-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2017 Broadcom Limited.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017-2018 Broadcom
+ * All rights reserved.
*/
#include <inttypes.h>
bp = (struct bnxt *)eth_dev->data->dev_private;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set Tx loopback on non-PF port %d!\n",
port);
return -ENOTSUP;
bp = (struct bnxt *)eth_dev->data->dev_private;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set all queues drop on non-PF port!\n");
return -ENOTSUP;
}
bp->vnic_info[i].bd_stall = !on;
rc = bnxt_hwrm_vnic_cfg(bp, &bp->vnic_info[i]);
if (rc) {
- RTE_LOG(ERR, PMD, "Failed to update PF VNIC %d.\n", i);
+ PMD_DRV_LOG(ERR, "Failed to update PF VNIC %d.\n", i);
return rc;
}
}
rte_pmd_bnxt_set_all_queues_drop_en_cb, &on,
bnxt_hwrm_vnic_cfg);
if (rc) {
- RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", i);
+ PMD_DRV_LOG(ERR, "Failed to update VF VNIC %d.\n", i);
break;
}
}
}
int rte_pmd_bnxt_set_vf_mac_addr(uint16_t port, uint16_t vf,
- struct ether_addr *mac_addr)
+ struct rte_ether_addr *mac_addr)
{
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set VF %d mac address on non-PF port %d!\n",
vf, port);
return -ENOTSUP;
/* Requested BW can't be greater than link speed */
if (tot_rate > eth_dev->data->dev_link.link_speed) {
- RTE_LOG(ERR, PMD, "Rate > Link speed. Set to %d\n", tot_rate);
+ PMD_DRV_LOG(ERR, "Rate > Link speed. Set to %d\n", tot_rate);
return -EINVAL;
}
bp = (struct bnxt *)dev->data->dev_private;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set mac spoof on non-PF port %d!\n", port);
return -EINVAL;
}
bp = (struct bnxt *)dev->data->dev_private;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set VLAN spoof on non-PF port %d!\n", port);
return -EINVAL;
}
rc = -1;
}
} else {
- RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", vf);
+ PMD_DRV_LOG(ERR, "Failed to update VF VNIC %d.\n", vf);
}
return rc;
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set VF %d stripq on non-PF port %d!\n",
vf, port);
return -ENOTSUP;
rte_pmd_bnxt_set_vf_vlan_stripq_cb, &on,
bnxt_hwrm_vnic_cfg);
if (rc)
- RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", vf);
+ PMD_DRV_LOG(ERR, "Failed to update VF VNIC %d.\n", vf);
return rc;
}
return -EINVAL;
if (rx_mask & ETH_VMDQ_ACCEPT_UNTAG) {
- RTE_LOG(ERR, PMD, "Currently cannot toggle this setting\n");
+ PMD_DRV_LOG(ERR, "Currently cannot toggle this setting\n");
return -ENOTSUP;
}
&bp->pf.vf_info[vf].l2_rx_mask,
bnxt_set_rx_mask_no_vlan);
if (rc)
- RTE_LOG(ERR, PMD, "bnxt_hwrm_func_vf_vnic_set_rxmask failed\n");
+ PMD_DRV_LOG(ERR, "bnxt_hwrm_func_vf_vnic_set_rxmask failed\n");
return rc;
}
struct bnxt_vnic_info vnic;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set VLAN table on non-PF port!\n");
return -EINVAL;
}
/* This simply indicates there's no driver loaded.
* This is not an error.
*/
- RTE_LOG(ERR, PMD, "Unable to get default VNIC for VF %d\n", vf);
+ PMD_DRV_LOG(ERR, "Unable to get default VNIC for VF %d\n", vf);
} else {
memset(&vnic, 0, sizeof(vnic));
vnic.fw_vnic_id = dflt_vnic;
/* Now check that there's space */
if (cnt == getpagesize() / sizeof(struct
bnxt_vlan_antispoof_table_entry)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"VLAN anti-spoof table is full\n");
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"VF %d cannot add VLAN %u\n",
i, vlan);
rc = -1;
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to get VF %d stats on non-PF port %d!\n",
vf_id, port);
return -ENOTSUP;
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to reset VF %d stats on non-PF port %d!\n",
vf_id, port);
return -ENOTSUP;
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to query VF %d RX stats on non-PF port %d!\n",
vf_id, port);
return -ENOTSUP;
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to query VF %d TX drops on non-PF port %d!\n",
vf_id, port);
return -ENOTSUP;
count);
}
-int rte_pmd_bnxt_mac_addr_add(uint16_t port, struct ether_addr *addr,
+int rte_pmd_bnxt_mac_addr_add(uint16_t port, struct rte_ether_addr *addr,
uint32_t vf_id)
{
struct rte_eth_dev *dev;
struct bnxt *bp;
struct bnxt_filter_info *filter;
struct bnxt_vnic_info vnic;
- struct ether_addr dflt_mac;
+ struct rte_ether_addr dflt_mac;
int rc;
dev = &rte_eth_devices[port];
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to config VF %d MAC on non-PF port %d!\n",
vf_id, port);
return -ENOTSUP;
return -EINVAL;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set VF %d vlan insert on non-PF port %d!\n",
vf, port);
return -ENOTSUP;
bp = (struct bnxt *)dev->data->dev_private;
if (!BNXT_PF(bp)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Attempt to set persist stats on non-PF port %d!\n",
port);
return -EINVAL;
git.droids-corp.org / dpdk.git / blobdiff