static int nfp_net_rss_hash_write(struct rte_eth_dev *dev,
struct rte_eth_rss_conf *rss_conf);
static int nfp_set_mac_addr(struct rte_eth_dev *dev,
- struct ether_addr *mac_addr);
+ struct rte_ether_addr *mac_addr);
/* The offset of the queue controller queues in the PCIe Target */
#define NFP_PCIE_QUEUE(_q) (0x80000 + (NFP_QCP_QUEUE_ADDR_SZ * ((_q) & 0xff)))
}
int
-nfp_set_mac_addr(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+nfp_set_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr)
{
struct nfp_net_hw *hw;
uint32_t update, ctrl;
return -EIO;
/*
- * Allocating rte mbuffs for configured rx queues.
+ * Allocating rte mbufs for configured rx queues.
* This requires queues being enabled before
*/
if (nfp_net_rx_freelist_setup(dev) < 0) {
dev_info->max_rx_queues = (uint16_t)hw->max_rx_queues;
dev_info->max_tx_queues = (uint16_t)hw->max_tx_queues;
- dev_info->min_rx_bufsize = ETHER_MIN_MTU;
+ dev_info->min_rx_bufsize = RTE_ETHER_MIN_MTU;
dev_info->max_rx_pktlen = hw->max_mtu;
/* Next should change when PF support is implemented */
dev_info->max_mac_addrs = 1;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* check that mtu is within the allowed range */
- if ((mtu < ETHER_MIN_MTU) || ((uint32_t)mtu > hw->max_mtu))
+ if (mtu < RTE_ETHER_MIN_MTU || (uint32_t)mtu > hw->max_mtu)
return -EINVAL;
/* mtu setting is forbidden if port is started */
}
/* switch to jumbo mode if needed */
- if ((uint32_t)mtu > ETHER_MAX_LEN)
+ if ((uint32_t)mtu > RTE_ETHER_MAX_LEN)
dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
else
dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
if (rxq == NULL)
return -ENOMEM;
- /* Hw queues mapping based on firmware confifguration */
+ /* Hw queues mapping based on firmware configuration */
rxq->qidx = queue_idx;
rxq->fl_qcidx = queue_idx * hw->stride_rx;
rxq->rx_qcidx = rxq->fl_qcidx + (hw->stride_rx - 1);
socket_id);
if (tz == NULL) {
- PMD_DRV_LOG(ERR, "Error allocatig rx dma");
+ PMD_DRV_LOG(ERR, "Error allocating rx dma");
nfp_net_rx_queue_release(rxq);
return -ENOMEM;
}
/*
* RX path design:
*
- * There are some decissions to take:
+ * There are some decisions to take:
* 1) How to check DD RX descriptors bit
* 2) How and when to allocate new mbufs
*
rte_rmb();
/*
- * We got a packet. Let's alloc a new mbuff for refilling the
+ * We got a packet. Let's alloc a new mbuf for refilling the
* free descriptor ring as soon as possible
*/
new_mb = rte_pktmbuf_alloc(rxq->mem_pool);
nb_hold++;
/*
- * Grab the mbuff and refill the descriptor with the
- * previously allocated mbuff
+ * Grab the mbuf and refill the descriptor with the
+ * previously allocated mbuf
*/
mb = rxb->mbuf;
rxb->mbuf = new_mb;
return -EINVAL;
}
- /* Filling the received mbuff with packet info */
+ /* Filling the received mbuf with packet info */
if (hw->rx_offset)
mb->data_off = RTE_PKTMBUF_HEADROOM + hw->rx_offset;
else
mb->ol_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
}
- /* Adding the mbuff to the mbuff array passed by the app */
+ /* Adding the mbuf to the mbuf array passed by the app */
rx_pkts[avail++] = mb;
/* Now resetting and updating the descriptor */
case PCI_DEVICE_ID_NFP6000_PF_NIC:
case PCI_DEVICE_ID_NFP6000_VF_NIC:
start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_TXQ);
- tx_bar_off = start_q * NFP_QCP_QUEUE_ADDR_SZ;
+ tx_bar_off = (uint64_t)start_q * NFP_QCP_QUEUE_ADDR_SZ;
start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_RXQ);
- rx_bar_off = start_q * NFP_QCP_QUEUE_ADDR_SZ;
+ rx_bar_off = (uint64_t)start_q * NFP_QCP_QUEUE_ADDR_SZ;
break;
default:
PMD_DRV_LOG(ERR, "nfp_net: no device ID matching");
hw->ver = nn_cfg_readl(hw, NFP_NET_CFG_VERSION);
hw->cap = nn_cfg_readl(hw, NFP_NET_CFG_CAP);
hw->max_mtu = nn_cfg_readl(hw, NFP_NET_CFG_MAX_MTU);
- hw->mtu = ETHER_MTU;
+ hw->mtu = RTE_ETHER_MTU;
/* VLAN insertion is incompatible with LSOv2 */
if (hw->cap & NFP_NET_CFG_CTRL_LSO2)
rte_spinlock_init(&hw->reconfig_lock);
/* Allocating memory for mac addr */
- eth_dev->data->mac_addrs = rte_zmalloc("mac_addr", ETHER_ADDR_LEN, 0);
+ eth_dev->data->mac_addrs = rte_zmalloc("mac_addr",
+ RTE_ETHER_ADDR_LEN, 0);
if (eth_dev->data->mac_addrs == NULL) {
PMD_INIT_LOG(ERR, "Failed to space for MAC address");
err = -ENOMEM;
nfp_net_vf_read_mac(hw);
}
- if (!is_valid_assigned_ether_addr((struct ether_addr *)&hw->mac_addr)) {
+ if (!rte_is_valid_assigned_ether_addr(
+ (struct rte_ether_addr *)&hw->mac_addr)) {
PMD_INIT_LOG(INFO, "Using random mac address for port %d",
port);
/* Using random mac addresses for VFs */
- eth_random_addr(&hw->mac_addr[0]);
+ rte_eth_random_addr(&hw->mac_addr[0]);
nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
}
/* Copying mac address to DPDK eth_dev struct */
- ether_addr_copy((struct ether_addr *)hw->mac_addr,
+ rte_ether_addr_copy((struct rte_ether_addr *)hw->mac_addr,
ð_dev->data->mac_addrs[0]);
if (!(hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR))
if (ret < 0) {
RTE_LOG(ERR, PMD, "%s: bind error (%d). Service failed\n",
__func__, errno);
+ close(sockfd);
return ret;
}
if (ret < 0) {
RTE_LOG(ERR, PMD, "%s: listen error(%d). Service failed\n",
__func__, errno);
+ close(sockfd);
return ret;
}
RTE_LOG(ERR, PMD, "%s: accept call error (%d)\n",
__func__, errno);
RTE_LOG(ERR, PMD, "%s: service failed\n", __func__);
+ close(sockfd);
return -EIO;
}
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
- if (fw_f > 0)
+ if (fw_f >= 0)
goto read_fw;
/* Then try the PCI name */
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
- if (fw_f > 0)
+ if (fw_f >= 0)
goto read_fw;
/* Finally try the card type and media */