-# BSD LICENSE
-#
+# SPDX-License-Identifier: BSD-3-Clause
# Copyright 2015 6WIND S.A.
-# Copyright 2015 Mellanox.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of 6WIND S.A. nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# Copyright 2015 Mellanox Technologies, Ltd
include $(RTE_SDK)/mk/rte.vars.mk
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_rxq.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_txq.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_rxtx.c
+ifneq ($(filter y,$(CONFIG_RTE_ARCH_X86_64) \
+ $(CONFIG_RTE_ARCH_PPC_64) \
+ $(CONFIG_RTE_ARCH_ARM64)),)
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_rxtx_vec.c
+endif
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_trigger.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_ethdev.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mac.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_vlan.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_stats.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_rss.c
-SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_fdir.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mr.c
-
-# Dependencies.
-DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += lib/librte_ether
-DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += lib/librte_mbuf
-DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += lib/librte_eal
-DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += lib/librte_mempool
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow_meter.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow_dv.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow_verbs.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mp.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_nl.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_utils.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c
# Basic CFLAGS.
CFLAGS += -O3
-CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -std=c11 -Wall -Wextra
CFLAGS += -g
-CFLAGS += -I.
+CFLAGS += -I$(RTE_SDK)/drivers/common/mlx5
+CFLAGS += -I$(RTE_SDK)/drivers/net/mlx5
+CFLAGS += -I$(BUILDDIR)/drivers/common/mlx5
CFLAGS += -D_BSD_SOURCE
CFLAGS += -D_DEFAULT_SOURCE
CFLAGS += -D_XOPEN_SOURCE=600
CFLAGS += $(WERROR_FLAGS)
CFLAGS += -Wno-strict-prototypes
-LDLIBS += -libverbs
+LDLIBS += -lrte_common_mlx5
+LDLIBS += -lm
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
+LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
+LDLIBS += -lrte_bus_pci
# A few warnings cannot be avoided in external headers.
CFLAGS += -Wno-error=cast-qual
EXPORT_MAP := rte_pmd_mlx5_version.map
-LIBABIVER := 1
+
+# memseg walk is not part of stable API
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# DEBUG which is usually provided on the command-line may enable
# CONFIG_RTE_LIBRTE_MLX5_DEBUG.
# User-defined CFLAGS.
ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DEBUG),y)
-CFLAGS += -pedantic -UNDEBUG -DPEDANTIC
+CFLAGS += -pedantic -UNDEBUG
+ifneq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
+CFLAGS += -DPEDANTIC
+endif
+AUTO_CONFIG_CFLAGS += -Wno-pedantic
else
CFLAGS += -DNDEBUG -UPEDANTIC
endif
-ifdef CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE
-CFLAGS += -DMLX5_PMD_MAX_INLINE=$(CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE)
-endif
-
-ifdef CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE
-CFLAGS += -DMLX5_PMD_TX_MP_CACHE=$(CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE)
-endif
-
include $(RTE_SDK)/mk/rte.lib.mk
-# Generate and clean-up mlx5_autoconf.h.
-
-export CC CFLAGS CPPFLAGS EXTRA_CFLAGS EXTRA_CPPFLAGS
-export AUTO_CONFIG_CFLAGS = -Wno-error
-
-ifndef V
-AUTOCONF_OUTPUT := >/dev/null
-endif
-
-mlx5_autoconf.h.new: FORCE
-
-mlx5_autoconf.h.new: $(RTE_SDK)/scripts/auto-config-h.sh
- $Q $(RM) -f -- '$@'
- $Q sh -- '$<' '$@' \
- HAVE_EXP_QUERY_DEVICE \
- infiniband/verbs.h \
- type 'struct ibv_exp_device_attr' $(AUTOCONF_OUTPUT)
- $Q sh -- '$<' '$@' \
- HAVE_FLOW_SPEC_IPV6 \
- infiniband/verbs.h \
- type 'struct ibv_exp_flow_spec_ipv6' $(AUTOCONF_OUTPUT)
- $Q sh -- '$<' '$@' \
- HAVE_EXP_QP_BURST_CREATE_ENABLE_MULTI_PACKET_SEND_WR \
- infiniband/verbs.h \
- enum IBV_EXP_QP_BURST_CREATE_ENABLE_MULTI_PACKET_SEND_WR \
- $(AUTOCONF_OUTPUT)
- $Q sh -- '$<' '$@' \
- HAVE_EXP_DEVICE_ATTR_VLAN_OFFLOADS \
- infiniband/verbs.h \
- enum IBV_EXP_DEVICE_ATTR_VLAN_OFFLOADS \
- $(AUTOCONF_OUTPUT)
- $Q sh -- '$<' '$@' \
- HAVE_EXP_CQ_RX_TCP_PACKET \
- infiniband/verbs.h \
- enum IBV_EXP_CQ_RX_TCP_PACKET \
- $(AUTOCONF_OUTPUT)
- $Q sh -- '$<' '$@' \
- HAVE_VERBS_FCS \
- infiniband/verbs.h \
- enum IBV_EXP_CREATE_WQ_FLAG_SCATTER_FCS \
- $(AUTOCONF_OUTPUT)
- $Q sh -- '$<' '$@' \
- HAVE_VERBS_RX_END_PADDING \
- infiniband/verbs.h \
- enum IBV_EXP_CREATE_WQ_FLAG_RX_END_PADDING \
- $(AUTOCONF_OUTPUT)
- $Q sh -- '$<' '$@' \
- HAVE_VERBS_VLAN_INSERTION \
- infiniband/verbs.h \
- enum IBV_EXP_RECEIVE_WQ_CVLAN_INSERTION \
- $(AUTOCONF_OUTPUT)
-
-# Create mlx5_autoconf.h or update it in case it differs from the new one.
-
-mlx5_autoconf.h: mlx5_autoconf.h.new
- $Q [ -f '$@' ] && \
- cmp '$<' '$@' $(AUTOCONF_OUTPUT) || \
- mv '$<' '$@'
-
-$(SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD):.c=.o): mlx5_autoconf.h
-
-clean_mlx5: FORCE
- $Q rm -f -- mlx5_autoconf.h mlx5_autoconf.h.new
-
-clean: clean_mlx5
git.droids-corp.org / dpdk.git / blobdiff