-/*-
- * BSD LICENSE
- *
- * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox.
*/
#include <stddef.h>
#include <unistd.h>
#include <string.h>
#include <assert.h>
+#include <dlfcn.h>
#include <stdint.h>
#include <stdlib.h>
#include <errno.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_common.h>
+#include <rte_config.h>
#include <rte_eal_memconfig.h>
#include <rte_kvargs.h>
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
#include "mlx5_defs.h"
+#include "mlx5_glue.h"
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
}
if (priv->pd != NULL) {
assert(priv->ctx != NULL);
- claim_zero(ibv_dealloc_pd(priv->pd));
- claim_zero(ibv_close_device(priv->ctx));
+ claim_zero(mlx5_glue->dealloc_pd(priv->pd));
+ claim_zero(mlx5_glue->close_device(priv->ctx));
} else
assert(priv->ctx == NULL);
if (priv->rss_conf.rss_key != NULL)
/* Save PCI address. */
mlx5_dev[idx].pci_addr = pci_dev->addr;
- list = ibv_get_device_list(&i);
+ list = mlx5_glue->get_device_list(&i);
if (list == NULL) {
assert(errno);
if (errno == ENOSYS)
" (SR-IOV: %s)",
list[i]->name,
sriov ? "true" : "false");
- attr_ctx = ibv_open_device(list[i]);
+ attr_ctx = mlx5_glue->open_device(list[i]);
err = errno;
break;
}
if (attr_ctx == NULL) {
- ibv_free_device_list(list);
+ mlx5_glue->free_device_list(list);
switch (err) {
case 0:
ERROR("cannot access device, is mlx5_ib loaded?");
* Multi-packet send is supported by ConnectX-4 Lx PF as well
* as all ConnectX-5 devices.
*/
- mlx5dv_query_device(attr_ctx, &attrs_out);
+ mlx5_glue->dv_query_device(attr_ctx, &attrs_out);
if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
DEBUG("Enhanced MPW is supported");
cqe_comp = 0;
else
cqe_comp = 1;
- if (ibv_query_device_ex(attr_ctx, NULL, &device_attr))
+ if (mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr))
goto error;
INFO("%u port(s) detected", device_attr.orig_attr.phys_port_cnt);
DEBUG("using port %u (%08" PRIx32 ")", port, test);
- ctx = ibv_open_device(ibv_dev);
+ ctx = mlx5_glue->open_device(ibv_dev);
if (ctx == NULL) {
err = ENODEV;
goto port_error;
}
- ibv_query_device_ex(ctx, NULL, &device_attr);
+ mlx5_glue->query_device_ex(ctx, NULL, &device_attr);
/* Check port status. */
- err = ibv_query_port(ctx, port, &port_attr);
+ err = mlx5_glue->query_port(ctx, port, &port_attr);
if (err) {
ERROR("port query failed: %s", strerror(err));
goto port_error;
if (port_attr.state != IBV_PORT_ACTIVE)
DEBUG("port %d is not active: \"%s\" (%d)",
- port, ibv_port_state_str(port_attr.state),
+ port, mlx5_glue->port_state_str(port_attr.state),
port_attr.state);
/* Allocate protection domain. */
- pd = ibv_alloc_pd(ctx);
+ pd = mlx5_glue->alloc_pd(ctx);
if (pd == NULL) {
ERROR("PD allocation failure");
err = ENOMEM;
strerror(err));
goto port_error;
}
- if (ibv_query_device_ex(ctx, NULL, &device_attr_ex)) {
+ if (mlx5_glue->query_device_ex(ctx, NULL, &device_attr_ex)) {
ERROR("ibv_query_device_ex() failed");
goto port_error;
}
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
config.flow_counter_en = !!(device_attr.max_counter_sets);
- ibv_describe_counter_set(ctx, 0, &cs_desc);
+ mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
DEBUG("counter type = %d, num of cs = %ld, attributes = %d",
cs_desc.counter_type, cs_desc.num_of_cs,
cs_desc.attributes);
.free = &mlx5_free_verbs_buf,
.data = priv,
};
- mlx5dv_set_context_attr(ctx, MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
- (void *)((uintptr_t)&alctr));
+ mlx5_glue->dv_set_context_attr(ctx,
+ MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
+ (void *)((uintptr_t)&alctr));
/* Bring Ethernet device up. */
DEBUG("forcing Ethernet interface up");
if (priv)
rte_free(priv);
if (pd)
- claim_zero(ibv_dealloc_pd(pd));
+ claim_zero(mlx5_glue->dealloc_pd(pd));
if (ctx)
- claim_zero(ibv_close_device(ctx));
+ claim_zero(mlx5_glue->close_device(ctx));
break;
}
error:
if (attr_ctx)
- claim_zero(ibv_close_device(attr_ctx));
+ claim_zero(mlx5_glue->close_device(attr_ctx));
if (list)
- ibv_free_device_list(list);
+ mlx5_glue->free_device_list(list);
assert(err >= 0);
return -err;
}
.drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV,
};
+#ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
+
+/**
+ * Initialization routine for run-time dependency on rdma-core.
+ */
+static int
+mlx5_glue_init(void)
+{
+ void *handle = NULL;
+ void **sym;
+ const char *dlmsg;
+
+ handle = dlopen(MLX5_GLUE, RTLD_LAZY);
+ if (!handle) {
+ rte_errno = EINVAL;
+ dlmsg = dlerror();
+ if (dlmsg)
+ WARN("cannot load glue library: %s", dlmsg);
+ goto glue_error;
+ }
+ sym = dlsym(handle, "mlx5_glue");
+ if (!sym || !*sym) {
+ rte_errno = EINVAL;
+ dlmsg = dlerror();
+ if (dlmsg)
+ ERROR("cannot resolve glue symbol: %s", dlmsg);
+ goto glue_error;
+ }
+ mlx5_glue = *sym;
+ return 0;
+glue_error:
+ if (handle)
+ dlclose(handle);
+ WARN("cannot initialize PMD due to missing run-time"
+ " dependency on rdma-core libraries (libibverbs,"
+ " libmlx5)");
+ return -rte_errno;
+}
+
+#endif
+
/**
* Driver initialization routine.
*/
/* Match the size of Rx completion entry to the size of a cacheline. */
if (RTE_CACHE_LINE_SIZE == 128)
setenv("MLX5_CQE_SIZE", "128", 0);
- ibv_fork_init();
+#ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
+ if (mlx5_glue_init())
+ return;
+ assert(mlx5_glue);
+#endif
+ mlx5_glue->fork_init();
rte_pci_register(&mlx5_driver);
}
git.droids-corp.org / dpdk.git / blobdiff