net/szedata2: add more supported firmwares

[dpdk.git] / drivers / net / szedata2 / szedata2_iobuf.c

diff --git a/drivers/net/szedata2/szedata2_iobuf.c b/drivers/net/szedata2/szedata2_iobuf.c
index 2d25e65..3b9a71f 100644 (file)
--- a/drivers/net/szedata2/szedata2_iobuf.c
+++ b/drivers/net/szedata2/szedata2_iobuf.c
@@ -39,21 +39,41 @@
 
 /*
  * IBUFs and OBUFs can generally be located at different offsets in different
- * firmwares.
- * This part defines base offsets of IBUFs and OBUFs through various firmwares.
- * Currently one firmware type is supported.
- * Type of firmware is set through configuration option
+ * firmwares (modes).
+ * This part defines base offsets of IBUFs and OBUFs for various cards
+ * and firmwares (modes).
+ * Type of firmware (mode) is set through configuration option
  * CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS.
  * Possible values are:
- * 0 - for firmwares:
- *     NIC_100G1_LR4
- *     HANIC_100G1_LR4
- *     HANIC_100G1_SR10
+ * 0 - for cards (modes):
+ *     NFB-100G1 (100G1)
+ *
+ * 1 - for cards (modes):
+ *     NFB-100G2Q (100G1)
+ *
+ * 2 - for cards (modes):
+ *     NFB-40G2 (40G2)
+ *     NFB-100G2C (100G2)
+ *     NFB-100G2Q (40G2)
+ *
+ * 3 - for cards (modes):
+ *     NFB-40G2 (10G8)
+ *     NFB-100G2Q (10G8)
+ *
+ * 4 - for cards (modes):
+ *     NFB-100G1 (10G10)
+ *
+ * 5 - for experimental firmwares and future use
  */
 #if !defined(RTE_LIBRTE_PMD_SZEDATA2_AS)
 #error "RTE_LIBRTE_PMD_SZEDATA2_AS has to be defined"
 #elif RTE_LIBRTE_PMD_SZEDATA2_AS == 0
 
+/*
+ * Cards (modes):
+ *     NFB-100G1 (100G1)
+ */
+
 const uint32_t szedata2_ibuf_base_table[] = {
        0x8000
 };
@@ -61,6 +81,120 @@ const uint32_t szedata2_obuf_base_table[] = {
        0x9000
 };
 
+#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 1
+
+/*
+ * Cards (modes):
+ *     NFB-100G2Q (100G1)
+ */
+
+const uint32_t szedata2_ibuf_base_table[] = {
+       0x8800
+};
+const uint32_t szedata2_obuf_base_table[] = {
+       0x9800
+};
+
+#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 2
+
+/*
+ * Cards (modes):
+ *     NFB-40G2 (40G2)
+ *     NFB-100G2C (100G2)
+ *     NFB-100G2Q (40G2)
+ */
+
+const uint32_t szedata2_ibuf_base_table[] = {
+       0x8000,
+       0x8800
+};
+const uint32_t szedata2_obuf_base_table[] = {
+       0x9000,
+       0x9800
+};
+
+#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 3
+
+/*
+ * Cards (modes):
+ *     NFB-40G2 (10G8)
+ *     NFB-100G2Q (10G8)
+ */
+
+const uint32_t szedata2_ibuf_base_table[] = {
+       0x8000,
+       0x8200,
+       0x8400,
+       0x8600,
+       0x8800,
+       0x8A00,
+       0x8C00,
+       0x8E00
+};
+const uint32_t szedata2_obuf_base_table[] = {
+       0x9000,
+       0x9200,
+       0x9400,
+       0x9600,
+       0x9800,
+       0x9A00,
+       0x9C00,
+       0x9E00
+};
+
+#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 4
+
+/*
+ * Cards (modes):
+ *     NFB-100G1 (10G10)
+ */
+
+const uint32_t szedata2_ibuf_base_table[] = {
+       0x8000,
+       0x8200,
+       0x8400,
+       0x8600,
+       0x8800,
+       0x8A00,
+       0x8C00,
+       0x8E00,
+       0x9000,
+       0x9200
+};
+const uint32_t szedata2_obuf_base_table[] = {
+       0xA000,
+       0xA200,
+       0xA400,
+       0xA600,
+       0xA800,
+       0xAA00,
+       0xAC00,
+       0xAE00,
+       0xB000,
+       0xB200
+};
+
+#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 5
+
+/*
+ * Future use and experimental firmwares.
+ */
+
+const uint32_t szedata2_ibuf_base_table[] = {
+       0x8000,
+       0x8200,
+       0x8400,
+       0x8600,
+       0x8800
+};
+const uint32_t szedata2_obuf_base_table[] = {
+       0x9000,
+       0x9200,
+       0x9400,
+       0x9600,
+       0x9800
+};
+
 #else
 #error "RTE_LIBRTE_PMD_SZEDATA2_AS has wrong value, see comments in config file"
 #endif