net/mlx5: use SPDX tags in 6WIND copyrighted files
[dpdk.git] / drivers / net / mlx5 / mlx5_prm.h
index 3cc5af9..9eb9c15 100644 (file)
@@ -1,34 +1,6 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright 2016 6WIND S.A.
- *   Copyright 2016 Mellanox.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of 6WIND S.A. nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2016 6WIND S.A.
+ * Copyright 2016 Mellanox.
  */
 
 #ifndef RTE_PMD_MLX5_PRM_H_
 #ifdef PEDANTIC
 #pragma GCC diagnostic ignored "-Wpedantic"
 #endif
-#include <infiniband/mlx5_hw.h>
+#include <infiniband/mlx5dv.h>
 #ifdef PEDANTIC
 #pragma GCC diagnostic error "-Wpedantic"
 #endif
 
+#include <rte_vect.h>
 #include "mlx5_autoconf.h"
 
 /* Get CQE owner bit. */
@@ -63,9 +36,6 @@
 /* Invalidate a CQE. */
 #define MLX5_CQE_INVALIDATE (MLX5_CQE_INVALID << 4)
 
-/* CQE value to inform that VLAN is stripped. */
-#define MLX5_CQE_VLAN_STRIPPED 0x1
-
 /* Maximum number of packets a multi-packet WQE can handle. */
 #define MLX5_MPW_DSEG_MAX 5
 
@@ -75,6 +45,9 @@
 /* WQE size */
 #define MLX5_WQE_SIZE (4 * MLX5_WQE_DWORD_SIZE)
 
+/* Max size of a WQE session. */
+#define MLX5_WQE_SIZE_MAX 960U
+
 /* Compute the number of DS. */
 #define MLX5_WQE_DS(n) \
        (((n) + MLX5_WQE_DWORD_SIZE - 1) / MLX5_WQE_DWORD_SIZE)
 /* Room for inline data in multi-packet WQE. */
 #define MLX5_MWQE64_INL_DATA 28
 
-#ifndef HAVE_VERBS_MLX5_OPCODE_TSO
-#define MLX5_OPCODE_TSO MLX5_OPCODE_LSO_MPW /* Compat with OFED 3.3. */
-#endif
+/* Default minimum number of Tx queues for inlining packets. */
+#define MLX5_EMPW_MIN_TXQS 8
 
-/* IPv4 packet. */
-#define MLX5_CQE_RX_IPV4_PACKET (1u << 2)
+/* Default max packet length to be inlined. */
+#define MLX5_EMPW_MAX_INLINE_LEN (4U * MLX5_WQE_SIZE)
+
+
+#define MLX5_OPC_MOD_ENHANCED_MPSW 0
+#define MLX5_OPCODE_ENHANCED_MPSW 0x29
+
+/* CQE value to inform that VLAN is stripped. */
+#define MLX5_CQE_VLAN_STRIPPED (1u << 0)
+
+/* IPv4 options. */
+#define MLX5_CQE_RX_IP_EXT_OPTS_PACKET (1u << 1)
 
 /* IPv6 packet. */
-#define MLX5_CQE_RX_IPV6_PACKET (1u << 3)
+#define MLX5_CQE_RX_IPV6_PACKET (1u << 2)
+
+/* IPv4 packet. */
+#define MLX5_CQE_RX_IPV4_PACKET (1u << 3)
+
+/* TCP packet. */
+#define MLX5_CQE_RX_TCP_PACKET (1u << 4)
 
-/* Outer IPv4 packet. */
-#define MLX5_CQE_RX_OUTER_IPV4_PACKET (1u << 7)
+/* UDP packet. */
+#define MLX5_CQE_RX_UDP_PACKET (1u << 5)
 
-/* Outer IPv6 packet. */
-#define MLX5_CQE_RX_OUTER_IPV6_PACKET (1u << 8)
+/* IP is fragmented. */
+#define MLX5_CQE_RX_IP_FRAG_PACKET (1u << 7)
+
+/* L2 header is valid. */
+#define MLX5_CQE_RX_L2_HDR_VALID (1u << 8)
+
+/* L3 header is valid. */
+#define MLX5_CQE_RX_L3_HDR_VALID (1u << 9)
+
+/* L4 header is valid. */
+#define MLX5_CQE_RX_L4_HDR_VALID (1u << 10)
+
+/* Outer packet, 0 IPv4, 1 IPv6. */
+#define MLX5_CQE_RX_OUTER_PACKET (1u << 1)
 
 /* Tunnel packet bit in the CQE. */
-#define MLX5_CQE_RX_TUNNEL_PACKET (1u << 4)
+#define MLX5_CQE_RX_TUNNEL_PACKET (1u << 0)
 
-/* Outer IP checksum OK. */
-#define MLX5_CQE_RX_OUTER_IP_CSUM_OK (1u << 5)
+/* Inner L3 checksum offload (Tunneled packets only). */
+#define MLX5_ETH_WQE_L3_INNER_CSUM (1u << 4)
 
-/* Outer UDP header and checksum OK. */
-#define MLX5_CQE_RX_OUTER_TCP_UDP_CSUM_OK (1u << 6)
+/* Inner L4 checksum offload (Tunneled packets only). */
+#define MLX5_ETH_WQE_L4_INNER_CSUM (1u << 5)
+
+/* Is flow mark valid. */
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+#define MLX5_FLOW_MARK_IS_VALID(val) ((val) & 0xffffff00)
+#else
+#define MLX5_FLOW_MARK_IS_VALID(val) ((val) & 0xffffff)
+#endif
 
 /* INVALID is used by packets matching no flow rules. */
 #define MLX5_FLOW_MARK_INVALID 0
 /* Default mark value used when none is provided. */
 #define MLX5_FLOW_MARK_DEFAULT 0xffffff
 
+/* Maximum number of DS in WQE. */
+#define MLX5_DSEG_MAX 63
+
 /* Subset of struct mlx5_wqe_eth_seg. */
 struct mlx5_wqe_eth_seg_small {
        uint32_t rsvd0;
@@ -145,16 +155,30 @@ struct mlx5_wqe {
        struct mlx5_wqe_eth_seg_small eseg;
 };
 
+/* Vectorize WQE header. */
+struct mlx5_wqe_v {
+       rte_v128u32_t ctrl;
+       rte_v128u32_t eseg;
+};
+
 /* WQE. */
 struct mlx5_wqe64 {
        struct mlx5_wqe hdr;
        uint8_t raw[32];
 } __rte_aligned(MLX5_WQE_SIZE);
 
+/* MPW mode. */
+enum mlx5_mpw_mode {
+       MLX5_MPW_DISABLED,
+       MLX5_MPW,
+       MLX5_MPW_ENHANCED, /* Enhanced Multi-Packet Send WQE, a.k.a MPWv2. */
+};
+
 /* MPW session status. */
 enum mlx5_mpw_state {
        MLX5_MPW_STATE_OPENED,
        MLX5_MPW_INL_STATE_OPENED,
+       MLX5_MPW_ENHANCED_STATE_OPENED,
        MLX5_MPW_STATE_CLOSED,
 };
 
@@ -181,8 +205,7 @@ struct mlx5_cqe {
        uint32_t rx_hash_res;
        uint8_t rx_hash_type;
        uint8_t rsvd1[11];
-       uint8_t hds_ip_ext;
-       uint8_t l4_hdr_type_etc;
+       uint16_t hdr_type_etc;
        uint16_t vlan_info;
        uint8_t rsvd2[12];
        uint32_t byte_cnt;
@@ -193,6 +216,46 @@ struct mlx5_cqe {
        uint8_t op_own;
 };
 
+/* Adding direct verbs to data-path. */
+
+/* CQ sequence number mask. */
+#define MLX5_CQ_SQN_MASK 0x3
+
+/* CQ sequence number index. */
+#define MLX5_CQ_SQN_OFFSET 28
+
+/* CQ doorbell index mask. */
+#define MLX5_CI_MASK 0xffffff
+
+/* CQ doorbell offset. */
+#define MLX5_CQ_ARM_DB 1
+
+/* CQ doorbell offset*/
+#define MLX5_CQ_DOORBELL 0x20
+
+/* CQE format value. */
+#define MLX5_COMPRESSED 0x3
+
+/* CQE format mask. */
+#define MLX5E_CQE_FORMAT_MASK 0xc
+
+/* MPW opcode. */
+#define MLX5_OPC_MOD_MPW 0x01
+
+/* Compressed Rx CQE structure. */
+struct mlx5_mini_cqe8 {
+       union {
+               uint32_t rx_hash_result;
+               uint32_t checksum;
+               struct {
+                       uint16_t wqe_counter;
+                       uint8_t  s_wqe_opcode;
+                       uint8_t  reserved;
+               } s_wqe_info;
+       };
+       uint32_t byte_cnt;
+};
+
 /**
  * Convert a user mark to flow mark.
  *
@@ -209,9 +272,11 @@ mlx5_flow_mark_set(uint32_t val)
 
        /*
         * Add one to the user value to differentiate un-marked flows from
-        * marked flows.
+        * marked flows, if the ID is equal to MLX5_FLOW_MARK_DEFAULT it
+        * remains untouched.
         */
-       ++val;
+       if (val != MLX5_FLOW_MARK_DEFAULT)
+               ++val;
 #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
        /*
         * Mark is 24 bits (minus reserved values) but is stored on a 32 bit
@@ -223,7 +288,6 @@ mlx5_flow_mark_set(uint32_t val)
 #else
        ret = val;
 #endif
-       assert(ret <= MLX5_FLOW_MARK_MAX);
        return ret;
 }