-/*-
- * BSD LICENSE
- *
- * Copyright (c) 2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016 Intel Corporation
*/
/**
#ifndef _PMD_IXGBE_H_
#define _PMD_IXGBE_H_
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
+
+/**
+ * Notify VF when PF link status changes.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *vf* invalid.
+ */
+int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf);
/**
* Set the VF MAC address.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
-int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
- struct ether_addr *mac_addr);
+int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
+ struct rte_ether_addr *mac_addr);
/**
* Enable/Disable VF VLAN anti spoofing.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf,
+ uint8_t on);
/**
* Enable/Disable VF MAC anti spoofing.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan insert
* The port identifier of the Ethernet device.
* @param vf
* ID specifying VF.
- * @param on
- * 1 - Enable VF's vlan insert.
- * 0 - Disable VF's vlan insert
+ * @param vlan_id
+ * 0 - Disable VF's vlan insert.
+ * n - Enable; n is inserted as the vlan id.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf,
+ uint16_t vlan_id);
/**
* Enable/Disable tx loopback
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on);
/**
* set all queues drop enable bit
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on);
/**
* set drop enable bit in the VF split rx control register
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan strip for all queues in a pool
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable MACsec offload.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param en
+ * 1 - Enable encryption (encrypt and add integrity signature).
+ * 0 - Disable encryption (only add integrity signature).
+ * @param rp
+ * 1 - Enable replay protection.
+ * 0 - Disable replay protection.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp);
+
+/**
+ * Disable MACsec offload.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_disable(uint16_t port);
+
+/**
+ * Configure Tx SC (Secure Connection).
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param mac
+ * The MAC address on the local side.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac);
+
+/**
+ * Configure Rx SC (Secure Connection).
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param mac
+ * The MAC address on the remote side.
+ * @param pi
+ * The PI (port identifier) on the remote side.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi);
+
+/**
+ * Enable Tx SA (Secure Association).
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param idx
+ * The SA to be enabled (0 or 1).
+ * @param an
+ * The association number on the local side.
+ * @param pn
+ * The packet number on the local side.
+ * @param key
+ * The key on the local side.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an,
+ uint32_t pn, uint8_t *key);
+
+/**
+ * Enable Rx SA (Secure Association).
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param idx
+ * The SA to be enabled (0 or 1)
+ * @param an
+ * The association number on the remote side.
+ * @param pn
+ * The packet number on the remote side.
+ * @param key
+ * The key on the remote side.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an,
+ uint32_t pn, uint8_t *key);
+
+/**
+* Set RX L2 Filtering mode of a VF of an Ethernet device.
+*
+* @param port
+* The port identifier of the Ethernet device.
+* @param vf
+* VF id.
+* @param rx_mask
+* The RX mode mask, which is one or more of accepting Untagged Packets,
+* packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
+* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
+* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
+* in rx_mode.
+* @param on
+* 1 - Enable a VF RX mode.
+* 0 - Disable a VF RX mode.
+* @return
+* - (0) if successful.
+* - (-ENOTSUP) if hardware doesn't support.
+* - (-ENODEV) if *port_id* invalid.
+* - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask,
+ uint8_t on);
+
+/**
+* Enable or disable a VF traffic receive of an Ethernet device.
+*
+* @param port
+* The port identifier of the Ethernet device.
+* @param vf
+* VF id.
+* @param on
+* 1 - Enable a VF traffic receive.
+* 0 - Disable a VF traffic receive.
+* @return
+* - (0) if successful.
+* - (-ENOTSUP) if hardware doesn't support.
+* - (-ENODEV) if *port_id* invalid.
+* - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on);
+
+/**
+* Enable or disable a VF traffic transmit of the Ethernet device.
+*
+* @param port
+* The port identifier of the Ethernet device.
+* @param vf
+* VF id.
+* @param on
+* 1 - Enable a VF traffic transmit.
+* 0 - Disable a VF traffic transmit.
+* @return
+* - (0) if successful.
+* - (-ENODEV) if *port_id* invalid.
+* - (-ENOTSUP) if hardware doesn't support.
+* - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on);
+
+/**
+* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
+* received VLAN packets tagged with a given VLAN Tag Identifier.
+*
+* @param port
+* The port identifier of the Ethernet device.
+* @param vlan
+* The VLAN Tag Identifier whose filtering must be enabled or disabled.
+* @param vf_mask
+* Bitmap listing which VFs participate in the VLAN filtering.
+* @param vlan_on
+* 1 - Enable VFs VLAN filtering.
+* 0 - Disable VFs VLAN filtering.
+* @return
+* - (0) if successful.
+* - (-ENOTSUP) if hardware doesn't support.
+* - (-ENODEV) if *port_id* invalid.
+* - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan,
+ uint64_t vf_mask, uint8_t vlan_on);
+
+/**
+ * Set the rate limitation for a vf on an Ethernet device.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param tx_rate
+ * The tx rate allocated from the total link speed for this VF id.
+ * @param q_msk
+ * The queue mask which need to set the rate.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf,
+ uint16_t tx_rate, uint64_t q_msk);
+
+/**
+ * Set all the TCs' bandwidth weight.
+ *
+ * The bw_weight means the percentage occupied by the TC.
+ * It can be taken as the relative min bandwidth setting.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param tc_num
+ * Number of TCs.
+ * @param bw_weight
+ * An array of relative bandwidth weight for all the TCs.
+ * The summary of the bw_weight should be 100.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port,
+ uint8_t tc_num,
+ uint8_t *bw_weight);
+
+
+/**
+ * Initialize bypass logic. This function needs to be called before
+ * executing any other bypass API.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_init(uint16_t port);
+
+/**
+ * Return bypass state.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param state
+ * The return bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state);
+
+/**
+ * Set bypass state
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param new_state
+ * The current bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state);
+
+/**
+ * Return bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The bypass state when given event occurred.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_show(uint16_t port,
+ uint32_t event,
+ uint32_t *state);
+
+/**
+ * Set bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The assigned state when given event occurs.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_store(uint16_t port,
+ uint32_t event,
+ uint32_t state);
+
+/**
+ * Set bypass watchdog timeout count.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param timeout
+ * The timeout to be set.
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout);
+
+/**
+ * Get bypass firmware version.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param ver
+ * The firmware version
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver);
+
+/**
+ * Return bypass watchdog timeout in seconds
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param wd_timeout
+ * The return watchdog timeout. "0" represents timer expired
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
+
+/**
+ * Reset bypass watchdog timer
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
+
+/**
+ * Acquire swfw semaphore lock for MDIO access
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_lock(uint16_t port);
+
+/**
+ * Release swfw semaphore lock used for MDIO access
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlock(uint16_t port);
+
+/**
+ * Read PHY register using MDIO without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param reg_addr
+ * 32 bit PHY Register
+ * @param dev_type
+ * Used to define device base address
+ * @param phy_data
+ * Pointer for reading PHY register data
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
+ uint32_t dev_type, uint16_t *phy_data);
+
+/**
+ * Write data to PHY register using without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param reg_addr
+ * 32 bit PHY Register
+ * @param dev_type
+ * Used to define device base address
+ * @param phy_data
+ * Data to write to PHY register
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
+ uint32_t dev_type, uint16_t phy_data);
/**
* Response sent back to ixgbe driver from user app after callback
uint16_t retval; /**< return value */
void *msg; /**< pointer to message */
};
+enum {
+ RTE_PMD_IXGBE_BYPASS_MODE_NONE,
+ RTE_PMD_IXGBE_BYPASS_MODE_NORMAL,
+ RTE_PMD_IXGBE_BYPASS_MODE_BYPASS,
+ RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE,
+ RTE_PMD_IXGBE_BYPASS_MODE_NUM,
+};
+
+#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x) \
+ ((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE && \
+ (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_PMD_IXGBE_BYPASS_EVENT_NONE,
+ RTE_PMD_IXGBE_BYPASS_EVENT_START,
+ RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START,
+ RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON,
+ RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF,
+ RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF,
+ RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT,
+ RTE_PMD_IXGBE_BYPASS_EVENT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x) \
+ ((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \
+ (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_PMD_IXGBE_BYPASS_TMT_OFF, /* timeout disabled. */
+ RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x) \
+ ((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \
+ ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \
+ (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
+
+/**
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param enable
+ * 0 to disable and nonzero to enable 'SBP' bit in FCTRL register
+ * to receive all packets
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
#endif /* _PMD_IXGBE_H_ */
git.droids-corp.org / dpdk.git / blobdiff