net/dpaa2: add link status config support

[dpdk.git] / drivers / net / dpaa2 / dpaa2_ethdev.c

diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index 46532b2..fa9db17 100644 (file)
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -55,6 +55,8 @@
 
 static struct rte_dpaa2_driver rte_dpaa2_pmd;
 static int dpaa2_dev_uninit(struct rte_eth_dev *eth_dev);
+static int dpaa2_dev_set_link_up(struct rte_eth_dev *dev);
+static int dpaa2_dev_set_link_down(struct rte_eth_dev *dev);
 
 /**
  * Atomically reads the link status information from global
@@ -530,6 +532,9 @@ dpaa2_dev_start(struct rte_eth_dev *dev)
                return ret;
        }
 
+       /* Power up the phy. Needed to make the link go Up */
+       dpaa2_dev_set_link_up(dev);
+
        ret = dpni_get_qdid(dpni, CMD_PRI_LOW, priv->token,
                            DPNI_QUEUE_TX, &qdid);
        if (ret) {
@@ -613,6 +618,8 @@ dpaa2_dev_stop(struct rte_eth_dev *dev)
 
        PMD_INIT_FUNC_TRACE();
 
+       dpaa2_dev_set_link_down(dev);
+
        ret = dpni_disable(dpni, CMD_PRI_LOW, priv->token);
        if (ret) {
                PMD_INIT_LOG(ERR, "Failure (ret %d) in disabling dpni %d dev\n",
@@ -632,6 +639,7 @@ dpaa2_dev_close(struct rte_eth_dev *dev)
        struct dpaa2_dev_priv *priv = dev->data->dev_private;
        struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
        int i, ret;
+       struct rte_eth_link link;
        struct dpaa2_queue *dpaa2_q;
 
        PMD_INIT_FUNC_TRACE();
@@ -651,6 +659,9 @@ dpaa2_dev_close(struct rte_eth_dev *dev)
                             " error code %d\n", ret);
                return;
        }
+
+       memset(&link, 0, sizeof(link));
+       dpaa2_dev_atomic_write_link_status(dev, &link);
 }
 
 static void
@@ -989,6 +1000,111 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
        return 0;
 }
 
+/**
+ * Toggle the DPNI to enable, if not already enabled.
+ * This is not strictly PHY up/down - it is more of logical toggling.
+ */
+static int
+dpaa2_dev_set_link_up(struct rte_eth_dev *dev)
+{
+       int ret = -EINVAL;
+       struct dpaa2_dev_priv *priv;
+       struct fsl_mc_io *dpni;
+       int en = 0;
+
+       PMD_INIT_FUNC_TRACE();
+
+       priv = dev->data->dev_private;
+       dpni = (struct fsl_mc_io *)priv->hw;
+
+       if (dpni == NULL) {
+               RTE_LOG(ERR, PMD, "Device has not yet been configured");
+               return ret;
+       }
+
+       /* Check if DPNI is currently enabled */
+       ret = dpni_is_enabled(dpni, CMD_PRI_LOW, priv->token, &en);
+       if (ret) {
+               /* Unable to obtain dpni status; Not continuing */
+               PMD_DRV_LOG(ERR, "Interface Link UP failed (%d)", ret);
+               return -EINVAL;
+       }
+
+       /* Enable link if not already enabled */
+       if (!en) {
+               ret = dpni_enable(dpni, CMD_PRI_LOW, priv->token);
+               if (ret) {
+                       PMD_DRV_LOG(ERR, "Interface Link UP failed (%d)", ret);
+                       return -EINVAL;
+               }
+       }
+       /* changing tx burst function to start enqueues */
+       dev->tx_pkt_burst = dpaa2_dev_tx;
+       dev->data->dev_link.link_status = 1;
+
+       PMD_DRV_LOG(INFO, "Port %d Link UP successful", dev->data->port_id);
+       return ret;
+}
+
+/**
+ * Toggle the DPNI to disable, if not already disabled.
+ * This is not strictly PHY up/down - it is more of logical toggling.
+ */
+static int
+dpaa2_dev_set_link_down(struct rte_eth_dev *dev)
+{
+       int ret = -EINVAL;
+       struct dpaa2_dev_priv *priv;
+       struct fsl_mc_io *dpni;
+       int dpni_enabled = 0;
+       int retries = 10;
+
+       PMD_INIT_FUNC_TRACE();
+
+       priv = dev->data->dev_private;
+       dpni = (struct fsl_mc_io *)priv->hw;
+
+       if (dpni == NULL) {
+               RTE_LOG(ERR, PMD, "Device has not yet been configured");
+               return ret;
+       }
+
+       /*changing  tx burst function to avoid any more enqueues */
+       dev->tx_pkt_burst = dummy_dev_tx;
+
+       /* Loop while dpni_disable() attempts to drain the egress FQs
+        * and confirm them back to us.
+        */
+       do {
+               ret = dpni_disable(dpni, 0, priv->token);
+               if (ret) {
+                       PMD_DRV_LOG(ERR, "dpni disable failed (%d)", ret);
+                       return ret;
+               }
+               ret = dpni_is_enabled(dpni, 0, priv->token, &dpni_enabled);
+               if (ret) {
+                       PMD_DRV_LOG(ERR, "dpni_is_enabled failed (%d)", ret);
+                       return ret;
+               }
+               if (dpni_enabled)
+                       /* Allow the MC some slack */
+                       rte_delay_us(100 * 1000);
+       } while (dpni_enabled && --retries);
+
+       if (!retries) {
+               PMD_DRV_LOG(WARNING, "Retry count exceeded disabling DPNI\n");
+               /* todo- we may have to manually cleanup queues.
+                */
+       } else {
+               PMD_DRV_LOG(INFO, "Port %d Link DOWN successful",
+                           dev->data->port_id);
+       }
+
+       dev->data->dev_link.link_status = 0;
+
+       return ret;
+}
+
 static struct eth_dev_ops dpaa2_ethdev_ops = {
        .dev_configure    = dpaa2_eth_dev_configure,
        .dev_start            = dpaa2_dev_start,
@@ -998,6 +1114,8 @@ static struct eth_dev_ops dpaa2_ethdev_ops = {
        .promiscuous_disable  = dpaa2_dev_promiscuous_disable,
        .allmulticast_enable  = dpaa2_dev_allmulticast_enable,
        .allmulticast_disable = dpaa2_dev_allmulticast_disable,
+       .dev_set_link_up      = dpaa2_dev_set_link_up,
+       .dev_set_link_down    = dpaa2_dev_set_link_down,
        .link_update       = dpaa2_dev_link_update,
        .stats_get             = dpaa2_dev_stats_get,
        .stats_reset       = dpaa2_dev_stats_reset,