prf->obj = NULL;
}
+/*
+ * Allocate Rx and Tx UARs in robust fashion.
+ * This routine handles the following UAR allocation issues:
+ *
+ * - tries to allocate the UAR with the most appropriate memory
+ * mapping type from the ones supported by the host
+ *
+ * - tries to allocate the UAR with non-NULL base address
+ * OFED 5.0.x and Upstream rdma_core before v29 returned the NULL as
+ * UAR base address if UAR was not the first object in the UAR page.
+ * It caused the PMD failure and we should try to get another UAR
+ * till we get the first one with non-NULL base address returned.
+ */
+static int
+mlx5_alloc_rxtx_uars(struct mlx5_dev_ctx_shared *sh,
+ const struct mlx5_dev_config *config)
+{
+ uint32_t uar_mapping, retry;
+ int err = 0;
+
+ for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
+#ifdef MLX5DV_UAR_ALLOC_TYPE_NC
+ /* Control the mapping type according to the settings. */
+ uar_mapping = (config->dbnc == MLX5_TXDB_NCACHED) ?
+ MLX5DV_UAR_ALLOC_TYPE_NC :
+ MLX5DV_UAR_ALLOC_TYPE_BF;
+#else
+ RTE_SET_USED(config);
+ /*
+ * It seems we have no way to control the memory mapping type
+ * for the UAR, the default "Write-Combining" type is supposed.
+ * The UAR initialization on queue creation queries the
+ * actual mapping type done by Verbs/kernel and setups the
+ * PMD datapath accordingly.
+ */
+ uar_mapping = 0;
+#endif
+ sh->tx_uar = mlx5_glue->devx_alloc_uar(sh->ctx, uar_mapping);
+#ifdef MLX5DV_UAR_ALLOC_TYPE_NC
+ if (!sh->tx_uar &&
+ uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
+ if (config->dbnc == MLX5_TXDB_CACHED ||
+ config->dbnc == MLX5_TXDB_HEURISTIC)
+ DRV_LOG(WARNING, "Devarg tx_db_nc setting "
+ "is not supported by DevX");
+ /*
+ * In some environments like virtual machine
+ * the Write Combining mapped might be not supported
+ * and UAR allocation fails. We try "Non-Cached"
+ * mapping for the case. The tx_burst routines take
+ * the UAR mapping type into account on UAR setup
+ * on queue creation.
+ */
+ DRV_LOG(WARNING, "Failed to allocate Tx DevX UAR (BF)");
+ uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
+ sh->tx_uar = mlx5_glue->devx_alloc_uar
+ (sh->ctx, uar_mapping);
+ } else if (!sh->tx_uar &&
+ uar_mapping == MLX5DV_UAR_ALLOC_TYPE_NC) {
+ if (config->dbnc == MLX5_TXDB_NCACHED)
+ DRV_LOG(WARNING, "Devarg tx_db_nc settings "
+ "is not supported by DevX");
+ /*
+ * If Verbs/kernel does not support "Non-Cached"
+ * try the "Write-Combining".
+ */
+ DRV_LOG(WARNING, "Failed to allocate Tx DevX UAR (NC)");
+ uar_mapping = MLX5DV_UAR_ALLOC_TYPE_BF;
+ sh->tx_uar = mlx5_glue->devx_alloc_uar
+ (sh->ctx, uar_mapping);
+ }
+#endif
+ if (!sh->tx_uar) {
+ DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (BF/NC)");
+ err = ENOMEM;
+ goto exit;
+ }
+ if (sh->tx_uar->base_addr)
+ break;
+ /*
+ * The UARs are allocated by rdma_core within the
+ * IB device context, on context closure all UARs
+ * will be freed, should be no memory/object leakage.
+ */
+ DRV_LOG(WARNING, "Retrying to allocate Tx DevX UAR");
+ sh->tx_uar = NULL;
+ }
+ /* Check whether we finally succeeded with valid UAR allocation. */
+ if (!sh->tx_uar) {
+ DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (NULL base)");
+ err = ENOMEM;
+ goto exit;
+ }
+ for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
+ uar_mapping = 0;
+ sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
+ (sh->ctx, uar_mapping);
+#ifdef MLX5DV_UAR_ALLOC_TYPE_NC
+ if (!sh->devx_rx_uar &&
+ uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
+ /*
+ * Rx UAR is used to control interrupts only,
+ * should be no datapath noticeable impact,
+ * can try "Non-Cached" mapping safely.
+ */
+ DRV_LOG(WARNING, "Failed to allocate Rx DevX UAR (BF)");
+ uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
+ sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
+ (sh->ctx, uar_mapping);
+ }
+#endif
+ if (!sh->devx_rx_uar) {
+ DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (BF/NC)");
+ err = ENOMEM;
+ goto exit;
+ }
+ if (sh->devx_rx_uar->base_addr)
+ break;
+ /*
+ * The UARs are allocated by rdma_core within the
+ * IB device context, on context closure all UARs
+ * will be freed, should be no memory/object leakage.
+ */
+ DRV_LOG(WARNING, "Retrying to allocate Rx DevX UAR");
+ sh->devx_rx_uar = NULL;
+ }
+ /* Check whether we finally succeeded with valid UAR allocation. */
+ if (!sh->devx_rx_uar) {
+ DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (NULL base)");
+ err = ENOMEM;
+ }
+exit:
+ return err;
+}
+
/**
* Allocate shared device context. If there is multiport device the
* master and representors will share this context, if there is single
err = ENOMEM;
goto error;
}
- sh->tx_uar = mlx5_glue->devx_alloc_uar(sh->ctx, 0);
- if (!sh->tx_uar) {
- DRV_LOG(ERR, "Failed to allocate DevX UAR.");
- err = ENOMEM;
- goto error;
- }
- sh->devx_rx_uar = mlx5_glue->devx_alloc_uar(sh->ctx, 0);
- if (!sh->devx_rx_uar) {
- DRV_LOG(ERR, "Failed to allocate Rx DevX UAR.");
- err = ENOMEM;
+ err = mlx5_alloc_rxtx_uars(sh, config);
+ if (err)
goto error;
- }
+ MLX5_ASSERT(sh->tx_uar && sh->tx_uar->base_addr);
+ MLX5_ASSERT(sh->devx_rx_uar && sh->devx_rx_uar->base_addr);
}
sh->flow_id_pool = mlx5_flow_id_pool_alloc
((1 << HAIRPIN_FLOW_ID_BITS) - 1);
pthread_mutex_destroy(&sh->txpp.mutex);
pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
MLX5_ASSERT(sh);
- if (sh->cnt_id_tbl) {
+ if (sh->cnt_id_tbl)
mlx5_l3t_destroy(sh->cnt_id_tbl);
- sh->cnt_id_tbl = NULL;
- }
- if (sh->tx_uar) {
- mlx5_glue->devx_free_uar(sh->tx_uar);
- sh->tx_uar = NULL;
- }
if (sh->tis)
claim_zero(mlx5_devx_cmd_destroy(sh->tis));
if (sh->td)
claim_zero(mlx5_devx_cmd_destroy(sh->td));
if (sh->devx_rx_uar)
mlx5_glue->devx_free_uar(sh->devx_rx_uar);
+ if (sh->tx_uar)
+ mlx5_glue->devx_free_uar(sh->tx_uar);
if (sh->pd)
claim_zero(mlx5_glue->dealloc_pd(sh->pd));
if (sh->ctx)
git.droids-corp.org / dpdk.git / blobdiff