net/dpaa2: support parallel Rx
[dpdk.git] / drivers / net / dpaa2 / dpaa2_rxtx.c
index ff9a696..8476972 100644 (file)
@@ -242,17 +242,18 @@ eth_copy_mbuf_to_fd(struct rte_mbuf *mbuf,
 }
 
 uint16_t
-dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
+dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 {
-       /* Function is responsible to receive frames for a given device and VQ*/
+       /* Function receive frames for a given device and VQ*/
        struct dpaa2_queue *dpaa2_q = (struct dpaa2_queue *)queue;
        struct qbman_result *dq_storage;
        uint32_t fqid = dpaa2_q->fqid;
        int ret, num_rx = 0;
        uint8_t is_last = 0, status;
        struct qbman_swp *swp;
-       const struct qbman_fd *fd;
+       const struct qbman_fd *fd[DPAA2_DQRR_RING_SIZE];
        struct qbman_pull_desc pulldesc;
+       struct queue_storage_info_t *q_storage = dpaa2_q->q_storage;
        struct rte_eth_dev *dev = dpaa2_q->dev;
 
        if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
@@ -263,44 +264,51 @@ dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
                }
        }
        swp = DPAA2_PER_LCORE_PORTAL;
-       dq_storage = dpaa2_q->q_storage->dq_storage[0];
-
-       qbman_pull_desc_clear(&pulldesc);
-       qbman_pull_desc_set_numframes(&pulldesc,
-                                     (nb_pkts > DPAA2_DQRR_RING_SIZE) ?
-                                      DPAA2_DQRR_RING_SIZE : nb_pkts);
-       qbman_pull_desc_set_fq(&pulldesc, fqid);
-       /* todo optimization - we can have dq_storage_phys available*/
-       qbman_pull_desc_set_storage(&pulldesc, dq_storage,
+       if (!q_storage->active_dqs) {
+               q_storage->toggle = 0;
+               dq_storage = q_storage->dq_storage[q_storage->toggle];
+               qbman_pull_desc_clear(&pulldesc);
+               qbman_pull_desc_set_numframes(&pulldesc,
+                                             (nb_pkts > DPAA2_DQRR_RING_SIZE) ?
+                                              DPAA2_DQRR_RING_SIZE : nb_pkts);
+               qbman_pull_desc_set_fq(&pulldesc, fqid);
+               qbman_pull_desc_set_storage(&pulldesc, dq_storage,
                        (dma_addr_t)(DPAA2_VADDR_TO_IOVA(dq_storage)), 1);
-
-       /*Issue a volatile dequeue command. */
-       while (1) {
-               if (qbman_swp_pull(swp, &pulldesc)) {
-                       PMD_RX_LOG(ERR, "VDQ command is not issued."
-                                  "QBMAN is busy\n");
-                       /* Portal was busy, try again */
-                       continue;
+               if (check_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index)) {
+                       while (!qbman_check_command_complete(swp,
+                              get_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index)))
+                               ;
+                       clear_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index);
                }
-               break;
-       };
-
-       /* Receive the packets till Last Dequeue entry is found with
-        * respect to the above issues PULL command.
+               while (1) {
+                       if (qbman_swp_pull(swp, &pulldesc)) {
+                               PMD_RX_LOG(WARNING, "VDQ command is not issued."
+                                          "QBMAN is busy\n");
+                               /* Portal was busy, try again */
+                               continue;
+                       }
+                       break;
+               }
+               q_storage->active_dqs = dq_storage;
+               q_storage->active_dpio_id = DPAA2_PER_LCORE_DPIO->index;
+               set_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index, dq_storage);
+       }
+       dq_storage = q_storage->active_dqs;
+       /* Check if the previous issued command is completed.
+        * Also seems like the SWP is shared between the Ethernet Driver
+        * and the SEC driver.
         */
+       while (!qbman_check_command_complete(swp, dq_storage))
+               ;
+       if (dq_storage == get_swp_active_dqs(q_storage->active_dpio_id))
+               clear_swp_active_dqs(q_storage->active_dpio_id);
        while (!is_last) {
-               struct rte_mbuf *mbuf;
-               /*Check if the previous issued command is completed.
-                * Also seems like the SWP is shared between the
-                * Ethernet Driver and the SEC driver.
-                */
-               while (!qbman_check_command_complete(swp, dq_storage))
-                       ;
                /* Loop until the dq_storage is updated with
                 * new token by QBMAN
                 */
                while (!qbman_result_has_new_result(swp, dq_storage))
                        ;
+               rte_prefetch0((void *)((uint64_t)(dq_storage + 1)));
                /* Check whether Last Pull command is Expired and
                 * setting Condition for Loop termination
                 */
@@ -311,27 +319,50 @@ dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
                        if (unlikely((status & QBMAN_DQ_STAT_VALIDFRAME) == 0))
                                continue;
                }
+               fd[num_rx] = qbman_result_DQ_fd(dq_storage);
 
-               fd = qbman_result_DQ_fd(dq_storage);
-               mbuf = (struct rte_mbuf *)DPAA2_IOVA_TO_VADDR(
-                  DPAA2_GET_FD_ADDR(fd)
-                  - rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size);
-               /* Prefeth mbuf */
-               rte_prefetch0(mbuf);
                /* Prefetch Annotation address for the parse results */
-               rte_prefetch0((void *)((uint64_t)DPAA2_GET_FD_ADDR(fd)
-                                               + DPAA2_FD_PTA_SIZE + 16));
+               rte_prefetch0((void *)((uint64_t)DPAA2_GET_FD_ADDR(fd[num_rx])
+                               + DPAA2_FD_PTA_SIZE + 16));
 
-               bufs[num_rx] = eth_fd_to_mbuf(fd);
+               bufs[num_rx] = eth_fd_to_mbuf(fd[num_rx]);
                bufs[num_rx]->port = dev->data->port_id;
+               if (dev->data->dev_conf.rxmode.hw_vlan_strip)
+                       rte_vlan_strip(bufs[num_rx]);
 
-               num_rx++;
                dq_storage++;
-       } /* End of Packet Rx loop */
+               num_rx++;
+       }
+
+       if (check_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index)) {
+               while (!qbman_check_command_complete(swp,
+                      get_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index)))
+                       ;
+               clear_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index);
+       }
+       q_storage->toggle ^= 1;
+       dq_storage = q_storage->dq_storage[q_storage->toggle];
+       qbman_pull_desc_clear(&pulldesc);
+       qbman_pull_desc_set_numframes(&pulldesc, DPAA2_DQRR_RING_SIZE);
+       qbman_pull_desc_set_fq(&pulldesc, fqid);
+       qbman_pull_desc_set_storage(&pulldesc, dq_storage,
+                       (dma_addr_t)(DPAA2_VADDR_TO_IOVA(dq_storage)), 1);
+       /* Issue a volatile dequeue command. */
+       while (1) {
+               if (qbman_swp_pull(swp, &pulldesc)) {
+                       PMD_RX_LOG(WARNING, "VDQ command is not issued."
+                                  "QBMAN is busy\n");
+                       continue;
+               }
+               break;
+       }
+       q_storage->active_dqs = dq_storage;
+       q_storage->active_dpio_id = DPAA2_PER_LCORE_DPIO->index;
+       set_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index, dq_storage);
 
        dpaa2_q->rx_pkts += num_rx;
 
-       /*Return the total number of packets received to DPAA2 app*/
+       /* Return the total number of packets received to DPAA2 app */
        return num_rx;
 }