struct lldp_status_params_s {
u32 prefix_seq_num;
u32 status; /* TBD */
- /* Holds remote Chassis ID TLV header, subtype and 9B of payload.
- */
+ /* Holds remote Chassis ID TLV header, subtype and 9B of payload. */
u32 peer_chassis_id[LLDP_CHASSIS_ID_STAT_LEN];
- /* Holds remote Port ID TLV header, subtype and 9B of payload.
- */
+ /* Holds remote Port ID TLV header, subtype and 9B of payload. */
u32 peer_port_id[LLDP_PORT_ID_STAT_LEN];
u32 suffix_seq_num;
};
#define DCBX_APP_PROTOCOL_ID_SHIFT 16
};
+
/* FW structure in BE */
struct dcbx_app_priority_feature {
u32 flags;
#define DCBX_APP_ERROR_MASK 0x00000004
#define DCBX_APP_ERROR_SHIFT 2
/* Not in use
- * #define DCBX_APP_DEFAULT_PRI_MASK 0x00000f00
- * #define DCBX_APP_DEFAULT_PRI_SHIFT 8
- */
+ #define DCBX_APP_DEFAULT_PRI_MASK 0x00000f00
+ #define DCBX_APP_DEFAULT_PRI_SHIFT 8
+ */
#define DCBX_APP_MAX_TCS_MASK 0x0000f000
#define DCBX_APP_MAX_TCS_SHIFT 12
#define DCBX_APP_NUM_ENTRIES_MASK 0x00ff0000
u32 prefix_seq_num;
u32 flags;
/*
- * #define DCBX_CONFIG_VERSION_MASK 0x00000007
- * #define DCBX_CONFIG_VERSION_SHIFT 0
- * #define DCBX_CONFIG_VERSION_DISABLED 0
- * #define DCBX_CONFIG_VERSION_IEEE 1
- * #define DCBX_CONFIG_VERSION_CEE 2
- * #define DCBX_CONFIG_VERSION_STATIC 4
- */
+ #define DCBX_CONFIG_VERSION_MASK 0x00000007
+ #define DCBX_CONFIG_VERSION_SHIFT 0
+ #define DCBX_CONFIG_VERSION_DISABLED 0
+ #define DCBX_CONFIG_VERSION_IEEE 1
+ #define DCBX_CONFIG_VERSION_CEE 2
+ #define DCBX_CONFIG_VERSION_STATIC 4
+ */
struct dcbx_features features;
u32 suffix_seq_num;
};
u32 debug_mb_offset;
u32 phymod_dbg_mb_offset;
struct couple_mode_teaming cmt;
+/* Temperature in Celcius (-255C / +255C), measured every second. */
s32 internal_temperature;
u32 mfw_ver;
u32 running_bundle_id;
/* MTU size per funciton is needed for the OV feature */
u32 mtu_size;
- /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
+/* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
+
/* For PCP values 0-3 use the map lower */
/* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
* 0x0000FF00 - PCP 2, 0x000000FF PCP 3
#define FUNC_MF_CFG_PAUSE_ON_HOST_RING 0x00000002
#define FUNC_MF_CFG_PAUSE_ON_HOST_RING_SHIFT 0x00000001
+
#define FUNC_MF_CFG_PROTOCOL_MASK 0x000000f0
#define FUNC_MF_CFG_PROTOCOL_SHIFT 4
#define FUNC_MF_CFG_PROTOCOL_ETHERNET 0x00000000
#define DRV_MSG_CODE_INITIATE_PF_FLR 0x02010000
#define DRV_MSG_CODE_VF_DISABLED_DONE 0xc0000000
#define DRV_MSG_CODE_CFG_VF_MSIX 0xc0010000
+/* Param is either DRV_MB_PARAM_NVM_PUT_FILE_BEGIN_MFW/IMAGE */
#define DRV_MSG_CODE_NVM_PUT_FILE_BEGIN 0x00010000
+/* Param should be set to the transaction size (up to 64 bytes) */
#define DRV_MSG_CODE_NVM_PUT_FILE_DATA 0x00020000
+/* MFW will place the file offset and len in file_att struct */
#define DRV_MSG_CODE_NVM_GET_FILE_ATT 0x00030000
+/* Read 32bytes of nvram data. Param is [0:23] – Offset [24:31] –
+ * Len in Bytes
+ */
#define DRV_MSG_CODE_NVM_READ_NVRAM 0x00050000
+/* Writes up to 32Bytes to nvram. Param is [0:23] – Offset [24:31] –
+ * Len in Bytes. In case this address is in the range of secured file in
+ * secured mode, the operation will fail
+ */
#define DRV_MSG_CODE_NVM_WRITE_NVRAM 0x00060000
+/* Delete a file from nvram. Param is image_type. */
#define DRV_MSG_CODE_NVM_DEL_FILE 0x00080000
+/* Reset MCP when no NVM operation is going on, and no drivers are loaded.
+ * In case operation succeed, MCP will not ack back.
+ */
#define DRV_MSG_CODE_MCP_RESET 0x00090000
+/* Temporary command to set secure mode, where the param is 0 (None secure) /
+ * 1 (Secure) / 2 (Full-Secure)
+ */
#define DRV_MSG_CODE_SET_SECURE_MODE 0x000a0000
+/* Param: [0:15] - Address, [16:18] - lane# (0/1/2/3 - for single lane,
+ * 4/5 - for dual lanes, 6 - for all lanes, [28] - PMD reg, [29] - select port,
+ * [30:31] - port
+ */
#define DRV_MSG_CODE_PHY_RAW_READ 0x000b0000
+/* Param: [0:15] - Address, [16:18] - lane# (0/1/2/3 - for single lane,
+ * 4/5 - for dual lanes, 6 - for all lanes, [28] - PMD reg, [29] - select port,
+ * [30:31] - port
+ */
#define DRV_MSG_CODE_PHY_RAW_WRITE 0x000c0000
+/* Param: [0:15] - Address, [30:31] - port */
#define DRV_MSG_CODE_PHY_CORE_READ 0x000d0000
+/* Param: [0:15] - Address, [30:31] - port */
#define DRV_MSG_CODE_PHY_CORE_WRITE 0x000e0000
+/* Param: [0:3] - version, [4:15] - name (null terminated) */
#define DRV_MSG_CODE_SET_VERSION 0x000f0000
+/* Halts the MCP. To resume MCP, user will need to use
+ * MCP_REG_CPU_STATE/MCP_REG_CPU_MODE registers.
+ */
#define DRV_MSG_CODE_MCP_HALT 0x00100000
+/* Host shall provide buffer and size for MFW */
#define DRV_MSG_CODE_PMD_DIAG_DUMP 0x00140000
+/* Host shall provide buffer and size for MFW */
#define DRV_MSG_CODE_PMD_DIAG_EYE 0x00150000
+/* Param: [0:1] - Port, [2:7] - read size, [8:15] - I2C address,
+ * [16:31] - offset
+ */
#define DRV_MSG_CODE_TRANSCEIVER_READ 0x00160000
+/* Param: [0:1] - Port, [2:7] - write size, [8:15] - I2C address,
+ * [16:31] - offset
+ */
#define DRV_MSG_CODE_TRANSCEIVER_WRITE 0x00170000
+/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
+ * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
+ */
#define DRV_MSG_CODE_SET_VMAC 0x00110000
+/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
+ * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
+ */
#define DRV_MSG_CODE_GET_VMAC 0x00120000
#define DRV_MSG_CODE_VMAC_TYPE_MAC 1
#define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
#define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
+/* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
#define DRV_MSG_CODE_GET_STATS 0x00130000
#define DRV_MSG_CODE_STATS_TYPE_LAN 1
#define DRV_MSG_CODE_STATS_TYPE_FCOE 2
#define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
#define DRV_MSG_CODE_STATS_TYPE_RDMA 4
+/* indicate OCBB related information */
#define DRV_MSG_CODE_OCBB_DATA 0x00180000
+
+/* Set function BW, params[15:8] - min, params[7:0] - max */
#define DRV_MSG_CODE_SET_BW 0x00190000
#define BW_MAX_MASK 0x000000ff
#define BW_MAX_SHIFT 0
#define BW_MIN_MASK 0x0000ff00
#define BW_MIN_SHIFT 8
+
+/* When param is set to 1, all parities will be masked(disabled). When params
+ * are set to 0, parities will be unmasked again.
+ */
#define DRV_MSG_CODE_MASK_PARITIES 0x001a0000
+/* param[0] - Simulate fan failure, param[1] - simulate over temp. */
#define DRV_MSG_CODE_INDUCE_FAILURE 0x001b0000
#define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
#define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
+/* Param: [0:15] - gpio number */
#define DRV_MSG_CODE_GPIO_READ 0x001c0000
+/* Param: [0:15] - gpio number, [16:31] - gpio value */
#define DRV_MSG_CODE_GPIO_WRITE 0x001d0000
/* Param: [0:15] - gpio number */
#define DRV_MSG_CODE_GPIO_INFO 0x00270000
#define DRV_MSG_CODE_BIST_TEST 0x001e0000
#define DRV_MSG_CODE_GET_TEMPERATURE 0x001f0000
+/* Set LED mode params :0 operational, 1 LED turn ON, 2 LED turn OFF */
#define DRV_MSG_CODE_SET_LED_MODE 0x00200000
/* drv_data[7:0] - EPOC in seconds, drv_data[15:8] -
* driver version (MAJ MIN BUILD SUB)
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_SHIFT 0
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_MASK 0xF
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_UNKNOWN 0x1
+/* Not Installed*/
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_NOT_LOADED 0x2
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_LOADING 0x3
+/* installed but disabled by user/admin/OS */
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_DISABLED 0x4
+/* installed and active */
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_ACTIVE 0x5
#define DRV_MB_PARAM_OV_MTU_SIZE_SHIFT 0
#define FW_MSG_CODE_NVM_FILE_READ_ONLY 0x00200000
#define FW_MSG_CODE_NVM_UNKNOWN_FILE 0x00300000
#define FW_MSG_CODE_NVM_PUT_FILE_FINISH_OK 0x00400000
+/* MFW reject "mcp reset" command if one of the drivers is up */
#define FW_MSG_CODE_MCP_RESET_REJECT 0x00600000
#define FW_MSG_CODE_PHY_OK 0x00110000
#define FW_MSG_CODE_PHY_ERROR 0x00120000
#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff
+
u32 fw_mb_param;
/* Resource Allocation params - MFW version support*/
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_MASK 0xFFFF0000
#define MCP_EVENT_MASK 0xffff0000
#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000
+/* The union data is used by the driver to pass parameters to the scratchpad. */
+
union drv_union_data union_data;
+
};
/* MFW - DRV MB */
struct public_mfw_mb {
u32 sup_msgs; /* Assigend with MFW_DRV_MSG_MAX */
+/* Incremented by the MFW */
u32 msg[MFW_DRV_MSG_MAX_DWORDS(MFW_DRV_MSG_MAX)];
+/* Incremented by the driver */
u32 ack[MFW_DRV_MSG_MAX_DWORDS(MFW_DRV_MSG_MAX)];
};
git.droids-corp.org / dpdk.git / blobdiff