net: add rte prefix to ether structures

[dpdk.git] / drivers / net / ixgbe / rte_pmd_ixgbe.h

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 81b18f8..84c6884 100644 (file)
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -1,33 +1,5 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright (c) 2016 Intel Corporation. All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016 Intel Corporation
  */
 
 /**
@@ -39,7 +11,7 @@
 #ifndef _PMD_IXGBE_H_
 #define _PMD_IXGBE_H_
 
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
 
 /**
  * Notify VF when PF link status changes.
@@ -70,7 +42,7 @@ int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf);
  *   - (-EINVAL) if *vf* or *mac_addr* is invalid.
  */
 int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
-               struct ether_addr *mac_addr);
+               struct rte_ether_addr *mac_addr);
 
 /**
  * Enable/Disable VF VLAN anti spoofing.
@@ -601,6 +573,77 @@ int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
  */
 int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
 
+/**
+ * Acquire swfw semaphore lock for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_lock(uint16_t port);
+
+/**
+ * Release swfw semaphore lock used for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlock(uint16_t port);
+
+/**
+ * Read PHY register using MDIO without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Pointer for reading PHY register data
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
+                                uint32_t dev_type, uint16_t *phy_data);
+
+/**
+ * Write data to PHY register using without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Data to write to PHY register
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
+                                 uint32_t dev_type, uint16_t phy_data);
 
 /**
  * Response sent back to ixgbe driver from user app after callback
@@ -665,4 +708,17 @@ enum {
        ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF &&  \
        (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
 
+/**
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param enable
+ *    0 to disable and nonzero to enable 'SBP' bit in FCTRL register
+ *    to receive all packets
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
 #endif /* _PMD_IXGBE_H_ */