net/mlx5: add port representor awareness
[dpdk.git] / drivers / net / mlx5 / mlx5_nl.c
index dca8583..008cd2c 100644 (file)
@@ -3,10 +3,21 @@
  * Copyright 2018 Mellanox Technologies, Ltd
  */
 
+#include <errno.h>
+#include <linux/if_link.h>
 #include <linux/netlink.h>
 #include <linux/rtnetlink.h>
+#include <net/if.h>
+#include <rdma/rdma_netlink.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
 #include <unistd.h>
 
+#include <rte_errno.h>
+
 #include "mlx5.h"
 #include "mlx5_utils.h"
 
        ((struct rtattr *)(((char *)(r)) + NLMSG_ALIGN(sizeof(struct ndmsg))))
 #endif
 
+/*
+ * The following definitions are normally found in rdma/rdma_netlink.h,
+ * however they are so recent that most systems do not expose them yet.
+ */
+#ifndef HAVE_RDMA_NL_NLDEV
+#define RDMA_NL_NLDEV 5
+#endif
+#ifndef HAVE_RDMA_NLDEV_CMD_GET
+#define RDMA_NLDEV_CMD_GET 1
+#endif
+#ifndef HAVE_RDMA_NLDEV_CMD_PORT_GET
+#define RDMA_NLDEV_CMD_PORT_GET 5
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_INDEX
+#define RDMA_NLDEV_ATTR_DEV_INDEX 1
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_NAME
+#define RDMA_NLDEV_ATTR_DEV_NAME 2
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_PORT_INDEX
+#define RDMA_NLDEV_ATTR_PORT_INDEX 3
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_NDEV_INDEX
+#define RDMA_NLDEV_ATTR_NDEV_INDEX 50
+#endif
+
+/* These are normally found in linux/if_link.h. */
+#ifndef HAVE_IFLA_PHYS_SWITCH_ID
+#define IFLA_PHYS_SWITCH_ID 36
+#endif
+#ifndef HAVE_IFLA_PHYS_PORT_NAME
+#define IFLA_PHYS_PORT_NAME 38
+#endif
+
 /* Add/remove MAC address through Netlink */
 struct mlx5_nl_mac_addr {
        struct ether_addr (*mac)[];
@@ -34,18 +79,27 @@ struct mlx5_nl_mac_addr {
        int mac_n; /**< Number of addresses in the array. */
 };
 
+/** Data structure used by mlx5_nl_ifindex_cb(). */
+struct mlx5_nl_ifindex_data {
+       const char *name; /**< IB device name (in). */
+       uint32_t ibindex; /**< IB device index (out). */
+       uint32_t ifindex; /**< Network interface index (out). */
+};
+
 /**
  * Opens a Netlink socket.
  *
  * @param nl_groups
  *   Netlink group value (e.g. RTMGRP_LINK).
+ * @param protocol
+ *   Netlink protocol (e.g. NETLINK_ROUTE, NETLINK_RDMA).
  *
  * @return
  *   A file descriptor on success, a negative errno value otherwise and
  *   rte_errno is set.
  */
 int
-mlx5_nl_init(uint32_t nl_groups)
+mlx5_nl_init(uint32_t nl_groups, int protocol)
 {
        int fd;
        int sndbuf_size = MLX5_SEND_BUF_SIZE;
@@ -56,7 +110,7 @@ mlx5_nl_init(uint32_t nl_groups)
        };
        int ret;
 
-       fd = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, NETLINK_ROUTE);
+       fd = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, protocol);
        if (fd == -1) {
                rte_errno = errno;
                return -rte_errno;
@@ -334,9 +388,9 @@ mlx5_nl_mac_addr_list(struct rte_eth_dev *dev, struct ether_addr (*mac)[],
        int ret;
        uint32_t sn = priv->nl_sn++;
 
-       if (priv->nl_socket == -1)
+       if (priv->nl_socket_route == -1)
                return 0;
-       fd = priv->nl_socket;
+       fd = priv->nl_socket_route;
        ret = mlx5_nl_request(fd, &req.hdr, sn, &req.ifm,
                              sizeof(struct ifinfomsg));
        if (ret < 0)
@@ -398,9 +452,9 @@ mlx5_nl_mac_addr_modify(struct rte_eth_dev *dev, struct ether_addr *mac,
        int ret;
        uint32_t sn = priv->nl_sn++;
 
-       if (priv->nl_socket == -1)
+       if (priv->nl_socket_route == -1)
                return 0;
-       fd = priv->nl_socket;
+       fd = priv->nl_socket_route;
        memcpy(RTA_DATA(&req.rta), mac, ETHER_ADDR_LEN);
        req.hdr.nlmsg_len = NLMSG_ALIGN(req.hdr.nlmsg_len) +
                RTA_ALIGN(req.rta.rta_len);
@@ -569,9 +623,9 @@ mlx5_nl_device_flags(struct rte_eth_dev *dev, uint32_t flags, int enable)
        int ret;
 
        assert(!(flags & ~(IFF_PROMISC | IFF_ALLMULTI)));
-       if (priv->nl_socket < 0)
+       if (priv->nl_socket_route < 0)
                return 0;
-       fd = priv->nl_socket;
+       fd = priv->nl_socket_route;
        ret = mlx5_nl_send(fd, &req.hdr, priv->nl_sn++);
        if (ret < 0)
                return ret;
@@ -625,3 +679,241 @@ mlx5_nl_allmulti(struct rte_eth_dev *dev, int enable)
                        strerror(rte_errno));
        return ret;
 }
+
+/**
+ * Process network interface information from Netlink message.
+ *
+ * @param nh
+ *   Pointer to Netlink message header.
+ * @param arg
+ *   Opaque data pointer for this callback.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_ifindex_cb(struct nlmsghdr *nh, void *arg)
+{
+       struct mlx5_nl_ifindex_data *data = arg;
+       size_t off = NLMSG_HDRLEN;
+       uint32_t ibindex = 0;
+       uint32_t ifindex = 0;
+       int found = 0;
+
+       if (nh->nlmsg_type !=
+           RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_GET) &&
+           nh->nlmsg_type !=
+           RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_PORT_GET))
+               goto error;
+       while (off < nh->nlmsg_len) {
+               struct nlattr *na = (void *)((uintptr_t)nh + off);
+               void *payload = (void *)((uintptr_t)na + NLA_HDRLEN);
+
+               if (na->nla_len > nh->nlmsg_len - off)
+                       goto error;
+               switch (na->nla_type) {
+               case RDMA_NLDEV_ATTR_DEV_INDEX:
+                       ibindex = *(uint32_t *)payload;
+                       break;
+               case RDMA_NLDEV_ATTR_DEV_NAME:
+                       if (!strcmp(payload, data->name))
+                               found = 1;
+                       break;
+               case RDMA_NLDEV_ATTR_NDEV_INDEX:
+                       ifindex = *(uint32_t *)payload;
+                       break;
+               default:
+                       break;
+               }
+               off += NLA_ALIGN(na->nla_len);
+       }
+       if (found) {
+               data->ibindex = ibindex;
+               data->ifindex = ifindex;
+       }
+       return 0;
+error:
+       rte_errno = EINVAL;
+       return -rte_errno;
+}
+
+/**
+ * Get index of network interface associated with some IB device.
+ *
+ * This is the only somewhat safe method to avoid resorting to heuristics
+ * when faced with port representors. Unfortunately it requires at least
+ * Linux 4.17.
+ *
+ * @param nl
+ *   Netlink socket of the RDMA kind (NETLINK_RDMA).
+ * @param[in] name
+ *   IB device name.
+ *
+ * @return
+ *   A valid (nonzero) interface index on success, 0 otherwise and rte_errno
+ *   is set.
+ */
+unsigned int
+mlx5_nl_ifindex(int nl, const char *name)
+{
+       static const uint32_t pindex = 1;
+       uint32_t seq = random();
+       struct mlx5_nl_ifindex_data data = {
+               .name = name,
+               .ibindex = 0, /* Determined during first pass. */
+               .ifindex = 0, /* Determined during second pass. */
+       };
+       union {
+               struct nlmsghdr nh;
+               uint8_t buf[NLMSG_HDRLEN +
+                           NLA_HDRLEN + NLA_ALIGN(sizeof(data.ibindex)) +
+                           NLA_HDRLEN + NLA_ALIGN(sizeof(pindex))];
+       } req = {
+               .nh = {
+                       .nlmsg_len = NLMSG_LENGTH(0),
+                       .nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+                                                      RDMA_NLDEV_CMD_GET),
+                       .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP,
+               },
+       };
+       struct nlattr *na;
+       int ret;
+
+       ret = mlx5_nl_send(nl, &req.nh, seq);
+       if (ret < 0)
+               return 0;
+       ret = mlx5_nl_recv(nl, seq, mlx5_nl_ifindex_cb, &data);
+       if (ret < 0)
+               return 0;
+       if (!data.ibindex)
+               goto error;
+       ++seq;
+       req.nh.nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+                                            RDMA_NLDEV_CMD_PORT_GET);
+       req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+       req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.buf) - NLMSG_HDRLEN);
+       na = (void *)((uintptr_t)req.buf + NLMSG_HDRLEN);
+       na->nla_len = NLA_HDRLEN + sizeof(data.ibindex);
+       na->nla_type = RDMA_NLDEV_ATTR_DEV_INDEX;
+       memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
+              &data.ibindex, sizeof(data.ibindex));
+       na = (void *)((uintptr_t)na + NLA_ALIGN(na->nla_len));
+       na->nla_len = NLA_HDRLEN + sizeof(pindex);
+       na->nla_type = RDMA_NLDEV_ATTR_PORT_INDEX;
+       memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
+              &pindex, sizeof(pindex));
+       ret = mlx5_nl_send(nl, &req.nh, seq);
+       if (ret < 0)
+               return 0;
+       ret = mlx5_nl_recv(nl, seq, mlx5_nl_ifindex_cb, &data);
+       if (ret < 0)
+               return 0;
+       if (!data.ifindex)
+               goto error;
+       return data.ifindex;
+error:
+       rte_errno = ENODEV;
+       return 0;
+}
+
+/**
+ * Process switch information from Netlink message.
+ *
+ * @param nh
+ *   Pointer to Netlink message header.
+ * @param arg
+ *   Opaque data pointer for this callback.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_switch_info_cb(struct nlmsghdr *nh, void *arg)
+{
+       struct mlx5_switch_info info = {
+               .master = 0,
+               .representor = 0,
+               .port_name = 0,
+               .switch_id = 0,
+       };
+       size_t off = NLMSG_LENGTH(sizeof(struct ifinfomsg));
+       bool port_name_set = false;
+       bool switch_id_set = false;
+
+       if (nh->nlmsg_type != RTM_NEWLINK)
+               goto error;
+       while (off < nh->nlmsg_len) {
+               struct rtattr *ra = (void *)((uintptr_t)nh + off);
+               void *payload = RTA_DATA(ra);
+               char *end;
+               unsigned int i;
+
+               if (ra->rta_len > nh->nlmsg_len - off)
+                       goto error;
+               switch (ra->rta_type) {
+               case IFLA_PHYS_PORT_NAME:
+                       errno = 0;
+                       info.port_name = strtol(payload, &end, 0);
+                       if (errno ||
+                           (size_t)(end - (char *)payload) != strlen(payload))
+                               goto error;
+                       port_name_set = true;
+                       break;
+               case IFLA_PHYS_SWITCH_ID:
+                       info.switch_id = 0;
+                       for (i = 0; i < RTA_PAYLOAD(ra); ++i) {
+                               info.switch_id <<= 8;
+                               info.switch_id |= ((uint8_t *)payload)[i];
+                       }
+                       switch_id_set = true;
+                       break;
+               }
+               off += RTA_ALIGN(ra->rta_len);
+       }
+       info.master = switch_id_set && !port_name_set;
+       info.representor = switch_id_set && port_name_set;
+       memcpy(arg, &info, sizeof(info));
+       return 0;
+error:
+       rte_errno = EINVAL;
+       return -rte_errno;
+}
+
+/**
+ * Get switch information associated with network interface.
+ *
+ * @param nl
+ *   Netlink socket of the ROUTE kind (NETLINK_ROUTE).
+ * @param ifindex
+ *   Network interface index.
+ * @param[out] info
+ *   Switch information object, populated in case of success.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_switch_info(int nl, unsigned int ifindex, struct mlx5_switch_info *info)
+{
+       uint32_t seq = random();
+       struct {
+               struct nlmsghdr nh;
+               struct ifinfomsg info;
+       } req = {
+               .nh = {
+                       .nlmsg_len = NLMSG_LENGTH(sizeof(req.info)),
+                       .nlmsg_type = RTM_GETLINK,
+                       .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
+               },
+               .info = {
+                       .ifi_family = AF_UNSPEC,
+                       .ifi_index = ifindex,
+               },
+       };
+       int ret;
+
+       ret = mlx5_nl_send(nl, &req.nh, seq);
+       if (ret >= 0)
+               ret = mlx5_nl_recv(nl, seq, mlx5_nl_switch_info_cb, info);
+       return ret;
+}