offloads |= (DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
DEV_TX_OFFLOAD_GRE_TNL_TSO);
}
-#ifdef HAVE_IBV_FLOW_DV_SUPPORT
- if (config->dv_flow_en)
- offloads |= DEV_TX_OFFLOAD_MATCH_METADATA;
-#endif
return offloads;
}
/**
- * DPDK callback to configure a TX queue.
+ * Tx queue presetup checks.
*
* @param dev
* Pointer to Ethernet device structure.
* @param idx
- * TX queue index.
+ * Tx queue index.
* @param desc
* Number of descriptors to configure in queue.
- * @param socket
- * NUMA socket on which memory must be allocated.
- * @param[in] conf
- * Thresholds parameters.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-int
-mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
- unsigned int socket, const struct rte_eth_txconf *conf)
+static int
+mlx5_tx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_txq_data *txq = (*priv->txqs)[idx];
- struct mlx5_txq_ctrl *txq_ctrl =
- container_of(txq, struct mlx5_txq_ctrl, txq);
if (desc <= MLX5_TX_COMP_THRESH) {
DRV_LOG(WARNING,
return -rte_errno;
}
mlx5_txq_release(dev, idx);
+ return 0;
+}
+/**
+ * DPDK callback to configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int res;
+
+ res = mlx5_tx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
txq_ctrl = mlx5_txq_new(dev, idx, desc, socket, conf);
if (!txq_ctrl) {
DRV_LOG(ERR, "port %u unable to allocate queue index %u",
return 0;
}
+/**
+ * DPDK callback to configure a TX hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param[in] hairpin_conf
+ * The hairpin binding configuration.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t idx,
+ uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int res;
+
+ res = mlx5_tx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
+ if (hairpin_conf->peer_count != 1 ||
+ hairpin_conf->peers[0].port != dev->data->port_id ||
+ hairpin_conf->peers[0].queue >= priv->rxqs_n) {
+ DRV_LOG(ERR, "port %u unable to setup hairpin queue index %u "
+ " invalid hairpind configuration", dev->data->port_id,
+ idx);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ txq_ctrl = mlx5_txq_hairpin_new(dev, idx, desc, hairpin_conf);
+ if (!txq_ctrl) {
+ DRV_LOG(ERR, "port %u unable to allocate queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
+ }
+ DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
+ dev->data->port_id, idx);
+ (*priv->txqs)[idx] = &txq_ctrl->txq;
+ txq_ctrl->type = MLX5_TXQ_TYPE_HAIRPIN;
+ return 0;
+}
+
/**
* DPDK callback to release a TX queue.
*
const size_t page_size = sysconf(_SC_PAGESIZE);
#endif
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return;
assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
assert(ppriv);
ppriv->uar_table[txq_ctrl->txq.idx] = txq_ctrl->bf_reg;
uintptr_t offset;
const size_t page_size = sysconf(_SC_PAGESIZE);
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return 0;
assert(ppriv);
/*
* As rdma-core, UARs are mapped in size of OS page
const size_t page_size = sysconf(_SC_PAGESIZE);
void *addr;
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return;
addr = ppriv->uar_table[txq_ctrl->txq.idx];
munmap(RTE_PTR_ALIGN_FLOOR(addr, page_size), page_size);
}
continue;
txq = (*priv->txqs)[i];
txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ continue;
assert(txq->idx == (uint16_t)i);
ret = txq_uar_init_secondary(txq_ctrl, fd);
if (ret)
return -rte_errno;
}
+/**
+ * Create the Tx hairpin queue object.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * Queue index in DPDK Tx queue array
+ *
+ * @return
+ * The hairpin DevX object initialised, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_txq_obj *
+mlx5_txq_obj_hairpin_new(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq_data, struct mlx5_txq_ctrl, txq);
+ struct mlx5_devx_create_sq_attr attr = { 0 };
+ struct mlx5_txq_obj *tmpl = NULL;
+ int ret = 0;
+
+ assert(txq_data);
+ assert(!txq_ctrl->obj);
+ tmpl = rte_calloc_socket(__func__, 1, sizeof(*tmpl), 0,
+ txq_ctrl->socket);
+ if (!tmpl) {
+ DRV_LOG(ERR,
+ "port %u Tx queue %u cannot allocate memory resources",
+ dev->data->port_id, txq_data->idx);
+ rte_errno = ENOMEM;
+ goto error;
+ }
+ tmpl->type = MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN;
+ tmpl->txq_ctrl = txq_ctrl;
+ attr.hairpin = 1;
+ attr.tis_lst_sz = 1;
+ /* Workaround for hairpin startup */
+ attr.wq_attr.log_hairpin_num_packets = log2above(32);
+ /* Workaround for packets larger than 1KB */
+ attr.wq_attr.log_hairpin_data_sz =
+ priv->config.hca_attr.log_max_hairpin_wq_data_sz;
+ attr.tis_num = priv->sh->tis->id;
+ tmpl->sq = mlx5_devx_cmd_create_sq(priv->sh->ctx, &attr);
+ if (!tmpl->sq) {
+ DRV_LOG(ERR,
+ "port %u tx hairpin queue %u can't create sq object",
+ dev->data->port_id, idx);
+ rte_errno = errno;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "port %u sxq %u updated with %p", dev->data->port_id,
+ idx, (void *)&tmpl);
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->txqsobj, tmpl, next);
+ return tmpl;
+error:
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ if (tmpl->tis)
+ mlx5_devx_cmd_destroy(tmpl->tis);
+ if (tmpl->sq)
+ mlx5_devx_cmd_destroy(tmpl->sq);
+ rte_errno = ret; /* Restore rte_errno. */
+ return NULL;
+}
+
/**
* Create the Tx queue Verbs object.
*
* Pointer to Ethernet device.
* @param idx
* Queue index in DPDK Tx queue array.
+ * @param type
+ * Type of the Tx queue object to create.
*
* @return
* The Verbs object initialised, NULL otherwise and rte_errno is set.
*/
-struct mlx5_txq_ibv *
-mlx5_txq_ibv_new(struct rte_eth_dev *dev, uint16_t idx)
+struct mlx5_txq_obj *
+mlx5_txq_obj_new(struct rte_eth_dev *dev, uint16_t idx,
+ enum mlx5_txq_obj_type type)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
struct mlx5_txq_ctrl *txq_ctrl =
container_of(txq_data, struct mlx5_txq_ctrl, txq);
- struct mlx5_txq_ibv tmpl;
- struct mlx5_txq_ibv *txq_ibv = NULL;
+ struct mlx5_txq_obj tmpl;
+ struct mlx5_txq_obj *txq_obj = NULL;
union {
struct ibv_qp_init_attr_ex init;
struct ibv_cq_init_attr_ex cq;
const int desc = 1 << txq_data->elts_n;
int ret = 0;
+ if (type == MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN)
+ return mlx5_txq_obj_hairpin_new(dev, idx);
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
/* If using DevX, need additional mask to read tisn value. */
if (priv->config.devx && !priv->sh->tdn)
rte_errno = EINVAL;
return NULL;
}
- memset(&tmpl, 0, sizeof(struct mlx5_txq_ibv));
+ memset(&tmpl, 0, sizeof(struct mlx5_txq_obj));
attr.cq = (struct ibv_cq_init_attr_ex){
.comp_mask = 0,
};
rte_errno = errno;
goto error;
}
- txq_ibv = rte_calloc_socket(__func__, 1, sizeof(struct mlx5_txq_ibv), 0,
+ txq_obj = rte_calloc_socket(__func__, 1, sizeof(struct mlx5_txq_obj), 0,
txq_ctrl->socket);
- if (!txq_ibv) {
+ if (!txq_obj) {
DRV_LOG(ERR, "port %u Tx queue %u cannot allocate memory",
dev->data->port_id, idx);
rte_errno = ENOMEM;
}
}
#endif
- txq_ibv->qp = tmpl.qp;
- txq_ibv->cq = tmpl.cq;
- rte_atomic32_inc(&txq_ibv->refcnt);
+ txq_obj->qp = tmpl.qp;
+ txq_obj->cq = tmpl.cq;
+ rte_atomic32_inc(&txq_obj->refcnt);
txq_ctrl->bf_reg = qp.bf.reg;
if (qp.comp_mask & MLX5DV_QP_MASK_UAR_MMAP_OFFSET) {
txq_ctrl->uar_mmap_offset = qp.uar_mmap_offset;
goto error;
}
txq_uar_init(txq_ctrl);
- LIST_INSERT_HEAD(&priv->txqsibv, txq_ibv, next);
- txq_ibv->txq_ctrl = txq_ctrl;
+ LIST_INSERT_HEAD(&priv->txqsobj, txq_obj, next);
+ txq_obj->txq_ctrl = txq_ctrl;
priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
- return txq_ibv;
+ return txq_obj;
error:
ret = rte_errno; /* Save rte_errno before cleanup. */
if (tmpl.cq)
claim_zero(mlx5_glue->destroy_cq(tmpl.cq));
if (tmpl.qp)
claim_zero(mlx5_glue->destroy_qp(tmpl.qp));
- if (txq_ibv)
- rte_free(txq_ibv);
+ if (txq_obj)
+ rte_free(txq_obj);
priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
rte_errno = ret; /* Restore rte_errno. */
return NULL;
* @return
* The Verbs object if it exists.
*/
-struct mlx5_txq_ibv *
-mlx5_txq_ibv_get(struct rte_eth_dev *dev, uint16_t idx)
+struct mlx5_txq_obj *
+mlx5_txq_obj_get(struct rte_eth_dev *dev, uint16_t idx)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_ctrl *txq_ctrl;
if (!(*priv->txqs)[idx])
return NULL;
txq_ctrl = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
- if (txq_ctrl->ibv)
- rte_atomic32_inc(&txq_ctrl->ibv->refcnt);
- return txq_ctrl->ibv;
+ if (txq_ctrl->obj)
+ rte_atomic32_inc(&txq_ctrl->obj->refcnt);
+ return txq_ctrl->obj;
}
/**
* Release an Tx verbs queue object.
*
- * @param txq_ibv
+ * @param txq_obj
* Verbs Tx queue object.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
int
-mlx5_txq_ibv_release(struct mlx5_txq_ibv *txq_ibv)
+mlx5_txq_obj_release(struct mlx5_txq_obj *txq_obj)
{
- assert(txq_ibv);
- if (rte_atomic32_dec_and_test(&txq_ibv->refcnt)) {
- claim_zero(mlx5_glue->destroy_qp(txq_ibv->qp));
- claim_zero(mlx5_glue->destroy_cq(txq_ibv->cq));
- LIST_REMOVE(txq_ibv, next);
- rte_free(txq_ibv);
+ assert(txq_obj);
+ if (rte_atomic32_dec_and_test(&txq_obj->refcnt)) {
+ if (txq_obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN) {
+ if (txq_obj->tis)
+ claim_zero(mlx5_devx_cmd_destroy(txq_obj->tis));
+ } else {
+ claim_zero(mlx5_glue->destroy_qp(txq_obj->qp));
+ claim_zero(mlx5_glue->destroy_cq(txq_obj->cq));
+ }
+ LIST_REMOVE(txq_obj, next);
+ rte_free(txq_obj);
return 0;
}
return 1;
* The number of object not released.
*/
int
-mlx5_txq_ibv_verify(struct rte_eth_dev *dev)
+mlx5_txq_obj_verify(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
int ret = 0;
- struct mlx5_txq_ibv *txq_ibv;
+ struct mlx5_txq_obj *txq_obj;
- LIST_FOREACH(txq_ibv, &priv->txqsibv, next) {
+ LIST_FOREACH(txq_obj, &priv->txqsobj, next) {
DRV_LOG(DEBUG, "port %u Verbs Tx queue %u still referenced",
- dev->data->port_id, txq_ibv->txq_ctrl->txq.idx);
+ dev->data->port_id, txq_obj->txq_ctrl->txq.idx);
++ret;
}
return ret;
return rte_align32pow2(wqe_size * desc) / MLX5_WQE_SIZE;
}
+/**
+ * Calculate the maximal inline data size for Tx queue.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ *
+ * @return
+ * The maximal inline data size.
+ */
+static unsigned int
+txq_calc_inline_max(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ const unsigned int desc = 1 << txq_ctrl->txq.elts_n;
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ unsigned int wqe_size;
+
+ wqe_size = priv->sh->device_attr.orig_attr.max_qp_wr / desc;
+ if (!wqe_size)
+ return 0;
+ /*
+ * This calculation is derived from tthe source of
+ * mlx5_calc_send_wqe() in rdma_core library.
+ */
+ wqe_size = wqe_size * MLX5_WQE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WSEG_SIZE -
+ MLX5_WSEG_SIZE +
+ MLX5_DSEG_MIN_INLINE_SIZE;
+ return wqe_size;
+}
+
/**
* Set Tx queue parameters from device configuration.
*
* may be inlined in Ethernet Segment, align the
* length accordingly to fit entire WQEBBs.
*/
- temp = (inlen_send / MLX5_WQE_SIZE) * MLX5_WQE_SIZE +
- MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE;
+ temp = RTE_MAX(inlen_send,
+ MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE);
+ temp -= MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WQE_SIZE);
+ temp += MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE;
temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX +
MLX5_ESEG_MIN_INLINE_SIZE -
MLX5_WQE_CSEG_SIZE -
* may be inlined in Data Segment, align the
* length accordingly to fit entire WQEBBs.
*/
- temp = (inlen_empw + MLX5_WQE_SIZE - 1) / MLX5_WQE_SIZE;
- temp = temp * MLX5_WQE_SIZE +
- MLX5_DSEG_MIN_INLINE_SIZE - MLX5_WQE_DSEG_SIZE;
+ temp = RTE_MAX(inlen_empw,
+ MLX5_WQE_SIZE + MLX5_DSEG_MIN_INLINE_SIZE);
+ temp -= MLX5_DSEG_MIN_INLINE_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WQE_SIZE);
+ temp += MLX5_DSEG_MIN_INLINE_SIZE;
temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX +
MLX5_DSEG_MIN_INLINE_SIZE -
MLX5_WQE_CSEG_SIZE -
txq_ctrl->txq.offloads) && config->swp;
}
+/**
+ * Adjust Tx queue data inline parameters for large queue sizes.
+ * The data inline feature requires multiple WQEs to fit the packets,
+ * and if the large amount of Tx descriptors is requested by application
+ * the total WQE amount may exceed the hardware capabilities. If the
+ * default inline setting are used we can try to adjust these ones and
+ * meet the hardware requirements and not exceed the queue size.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ *
+ * @return
+ * Zero on success, otherwise the parameters can not be adjusted.
+ */
+static int
+txq_adjust_params(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int max_inline;
+
+ max_inline = txq_calc_inline_max(txq_ctrl);
+ if (!txq_ctrl->txq.inlen_send) {
+ /*
+ * Inline data feature is not engaged at all.
+ * There is nothing to adjust.
+ */
+ return 0;
+ }
+ if (txq_ctrl->max_inline_data <= max_inline) {
+ /*
+ * The requested inline data length does not
+ * exceed queue capabilities.
+ */
+ return 0;
+ }
+ if (txq_ctrl->txq.inlen_mode > max_inline) {
+ DRV_LOG(ERR,
+ "minimal data inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_mode, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline &&
+ config->txq_inline_max != MLX5_ARG_UNSET &&
+ config->txq_inline_max > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_max requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline &&
+ config->txq_inline_mpw != MLX5_ARG_UNSET &&
+ config->txq_inline_mpw > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_mpw requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.tso_en && max_inline < MLX5_MAX_TSO_HEADER) {
+ DRV_LOG(ERR,
+ "tso header inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ MLX5_MAX_TSO_HEADER, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.orig_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_max (%u->%u)"
+ " due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_send = max_inline;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_mpw (%u->%u)"
+ "due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_empw = max_inline;
+ }
+ txq_ctrl->max_inline_data = RTE_MAX(txq_ctrl->txq.inlen_send,
+ txq_ctrl->txq.inlen_empw);
+ assert(txq_ctrl->max_inline_data <= max_inline);
+ assert(txq_ctrl->txq.inlen_mode <= max_inline);
+ assert(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_send);
+ assert(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_empw);
+ return 0;
+error:
+ rte_errno = ENOMEM;
+ return -ENOMEM;
+}
+
/**
* Create a DPDK Tx queue.
*
tmpl->txq.port_id = dev->data->port_id;
tmpl->txq.idx = idx;
txq_set_params(tmpl);
+ if (txq_adjust_params(tmpl))
+ goto error;
if (txq_calc_wqebb_cnt(tmpl) >
priv->sh->device_attr.orig_attr.max_qp_wr) {
DRV_LOG(ERR,
goto error;
}
rte_atomic32_inc(&tmpl->refcnt);
+ tmpl->type = MLX5_TXQ_TYPE_STANDARD;
LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
return tmpl;
error:
return NULL;
}
+/**
+ * Create a DPDK Tx hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param hairpin_conf
+ * The hairpin configuration.
+ *
+ * @return
+ * A DPDK queue object on success, NULL otherwise and rte_errno is set.
+ */
+struct mlx5_txq_ctrl *
+mlx5_txq_hairpin_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *tmpl;
+
+ tmpl = rte_calloc_socket("TXQ", 1,
+ sizeof(*tmpl), 0, SOCKET_ID_ANY);
+ if (!tmpl) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ tmpl->priv = priv;
+ tmpl->socket = SOCKET_ID_ANY;
+ tmpl->txq.elts_n = log2above(desc);
+ tmpl->txq.port_id = dev->data->port_id;
+ tmpl->txq.idx = idx;
+ tmpl->hairpin_conf = *hairpin_conf;
+ tmpl->type = MLX5_TXQ_TYPE_HAIRPIN;
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
+ return tmpl;
+}
+
/**
* Get a Tx queue.
*
if ((*priv->txqs)[idx]) {
ctrl = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl,
txq);
- mlx5_txq_ibv_get(dev, idx);
+ mlx5_txq_obj_get(dev, idx);
rte_atomic32_inc(&ctrl->refcnt);
}
return ctrl;
if (!(*priv->txqs)[idx])
return 0;
txq = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
- if (txq->ibv && !mlx5_txq_ibv_release(txq->ibv))
- txq->ibv = NULL;
+ if (txq->obj && !mlx5_txq_obj_release(txq->obj))
+ txq->obj = NULL;
if (rte_atomic32_dec_and_test(&txq->refcnt)) {
txq_free_elts(txq);
mlx5_mr_btree_free(&txq->txq.mr_ctrl.cache_bh);
git.droids-corp.org / dpdk.git / blobdiff