- /* When set to 1, indicates the configuration is the RX flow. */
- #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_RX \
- UINT32_C(0x2)
- /* When set to 1, all offloaded flows will be sent to EEM. */
- #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x4)
- /* The number of entries the FW has configured for EEM. */
- uint32_t num_entries;
- /* Configured EEM with the given context if for KEY0 table. */
- uint16_t key0_ctx_id;
- /* Configured EEM with the given context if for KEY1 table. */
- uint16_t key1_ctx_id;
- /* Configured EEM with the given context if for RECORD table. */
- uint16_t record_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t efc_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t fid_ctx_id;
- uint8_t unused_2[5];
+ /* Number of bytes in the TCAM key. */
+ uint8_t key_size;
+ /* Number of bytes in the TCAM entry. */
+ uint8_t result_size;
+ /* Offset from which the mask bytes start in the device data array. */
+ uint8_t mask_offset;
+ /* Offset from which the result bytes start in the device data array. */
+ uint8_t result_offset;
+ /* unused. */
+ uint8_t unused0[4];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * TCAM key located at offset 0, mask located at mask_offsec
+ * and result at result_offsec for the device.
+ */
+ uint8_t dev_data[272];
+ /* unused. */
+ uint8_t unused1[7];
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************
- * hwrm_cfa_eem_op *
- *******************/
+/*********************
+ * hwrm_tf_tcam_move *
+ *********************/
-/* hwrm_cfa_eem_op_input (size:192b/24B) */
-struct hwrm_cfa_eem_op_input {
+/* hwrm_tf_tcam_move_input (size:1024b/128B) */
+struct hwrm_tf_tcam_move_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX
/*
- * When set to 1, indicates the host memory which is passed will be
- * used for the TX flow offload function specified in fid.
- * Note if this bit is set then the path_rx bit can't be set.
- */
- #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
- /*
- * When set to 1, indicates the host memory which is passed will be
- * used for the RX flow offload function specified in fid.
- * Note if this bit is set then the path_tx bit can't be set.
- */
- #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
- uint16_t unused_0;
- /* The number of EEM key table entries to be configured. */
- uint16_t op;
- /* This value is reserved and should not be used. */
- #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
- /*
- * To properly stop EEM and ensure there are no DMA's, the caller
- * must disable EEM for the given PF, using this call. This will
- * safely disable EEM and ensure that all DMA'ed to the
- * keys/records/efc have been completed.
- */
- #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_DISABLE UINT32_C(0x1)
- /*
- * Once the EEM host memory has been configured, EEM options have
- * been configured. Then the caller should enable EEM for the given
- * PF. Note once this call has been made, then the EEM mechanism
- * will be active and DMA's will occur as packets are processed.
- */
- #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2)
- /*
- * Clear EEM settings for the given PF so that the register values
- * are reset back to there initial state.
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
*/
- #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3)
- #define HWRM_CFA_EEM_OP_INPUT_OP_LAST \
- HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP
-} __attribute__((packed));
+ uint32_t type;
+ /* Number of TCAM index pairs to be swapped for the device. */
+ uint16_t count;
+ /* unused. */
+ uint16_t unused0;
+ /* TCAM index pairs to be swapped for the device. */
+ uint16_t idx_pairs[48];
+} __rte_packed;
-/* hwrm_cfa_eem_op_output (size:128b/16B) */
-struct hwrm_cfa_eem_op_output {
+/* hwrm_tf_tcam_move_output (size:128b/16B) */
+struct hwrm_tf_tcam_move_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/********************************
- * hwrm_cfa_adv_flow_mgnt_qcaps *
- ********************************/
+/*********************
+ * hwrm_tf_tcam_free *
+ *********************/
-/* hwrm_cfa_adv_flow_mgnt_qcaps_input (size:256b/32B) */
-struct hwrm_cfa_adv_flow_mgnt_qcaps_input {
+/* hwrm_tf_tcam_free_input (size:1024b/128B) */
+struct hwrm_tf_tcam_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t unused_0[4];
-} __attribute__((packed));
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX
+ /*
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Number of TCAM index to be deleted for the device. */
+ uint16_t count;
+ /* unused. */
+ uint16_t unused0;
+ /* TCAM index list to be deleted for the device. */
+ uint16_t idx_list[48];
+} __rte_packed;
-/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */
-struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
+/* hwrm_tf_tcam_free_output (size:128b/16B) */
+struct hwrm_tf_tcam_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /*
- * Value of 1 to indicate firmware support 16-bit flow handle.
- * Value of 0 to indicate firmware not support 16-bit flow handle.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_16BIT_SUPPORTED \
- UINT32_C(0x1)
- /*
- * Value of 1 to indicate firmware support 64-bit flow handle.
- * Value of 0 to indicate firmware not support 64-bit flow handle.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \
- UINT32_C(0x2)
- /*
- * Value of 1 to indicate firmware support flow batch delete operation through
- * HWRM_CFA_FLOW_FLUSH command.
- * Value of 0 to indicate that the firmware does not support flow batch delete
- * operation.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \
- UINT32_C(0x4)
- /*
- * Value of 1 to indicate that the firmware support flow reset all operation through
- * HWRM_CFA_FLOW_FLUSH command.
- * Value of 0 indicates firmware does not support flow reset all operation.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \
- UINT32_C(0x8)
- /*
- * Value of 1 to indicate that firmware supports use of FID as dest_id in
- * HWRM_CFA_NTUPLE_ALLOC/CFG commands.
- * Value of 0 indicates firmware does not support use of FID as dest_id.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \
- UINT32_C(0x10)
- /*
- * Value of 1 to indicate that firmware supports TX EEM flows.
- * Value of 0 indicates firmware does not support TX EEM flows.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TX_EEM_FLOW_SUPPORTED \
- UINT32_C(0x20)
- /*
- * Value of 1 to indicate that firmware supports RX EEM flows.
- * Value of 0 indicates firmware does not support RX EEM flows.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \
- UINT32_C(0x40)
+ /* unused. */
+ uint8_t unused0[7];
/*
- * Value of 1 to indicate that firmware supports the dynamic allocation of an
- * on-chip flow counter which can be used for EEM flows.
- * Value of 0 indicates firmware does not support the dynamic allocation of an
- * on-chip flow counter.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_COUNTER_ALLOC_SUPPORTED \
- UINT32_C(0x80)
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_tf_global_cfg_set *
+ **************************/
+
+
+/* hwrm_tf_global_cfg_set_input (size:448b/56B) */
+struct hwrm_tf_global_cfg_set_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * Value of 1 to indicate that firmware supports setting of
- * rfs_ring_tbl_idx in HWRM_CFA_NTUPLE_ALLOC command.
- * Value of 0 indicates firmware does not support rfs_ring_tbl_idx.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_SUPPORTED \
- UINT32_C(0x100)
+ uint16_t cmpl_ring;
/*
- * Value of 1 to indicate that firmware supports untagged matching
- * criteria on HWRM_CFA_L2_FILTER_ALLOC command. Value of 0
- * indicates firmware does not support untagged matching.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_UNTAGGED_VLAN_SUPPORTED \
- UINT32_C(0x200)
+ uint16_t seq_id;
/*
- * Value of 1 to indicate that firmware supports XDP filter. Value
- * of 0 indicates firmware does not support XDP filter.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_XDP_SUPPORTED \
- UINT32_C(0x400)
+ uint16_t target_id;
/*
- * Value of 1 to indicate that the firmware support L2 header source
- * fields matching criteria on HWRM_CFA_L2_FILTER_ALLOC command.
- * Value of 0 indicates firmware does not support L2 header source
- * fields matching.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \
- UINT32_C(0x800)
- uint8_t unused_0[3];
+ uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX
+ /* Global Cfg type */
+ uint32_t type;
+ /* Offset of the type */
+ uint32_t offset;
+ /* Size of the data to set in bytes */
+ uint16_t size;
+ /* unused. */
+ uint8_t unused0[6];
+ /* Data to set */
+ uint8_t data[16];
+} __rte_packed;
+
+/* hwrm_tf_global_cfg_set_output (size:128b/16B) */
+struct hwrm_tf_global_cfg_set_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************
- * hwrm_cfa_tflib *
- ******************/
+/**************************
+ * hwrm_tf_global_cfg_get *
+ **************************/
-/* hwrm_cfa_tflib_input (size:1024b/128B) */
-struct hwrm_cfa_tflib_input {
+/* hwrm_tf_global_cfg_get_input (size:320b/40B) */
+struct hwrm_tf_global_cfg_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* TFLIB message type. */
- uint16_t tf_type;
- /* TFLIB message subtype. */
- uint16_t tf_subtype;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX
+ /* Global Cfg type */
+ uint32_t type;
+ /* Offset of the type */
+ uint32_t offset;
+ /* Size of the data to set in bytes */
+ uint16_t size;
/* unused. */
- uint8_t unused0[4];
- /* TFLIB request data. */
- uint32_t tf_req[26];
-} __attribute__((packed));
+ uint8_t unused0[6];
+} __rte_packed;
-/* hwrm_cfa_tflib_output (size:5632b/704B) */
-struct hwrm_cfa_tflib_output {
+/* hwrm_tf_global_cfg_get_output (size:256b/32B) */
+struct hwrm_tf_global_cfg_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* TFLIB message type. */
- uint16_t tf_type;
- /* TFLIB message subtype. */
- uint16_t tf_subtype;
- /* TFLIB response code */
- uint32_t tf_resp_code;
- /* TFLIB response data. */
- uint32_t tf_resp[170];
+ /* Size of the data read in bytes */
+ uint16_t size;
/* unused. */
- uint8_t unused1[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __attribute__((packed));
+ uint8_t unused0[6];
+ /* Data to set */
+ uint8_t data[16];
+} __rte_packed;
/******************************
* hwrm_tunnel_dst_port_query *
#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \
HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */
struct hwrm_tunnel_dst_port_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************************
* hwrm_tunnel_dst_port_alloc *
*/
uint16_t tunnel_dst_port_val;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */
struct hwrm_tunnel_dst_port_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************
* hwrm_tunnel_dst_port_free *
*/
uint16_t tunnel_dst_port_id;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */
struct hwrm_tunnel_dst_port_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* Periodic statistics context DMA to host. */
/* ctx_hw_stats (size:1280b/160B) */
uint64_t rx_mcast_pkts;
/* Number of received broadcast packets */
uint64_t rx_bcast_pkts;
- /* Number of discarded packets on received path */
+ /* Number of discarded packets on receive path */
uint64_t rx_discard_pkts;
- /* Number of dropped packets on received path */
- uint64_t rx_drop_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
/* Number of received bytes for unicast traffic */
uint64_t rx_ucast_bytes;
/* Number of received bytes for multicast traffic */
uint64_t tx_mcast_pkts;
/* Number of transmitted broadcast packets */
uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
/* Number of discarded packets on transmit path */
uint64_t tx_discard_pkts;
- /* Number of dropped packets on transmit path */
- uint64_t tx_drop_pkts;
/* Number of transmitted bytes for unicast traffic */
uint64_t tx_ucast_bytes;
/* Number of transmitted bytes for multicast traffic */
uint64_t tpa_events;
/* Number of TPA aborts */
uint64_t tpa_aborts;
-} __attribute__((packed));
+} __rte_packed;
-/* Periodic statistics context DMA to host. */
+/*
+ * Extended periodic statistics context DMA to host. On cards that
+ * support TPA v2, additional TPA related stats exist and can be retrieved
+ * by DMA of ctx_hw_stats_ext, rather than legacy ctx_hw_stats structure.
+ */
/* ctx_hw_stats_ext (size:1344b/168B) */
struct ctx_hw_stats_ext {
/* Number of received unicast packets */
uint64_t rx_mcast_pkts;
/* Number of received broadcast packets */
uint64_t rx_bcast_pkts;
- /* Number of discarded packets on received path */
+ /* Number of discarded packets on receive path */
uint64_t rx_discard_pkts;
- /* Number of dropped packets on received path */
- uint64_t rx_drop_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
/* Number of received bytes for unicast traffic */
uint64_t rx_ucast_bytes;
/* Number of received bytes for multicast traffic */
uint64_t tx_mcast_pkts;
/* Number of transmitted broadcast packets */
uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
/* Number of discarded packets on transmit path */
uint64_t tx_discard_pkts;
- /* Number of dropped packets on transmit path */
- uint64_t tx_drop_pkts;
/* Number of transmitted bytes for unicast traffic */
uint64_t tx_ucast_bytes;
/* Number of transmitted bytes for multicast traffic */
uint64_t rx_tpa_bytes;
/* Number of TPA errors */
uint64_t rx_tpa_errors;
-} __attribute__((packed));
+} __rte_packed;
/* Periodic Engine statistics context DMA to host. */
/* ctx_eng_stats (size:512b/64B) */
* the unit is count of clock cycles
*/
uint64_t cdd_engine_usage;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_stat_ctx_alloc *
* for the periodic DMA updates.
*/
uint16_t stats_dma_length;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_alloc_output (size:128b/16B) */
struct hwrm_stat_ctx_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_stat_ctx_free *
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_free_output (size:128b/16B) */
struct hwrm_stat_ctx_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_stat_ctx_query *
uint64_t resp_addr;
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
- uint8_t unused_0[4];
-} __attribute__((packed));
+ uint8_t flags;
+ /*
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_STAT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ uint8_t unused_0[3];
+} __rte_packed;
/* hwrm_stat_ctx_query_output (size:1408b/176B) */
struct hwrm_stat_ctx_query_output {
uint64_t rx_bcast_pkts;
/* Number of received packets with error */
uint64_t rx_err_pkts;
- /* Number of dropped packets on received path */
+ /* Number of dropped packets on receive path */
uint64_t rx_drop_pkts;
/* Number of received bytes for unicast traffic */
uint64_t rx_ucast_bytes;
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
+
+/***************************
+ * hwrm_stat_ext_ctx_query *
+ ***************************/
+
+
+/* hwrm_stat_ext_ctx_query_input (size:192b/24B) */
+struct hwrm_stat_ext_ctx_query_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* ID of the extended statistics context that is being queried. */
+ uint32_t stat_ctx_id;
+ uint8_t flags;
+ /*
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_STAT_EXT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK \
+ UINT32_C(0x1)
+ uint8_t unused_0[3];
+} __rte_packed;
+
+/* hwrm_stat_ext_ctx_query_output (size:1472b/184B) */
+struct hwrm_stat_ext_ctx_query_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of received unicast packets */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of discarded packets on receive path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
+ /* Number of discarded packets on transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of TPA eligible packets */
+ uint64_t rx_tpa_eligible_pkt;
+ /* Number of TPA eligible bytes */
+ uint64_t rx_tpa_eligible_bytes;
+ /* Number of TPA packets */
+ uint64_t rx_tpa_pkt;
+ /* Number of TPA bytes */
+ uint64_t rx_tpa_bytes;
+ /* Number of TPA errors */
+ uint64_t rx_tpa_errors;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
/***************************
* hwrm_stat_ctx_eng_query *
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_eng_query_output (size:640b/80B) */
struct hwrm_stat_ctx_eng_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_stat_ctx_clr_stats *
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */
struct hwrm_stat_ctx_clr_stats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_pcie_qstats *
* PCIe statistics will be stored
*/
uint64_t pcie_stat_host_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_pcie_qstats_output (size:128b/16B) */
struct hwrm_pcie_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* PCIe Statistics Formats */
/* pcie_ctx_hw_stats (size:768b/96B) */
uint64_t pcie_tl_signal_integrity;
/* Number of times LTSSM entered Recovery state */
uint64_t pcie_link_integrity;
- /* Number of TLP bytes that have been trasmitted */
+ /* Report number of TLP bits that have been transmitted in Mbps */
uint64_t pcie_tx_traffic_rate;
- /* Number of TLP bytes that have been received */
+ /* Report number of TLP bits that have been received in Mbps */
uint64_t pcie_rx_traffic_rate;
- /* Number of DLLP bytes that have been trasmitted */
+ /* Number of DLLP bytes that have been transmitted */
uint64_t pcie_tx_dllp_statistics;
/* Number of DLLP bytes that have been received */
uint64_t pcie_rx_dllp_statistics;
* to Recovery
*/
uint64_t pcie_recovery_histogram;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_exec_fwd_resp *
*/
uint16_t encap_resp_target_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_exec_fwd_resp_output (size:128b/16B) */
struct hwrm_exec_fwd_resp_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_reject_fwd_resp *
*/
uint16_t encap_resp_target_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_reject_fwd_resp_output (size:128b/16B) */
struct hwrm_reject_fwd_resp_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************
* hwrm_fwd_resp *
uint64_t encap_resp_addr;
/* This is an encapsulated response. */
uint32_t encap_resp[24];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_fwd_resp_output (size:128b/16B) */
struct hwrm_fwd_resp_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************
* hwrm_fwd_async_event_cmpl *
uint8_t unused_0[6];
/* This is an encapsulated asynchronous event completion. */
uint32_t encap_async_event_cmpl[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_fwd_async_event_cmpl_output (size:128b/16B) */
struct hwrm_fwd_async_event_cmpl_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_nvm_raw_write_blk *
uint64_t resp_addr;
/*
* 64-bit Host Source Address.
- * This is the loation of the source data to be written.
+ * This is the location of the source data to be written.
*/
uint64_t host_src_addr;
/*
uint32_t dest_addr;
/* Length of data to be written, in bytes. */
uint32_t len;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_raw_write_blk_output (size:128b/16B) */
struct hwrm_nvm_raw_write_blk_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************
* hwrm_nvm_read *
/* The length of the data to be read, in bytes. */
uint32_t len;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_read_output (size:128b/16B) */
struct hwrm_nvm_read_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_nvm_raw_dump *
uint32_t offset;
/* Total length of NVRAM contents to be read, in bytes. */
uint32_t len;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_raw_dump_output (size:128b/16B) */
struct hwrm_nvm_raw_dump_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_nvm_get_dir_entries *
* This is the host address where the directory will be written.
*/
uint64_t host_dest_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_dir_entries_output (size:128b/16B) */
struct hwrm_nvm_get_dir_entries_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_get_dir_info *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_dir_info_output (size:192b/24B) */
struct hwrm_nvm_get_dir_info_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_nvm_write *
* The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length).
* If this value is less than the specified data length, it will be ignored.
* The response will contain the actual allocated item length, which may be greater than the requested item length.
- * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accomodate
+ * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate
* the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data).
*/
uint32_t dir_item_length;
uint32_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_write_output (size:128b/16B) */
struct hwrm_nvm_write_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_write_cmd_err (size:64b/8B) */
struct hwrm_nvm_write_cmd_err {
#define HWRM_NVM_WRITE_CMD_ERR_CODE_LAST \
HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_nvm_modify *
uint64_t host_src_addr;
/* 16-bit directory entry index. */
uint16_t dir_idx;
- uint8_t unused_0[2];
+ uint16_t flags;
+ /*
+ * This flag indicates the sender wants to modify a continuous NVRAM
+ * area using a batch of this HWRM requests. The offset of a request
+ * must be continuous to the end of previous request's. Firmware does
+ * not update the directory entry until receiving the last request,
+ * which is indicated by the batch_last flag.
+ * This flag is set usually when a sender does not have a block of
+ * memory that is big enough to hold the entire NVRAM data for send
+ * at one time.
+ */
+ #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_MODE UINT32_C(0x1)
+ /*
+ * This flag can be used only when the batch_mode flag is set.
+ * It indicates this request is the last of batch requests.
+ */
+ #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_LAST UINT32_C(0x2)
/* 32-bit NVRAM byte-offset to modify content from. */
uint32_t offset;
/*
*/
uint32_t len;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_modify_output (size:128b/16B) */
struct hwrm_nvm_modify_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_nvm_find_dir_entry *
#define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_LAST \
HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT
uint8_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_find_dir_entry_output (size:256b/32B) */
struct hwrm_nvm_find_dir_entry_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_nvm_erase_dir_entry *
/* Directory Entry Index */
uint16_t dir_idx;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_erase_dir_entry_output (size:128b/16B) */
struct hwrm_nvm_erase_dir_entry_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_get_dev_info *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_dev_info_output (size:256b/32B) */
struct hwrm_nvm_get_dev_info_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_nvm_mod_dir_entry *
* value of the content in the directory entry.
*/
uint32_t checksum;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_mod_dir_entry_output (size:128b/16B) */
struct hwrm_nvm_mod_dir_entry_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_nvm_verify_update *
*/
uint16_t dir_ext;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_verify_update_output (size:128b/16B) */
struct hwrm_nvm_verify_update_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_nvm_install_update *
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \
UINT32_C(0x1)
/*
- * If set to 1, then unspecifed images, images not in the package file, will be safely deleted.
+ * If set to 1, then unspecified images, images not in the package file, will be safely deleted.
* When combined with erase_unused_space then unspecified images will be securely erased.
*/
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \
*/
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \
UINT32_C(0x4)
+ /*
+ * If set to 1, FW will verify the package in the "UPDATE" NVM item
+ * without installing it. This flag is for FW internal use only.
+ * Users should not set this flag. The request will otherwise fail.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_VERIFY_ONLY \
+ UINT32_C(0x8)
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_install_update_output (size:192b/24B) */
struct hwrm_nvm_install_update_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_install_update_cmd_err (size:64b/8B) */
struct hwrm_nvm_install_update_cmd_err {
#define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_LAST \
HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_nvm_flush *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_flush_output (size:128b/16B) */
struct hwrm_nvm_flush_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_flush_cmd_err (size:64b/8B) */
struct hwrm_nvm_flush_cmd_err {
#define HWRM_NVM_FLUSH_CMD_ERR_CODE_LAST \
HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_get_variable *
#define HWRM_NVM_GET_VARIABLE_INPUT_FLAGS_FACTORY_DFLT \
UINT32_C(0x1)
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_variable_output (size:128b/16B) */
struct hwrm_nvm_get_variable_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_variable_cmd_err (size:64b/8B) */
struct hwrm_nvm_get_variable_cmd_err {
#define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LAST \
HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_set_variable *
#define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FACTORY_DEFAULT \
UINT32_C(0x80)
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_set_variable_output (size:128b/16B) */
struct hwrm_nvm_set_variable_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_set_variable_cmd_err (size:64b/8B) */
struct hwrm_nvm_set_variable_cmd_err {
#define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_LAST \
HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_nvm_validate_option *
/* index for the 4th dimensions */
uint16_t index_3;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_validate_option_output (size:128b/16B) */
struct hwrm_nvm_validate_option_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_validate_option_cmd_err (size:64b/8B) */
struct hwrm_nvm_validate_option_cmd_err {
#define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_LAST \
HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
+
+/****************
+ * hwrm_oem_cmd *
+ ****************/
+
+
+/* hwrm_oem_cmd_input (size:1024b/128B) */
+struct hwrm_oem_cmd_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t IANA;
+ uint32_t unused_0;
+ /* This field contains the vendor specific command data. */
+ uint32_t oem_data[26];
+} __rte_packed;
+
+/* hwrm_oem_cmd_output (size:768b/96B) */
+struct hwrm_oem_cmd_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t IANA;
+ uint32_t unused_0;
+ /* This field contains the vendor specific response data. */
+ uint32_t oem_data[18];
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_fw_reset *
+ ******************/
+
+
+/* hwrm_fw_reset_input (size:192b/24B) */
+struct hwrm_fw_reset_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Type of embedded processor. */
+ uint8_t embedded_proc_type;
+ /* Boot Processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_BOOT \
+ UINT32_C(0x0)
+ /* Management Processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_MGMT \
+ UINT32_C(0x1)
+ /* Network control processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_NETCTRL \
+ UINT32_C(0x2)
+ /* RoCE control processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_ROCE \
+ UINT32_C(0x3)
+ /*
+ * Host (in multi-host environment): This is only valid if requester is IPC.
+ * Reinit host hardware resources and PCIe.
+ */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST \
+ UINT32_C(0x4)
+ /* AP processor complex (in multi-host environment). Use host_idx to control which core is reset */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_AP \
+ UINT32_C(0x5)
+ /* Reset all blocks of the chip (including all processors) */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_CHIP \
+ UINT32_C(0x6)
+ /*
+ * Host (in multi-host environment): This is only valid if requester is IPC.
+ * Reinit host hardware resources.
+ */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT \
+ UINT32_C(0x7)
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_LAST \
+ HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT
+ /* Type of self reset. */
+ uint8_t selfrst_status;
+ /* No Self Reset */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTNONE \
+ UINT32_C(0x0)
+ /* Self Reset as soon as possible to do so safely */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTASAP \
+ UINT32_C(0x1)
+ /* Self Reset on PCIe Reset */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTPCIERST \
+ UINT32_C(0x2)
+ /* Self Reset immediately after notification to all clients. */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \
+ UINT32_C(0x3)
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_LAST \
+ HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE
+ /*
+ * Indicate which host is being reset. 0 means first host.
+ * Only valid when embedded_proc_type is host in multihost
+ * environment
+ */
+ uint8_t host_idx;
+ uint8_t flags;
+ /*
+ * When this bit is '1', then the core firmware initiates
+ * the reset only after graceful shut down of all registered instances.
+ * If not, the device will continue with the existing firmware.
+ */
+ #define HWRM_FW_RESET_INPUT_FLAGS_RESET_GRACEFUL UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_fw_reset_output (size:128b/16B) */
+struct hwrm_fw_reset_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Type of self reset. */
+ uint8_t selfrst_status;
+ /* No Self Reset */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTNONE \
+ UINT32_C(0x0)
+ /* Self Reset as soon as possible to do so safely */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTASAP \
+ UINT32_C(0x1)
+ /* Self Reset on PCIe Reset */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTPCIERST \
+ UINT32_C(0x2)
+ /* Self Reset immediately after notification to all clients. */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \
+ UINT32_C(0x3)
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_LAST \
+ HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_ts_query *
+ ***********************/
+
+
+/* hwrm_port_ts_query_input (size:192b/24B) */
+struct hwrm_port_ts_query_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH 0x1UL
+ /* tx path */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_TX 0x0UL
+ /* rx path */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX 0x1UL
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_LAST \
+ HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX
+ /*
+ * If set, the response includes the current value of the free
+ * running timer.
+ */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_CURRENT_TIME 0x2UL
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_port_ts_query_output (size:192b/24B) */
+struct hwrm_port_ts_query_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Timestamp value of PTP message captured, or current value of
+ * free running timer.
+ */
+ uint32_t ptp_msg_ts[2];
+ /* Sequence ID of the PTP message captured. */
+ uint16_t ptp_msg_seqid;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*
+ * This structure is fixed at the beginning of the ChiMP SRAM (GRC
+ * offset: 0x31001F0). Host software is expected to read from this
+ * location for a defined signature. If it exists, the software can
+ * assume the presence of this structure and the validity of the
+ * FW_STATUS location in the next field.
+ */
+/* hcomm_status (size:64b/8B) */
+struct hcomm_status {
+ uint32_t sig_ver;
+ /*
+ * This field defines the version of the structure. The latest
+ * version value is 1.
+ */
+ #define HCOMM_STATUS_VER_MASK UINT32_C(0xff)
+ #define HCOMM_STATUS_VER_SFT 0
+ #define HCOMM_STATUS_VER_LATEST UINT32_C(0x1)
+ #define HCOMM_STATUS_VER_LAST HCOMM_STATUS_VER_LATEST
+ /*
+ * This field is to store the signature value to indicate the
+ * presence of the structure.
+ */
+ #define HCOMM_STATUS_SIGNATURE_MASK UINT32_C(0xffffff00)
+ #define HCOMM_STATUS_SIGNATURE_SFT 8
+ #define HCOMM_STATUS_SIGNATURE_VAL (UINT32_C(0x484353) << 8)
+ #define HCOMM_STATUS_SIGNATURE_LAST HCOMM_STATUS_SIGNATURE_VAL
+ uint32_t fw_status_loc;
+ #define HCOMM_STATUS_TRUE_ADDR_SPACE_MASK UINT32_C(0x3)
+ #define HCOMM_STATUS_TRUE_ADDR_SPACE_SFT 0
+ /* PCIE configuration space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_PCIE_CFG UINT32_C(0x0)
+ /* GRC space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_GRC UINT32_C(0x1)
+ /* BAR0 space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR0 UINT32_C(0x2)
+ /* BAR1 space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1 UINT32_C(0x3)
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_LAST \
+ HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1
+ /*
+ * This offset where the fw_status register is located. The value
+ * is generally 4-byte aligned.
+ */
+ #define HCOMM_STATUS_TRUE_OFFSET_MASK UINT32_C(0xfffffffc)
+ #define HCOMM_STATUS_TRUE_OFFSET_SFT 2
+} __rte_packed;
+/* This is the GRC offset where the hcomm_status struct resides. */
+#define HCOMM_STATUS_STRUCT_LOC 0x31001F0UL
+
+/**************************
+ * hwrm_cfa_counter_qcaps *
+ **************************/
+
+
+/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_counter_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */
+struct hwrm_cfa_counter_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /* Enumeration denoting the supported CFA counter format. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \
+ UINT32_C(0x1)
+ /* CFA counter types are not supported. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \
+ UINT32_C(0x0)
+ /* 64-bit packet counters followed by 64-bit byte counters format. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \
+ UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \
+ HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT
+ uint32_t unused_0;
+ /* Minimum guaranteed number of flow counters supported for this function, in RX direction. */
+ uint32_t min_rx_fc;
+ /* Maximum non-guaranteed number of flow counters supported for this function, in RX direction. */
+ uint32_t max_rx_fc;
+ /* Minimum guaranteed number of flow counters supported for this function, in TX direction. */
+ uint32_t min_tx_fc;
+ /* Maximum non-guaranteed number of flow counters supported for this function, in TX direction. */
+ uint32_t max_tx_fc;
+ /* Minimum guaranteed number of extension flow counters supported for this function, in RX direction. */
+ uint32_t min_rx_efc;
+ /* Maximum non-guaranteed number of extension flow counters supported for this function, in RX direction. */
+ uint32_t max_rx_efc;
+ /* Minimum guaranteed number of extension flow counters supported for this function, in TX direction. */
+ uint32_t min_tx_efc;
+ /* Maximum non-guaranteed number of extension flow counters supported for this function, in TX direction. */
+ uint32_t max_tx_efc;
+ /* Minimum guaranteed number of meter drop counters supported for this function, in RX direction. */
+ uint32_t min_rx_mdc;
+ /* Maximum non-guaranteed number of meter drop counters supported for this function, in RX direction. */
+ uint32_t max_rx_mdc;
+ /* Minimum guaranteed number of meter drop counters supported for this function, in TX direction. */
+ uint32_t min_tx_mdc;
+ /* Maximum non-guaranteed number of meter drop counters supported for this function, in TX direction. */
+ uint32_t max_tx_mdc;
+ /* Maximum guaranteed number of flow counters which can be used during flow alloc. */
+ uint32_t max_flow_alloc_fc;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/************************
+ * hwrm_cfa_counter_cfg *
+ ************************/
+
+
+/* hwrm_cfa_counter_cfg_input (size:256b/32B) */
+struct hwrm_cfa_counter_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint16_t flags;
+ /* Enumeration denoting the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \
+ UINT32_C(0x1)
+ /* Disable the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \
+ UINT32_C(0x0)
+ /* Enable the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \
+ UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \
+ UINT32_C(0x2)
+ /* Tx path. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \
+ (UINT32_C(0x0) << 1)
+ /* Rx path. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \
+ (UINT32_C(0x1) << 1)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX
+ /* Enumeration denoting the data transfer mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \
+ UINT32_C(0xc)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2
+ /* Push mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \
+ (UINT32_C(0x0) << 2)
+ /* Pull mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \
+ (UINT32_C(0x1) << 2)
+ /* Pull on async update. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \
+ (UINT32_C(0x2) << 2)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC
+ uint16_t counter_type;
+ /* Flow counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0)
+ /* Extended flow counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1)
+ /* Meter drop counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC
+ /* Ctx memory handle to be used for the counter. */
+ uint16_t ctx_id;
+ /* Counter update cadence hint (only in Push mode). */
+ uint16_t update_tmr_ms;
+ /* Total number of entries. */
+ uint32_t num_entries;
+ uint32_t unused_0;
+} __rte_packed;
+
+/* hwrm_cfa_counter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_counter_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_cfa_counter_qstats *
+ ***************************/
+
+
+/* hwrm_cfa_counter_qstats_input (size:320b/40B) */
+struct hwrm_cfa_counter_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint16_t flags;
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* Tx path. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* Rx path. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX
+ uint16_t counter_type;
+ uint16_t input_flow_ctx_id;
+ uint16_t num_entries;
+ uint16_t delta_time_ms;
+ uint16_t meter_instance_id;
+ uint16_t mdc_ctx_id;
+ uint8_t unused_0[2];
+ uint64_t expected_count;
+} __rte_packed;
+
+/* hwrm_cfa_counter_qstats_output (size:128b/16B) */
+struct hwrm_cfa_counter_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
#endif /* _HSI_STRUCT_DEF_DPDK_H_ */