#include "mlx5_defs.h"
#include "mlx5.h"
+#include "mlx5_mr.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
mlx5_queue_state_modify(struct rte_eth_dev *dev,
struct mlx5_mp_arg_queue_state_modify *sm)
{
+ struct mlx5_priv *priv = dev->data->dev_private;
int ret = 0;
switch (rte_eal_process_type()) {
ret = mlx5_queue_state_modify_primary(dev, sm);
break;
case RTE_PROC_SECONDARY:
- ret = mlx5_mp_req_queue_state_modify(dev, sm);
+ ret = mlx5_mp_req_queue_state_modify(&priv->mp_id, sm);
break;
default:
break;
pkt->hash.fdir.hi = mlx5_flow_mark_get(mark);
}
}
- if (rte_flow_dynf_metadata_avail() && cqe->flow_table_metadata) {
- pkt->ol_flags |= PKT_RX_DYNF_METADATA;
- *RTE_FLOW_DYNF_METADATA(pkt) = cqe->flow_table_metadata;
+ if (rxq->dynf_meta && cqe->flow_table_metadata) {
+ pkt->ol_flags |= rxq->flow_meta_mask;
+ *RTE_MBUF_DYNFIELD(pkt, rxq->flow_meta_offset, uint32_t *) =
+ cqe->flow_table_metadata;
}
if (rxq->csum)
pkt->ol_flags |= rxq_cq_to_ol_flags(cqe);
unsigned int i = 0;
uint32_t rq_ci = rxq->rq_ci;
uint16_t consumed_strd = rxq->consumed_strd;
- uint16_t headroom_sz = rxq->strd_headroom_en * RTE_PKTMBUF_HEADROOM;
struct mlx5_mprq_buf *buf = (*rxq->mprq_bufs)[rq_ci & wq_mask];
while (i < pkts_n) {
struct rte_mbuf *pkt;
void *addr;
int ret;
- unsigned int len;
+ uint32_t len;
uint16_t strd_cnt;
uint16_t strd_idx;
uint32_t offset;
uint32_t byte_cnt;
+ int32_t hdrm_overlap;
volatile struct mlx5_mini_cqe8 *mcqe = NULL;
uint32_t rss_hash_res = 0;
- uint8_t lro_num_seg;
if (consumed_strd == strd_n) {
/* Replace WQE only if the buffer is still in use. */
MLX5_ASSERT(strd_idx < strd_n);
MLX5_ASSERT(!((rte_be_to_cpu_16(cqe->wqe_id) ^ rq_ci) &
wq_mask));
- lro_num_seg = cqe->lro_num_seg;
- /*
- * Currently configured to receive a packet per a stride. But if
- * MTU is adjusted through kernel interface, device could
- * consume multiple strides without raising an error. In this
- * case, the packet should be dropped because it is bigger than
- * the max_rx_pkt_len.
- */
- if (unlikely(!lro_num_seg && strd_cnt > 1)) {
- ++rxq->stats.idropped;
- continue;
- }
pkt = rte_pktmbuf_alloc(rxq->mp);
if (unlikely(pkt == NULL)) {
++rxq->stats.rx_nombuf;
len -= RTE_ETHER_CRC_LEN;
offset = strd_idx * strd_sz + strd_shift;
addr = RTE_PTR_ADD(mlx5_mprq_buf_addr(buf, strd_n), offset);
+ hdrm_overlap = len + RTE_PKTMBUF_HEADROOM - strd_cnt * strd_sz;
/*
* Memcpy packets to the target mbuf if:
* - The size of packet is smaller than mprq_max_memcpy_len.
* - Out of buffer in the Mempool for Multi-Packet RQ.
+ * - The packet's stride overlaps a headroom and scatter is off.
*/
- if (len <= rxq->mprq_max_memcpy_len || rxq->mprq_repl == NULL) {
- /*
- * When memcpy'ing packet due to out-of-buffer, the
- * packet must be smaller than the target mbuf.
- */
- if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
+ if (len <= rxq->mprq_max_memcpy_len ||
+ rxq->mprq_repl == NULL ||
+ (hdrm_overlap > 0 && !rxq->strd_scatter_en)) {
+ if (likely(rte_pktmbuf_tailroom(pkt) >= len)) {
+ rte_memcpy(rte_pktmbuf_mtod(pkt, void *),
+ addr, len);
+ DATA_LEN(pkt) = len;
+ } else if (rxq->strd_scatter_en) {
+ struct rte_mbuf *prev = pkt;
+ uint32_t seg_len =
+ RTE_MIN(rte_pktmbuf_tailroom(pkt), len);
+ uint32_t rem_len = len - seg_len;
+
+ rte_memcpy(rte_pktmbuf_mtod(pkt, void *),
+ addr, seg_len);
+ DATA_LEN(pkt) = seg_len;
+ while (rem_len) {
+ struct rte_mbuf *next =
+ rte_pktmbuf_alloc(rxq->mp);
+
+ if (unlikely(next == NULL)) {
+ rte_pktmbuf_free(pkt);
+ ++rxq->stats.rx_nombuf;
+ goto out;
+ }
+ NEXT(prev) = next;
+ SET_DATA_OFF(next, 0);
+ addr = RTE_PTR_ADD(addr, seg_len);
+ seg_len = RTE_MIN
+ (rte_pktmbuf_tailroom(next),
+ rem_len);
+ rte_memcpy
+ (rte_pktmbuf_mtod(next, void *),
+ addr, seg_len);
+ DATA_LEN(next) = seg_len;
+ rem_len -= seg_len;
+ prev = next;
+ ++NB_SEGS(pkt);
+ }
+ } else {
rte_pktmbuf_free_seg(pkt);
++rxq->stats.idropped;
continue;
}
- rte_memcpy(rte_pktmbuf_mtod(pkt, void *), addr, len);
- DATA_LEN(pkt) = len;
} else {
rte_iova_t buf_iova;
struct rte_mbuf_ext_shared_info *shinfo;
rte_atomic16_add_return(&buf->refcnt, 1);
MLX5_ASSERT((uint16_t)rte_atomic16_read(&buf->refcnt) <=
strd_n + 1);
- buf_addr = RTE_PTR_SUB(addr, headroom_sz);
+ buf_addr = RTE_PTR_SUB(addr, RTE_PKTMBUF_HEADROOM);
/*
* MLX5 device doesn't use iova but it is necessary in a
* case where the Rx packet is transmitted via a
rte_pktmbuf_attach_extbuf(pkt, buf_addr, buf_iova,
buf_len, shinfo);
/* Set mbuf head-room. */
- pkt->data_off = headroom_sz;
+ SET_DATA_OFF(pkt, RTE_PKTMBUF_HEADROOM);
MLX5_ASSERT(pkt->ol_flags == EXT_ATTACHED_MBUF);
- /*
- * Prevent potential overflow due to MTU change through
- * kernel interface.
- */
- if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
- rte_pktmbuf_free_seg(pkt);
- ++rxq->stats.idropped;
- continue;
- }
+ MLX5_ASSERT(rte_pktmbuf_tailroom(pkt) <
+ len - (hdrm_overlap > 0 ? hdrm_overlap : 0));
DATA_LEN(pkt) = len;
/*
- * LRO packet may consume all the stride memory, in this
- * case packet head-room space is not guaranteed so must
- * to add an empty mbuf for the head-room.
+ * Copy the last fragment of a packet (up to headroom
+ * size bytes) in case there is a stride overlap with
+ * a next packet's headroom. Allocate a separate mbuf
+ * to store this fragment and link it. Scatter is on.
*/
- if (!rxq->strd_headroom_en) {
- struct rte_mbuf *headroom_mbuf =
- rte_pktmbuf_alloc(rxq->mp);
+ if (hdrm_overlap > 0) {
+ MLX5_ASSERT(rxq->strd_scatter_en);
+ struct rte_mbuf *seg =
+ rte_pktmbuf_alloc(rxq->mp);
- if (unlikely(headroom_mbuf == NULL)) {
+ if (unlikely(seg == NULL)) {
rte_pktmbuf_free_seg(pkt);
++rxq->stats.rx_nombuf;
break;
}
- PORT(pkt) = rxq->port_id;
- NEXT(headroom_mbuf) = pkt;
- pkt = headroom_mbuf;
+ SET_DATA_OFF(seg, 0);
+ rte_memcpy(rte_pktmbuf_mtod(seg, void *),
+ RTE_PTR_ADD(addr, len - hdrm_overlap),
+ hdrm_overlap);
+ DATA_LEN(seg) = hdrm_overlap;
+ DATA_LEN(pkt) = len - hdrm_overlap;
+ NEXT(pkt) = seg;
NB_SEGS(pkt) = 2;
}
}
rxq_cq_to_mbuf(rxq, pkt, cqe, rss_hash_res);
- if (lro_num_seg > 1) {
+ if (cqe->lro_num_seg > 1) {
mlx5_lro_update_hdr(addr, cqe, len);
pkt->ol_flags |= PKT_RX_LRO;
- pkt->tso_segsz = strd_sz;
+ pkt->tso_segsz = len / cqe->lro_num_seg;
}
PKT_LEN(pkt) = len;
PORT(pkt) = rxq->port_id;
*(pkts++) = pkt;
++i;
}
+out:
/* Update the consumer indexes. */
rxq->consumed_strd = consumed_strd;
rte_cio_wmb();
{
unsigned int count = MLX5_TX_COMP_MAX_CQE;
volatile struct mlx5_cqe *last_cqe = NULL;
- uint16_t ci = txq->cq_ci;
+ bool ring_doorbell = false;
int ret;
static_assert(MLX5_CQE_STATUS_HW_OWN < 0, "Must be negative value");
do {
volatile struct mlx5_cqe *cqe;
- cqe = &txq->cqes[ci & txq->cqe_m];
- ret = check_cqe(cqe, txq->cqe_s, ci);
+ cqe = &txq->cqes[txq->cq_ci & txq->cqe_m];
+ ret = check_cqe(cqe, txq->cqe_s, txq->cq_ci);
if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
if (likely(ret != MLX5_CQE_STATUS_ERR)) {
/* No new CQEs in completion queue. */
* here, before we might perform SQ reset.
*/
rte_wmb();
- txq->cq_ci = ci;
ret = mlx5_tx_error_cqe_handle
(txq, (volatile struct mlx5_err_cqe *)cqe);
if (unlikely(ret < 0)) {
* MLX5_CQE_SYNDROME_WR_FLUSH_ERR status.
* The send queue is supposed to be empty.
*/
- ++ci;
- txq->cq_pi = ci;
+ ring_doorbell = true;
+ ++txq->cq_ci;
+ txq->cq_pi = txq->cq_ci;
last_cqe = NULL;
continue;
}
/* Normal transmit completion. */
- MLX5_ASSERT(ci != txq->cq_pi);
- MLX5_ASSERT((txq->fcqs[ci & txq->cqe_m] >> 16) ==
+ MLX5_ASSERT(txq->cq_ci != txq->cq_pi);
+ MLX5_ASSERT((txq->fcqs[txq->cq_ci & txq->cqe_m] >> 16) ==
cqe->wqe_counter);
- ++ci;
+ ring_doorbell = true;
+ ++txq->cq_ci;
last_cqe = cqe;
/*
* We have to restrict the amount of processed CQEs
if (likely(--count == 0))
break;
} while (true);
- if (likely(ci != txq->cq_ci)) {
- /*
- * Update completion queue consuming index
- * and ring doorbell to notify hardware.
- */
+ if (likely(ring_doorbell)) {
+ /* Ring doorbell to notify hardware. */
rte_compiler_barrier();
- txq->cq_ci = ci;
- *txq->cq_db = rte_cpu_to_be_32(ci);
+ *txq->cq_db = rte_cpu_to_be_32(txq->cq_ci);
mlx5_tx_comp_flush(txq, last_cqe, olx);
}
}
/*
* Calculate the number of available resources - elts and WQEs.
* There are two possible different scenarios:
- * - no data inlining into WQEs, one WQEBB may contains upto
+ * - no data inlining into WQEs, one WQEBB may contains up to
* four packets, in this case elts become scarce resource
* - data inlining into WQEs, one packet may require multiple
* WQEBBs, the WQEs become the limiting factor.
/*
* Generate routines with Legacy Multi-Packet Write support.
- * This mode is supported by ConnectX-4LX only and imposes
+ * This mode is supported by ConnectX-4 Lx only and imposes
* offload limitations, not supported:
* - ACL/Flows (metadata are becoming meaningless)
* - WQE Inline headers
git.droids-corp.org / dpdk.git / blobdiff