net: add rte prefix to ether defines
[dpdk.git] / drivers / net / cxgbe / cxgbe_filter.h
index 7c469c8..0c67d2d 100644 (file)
@@ -6,7 +6,7 @@
 #ifndef _CXGBE_FILTER_H_
 #define _CXGBE_FILTER_H_
 
-#include "t4_msg.h"
+#include "base/t4_msg.h"
 /*
  * Defined bit width of user definable filter tuples
  */
@@ -77,6 +77,7 @@ struct ch_filter_tuple {
  * Filter specification
  */
 struct ch_filter_specification {
+       void *private;
        /* Administrative fields for filter. */
        uint32_t hitcnts:1;     /* count filter hits in TCB */
        uint32_t prio:1;        /* filter has priority over active/server */
@@ -98,6 +99,24 @@ struct ch_filter_specification {
        uint32_t dirsteer:1;    /* 0 => RSS, 1 => steer to iq */
        uint32_t iq:10;         /* ingress queue */
 
+       uint32_t eport:2;       /* egress port to switch packet out */
+       uint32_t swapmac:1;     /* swap SMAC/DMAC for loopback packet */
+       uint32_t newvlan:2;     /* rewrite VLAN Tag */
+       uint8_t dmac[RTE_ETHER_ADDR_LEN];   /* new destination MAC address */
+       uint16_t vlan;          /* VLAN Tag to insert */
+
+       /*
+        * Switch proxy/rewrite fields.  An ingress packet which matches a
+        * filter with "switch" set will be looped back out as an egress
+        * packet -- potentially with some header rewriting.
+        */
+       uint32_t nat_mode:3;    /* specify NAT operation mode */
+
+       uint8_t nat_lip[16];    /* local IP to use after NAT'ing */
+       uint8_t nat_fip[16];    /* foreign IP to use after NAT'ing */
+       uint16_t nat_lport;     /* local port number to use after NAT'ing */
+       uint16_t nat_fport;     /* foreign port number to use after NAT'ing */
+
        /* Filter rule value/mask pairs. */
        struct ch_filter_tuple val;
        struct ch_filter_tuple mask;
@@ -105,7 +124,25 @@ struct ch_filter_specification {
 
 enum {
        FILTER_PASS = 0,        /* default */
-       FILTER_DROP
+       FILTER_DROP,
+       FILTER_SWITCH
+};
+
+enum {
+       VLAN_REMOVE = 1,
+       VLAN_INSERT,
+       VLAN_REWRITE
+};
+
+enum {
+       NAT_MODE_NONE = 0,      /* No NAT performed */
+       NAT_MODE_DIP,           /* NAT on Dst IP */
+       NAT_MODE_DIP_DP,        /* NAT on Dst IP, Dst Port */
+       NAT_MODE_DIP_DP_SIP,    /* NAT on Dst IP, Dst Port and Src IP */
+       NAT_MODE_DIP_DP_SP,     /* NAT on Dst IP, Dst Port and Src Port */
+       NAT_MODE_SIP_SP,        /* NAT on Src IP and Src Port */
+       NAT_MODE_DIP_SIP_SP,    /* NAT on Dst IP, Src IP and Src Port */
+       NAT_MODE_ALL            /* NAT on entire 4-tuple */
 };
 
 enum filter_type {
@@ -142,6 +179,7 @@ struct filter_entry {
        u32 pending:1;              /* filter action is pending FW reply */
        struct filter_ctx *ctx;     /* caller's completion hook */
        struct clip_entry *clipt;   /* CLIP Table entry for IPv6 */
+       struct l2t_entry *l2t;      /* Layer Two Table entry for dmac */
        struct rte_eth_dev *dev;    /* Port's rte eth device */
        void *private;              /* For use by apps using filter_entry */
 
@@ -224,7 +262,11 @@ int cxgbe_del_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 int cxgbe_alloc_ftid(struct adapter *adap, unsigned int family);
 int init_hash_filter(struct adapter *adap);
 void hash_filter_rpl(struct adapter *adap, const struct cpl_act_open_rpl *rpl);
+void hash_del_filter_rpl(struct adapter *adap,
+                        const struct cpl_abort_rpl_rss *rpl);
 int validate_filter(struct adapter *adap, struct ch_filter_specification *fs);
 int cxgbe_get_filter_count(struct adapter *adapter, unsigned int fidx,
-                          u64 *c, bool get_byte);
+                          u64 *c, int hash, bool get_byte);
+int cxgbe_clear_filter_count(struct adapter *adapter, unsigned int fidx,
+                            int hash, bool clear_byte);
 #endif /* _CXGBE_FILTER_H_ */