#include <stddef.h>
#include <unistd.h>
#include <string.h>
-#include <assert.h>
-#include <dlfcn.h>
#include <stdint.h>
#include <stdlib.h>
#include <errno.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_common.h>
-#include <rte_config.h>
#include <rte_kvargs.h>
#include <rte_rwlock.h>
#include <rte_spinlock.h>
#include <rte_string_fns.h>
#include <rte_alarm.h>
+#include <mlx5_glue.h>
+#include <mlx5_devx_cmds.h>
+#include <mlx5_common.h>
+
+#include "mlx5_defs.h"
#include "mlx5.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
-#include "mlx5_defs.h"
-#include "mlx5_glue.h"
#include "mlx5_mr.h"
#include "mlx5_flow.h"
+#include "rte_pmd_mlx5.h"
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
/* Device parameter to enable multi-packet send WQEs. */
#define MLX5_TXQ_MPW_EN "txq_mpw_en"
+/*
+ * Device parameter to force doorbell register mapping
+ * to non-cahed region eliminating the extra write memory barrier.
+ */
+#define MLX5_TX_DB_NC "tx_db_nc"
+
/*
* Device parameter to include 2 dsegs in the title WQEBB.
* Deprecated, ignored.
/* Activate DV flow steering. */
#define MLX5_DV_FLOW_EN "dv_flow_en"
+/* Enable extensive flow metadata support. */
+#define MLX5_DV_XMETA_EN "dv_xmeta_en"
+
/* Activate Netlink support in VF mode. */
#define MLX5_VF_NL_EN "vf_nl_en"
uint32_t ifindex; /**< Network interface index. */
uint32_t max_port; /**< IB device maximal port index. */
uint32_t ibv_port; /**< IB device physical port index. */
+ int pf_bond; /**< bonding device PF index. < 0 - no bonding */
struct mlx5_switch_info info; /**< Switch information. */
struct ibv_device *ibv_dev; /**< Associated IB device. */
struct rte_eth_dev *eth_dev; /**< Associated Ethernet device. */
static LIST_HEAD(, mlx5_ibv_shared) mlx5_ibv_list = LIST_HEAD_INITIALIZER();
static pthread_mutex_t mlx5_ibv_list_mutex = PTHREAD_MUTEX_INITIALIZER;
+#define MLX5_FLOW_MIN_ID_POOL_SIZE 512
+#define MLX5_ID_GENERATION_ARRAY_FACTOR 16
+
+#define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 4096
+#define MLX5_TAGS_HLIST_ARRAY_SIZE 8192
+
+/**
+ * Allocate ID pool structure.
+ *
+ * @param[in] max_id
+ * The maximum id can be allocated from the pool.
+ *
+ * @return
+ * Pointer to pool object, NULL value otherwise.
+ */
+struct mlx5_flow_id_pool *
+mlx5_flow_id_pool_alloc(uint32_t max_id)
+{
+ struct mlx5_flow_id_pool *pool;
+ void *mem;
+
+ pool = rte_zmalloc("id pool allocation", sizeof(*pool),
+ RTE_CACHE_LINE_SIZE);
+ if (!pool) {
+ DRV_LOG(ERR, "can't allocate id pool");
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ mem = rte_zmalloc("", MLX5_FLOW_MIN_ID_POOL_SIZE * sizeof(uint32_t),
+ RTE_CACHE_LINE_SIZE);
+ if (!mem) {
+ DRV_LOG(ERR, "can't allocate mem for id pool");
+ rte_errno = ENOMEM;
+ goto error;
+ }
+ pool->free_arr = mem;
+ pool->curr = pool->free_arr;
+ pool->last = pool->free_arr + MLX5_FLOW_MIN_ID_POOL_SIZE;
+ pool->base_index = 0;
+ pool->max_id = max_id;
+ return pool;
+error:
+ rte_free(pool);
+ return NULL;
+}
+
+/**
+ * Release ID pool structure.
+ *
+ * @param[in] pool
+ * Pointer to flow id pool object to free.
+ */
+void
+mlx5_flow_id_pool_release(struct mlx5_flow_id_pool *pool)
+{
+ rte_free(pool->free_arr);
+ rte_free(pool);
+}
+
+/**
+ * Generate ID.
+ *
+ * @param[in] pool
+ * Pointer to flow id pool.
+ * @param[out] id
+ * The generated ID.
+ *
+ * @return
+ * 0 on success, error value otherwise.
+ */
+uint32_t
+mlx5_flow_id_get(struct mlx5_flow_id_pool *pool, uint32_t *id)
+{
+ if (pool->curr == pool->free_arr) {
+ if (pool->base_index == pool->max_id) {
+ rte_errno = ENOMEM;
+ DRV_LOG(ERR, "no free id");
+ return -rte_errno;
+ }
+ *id = ++pool->base_index;
+ return 0;
+ }
+ *id = *(--pool->curr);
+ return 0;
+}
+
+/**
+ * Release ID.
+ *
+ * @param[in] pool
+ * Pointer to flow id pool.
+ * @param[out] id
+ * The generated ID.
+ *
+ * @return
+ * 0 on success, error value otherwise.
+ */
+uint32_t
+mlx5_flow_id_release(struct mlx5_flow_id_pool *pool, uint32_t id)
+{
+ uint32_t size;
+ uint32_t size2;
+ void *mem;
+
+ if (pool->curr == pool->last) {
+ size = pool->curr - pool->free_arr;
+ size2 = size * MLX5_ID_GENERATION_ARRAY_FACTOR;
+ MLX5_ASSERT(size2 > size);
+ mem = rte_malloc("", size2 * sizeof(uint32_t), 0);
+ if (!mem) {
+ DRV_LOG(ERR, "can't allocate mem for id pool");
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ memcpy(mem, pool->free_arr, size * sizeof(uint32_t));
+ rte_free(pool->free_arr);
+ pool->free_arr = mem;
+ pool->curr = pool->free_arr + size;
+ pool->last = pool->free_arr + size2;
+ }
+ *pool->curr = id;
+ pool->curr++;
+ return 0;
+}
+
/**
* Initialize the counters management structure.
*
}
#endif /* HAVE_IBV_FLOW_DV_SUPPORT */
+static int
+mlx5_config_doorbell_mapping_env(const struct mlx5_dev_config *config)
+{
+ char *env;
+ int value;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ /* Get environment variable to store. */
+ env = getenv(MLX5_SHUT_UP_BF);
+ value = env ? !!strcmp(env, "0") : MLX5_ARG_UNSET;
+ if (config->dbnc == MLX5_ARG_UNSET)
+ setenv(MLX5_SHUT_UP_BF, MLX5_SHUT_UP_BF_DEFAULT, 1);
+ else
+ setenv(MLX5_SHUT_UP_BF,
+ config->dbnc == MLX5_TXDB_NCACHED ? "1" : "0", 1);
+ return value;
+}
+
+static void
+mlx5_restore_doorbell_mapping_env(int value)
+{
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ /* Restore the original environment variable state. */
+ if (value == MLX5_ARG_UNSET)
+ unsetenv(MLX5_SHUT_UP_BF);
+ else
+ setenv(MLX5_SHUT_UP_BF, value ? "1" : "0", 1);
+}
+
/**
* Allocate shared IB device context. If there is multiport device the
* master and representors will share this context, if there is single
*
* @param[in] spawn
* Pointer to the IB device attributes (name, port, etc).
+ * @param[in] config
+ * Pointer to device configuration structure.
*
* @return
* Pointer to mlx5_ibv_shared object on success,
* otherwise NULL and rte_errno is set.
*/
static struct mlx5_ibv_shared *
-mlx5_alloc_shared_ibctx(const struct mlx5_dev_spawn_data *spawn)
+mlx5_alloc_shared_ibctx(const struct mlx5_dev_spawn_data *spawn,
+ const struct mlx5_dev_config *config)
{
struct mlx5_ibv_shared *sh;
+ int dbmap_env;
int err = 0;
uint32_t i;
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ struct mlx5_devx_tis_attr tis_attr = { 0 };
+#endif
- assert(spawn);
+ MLX5_ASSERT(spawn);
/* Secondary process should not create the shared context. */
- assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
pthread_mutex_lock(&mlx5_ibv_list_mutex);
/* Search for IB context by device name. */
LIST_FOREACH(sh, &mlx5_ibv_list, next) {
}
}
/* No device found, we have to create new shared context. */
- assert(spawn->max_port);
+ MLX5_ASSERT(spawn->max_port);
sh = rte_zmalloc("ethdev shared ib context",
sizeof(struct mlx5_ibv_shared) +
spawn->max_port *
rte_errno = ENOMEM;
goto exit;
}
+ /*
+ * Configure environment variable "MLX5_BF_SHUT_UP"
+ * before the device creation. The rdma_core library
+ * checks the variable at device creation and
+ * stores the result internally.
+ */
+ dbmap_env = mlx5_config_doorbell_mapping_env(config);
/* Try to open IB device with DV first, then usual Verbs. */
errno = 0;
sh->ctx = mlx5_glue->dv_open_device(spawn->ibv_dev);
if (sh->ctx) {
sh->devx = 1;
DRV_LOG(DEBUG, "DevX is supported");
+ /* The device is created, no need for environment. */
+ mlx5_restore_doorbell_mapping_env(dbmap_env);
} else {
+ /* The environment variable is still configured. */
sh->ctx = mlx5_glue->open_device(spawn->ibv_dev);
- if (!sh->ctx) {
- err = errno ? errno : ENODEV;
+ err = errno ? errno : ENODEV;
+ /*
+ * The environment variable is not needed anymore,
+ * all device creation attempts are completed.
+ */
+ mlx5_restore_doorbell_mapping_env(dbmap_env);
+ if (!sh->ctx)
goto error;
- }
DRV_LOG(DEBUG, "DevX is NOT supported");
}
err = mlx5_glue->query_device_ex(sh->ctx, NULL, &sh->device_attr);
sizeof(sh->ibdev_name));
strncpy(sh->ibdev_path, sh->ctx->device->ibdev_path,
sizeof(sh->ibdev_path));
- sh->pci_dev = spawn->pci_dev;
pthread_mutex_init(&sh->intr_mutex, NULL);
/*
* Setting port_id to max unallowed value means
* there is no interrupt subhandler installed for
* the given port index i.
*/
- for (i = 0; i < sh->max_port; i++)
+ for (i = 0; i < sh->max_port; i++) {
sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
+ sh->port[i].devx_ih_port_id = RTE_MAX_ETHPORTS;
+ }
sh->pd = mlx5_glue->alloc_pd(sh->ctx);
if (sh->pd == NULL) {
DRV_LOG(ERR, "PD allocation failure");
goto error;
}
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
- err = mlx5_get_pdn(sh->pd, &sh->pdn);
- if (err) {
- DRV_LOG(ERR, "Fail to extract pdn from PD");
+ if (sh->devx) {
+ err = mlx5_get_pdn(sh->pd, &sh->pdn);
+ if (err) {
+ DRV_LOG(ERR, "Fail to extract pdn from PD");
+ goto error;
+ }
+ sh->td = mlx5_devx_cmd_create_td(sh->ctx);
+ if (!sh->td) {
+ DRV_LOG(ERR, "TD allocation failure");
+ err = ENOMEM;
+ goto error;
+ }
+ tis_attr.transport_domain = sh->td->id;
+ sh->tis = mlx5_devx_cmd_create_tis(sh->ctx, &tis_attr);
+ if (!sh->tis) {
+ DRV_LOG(ERR, "TIS allocation failure");
+ err = ENOMEM;
+ goto error;
+ }
+ }
+ sh->flow_id_pool = mlx5_flow_id_pool_alloc(UINT32_MAX);
+ if (!sh->flow_id_pool) {
+ DRV_LOG(ERR, "can't create flow id pool");
+ err = ENOMEM;
goto error;
}
#endif /* HAVE_IBV_FLOW_DV_SUPPORT */
*/
err = mlx5_mr_btree_init(&sh->mr.cache,
MLX5_MR_BTREE_CACHE_N * 2,
- sh->pci_dev->device.numa_node);
+ spawn->pci_dev->device.numa_node);
if (err) {
err = rte_errno;
goto error;
return sh;
error:
pthread_mutex_unlock(&mlx5_ibv_list_mutex);
- assert(sh);
+ MLX5_ASSERT(sh);
+ if (sh->tis)
+ claim_zero(mlx5_devx_cmd_destroy(sh->tis));
+ if (sh->td)
+ claim_zero(mlx5_devx_cmd_destroy(sh->td));
if (sh->pd)
claim_zero(mlx5_glue->dealloc_pd(sh->pd));
if (sh->ctx)
claim_zero(mlx5_glue->close_device(sh->ctx));
+ if (sh->flow_id_pool)
+ mlx5_flow_id_pool_release(sh->flow_id_pool);
rte_free(sh);
- assert(err > 0);
+ MLX5_ASSERT(err > 0);
rte_errno = err;
return NULL;
}
mlx5_free_shared_ibctx(struct mlx5_ibv_shared *sh)
{
pthread_mutex_lock(&mlx5_ibv_list_mutex);
-#ifndef NDEBUG
+#ifdef RTE_LIBRTE_MLX5_DEBUG
/* Check the object presence in the list. */
struct mlx5_ibv_shared *lctx;
LIST_FOREACH(lctx, &mlx5_ibv_list, next)
if (lctx == sh)
break;
- assert(lctx);
+ MLX5_ASSERT(lctx);
if (lctx != sh) {
DRV_LOG(ERR, "Freeing non-existing shared IB context");
goto exit;
}
#endif
- assert(sh);
- assert(sh->refcnt);
+ MLX5_ASSERT(sh);
+ MLX5_ASSERT(sh->refcnt);
/* Secondary process should not free the shared context. */
- assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
if (--sh->refcnt)
goto exit;
- /* Release created Memory Regions. */
- mlx5_mr_release(sh);
/* Remove from memory callback device list. */
rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
LIST_REMOVE(sh, mem_event_cb);
rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
+ /* Release created Memory Regions. */
+ mlx5_mr_release(sh);
/* Remove context from the global device list. */
LIST_REMOVE(sh, next);
/*
* Only primary process handles async device events.
**/
mlx5_flow_counters_mng_close(sh);
- assert(!sh->intr_cnt);
+ MLX5_ASSERT(!sh->intr_cnt);
if (sh->intr_cnt)
mlx5_intr_callback_unregister
(&sh->intr_handle, mlx5_dev_interrupt_handler, sh);
+#ifdef HAVE_MLX5_DEVX_ASYNC_SUPPORT
+ if (sh->devx_intr_cnt) {
+ if (sh->intr_handle_devx.fd)
+ rte_intr_callback_unregister(&sh->intr_handle_devx,
+ mlx5_dev_interrupt_handler_devx, sh);
+ if (sh->devx_comp)
+ mlx5dv_devx_destroy_cmd_comp(sh->devx_comp);
+ }
+#endif
pthread_mutex_destroy(&sh->intr_mutex);
if (sh->pd)
claim_zero(mlx5_glue->dealloc_pd(sh->pd));
+ if (sh->tis)
+ claim_zero(mlx5_devx_cmd_destroy(sh->tis));
+ if (sh->td)
+ claim_zero(mlx5_devx_cmd_destroy(sh->td));
if (sh->ctx)
claim_zero(mlx5_glue->close_device(sh->ctx));
+ if (sh->flow_id_pool)
+ mlx5_flow_id_pool_release(sh->flow_id_pool);
rte_free(sh);
exit:
pthread_mutex_unlock(&mlx5_ibv_list_mutex);
}
+/**
+ * Destroy table hash list and all the root entries per domain.
+ *
+ * @param[in] priv
+ * Pointer to the private device data structure.
+ */
+static void
+mlx5_free_table_hash_list(struct mlx5_priv *priv)
+{
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_tbl_data_entry *tbl_data;
+ union mlx5_flow_tbl_key table_key = {
+ {
+ .table_id = 0,
+ .reserved = 0,
+ .domain = 0,
+ .direction = 0,
+ }
+ };
+ struct mlx5_hlist_entry *pos;
+
+ if (!sh->flow_tbls)
+ return;
+ pos = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64);
+ if (pos) {
+ tbl_data = container_of(pos, struct mlx5_flow_tbl_data_entry,
+ entry);
+ MLX5_ASSERT(tbl_data);
+ mlx5_hlist_remove(sh->flow_tbls, pos);
+ rte_free(tbl_data);
+ }
+ table_key.direction = 1;
+ pos = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64);
+ if (pos) {
+ tbl_data = container_of(pos, struct mlx5_flow_tbl_data_entry,
+ entry);
+ MLX5_ASSERT(tbl_data);
+ mlx5_hlist_remove(sh->flow_tbls, pos);
+ rte_free(tbl_data);
+ }
+ table_key.direction = 0;
+ table_key.domain = 1;
+ pos = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64);
+ if (pos) {
+ tbl_data = container_of(pos, struct mlx5_flow_tbl_data_entry,
+ entry);
+ MLX5_ASSERT(tbl_data);
+ mlx5_hlist_remove(sh->flow_tbls, pos);
+ rte_free(tbl_data);
+ }
+ mlx5_hlist_destroy(sh->flow_tbls, NULL, NULL);
+}
+
+/**
+ * Initialize flow table hash list and create the root tables entry
+ * for each domain.
+ *
+ * @param[in] priv
+ * Pointer to the private device data structure.
+ *
+ * @return
+ * Zero on success, positive error code otherwise.
+ */
+static int
+mlx5_alloc_table_hash_list(struct mlx5_priv *priv)
+{
+ struct mlx5_ibv_shared *sh = priv->sh;
+ char s[MLX5_HLIST_NAMESIZE];
+ int err = 0;
+
+ MLX5_ASSERT(sh);
+ snprintf(s, sizeof(s), "%s_flow_table", priv->sh->ibdev_name);
+ sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE);
+ if (!sh->flow_tbls) {
+ DRV_LOG(ERR, "flow tables with hash creation failed.\n");
+ err = ENOMEM;
+ return err;
+ }
+#ifndef HAVE_MLX5DV_DR
+ /*
+ * In case we have not DR support, the zero tables should be created
+ * because DV expect to see them even if they cannot be created by
+ * RDMA-CORE.
+ */
+ union mlx5_flow_tbl_key table_key = {
+ {
+ .table_id = 0,
+ .reserved = 0,
+ .domain = 0,
+ .direction = 0,
+ }
+ };
+ struct mlx5_flow_tbl_data_entry *tbl_data = rte_zmalloc(NULL,
+ sizeof(*tbl_data), 0);
+
+ if (!tbl_data) {
+ err = ENOMEM;
+ goto error;
+ }
+ tbl_data->entry.key = table_key.v64;
+ err = mlx5_hlist_insert(sh->flow_tbls, &tbl_data->entry);
+ if (err)
+ goto error;
+ rte_atomic32_init(&tbl_data->tbl.refcnt);
+ rte_atomic32_inc(&tbl_data->tbl.refcnt);
+ table_key.direction = 1;
+ tbl_data = rte_zmalloc(NULL, sizeof(*tbl_data), 0);
+ if (!tbl_data) {
+ err = ENOMEM;
+ goto error;
+ }
+ tbl_data->entry.key = table_key.v64;
+ err = mlx5_hlist_insert(sh->flow_tbls, &tbl_data->entry);
+ if (err)
+ goto error;
+ rte_atomic32_init(&tbl_data->tbl.refcnt);
+ rte_atomic32_inc(&tbl_data->tbl.refcnt);
+ table_key.direction = 0;
+ table_key.domain = 1;
+ tbl_data = rte_zmalloc(NULL, sizeof(*tbl_data), 0);
+ if (!tbl_data) {
+ err = ENOMEM;
+ goto error;
+ }
+ tbl_data->entry.key = table_key.v64;
+ err = mlx5_hlist_insert(sh->flow_tbls, &tbl_data->entry);
+ if (err)
+ goto error;
+ rte_atomic32_init(&tbl_data->tbl.refcnt);
+ rte_atomic32_inc(&tbl_data->tbl.refcnt);
+ return err;
+error:
+ mlx5_free_table_hash_list(priv);
+#endif /* HAVE_MLX5DV_DR */
+ return err;
+}
+
/**
* Initialize DR related data within private structure.
* Routine checks the reference counter and does actual
static int
mlx5_alloc_shared_dr(struct mlx5_priv *priv)
{
-#ifdef HAVE_MLX5DV_DR
struct mlx5_ibv_shared *sh = priv->sh;
+ char s[MLX5_HLIST_NAMESIZE];
int err = 0;
+
+ if (!sh->flow_tbls)
+ err = mlx5_alloc_table_hash_list(priv);
+ else
+ DRV_LOG(DEBUG, "sh->flow_tbls[%p] already created, reuse\n",
+ (void *)sh->flow_tbls);
+ if (err)
+ return err;
+ /* Create tags hash list table. */
+ snprintf(s, sizeof(s), "%s_tags", sh->ibdev_name);
+ sh->tag_table = mlx5_hlist_create(s, MLX5_TAGS_HLIST_ARRAY_SIZE);
+ if (!sh->tag_table) {
+ DRV_LOG(ERR, "tags with hash creation failed.\n");
+ err = ENOMEM;
+ goto error;
+ }
+#ifdef HAVE_MLX5DV_DR
void *domain;
- assert(sh);
if (sh->dv_refcnt) {
/* Shared DV/DR structures is already initialized. */
sh->dv_refcnt++;
}
#endif
sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan();
+#endif /* HAVE_MLX5DV_DR */
sh->dv_refcnt++;
priv->dr_shared = 1;
return 0;
-
error:
- /* Rollback the created objects. */
+ /* Rollback the created objects. */
if (sh->rx_domain) {
mlx5_glue->dr_destroy_domain(sh->rx_domain);
sh->rx_domain = NULL;
mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
sh->pop_vlan_action = NULL;
}
+ if (sh->tag_table) {
+ /* tags should be destroyed with flow before. */
+ mlx5_hlist_destroy(sh->tag_table, NULL, NULL);
+ sh->tag_table = NULL;
+ }
+ mlx5_free_table_hash_list(priv);
return err;
-#else
- (void)priv;
- return 0;
-#endif
}
/**
static void
mlx5_free_shared_dr(struct mlx5_priv *priv)
{
-#ifdef HAVE_MLX5DV_DR
struct mlx5_ibv_shared *sh;
if (!priv->dr_shared)
return;
priv->dr_shared = 0;
sh = priv->sh;
- assert(sh);
- assert(sh->dv_refcnt);
+ MLX5_ASSERT(sh);
+#ifdef HAVE_MLX5DV_DR
+ MLX5_ASSERT(sh->dv_refcnt);
if (sh->dv_refcnt && --sh->dv_refcnt)
return;
if (sh->rx_domain) {
sh->pop_vlan_action = NULL;
}
pthread_mutex_destroy(&sh->dv_mutex);
-#else
- (void)priv;
-#endif
+#endif /* HAVE_MLX5DV_DR */
+ if (sh->tag_table) {
+ /* tags should be destroyed with flow before. */
+ mlx5_hlist_destroy(sh->tag_table, NULL, NULL);
+ sh->tag_table = NULL;
+ }
+ mlx5_free_table_hash_list(priv);
}
/**
SOCKET_ID_ANY, 0);
if (mz == NULL) {
DRV_LOG(ERR,
- "Cannot allocate mlx5 shared data\n");
+ "Cannot allocate mlx5 shared data");
ret = -rte_errno;
goto error;
}
mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
if (mz == NULL) {
DRV_LOG(ERR,
- "Cannot attach mlx5 shared data\n");
+ "Cannot attach mlx5 shared data");
ret = -rte_errno;
goto error;
}
socket = ctrl->socket;
}
- assert(data != NULL);
+ MLX5_ASSERT(data != NULL);
ret = rte_malloc_socket(__func__, size, alignment, socket);
if (!ret && size)
rte_errno = ENOMEM;
static void
mlx5_free_verbs_buf(void *ptr, void *data __rte_unused)
{
- assert(data != NULL);
+ MLX5_ASSERT(data != NULL);
rte_free(ptr);
}
mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev __rte_unused,
struct rte_eth_udp_tunnel *udp_tunnel)
{
- assert(udp_tunnel != NULL);
+ MLX5_ASSERT(udp_tunnel != NULL);
if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN &&
udp_tunnel->udp_port == 4789)
return 0;
((priv->sh->ctx != NULL) ? priv->sh->ctx->device->name : ""));
/* In case mlx5_dev_stop() has not been called. */
mlx5_dev_interrupt_handler_uninstall(dev);
+ mlx5_dev_interrupt_handler_devx_uninstall(dev);
mlx5_traffic_disable(dev);
mlx5_flow_flush(dev, NULL);
+ mlx5_flow_meter_flush(dev, NULL);
/* Prevent crashes when queues are still in use. */
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
priv->txqs = NULL;
}
mlx5_proc_priv_uninit(dev);
+ if (priv->mreg_cp_tbl)
+ mlx5_hlist_destroy(priv->mreg_cp_tbl, NULL, NULL);
mlx5_mprq_free_mp(dev);
mlx5_free_shared_dr(priv);
if (priv->rss_conf.rss_key != NULL)
if (priv->reta_idx != NULL)
rte_free(priv->reta_idx);
if (priv->config.vf)
- mlx5_nl_mac_addr_flush(dev);
+ mlx5_nl_mac_addr_flush(priv->nl_socket_route, mlx5_ifindex(dev),
+ dev->data->mac_addrs,
+ MLX5_MAX_MAC_ADDRESSES, priv->mac_own);
if (priv->nl_socket_route >= 0)
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
if (ret)
DRV_LOG(WARNING, "port %u some Rx queues still remain",
dev->data->port_id);
- ret = mlx5_txq_ibv_verify(dev);
+ ret = mlx5_txq_obj_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
dev->data->port_id);
unsigned int c = 0;
uint16_t port_id;
- RTE_ETH_FOREACH_DEV_OF(port_id, dev->device) {
+ MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
&rte_eth_devices[port_id] == dev)
continue;
++c;
+ break;
}
if (!c)
claim_zero(rte_eth_switch_domain_free(priv->domain_id));
.dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
.vlan_filter_set = mlx5_vlan_filter_set,
.rx_queue_setup = mlx5_rx_queue_setup,
+ .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
.tx_queue_setup = mlx5_tx_queue_setup,
+ .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
.flow_ctrl_get = mlx5_dev_get_flow_ctrl,
.filter_ctrl = mlx5_dev_filter_ctrl,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
.rx_queue_count = mlx5_rx_queue_count,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
.is_removed = mlx5_is_removed,
.udp_tunnel_port_add = mlx5_udp_tunnel_port_add,
+ .get_module_info = mlx5_get_module_info,
+ .get_module_eeprom = mlx5_get_module_eeprom,
+ .hairpin_cap_get = mlx5_hairpin_cap_get,
+ .mtr_ops_get = mlx5_flow_meter_ops_get,
};
/* Available operations from secondary process. */
.dev_infos_get = mlx5_dev_infos_get,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
+ .get_module_info = mlx5_get_module_info,
+ .get_module_eeprom = mlx5_get_module_eeprom,
};
/* Available operations in flow isolated mode. */
.dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
.vlan_filter_set = mlx5_vlan_filter_set,
.rx_queue_setup = mlx5_rx_queue_setup,
+ .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
.tx_queue_setup = mlx5_tx_queue_setup,
+ .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
.flow_ctrl_get = mlx5_dev_get_flow_ctrl,
.filter_ctrl = mlx5_dev_filter_ctrl,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
.is_removed = mlx5_is_removed,
+ .get_module_info = mlx5_get_module_info,
+ .get_module_eeprom = mlx5_get_module_eeprom,
+ .hairpin_cap_get = mlx5_hairpin_cap_get,
+ .mtr_ops_get = mlx5_flow_meter_ops_get,
};
/**
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
config->mps = !!tmp;
+ } else if (strcmp(MLX5_TX_DB_NC, key) == 0) {
+ if (tmp != MLX5_TXDB_CACHED &&
+ tmp != MLX5_TXDB_NCACHED &&
+ tmp != MLX5_TXDB_HEURISTIC) {
+ DRV_LOG(ERR, "invalid Tx doorbell "
+ "mapping parameter");
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ config->dbnc = tmp;
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
config->dv_esw_en = !!tmp;
} else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
config->dv_flow_en = !!tmp;
+ } else if (strcmp(MLX5_DV_XMETA_EN, key) == 0) {
+ if (tmp != MLX5_XMETA_MODE_LEGACY &&
+ tmp != MLX5_XMETA_MODE_META16 &&
+ tmp != MLX5_XMETA_MODE_META32) {
+ DRV_LOG(ERR, "invalid extensive "
+ "metadata parameter");
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ config->dv_xmeta_en = tmp;
} else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
config->mr_ext_memseg_en = !!tmp;
} else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
config->max_dump_files_num = tmp;
} else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
config->lro.timeout = tmp;
+ } else if (strcmp(MLX5_CLASS_ARG_NAME, key) == 0) {
+ DRV_LOG(DEBUG, "class argument is %s.", val);
} else {
DRV_LOG(WARNING, "%s: unknown parameter", key);
rte_errno = EINVAL;
MLX5_TXQ_MPW_EN,
MLX5_TXQ_MPW_HDR_DSEG_EN,
MLX5_TXQ_MAX_INLINE_LEN,
+ MLX5_TX_DB_NC,
MLX5_TX_VEC_EN,
MLX5_RX_VEC_EN,
MLX5_L3_VXLAN_EN,
MLX5_VF_NL_EN,
MLX5_DV_ESW_EN,
MLX5_DV_FLOW_EN,
+ MLX5_DV_XMETA_EN,
MLX5_MR_EXT_MEMSEG_EN,
MLX5_REPRESENTOR,
MLX5_MAX_DUMP_FILES_NUM,
MLX5_LRO_TIMEOUT_USEC,
+ MLX5_CLASS_ARG_NAME,
NULL,
};
struct rte_kvargs *kvlist;
if (mlx5_init_shared_data())
return -rte_errno;
sd = mlx5_shared_data;
- assert(sd);
+ MLX5_ASSERT(sd);
rte_spinlock_lock(&sd->lock);
switch (rte_eal_process_type()) {
case RTE_PROC_PRIMARY:
DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
}
+/**
+ * Configures the metadata mask fields in the shared context.
+ *
+ * @param [in] dev
+ * Pointer to Ethernet device.
+ */
+static void
+mlx5_set_metadata_mask(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ uint32_t meta, mark, reg_c0;
+
+ reg_c0 = ~priv->vport_meta_mask;
+ switch (priv->config.dv_xmeta_en) {
+ case MLX5_XMETA_MODE_LEGACY:
+ meta = UINT32_MAX;
+ mark = MLX5_FLOW_MARK_MASK;
+ break;
+ case MLX5_XMETA_MODE_META16:
+ meta = reg_c0 >> rte_bsf32(reg_c0);
+ mark = MLX5_FLOW_MARK_MASK;
+ break;
+ case MLX5_XMETA_MODE_META32:
+ meta = UINT32_MAX;
+ mark = (reg_c0 >> rte_bsf32(reg_c0)) & MLX5_FLOW_MARK_MASK;
+ break;
+ default:
+ meta = 0;
+ mark = 0;
+ MLX5_ASSERT(false);
+ break;
+ }
+ if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
+ DRV_LOG(WARNING, "metadata MARK mask mismatche %08X:%08X",
+ sh->dv_mark_mask, mark);
+ else
+ sh->dv_mark_mask = mark;
+ if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
+ DRV_LOG(WARNING, "metadata META mask mismatche %08X:%08X",
+ sh->dv_meta_mask, meta);
+ else
+ sh->dv_meta_mask = meta;
+ if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
+ DRV_LOG(WARNING, "metadata reg_c0 mask mismatche %08X:%08X",
+ sh->dv_meta_mask, reg_c0);
+ else
+ sh->dv_regc0_mask = reg_c0;
+ DRV_LOG(DEBUG, "metadata mode %u", priv->config.dv_xmeta_en);
+ DRV_LOG(DEBUG, "metadata MARK mask %08X", sh->dv_mark_mask);
+ DRV_LOG(DEBUG, "metadata META mask %08X", sh->dv_meta_mask);
+ DRV_LOG(DEBUG, "metadata reg_c0 mask %08X", sh->dv_regc0_mask);
+}
+
/**
* Allocate page of door-bells and register it using DevX API.
*
; /* Empty. */
/* Find the first clear bit. */
j = rte_bsf64(~page->dbr_bitmap[i]);
- assert(i < (MLX5_DBR_PER_PAGE / 64));
+ MLX5_ASSERT(i < (MLX5_DBR_PER_PAGE / 64));
page->dbr_bitmap[i] |= (1 << j);
page->dbr_count++;
*dbr_page = page;
return ret;
}
+int
+rte_pmd_mlx5_get_dyn_flag_names(char *names[], unsigned int n)
+{
+ static const char *const dynf_names[] = {
+ RTE_PMD_MLX5_FINE_GRANULARITY_INLINE,
+ RTE_MBUF_DYNFLAG_METADATA_NAME
+ };
+ unsigned int i;
+
+ if (n < RTE_DIM(dynf_names))
+ return -ENOMEM;
+ for (i = 0; i < RTE_DIM(dynf_names); i++) {
+ if (names[i] == NULL)
+ return -EINVAL;
+ strcpy(names[i], dynf_names[i]);
+ }
+ return RTE_DIM(dynf_names);
+}
+
+/**
+ * Check sibling device configurations.
+ *
+ * Sibling devices sharing the Infiniband device context
+ * should have compatible configurations. This regards
+ * representors and bonding slaves.
+ *
+ * @param priv
+ * Private device descriptor.
+ * @param config
+ * Configuration of the device is going to be created.
+ *
+ * @return
+ * 0 on success, EINVAL otherwise
+ */
+static int
+mlx5_dev_check_sibling_config(struct mlx5_priv *priv,
+ struct mlx5_dev_config *config)
+{
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_dev_config *sh_conf = NULL;
+ uint16_t port_id;
+
+ MLX5_ASSERT(sh);
+ /* Nothing to compare for the single/first device. */
+ if (sh->refcnt == 1)
+ return 0;
+ /* Find the device with shared context. */
+ MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ struct mlx5_priv *opriv =
+ rte_eth_devices[port_id].data->dev_private;
+
+ if (opriv && opriv != priv && opriv->sh == sh) {
+ sh_conf = &opriv->config;
+ break;
+ }
+ }
+ if (!sh_conf)
+ return 0;
+ if (sh_conf->dv_flow_en ^ config->dv_flow_en) {
+ DRV_LOG(ERR, "\"dv_flow_en\" configuration mismatch"
+ " for shared %s context", sh->ibdev_name);
+ rte_errno = EINVAL;
+ return rte_errno;
+ }
+ if (sh_conf->dv_xmeta_en ^ config->dv_xmeta_en) {
+ DRV_LOG(ERR, "\"dv_xmeta_en\" configuration mismatch"
+ " for shared %s context", sh->ibdev_name);
+ rte_errno = EINVAL;
+ return rte_errno;
+ }
+ return 0;
+}
/**
* Spawn an Ethernet device from Verbs information.
*
int own_domain_id = 0;
uint16_t port_id;
unsigned int i;
+#ifdef HAVE_MLX5DV_DR_DEVX_PORT
+ struct mlx5dv_devx_port devx_port = { .comp_mask = 0 };
+#endif
/* Determine if this port representor is supposed to be spawned. */
if (switch_info->representor && dpdk_dev->devargs) {
}
}
/* Build device name. */
- if (!switch_info->representor)
- strlcpy(name, dpdk_dev->name, sizeof(name));
- else
- snprintf(name, sizeof(name), "%s_representor_%u",
- dpdk_dev->name, switch_info->port_name);
+ if (spawn->pf_bond < 0) {
+ /* Single device. */
+ if (!switch_info->representor)
+ strlcpy(name, dpdk_dev->name, sizeof(name));
+ else
+ snprintf(name, sizeof(name), "%s_representor_%u",
+ dpdk_dev->name, switch_info->port_name);
+ } else {
+ /* Bonding device. */
+ if (!switch_info->representor)
+ snprintf(name, sizeof(name), "%s_%s",
+ dpdk_dev->name, spawn->ibv_dev->name);
+ else
+ snprintf(name, sizeof(name), "%s_%s_representor_%u",
+ dpdk_dev->name, spawn->ibv_dev->name,
+ switch_info->port_name);
+ }
/* check if the device is already spawned */
if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
rte_errno = EEXIST;
eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev);
return eth_dev;
}
- sh = mlx5_alloc_shared_ibctx(spawn);
+ /*
+ * Some parameters ("tx_db_nc" in particularly) are needed in
+ * advance to create dv/verbs device context. We proceed the
+ * devargs here to get ones, and later proceed devargs again
+ * to override some hardware settings.
+ */
+ err = mlx5_args(&config, dpdk_dev->devargs);
+ if (err) {
+ err = rte_errno;
+ DRV_LOG(ERR, "failed to process device arguments: %s",
+ strerror(rte_errno));
+ goto error;
+ }
+ sh = mlx5_alloc_shared_ibctx(spawn, &config);
if (!sh)
return NULL;
config.devx = sh->devx;
tunnel_en = ((dv_attr.tunnel_offloads_caps &
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
(dv_attr.tunnel_offloads_caps &
- MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE) &&
+ (dv_attr.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GENEVE));
}
DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
tunnel_en ? "" : "not ");
}
priv->sh = sh;
priv->ibv_port = spawn->ibv_port;
+ priv->pci_dev = spawn->pci_dev;
priv->mtu = RTE_ETHER_MTU;
#ifndef RTE_ARCH_64
/* Initialize UAR access locks for 32bit implementations. */
/* Some internal functions rely on Netlink sockets, open them now. */
priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
- priv->nl_sn = 0;
priv->representor = !!switch_info->representor;
priv->master = !!switch_info->master;
priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
+ priv->vport_meta_tag = 0;
+ priv->vport_meta_mask = 0;
+ priv->pf_bond = spawn->pf_bond;
+#ifdef HAVE_MLX5DV_DR_DEVX_PORT
+ /*
+ * The DevX port query API is implemented. E-Switch may use
+ * either vport or reg_c[0] metadata register to match on
+ * vport index. The engaged part of metadata register is
+ * defined by mask.
+ */
+ if (switch_info->representor || switch_info->master) {
+ devx_port.comp_mask = MLX5DV_DEVX_PORT_VPORT |
+ MLX5DV_DEVX_PORT_MATCH_REG_C_0;
+ err = mlx5_glue->devx_port_query(sh->ctx, spawn->ibv_port,
+ &devx_port);
+ if (err) {
+ DRV_LOG(WARNING,
+ "can't query devx port %d on device %s",
+ spawn->ibv_port, spawn->ibv_dev->name);
+ devx_port.comp_mask = 0;
+ }
+ }
+ if (devx_port.comp_mask & MLX5DV_DEVX_PORT_MATCH_REG_C_0) {
+ priv->vport_meta_tag = devx_port.reg_c_0.value;
+ priv->vport_meta_mask = devx_port.reg_c_0.mask;
+ if (!priv->vport_meta_mask) {
+ DRV_LOG(ERR, "vport zero mask for port %d"
+ " on bonding device %s",
+ spawn->ibv_port, spawn->ibv_dev->name);
+ err = ENOTSUP;
+ goto error;
+ }
+ if (priv->vport_meta_tag & ~priv->vport_meta_mask) {
+ DRV_LOG(ERR, "invalid vport tag for port %d"
+ " on bonding device %s",
+ spawn->ibv_port, spawn->ibv_dev->name);
+ err = ENOTSUP;
+ goto error;
+ }
+ }
+ if (devx_port.comp_mask & MLX5DV_DEVX_PORT_VPORT) {
+ priv->vport_id = devx_port.vport_num;
+ } else if (spawn->pf_bond >= 0) {
+ DRV_LOG(ERR, "can't deduce vport index for port %d"
+ " on bonding device %s",
+ spawn->ibv_port, spawn->ibv_dev->name);
+ err = ENOTSUP;
+ goto error;
+ } else {
+ /* Suppose vport index in compatible way. */
+ priv->vport_id = switch_info->representor ?
+ switch_info->port_name + 1 : -1;
+ }
+#else
/*
- * Currently we support single E-Switch per PF configurations
+ * Kernel/rdma_core support single E-Switch per PF configurations
* only and vport_id field contains the vport index for
* associated VF, which is deduced from representor port name.
* For example, let's have the IB device port 10, it has
*/
priv->vport_id = switch_info->representor ?
switch_info->port_name + 1 : -1;
- /* representor_id field keeps the unmodified port/VF index. */
+#endif
+ /* representor_id field keeps the unmodified VF index. */
priv->representor_id = switch_info->representor ?
switch_info->port_name : -1;
/*
* Look for sibling devices in order to reuse their switch domain
* if any, otherwise allocate one.
*/
- RTE_ETH_FOREACH_DEV_OF(port_id, dpdk_dev) {
+ MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
const struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
if (!opriv ||
+ opriv->sh != priv->sh ||
opriv->domain_id ==
RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
continue;
}
own_domain_id = 1;
}
- err = mlx5_args(&config, dpdk_dev->devargs);
- if (err) {
- err = rte_errno;
- DRV_LOG(ERR, "failed to process device arguments: %s",
- strerror(rte_errno));
+ /* Override some values set by hardware configuration. */
+ mlx5_args(&config, dpdk_dev->devargs);
+ err = mlx5_dev_check_sibling_config(priv, &config);
+ if (err)
goto error;
- }
config.hw_csum = !!(sh->device_attr.device_cap_flags_ex &
IBV_DEVICE_RAW_IP_CSUM);
DRV_LOG(DEBUG, "checksum offloading is %ssupported",
!defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
DRV_LOG(DEBUG, "counters are not supported");
#endif
-#ifndef HAVE_IBV_FLOW_DV_SUPPORT
+#if !defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_MLX5DV_DR)
if (config.dv_flow_en) {
DRV_LOG(WARNING, "DV flow is not supported");
config.dv_flow_en = 0;
else
config.mps = config.mps ? mps : MLX5_MPW_DISABLED;
DRV_LOG(INFO, "%sMPS is %s",
- config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
+ config.mps == MLX5_MPW_ENHANCED ? "enhanced " :
+ config.mps == MLX5_MPW ? "legacy " : "",
config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
if (config.cqe_comp && !cqe_comp) {
DRV_LOG(WARNING, "Rx CQE compression isn't supported");
priv->counter_fallback = 1;
#endif
if (priv->counter_fallback)
- DRV_LOG(INFO, "Use fall-back DV counter management\n");
+ DRV_LOG(INFO, "Use fall-back DV counter management");
/* Check for LRO support. */
- if (config.dest_tir && config.hca_attr.lro_cap) {
+ if (config.dest_tir && config.hca_attr.lro_cap &&
+ config.dv_flow_en) {
/* TBD check tunnel lro caps. */
config.lro.supported = config.hca_attr.lro_cap;
DRV_LOG(DEBUG, "Device supports LRO");
DRV_LOG(DEBUG, "LRO session timeout set to %d usec",
config.lro.timeout);
}
+#if defined(HAVE_MLX5DV_DR) && defined(HAVE_MLX5_DR_CREATE_ACTION_FLOW_METER)
+ if (config.hca_attr.qos.sup && config.hca_attr.qos.srtcm_sup &&
+ config.dv_flow_en) {
+ uint8_t reg_c_mask =
+ config.hca_attr.qos.flow_meter_reg_c_ids;
+ /*
+ * Meter needs two REG_C's for color match and pre-sfx
+ * flow match. Here get the REG_C for color match.
+ * REG_C_0 and REG_C_1 is reserved for metadata feature.
+ */
+ reg_c_mask &= 0xfc;
+ if (__builtin_popcount(reg_c_mask) < 1) {
+ priv->mtr_en = 0;
+ DRV_LOG(WARNING, "No available register for"
+ " meter.");
+ } else {
+ priv->mtr_color_reg = ffs(reg_c_mask) - 1 +
+ REG_C_0;
+ priv->mtr_en = 1;
+ priv->mtr_reg_share =
+ config.hca_attr.qos.flow_meter_reg_share;
+ DRV_LOG(DEBUG, "The REG_C meter uses is %d",
+ priv->mtr_color_reg);
+ }
+ }
+#endif
}
if (config.mprq.enabled && mprq) {
if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
* is permanent throughout the lifetime of device. So, we may store
* the ifindex here and use the cached value further.
*/
- assert(spawn->ifindex);
+ MLX5_ASSERT(spawn->ifindex);
priv->if_index = spawn->ifindex;
eth_dev->data->dev_private = priv;
priv->dev_data = eth_dev->data;
mac.addr_bytes[0], mac.addr_bytes[1],
mac.addr_bytes[2], mac.addr_bytes[3],
mac.addr_bytes[4], mac.addr_bytes[5]);
-#ifndef NDEBUG
+#ifdef RTE_LIBRTE_MLX5_DEBUG
{
char ifname[IF_NAMESIZE];
/* Register MAC address. */
claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
if (config.vf && config.vf_nl_en)
- mlx5_nl_mac_addr_sync(eth_dev);
+ mlx5_nl_mac_addr_sync(priv->nl_socket_route,
+ mlx5_ifindex(eth_dev),
+ eth_dev->data->mac_addrs,
+ MLX5_MAX_MAC_ADDRESSES);
TAILQ_INIT(&priv->flows);
TAILQ_INIT(&priv->ctrl_flows);
+ TAILQ_INIT(&priv->flow_meters);
+ TAILQ_INIT(&priv->flow_meter_profiles);
/* Hint libmlx5 to use PMD allocator for data plane resources */
struct mlx5dv_ctx_allocators alctr = {
.alloc = &mlx5_alloc_verbs_buf,
err = mlx5_alloc_shared_dr(priv);
if (err)
goto error;
+ /*
+ * RSS id is shared with meter flow id. Meter flow id can only
+ * use the 24 MSB of the register.
+ */
+ priv->qrss_id_pool = mlx5_flow_id_pool_alloc(UINT32_MAX >>
+ MLX5_MTR_COLOR_BITS);
+ if (!priv->qrss_id_pool) {
+ DRV_LOG(ERR, "can't create flow id pool");
+ err = ENOMEM;
+ goto error;
+ }
}
/* Supported Verbs flow priority number detection. */
err = mlx5_flow_discover_priorities(eth_dev);
goto error;
}
priv->config.flow_prio = err;
+ if (!priv->config.dv_esw_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ DRV_LOG(WARNING, "metadata mode %u is not supported "
+ "(no E-Switch)", priv->config.dv_xmeta_en);
+ priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
+ }
+ mlx5_set_metadata_mask(eth_dev);
+ if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+ !priv->sh->dv_regc0_mask) {
+ DRV_LOG(ERR, "metadata mode %u is not supported "
+ "(no metadata reg_c[0] is available)",
+ priv->config.dv_xmeta_en);
+ err = ENOTSUP;
+ goto error;
+ }
+ /* Query availibility of metadata reg_c's. */
+ err = mlx5_flow_discover_mreg_c(eth_dev);
+ if (err < 0) {
+ err = -err;
+ goto error;
+ }
+ if (!mlx5_flow_ext_mreg_supported(eth_dev)) {
+ DRV_LOG(DEBUG,
+ "port %u extensive metadata register is not supported",
+ eth_dev->data->port_id);
+ if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ DRV_LOG(ERR, "metadata mode %u is not supported "
+ "(no metadata registers available)",
+ priv->config.dv_xmeta_en);
+ err = ENOTSUP;
+ goto error;
+ }
+ }
+ if (priv->config.dv_flow_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+ mlx5_flow_ext_mreg_supported(eth_dev) &&
+ priv->sh->dv_regc0_mask) {
+ priv->mreg_cp_tbl = mlx5_hlist_create(MLX5_FLOW_MREG_HNAME,
+ MLX5_FLOW_MREG_HTABLE_SZ);
+ if (!priv->mreg_cp_tbl) {
+ err = ENOMEM;
+ goto error;
+ }
+ }
return eth_dev;
error:
if (priv) {
+ if (priv->mreg_cp_tbl)
+ mlx5_hlist_destroy(priv->mreg_cp_tbl, NULL, NULL);
if (priv->sh)
mlx5_free_shared_dr(priv);
if (priv->nl_socket_route >= 0)
close(priv->nl_socket_rdma);
if (priv->vmwa_context)
mlx5_vlan_vmwa_exit(priv->vmwa_context);
+ if (priv->qrss_id_pool)
+ mlx5_flow_id_pool_release(priv->qrss_id_pool);
if (own_domain_id)
claim_zero(rte_eth_switch_domain_free(priv->domain_id));
rte_free(priv);
}
if (sh)
mlx5_free_shared_ibctx(sh);
- assert(err > 0);
+ MLX5_ASSERT(err > 0);
rte_errno = err;
return NULL;
}
return si_a->port_name - si_b->port_name;
}
+/**
+ * Match PCI information for possible slaves of bonding device.
+ *
+ * @param[in] ibv_dev
+ * Pointer to Infiniband device structure.
+ * @param[in] pci_dev
+ * Pointer to PCI device structure to match PCI address.
+ * @param[in] nl_rdma
+ * Netlink RDMA group socket handle.
+ *
+ * @return
+ * negative value if no bonding device found, otherwise
+ * positive index of slave PF in bonding.
+ */
+static int
+mlx5_device_bond_pci_match(const struct ibv_device *ibv_dev,
+ const struct rte_pci_device *pci_dev,
+ int nl_rdma)
+{
+ char ifname[IF_NAMESIZE + 1];
+ unsigned int ifindex;
+ unsigned int np, i;
+ FILE *file = NULL;
+ int pf = -1;
+
+ /*
+ * Try to get master device name. If something goes
+ * wrong suppose the lack of kernel support and no
+ * bonding devices.
+ */
+ if (nl_rdma < 0)
+ return -1;
+ if (!strstr(ibv_dev->name, "bond"))
+ return -1;
+ np = mlx5_nl_portnum(nl_rdma, ibv_dev->name);
+ if (!np)
+ return -1;
+ /*
+ * The Master device might not be on the predefined
+ * port (not on port index 1, it is not garanted),
+ * we have to scan all Infiniband device port and
+ * find master.
+ */
+ for (i = 1; i <= np; ++i) {
+ /* Check whether Infiniband port is populated. */
+ ifindex = mlx5_nl_ifindex(nl_rdma, ibv_dev->name, i);
+ if (!ifindex)
+ continue;
+ if (!if_indextoname(ifindex, ifname))
+ continue;
+ /* Try to read bonding slave names from sysfs. */
+ MKSTR(slaves,
+ "/sys/class/net/%s/master/bonding/slaves", ifname);
+ file = fopen(slaves, "r");
+ if (file)
+ break;
+ }
+ if (!file)
+ return -1;
+ /* Use safe format to check maximal buffer length. */
+ MLX5_ASSERT(atol(RTE_STR(IF_NAMESIZE)) == IF_NAMESIZE);
+ while (fscanf(file, "%" RTE_STR(IF_NAMESIZE) "s", ifname) == 1) {
+ char tmp_str[IF_NAMESIZE + 32];
+ struct rte_pci_addr pci_addr;
+ struct mlx5_switch_info info;
+
+ /* Process slave interface names in the loop. */
+ snprintf(tmp_str, sizeof(tmp_str),
+ "/sys/class/net/%s", ifname);
+ if (mlx5_dev_to_pci_addr(tmp_str, &pci_addr)) {
+ DRV_LOG(WARNING, "can not get PCI address"
+ " for netdev \"%s\"", ifname);
+ continue;
+ }
+ if (pci_dev->addr.domain != pci_addr.domain ||
+ pci_dev->addr.bus != pci_addr.bus ||
+ pci_dev->addr.devid != pci_addr.devid ||
+ pci_dev->addr.function != pci_addr.function)
+ continue;
+ /* Slave interface PCI address match found. */
+ fclose(file);
+ snprintf(tmp_str, sizeof(tmp_str),
+ "/sys/class/net/%s/phys_port_name", ifname);
+ file = fopen(tmp_str, "rb");
+ if (!file)
+ break;
+ info.name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET;
+ if (fscanf(file, "%32s", tmp_str) == 1)
+ mlx5_translate_port_name(tmp_str, &info);
+ if (info.name_type == MLX5_PHYS_PORT_NAME_TYPE_LEGACY ||
+ info.name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK)
+ pf = info.port_name;
+ break;
+ }
+ if (file)
+ fclose(file);
+ return pf;
+}
+
/**
* DPDK callback to register a PCI device.
*
* Actually this is the number of iterations to spawn.
*/
unsigned int ns = 0;
+ /*
+ * Bonding device
+ * < 0 - no bonding device (single one)
+ * >= 0 - bonding device (value is slave PF index)
+ */
+ int bd = -1;
+ struct mlx5_dev_spawn_data *list = NULL;
struct mlx5_dev_config dev_config;
int ret;
+ if (mlx5_class_get(pci_dev->device.devargs) != MLX5_CLASS_NET) {
+ DRV_LOG(DEBUG, "Skip probing - should be probed by other mlx5"
+ " driver.");
+ return 1;
+ }
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ mlx5_pmd_socket_init();
ret = mlx5_init_once();
if (ret) {
DRV_LOG(ERR, "unable to init PMD global data: %s",
strerror(rte_errno));
return -rte_errno;
}
- assert(pci_drv == &mlx5_driver);
+ MLX5_ASSERT(pci_drv == &mlx5_driver);
errno = 0;
ibv_list = mlx5_glue->get_device_list(&ret);
if (!ibv_list) {
* matching ones, gathering into the list.
*/
struct ibv_device *ibv_match[ret + 1];
- int nl_route = -1;
- int nl_rdma = -1;
+ int nl_route = mlx5_nl_init(NETLINK_ROUTE);
+ int nl_rdma = mlx5_nl_init(NETLINK_RDMA);
unsigned int i;
while (ret-- > 0) {
struct rte_pci_addr pci_addr;
DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name);
- if (mlx5_ibv_device_to_pci_addr(ibv_list[ret], &pci_addr))
+ bd = mlx5_device_bond_pci_match
+ (ibv_list[ret], pci_dev, nl_rdma);
+ if (bd >= 0) {
+ /*
+ * Bonding device detected. Only one match is allowed,
+ * the bonding is supported over multi-port IB device,
+ * there should be no matches on representor PCI
+ * functions or non VF LAG bonding devices with
+ * specified address.
+ */
+ if (nd) {
+ DRV_LOG(ERR,
+ "multiple PCI match on bonding device"
+ "\"%s\" found", ibv_list[ret]->name);
+ rte_errno = ENOENT;
+ ret = -rte_errno;
+ goto exit;
+ }
+ DRV_LOG(INFO, "PCI information matches for"
+ " slave %d bonding device \"%s\"",
+ bd, ibv_list[ret]->name);
+ ibv_match[nd++] = ibv_list[ret];
+ break;
+ }
+ if (mlx5_dev_to_pci_addr
+ (ibv_list[ret]->ibdev_path, &pci_addr))
continue;
if (pci_dev->addr.domain != pci_addr.domain ||
pci_dev->addr.bus != pci_addr.bus ||
ibv_match[nd] = NULL;
if (!nd) {
/* No device matches, just complain and bail out. */
- mlx5_glue->free_device_list(ibv_list);
DRV_LOG(WARNING,
"no Verbs device matches PCI device " PCI_PRI_FMT ","
" are kernel drivers loaded?",
pci_dev->addr.devid, pci_dev->addr.function);
rte_errno = ENOENT;
ret = -rte_errno;
- return ret;
+ goto exit;
}
- nl_route = mlx5_nl_init(NETLINK_ROUTE);
- nl_rdma = mlx5_nl_init(NETLINK_RDMA);
if (nd == 1) {
/*
* Found single matching device may have multiple ports.
if (!np)
DRV_LOG(WARNING, "can not get IB device \"%s\""
" ports number", ibv_match[0]->name);
+ if (bd >= 0 && !np) {
+ DRV_LOG(ERR, "can not get ports"
+ " for bonding device");
+ rte_errno = ENOENT;
+ ret = -rte_errno;
+ goto exit;
+ }
+ }
+#ifndef HAVE_MLX5DV_DR_DEVX_PORT
+ if (bd >= 0) {
+ /*
+ * This may happen if there is VF LAG kernel support and
+ * application is compiled with older rdma_core library.
+ */
+ DRV_LOG(ERR,
+ "No kernel/verbs support for VF LAG bonding found.");
+ rte_errno = ENOTSUP;
+ ret = -rte_errno;
+ goto exit;
}
+#endif
/*
* Now we can determine the maximal
* amount of devices to be spawned.
*/
- struct mlx5_dev_spawn_data list[np ? np : nd];
-
- if (np > 1) {
+ list = rte_zmalloc("device spawn data",
+ sizeof(struct mlx5_dev_spawn_data) *
+ (np ? np : nd),
+ RTE_CACHE_LINE_SIZE);
+ if (!list) {
+ DRV_LOG(ERR, "spawn data array allocation failure");
+ rte_errno = ENOMEM;
+ ret = -rte_errno;
+ goto exit;
+ }
+ if (bd >= 0 || np > 1) {
/*
* Single IB device with multiple ports found,
* it may be E-Switch master device and representors.
* We have to perform identification trough the ports.
*/
- assert(nl_rdma >= 0);
- assert(ns == 0);
- assert(nd == 1);
+ MLX5_ASSERT(nl_rdma >= 0);
+ MLX5_ASSERT(ns == 0);
+ MLX5_ASSERT(nd == 1);
+ MLX5_ASSERT(np);
for (i = 1; i <= np; ++i) {
list[ns].max_port = np;
list[ns].ibv_port = i;
list[ns].ibv_dev = ibv_match[0];
list[ns].eth_dev = NULL;
list[ns].pci_dev = pci_dev;
+ list[ns].pf_bond = bd;
list[ns].ifindex = mlx5_nl_ifindex
(nl_rdma, list[ns].ibv_dev->name, i);
if (!list[ns].ifindex) {
(list[ns].ifindex,
&list[ns].info);
}
+ if (!ret && bd >= 0) {
+ switch (list[ns].info.name_type) {
+ case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
+ if (list[ns].info.port_name == bd)
+ ns++;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
+ if (list[ns].info.pf_num == bd)
+ ns++;
+ break;
+ default:
+ break;
+ }
+ continue;
+ }
if (!ret && (list[ns].info.representor ^
list[ns].info.master))
ns++;
list[ns].ibv_dev = ibv_match[i];
list[ns].eth_dev = NULL;
list[ns].pci_dev = pci_dev;
+ list[ns].pf_bond = -1;
list[ns].ifindex = 0;
if (nl_rdma >= 0)
list[ns].ifindex = mlx5_nl_ifindex
goto exit;
}
}
- assert(ns);
+ MLX5_ASSERT(ns);
/*
* Sort list to probe devices in natural order for users convenience
* (i.e. master first, then representors from lowest to highest ID).
dev_config = (struct mlx5_dev_config){
.hw_padding = 0,
.mps = MLX5_ARG_UNSET,
+ .dbnc = MLX5_ARG_UNSET,
.rx_vec_en = 1,
.txq_inline_max = MLX5_ARG_UNSET,
.txq_inline_min = MLX5_ARG_UNSET,
.min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
},
.dv_esw_en = 1,
+ .dv_flow_en = 1,
};
/* Device specific configuration. */
switch (pci_dev->id.device_id) {
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF:
dev_config.vf = 1;
break;
default:
rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
/* Restore non-PCI flags cleared by the above call. */
list[i].eth_dev->data->dev_flags |= restore;
+ mlx5_dev_interrupt_handler_devx_install(list[i].eth_dev);
rte_eth_dev_probing_finish(list[i].eth_dev);
}
if (i != ns) {
/*
* Do the routine cleanup:
* - close opened Netlink sockets
+ * - free allocated spawn data array
* - free the Infiniband device list
*/
if (nl_rdma >= 0)
close(nl_rdma);
if (nl_route >= 0)
close(nl_route);
- assert(ibv_list);
+ if (list)
+ rte_free(list);
+ MLX5_ASSERT(ibv_list);
mlx5_glue->free_device_list(ibv_list);
return ret;
}
+/**
+ * Look for the ethernet device belonging to mlx5 driver.
+ *
+ * @param[in] port_id
+ * port_id to start looking for device.
+ * @param[in] pci_dev
+ * Pointer to the hint PCI device. When device is being probed
+ * the its siblings (master and preceding representors might
+ * not have assigned driver yet (because the mlx5_pci_probe()
+ * is not completed yet, for this case match on hint PCI
+ * device may be used to detect sibling device.
+ *
+ * @return
+ * port_id of found device, RTE_MAX_ETHPORT if not found.
+ */
+uint16_t
+mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev)
+{
+ while (port_id < RTE_MAX_ETHPORTS) {
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+ if (dev->state != RTE_ETH_DEV_UNUSED &&
+ dev->device &&
+ (dev->device == &pci_dev->device ||
+ (dev->device->driver &&
+ dev->device->driver->name &&
+ !strcmp(dev->device->driver->name, MLX5_DRIVER_NAME))))
+ break;
+ port_id++;
+ }
+ if (port_id >= RTE_MAX_ETHPORTS)
+ return RTE_MAX_ETHPORTS;
+ return port_id;
+}
+
/**
* DPDK callback to remove a PCI device.
*
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
},
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
+ },
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
+ },
{
.vendor_id = 0
}
RTE_PCI_DRV_PROBE_AGAIN,
};
-#ifdef RTE_IBVERBS_LINK_DLOPEN
-
-/**
- * Suffix RTE_EAL_PMD_PATH with "-glue".
- *
- * This function performs a sanity check on RTE_EAL_PMD_PATH before
- * suffixing its last component.
- *
- * @param buf[out]
- * Output buffer, should be large enough otherwise NULL is returned.
- * @param size
- * Size of @p out.
- *
- * @return
- * Pointer to @p buf or @p NULL in case suffix cannot be appended.
- */
-static char *
-mlx5_glue_path(char *buf, size_t size)
-{
- static const char *const bad[] = { "/", ".", "..", NULL };
- const char *path = RTE_EAL_PMD_PATH;
- size_t len = strlen(path);
- size_t off;
- int i;
-
- while (len && path[len - 1] == '/')
- --len;
- for (off = len; off && path[off - 1] != '/'; --off)
- ;
- for (i = 0; bad[i]; ++i)
- if (!strncmp(path + off, bad[i], (int)(len - off)))
- goto error;
- i = snprintf(buf, size, "%.*s-glue", (int)len, path);
- if (i == -1 || (size_t)i >= size)
- goto error;
- return buf;
-error:
- DRV_LOG(ERR,
- "unable to append \"-glue\" to last component of"
- " RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\"),"
- " please re-configure DPDK");
- return NULL;
-}
-
-/**
- * Initialization routine for run-time dependency on rdma-core.
- */
-static int
-mlx5_glue_init(void)
-{
- char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")];
- const char *path[] = {
- /*
- * A basic security check is necessary before trusting
- * MLX5_GLUE_PATH, which may override RTE_EAL_PMD_PATH.
- */
- (geteuid() == getuid() && getegid() == getgid() ?
- getenv("MLX5_GLUE_PATH") : NULL),
- /*
- * When RTE_EAL_PMD_PATH is set, use its glue-suffixed
- * variant, otherwise let dlopen() look up libraries on its
- * own.
- */
- (*RTE_EAL_PMD_PATH ?
- mlx5_glue_path(glue_path, sizeof(glue_path)) : ""),
- };
- unsigned int i = 0;
- void *handle = NULL;
- void **sym;
- const char *dlmsg;
-
- while (!handle && i != RTE_DIM(path)) {
- const char *end;
- size_t len;
- int ret;
-
- if (!path[i]) {
- ++i;
- continue;
- }
- end = strpbrk(path[i], ":;");
- if (!end)
- end = path[i] + strlen(path[i]);
- len = end - path[i];
- ret = 0;
- do {
- char name[ret + 1];
-
- ret = snprintf(name, sizeof(name), "%.*s%s" MLX5_GLUE,
- (int)len, path[i],
- (!len || *(end - 1) == '/') ? "" : "/");
- if (ret == -1)
- break;
- if (sizeof(name) != (size_t)ret + 1)
- continue;
- DRV_LOG(DEBUG, "looking for rdma-core glue as \"%s\"",
- name);
- handle = dlopen(name, RTLD_LAZY);
- break;
- } while (1);
- path[i] = end + 1;
- if (!*end)
- ++i;
- }
- if (!handle) {
- rte_errno = EINVAL;
- dlmsg = dlerror();
- if (dlmsg)
- DRV_LOG(WARNING, "cannot load glue library: %s", dlmsg);
- goto glue_error;
- }
- sym = dlsym(handle, "mlx5_glue");
- if (!sym || !*sym) {
- rte_errno = EINVAL;
- dlmsg = dlerror();
- if (dlmsg)
- DRV_LOG(ERR, "cannot resolve glue symbol: %s", dlmsg);
- goto glue_error;
- }
- mlx5_glue = *sym;
- return 0;
-glue_error:
- if (handle)
- dlclose(handle);
- DRV_LOG(WARNING,
- "cannot initialize PMD due to missing run-time dependency on"
- " rdma-core libraries (libibverbs, libmlx5)");
- return -rte_errno;
-}
-
-#endif
-
/**
* Driver initialization routine.
*/
mlx5_set_ptype_table();
mlx5_set_cksum_table();
mlx5_set_swp_types_table();
- /*
- * RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
- * huge pages. Calling ibv_fork_init() during init allows
- * applications to use fork() safely for purposes other than
- * using this PMD, which is not supported in forked processes.
- */
- setenv("RDMAV_HUGEPAGES_SAFE", "1", 1);
- /* Match the size of Rx completion entry to the size of a cacheline. */
- if (RTE_CACHE_LINE_SIZE == 128)
- setenv("MLX5_CQE_SIZE", "128", 0);
- /*
- * MLX5_DEVICE_FATAL_CLEANUP tells ibv_destroy functions to
- * cleanup all the Verbs resources even when the device was removed.
- */
- setenv("MLX5_DEVICE_FATAL_CLEANUP", "1", 1);
-#ifdef RTE_IBVERBS_LINK_DLOPEN
- if (mlx5_glue_init())
- return;
- assert(mlx5_glue);
-#endif
-#ifndef NDEBUG
- /* Glue structure must not contain any NULL pointers. */
- {
- unsigned int i;
-
- for (i = 0; i != sizeof(*mlx5_glue) / sizeof(void *); ++i)
- assert(((const void *const *)mlx5_glue)[i]);
- }
-#endif
- if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) {
- DRV_LOG(ERR,
- "rdma-core glue \"%s\" mismatch: \"%s\" is required",
- mlx5_glue->version, MLX5_GLUE_VERSION);
- return;
- }
- mlx5_glue->fork_init();
- rte_pci_register(&mlx5_driver);
+ if (mlx5_glue)
+ rte_pci_register(&mlx5_driver);
}
RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
git.droids-corp.org / dpdk.git / blobdiff