mk: build with _GNU_SOURCE defined by default
[dpdk.git] / drivers / net / mlx5 / mlx5_ethdev.c
index eef403f..d178ed6 100644 (file)
@@ -1,38 +1,11 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright 2015 6WIND S.A.
- *   Copyright 2015 Mellanox.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of 6WIND S.A. nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox Technologies, Ltd
  */
 
 #include <stddef.h>
 #include <assert.h>
+#include <inttypes.h>
 #include <unistd.h>
 #include <stdint.h>
 #include <stdio.h>
 #include <net/if.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>
-#include <sys/utsname.h>
 #include <netinet/in.h>
 #include <linux/ethtool.h>
 #include <linux/sockios.h>
-#include <linux/version.h>
 #include <fcntl.h>
 #include <stdalign.h>
+#include <sys/un.h>
+#include <time.h>
 
 #include <rte_atomic.h>
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
+#include <rte_bus_pci.h>
 #include <rte_mbuf.h>
 #include <rte_common.h>
 #include <rte_interrupts.h>
-#include <rte_alarm.h>
 #include <rte_malloc.h>
+#include <rte_string_fns.h>
+#include <rte_rwlock.h>
 
 #include "mlx5.h"
+#include "mlx5_glue.h"
 #include "mlx5_rxtx.h"
 #include "mlx5_utils.h"
 
+/* Supported speed values found in /usr/include/linux/ethtool.h */
+#ifndef HAVE_SUPPORTED_40000baseKR4_Full
+#define SUPPORTED_40000baseKR4_Full (1 << 23)
+#endif
+#ifndef HAVE_SUPPORTED_40000baseCR4_Full
+#define SUPPORTED_40000baseCR4_Full (1 << 24)
+#endif
+#ifndef HAVE_SUPPORTED_40000baseSR4_Full
+#define SUPPORTED_40000baseSR4_Full (1 << 25)
+#endif
+#ifndef HAVE_SUPPORTED_40000baseLR4_Full
+#define SUPPORTED_40000baseLR4_Full (1 << 26)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseKR4_Full
+#define SUPPORTED_56000baseKR4_Full (1 << 27)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseCR4_Full
+#define SUPPORTED_56000baseCR4_Full (1 << 28)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseSR4_Full
+#define SUPPORTED_56000baseSR4_Full (1 << 29)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseLR4_Full
+#define SUPPORTED_56000baseLR4_Full (1 << 30)
+#endif
+
 /* Add defines in case the running kernel is not the same as user headers. */
 #ifndef ETHTOOL_GLINKSETTINGS
 struct ethtool_link_settings {
@@ -115,46 +117,21 @@ struct ethtool_link_settings {
 #endif
 
 /**
- * Return private structure associated with an Ethernet device.
- *
- * @param dev
- *   Pointer to Ethernet device structure.
- *
- * @return
- *   Pointer to private structure.
- */
-struct priv *
-mlx5_get_priv(struct rte_eth_dev *dev)
-{
-       return dev->data->dev_private;
-}
-
-/**
- * Check if running as a secondary process.
+ * Get master interface name from private structure.
  *
- * @return
- *   Nonzero if running as a secondary process.
- */
-inline int
-mlx5_is_secondary(void)
-{
-       return rte_eal_process_type() == RTE_PROC_SECONDARY;
-}
-
-/**
- * Get interface name from private structure.
- *
- * @param[in] priv
- *   Pointer to private structure.
+ * @param[in] dev
+ *   Pointer to Ethernet device.
  * @param[out] ifname
  *   Interface name output buffer.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
-int
-priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
+static int
+mlx5_get_master_ifname(const struct rte_eth_dev *dev,
+                      char (*ifname)[IF_NAMESIZE])
 {
+       struct priv *priv = dev->data->dev_private;
        DIR *dir;
        struct dirent *dent;
        unsigned int dev_type = 0;
@@ -162,11 +139,13 @@ priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
        char match[IF_NAMESIZE] = "";
 
        {
-               MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
+               MKSTR(path, "%s/device/net", priv->ibdev_path);
 
                dir = opendir(path);
-               if (dir == NULL)
-                       return -1;
+               if (dir == NULL) {
+                       rte_errno = errno;
+                       return -rte_errno;
+               }
        }
        while ((dent = readdir(dir)) != NULL) {
                char *name = dent->d_name;
@@ -180,7 +159,7 @@ priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
                        continue;
 
                MKSTR(path, "%s/device/net/%s/%s",
-                     priv->ctx->device->ibdev_path, name,
+                     priv->ibdev_path, name,
                      (dev_type ? "dev_id" : "dev_port"));
 
                file = fopen(path, "rb");
@@ -212,360 +191,191 @@ try_dev_id:
                if (dev_port == dev_port_prev)
                        goto try_dev_id;
                dev_port_prev = dev_port;
-               if (dev_port == (priv->port - 1u))
-                       snprintf(match, sizeof(match), "%s", name);
+               if (dev_port == 0)
+                       strlcpy(match, name, sizeof(match));
        }
        closedir(dir);
-       if (match[0] == '\0')
-               return -1;
+       if (match[0] == '\0') {
+               rte_errno = ENOENT;
+               return -rte_errno;
+       }
        strncpy(*ifname, match, sizeof(*ifname));
        return 0;
 }
 
 /**
- * Check if the counter is located on ib counters file.
- *
- * @param[in] cntr
- *   Counter name.
+ * Get interface name from private structure.
  *
- * @return
- *   1 if counter is located on ib counters file , 0 otherwise.
- */
-int
-priv_is_ib_cntr(const char *cntr)
-{
-       if (!strcmp(cntr, "out_of_buffer"))
-               return 1;
-       return 0;
-}
-
-/**
- * Read from sysfs entry.
+ * This is a port representor-aware version of mlx5_get_master_ifname().
  *
- * @param[in] priv
- *   Pointer to private structure.
- * @param[in] entry
- *   Entry name relative to sysfs path.
- * @param[out] buf
- *   Data output buffer.
- * @param size
- *   Buffer size.
+ * @param[in] dev
+ *   Pointer to Ethernet device.
+ * @param[out] ifname
+ *   Interface name output buffer.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
-static int
-priv_sysfs_read(const struct priv *priv, const char *entry,
-               char *buf, size_t size)
+int
+mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE])
 {
-       char ifname[IF_NAMESIZE];
-       FILE *file;
-       int ret;
-       int err;
-
-       if (priv_get_ifname(priv, &ifname))
-               return -1;
-
-       if (priv_is_ib_cntr(entry)) {
-               MKSTR(path, "%s/ports/1/hw_counters/%s",
-                     priv->ctx->device->ibdev_path, entry);
-               file = fopen(path, "rb");
-       } else {
-               MKSTR(path, "%s/device/net/%s/%s",
-                     priv->ctx->device->ibdev_path, ifname, entry);
-               file = fopen(path, "rb");
+       struct priv *priv = dev->data->dev_private;
+       unsigned int ifindex =
+               priv->nl_socket_rdma >= 0 ?
+               mlx5_nl_ifindex(priv->nl_socket_rdma, priv->ibdev_name) : 0;
+
+       if (!ifindex) {
+               if (!priv->representor)
+                       return mlx5_get_master_ifname(dev, ifname);
+               rte_errno = ENXIO;
+               return -rte_errno;
        }
-       if (file == NULL)
-               return -1;
-       ret = fread(buf, 1, size, file);
-       err = errno;
-       if (((size_t)ret < size) && (ferror(file)))
-               ret = -1;
-       else
-               ret = size;
-       fclose(file);
-       errno = err;
-       return ret;
+       if (if_indextoname(ifindex, &(*ifname)[0]))
+               return 0;
+       rte_errno = errno;
+       return -rte_errno;
 }
 
 /**
- * Write to sysfs entry.
+ * Get the interface index from device name.
  *
- * @param[in] priv
- *   Pointer to private structure.
- * @param[in] entry
- *   Entry name relative to sysfs path.
- * @param[in] buf
- *   Data buffer.
- * @param size
- *   Buffer size.
+ * @param[in] dev
+ *   Pointer to Ethernet device.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   Nonzero interface index on success, zero otherwise and rte_errno is set.
  */
-static int
-priv_sysfs_write(const struct priv *priv, const char *entry,
-                char *buf, size_t size)
+unsigned int
+mlx5_ifindex(const struct rte_eth_dev *dev)
 {
        char ifname[IF_NAMESIZE];
-       FILE *file;
-       int ret;
-       int err;
-
-       if (priv_get_ifname(priv, &ifname))
-               return -1;
-
-       MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
-             ifname, entry);
-
-       file = fopen(path, "wb");
-       if (file == NULL)
-               return -1;
-       ret = fwrite(buf, 1, size, file);
-       err = errno;
-       if (((size_t)ret < size) || (ferror(file)))
-               ret = -1;
-       else
-               ret = size;
-       fclose(file);
-       errno = err;
-       return ret;
-}
-
-/**
- * Get unsigned long sysfs property.
- *
- * @param priv
- *   Pointer to private structure.
- * @param[in] name
- *   Entry name relative to sysfs path.
- * @param[out] value
- *   Value output buffer.
- *
- * @return
- *   0 on success, -1 on failure and errno is set.
- */
-static int
-priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
-{
-       int ret;
-       unsigned long value_ret;
-       char value_str[32];
-
-       ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
-       if (ret == -1) {
-               DEBUG("cannot read %s value from sysfs: %s",
-                     name, strerror(errno));
-               return -1;
-       }
-       value_str[ret] = '\0';
-       errno = 0;
-       value_ret = strtoul(value_str, NULL, 0);
-       if (errno) {
-               DEBUG("invalid %s value `%s': %s", name, value_str,
-                     strerror(errno));
-               return -1;
-       }
-       *value = value_ret;
-       return 0;
-}
+       unsigned int ifindex;
 
-/**
- * Set unsigned long sysfs property.
- *
- * @param priv
- *   Pointer to private structure.
- * @param[in] name
- *   Entry name relative to sysfs path.
- * @param value
- *   Value to set.
- *
- * @return
- *   0 on success, -1 on failure and errno is set.
- */
-static int
-priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
-{
-       int ret;
-       MKSTR(value_str, "%lu", value);
-
-       ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
-       if (ret == -1) {
-               DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
-                     name, value_str, value, strerror(errno));
-               return -1;
-       }
-       return 0;
+       if (mlx5_get_ifname(dev, &ifname))
+               return 0;
+       ifindex = if_nametoindex(ifname);
+       if (!ifindex)
+               rte_errno = errno;
+       return ifindex;
 }
 
 /**
  * Perform ifreq ioctl() on associated Ethernet device.
  *
- * @param[in] priv
- *   Pointer to private structure.
+ * @param[in] dev
+ *   Pointer to Ethernet device.
  * @param req
  *   Request number to pass to ioctl().
  * @param[out] ifr
  *   Interface request structure output buffer.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
-priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
+mlx5_ifreq(const struct rte_eth_dev *dev, int req, struct ifreq *ifr)
 {
        int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
-       int ret = -1;
+       int ret = 0;
 
-       if (sock == -1)
-               return ret;
-       if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
-               ret = ioctl(sock, req, ifr);
+       if (sock == -1) {
+               rte_errno = errno;
+               return -rte_errno;
+       }
+       ret = mlx5_get_ifname(dev, &ifr->ifr_name);
+       if (ret)
+               goto error;
+       ret = ioctl(sock, req, ifr);
+       if (ret == -1) {
+               rte_errno = errno;
+               goto error;
+       }
        close(sock);
-       return ret;
-}
-
-/**
- * Return the number of active VFs for the current device.
- *
- * @param[in] priv
- *   Pointer to private structure.
- * @param[out] num_vfs
- *   Number of active VFs.
- *
- * @return
- *   0 on success, -1 on failure and errno is set.
- */
-int
-priv_get_num_vfs(struct priv *priv, uint16_t *num_vfs)
-{
-       /* The sysfs entry name depends on the operating system. */
-       const char **name = (const char *[]){
-               "device/sriov_numvfs",
-               "device/mlx5_num_vfs",
-               NULL,
-       };
-       int ret;
-
-       do {
-               unsigned long ulong_num_vfs;
-
-               ret = priv_get_sysfs_ulong(priv, *name, &ulong_num_vfs);
-               if (!ret)
-                       *num_vfs = ulong_num_vfs;
-       } while (*(++name) && ret);
-       return ret;
+       return 0;
+error:
+       close(sock);
+       return -rte_errno;
 }
 
 /**
  * Get device MTU.
  *
- * @param priv
- *   Pointer to private structure.
+ * @param dev
+ *   Pointer to Ethernet device.
  * @param[out] mtu
  *   MTU value output buffer.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
-priv_get_mtu(struct priv *priv, uint16_t *mtu)
+mlx5_get_mtu(struct rte_eth_dev *dev, uint16_t *mtu)
 {
-       unsigned long ulong_mtu;
+       struct ifreq request;
+       int ret = mlx5_ifreq(dev, SIOCGIFMTU, &request);
 
-       if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
-               return -1;
-       *mtu = ulong_mtu;
-       return 0;
-}
-
-/**
- * Read device counter from sysfs.
- *
- * @param priv
- *   Pointer to private structure.
- * @param name
- *   Counter name.
- * @param[out] cntr
- *   Counter output buffer.
- *
- * @return
- *   0 on success, -1 on failure and errno is set.
- */
-int
-priv_get_cntr_sysfs(struct priv *priv, const char *name, uint64_t *cntr)
-{
-       unsigned long ulong_ctr;
-
-       if (priv_get_sysfs_ulong(priv, name, &ulong_ctr) == -1)
-               return -1;
-       *cntr = ulong_ctr;
+       if (ret)
+               return ret;
+       *mtu = request.ifr_mtu;
        return 0;
 }
 
 /**
  * Set device MTU.
  *
- * @param priv
- *   Pointer to private structure.
+ * @param dev
+ *   Pointer to Ethernet device.
  * @param mtu
  *   MTU value to set.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 static int
-priv_set_mtu(struct priv *priv, uint16_t mtu)
+mlx5_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 {
-       uint16_t new_mtu;
+       struct ifreq request = { .ifr_mtu = mtu, };
 
-       if (priv_set_sysfs_ulong(priv, "mtu", mtu) ||
-           priv_get_mtu(priv, &new_mtu))
-               return -1;
-       if (new_mtu == mtu)
-               return 0;
-       errno = EINVAL;
-       return -1;
+       return mlx5_ifreq(dev, SIOCSIFMTU, &request);
 }
 
 /**
  * Set device flags.
  *
- * @param priv
- *   Pointer to private structure.
+ * @param dev
+ *   Pointer to Ethernet device.
  * @param keep
  *   Bitmask for flags that must remain untouched.
  * @param flags
  *   Bitmask for flags to modify.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
-priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
+mlx5_set_flags(struct rte_eth_dev *dev, unsigned int keep, unsigned int flags)
 {
-       unsigned long tmp;
+       struct ifreq request;
+       int ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &request);
 
-       if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
-               return -1;
-       tmp &= keep;
-       tmp |= (flags & (~keep));
-       return priv_set_sysfs_ulong(priv, "flags", tmp);
+       if (ret)
+               return ret;
+       request.ifr_flags &= keep;
+       request.ifr_flags |= flags & ~keep;
+       return mlx5_ifreq(dev, SIOCSIFFLAGS, &request);
 }
 
 /**
- * Ethernet device configuration.
- *
- * Prepare the driver for a given number of TX and RX queues.
+ * DPDK callback for Ethernet device configuration.
  *
  * @param dev
  *   Pointer to Ethernet device structure.
  *
  * @return
- *   0 on success, errno value on failure.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
-static int
-dev_configure(struct rte_eth_dev *dev)
+int
+mlx5_dev_configure(struct rte_eth_dev *dev)
 {
        struct priv *priv = dev->data->dev_private;
        unsigned int rxqs_n = dev->data->nb_rx_queues;
@@ -573,32 +383,61 @@ dev_configure(struct rte_eth_dev *dev)
        unsigned int i;
        unsigned int j;
        unsigned int reta_idx_n;
+       const uint8_t use_app_rss_key =
+               !!dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key;
+       int ret = 0;
 
-       priv->rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
+       if (use_app_rss_key &&
+           (dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key_len !=
+            MLX5_RSS_HASH_KEY_LEN)) {
+               DRV_LOG(ERR, "port %u RSS key len must be %s Bytes long",
+                       dev->data->port_id, RTE_STR(MLX5_RSS_HASH_KEY_LEN));
+               rte_errno = EINVAL;
+               return -rte_errno;
+       }
+       priv->rss_conf.rss_key =
+               rte_realloc(priv->rss_conf.rss_key,
+                           MLX5_RSS_HASH_KEY_LEN, 0);
+       if (!priv->rss_conf.rss_key) {
+               DRV_LOG(ERR, "port %u cannot allocate RSS hash key memory (%u)",
+                       dev->data->port_id, rxqs_n);
+               rte_errno = ENOMEM;
+               return -rte_errno;
+       }
+       memcpy(priv->rss_conf.rss_key,
+              use_app_rss_key ?
+              dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key :
+              rss_hash_default_key,
+              MLX5_RSS_HASH_KEY_LEN);
+       priv->rss_conf.rss_key_len = MLX5_RSS_HASH_KEY_LEN;
+       priv->rss_conf.rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
        priv->rxqs = (void *)dev->data->rx_queues;
        priv->txqs = (void *)dev->data->tx_queues;
        if (txqs_n != priv->txqs_n) {
-               INFO("%p: TX queues number update: %u -> %u",
-                    (void *)dev, priv->txqs_n, txqs_n);
+               DRV_LOG(INFO, "port %u Tx queues number update: %u -> %u",
+                       dev->data->port_id, priv->txqs_n, txqs_n);
                priv->txqs_n = txqs_n;
        }
-       if (rxqs_n > priv->ind_table_max_size) {
-               ERROR("cannot handle this many RX queues (%u)", rxqs_n);
-               return EINVAL;
+       if (rxqs_n > priv->config.ind_table_max_size) {
+               DRV_LOG(ERR, "port %u cannot handle this many Rx queues (%u)",
+                       dev->data->port_id, rxqs_n);
+               rte_errno = EINVAL;
+               return -rte_errno;
        }
        if (rxqs_n == priv->rxqs_n)
                return 0;
-       INFO("%p: RX queues number update: %u -> %u",
-            (void *)dev, priv->rxqs_n, rxqs_n);
+       DRV_LOG(INFO, "port %u Rx queues number update: %u -> %u",
+               dev->data->port_id, priv->rxqs_n, rxqs_n);
        priv->rxqs_n = rxqs_n;
        /* If the requested number of RX queues is not a power of two, use the
         * maximum indirection table size for better balancing.
         * The result is always rounded to the next power of two. */
        reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
-                                    priv->ind_table_max_size :
+                                    priv->config.ind_table_max_size :
                                     rxqs_n));
-       if (priv_rss_reta_index_resize(priv, reta_idx_n))
-               return ENOMEM;
+       ret = mlx5_rss_reta_index_resize(dev, reta_idx_n);
+       if (ret)
+               return ret;
        /* When the number of RX queues is not a power of two, the remaining
         * table entries are padded with reused WQs and hashes are not spread
         * uniformly. */
@@ -611,28 +450,42 @@ dev_configure(struct rte_eth_dev *dev)
 }
 
 /**
- * DPDK callback for Ethernet device configuration.
+ * Sets default tuning parameters.
  *
  * @param dev
- *   Pointer to Ethernet device structure.
- *
- * @return
- *   0 on success, negative errno value on failure.
+ *   Pointer to Ethernet device.
+ * @param[out] info
+ *   Info structure output buffer.
  */
-int
-mlx5_dev_configure(struct rte_eth_dev *dev)
+static void
+mlx5_set_default_params(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 {
        struct priv *priv = dev->data->dev_private;
-       int ret;
-
-       if (mlx5_is_secondary())
-               return -E_RTE_SECONDARY;
 
-       priv_lock(priv);
-       ret = dev_configure(dev);
-       assert(ret >= 0);
-       priv_unlock(priv);
-       return -ret;
+       /* Minimum CPU utilization. */
+       info->default_rxportconf.ring_size = 256;
+       info->default_txportconf.ring_size = 256;
+       info->default_rxportconf.burst_size = 64;
+       info->default_txportconf.burst_size = 64;
+       if (priv->link_speed_capa & ETH_LINK_SPEED_100G) {
+               info->default_rxportconf.nb_queues = 16;
+               info->default_txportconf.nb_queues = 16;
+               if (dev->data->nb_rx_queues > 2 ||
+                   dev->data->nb_tx_queues > 2) {
+                       /* Max Throughput. */
+                       info->default_rxportconf.ring_size = 2048;
+                       info->default_txportconf.ring_size = 2048;
+               }
+       } else {
+               info->default_rxportconf.nb_queues = 8;
+               info->default_txportconf.nb_queues = 8;
+               if (dev->data->nb_rx_queues > 2 ||
+                   dev->data->nb_tx_queues > 2) {
+                       /* Max Throughput. */
+                       info->default_rxportconf.ring_size = 4096;
+                       info->default_txportconf.ring_size = 4096;
+               }
+       }
 }
 
 /**
@@ -646,13 +499,11 @@ mlx5_dev_configure(struct rte_eth_dev *dev)
 void
 mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 {
-       struct priv *priv = mlx5_get_priv(dev);
+       struct priv *priv = dev->data->dev_private;
+       struct mlx5_dev_config *config = &priv->config;
        unsigned int max;
        char ifname[IF_NAMESIZE];
 
-       info->pci_dev = RTE_ETH_DEV_TO_PCI(dev);
-
-       priv_lock(priv);
        /* FIXME: we should ask the device for these values. */
        info->min_rx_bufsize = 32;
        info->max_rx_pktlen = 65536;
@@ -660,45 +511,61 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
         * Since we need one CQ per QP, the limit is the minimum number
         * between the two values.
         */
-       max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
-              priv->device_attr.max_qp : priv->device_attr.max_cq);
+       max = RTE_MIN(priv->device_attr.orig_attr.max_cq,
+                     priv->device_attr.orig_attr.max_qp);
        /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
        if (max >= 65535)
                max = 65535;
        info->max_rx_queues = max;
        info->max_tx_queues = max;
-       info->max_mac_addrs = RTE_DIM(priv->mac);
-       info->rx_offload_capa =
-               (priv->hw_csum ?
-                (DEV_RX_OFFLOAD_IPV4_CKSUM |
-                 DEV_RX_OFFLOAD_UDP_CKSUM |
-                 DEV_RX_OFFLOAD_TCP_CKSUM) :
-                0) |
-               (priv->hw_vlan_strip ? DEV_RX_OFFLOAD_VLAN_STRIP : 0);
-       if (!priv->mps)
-               info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
-       if (priv->hw_csum)
-               info->tx_offload_capa |=
-                       (DEV_TX_OFFLOAD_IPV4_CKSUM |
-                        DEV_TX_OFFLOAD_UDP_CKSUM |
-                        DEV_TX_OFFLOAD_TCP_CKSUM);
-       if (priv->tso)
-               info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO;
-       if (priv->tunnel_en)
-               info->tx_offload_capa |= (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
-                                         DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
-                                         DEV_TX_OFFLOAD_GRE_TNL_TSO);
-       if (priv_get_ifname(priv, &ifname) == 0)
+       info->max_mac_addrs = MLX5_MAX_UC_MAC_ADDRESSES;
+       info->rx_queue_offload_capa = mlx5_get_rx_queue_offloads(dev);
+       info->rx_offload_capa = (mlx5_get_rx_port_offloads() |
+                                info->rx_queue_offload_capa);
+       info->tx_offload_capa = mlx5_get_tx_port_offloads(dev);
+       if (mlx5_get_ifname(dev, &ifname) == 0)
                info->if_index = if_nametoindex(ifname);
        info->reta_size = priv->reta_idx_n ?
-               priv->reta_idx_n : priv->ind_table_max_size;
-       info->hash_key_size = ((*priv->rss_conf) ?
-                              (*priv->rss_conf)[0]->rss_key_len :
-                              0);
+               priv->reta_idx_n : config->ind_table_max_size;
+       info->hash_key_size = MLX5_RSS_HASH_KEY_LEN;
        info->speed_capa = priv->link_speed_capa;
-       priv_unlock(priv);
+       info->flow_type_rss_offloads = ~MLX5_RSS_HF_MASK;
+       mlx5_set_default_params(dev, info);
+       info->switch_info.name = dev->data->name;
+       info->switch_info.domain_id = priv->domain_id;
+       info->switch_info.port_id = priv->representor_id;
+       if (priv->representor) {
+               unsigned int i = mlx5_dev_to_port_id(dev->device, NULL, 0);
+               uint16_t port_id[i];
+
+               i = RTE_MIN(mlx5_dev_to_port_id(dev->device, port_id, i), i);
+               while (i--) {
+                       struct priv *opriv =
+                               rte_eth_devices[port_id[i]].data->dev_private;
+
+                       if (!opriv ||
+                           opriv->representor ||
+                           opriv->domain_id != priv->domain_id)
+                               continue;
+                       /*
+                        * Override switch name with that of the master
+                        * device.
+                        */
+                       info->switch_info.name = opriv->dev_data->name;
+                       break;
+               }
+       }
 }
 
+/**
+ * Get supported packet types.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   A pointer to the supported Packet types array.
+ */
 const uint32_t *
 mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
 {
@@ -721,6 +588,7 @@ mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
        };
 
        if (dev->rx_pkt_burst == mlx5_rx_burst ||
+           dev->rx_pkt_burst == mlx5_rx_burst_mprq ||
            dev->rx_pkt_burst == mlx5_rx_burst_vec)
                return ptypes;
        return NULL;
@@ -731,39 +599,48 @@ mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
  *
  * @param dev
  *   Pointer to Ethernet device structure.
- * @param wait_to_complete
- *   Wait for request completion (ignored).
+ * @param[out] link
+ *   Storage for current link status.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 static int
-mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, int wait_to_complete)
+mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev,
+                              struct rte_eth_link *link)
 {
-       struct priv *priv = mlx5_get_priv(dev);
+       struct priv *priv = dev->data->dev_private;
        struct ethtool_cmd edata = {
                .cmd = ETHTOOL_GSET /* Deprecated since Linux v4.5. */
        };
        struct ifreq ifr;
        struct rte_eth_link dev_link;
        int link_speed = 0;
+       int ret;
 
-       /* priv_lock() is not taken to allow concurrent calls. */
-
-       (void)wait_to_complete;
-       if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
-               WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
-               return -1;
+       ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
+       if (ret) {
+               DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
        }
-       memset(&dev_link, 0, sizeof(dev_link));
-       dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
-                               (ifr.ifr_flags & IFF_RUNNING));
-       ifr.ifr_data = (void *)&edata;
-       if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
-               WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
-                    strerror(errno));
-               return -1;
+       dev_link = (struct rte_eth_link) {
+               .link_status = ((ifr.ifr_flags & IFF_UP) &&
+                               (ifr.ifr_flags & IFF_RUNNING)),
+       };
+       ifr = (struct ifreq) {
+               .ifr_data = (void *)&edata,
+       };
+       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       if (ret) {
+               DRV_LOG(WARNING,
+                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
        }
        link_speed = ethtool_cmd_speed(&edata);
        if (link_speed == -1)
-               dev_link.link_speed = 0;
+               dev_link.link_speed = ETH_SPEED_NUM_NONE;
        else
                dev_link.link_speed = link_speed;
        priv->link_speed_capa = 0;
@@ -783,13 +660,13 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, int wait_to_complete)
                                ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
        dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
                        ETH_LINK_SPEED_FIXED);
-       if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
-               /* Link status changed. */
-               dev->data->dev_link = dev_link;
-               return 0;
+       if (((dev_link.link_speed && !dev_link.link_status) ||
+            (!dev_link.link_speed && dev_link.link_status))) {
+               rte_errno = EAGAIN;
+               return -rte_errno;
        }
-       /* Link status is still the same. */
-       return -1;
+       *link = dev_link;
+       return 0;
 }
 
 /**
@@ -797,31 +674,44 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, int wait_to_complete)
  *
  * @param dev
  *   Pointer to Ethernet device structure.
- * @param wait_to_complete
- *   Wait for request completion (ignored).
+ * @param[out] link
+ *   Storage for current link status.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 static int
-mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
+mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
+                            struct rte_eth_link *link)
+
 {
-       struct priv *priv = mlx5_get_priv(dev);
+       struct priv *priv = dev->data->dev_private;
        struct ethtool_link_settings gcmd = { .cmd = ETHTOOL_GLINKSETTINGS };
        struct ifreq ifr;
        struct rte_eth_link dev_link;
        uint64_t sc;
+       int ret;
 
-       (void)wait_to_complete;
-       if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
-               WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
-               return -1;
+       ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
+       if (ret) {
+               DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
        }
-       memset(&dev_link, 0, sizeof(dev_link));
-       dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
-                               (ifr.ifr_flags & IFF_RUNNING));
-       ifr.ifr_data = (void *)&gcmd;
-       if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
-               DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
-                     strerror(errno));
-               return -1;
+       dev_link = (struct rte_eth_link) {
+               .link_status = ((ifr.ifr_flags & IFF_UP) &&
+                               (ifr.ifr_flags & IFF_RUNNING)),
+       };
+       ifr = (struct ifreq) {
+               .ifr_data = (void *)&gcmd,
+       };
+       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       if (ret) {
+               DRV_LOG(DEBUG,
+                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS)"
+                       " failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
        }
        gcmd.link_mode_masks_nwords = -gcmd.link_mode_masks_nwords;
 
@@ -832,60 +722,63 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
 
        *ecmd = gcmd;
        ifr.ifr_data = (void *)ecmd;
-       if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
-               DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
-                     strerror(errno));
-               return -1;
+       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       if (ret) {
+               DRV_LOG(DEBUG,
+                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS)"
+                       " failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
        }
        dev_link.link_speed = ecmd->speed;
        sc = ecmd->link_mode_masks[0] |
                ((uint64_t)ecmd->link_mode_masks[1] << 32);
        priv->link_speed_capa = 0;
-       if (sc & ETHTOOL_LINK_MODE_Autoneg_BIT)
+       if (sc & MLX5_BITSHIFT(ETHTOOL_LINK_MODE_Autoneg_BIT))
                priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
-       if (sc & (ETHTOOL_LINK_MODE_1000baseT_Full_BIT |
-                 ETHTOOL_LINK_MODE_1000baseKX_Full_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_1000baseT_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_1G;
-       if (sc & (ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT |
-                 ETHTOOL_LINK_MODE_10000baseKR_Full_BIT |
-                 ETHTOOL_LINK_MODE_10000baseR_FEC_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_10G;
-       if (sc & (ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT |
-                 ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_20G;
-       if (sc & (ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_40G;
-       if (sc & (ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_56G;
-       if (sc & (ETHTOOL_LINK_MODE_25000baseCR_Full_BIT |
-                 ETHTOOL_LINK_MODE_25000baseKR_Full_BIT |
-                 ETHTOOL_LINK_MODE_25000baseSR_Full_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseCR_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseKR_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseSR_Full_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_25G;
-       if (sc & (ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT |
-                 ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_50G;
-       if (sc & (ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT |
-                 ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT))
+       if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT) |
+                 MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT)))
                priv->link_speed_capa |= ETH_LINK_SPEED_100G;
        dev_link.link_duplex = ((ecmd->duplex == DUPLEX_HALF) ?
                                ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
        dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
                                  ETH_LINK_SPEED_FIXED);
-       if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
-               /* Link status changed. */
-               dev->data->dev_link = dev_link;
-               return 0;
+       if (((dev_link.link_speed && !dev_link.link_status) ||
+            (!dev_link.link_speed && dev_link.link_status))) {
+               rte_errno = EAGAIN;
+               return -rte_errno;
        }
-       /* Link status is still the same. */
-       return -1;
+       *link = dev_link;
+       return 0;
 }
 
 /**
@@ -894,20 +787,43 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
  * @param dev
  *   Pointer to Ethernet device structure.
  * @param wait_to_complete
- *   Wait for request completion (ignored).
+ *   Wait for request completion.
+ *
+ * @return
+ *   0 if link status was not updated, positive if it was, a negative errno
+ *   value otherwise and rte_errno is set.
  */
 int
 mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 {
-       struct utsname utsname;
-       int ver[3];
-
-       if (uname(&utsname) == -1 ||
-           sscanf(utsname.release, "%d.%d.%d",
-                  &ver[0], &ver[1], &ver[2]) != 3 ||
-           KERNEL_VERSION(ver[0], ver[1], ver[2]) < KERNEL_VERSION(4, 9, 0))
-               return mlx5_link_update_unlocked_gset(dev, wait_to_complete);
-       return mlx5_link_update_unlocked_gs(dev, wait_to_complete);
+       int ret;
+       struct rte_eth_link dev_link;
+       time_t start_time = time(NULL);
+
+       do {
+               ret = mlx5_link_update_unlocked_gs(dev, &dev_link);
+               if (ret)
+                       ret = mlx5_link_update_unlocked_gset(dev, &dev_link);
+               if (ret == 0)
+                       break;
+               /* Handle wait to complete situation. */
+               if (wait_to_complete && ret == -EAGAIN) {
+                       if (abs((int)difftime(time(NULL), start_time)) <
+                           MLX5_LINK_STATUS_TIMEOUT) {
+                               usleep(0);
+                               continue;
+                       } else {
+                               rte_errno = EBUSY;
+                               return -rte_errno;
+                       }
+               } else if (ret < 0) {
+                       return ret;
+               }
+       } while (wait_to_complete);
+       ret = !!memcmp(&dev->data->dev_link, &dev_link,
+                      sizeof(struct rte_eth_link));
+       dev->data->dev_link = dev_link;
+       return ret;
 }
 
 /**
@@ -919,42 +835,33 @@ mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
  *   New MTU.
  *
  * @return
- *   0 on success, negative errno value on failure.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
 mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 {
        struct priv *priv = dev->data->dev_private;
-       uint16_t kern_mtu;
-       int ret = 0;
-
-       if (mlx5_is_secondary())
-               return -E_RTE_SECONDARY;
+       uint16_t kern_mtu = 0;
+       int ret;
 
-       priv_lock(priv);
-       ret = priv_get_mtu(priv, &kern_mtu);
+       ret = mlx5_get_mtu(dev, &kern_mtu);
        if (ret)
-               goto out;
+               return ret;
        /* Set kernel interface MTU first. */
-       ret = priv_set_mtu(priv, mtu);
+       ret = mlx5_set_mtu(dev, mtu);
        if (ret)
-               goto out;
-       ret = priv_get_mtu(priv, &kern_mtu);
+               return ret;
+       ret = mlx5_get_mtu(dev, &kern_mtu);
        if (ret)
-               goto out;
+               return ret;
        if (kern_mtu == mtu) {
                priv->mtu = mtu;
-               DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
+               DRV_LOG(DEBUG, "port %u adapter MTU set to %u",
+                       dev->data->port_id, mtu);
+               return 0;
        }
-       priv_unlock(priv);
-       return 0;
-out:
-       ret = errno;
-       WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
-            strerror(ret));
-       priv_unlock(priv);
-       assert(ret >= 0);
-       return -ret;
+       rte_errno = EAGAIN;
+       return -rte_errno;
 }
 
 /**
@@ -966,31 +873,26 @@ out:
  *   Flow control output buffer.
  *
  * @return
- *   0 on success, negative errno value on failure.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
 mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 {
-       struct priv *priv = dev->data->dev_private;
        struct ifreq ifr;
        struct ethtool_pauseparam ethpause = {
                .cmd = ETHTOOL_GPAUSEPARAM
        };
        int ret;
 
-       if (mlx5_is_secondary())
-               return -E_RTE_SECONDARY;
-
        ifr.ifr_data = (void *)&ethpause;
-       priv_lock(priv);
-       if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
-               ret = errno;
-               WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
-                    " failed: %s",
-                    strerror(ret));
-               goto out;
+       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       if (ret) {
+               DRV_LOG(WARNING,
+                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM) failed:"
+                       " %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
        }
-
        fc_conf->autoneg = ethpause.autoneg;
        if (ethpause.rx_pause && ethpause.tx_pause)
                fc_conf->mode = RTE_FC_FULL;
@@ -1000,12 +902,7 @@ mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
                fc_conf->mode = RTE_FC_TX_PAUSE;
        else
                fc_conf->mode = RTE_FC_NONE;
-       ret = 0;
-
-out:
-       priv_unlock(priv);
-       assert(ret >= 0);
-       return -ret;
+       return 0;
 }
 
 /**
@@ -1017,21 +914,17 @@ out:
  *   Flow control parameters.
  *
  * @return
- *   0 on success, negative errno value on failure.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
 mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 {
-       struct priv *priv = dev->data->dev_private;
        struct ifreq ifr;
        struct ethtool_pauseparam ethpause = {
                .cmd = ETHTOOL_SPAUSEPARAM
        };
        int ret;
 
-       if (mlx5_is_secondary())
-               return -E_RTE_SECONDARY;
-
        ifr.ifr_data = (void *)&ethpause;
        ethpause.autoneg = fc_conf->autoneg;
        if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
@@ -1045,21 +938,15 @@ mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
                ethpause.tx_pause = 1;
        else
                ethpause.tx_pause = 0;
-
-       priv_lock(priv);
-       if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
-               ret = errno;
-               WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
-                    " failed: %s",
-                    strerror(ret));
-               goto out;
+       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       if (ret) {
+               DRV_LOG(WARNING,
+                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+                       " failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
        }
-       ret = 0;
-
-out:
-       priv_unlock(priv);
-       assert(ret >= 0);
-       return -ret;
+       return 0;
 }
 
 /**
@@ -1071,7 +958,7 @@ out:
  *   PCI bus address output buffer.
  *
  * @return
- *   0 on success, -1 on failure and errno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
 mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
@@ -1082,8 +969,10 @@ mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
        MKSTR(path, "%s/device/uevent", device->ibdev_path);
 
        file = fopen(path, "rb");
-       if (file == NULL)
-               return -1;
+       if (file == NULL) {
+               rte_errno = errno;
+               return -rte_errno;
+       }
        while (fgets(line, sizeof(line), file) == line) {
                size_t len = strlen(line);
                int ret;
@@ -1112,47 +1001,11 @@ mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
        return 0;
 }
 
-/**
- * Update the link status.
- *
- * @param priv
- *   Pointer to private structure.
- *
- * @return
- *   Zero if the callback process can be called immediately.
- */
-static int
-priv_link_status_update(struct priv *priv)
-{
-       struct rte_eth_link *link = &priv->dev->data->dev_link;
-
-       mlx5_link_update(priv->dev, 0);
-       if (((link->link_speed == 0) && link->link_status) ||
-               ((link->link_speed != 0) && !link->link_status)) {
-               /*
-                * Inconsistent status. Event likely occurred before the
-                * kernel netdevice exposes the new status.
-                */
-               if (!priv->pending_alarm) {
-                       priv->pending_alarm = 1;
-                       rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
-                                         mlx5_dev_link_status_handler,
-                                         priv->dev);
-               }
-               return 1;
-       } else if (unlikely(priv->pending_alarm)) {
-               /* Link interrupt occurred while alarm is already scheduled. */
-               priv->pending_alarm = 0;
-               rte_eal_alarm_cancel(mlx5_dev_link_status_handler, priv->dev);
-       }
-       return 0;
-}
-
 /**
  * Device status handler.
  *
- * @param priv
- *   Pointer to private structure.
+ * @param dev
+ *   Pointer to Ethernet device.
  * @param events
  *   Pointer to event flags holder.
  *
@@ -1160,248 +1013,354 @@ priv_link_status_update(struct priv *priv)
  *   Events bitmap of callback process which can be called immediately.
  */
 static uint32_t
-priv_dev_status_handler(struct priv *priv)
+mlx5_dev_status_handler(struct rte_eth_dev *dev)
 {
+       struct priv *priv = dev->data->dev_private;
        struct ibv_async_event event;
        uint32_t ret = 0;
 
+       if (mlx5_link_update(dev, 0) == -EAGAIN) {
+               usleep(0);
+               return 0;
+       }
        /* Read all message and acknowledge them. */
        for (;;) {
-               if (ibv_get_async_event(priv->ctx, &event))
+               if (mlx5_glue->get_async_event(priv->ctx, &event))
                        break;
                if ((event.event_type == IBV_EVENT_PORT_ACTIVE ||
                        event.event_type == IBV_EVENT_PORT_ERR) &&
-                       (priv->dev->data->dev_conf.intr_conf.lsc == 1))
+                       (dev->data->dev_conf.intr_conf.lsc == 1))
                        ret |= (1 << RTE_ETH_EVENT_INTR_LSC);
+               else if (event.event_type == IBV_EVENT_DEVICE_FATAL &&
+                       dev->data->dev_conf.intr_conf.rmv == 1)
+                       ret |= (1 << RTE_ETH_EVENT_INTR_RMV);
                else
-                       DEBUG("event type %d on port %d not handled",
-                             event.event_type, event.element.port_num);
-               ibv_ack_async_event(&event);
+                       DRV_LOG(DEBUG,
+                               "port %u event type %d on not handled",
+                               dev->data->port_id, event.event_type);
+               mlx5_glue->ack_async_event(&event);
        }
-       if (ret & (1 << RTE_ETH_EVENT_INTR_LSC))
-               if (priv_link_status_update(priv))
-                       ret &= ~(1 << RTE_ETH_EVENT_INTR_LSC);
        return ret;
 }
 
 /**
- * Handle delayed link status event.
+ * Handle interrupts from the NIC.
  *
- * @param arg
- *   Registered argument.
+ * @param[in] intr_handle
+ *   Interrupt handler.
+ * @param cb_arg
+ *   Callback argument.
  */
 void
-mlx5_dev_link_status_handler(void *arg)
+mlx5_dev_interrupt_handler(void *cb_arg)
 {
-       struct rte_eth_dev *dev = arg;
-       struct priv *priv = dev->data->dev_private;
-       int ret;
+       struct rte_eth_dev *dev = cb_arg;
+       uint32_t events;
 
-       priv_lock(priv);
-       assert(priv->pending_alarm == 1);
-       priv->pending_alarm = 0;
-       ret = priv_link_status_update(priv);
-       priv_unlock(priv);
-       if (!ret)
-               _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL,
-                                             NULL);
+       events = mlx5_dev_status_handler(dev);
+       if (events & (1 << RTE_ETH_EVENT_INTR_LSC))
+               _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+       if (events & (1 << RTE_ETH_EVENT_INTR_RMV))
+               _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RMV, NULL);
 }
 
 /**
- * Handle interrupts from the NIC.
+ * Handle interrupts from the socket.
  *
- * @param[in] intr_handle
- *   Interrupt handler.
  * @param cb_arg
  *   Callback argument.
  */
-void
-mlx5_dev_interrupt_handler(void *cb_arg)
+static void
+mlx5_dev_handler_socket(void *cb_arg)
 {
        struct rte_eth_dev *dev = cb_arg;
-       struct priv *priv = dev->data->dev_private;
-       uint32_t events;
 
-       priv_lock(priv);
-       events = priv_dev_status_handler(priv);
-       priv_unlock(priv);
-       if (events & (1 << RTE_ETH_EVENT_INTR_LSC))
-               _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL,
-                                             NULL);
+       mlx5_socket_handle(dev);
 }
 
 /**
  * Uninstall interrupt handler.
  *
- * @param priv
- *   Pointer to private structure.
  * @param dev
- *   Pointer to the rte_eth_dev structure.
+ *   Pointer to Ethernet device.
  */
 void
-priv_dev_interrupt_handler_uninstall(struct priv *priv, struct rte_eth_dev *dev)
+mlx5_dev_interrupt_handler_uninstall(struct rte_eth_dev *dev)
 {
-       if (!dev->data->dev_conf.intr_conf.lsc)
-               return;
-       rte_intr_callback_unregister(&priv->intr_handle,
-                                    mlx5_dev_interrupt_handler,
-                                    dev);
-       if (priv->pending_alarm)
-               rte_eal_alarm_cancel(mlx5_dev_link_status_handler, dev);
-       priv->pending_alarm = 0;
+       struct priv *priv = dev->data->dev_private;
+
+       if (dev->data->dev_conf.intr_conf.lsc ||
+           dev->data->dev_conf.intr_conf.rmv)
+               rte_intr_callback_unregister(&priv->intr_handle,
+                                            mlx5_dev_interrupt_handler, dev);
+       if (priv->primary_socket)
+               rte_intr_callback_unregister(&priv->intr_handle_socket,
+                                            mlx5_dev_handler_socket, dev);
        priv->intr_handle.fd = 0;
        priv->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
+       priv->intr_handle_socket.fd = 0;
+       priv->intr_handle_socket.type = RTE_INTR_HANDLE_UNKNOWN;
 }
 
 /**
  * Install interrupt handler.
  *
- * @param priv
- *   Pointer to private structure.
  * @param dev
- *   Pointer to the rte_eth_dev structure.
+ *   Pointer to Ethernet device.
  */
 void
-priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
+mlx5_dev_interrupt_handler_install(struct rte_eth_dev *dev)
 {
-       int rc, flags;
+       struct priv *priv = dev->data->dev_private;
+       int ret;
+       int flags;
 
-       if (!dev->data->dev_conf.intr_conf.lsc)
-               return;
        assert(priv->ctx->async_fd > 0);
        flags = fcntl(priv->ctx->async_fd, F_GETFL);
-       rc = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
-       if (rc < 0) {
-               INFO("failed to change file descriptor async event queue");
+       ret = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
+       if (ret) {
+               DRV_LOG(INFO,
+                       "port %u failed to change file descriptor async event"
+                       " queue",
+                       dev->data->port_id);
                dev->data->dev_conf.intr_conf.lsc = 0;
-       } else {
+               dev->data->dev_conf.intr_conf.rmv = 0;
+       }
+       if (dev->data->dev_conf.intr_conf.lsc ||
+           dev->data->dev_conf.intr_conf.rmv) {
                priv->intr_handle.fd = priv->ctx->async_fd;
                priv->intr_handle.type = RTE_INTR_HANDLE_EXT;
                rte_intr_callback_register(&priv->intr_handle,
-                                          mlx5_dev_interrupt_handler,
-                                          dev);
+                                          mlx5_dev_interrupt_handler, dev);
+       }
+       ret = mlx5_socket_init(dev);
+       if (ret)
+               DRV_LOG(ERR, "port %u cannot initialise socket: %s",
+                       dev->data->port_id, strerror(rte_errno));
+       else if (priv->primary_socket) {
+               priv->intr_handle_socket.fd = priv->primary_socket;
+               priv->intr_handle_socket.type = RTE_INTR_HANDLE_EXT;
+               rte_intr_callback_register(&priv->intr_handle_socket,
+                                          mlx5_dev_handler_socket, dev);
        }
 }
 
 /**
- * Change the link state (UP / DOWN).
+ * DPDK callback to bring the link DOWN.
  *
- * @param priv
+ * @param dev
  *   Pointer to Ethernet device structure.
- * @param up
- *   Nonzero for link up, otherwise link down.
  *
  * @return
- *   0 on success, errno value on failure.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
-static int
-priv_set_link(struct priv *priv, int up)
+int
+mlx5_set_link_down(struct rte_eth_dev *dev)
 {
-       struct rte_eth_dev *dev = priv->dev;
-       int err;
-
-       if (up) {
-               err = priv_set_flags(priv, ~IFF_UP, IFF_UP);
-               if (err)
-                       return err;
-               priv_select_tx_function(priv);
-               priv_select_rx_function(priv);
-       } else {
-               err = priv_set_flags(priv, ~IFF_UP, ~IFF_UP);
-               if (err)
-                       return err;
-               dev->rx_pkt_burst = removed_rx_burst;
-               dev->tx_pkt_burst = removed_tx_burst;
-       }
-       return 0;
+       return mlx5_set_flags(dev, ~IFF_UP, ~IFF_UP);
 }
 
 /**
- * DPDK callback to bring the link DOWN.
+ * DPDK callback to bring the link UP.
  *
  * @param dev
  *   Pointer to Ethernet device structure.
  *
  * @return
- *   0 on success, errno value on failure.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 int
-mlx5_set_link_down(struct rte_eth_dev *dev)
+mlx5_set_link_up(struct rte_eth_dev *dev)
+{
+       return mlx5_set_flags(dev, ~IFF_UP, IFF_UP);
+}
+
+/**
+ * Configure the TX function to use.
+ *
+ * @param dev
+ *   Pointer to private data structure.
+ *
+ * @return
+ *   Pointer to selected Tx burst function.
+ */
+eth_tx_burst_t
+mlx5_select_tx_function(struct rte_eth_dev *dev)
 {
        struct priv *priv = dev->data->dev_private;
-       int err;
+       eth_tx_burst_t tx_pkt_burst = mlx5_tx_burst;
+       struct mlx5_dev_config *config = &priv->config;
+       uint64_t tx_offloads = dev->data->dev_conf.txmode.offloads;
+       int tso = !!(tx_offloads & (DEV_TX_OFFLOAD_TCP_TSO |
+                                   DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+                                   DEV_TX_OFFLOAD_GRE_TNL_TSO |
+                                   DEV_TX_OFFLOAD_IP_TNL_TSO |
+                                   DEV_TX_OFFLOAD_UDP_TNL_TSO));
+       int swp = !!(tx_offloads & (DEV_TX_OFFLOAD_IP_TNL_TSO |
+                                   DEV_TX_OFFLOAD_UDP_TNL_TSO |
+                                   DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM));
+       int vlan_insert = !!(tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT);
+
+       assert(priv != NULL);
+       /* Select appropriate TX function. */
+       if (vlan_insert || tso || swp)
+               return tx_pkt_burst;
+       if (config->mps == MLX5_MPW_ENHANCED) {
+               if (mlx5_check_vec_tx_support(dev) > 0) {
+                       if (mlx5_check_raw_vec_tx_support(dev) > 0)
+                               tx_pkt_burst = mlx5_tx_burst_raw_vec;
+                       else
+                               tx_pkt_burst = mlx5_tx_burst_vec;
+                       DRV_LOG(DEBUG,
+                               "port %u selected enhanced MPW Tx vectorized"
+                               " function",
+                               dev->data->port_id);
+               } else {
+                       tx_pkt_burst = mlx5_tx_burst_empw;
+                       DRV_LOG(DEBUG,
+                               "port %u selected enhanced MPW Tx function",
+                               dev->data->port_id);
+               }
+       } else if (config->mps && (config->txq_inline > 0)) {
+               tx_pkt_burst = mlx5_tx_burst_mpw_inline;
+               DRV_LOG(DEBUG, "port %u selected MPW inline Tx function",
+                       dev->data->port_id);
+       } else if (config->mps) {
+               tx_pkt_burst = mlx5_tx_burst_mpw;
+               DRV_LOG(DEBUG, "port %u selected MPW Tx function",
+                       dev->data->port_id);
+       }
+       return tx_pkt_burst;
+}
 
-       priv_lock(priv);
-       err = priv_set_link(priv, 0);
-       priv_unlock(priv);
-       return err;
+/**
+ * Configure the RX function to use.
+ *
+ * @param dev
+ *   Pointer to private data structure.
+ *
+ * @return
+ *   Pointer to selected Rx burst function.
+ */
+eth_rx_burst_t
+mlx5_select_rx_function(struct rte_eth_dev *dev)
+{
+       eth_rx_burst_t rx_pkt_burst = mlx5_rx_burst;
+
+       assert(dev != NULL);
+       if (mlx5_check_vec_rx_support(dev) > 0) {
+               rx_pkt_burst = mlx5_rx_burst_vec;
+               DRV_LOG(DEBUG, "port %u selected Rx vectorized function",
+                       dev->data->port_id);
+       } else if (mlx5_mprq_enabled(dev)) {
+               rx_pkt_burst = mlx5_rx_burst_mprq;
+       }
+       return rx_pkt_burst;
 }
 
 /**
- * DPDK callback to bring the link UP.
+ * Check if mlx5 device was removed.
  *
  * @param dev
  *   Pointer to Ethernet device structure.
  *
  * @return
- *   0 on success, errno value on failure.
+ *   1 when device is removed, otherwise 0.
  */
 int
-mlx5_set_link_up(struct rte_eth_dev *dev)
+mlx5_is_removed(struct rte_eth_dev *dev)
 {
+       struct ibv_device_attr device_attr;
        struct priv *priv = dev->data->dev_private;
-       int err;
 
-       priv_lock(priv);
-       err = priv_set_link(priv, 1);
-       priv_unlock(priv);
-       return err;
+       if (mlx5_glue->query_device(priv->ctx, &device_attr) == EIO)
+               return 1;
+       return 0;
 }
 
 /**
- * Configure the TX function to use.
+ * Get port ID list of mlx5 instances sharing a common device.
+ *
+ * @param[in] dev
+ *   Device to look for.
+ * @param[out] port_list
+ *   Result buffer for collected port IDs.
+ * @param port_list_n
+ *   Maximum number of entries in result buffer. If 0, @p port_list can be
+ *   NULL.
  *
- * @param priv
- *   Pointer to private structure.
+ * @return
+ *   Number of matching instances regardless of the @p port_list_n
+ *   parameter, 0 if none were found.
  */
-void
-priv_select_tx_function(struct priv *priv)
+unsigned int
+mlx5_dev_to_port_id(const struct rte_device *dev, uint16_t *port_list,
+                   unsigned int port_list_n)
 {
-       priv->dev->tx_pkt_burst = mlx5_tx_burst;
-       /* Select appropriate TX function. */
-       if (priv->mps == MLX5_MPW_ENHANCED) {
-               if (priv_check_vec_tx_support(priv) > 0) {
-                       if (priv_check_raw_vec_tx_support(priv) > 0)
-                               priv->dev->tx_pkt_burst = mlx5_tx_burst_raw_vec;
-                       else
-                               priv->dev->tx_pkt_burst = mlx5_tx_burst_vec;
-                       DEBUG("selected Enhanced MPW TX vectorized function");
-               } else {
-                       priv->dev->tx_pkt_burst = mlx5_tx_burst_empw;
-                       DEBUG("selected Enhanced MPW TX function");
-               }
-       } else if (priv->mps && priv->txq_inline) {
-               priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline;
-               DEBUG("selected MPW inline TX function");
-       } else if (priv->mps) {
-               priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw;
-               DEBUG("selected MPW TX function");
+       uint16_t id;
+       unsigned int n = 0;
+
+       RTE_ETH_FOREACH_DEV(id) {
+               struct rte_eth_dev *ldev = &rte_eth_devices[id];
+
+               if (ldev->device != dev)
+                       continue;
+               if (n < port_list_n)
+                       port_list[n] = id;
+               n++;
        }
+       return n;
 }
 
 /**
- * Configure the RX function to use.
+ * Get switch information associated with network interface.
+ *
+ * @param ifindex
+ *   Network interface index.
+ * @param[out] info
+ *   Switch information object, populated in case of success.
  *
- * @param priv
- *   Pointer to private structure.
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
-void
-priv_select_rx_function(struct priv *priv)
+int
+mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info *info)
 {
-       if (priv_check_vec_rx_support(priv) > 0) {
-               priv->dev->rx_pkt_burst = mlx5_rx_burst_vec;
-               DEBUG("selected RX vectorized function");
-       } else {
-               priv->dev->rx_pkt_burst = mlx5_rx_burst;
+       char ifname[IF_NAMESIZE];
+       FILE *file;
+       struct mlx5_switch_info data = { .master = 0, };
+       bool port_name_set = false;
+       bool port_switch_id_set = false;
+       char c;
+
+       if (!if_indextoname(ifindex, ifname)) {
+               rte_errno = errno;
+               return -rte_errno;
        }
+
+       MKSTR(phys_port_name, "/sys/class/net/%s/phys_port_name",
+             ifname);
+       MKSTR(phys_switch_id, "/sys/class/net/%s/phys_switch_id",
+             ifname);
+
+       file = fopen(phys_port_name, "rb");
+       if (file != NULL) {
+               port_name_set =
+                       fscanf(file, "%d%c", &data.port_name, &c) == 2 &&
+                       c == '\n';
+               fclose(file);
+       }
+       file = fopen(phys_switch_id, "rb");
+       if (file == NULL) {
+               rte_errno = errno;
+               return -rte_errno;
+       }
+       port_switch_id_set =
+               fscanf(file, "%" SCNx64 "%c", &data.switch_id, &c) == 2 &&
+               c == '\n';
+       fclose(file);
+       data.master = port_switch_id_set && !port_name_set;
+       data.representor = port_switch_id_set && port_name_set;
+       *info = data;
+       return 0;
 }