/* Set the global registers with default ether type value */
if (!pf->support_multi_driver) {
ret = i40e_vlan_tpid_set(dev, ETH_VLAN_TYPE_OUTER,
- ETHER_TYPE_VLAN);
+ RTE_ETHER_TYPE_VLAN);
if (ret != I40E_SUCCESS) {
PMD_INIT_LOG(ERR,
"Failed to set the default outer "
}
if (!vsi->max_macaddrs)
- len = ETHER_ADDR_LEN;
+ len = RTE_ETHER_ADDR_LEN;
else
- len = ETHER_ADDR_LEN * vsi->max_macaddrs;
+ len = RTE_ETHER_ADDR_LEN * vsi->max_macaddrs;
/* Should be after VSI initialized */
dev->data->mac_addrs = rte_zmalloc("i40e", len, 0);
&nes->rx_broadcast);
/* exclude CRC bytes */
nes->rx_bytes -= (nes->rx_unicast + nes->rx_multicast +
- nes->rx_broadcast) * ETHER_CRC_LEN;
+ nes->rx_broadcast) * RTE_ETHER_CRC_LEN;
i40e_stat_update_32(hw, I40E_GLV_RDPC(idx), vsi->offset_loaded,
&oes->rx_discards, &nes->rx_discards);
/* exclude CRC size */
pf->internal_stats.rx_bytes -= (pf->internal_stats.rx_unicast +
pf->internal_stats.rx_multicast +
- pf->internal_stats.rx_broadcast) * ETHER_CRC_LEN;
+ pf->internal_stats.rx_broadcast) * RTE_ETHER_CRC_LEN;
/* Get statistics of struct i40e_eth_stats */
i40e_stat_update_48(hw, I40E_GLPRT_GORCH(hw->port),
pf->offset_loaded, &os->eth.rx_broadcast,
&ns->eth.rx_broadcast);
/* Workaround: CRC size should not be included in byte statistics,
- * so subtract ETHER_CRC_LEN from the byte counter for each rx packet.
+ * so subtract RTE_ETHER_CRC_LEN from the byte counter for each rx
+ * packet.
*/
ns->eth.rx_bytes -= (ns->eth.rx_unicast + ns->eth.rx_multicast +
- ns->eth.rx_broadcast) * ETHER_CRC_LEN;
+ ns->eth.rx_broadcast) * RTE_ETHER_CRC_LEN;
/* exclude internal rx bytes
* Workaround: it is possible I40E_GLV_GORCH[H/L] is updated before
pf->offset_loaded, &os->eth.tx_broadcast,
&ns->eth.tx_broadcast);
ns->eth.tx_bytes -= (ns->eth.tx_unicast + ns->eth.tx_multicast +
- ns->eth.tx_broadcast) * ETHER_CRC_LEN;
+ ns->eth.tx_broadcast) * RTE_ETHER_CRC_LEN;
/* exclude internal tx bytes
* Workaround: it is possible I40E_GLV_GOTCH[H/L] is updated before
dev_info->max_mac_addrs = vsi->max_macaddrs;
dev_info->max_vfs = pci_dev->max_vfs;
dev_info->max_mtu = dev_info->max_rx_pktlen - I40E_ETH_OVERHEAD;
- dev_info->min_mtu = ETHER_MIN_MTU;
+ dev_info->min_mtu = RTE_ETHER_MIN_MTU;
dev_info->rx_queue_offload_capa = 0;
dev_info->rx_offload_capa =
DEV_RX_OFFLOAD_VLAN_STRIP |
i40e_vsi_config_double_vlan(vsi, TRUE);
/* Set global registers with default ethertype. */
i40e_vlan_tpid_set(dev, ETH_VLAN_TYPE_OUTER,
- ETHER_TYPE_VLAN);
+ RTE_ETHER_TYPE_VLAN);
i40e_vlan_tpid_set(dev, ETH_VLAN_TYPE_INNER,
- ETHER_TYPE_VLAN);
+ RTE_ETHER_TYPE_VLAN);
}
else
i40e_vsi_config_double_vlan(vsi, FALSE);
return -EINVAL;
}
- rte_memcpy(&mac_filter.mac_addr, mac_addr, ETHER_ADDR_LEN);
+ rte_memcpy(&mac_filter.mac_addr, mac_addr, RTE_ETHER_ADDR_LEN);
if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
mac_filter.filter_type = RTE_MACVLAN_PERFECT_MATCH;
else
}
if (add) {
- rte_memcpy(&old_mac, hw->mac.addr, ETHER_ADDR_LEN);
+ rte_memcpy(&old_mac, hw->mac.addr, RTE_ETHER_ADDR_LEN);
rte_memcpy(hw->mac.addr, new_mac->addr_bytes,
- ETHER_ADDR_LEN);
+ RTE_ETHER_ADDR_LEN);
rte_memcpy(&mac_filter.mac_addr, &filter->mac_addr,
- ETHER_ADDR_LEN);
+ RTE_ETHER_ADDR_LEN);
mac_filter.filter_type = filter->filter_type;
ret = i40e_vsi_add_mac(vf->vsi, &mac_filter);
rte_ether_addr_copy(new_mac, &pf->dev_addr);
} else {
rte_memcpy(hw->mac.addr, hw->mac.perm_addr,
- ETHER_ADDR_LEN);
+ RTE_ETHER_ADDR_LEN);
ret = i40e_vsi_delete_mac(vf->vsi, &filter->mac_addr);
if (ret != I40E_SUCCESS) {
PMD_DRV_LOG(ERR, "Failed to delete MAC filter.");
}
/* MAC/VLAN configuration */
- rte_memcpy(&filter.mac_addr, &broadcast, ETHER_ADDR_LEN);
+ rte_memcpy(&filter.mac_addr, &broadcast, RTE_ETHER_ADDR_LEN);
filter.filter_type = RTE_MACVLAN_PERFECT_MATCH;
ret = i40e_vsi_add_mac(vsi, &filter);
int mac_num;
int ret = I40E_SUCCESS;
- if (!vsi || vlan > ETHER_MAX_VLAN_ID)
+ if (!vsi || vlan > RTE_ETHER_MAX_VLAN_ID)
return I40E_ERR_PARAM;
/* If it's already set, just return */
* Vlan 0 is the generic filter for untagged packets
* and can't be removed.
*/
- if (!vsi || vlan == 0 || vlan > ETHER_MAX_VLAN_ID)
+ if (!vsi || vlan == 0 || vlan > RTE_ETHER_MAX_VLAN_ID)
return I40E_ERR_PARAM;
/* If can't find it, just return */
return -EINVAL;
}
- if (filter->inner_vlan > ETHER_MAX_VLAN_ID) {
+ if (filter->inner_vlan > RTE_ETHER_MAX_VLAN_ID) {
PMD_DRV_LOG(ERR, "Invalid inner VLAN ID");
return -EINVAL;
}
i40e_ethertype_filter_convert(const struct rte_eth_ethertype_filter *input,
struct i40e_ethertype_filter *filter)
{
- rte_memcpy(&filter->input.mac_addr, &input->mac_addr, ETHER_ADDR_LEN);
+ rte_memcpy(&filter->input.mac_addr, &input->mac_addr,
+ RTE_ETHER_ADDR_LEN);
filter->input.ether_type = input->ether_type;
filter->flags = input->flags;
filter->queue = input->queue;
PMD_DRV_LOG(ERR, "Invalid queue ID");
return -EINVAL;
}
- if (filter->ether_type == ETHER_TYPE_IPv4 ||
- filter->ether_type == ETHER_TYPE_IPv6) {
+ if (filter->ether_type == RTE_ETHER_TYPE_IPv4 ||
+ filter->ether_type == RTE_ETHER_TYPE_IPv6) {
PMD_DRV_LOG(ERR,
"unsupported ether_type(0x%04x) in control packet filter.",
filter->ether_type);
return -EINVAL;
}
- if (filter->ether_type == ETHER_TYPE_VLAN)
+ if (filter->ether_type == RTE_ETHER_TYPE_VLAN)
PMD_DRV_LOG(WARNING,
"filter vlan ether_type in first tag is not supported.");
int ret = 0;
/* check if mtu is within the allowed range */
- if ((mtu < ETHER_MIN_MTU) || (frame_size > I40E_FRAME_SIZE_MAX))
+ if (mtu < RTE_ETHER_MIN_MTU || frame_size > I40E_FRAME_SIZE_MAX)
return -EINVAL;
/* mtu setting is forbidden if port is start */
return -EBUSY;
}
- if (frame_size > ETHER_MAX_LEN)
+ if (frame_size > RTE_ETHER_MAX_LEN)
dev_data->dev_conf.rxmode.offloads |=
DEV_RX_OFFLOAD_JUMBO_FRAME;
else
git.droids-corp.org / dpdk.git / blobdiff