* Copyright 2018 Mellanox Technologies, Ltd
*/
+#include <errno.h>
+#include <linux/if_link.h>
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
+#include <net/if.h>
+#include <rdma/rdma_netlink.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
#include <unistd.h>
+#include <rte_errno.h>
+
#include "mlx5.h"
#include "mlx5_utils.h"
((struct rtattr *)(((char *)(r)) + NLMSG_ALIGN(sizeof(struct ndmsg))))
#endif
+/*
+ * The following definitions are normally found in rdma/rdma_netlink.h,
+ * however they are so recent that most systems do not expose them yet.
+ */
+#ifndef HAVE_RDMA_NL_NLDEV
+#define RDMA_NL_NLDEV 5
+#endif
+#ifndef HAVE_RDMA_NLDEV_CMD_GET
+#define RDMA_NLDEV_CMD_GET 1
+#endif
+#ifndef HAVE_RDMA_NLDEV_CMD_PORT_GET
+#define RDMA_NLDEV_CMD_PORT_GET 5
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_INDEX
+#define RDMA_NLDEV_ATTR_DEV_INDEX 1
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_NAME
+#define RDMA_NLDEV_ATTR_DEV_NAME 2
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_PORT_INDEX
+#define RDMA_NLDEV_ATTR_PORT_INDEX 3
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_NDEV_INDEX
+#define RDMA_NLDEV_ATTR_NDEV_INDEX 50
+#endif
+
+/* These are normally found in linux/if_link.h. */
+#ifndef HAVE_IFLA_NUM_VF
+#define IFLA_NUM_VF 21
+#endif
+#ifndef HAVE_IFLA_EXT_MASK
+#define IFLA_EXT_MASK 29
+#endif
+#ifndef HAVE_IFLA_PHYS_SWITCH_ID
+#define IFLA_PHYS_SWITCH_ID 36
+#endif
+#ifndef HAVE_IFLA_PHYS_PORT_NAME
+#define IFLA_PHYS_PORT_NAME 38
+#endif
+
/* Add/remove MAC address through Netlink */
struct mlx5_nl_mac_addr {
- struct ether_addr (*mac)[];
+ struct rte_ether_addr (*mac)[];
/**< MAC address handled by the device. */
int mac_n; /**< Number of addresses in the array. */
};
+/** Data structure used by mlx5_nl_cmdget_cb(). */
+struct mlx5_nl_ifindex_data {
+ const char *name; /**< IB device name (in). */
+ uint32_t ibindex; /**< IB device index (out). */
+ uint32_t ifindex; /**< Network interface index (out). */
+ uint32_t portnum; /**< IB device max port number. */
+};
+
/**
* Opens a Netlink socket.
*
- * @param nl_groups
- * Netlink group value (e.g. RTMGRP_LINK).
+ * @param protocol
+ * Netlink protocol (e.g. NETLINK_ROUTE, NETLINK_RDMA).
*
* @return
* A file descriptor on success, a negative errno value otherwise and
* rte_errno is set.
*/
int
-mlx5_nl_init(uint32_t nl_groups)
+mlx5_nl_init(int protocol)
{
int fd;
int sndbuf_size = MLX5_SEND_BUF_SIZE;
int rcvbuf_size = MLX5_RECV_BUF_SIZE;
struct sockaddr_nl local = {
.nl_family = AF_NETLINK,
- .nl_groups = nl_groups,
};
int ret;
- fd = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, NETLINK_ROUTE);
+ fd = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, protocol);
if (fd == -1) {
rte_errno = errno;
return -rte_errno;
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_nl_mac_addr_list(struct rte_eth_dev *dev, struct ether_addr (*mac)[],
+mlx5_nl_mac_addr_list(struct rte_eth_dev *dev, struct rte_ether_addr (*mac)[],
int *mac_n)
{
- struct priv *priv = dev->data->dev_private;
- int iface_idx = mlx5_ifindex(dev);
+ struct mlx5_priv *priv = dev->data->dev_private;
+ unsigned int iface_idx = mlx5_ifindex(dev);
struct {
struct nlmsghdr hdr;
struct ifinfomsg ifm;
int ret;
uint32_t sn = priv->nl_sn++;
- if (priv->nl_socket == -1)
+ if (priv->nl_socket_route == -1)
return 0;
- fd = priv->nl_socket;
+ fd = priv->nl_socket_route;
ret = mlx5_nl_request(fd, &req.hdr, sn, &req.ifm,
sizeof(struct ifinfomsg));
if (ret < 0)
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_nl_mac_addr_modify(struct rte_eth_dev *dev, struct ether_addr *mac,
+mlx5_nl_mac_addr_modify(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
int add)
{
- struct priv *priv = dev->data->dev_private;
- int iface_idx = mlx5_ifindex(dev);
+ struct mlx5_priv *priv = dev->data->dev_private;
+ unsigned int iface_idx = mlx5_ifindex(dev);
struct {
struct nlmsghdr hdr;
struct ndmsg ndm;
int ret;
uint32_t sn = priv->nl_sn++;
- if (priv->nl_socket == -1)
+ if (priv->nl_socket_route == -1)
return 0;
- fd = priv->nl_socket;
+ fd = priv->nl_socket_route;
memcpy(RTA_DATA(&req.rta), mac, ETHER_ADDR_LEN);
req.hdr.nlmsg_len = NLMSG_ALIGN(req.hdr.nlmsg_len) +
RTA_ALIGN(req.rta.rta_len);
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_nl_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac,
+mlx5_nl_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
uint32_t index)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
int ret;
ret = mlx5_nl_mac_addr_modify(dev, mac, 1);
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_nl_mac_addr_remove(struct rte_eth_dev *dev, struct ether_addr *mac,
+mlx5_nl_mac_addr_remove(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
uint32_t index)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
BITFIELD_RESET(priv->mac_own, index);
return mlx5_nl_mac_addr_modify(dev, mac, 0);
void
mlx5_nl_mac_addr_sync(struct rte_eth_dev *dev)
{
- struct ether_addr macs[MLX5_MAX_MAC_ADDRESSES];
+ struct rte_ether_addr macs[MLX5_MAX_MAC_ADDRESSES];
int macs_n = 0;
int i;
int ret;
void
mlx5_nl_mac_addr_flush(struct rte_eth_dev *dev)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
int i;
for (i = MLX5_MAX_MAC_ADDRESSES - 1; i >= 0; --i) {
- struct ether_addr *m = &dev->data->mac_addrs[i];
+ struct rte_ether_addr *m = &dev->data->mac_addrs[i];
if (BITFIELD_ISSET(priv->mac_own, i))
mlx5_nl_mac_addr_remove(dev, m, i);
}
}
+
+/**
+ * Enable promiscuous / all multicast mode through Netlink.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param flags
+ * IFF_PROMISC for promiscuous, IFF_ALLMULTI for allmulti.
+ * @param enable
+ * Nonzero to enable, disable otherwise.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_device_flags(struct rte_eth_dev *dev, uint32_t flags, int enable)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ unsigned int iface_idx = mlx5_ifindex(dev);
+ struct {
+ struct nlmsghdr hdr;
+ struct ifinfomsg ifi;
+ } req = {
+ .hdr = {
+ .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
+ .nlmsg_type = RTM_NEWLINK,
+ .nlmsg_flags = NLM_F_REQUEST,
+ },
+ .ifi = {
+ .ifi_flags = enable ? flags : 0,
+ .ifi_change = flags,
+ .ifi_index = iface_idx,
+ },
+ };
+ int fd;
+ int ret;
+
+ assert(!(flags & ~(IFF_PROMISC | IFF_ALLMULTI)));
+ if (priv->nl_socket_route < 0)
+ return 0;
+ fd = priv->nl_socket_route;
+ ret = mlx5_nl_send(fd, &req.hdr, priv->nl_sn++);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Enable promiscuous mode through Netlink.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param enable
+ * Nonzero to enable, disable otherwise.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_promisc(struct rte_eth_dev *dev, int enable)
+{
+ int ret = mlx5_nl_device_flags(dev, IFF_PROMISC, enable);
+
+ if (ret)
+ DRV_LOG(DEBUG,
+ "port %u cannot %s promisc mode: Netlink error %s",
+ dev->data->port_id, enable ? "enable" : "disable",
+ strerror(rte_errno));
+ return ret;
+}
+
+/**
+ * Enable all multicast mode through Netlink.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param enable
+ * Nonzero to enable, disable otherwise.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_allmulti(struct rte_eth_dev *dev, int enable)
+{
+ int ret = mlx5_nl_device_flags(dev, IFF_ALLMULTI, enable);
+
+ if (ret)
+ DRV_LOG(DEBUG,
+ "port %u cannot %s allmulti mode: Netlink error %s",
+ dev->data->port_id, enable ? "enable" : "disable",
+ strerror(rte_errno));
+ return ret;
+}
+
+/**
+ * Process network interface information from Netlink message.
+ *
+ * @param nh
+ * Pointer to Netlink message header.
+ * @param arg
+ * Opaque data pointer for this callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_cmdget_cb(struct nlmsghdr *nh, void *arg)
+{
+ struct mlx5_nl_ifindex_data *data = arg;
+ size_t off = NLMSG_HDRLEN;
+ uint32_t ibindex = 0;
+ uint32_t ifindex = 0;
+ uint32_t portnum = 0;
+ int found = 0;
+
+ if (nh->nlmsg_type !=
+ RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_GET) &&
+ nh->nlmsg_type !=
+ RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_PORT_GET))
+ goto error;
+ while (off < nh->nlmsg_len) {
+ struct nlattr *na = (void *)((uintptr_t)nh + off);
+ void *payload = (void *)((uintptr_t)na + NLA_HDRLEN);
+
+ if (na->nla_len > nh->nlmsg_len - off)
+ goto error;
+ switch (na->nla_type) {
+ case RDMA_NLDEV_ATTR_DEV_INDEX:
+ ibindex = *(uint32_t *)payload;
+ break;
+ case RDMA_NLDEV_ATTR_DEV_NAME:
+ if (!strcmp(payload, data->name))
+ found = 1;
+ break;
+ case RDMA_NLDEV_ATTR_NDEV_INDEX:
+ ifindex = *(uint32_t *)payload;
+ break;
+ case RDMA_NLDEV_ATTR_PORT_INDEX:
+ portnum = *(uint32_t *)payload;
+ break;
+ default:
+ break;
+ }
+ off += NLA_ALIGN(na->nla_len);
+ }
+ if (found) {
+ data->ibindex = ibindex;
+ data->ifindex = ifindex;
+ data->portnum = portnum;
+ }
+ return 0;
+error:
+ rte_errno = EINVAL;
+ return -rte_errno;
+}
+
+/**
+ * Get index of network interface associated with some IB device.
+ *
+ * This is the only somewhat safe method to avoid resorting to heuristics
+ * when faced with port representors. Unfortunately it requires at least
+ * Linux 4.17.
+ *
+ * @param nl
+ * Netlink socket of the RDMA kind (NETLINK_RDMA).
+ * @param[in] name
+ * IB device name.
+ * @param[in] pindex
+ * IB device port index, starting from 1
+ * @return
+ * A valid (nonzero) interface index on success, 0 otherwise and rte_errno
+ * is set.
+ */
+unsigned int
+mlx5_nl_ifindex(int nl, const char *name, uint32_t pindex)
+{
+ uint32_t seq = random();
+ struct mlx5_nl_ifindex_data data = {
+ .name = name,
+ .ibindex = 0, /* Determined during first pass. */
+ .ifindex = 0, /* Determined during second pass. */
+ };
+ union {
+ struct nlmsghdr nh;
+ uint8_t buf[NLMSG_HDRLEN +
+ NLA_HDRLEN + NLA_ALIGN(sizeof(data.ibindex)) +
+ NLA_HDRLEN + NLA_ALIGN(sizeof(pindex))];
+ } req = {
+ .nh = {
+ .nlmsg_len = NLMSG_LENGTH(0),
+ .nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+ RDMA_NLDEV_CMD_GET),
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP,
+ },
+ };
+ struct nlattr *na;
+ int ret;
+
+ ret = mlx5_nl_send(nl, &req.nh, seq);
+ if (ret < 0)
+ return 0;
+ ret = mlx5_nl_recv(nl, seq, mlx5_nl_cmdget_cb, &data);
+ if (ret < 0)
+ return 0;
+ if (!data.ibindex)
+ goto error;
+ ++seq;
+ req.nh.nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+ RDMA_NLDEV_CMD_PORT_GET);
+ req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+ req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.buf) - NLMSG_HDRLEN);
+ na = (void *)((uintptr_t)req.buf + NLMSG_HDRLEN);
+ na->nla_len = NLA_HDRLEN + sizeof(data.ibindex);
+ na->nla_type = RDMA_NLDEV_ATTR_DEV_INDEX;
+ memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
+ &data.ibindex, sizeof(data.ibindex));
+ na = (void *)((uintptr_t)na + NLA_ALIGN(na->nla_len));
+ na->nla_len = NLA_HDRLEN + sizeof(pindex);
+ na->nla_type = RDMA_NLDEV_ATTR_PORT_INDEX;
+ memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
+ &pindex, sizeof(pindex));
+ ret = mlx5_nl_send(nl, &req.nh, seq);
+ if (ret < 0)
+ return 0;
+ ret = mlx5_nl_recv(nl, seq, mlx5_nl_cmdget_cb, &data);
+ if (ret < 0)
+ return 0;
+ if (!data.ifindex)
+ goto error;
+ return data.ifindex;
+error:
+ rte_errno = ENODEV;
+ return 0;
+}
+
+/**
+ * Get the number of physical ports of given IB device.
+ *
+ * @param nl
+ * Netlink socket of the RDMA kind (NETLINK_RDMA).
+ * @param[in] name
+ * IB device name.
+ *
+ * @return
+ * A valid (nonzero) number of ports on success, 0 otherwise
+ * and rte_errno is set.
+ */
+unsigned int
+mlx5_nl_portnum(int nl, const char *name)
+{
+ uint32_t seq = random();
+ struct mlx5_nl_ifindex_data data = {
+ .name = name,
+ .ibindex = 0,
+ .ifindex = 0,
+ .portnum = 0,
+ };
+ struct nlmsghdr req = {
+ .nlmsg_len = NLMSG_LENGTH(0),
+ .nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+ RDMA_NLDEV_CMD_GET),
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP,
+ };
+ int ret;
+
+ ret = mlx5_nl_send(nl, &req, seq);
+ if (ret < 0)
+ return 0;
+ ret = mlx5_nl_recv(nl, seq, mlx5_nl_cmdget_cb, &data);
+ if (ret < 0)
+ return 0;
+ if (!data.ibindex) {
+ rte_errno = ENODEV;
+ return 0;
+ }
+ if (!data.portnum)
+ rte_errno = EINVAL;
+ return data.portnum;
+}
+
+/**
+ * Process switch information from Netlink message.
+ *
+ * @param nh
+ * Pointer to Netlink message header.
+ * @param arg
+ * Opaque data pointer for this callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_switch_info_cb(struct nlmsghdr *nh, void *arg)
+{
+ struct mlx5_switch_info info = {
+ .master = 0,
+ .representor = 0,
+ .name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET,
+ .port_name = 0,
+ .switch_id = 0,
+ };
+ size_t off = NLMSG_LENGTH(sizeof(struct ifinfomsg));
+ bool switch_id_set = false;
+ bool num_vf_set = false;
+
+ if (nh->nlmsg_type != RTM_NEWLINK)
+ goto error;
+ while (off < nh->nlmsg_len) {
+ struct rtattr *ra = (void *)((uintptr_t)nh + off);
+ void *payload = RTA_DATA(ra);
+ unsigned int i;
+
+ if (ra->rta_len > nh->nlmsg_len - off)
+ goto error;
+ switch (ra->rta_type) {
+ case IFLA_NUM_VF:
+ num_vf_set = true;
+ break;
+ case IFLA_PHYS_PORT_NAME:
+ mlx5_translate_port_name((char *)payload, &info);
+ break;
+ case IFLA_PHYS_SWITCH_ID:
+ info.switch_id = 0;
+ for (i = 0; i < RTA_PAYLOAD(ra); ++i) {
+ info.switch_id <<= 8;
+ info.switch_id |= ((uint8_t *)payload)[i];
+ }
+ switch_id_set = true;
+ break;
+ }
+ off += RTA_ALIGN(ra->rta_len);
+ }
+ if (switch_id_set) {
+ /* We have some E-Switch configuration. */
+ mlx5_nl_check_switch_info(num_vf_set, &info);
+ }
+ assert(!(info.master && info.representor));
+ memcpy(arg, &info, sizeof(info));
+ return 0;
+error:
+ rte_errno = EINVAL;
+ return -rte_errno;
+}
+
+/**
+ * Get switch information associated with network interface.
+ *
+ * @param nl
+ * Netlink socket of the ROUTE kind (NETLINK_ROUTE).
+ * @param ifindex
+ * Network interface index.
+ * @param[out] info
+ * Switch information object, populated in case of success.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_switch_info(int nl, unsigned int ifindex, struct mlx5_switch_info *info)
+{
+ uint32_t seq = random();
+ struct {
+ struct nlmsghdr nh;
+ struct ifinfomsg info;
+ struct rtattr rta;
+ uint32_t extmask;
+ } req = {
+ .nh = {
+ .nlmsg_len = NLMSG_LENGTH
+ (sizeof(req.info) +
+ RTA_LENGTH(sizeof(uint32_t))),
+ .nlmsg_type = RTM_GETLINK,
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
+ },
+ .info = {
+ .ifi_family = AF_UNSPEC,
+ .ifi_index = ifindex,
+ },
+ .rta = {
+ .rta_type = IFLA_EXT_MASK,
+ .rta_len = RTA_LENGTH(sizeof(int32_t)),
+ },
+ .extmask = RTE_LE32(1),
+ };
+ int ret;
+
+ ret = mlx5_nl_send(nl, &req.nh, seq);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(nl, seq, mlx5_nl_switch_info_cb, info);
+ if (info->master && info->representor) {
+ DRV_LOG(ERR, "ifindex %u device is recognized as master"
+ " and as representor", ifindex);
+ rte_errno = ENODEV;
+ ret = -rte_errno;
+ }
+ return ret;
+}
git.droids-corp.org / dpdk.git / blobdiff