net/qede/base: update firmware to 8.30.12.0

[dpdk.git] / drivers / net / qede / base / ecore_init_fw_funcs.h

diff --git a/drivers/net/qede/base/ecore_init_fw_funcs.h b/drivers/net/qede/base/ecore_init_fw_funcs.h
index a258bd1..ab560e5 100644 (file)
--- a/drivers/net/qede/base/ecore_init_fw_funcs.h
+++ b/drivers/net/qede/base/ecore_init_fw_funcs.h
@@ -27,10 +27,10 @@ struct init_qm_pq_params;
  * @return The required host memory size in 4KB units.
  */
 u32 ecore_qm_pf_mem_size(u32 num_pf_cids,
-                        u32 num_vf_cids,
-                        u32 num_tids,
-                        u16 num_pf_pqs,
-                        u16 num_vf_pqs);
+                                                u32 num_vf_cids,
+                                                u32 num_tids,
+                                                u16 num_pf_pqs,
+                                                u16 num_vf_pqs);
 
 /**
  * @brief ecore_qm_common_rt_init - Prepare QM runtime init values for engine
@@ -77,6 +77,7 @@ int ecore_qm_common_rt_init(struct ecore_hwfn *p_hwfn,
  *                be 0. otherwise, the weight must be non-zero.
  * @param pf_rl - rate limit in Mb/sec units. a value of 0 means don't
  *                configure. ignored if PF RL is globally disabled.
+ * @param link_speed -           link speed in Mbps.
  * @param pq_params - array of size (num_pf_pqs+num_vf_pqs) with parameters for
  *                    each Tx PQ associated with the specified PF.
  * @param vport_params - array of size num_vports with parameters for each
@@ -99,6 +100,7 @@ int ecore_qm_pf_rt_init(struct ecore_hwfn *p_hwfn,
                        u8 num_vports,
                        u16 pf_wfq,
                        u32 pf_rl,
+                       u32 link_speed,
                        struct init_qm_pq_params *pq_params,
                        struct init_qm_vport_params *vport_params);
 
@@ -153,17 +155,19 @@ int ecore_init_vport_wfq(struct ecore_hwfn *p_hwfn,
  * @brief ecore_init_vport_rl - Initializes the rate limit of the specified
  * VPORT.
  *
- * @param p_hwfn       - HW device data
- * @param p_ptt                - ptt window used for writing the registers
- * @param vport_id     - VPORT ID
- * @param vport_rl     - rate limit in Mb/sec units
+ * @param p_hwfn -            HW device data
+ * @param p_ptt -             ptt window used for writing the registers
+ * @param vport_id -   VPORT ID
+ * @param vport_rl -   rate limit in Mb/sec units
+ * @param link_speed - link speed in Mbps.
  *
  * @return 0 on success, -1 on error.
  */
 int ecore_init_vport_rl(struct ecore_hwfn *p_hwfn,
                                                struct ecore_ptt *p_ptt,
                                                u8 vport_id,
-                                               u32 vport_rl);
+                                               u32 vport_rl,
+                                               u32 link_speed);
 
 /**
  * @brief ecore_send_qm_stop_cmd  Sends a stop command to the QM
@@ -264,7 +268,8 @@ void ecore_init_brb_ram(struct ecore_hwfn *p_hwfn,
  * @param p_hwfn -         HW device data
  * @param ethType - etherType to configure
  */
-void ecore_set_port_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn, u32 ethType);
+void ecore_set_port_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
+                                     u32 ethType);
 #endif /* UNUSED_HSI_FUNC */
 
 /**
@@ -333,33 +338,35 @@ void ecore_set_gft_event_id_cm_hdr(struct ecore_hwfn *p_hwfn,
                                   struct ecore_ptt *p_ptt);
 
 /**
- * @brief ecore_set_rfs_mode_disable - Disable and configure HW for RFS
+ * @brief ecore_gft_disable - Disable and GFT
  *
  * @param p_hwfn -   HW device data
  * @param p_ptt -   ptt window used for writing the registers.
- * @param pf_id - pf on which to disable RFS.
+ * @param pf_id - pf on which to disable GFT.
  */
-void ecore_set_rfs_mode_disable(struct ecore_hwfn *p_hwfn,
-                               struct ecore_ptt *p_ptt,
-                               u16 pf_id);
+void ecore_gft_disable(struct ecore_hwfn *p_hwfn,
+                                               struct ecore_ptt *p_ptt,
+                                               u16 pf_id);
 
 /**
-* @brief ecore_set_rfs_mode_enable - enable and configure HW for RFS
+ * @brief ecore_gft_config - Enable and configure HW for GFT
 *
 * @param p_ptt - ptt window used for writing the registers.
-* @param pf_id - pf on which to enable RFS.
+ * @param pf_id - pf on which to enable GFT.
 * @param tcp   - set profile tcp packets.
 * @param udp   - set profile udp  packet.
 * @param ipv4  - set profile ipv4 packet.
 * @param ipv6  - set profile ipv6 packet.
+ * @param profile_type -  define packet same fields. Use enum gft_profile_type.
 */
-void ecore_set_rfs_mode_enable(struct ecore_hwfn *p_hwfn,
+void ecore_gft_config(struct ecore_hwfn *p_hwfn,
        struct ecore_ptt *p_ptt,
        u16 pf_id,
        bool tcp,
        bool udp,
        bool ipv4,
-       bool ipv6);
+       bool ipv6,
+       enum gft_profile_type profile_type);
 #endif /* UNUSED_HSI_FUNC */
 
 /**
@@ -413,8 +420,10 @@ void ecore_enable_context_validation(struct ecore_hwfn *p_hwfn,
  * @param ctx_type -   context type.
  * @param cid -                context cid.
  */
-void ecore_calc_session_ctx_validation(void *p_ctx_mem, u16 ctx_size,
-                                      u8 ctx_type, u32 cid);
+void ecore_calc_session_ctx_validation(void *p_ctx_mem,
+                                      u16 ctx_size,
+                                      u8 ctx_type,
+                                      u32 cid);
 
 /**
  * @brief ecore_calc_task_ctx_validation - Calcualte validation byte for task
@@ -425,8 +434,11 @@ void ecore_calc_session_ctx_validation(void *p_ctx_mem, u16 ctx_size,
  * @param ctx_type -   context type.
  * @param tid -                    context tid.
  */
-void ecore_calc_task_ctx_validation(void *p_ctx_mem, u16 ctx_size, u8 ctx_type,
+void ecore_calc_task_ctx_validation(void *p_ctx_mem,
+                                   u16 ctx_size,
+                                   u8 ctx_type,
                                    u32 tid);
+
 /**
  * @brief ecore_memset_session_ctx - Memset session context to 0 while
  * preserving validation bytes.