#include <rte_common.h>
#include <rte_interrupts.h>
#include <rte_byteorder.h>
-#include <rte_log.h>
#include <rte_debug.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
static int eth_em_led_off(struct rte_eth_dev *dev);
static int em_get_rx_buffer_size(struct e1000_hw *hw);
-static int eth_em_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
- uint32_t index, uint32_t pool);
+static int eth_em_rar_set(struct rte_eth_dev *dev,
+ struct rte_ether_addr *mac_addr,
+ uint32_t index, uint32_t pool);
static void eth_em_rar_clear(struct rte_eth_dev *dev, uint32_t index);
static int eth_em_default_mac_addr_set(struct rte_eth_dev *dev,
- struct ether_addr *addr);
+ struct rte_ether_addr *addr);
static int eth_em_set_mc_addr_list(struct rte_eth_dev *dev,
- struct ether_addr *mc_addr_set,
+ struct rte_ether_addr *mc_addr_set,
uint32_t nb_mc_addr);
#define EM_FC_PAUSE_TIME 0x0680
static enum e1000_fc_mode em_fc_setting = e1000_fc_full;
-int e1000_logtype_init;
-int e1000_logtype_driver;
-
/*
* The set of PCI devices this driver supports
*/
}
/* Allocate memory for storing MAC addresses */
- eth_dev->data->mac_addrs = rte_zmalloc("e1000", ETHER_ADDR_LEN *
+ eth_dev->data->mac_addrs = rte_zmalloc("e1000", RTE_ETHER_ADDR_LEN *
hw->mac.rar_entry_count, 0);
if (eth_dev->data->mac_addrs == NULL) {
PMD_INIT_LOG(ERR, "Failed to allocate %d bytes needed to "
"store MAC addresses",
- ETHER_ADDR_LEN * hw->mac.rar_entry_count);
+ RTE_ETHER_ADDR_LEN * hw->mac.rar_entry_count);
return -ENOMEM;
}
/* Copy the permanent MAC address */
- ether_addr_copy((struct ether_addr *) hw->mac.addr,
+ rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.addr,
eth_dev->data->mac_addrs);
/* initialize the vfta */
eth_dev->rx_pkt_burst = NULL;
eth_dev->tx_pkt_burst = NULL;
- rte_free(eth_dev->data->mac_addrs);
- eth_dev->data->mac_addrs = NULL;
-
/* disable uio intr before callback unregister */
rte_intr_disable(intr_handle);
rte_intr_callback_unregister(intr_handle,
return -EIO;
}
- E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN);
+ E1000_WRITE_REG(hw, E1000_VET, RTE_ETHER_TYPE_VLAN);
/* Configure for OS presence */
em_init_manageability(hw);
*/
rx_buf_size = em_get_rx_buffer_size(hw);
- hw->fc.high_water = rx_buf_size - PMD_ROUNDUP(ETHER_MAX_LEN * 2, 1024);
+ hw->fc.high_water = rx_buf_size -
+ PMD_ROUNDUP(RTE_ETHER_MAX_LEN * 2, 1024);
hw->fc.low_water = hw->fc.high_water - 1500;
if (hw->mac.type == e1000_80003es2lan)
return 0x1000;
/* Adapters that do not support jumbo frames */
case e1000_ich8lan:
- return ETHER_MAX_LEN;
+ return RTE_ETHER_MAX_LEN;
default:
return MAX_JUMBO_FRAME_SIZE;
}
/* clear interrupt */
E1000_READ_REG(hw, E1000_ICR);
regval = E1000_READ_REG(hw, E1000_IMS);
- E1000_WRITE_REG(hw, E1000_IMS, regval | E1000_ICR_LSC);
+ E1000_WRITE_REG(hw, E1000_IMS,
+ regval | E1000_ICR_LSC | E1000_ICR_OTHER);
return 0;
}
static void
em_lsc_intr_disable(struct e1000_hw *hw)
{
- E1000_WRITE_REG(hw, E1000_IMC, E1000_IMS_LSC);
+ E1000_WRITE_REG(hw, E1000_IMC, E1000_IMS_LSC | E1000_IMS_OTHER);
E1000_WRITE_FLUSH(hw);
}
PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x", rx_buf_size);
/* At least reserve one Ethernet frame for watermark */
- max_high_water = rx_buf_size - ETHER_MAX_LEN;
+ max_high_water = rx_buf_size - RTE_ETHER_MAX_LEN;
if ((fc_conf->high_water > max_high_water) ||
(fc_conf->high_water < fc_conf->low_water)) {
PMD_INIT_LOG(ERR, "e1000 incorrect high/low water value");
}
static int
-eth_em_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+eth_em_rar_set(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
uint32_t index, __rte_unused uint32_t pool)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
static void
eth_em_rar_clear(struct rte_eth_dev *dev, uint32_t index)
{
- uint8_t addr[ETHER_ADDR_LEN];
+ uint8_t addr[RTE_ETHER_ADDR_LEN];
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
memset(addr, 0, sizeof(addr));
static int
eth_em_default_mac_addr_set(struct rte_eth_dev *dev,
- struct ether_addr *addr)
+ struct rte_ether_addr *addr)
{
eth_em_rar_clear(dev, 0);
uint32_t rctl;
eth_em_infos_get(dev, &dev_info);
- frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE;
+ frame_size = mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN +
+ VLAN_TAG_SIZE;
/* check that mtu is within the allowed range */
- if ((mtu < ETHER_MIN_MTU) || (frame_size > dev_info.max_rx_pktlen))
+ if (mtu < RTE_ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen)
return -EINVAL;
/* refuse mtu that requires the support of scattered packets when this
rctl = E1000_READ_REG(hw, E1000_RCTL);
/* switch to jumbo mode if needed */
- if (frame_size > ETHER_MAX_LEN) {
+ if (frame_size > RTE_ETHER_MAX_LEN) {
dev->data->dev_conf.rxmode.offloads |=
DEV_RX_OFFLOAD_JUMBO_FRAME;
rctl |= E1000_RCTL_LPE;
static int
eth_em_set_mc_addr_list(struct rte_eth_dev *dev,
- struct ether_addr *mc_addr_set,
+ struct rte_ether_addr *mc_addr_set,
uint32_t nb_mc_addr)
{
struct e1000_hw *hw;
RTE_PMD_REGISTER_PCI_TABLE(net_e1000_em, pci_id_em_map);
RTE_PMD_REGISTER_KMOD_DEP(net_e1000_em, "* igb_uio | uio_pci_generic | vfio-pci");
-RTE_INIT(e1000_init_log);
-static void
-e1000_init_log(void)
+/* see e1000_logs.c */
+RTE_INIT(igb_init_log)
{
- e1000_logtype_init = rte_log_register("pmd.net.e1000.init");
- if (e1000_logtype_init >= 0)
- rte_log_set_level(e1000_logtype_init, RTE_LOG_NOTICE);
- e1000_logtype_driver = rte_log_register("pmd.net.e1000.driver");
- if (e1000_logtype_driver >= 0)
- rte_log_set_level(e1000_logtype_driver, RTE_LOG_NOTICE);
+ e1000_igb_init_log();
}
git.droids-corp.org / dpdk.git / blobdiff