-/*-
- * BSD LICENSE
- *
- * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
#include <errno.h>
#include <string.h>
#include <stdint.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <inttypes.h>
/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
#pragma GCC diagnostic error "-Wpedantic"
#endif
-/* DPDK headers don't like -pedantic. */
-#ifdef PEDANTIC
-#pragma GCC diagnostic ignored "-Wpedantic"
-#endif
#include <rte_mbuf.h>
#include <rte_malloc.h>
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
#include <rte_common.h>
-#ifdef PEDANTIC
-#pragma GCC diagnostic error "-Wpedantic"
-#endif
#include "mlx5_utils.h"
#include "mlx5_defs.h"
#include "mlx5.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
-#include "mlx5_defs.h"
+#include "mlx5_glue.h"
/**
* Allocate TX queue elements.
*
* @param txq_ctrl
* Pointer to TX queue structure.
- * @param elts_n
- * Number of elements to allocate.
*/
-static void
-txq_alloc_elts(struct txq_ctrl *txq_ctrl, unsigned int elts_n)
+void
+txq_alloc_elts(struct mlx5_txq_ctrl *txq_ctrl)
{
+ const unsigned int elts_n = 1 << txq_ctrl->txq.elts_n;
unsigned int i;
for (i = 0; (i != elts_n); ++i)
- (*txq_ctrl->txq.elts)[i] = NULL;
- for (i = 0; (i != txq_ctrl->txq.wqe_n); ++i) {
- volatile struct mlx5_wqe64 *wqe = &(*txq_ctrl->txq.wqes)[i];
-
- memset((void *)(uintptr_t)wqe, 0x0, sizeof(*wqe));
- }
- DEBUG("%p: allocated and configured %u WRs", (void *)txq_ctrl, elts_n);
+ txq_ctrl->txq.elts[i] = NULL;
+ DRV_LOG(DEBUG, "port %u Tx queue %u allocated and configured %u WRs",
+ PORT_ID(txq_ctrl->priv), txq_ctrl->txq.idx, elts_n);
txq_ctrl->txq.elts_head = 0;
txq_ctrl->txq.elts_tail = 0;
txq_ctrl->txq.elts_comp = 0;
* Pointer to TX queue structure.
*/
static void
-txq_free_elts(struct txq_ctrl *txq_ctrl)
+txq_free_elts(struct mlx5_txq_ctrl *txq_ctrl)
{
- unsigned int elts_n = 1 << txq_ctrl->txq.elts_n;
- unsigned int elts_head = txq_ctrl->txq.elts_head;
- unsigned int elts_tail = txq_ctrl->txq.elts_tail;
- struct rte_mbuf *(*elts)[elts_n] = txq_ctrl->txq.elts;
+ const uint16_t elts_n = 1 << txq_ctrl->txq.elts_n;
+ const uint16_t elts_m = elts_n - 1;
+ uint16_t elts_head = txq_ctrl->txq.elts_head;
+ uint16_t elts_tail = txq_ctrl->txq.elts_tail;
+ struct rte_mbuf *(*elts)[elts_n] = &txq_ctrl->txq.elts;
- DEBUG("%p: freeing WRs", (void *)txq_ctrl);
+ DRV_LOG(DEBUG, "port %u Tx queue %u freeing WRs",
+ PORT_ID(txq_ctrl->priv), txq_ctrl->txq.idx);
txq_ctrl->txq.elts_head = 0;
txq_ctrl->txq.elts_tail = 0;
txq_ctrl->txq.elts_comp = 0;
while (elts_tail != elts_head) {
- struct rte_mbuf *elt = (*elts)[elts_tail];
+ struct rte_mbuf *elt = (*elts)[elts_tail & elts_m];
assert(elt != NULL);
- rte_pktmbuf_free(elt);
+ rte_pktmbuf_free_seg(elt);
#ifndef NDEBUG
/* Poisoning. */
- memset(&(*elts)[elts_tail],
+ memset(&(*elts)[elts_tail & elts_m],
0x77,
- sizeof((*elts)[elts_tail]));
+ sizeof((*elts)[elts_tail & elts_m]));
#endif
- if (++elts_tail == elts_n)
- elts_tail = 0;
+ ++elts_tail;
}
}
/**
- * Clean up a TX queue.
+ * Returns the per-port supported offloads.
*
- * Destroy objects, free allocated memory and reset the structure for reuse.
+ * @param dev
+ * Pointer to Ethernet device.
*
- * @param txq_ctrl
- * Pointer to TX queue structure.
+ * @return
+ * Supported Tx offloads.
*/
-void
-txq_cleanup(struct txq_ctrl *txq_ctrl)
+uint64_t
+mlx5_get_tx_port_offloads(struct rte_eth_dev *dev)
{
- struct ibv_exp_release_intf_params params;
- size_t i;
-
- DEBUG("cleaning up %p", (void *)txq_ctrl);
- txq_free_elts(txq_ctrl);
- if (txq_ctrl->if_qp != NULL) {
- assert(txq_ctrl->priv != NULL);
- assert(txq_ctrl->priv->ctx != NULL);
- assert(txq_ctrl->qp != NULL);
- params = (struct ibv_exp_release_intf_params){
- .comp_mask = 0,
- };
- claim_zero(ibv_exp_release_intf(txq_ctrl->priv->ctx,
- txq_ctrl->if_qp,
- ¶ms));
- }
- if (txq_ctrl->if_cq != NULL) {
- assert(txq_ctrl->priv != NULL);
- assert(txq_ctrl->priv->ctx != NULL);
- assert(txq_ctrl->cq != NULL);
- params = (struct ibv_exp_release_intf_params){
- .comp_mask = 0,
- };
- claim_zero(ibv_exp_release_intf(txq_ctrl->priv->ctx,
- txq_ctrl->if_cq,
- ¶ms));
- }
- if (txq_ctrl->qp != NULL)
- claim_zero(ibv_destroy_qp(txq_ctrl->qp));
- if (txq_ctrl->cq != NULL)
- claim_zero(ibv_destroy_cq(txq_ctrl->cq));
- if (txq_ctrl->rd != NULL) {
- struct ibv_exp_destroy_res_domain_attr attr = {
- .comp_mask = 0,
- };
-
- assert(txq_ctrl->priv != NULL);
- assert(txq_ctrl->priv->ctx != NULL);
- claim_zero(ibv_exp_destroy_res_domain(txq_ctrl->priv->ctx,
- txq_ctrl->rd,
- &attr));
- }
- for (i = 0; (i != RTE_DIM(txq_ctrl->txq.mp2mr)); ++i) {
- if (txq_ctrl->txq.mp2mr[i].mp == NULL)
- break;
- assert(txq_ctrl->txq.mp2mr[i].mr != NULL);
- claim_zero(ibv_dereg_mr(txq_ctrl->txq.mp2mr[i].mr));
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint64_t offloads = (DEV_TX_OFFLOAD_MULTI_SEGS |
+ DEV_TX_OFFLOAD_VLAN_INSERT);
+ struct mlx5_dev_config *config = &priv->config;
+
+ if (config->hw_csum)
+ offloads |= (DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_UDP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM);
+ if (config->tso)
+ offloads |= DEV_TX_OFFLOAD_TCP_TSO;
+ if (config->swp) {
+ if (config->hw_csum)
+ offloads |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
+ if (config->tso)
+ offloads |= (DEV_TX_OFFLOAD_IP_TNL_TSO |
+ DEV_TX_OFFLOAD_UDP_TNL_TSO);
+ }
+ if (config->tunnel_en) {
+ if (config->hw_csum)
+ offloads |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
+ if (config->tso)
+ offloads |= (DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO);
}
- memset(txq_ctrl, 0, sizeof(*txq_ctrl));
+ return offloads;
}
/**
- * Initialize TX queue.
+ * Tx queue presetup checks.
*
- * @param tmpl
- * Pointer to TX queue control template.
- * @param txq_ctrl
- * Pointer to TX queue control.
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static inline int
-txq_setup(struct txq_ctrl *tmpl, struct txq_ctrl *txq_ctrl)
+static int
+mlx5_tx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc)
{
- struct mlx5_qp *qp = to_mqp(tmpl->qp);
- struct ibv_cq *ibcq = tmpl->cq;
- struct mlx5_cq *cq = to_mxxx(cq, cq);
-
- if (cq->cqe_sz != RTE_CACHE_LINE_SIZE) {
- ERROR("Wrong MLX5_CQE_SIZE environment variable value: "
- "it should be set to %u", RTE_CACHE_LINE_SIZE);
- return EINVAL;
- }
- tmpl->txq.cqe_n = log2above(ibcq->cqe);
- tmpl->txq.qp_num_8s = qp->ctrl_seg.qp_num << 8;
- tmpl->txq.wqes =
- (volatile struct mlx5_wqe64 (*)[])
- (uintptr_t)qp->gen_data.sqstart;
- tmpl->txq.wqe_n = qp->sq.wqe_cnt;
- tmpl->txq.qp_db = &qp->gen_data.db[MLX5_SND_DBR];
- tmpl->txq.bf_reg = qp->gen_data.bf->reg;
- tmpl->txq.bf_offset = qp->gen_data.bf->offset;
- tmpl->txq.bf_buf_size = qp->gen_data.bf->buf_size;
- tmpl->txq.cq_db = cq->dbrec;
- tmpl->txq.cqes =
- (volatile struct mlx5_cqe (*)[])
- (uintptr_t)cq->active_buf->buf;
- tmpl->txq.elts =
- (struct rte_mbuf *(*)[1 << tmpl->txq.elts_n])
- ((uintptr_t)txq_ctrl + sizeof(*txq_ctrl));
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (desc <= MLX5_TX_COMP_THRESH) {
+ DRV_LOG(WARNING,
+ "port %u number of descriptors requested for Tx queue"
+ " %u must be higher than MLX5_TX_COMP_THRESH, using %u"
+ " instead of %u",
+ dev->data->port_id, idx, MLX5_TX_COMP_THRESH + 1, desc);
+ desc = MLX5_TX_COMP_THRESH + 1;
+ }
+ if (!rte_is_power_of_2(desc)) {
+ desc = 1 << log2above(desc);
+ DRV_LOG(WARNING,
+ "port %u increased number of descriptors in Tx queue"
+ " %u to the next power of two (%d)",
+ dev->data->port_id, idx, desc);
+ }
+ DRV_LOG(DEBUG, "port %u configuring queue %u for %u descriptors",
+ dev->data->port_id, idx, desc);
+ if (idx >= priv->txqs_n) {
+ DRV_LOG(ERR, "port %u Tx queue index out of range (%u >= %u)",
+ dev->data->port_id, idx, priv->txqs_n);
+ rte_errno = EOVERFLOW;
+ return -rte_errno;
+ }
+ if (!mlx5_txq_releasable(dev, idx)) {
+ rte_errno = EBUSY;
+ DRV_LOG(ERR, "port %u unable to release queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
+ }
+ mlx5_txq_release(dev, idx);
return 0;
}
-
/**
- * Configure a TX queue.
+ * DPDK callback to configure a TX queue.
*
* @param dev
* Pointer to Ethernet device structure.
- * @param txq_ctrl
- * Pointer to TX queue structure.
+ * @param idx
+ * TX queue index.
* @param desc
* Number of descriptors to configure in queue.
* @param socket
* Thresholds parameters.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
- uint16_t desc, unsigned int socket,
- const struct rte_eth_txconf *conf)
+mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
{
- struct priv *priv = mlx5_get_priv(dev);
- struct txq_ctrl tmpl = {
- .priv = priv,
- .socket = socket,
- };
- union {
- struct ibv_exp_query_intf_params params;
- struct ibv_exp_qp_init_attr init;
- struct ibv_exp_res_domain_init_attr rd;
- struct ibv_exp_cq_init_attr cq;
- struct ibv_exp_qp_attr mod;
- struct ibv_exp_cq_attr cq_attr;
- } attr;
- enum ibv_exp_query_intf_status status;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int res;
+
+ res = mlx5_tx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
+ txq_ctrl = mlx5_txq_new(dev, idx, desc, socket, conf);
+ if (!txq_ctrl) {
+ DRV_LOG(ERR, "port %u unable to allocate queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
+ }
+ DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
+ dev->data->port_id, idx);
+ (*priv->txqs)[idx] = &txq_ctrl->txq;
+ return 0;
+}
+
+/**
+ * DPDK callback to configure a TX hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param[in] hairpin_conf
+ * The hairpin binding configuration.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t idx,
+ uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int res;
+
+ res = mlx5_tx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
+ if (hairpin_conf->peer_count != 1 ||
+ hairpin_conf->peers[0].port != dev->data->port_id ||
+ hairpin_conf->peers[0].queue >= priv->rxqs_n) {
+ DRV_LOG(ERR, "port %u unable to setup hairpin queue index %u "
+ " invalid hairpind configuration", dev->data->port_id,
+ idx);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ txq_ctrl = mlx5_txq_hairpin_new(dev, idx, desc, hairpin_conf);
+ if (!txq_ctrl) {
+ DRV_LOG(ERR, "port %u unable to allocate queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
+ }
+ DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
+ dev->data->port_id, idx);
+ (*priv->txqs)[idx] = &txq_ctrl->txq;
+ txq_ctrl->type = MLX5_TXQ_TYPE_HAIRPIN;
+ return 0;
+}
+
+/**
+ * DPDK callback to release a TX queue.
+ *
+ * @param dpdk_txq
+ * Generic TX queue pointer.
+ */
+void
+mlx5_tx_queue_release(void *dpdk_txq)
+{
+ struct mlx5_txq_data *txq = (struct mlx5_txq_data *)dpdk_txq;
+ struct mlx5_txq_ctrl *txq_ctrl;
+ struct mlx5_priv *priv;
+ unsigned int i;
+
+ if (txq == NULL)
+ return;
+ txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
+ priv = txq_ctrl->priv;
+ for (i = 0; (i != priv->txqs_n); ++i)
+ if ((*priv->txqs)[i] == txq) {
+ mlx5_txq_release(ETH_DEV(priv), i);
+ DRV_LOG(DEBUG, "port %u removing Tx queue %u from list",
+ PORT_ID(priv), txq->idx);
+ break;
+ }
+}
+
+/**
+ * Initialize Tx UAR registers for primary process.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ */
+static void
+txq_uar_init(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_proc_priv *ppriv = MLX5_PROC_PRIV(PORT_ID(priv));
+#ifndef RTE_ARCH_64
+ unsigned int lock_idx;
+ const size_t page_size = sysconf(_SC_PAGESIZE);
+#endif
+
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return;
+ assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ assert(ppriv);
+ ppriv->uar_table[txq_ctrl->txq.idx] = txq_ctrl->bf_reg;
+#ifndef RTE_ARCH_64
+ /* Assign an UAR lock according to UAR page number */
+ lock_idx = (txq_ctrl->uar_mmap_offset / page_size) &
+ MLX5_UAR_PAGE_NUM_MASK;
+ txq_ctrl->txq.uar_lock = &priv->uar_lock[lock_idx];
+#endif
+}
+
+/**
+ * Remap UAR register of a Tx queue for secondary process.
+ *
+ * Remapped address is stored at the table in the process private structure of
+ * the device, indexed by queue index.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ * @param fd
+ * Verbs file descriptor to map UAR pages.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+txq_uar_init_secondary(struct mlx5_txq_ctrl *txq_ctrl, int fd)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_proc_priv *ppriv = MLX5_PROC_PRIV(PORT_ID(priv));
+ struct mlx5_txq_data *txq = &txq_ctrl->txq;
+ void *addr;
+ uintptr_t uar_va;
+ uintptr_t offset;
+ const size_t page_size = sysconf(_SC_PAGESIZE);
+
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return 0;
+ assert(ppriv);
+ /*
+ * As rdma-core, UARs are mapped in size of OS page
+ * size. Ref to libmlx5 function: mlx5_init_context()
+ */
+ uar_va = (uintptr_t)txq_ctrl->bf_reg;
+ offset = uar_va & (page_size - 1); /* Offset in page. */
+ addr = mmap(NULL, page_size, PROT_WRITE, MAP_SHARED, fd,
+ txq_ctrl->uar_mmap_offset);
+ if (addr == MAP_FAILED) {
+ DRV_LOG(ERR,
+ "port %u mmap failed for BF reg of txq %u",
+ txq->port_id, txq->idx);
+ rte_errno = ENXIO;
+ return -rte_errno;
+ }
+ addr = RTE_PTR_ADD(addr, offset);
+ ppriv->uar_table[txq->idx] = addr;
+ return 0;
+}
+
+/**
+ * Unmap UAR register of a Tx queue for secondary process.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ */
+static void
+txq_uar_uninit_secondary(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ struct mlx5_proc_priv *ppriv = MLX5_PROC_PRIV(PORT_ID(txq_ctrl->priv));
+ const size_t page_size = sysconf(_SC_PAGESIZE);
+ void *addr;
+
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return;
+ addr = ppriv->uar_table[txq_ctrl->txq.idx];
+ munmap(RTE_PTR_ALIGN_FLOOR(addr, page_size), page_size);
+}
+
+/**
+ * Initialize Tx UAR registers for secondary process.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param fd
+ * Verbs file descriptor to map UAR pages.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_uar_init_secondary(struct rte_eth_dev *dev, int fd)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq;
+ struct mlx5_txq_ctrl *txq_ctrl;
+ unsigned int i;
+ int ret;
+
+ assert(rte_eal_process_type() == RTE_PROC_SECONDARY);
+ for (i = 0; i != priv->txqs_n; ++i) {
+ if (!(*priv->txqs)[i])
+ continue;
+ txq = (*priv->txqs)[i];
+ txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ continue;
+ assert(txq->idx == (uint16_t)i);
+ ret = txq_uar_init_secondary(txq_ctrl, fd);
+ if (ret)
+ goto error;
+ }
+ return 0;
+error:
+ /* Rollback. */
+ do {
+ if (!(*priv->txqs)[i])
+ continue;
+ txq = (*priv->txqs)[i];
+ txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
+ txq_uar_uninit_secondary(txq_ctrl);
+ } while (i--);
+ return -rte_errno;
+}
+
+/**
+ * Create the Tx hairpin queue object.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * Queue index in DPDK Tx queue array
+ *
+ * @return
+ * The hairpin DevX object initialised, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_txq_obj *
+mlx5_txq_obj_hairpin_new(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq_data, struct mlx5_txq_ctrl, txq);
+ struct mlx5_devx_create_sq_attr attr = { 0 };
+ struct mlx5_txq_obj *tmpl = NULL;
int ret = 0;
- if (mlx5_getenv_int("MLX5_ENABLE_CQE_COMPRESSION")) {
- ret = ENOTSUP;
- ERROR("MLX5_ENABLE_CQE_COMPRESSION must never be set");
+ assert(txq_data);
+ assert(!txq_ctrl->obj);
+ tmpl = rte_calloc_socket(__func__, 1, sizeof(*tmpl), 0,
+ txq_ctrl->socket);
+ if (!tmpl) {
+ DRV_LOG(ERR,
+ "port %u Tx queue %u cannot allocate memory resources",
+ dev->data->port_id, txq_data->idx);
+ rte_errno = ENOMEM;
goto error;
}
- (void)conf; /* Thresholds configuration (ignored). */
- assert(desc > MLX5_TX_COMP_THRESH);
- tmpl.txq.elts_n = log2above(desc);
- /* MRs will be registered in mp2mr[] later. */
- attr.rd = (struct ibv_exp_res_domain_init_attr){
- .comp_mask = (IBV_EXP_RES_DOMAIN_THREAD_MODEL |
- IBV_EXP_RES_DOMAIN_MSG_MODEL),
- .thread_model = IBV_EXP_THREAD_SINGLE,
- .msg_model = IBV_EXP_MSG_HIGH_BW,
- };
- tmpl.rd = ibv_exp_create_res_domain(priv->ctx, &attr.rd);
- if (tmpl.rd == NULL) {
- ret = ENOMEM;
- ERROR("%p: RD creation failure: %s",
- (void *)dev, strerror(ret));
+ tmpl->type = MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN;
+ tmpl->txq_ctrl = txq_ctrl;
+ attr.hairpin = 1;
+ attr.tis_lst_sz = 1;
+ /* Workaround for hairpin startup */
+ attr.wq_attr.log_hairpin_num_packets = log2above(32);
+ /* Workaround for packets larger than 1KB */
+ attr.wq_attr.log_hairpin_data_sz =
+ priv->config.hca_attr.log_max_hairpin_wq_data_sz;
+ attr.tis_num = priv->sh->tis->id;
+ tmpl->sq = mlx5_devx_cmd_create_sq(priv->sh->ctx, &attr);
+ if (!tmpl->sq) {
+ DRV_LOG(ERR,
+ "port %u tx hairpin queue %u can't create sq object",
+ dev->data->port_id, idx);
+ rte_errno = errno;
goto error;
}
- attr.cq = (struct ibv_exp_cq_init_attr){
- .comp_mask = IBV_EXP_CQ_INIT_ATTR_RES_DOMAIN,
- .res_domain = tmpl.rd,
+ DRV_LOG(DEBUG, "port %u sxq %u updated with %p", dev->data->port_id,
+ idx, (void *)&tmpl);
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->txqsobj, tmpl, next);
+ return tmpl;
+error:
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ if (tmpl->tis)
+ mlx5_devx_cmd_destroy(tmpl->tis);
+ if (tmpl->sq)
+ mlx5_devx_cmd_destroy(tmpl->sq);
+ rte_errno = ret; /* Restore rte_errno. */
+ return NULL;
+}
+
+/**
+ * Create the Tx queue Verbs object.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * Queue index in DPDK Tx queue array.
+ * @param type
+ * Type of the Tx queue object to create.
+ *
+ * @return
+ * The Verbs object initialised, NULL otherwise and rte_errno is set.
+ */
+struct mlx5_txq_obj *
+mlx5_txq_obj_new(struct rte_eth_dev *dev, uint16_t idx,
+ enum mlx5_txq_obj_type type)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq_data, struct mlx5_txq_ctrl, txq);
+ struct mlx5_txq_obj tmpl;
+ struct mlx5_txq_obj *txq_obj = NULL;
+ union {
+ struct ibv_qp_init_attr_ex init;
+ struct ibv_cq_init_attr_ex cq;
+ struct ibv_qp_attr mod;
+ } attr;
+ unsigned int cqe_n;
+ struct mlx5dv_qp qp = { .comp_mask = MLX5DV_QP_MASK_UAR_MMAP_OFFSET };
+ struct mlx5dv_cq cq_info;
+ struct mlx5dv_obj obj;
+ const int desc = 1 << txq_data->elts_n;
+ int ret = 0;
+
+ if (type == MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN)
+ return mlx5_txq_obj_hairpin_new(dev, idx);
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ /* If using DevX, need additional mask to read tisn value. */
+ if (priv->config.devx && !priv->sh->tdn)
+ qp.comp_mask |= MLX5DV_QP_MASK_RAW_QP_HANDLES;
+#endif
+ assert(txq_data);
+ priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_TX_QUEUE;
+ priv->verbs_alloc_ctx.obj = txq_ctrl;
+ if (mlx5_getenv_int("MLX5_ENABLE_CQE_COMPRESSION")) {
+ DRV_LOG(ERR,
+ "port %u MLX5_ENABLE_CQE_COMPRESSION must never be set",
+ dev->data->port_id);
+ rte_errno = EINVAL;
+ return NULL;
+ }
+ memset(&tmpl, 0, sizeof(struct mlx5_txq_obj));
+ attr.cq = (struct ibv_cq_init_attr_ex){
+ .comp_mask = 0,
};
- tmpl.cq = ibv_exp_create_cq(priv->ctx,
- (((desc / MLX5_TX_COMP_THRESH) - 1) ?
- ((desc / MLX5_TX_COMP_THRESH) - 1) : 1),
- NULL, NULL, 0, &attr.cq);
+ cqe_n = desc / MLX5_TX_COMP_THRESH +
+ 1 + MLX5_TX_COMP_THRESH_INLINE_DIV;
+ tmpl.cq = mlx5_glue->create_cq(priv->sh->ctx, cqe_n, NULL, NULL, 0);
if (tmpl.cq == NULL) {
- ret = ENOMEM;
- ERROR("%p: CQ creation failure: %s",
- (void *)dev, strerror(ret));
+ DRV_LOG(ERR, "port %u Tx queue %u CQ creation failure",
+ dev->data->port_id, idx);
+ rte_errno = errno;
goto error;
}
- DEBUG("priv->device_attr.max_qp_wr is %d",
- priv->device_attr.max_qp_wr);
- DEBUG("priv->device_attr.max_sge is %d",
- priv->device_attr.max_sge);
- attr.init = (struct ibv_exp_qp_init_attr){
+ attr.init = (struct ibv_qp_init_attr_ex){
/* CQ to be associated with the send queue. */
.send_cq = tmpl.cq,
/* CQ to be associated with the receive queue. */
.recv_cq = tmpl.cq,
.cap = {
/* Max number of outstanding WRs. */
- .max_send_wr = ((priv->device_attr.max_qp_wr < desc) ?
- priv->device_attr.max_qp_wr :
- desc),
+ .max_send_wr =
+ ((priv->sh->device_attr.orig_attr.max_qp_wr <
+ desc) ?
+ priv->sh->device_attr.orig_attr.max_qp_wr :
+ desc),
/*
* Max number of scatter/gather elements in a WR,
* must be 1 to prevent libmlx5 from trying to affect
* too much memory. TX gather is not impacted by the
- * priv->device_attr.max_sge limit and will still work
+ * device_attr.max_sge limit and will still work
* properly.
*/
.max_send_sge = 1,
},
.qp_type = IBV_QPT_RAW_PACKET,
- /* Do *NOT* enable this, completions events are managed per
- * TX burst. */
+ /*
+ * Do *NOT* enable this, completions events are managed per
+ * Tx burst.
+ */
.sq_sig_all = 0,
- .pd = priv->pd,
- .res_domain = tmpl.rd,
- .comp_mask = (IBV_EXP_QP_INIT_ATTR_PD |
- IBV_EXP_QP_INIT_ATTR_RES_DOMAIN),
+ .pd = priv->sh->pd,
+ .comp_mask = IBV_QP_INIT_ATTR_PD,
};
- if (priv->txq_inline && (priv->txqs_n >= priv->txqs_inline)) {
- tmpl.txq.max_inline =
- ((priv->txq_inline + (RTE_CACHE_LINE_SIZE - 1)) /
- RTE_CACHE_LINE_SIZE);
- attr.init.cap.max_inline_data =
- tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE;
- }
- tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init);
+ if (txq_data->inlen_send)
+ attr.init.cap.max_inline_data = txq_ctrl->max_inline_data;
+ if (txq_data->tso_en) {
+ attr.init.max_tso_header = txq_ctrl->max_tso_header;
+ attr.init.comp_mask |= IBV_QP_INIT_ATTR_MAX_TSO_HEADER;
+ }
+ tmpl.qp = mlx5_glue->create_qp_ex(priv->sh->ctx, &attr.init);
if (tmpl.qp == NULL) {
- ret = (errno ? errno : EINVAL);
- ERROR("%p: QP creation failure: %s",
- (void *)dev, strerror(ret));
+ DRV_LOG(ERR, "port %u Tx queue %u QP creation failure",
+ dev->data->port_id, idx);
+ rte_errno = errno;
goto error;
}
- DEBUG("TX queue capabilities: max_send_wr=%u, max_send_sge=%u,"
- " max_inline_data=%u",
- attr.init.cap.max_send_wr,
- attr.init.cap.max_send_sge,
- attr.init.cap.max_inline_data);
- attr.mod = (struct ibv_exp_qp_attr){
+ attr.mod = (struct ibv_qp_attr){
/* Move the QP to this state. */
.qp_state = IBV_QPS_INIT,
- /* Primary port number. */
- .port_num = priv->port
+ /* IB device port number. */
+ .port_num = (uint8_t)priv->ibv_port,
};
- ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod,
- (IBV_EXP_QP_STATE | IBV_EXP_QP_PORT));
- if (ret) {
- ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
- (void *)dev, strerror(ret));
- goto error;
- }
- ret = txq_setup(&tmpl, txq_ctrl);
+ ret = mlx5_glue->modify_qp(tmpl.qp, &attr.mod,
+ (IBV_QP_STATE | IBV_QP_PORT));
if (ret) {
- ERROR("%p: cannot initialize TX queue structure: %s",
- (void *)dev, strerror(ret));
+ DRV_LOG(ERR,
+ "port %u Tx queue %u QP state to IBV_QPS_INIT failed",
+ dev->data->port_id, idx);
+ rte_errno = errno;
goto error;
}
- txq_alloc_elts(&tmpl, desc);
- attr.mod = (struct ibv_exp_qp_attr){
+ attr.mod = (struct ibv_qp_attr){
.qp_state = IBV_QPS_RTR
};
- ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE);
+ ret = mlx5_glue->modify_qp(tmpl.qp, &attr.mod, IBV_QP_STATE);
if (ret) {
- ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
- (void *)dev, strerror(ret));
+ DRV_LOG(ERR,
+ "port %u Tx queue %u QP state to IBV_QPS_RTR failed",
+ dev->data->port_id, idx);
+ rte_errno = errno;
goto error;
}
attr.mod.qp_state = IBV_QPS_RTS;
- ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE);
+ ret = mlx5_glue->modify_qp(tmpl.qp, &attr.mod, IBV_QP_STATE);
if (ret) {
- ERROR("%p: QP state to IBV_QPS_RTS failed: %s",
- (void *)dev, strerror(ret));
+ DRV_LOG(ERR,
+ "port %u Tx queue %u QP state to IBV_QPS_RTS failed",
+ dev->data->port_id, idx);
+ rte_errno = errno;
goto error;
}
- attr.params = (struct ibv_exp_query_intf_params){
- .intf_scope = IBV_EXP_INTF_GLOBAL,
- .intf = IBV_EXP_INTF_CQ,
- .obj = tmpl.cq,
- };
- tmpl.if_cq = ibv_exp_query_intf(priv->ctx, &attr.params, &status);
- if (tmpl.if_cq == NULL) {
- ret = EINVAL;
- ERROR("%p: CQ interface family query failed with status %d",
- (void *)dev, status);
+ txq_obj = rte_calloc_socket(__func__, 1, sizeof(struct mlx5_txq_obj), 0,
+ txq_ctrl->socket);
+ if (!txq_obj) {
+ DRV_LOG(ERR, "port %u Tx queue %u cannot allocate memory",
+ dev->data->port_id, idx);
+ rte_errno = ENOMEM;
goto error;
}
- attr.params = (struct ibv_exp_query_intf_params){
- .intf_scope = IBV_EXP_INTF_GLOBAL,
- .intf = IBV_EXP_INTF_QP_BURST,
- .intf_version = 1,
- .obj = tmpl.qp,
- /* Enable multi-packet send if supported. */
- .family_flags =
- ((priv->mps && !priv->sriov) ?
- IBV_EXP_QP_BURST_CREATE_ENABLE_MULTI_PACKET_SEND_WR :
- 0),
- };
- tmpl.if_qp = ibv_exp_query_intf(priv->ctx, &attr.params, &status);
- if (tmpl.if_qp == NULL) {
- ret = EINVAL;
- ERROR("%p: QP interface family query failed with status %d",
- (void *)dev, status);
+ obj.cq.in = tmpl.cq;
+ obj.cq.out = &cq_info;
+ obj.qp.in = tmpl.qp;
+ obj.qp.out = &qp;
+ ret = mlx5_glue->dv_init_obj(&obj, MLX5DV_OBJ_CQ | MLX5DV_OBJ_QP);
+ if (ret != 0) {
+ rte_errno = errno;
goto error;
}
- /* Clean up txq in case we're reinitializing it. */
- DEBUG("%p: cleaning-up old txq just in case", (void *)txq_ctrl);
- txq_cleanup(txq_ctrl);
- *txq_ctrl = tmpl;
- DEBUG("%p: txq updated with %p", (void *)txq_ctrl, (void *)&tmpl);
- /* Pre-register known mempools. */
- rte_mempool_walk(txq_mp2mr_iter, txq_ctrl);
- assert(ret == 0);
- return 0;
+ if (cq_info.cqe_size != RTE_CACHE_LINE_SIZE) {
+ DRV_LOG(ERR,
+ "port %u wrong MLX5_CQE_SIZE environment variable"
+ " value: it should be set to %u",
+ dev->data->port_id, RTE_CACHE_LINE_SIZE);
+ rte_errno = EINVAL;
+ goto error;
+ }
+ txq_data->cqe_n = log2above(cq_info.cqe_cnt);
+ txq_data->cqe_s = 1 << txq_data->cqe_n;
+ txq_data->cqe_m = txq_data->cqe_s - 1;
+ txq_data->qp_num_8s = tmpl.qp->qp_num << 8;
+ txq_data->wqes = qp.sq.buf;
+ txq_data->wqe_n = log2above(qp.sq.wqe_cnt);
+ txq_data->wqe_s = 1 << txq_data->wqe_n;
+ txq_data->wqe_m = txq_data->wqe_s - 1;
+ txq_data->wqes_end = txq_data->wqes + txq_data->wqe_s;
+ txq_data->qp_db = &qp.dbrec[MLX5_SND_DBR];
+ txq_data->cq_db = cq_info.dbrec;
+ txq_data->cqes = (volatile struct mlx5_cqe *)cq_info.buf;
+ txq_data->cq_ci = 0;
+#ifndef NDEBUG
+ txq_data->cq_pi = 0;
+#endif
+ txq_data->wqe_ci = 0;
+ txq_data->wqe_pi = 0;
+ txq_data->wqe_comp = 0;
+ txq_data->wqe_thres = txq_data->wqe_s / MLX5_TX_COMP_THRESH_INLINE_DIV;
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ /*
+ * If using DevX need to query and store TIS transport domain value.
+ * This is done once per port.
+ * Will use this value on Rx, when creating matching TIR.
+ */
+ if (priv->config.devx && !priv->sh->tdn) {
+ ret = mlx5_devx_cmd_qp_query_tis_td(tmpl.qp, qp.tisn,
+ &priv->sh->tdn);
+ if (ret) {
+ DRV_LOG(ERR, "Fail to query port %u Tx queue %u QP TIS "
+ "transport domain", dev->data->port_id, idx);
+ rte_errno = EINVAL;
+ goto error;
+ } else {
+ DRV_LOG(DEBUG, "port %u Tx queue %u TIS number %d "
+ "transport domain %d", dev->data->port_id,
+ idx, qp.tisn, priv->sh->tdn);
+ }
+ }
+#endif
+ txq_obj->qp = tmpl.qp;
+ txq_obj->cq = tmpl.cq;
+ rte_atomic32_inc(&txq_obj->refcnt);
+ txq_ctrl->bf_reg = qp.bf.reg;
+ if (qp.comp_mask & MLX5DV_QP_MASK_UAR_MMAP_OFFSET) {
+ txq_ctrl->uar_mmap_offset = qp.uar_mmap_offset;
+ DRV_LOG(DEBUG, "port %u: uar_mmap_offset 0x%"PRIx64,
+ dev->data->port_id, txq_ctrl->uar_mmap_offset);
+ } else {
+ DRV_LOG(ERR,
+ "port %u failed to retrieve UAR info, invalid"
+ " libmlx5.so",
+ dev->data->port_id);
+ rte_errno = EINVAL;
+ goto error;
+ }
+ txq_uar_init(txq_ctrl);
+ LIST_INSERT_HEAD(&priv->txqsobj, txq_obj, next);
+ txq_obj->txq_ctrl = txq_ctrl;
+ priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
+ return txq_obj;
error:
- txq_cleanup(&tmpl);
- assert(ret > 0);
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ if (tmpl.cq)
+ claim_zero(mlx5_glue->destroy_cq(tmpl.cq));
+ if (tmpl.qp)
+ claim_zero(mlx5_glue->destroy_qp(tmpl.qp));
+ if (txq_obj)
+ rte_free(txq_obj);
+ priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
+ rte_errno = ret; /* Restore rte_errno. */
+ return NULL;
+}
+
+/**
+ * Get an Tx queue Verbs object.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * Queue index in DPDK Tx queue array.
+ *
+ * @return
+ * The Verbs object if it exists.
+ */
+struct mlx5_txq_obj *
+mlx5_txq_obj_get(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *txq_ctrl;
+
+ if (idx >= priv->txqs_n)
+ return NULL;
+ if (!(*priv->txqs)[idx])
+ return NULL;
+ txq_ctrl = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
+ if (txq_ctrl->obj)
+ rte_atomic32_inc(&txq_ctrl->obj->refcnt);
+ return txq_ctrl->obj;
+}
+
+/**
+ * Release an Tx verbs queue object.
+ *
+ * @param txq_obj
+ * Verbs Tx queue object.
+ *
+ * @return
+ * 1 while a reference on it exists, 0 when freed.
+ */
+int
+mlx5_txq_obj_release(struct mlx5_txq_obj *txq_obj)
+{
+ assert(txq_obj);
+ if (rte_atomic32_dec_and_test(&txq_obj->refcnt)) {
+ if (txq_obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN) {
+ if (txq_obj->tis)
+ claim_zero(mlx5_devx_cmd_destroy(txq_obj->tis));
+ } else {
+ claim_zero(mlx5_glue->destroy_qp(txq_obj->qp));
+ claim_zero(mlx5_glue->destroy_cq(txq_obj->cq));
+ }
+ LIST_REMOVE(txq_obj, next);
+ rte_free(txq_obj);
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * Verify the Verbs Tx queue list is empty
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * The number of object not released.
+ */
+int
+mlx5_txq_obj_verify(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ int ret = 0;
+ struct mlx5_txq_obj *txq_obj;
+
+ LIST_FOREACH(txq_obj, &priv->txqsobj, next) {
+ DRV_LOG(DEBUG, "port %u Verbs Tx queue %u still referenced",
+ dev->data->port_id, txq_obj->txq_ctrl->txq.idx);
+ ++ret;
+ }
return ret;
}
/**
- * DPDK callback to configure a TX queue.
+ * Calculate the total number of WQEBB for Tx queue.
+ *
+ * Simplified version of calc_sq_size() in rdma-core.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ *
+ * @return
+ * The number of WQEBB.
+ */
+static int
+txq_calc_wqebb_cnt(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ unsigned int wqe_size;
+ const unsigned int desc = 1 << txq_ctrl->txq.elts_n;
+
+ wqe_size = MLX5_WQE_CSEG_SIZE +
+ MLX5_WQE_ESEG_SIZE +
+ MLX5_WSEG_SIZE -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ txq_ctrl->max_inline_data;
+ return rte_align32pow2(wqe_size * desc) / MLX5_WQE_SIZE;
+}
+
+/**
+ * Calculate the maximal inline data size for Tx queue.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ *
+ * @return
+ * The maximal inline data size.
+ */
+static unsigned int
+txq_calc_inline_max(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ const unsigned int desc = 1 << txq_ctrl->txq.elts_n;
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ unsigned int wqe_size;
+
+ wqe_size = priv->sh->device_attr.orig_attr.max_qp_wr / desc;
+ if (!wqe_size)
+ return 0;
+ /*
+ * This calculation is derived from tthe source of
+ * mlx5_calc_send_wqe() in rdma_core library.
+ */
+ wqe_size = wqe_size * MLX5_WQE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WSEG_SIZE -
+ MLX5_WSEG_SIZE +
+ MLX5_DSEG_MIN_INLINE_SIZE;
+ return wqe_size;
+}
+
+/**
+ * Set Tx queue parameters from device configuration.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ */
+static void
+txq_set_params(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int inlen_send; /* Inline data for ordinary SEND.*/
+ unsigned int inlen_empw; /* Inline data for enhanced MPW. */
+ unsigned int inlen_mode; /* Minimal required Inline data. */
+ unsigned int txqs_inline; /* Min Tx queues to enable inline. */
+ uint64_t dev_txoff = priv->dev_data->dev_conf.txmode.offloads;
+ bool tso = txq_ctrl->txq.offloads & (DEV_TX_OFFLOAD_TCP_TSO |
+ DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO |
+ DEV_TX_OFFLOAD_IP_TNL_TSO |
+ DEV_TX_OFFLOAD_UDP_TNL_TSO);
+ bool vlan_inline;
+ unsigned int temp;
+
+ if (config->txqs_inline == MLX5_ARG_UNSET)
+ txqs_inline =
+#if defined(RTE_ARCH_ARM64)
+ (priv->pci_dev->id.device_id ==
+ PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) ?
+ MLX5_INLINE_MAX_TXQS_BLUEFIELD :
+#endif
+ MLX5_INLINE_MAX_TXQS;
+ else
+ txqs_inline = (unsigned int)config->txqs_inline;
+ inlen_send = (config->txq_inline_max == MLX5_ARG_UNSET) ?
+ MLX5_SEND_DEF_INLINE_LEN :
+ (unsigned int)config->txq_inline_max;
+ inlen_empw = (config->txq_inline_mpw == MLX5_ARG_UNSET) ?
+ MLX5_EMPW_DEF_INLINE_LEN :
+ (unsigned int)config->txq_inline_mpw;
+ inlen_mode = (config->txq_inline_min == MLX5_ARG_UNSET) ?
+ 0 : (unsigned int)config->txq_inline_min;
+ if (config->mps != MLX5_MPW_ENHANCED)
+ inlen_empw = 0;
+ /*
+ * If there is requested minimal amount of data to inline
+ * we MUST enable inlining. This is a case for ConnectX-4
+ * which usually requires L2 inlined for correct operating
+ * and ConnectX-4LX which requires L2-L4 inlined to
+ * support E-Switch Flows.
+ */
+ if (inlen_mode) {
+ if (inlen_mode <= MLX5_ESEG_MIN_INLINE_SIZE) {
+ /*
+ * Optimize minimal inlining for single
+ * segment packets to fill one WQEBB
+ * without gaps.
+ */
+ temp = MLX5_ESEG_MIN_INLINE_SIZE;
+ } else {
+ temp = inlen_mode - MLX5_ESEG_MIN_INLINE_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WSEG_SIZE) +
+ MLX5_ESEG_MIN_INLINE_SIZE;
+ temp = RTE_MIN(temp, MLX5_SEND_MAX_INLINE_LEN);
+ }
+ if (temp != inlen_mode) {
+ DRV_LOG(INFO,
+ "port %u minimal required inline setting"
+ " aligned from %u to %u",
+ PORT_ID(priv), inlen_mode, temp);
+ inlen_mode = temp;
+ }
+ }
+ /*
+ * If port is configured to support VLAN insertion and device
+ * does not support this feature by HW (for NICs before ConnectX-5
+ * or in case of wqe_vlan_insert flag is not set) we must enable
+ * data inline on all queues because it is supported by single
+ * tx_burst routine.
+ */
+ txq_ctrl->txq.vlan_en = config->hw_vlan_insert;
+ vlan_inline = (dev_txoff & DEV_TX_OFFLOAD_VLAN_INSERT) &&
+ !config->hw_vlan_insert;
+ /*
+ * If there are few Tx queues it is prioritized
+ * to save CPU cycles and disable data inlining at all.
+ */
+ if (inlen_send && priv->txqs_n >= txqs_inline) {
+ /*
+ * The data sent with ordinal MLX5_OPCODE_SEND
+ * may be inlined in Ethernet Segment, align the
+ * length accordingly to fit entire WQEBBs.
+ */
+ temp = RTE_MAX(inlen_send,
+ MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE);
+ temp -= MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WQE_SIZE);
+ temp += MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE;
+ temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE * 2);
+ temp = RTE_MIN(temp, MLX5_SEND_MAX_INLINE_LEN);
+ temp = RTE_MAX(temp, inlen_mode);
+ if (temp != inlen_send) {
+ DRV_LOG(INFO,
+ "port %u ordinary send inline setting"
+ " aligned from %u to %u",
+ PORT_ID(priv), inlen_send, temp);
+ inlen_send = temp;
+ }
+ /*
+ * Not aligned to cache lines, but to WQEs.
+ * First bytes of data (initial alignment)
+ * is going to be copied explicitly at the
+ * beginning of inlining buffer in Ethernet
+ * Segment.
+ */
+ assert(inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
+ assert(inlen_send <= MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE * 2);
+ } else if (inlen_mode) {
+ /*
+ * If minimal inlining is requested we must
+ * enable inlining in general, despite the
+ * number of configured queues. Ignore the
+ * txq_inline_max devarg, this is not
+ * full-featured inline.
+ */
+ inlen_send = inlen_mode;
+ inlen_empw = 0;
+ } else if (vlan_inline) {
+ /*
+ * Hardware does not report offload for
+ * VLAN insertion, we must enable data inline
+ * to implement feature by software.
+ */
+ inlen_send = MLX5_ESEG_MIN_INLINE_SIZE;
+ inlen_empw = 0;
+ } else {
+ inlen_send = 0;
+ inlen_empw = 0;
+ }
+ txq_ctrl->txq.inlen_send = inlen_send;
+ txq_ctrl->txq.inlen_mode = inlen_mode;
+ txq_ctrl->txq.inlen_empw = 0;
+ if (inlen_send && inlen_empw && priv->txqs_n >= txqs_inline) {
+ /*
+ * The data sent with MLX5_OPCODE_ENHANCED_MPSW
+ * may be inlined in Data Segment, align the
+ * length accordingly to fit entire WQEBBs.
+ */
+ temp = RTE_MAX(inlen_empw,
+ MLX5_WQE_SIZE + MLX5_DSEG_MIN_INLINE_SIZE);
+ temp -= MLX5_DSEG_MIN_INLINE_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WQE_SIZE);
+ temp += MLX5_DSEG_MIN_INLINE_SIZE;
+ temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX +
+ MLX5_DSEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE);
+ temp = RTE_MIN(temp, MLX5_EMPW_MAX_INLINE_LEN);
+ if (temp != inlen_empw) {
+ DRV_LOG(INFO,
+ "port %u enhanced empw inline setting"
+ " aligned from %u to %u",
+ PORT_ID(priv), inlen_empw, temp);
+ inlen_empw = temp;
+ }
+ assert(inlen_empw >= MLX5_ESEG_MIN_INLINE_SIZE);
+ assert(inlen_empw <= MLX5_WQE_SIZE_MAX +
+ MLX5_DSEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE);
+ txq_ctrl->txq.inlen_empw = inlen_empw;
+ }
+ txq_ctrl->max_inline_data = RTE_MAX(inlen_send, inlen_empw);
+ if (tso) {
+ txq_ctrl->max_tso_header = MLX5_MAX_TSO_HEADER;
+ txq_ctrl->max_inline_data = RTE_MAX(txq_ctrl->max_inline_data,
+ MLX5_MAX_TSO_HEADER);
+ txq_ctrl->txq.tso_en = 1;
+ }
+ txq_ctrl->txq.tunnel_en = config->tunnel_en | config->swp;
+ txq_ctrl->txq.swp_en = ((DEV_TX_OFFLOAD_IP_TNL_TSO |
+ DEV_TX_OFFLOAD_UDP_TNL_TSO |
+ DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) &
+ txq_ctrl->txq.offloads) && config->swp;
+}
+
+/**
+ * Adjust Tx queue data inline parameters for large queue sizes.
+ * The data inline feature requires multiple WQEs to fit the packets,
+ * and if the large amount of Tx descriptors is requested by application
+ * the total WQE amount may exceed the hardware capabilities. If the
+ * default inline setting are used we can try to adjust these ones and
+ * meet the hardware requirements and not exceed the queue size.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ *
+ * @return
+ * Zero on success, otherwise the parameters can not be adjusted.
+ */
+static int
+txq_adjust_params(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int max_inline;
+
+ max_inline = txq_calc_inline_max(txq_ctrl);
+ if (!txq_ctrl->txq.inlen_send) {
+ /*
+ * Inline data feature is not engaged at all.
+ * There is nothing to adjust.
+ */
+ return 0;
+ }
+ if (txq_ctrl->max_inline_data <= max_inline) {
+ /*
+ * The requested inline data length does not
+ * exceed queue capabilities.
+ */
+ return 0;
+ }
+ if (txq_ctrl->txq.inlen_mode > max_inline) {
+ DRV_LOG(ERR,
+ "minimal data inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_mode, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline &&
+ config->txq_inline_max != MLX5_ARG_UNSET &&
+ config->txq_inline_max > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_max requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline &&
+ config->txq_inline_mpw != MLX5_ARG_UNSET &&
+ config->txq_inline_mpw > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_mpw requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.tso_en && max_inline < MLX5_MAX_TSO_HEADER) {
+ DRV_LOG(ERR,
+ "tso header inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ MLX5_MAX_TSO_HEADER, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_max (%u->%u)"
+ " due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_send = max_inline;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_mpw (%u->%u)"
+ "due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_empw = max_inline;
+ }
+ txq_ctrl->max_inline_data = RTE_MAX(txq_ctrl->txq.inlen_send,
+ txq_ctrl->txq.inlen_empw);
+ assert(txq_ctrl->max_inline_data <= max_inline);
+ assert(txq_ctrl->txq.inlen_mode <= max_inline);
+ assert(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_send);
+ assert(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_empw);
+ return 0;
+error:
+ rte_errno = ENOMEM;
+ return -ENOMEM;
+}
+
+/**
+ * Create a DPDK Tx queue.
*
* @param dev
- * Pointer to Ethernet device structure.
+ * Pointer to Ethernet device.
* @param idx
* TX queue index.
* @param desc
* @param socket
* NUMA socket on which memory must be allocated.
* @param[in] conf
- * Thresholds parameters.
+ * Thresholds parameters.
*
* @return
- * 0 on success, negative errno value on failure.
+ * A DPDK queue object on success, NULL otherwise and rte_errno is set.
*/
-int
-mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
- unsigned int socket, const struct rte_eth_txconf *conf)
+struct mlx5_txq_ctrl *
+mlx5_txq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
{
- struct priv *priv = dev->data->dev_private;
- struct txq *txq = (*priv->txqs)[idx];
- struct txq_ctrl *txq_ctrl = container_of(txq, struct txq_ctrl, txq);
- int ret;
-
- if (mlx5_is_secondary())
- return -E_RTE_SECONDARY;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *tmpl;
- priv_lock(priv);
- if (desc <= MLX5_TX_COMP_THRESH) {
- WARN("%p: number of descriptors requested for TX queue %u"
- " must be higher than MLX5_TX_COMP_THRESH, using"
- " %u instead of %u",
- (void *)dev, idx, MLX5_TX_COMP_THRESH + 1, desc);
- desc = MLX5_TX_COMP_THRESH + 1;
+ tmpl = rte_calloc_socket("TXQ", 1,
+ sizeof(*tmpl) +
+ desc * sizeof(struct rte_mbuf *),
+ 0, socket);
+ if (!tmpl) {
+ rte_errno = ENOMEM;
+ return NULL;
}
- if (!rte_is_power_of_2(desc)) {
- desc = 1 << log2above(desc);
- WARN("%p: increased number of descriptors in TX queue %u"
- " to the next power of two (%d)",
- (void *)dev, idx, desc);
+ if (mlx5_mr_btree_init(&tmpl->txq.mr_ctrl.cache_bh,
+ MLX5_MR_BTREE_CACHE_N, socket)) {
+ /* rte_errno is already set. */
+ goto error;
}
- DEBUG("%p: configuring queue %u for %u descriptors",
- (void *)dev, idx, desc);
- if (idx >= priv->txqs_n) {
- ERROR("%p: queue index out of range (%u >= %u)",
- (void *)dev, idx, priv->txqs_n);
- priv_unlock(priv);
- return -EOVERFLOW;
- }
- if (txq != NULL) {
- DEBUG("%p: reusing already allocated queue index %u (%p)",
- (void *)dev, idx, (void *)txq);
- if (priv->started) {
- priv_unlock(priv);
- return -EEXIST;
- }
- (*priv->txqs)[idx] = NULL;
- txq_cleanup(txq_ctrl);
- } else {
- txq_ctrl =
- rte_calloc_socket("TXQ", 1,
- sizeof(*txq_ctrl) +
- desc * sizeof(struct rte_mbuf *),
- 0, socket);
- if (txq_ctrl == NULL) {
- ERROR("%p: unable to allocate queue index %u",
- (void *)dev, idx);
- priv_unlock(priv);
- return -ENOMEM;
- }
+ /* Save pointer of global generation number to check memory event. */
+ tmpl->txq.mr_ctrl.dev_gen_ptr = &priv->sh->mr.dev_gen;
+ assert(desc > MLX5_TX_COMP_THRESH);
+ tmpl->txq.offloads = conf->offloads |
+ dev->data->dev_conf.txmode.offloads;
+ tmpl->priv = priv;
+ tmpl->socket = socket;
+ tmpl->txq.elts_n = log2above(desc);
+ tmpl->txq.elts_s = desc;
+ tmpl->txq.elts_m = desc - 1;
+ tmpl->txq.port_id = dev->data->port_id;
+ tmpl->txq.idx = idx;
+ txq_set_params(tmpl);
+ if (txq_adjust_params(tmpl))
+ goto error;
+ if (txq_calc_wqebb_cnt(tmpl) >
+ priv->sh->device_attr.orig_attr.max_qp_wr) {
+ DRV_LOG(ERR,
+ "port %u Tx WQEBB count (%d) exceeds the limit (%d),"
+ " try smaller queue size",
+ dev->data->port_id, txq_calc_wqebb_cnt(tmpl),
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ rte_errno = ENOMEM;
+ goto error;
}
- ret = txq_ctrl_setup(dev, txq_ctrl, desc, socket, conf);
- if (ret)
- rte_free(txq_ctrl);
- else {
- txq_ctrl->txq.stats.idx = idx;
- DEBUG("%p: adding TX queue %p to list",
- (void *)dev, (void *)txq_ctrl);
- (*priv->txqs)[idx] = &txq_ctrl->txq;
- /* Update send callback. */
- priv_select_tx_function(priv);
- }
- priv_unlock(priv);
- return -ret;
+ rte_atomic32_inc(&tmpl->refcnt);
+ tmpl->type = MLX5_TXQ_TYPE_STANDARD;
+ LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
+ return tmpl;
+error:
+ rte_free(tmpl);
+ return NULL;
}
/**
- * DPDK callback to release a TX queue.
+ * Create a DPDK Tx hairpin queue.
*
- * @param dpdk_txq
- * Generic TX queue pointer.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param hairpin_conf
+ * The hairpin configuration.
+ *
+ * @return
+ * A DPDK queue object on success, NULL otherwise and rte_errno is set.
*/
-void
-mlx5_tx_queue_release(void *dpdk_txq)
+struct mlx5_txq_ctrl *
+mlx5_txq_hairpin_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
{
- struct txq *txq = (struct txq *)dpdk_txq;
- struct txq_ctrl *txq_ctrl;
- struct priv *priv;
- unsigned int i;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *tmpl;
- if (mlx5_is_secondary())
- return;
-
- if (txq == NULL)
- return;
- txq_ctrl = container_of(txq, struct txq_ctrl, txq);
- priv = txq_ctrl->priv;
- priv_lock(priv);
- for (i = 0; (i != priv->txqs_n); ++i)
- if ((*priv->txqs)[i] == txq) {
- DEBUG("%p: removing TX queue %p from list",
- (void *)priv->dev, (void *)txq_ctrl);
- (*priv->txqs)[i] = NULL;
- break;
- }
- txq_cleanup(txq_ctrl);
- rte_free(txq_ctrl);
- priv_unlock(priv);
+ tmpl = rte_calloc_socket("TXQ", 1,
+ sizeof(*tmpl), 0, SOCKET_ID_ANY);
+ if (!tmpl) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ tmpl->priv = priv;
+ tmpl->socket = SOCKET_ID_ANY;
+ tmpl->txq.elts_n = log2above(desc);
+ tmpl->txq.port_id = dev->data->port_id;
+ tmpl->txq.idx = idx;
+ tmpl->hairpin_conf = *hairpin_conf;
+ tmpl->type = MLX5_TXQ_TYPE_HAIRPIN;
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
+ return tmpl;
}
/**
- * DPDK callback for TX in secondary processes.
+ * Get a Tx queue.
*
- * This function configures all queues from primary process information
- * if necessary before reverting to the normal TX burst callback.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * TX queue index.
*
- * @param dpdk_txq
- * Generic pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
+ * @return
+ * A pointer to the queue if it exists.
+ */
+struct mlx5_txq_ctrl *
+mlx5_txq_get(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *ctrl = NULL;
+
+ if ((*priv->txqs)[idx]) {
+ ctrl = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl,
+ txq);
+ mlx5_txq_obj_get(dev, idx);
+ rte_atomic32_inc(&ctrl->refcnt);
+ }
+ return ctrl;
+}
+
+/**
+ * Release a Tx queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * TX queue index.
*
* @return
- * Number of packets successfully transmitted (<= pkts_n).
+ * 1 while a reference on it exists, 0 when freed.
*/
-uint16_t
-mlx5_tx_burst_secondary_setup(void *dpdk_txq, struct rte_mbuf **pkts,
- uint16_t pkts_n)
+int
+mlx5_txq_release(struct rte_eth_dev *dev, uint16_t idx)
{
- struct txq *txq = dpdk_txq;
- struct txq_ctrl *txq_ctrl = container_of(txq, struct txq_ctrl, txq);
- struct priv *priv = mlx5_secondary_data_setup(txq_ctrl->priv);
- struct priv *primary_priv;
- unsigned int index;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *txq;
- if (priv == NULL)
+ if (!(*priv->txqs)[idx])
return 0;
- primary_priv =
- mlx5_secondary_data[priv->dev->data->port_id].primary_priv;
- /* Look for queue index in both private structures. */
- for (index = 0; index != priv->txqs_n; ++index)
- if (((*primary_priv->txqs)[index] == txq) ||
- ((*priv->txqs)[index] == txq))
- break;
- if (index == priv->txqs_n)
+ txq = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
+ if (txq->obj && !mlx5_txq_obj_release(txq->obj))
+ txq->obj = NULL;
+ if (rte_atomic32_dec_and_test(&txq->refcnt)) {
+ txq_free_elts(txq);
+ mlx5_mr_btree_free(&txq->txq.mr_ctrl.cache_bh);
+ LIST_REMOVE(txq, next);
+ rte_free(txq);
+ (*priv->txqs)[idx] = NULL;
return 0;
- txq = (*priv->txqs)[index];
- return priv->dev->tx_pkt_burst(txq, pkts, pkts_n);
+ }
+ return 1;
+}
+
+/**
+ * Verify if the queue can be released.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * TX queue index.
+ *
+ * @return
+ * 1 if the queue can be released.
+ */
+int
+mlx5_txq_releasable(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *txq;
+
+ if (!(*priv->txqs)[idx])
+ return -1;
+ txq = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
+ return (rte_atomic32_read(&txq->refcnt) == 1);
+}
+
+/**
+ * Verify the Tx Queue list is empty
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * The number of object not released.
+ */
+int
+mlx5_txq_verify(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *txq_ctrl;
+ int ret = 0;
+
+ LIST_FOREACH(txq_ctrl, &priv->txqsctrl, next) {
+ DRV_LOG(DEBUG, "port %u Tx queue %u still referenced",
+ dev->data->port_id, txq_ctrl->txq.idx);
+ ++ret;
+ }
+ return ret;
}
git.droids-corp.org / dpdk.git / blobdiff