remove extra parentheses in return statement
[dpdk.git] / drivers / net / virtio / virtio_ethdev.c
index ae7c281..caa970c 100644 (file)
 #include <stdio.h>
 #include <errno.h>
 #include <unistd.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
-#include <dirent.h>
-#include <fcntl.h>
-#endif
 
 #include <rte_ethdev.h>
 #include <rte_memcpy.h>
@@ -272,9 +268,7 @@ virtio_dev_queue_release(struct virtqueue *vq) {
 
        if (vq) {
                hw = vq->hw;
-               /* Select and deactivate the queue */
-               VIRTIO_WRITE_REG_2(hw, VIRTIO_PCI_QUEUE_SEL, vq->queue_id);
-               VIRTIO_WRITE_REG_4(hw, VIRTIO_PCI_QUEUE_PFN, 0);
+               hw->vtpci_ops->del_queue(hw, vq);
 
                rte_free(vq->sw_ring);
                rte_free(vq);
@@ -295,15 +289,13 @@ int virtio_dev_queue_setup(struct rte_eth_dev *dev,
        struct virtio_hw *hw = dev->data->dev_private;
        struct virtqueue *vq = NULL;
 
-       /* Write the virtqueue index to the Queue Select Field */
-       VIRTIO_WRITE_REG_2(hw, VIRTIO_PCI_QUEUE_SEL, vtpci_queue_idx);
-       PMD_INIT_LOG(DEBUG, "selecting queue: %u", vtpci_queue_idx);
+       PMD_INIT_LOG(DEBUG, "setting up queue: %u", vtpci_queue_idx);
 
        /*
         * Read the virtqueue size from the Queue Size field
         * Always power of 2 and if 0 virtqueue does not exist
         */
-       vq_size = VIRTIO_READ_REG_2(hw, VIRTIO_PCI_QUEUE_NUM);
+       vq_size = hw->vtpci_ops->get_queue_num(hw, vtpci_queue_idx);
        PMD_INIT_LOG(DEBUG, "vq_size: %u nb_desc:%u", vq_size, nb_desc);
        if (vq_size == 0) {
                PMD_INIT_LOG(ERR, "%s: virtqueue does not exist", __func__);
@@ -337,7 +329,7 @@ int virtio_dev_queue_setup(struct rte_eth_dev *dev,
        }
        if (vq == NULL) {
                PMD_INIT_LOG(ERR, "%s: Can not allocate virtqueue", __func__);
-               return (-ENOMEM);
+               return -ENOMEM;
        }
        if (queue_type == VTNET_RQ && vq->sw_ring == NULL) {
                PMD_INIT_LOG(ERR, "%s: Can not allocate RX soft ring",
@@ -436,12 +428,8 @@ int virtio_dev_queue_setup(struct rte_eth_dev *dev,
                memset(vq->virtio_net_hdr_mz->addr, 0, PAGE_SIZE);
        }
 
-       /*
-        * Set guest physical address of the virtqueue
-        * in VIRTIO_PCI_QUEUE_PFN config register of device
-        */
-       VIRTIO_WRITE_REG_4(hw, VIRTIO_PCI_QUEUE_PFN,
-                       mz->phys_addr >> VIRTIO_PCI_QUEUE_ADDR_SHIFT);
+       hw->vtpci_ops->setup_queue(hw, vq);
+
        *pvq = vq;
        return 0;
 }
@@ -788,8 +776,6 @@ virtio_dev_stats_reset(struct rte_eth_dev *dev)
                rxvq->broadcast = 0;
                memset(rxvq->size_bins, 0, sizeof(rxvq->size_bins[0]) * 8);
        }
-
-       dev->data->rx_mbuf_alloc_failed = 0;
 }
 
 static void
@@ -941,19 +927,19 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
        return virtio_send_command(hw->cvq, &ctrl, &len, 1);
 }
 
-static void
+static int
 virtio_negotiate_features(struct virtio_hw *hw)
 {
-       uint32_t host_features;
+       uint64_t host_features;
 
        /* Prepare guest_features: feature that driver wants to support */
        hw->guest_features = VIRTIO_PMD_GUEST_FEATURES;
-       PMD_INIT_LOG(DEBUG, "guest_features before negotiate = %x",
+       PMD_INIT_LOG(DEBUG, "guest_features before negotiate = %" PRIx64,
                hw->guest_features);
 
        /* Read device(host) feature bits */
-       host_features = VIRTIO_READ_REG_4(hw, VIRTIO_PCI_HOST_FEATURES);
-       PMD_INIT_LOG(DEBUG, "host_features before negotiate = %x",
+       host_features = hw->vtpci_ops->get_features(hw);
+       PMD_INIT_LOG(DEBUG, "host_features before negotiate = %" PRIx64,
                host_features);
 
        /*
@@ -961,263 +947,25 @@ virtio_negotiate_features(struct virtio_hw *hw)
         * guest feature bits.
         */
        hw->guest_features = vtpci_negotiate_features(hw, host_features);
-       PMD_INIT_LOG(DEBUG, "features after negotiate = %x",
+       PMD_INIT_LOG(DEBUG, "features after negotiate = %" PRIx64,
                hw->guest_features);
-}
-
-#ifdef RTE_EXEC_ENV_LINUXAPP
-static int
-parse_sysfs_value(const char *filename, unsigned long *val)
-{
-       FILE *f;
-       char buf[BUFSIZ];
-       char *end = NULL;
-
-       f = fopen(filename, "r");
-       if (f == NULL) {
-               PMD_INIT_LOG(ERR, "%s(): cannot open sysfs value %s",
-                            __func__, filename);
-               return -1;
-       }
 
-       if (fgets(buf, sizeof(buf), f) == NULL) {
-               PMD_INIT_LOG(ERR, "%s(): cannot read sysfs value %s",
-                            __func__, filename);
-               fclose(f);
-               return -1;
-       }
-       *val = strtoul(buf, &end, 0);
-       if ((buf[0] == '\0') || (end == NULL) || (*end != '\n')) {
-               PMD_INIT_LOG(ERR, "%s(): cannot parse sysfs value %s",
-                            __func__, filename);
-               fclose(f);
-               return -1;
-       }
-       fclose(f);
-       return 0;
-}
-
-static int get_uio_dev(struct rte_pci_addr *loc, char *buf, unsigned int buflen,
-                       unsigned int *uio_num)
-{
-       struct dirent *e;
-       DIR *dir;
-       char dirname[PATH_MAX];
-
-       /* depending on kernel version, uio can be located in uio/uioX
-        * or uio:uioX */
-       snprintf(dirname, sizeof(dirname),
-                    SYSFS_PCI_DEVICES "/" PCI_PRI_FMT "/uio",
-                    loc->domain, loc->bus, loc->devid, loc->function);
-       dir = opendir(dirname);
-       if (dir == NULL) {
-               /* retry with the parent directory */
-               snprintf(dirname, sizeof(dirname),
-                            SYSFS_PCI_DEVICES "/" PCI_PRI_FMT,
-                            loc->domain, loc->bus, loc->devid, loc->function);
-               dir = opendir(dirname);
-
-               if (dir == NULL) {
-                       PMD_INIT_LOG(ERR, "Cannot opendir %s", dirname);
+       if (hw->modern) {
+               if (!vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) {
+                       PMD_INIT_LOG(ERR,
+                               "VIRTIO_F_VERSION_1 features is not enabled.");
                        return -1;
                }
-       }
-
-       /* take the first file starting with "uio" */
-       while ((e = readdir(dir)) != NULL) {
-               /* format could be uio%d ...*/
-               int shortprefix_len = sizeof("uio") - 1;
-               /* ... or uio:uio%d */
-               int longprefix_len = sizeof("uio:uio") - 1;
-               char *endptr;
-
-               if (strncmp(e->d_name, "uio", 3) != 0)
-                       continue;
-
-               /* first try uio%d */
-               errno = 0;
-               *uio_num = strtoull(e->d_name + shortprefix_len, &endptr, 10);
-               if (errno == 0 && endptr != (e->d_name + shortprefix_len)) {
-                       snprintf(buf, buflen, "%s/uio%u", dirname, *uio_num);
-                       break;
-               }
-
-               /* then try uio:uio%d */
-               errno = 0;
-               *uio_num = strtoull(e->d_name + longprefix_len, &endptr, 10);
-               if (errno == 0 && endptr != (e->d_name + longprefix_len)) {
-                       snprintf(buf, buflen, "%s/uio:uio%u", dirname,
-                                    *uio_num);
-                       break;
-               }
-       }
-       closedir(dir);
-
-       /* No uio resource found */
-       if (e == NULL) {
-               PMD_INIT_LOG(ERR, "Could not find uio resource");
-               return -1;
-       }
-
-       return 0;
-}
-
-static int
-virtio_has_msix(const struct rte_pci_addr *loc)
-{
-       DIR *d;
-       char dirname[PATH_MAX];
-
-       snprintf(dirname, sizeof(dirname),
-                    SYSFS_PCI_DEVICES "/" PCI_PRI_FMT "/msi_irqs",
-                    loc->domain, loc->bus, loc->devid, loc->function);
-
-       d = opendir(dirname);
-       if (d)
-               closedir(d);
-
-       return (d != NULL);
-}
-
-/* Extract I/O port numbers from sysfs */
-static int virtio_resource_init_by_uio(struct rte_pci_device *pci_dev)
-{
-       char dirname[PATH_MAX];
-       char filename[PATH_MAX];
-       unsigned long start, size;
-       unsigned int uio_num;
-
-       if (get_uio_dev(&pci_dev->addr, dirname, sizeof(dirname), &uio_num) < 0)
-               return -1;
-
-       /* get portio size */
-       snprintf(filename, sizeof(filename),
-                    "%s/portio/port0/size", dirname);
-       if (parse_sysfs_value(filename, &size) < 0) {
-               PMD_INIT_LOG(ERR, "%s(): cannot parse size",
-                            __func__);
-               return -1;
-       }
-
-       /* get portio start */
-       snprintf(filename, sizeof(filename),
-                "%s/portio/port0/start", dirname);
-       if (parse_sysfs_value(filename, &start) < 0) {
-               PMD_INIT_LOG(ERR, "%s(): cannot parse portio start",
-                            __func__);
-               return -1;
-       }
-       pci_dev->mem_resource[0].addr = (void *)(uintptr_t)start;
-       pci_dev->mem_resource[0].len =  (uint64_t)size;
-       PMD_INIT_LOG(DEBUG,
-                    "PCI Port IO found start=0x%lx with size=0x%lx",
-                    start, size);
-
-       /* save fd */
-       memset(dirname, 0, sizeof(dirname));
-       snprintf(dirname, sizeof(dirname), "/dev/uio%u", uio_num);
-       pci_dev->intr_handle.fd = open(dirname, O_RDWR);
-       if (pci_dev->intr_handle.fd < 0) {
-               PMD_INIT_LOG(ERR, "Cannot open %s: %s\n",
-                       dirname, strerror(errno));
-               return -1;
-       }
-
-       pci_dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
-       pci_dev->driver->drv_flags |= RTE_PCI_DRV_INTR_LSC;
-
-       return 0;
-}
-
-/* Extract port I/O numbers from proc/ioports */
-static int virtio_resource_init_by_ioports(struct rte_pci_device *pci_dev)
-{
-       uint16_t start, end;
-       int size;
-       FILE *fp;
-       char *line = NULL;
-       char pci_id[16];
-       int found = 0;
-       size_t linesz;
-
-       snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
-                pci_dev->addr.domain,
-                pci_dev->addr.bus,
-                pci_dev->addr.devid,
-                pci_dev->addr.function);
-
-       fp = fopen("/proc/ioports", "r");
-       if (fp == NULL) {
-               PMD_INIT_LOG(ERR, "%s(): can't open ioports", __func__);
-               return -1;
-       }
-
-       while (getdelim(&line, &linesz, '\n', fp) > 0) {
-               char *ptr = line;
-               char *left;
-               int n;
-
-               n = strcspn(ptr, ":");
-               ptr[n] = 0;
-               left = &ptr[n+1];
-
-               while (*left && isspace(*left))
-                       left++;
-
-               if (!strncmp(left, pci_id, strlen(pci_id))) {
-                       found = 1;
-
-                       while (*ptr && isspace(*ptr))
-                               ptr++;
-
-                       sscanf(ptr, "%04hx-%04hx", &start, &end);
-                       size = end - start + 1;
-
-                       break;
+               vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_FEATURES_OK);
+               if (!(vtpci_get_status(hw) & VIRTIO_CONFIG_STATUS_FEATURES_OK)) {
+                       PMD_INIT_LOG(ERR,
+                               "failed to set FEATURES_OK status!");
+                       return -1;
                }
        }
 
-       free(line);
-       fclose(fp);
-
-       if (!found)
-               return -1;
-
-       pci_dev->mem_resource[0].addr = (void *)(uintptr_t)(uint32_t)start;
-       pci_dev->mem_resource[0].len =  (uint64_t)size;
-       PMD_INIT_LOG(DEBUG,
-               "PCI Port IO found start=0x%x with size=0x%x",
-               start, size);
-
-       /* can't support lsc interrupt without uio */
-       pci_dev->driver->drv_flags &= ~RTE_PCI_DRV_INTR_LSC;
-
-       return 0;
-}
-
-/* Extract I/O port numbers from sysfs */
-static int virtio_resource_init(struct rte_pci_device *pci_dev)
-{
-       if (virtio_resource_init_by_uio(pci_dev) == 0)
-               return 0;
-       else
-               return virtio_resource_init_by_ioports(pci_dev);
-}
-
-#else
-static int
-virtio_has_msix(const struct rte_pci_addr *loc __rte_unused)
-{
-       /* nic_uio does not enable interrupts, return 0 (false). */
-       return 0;
-}
-
-static int virtio_resource_init(struct rte_pci_device *pci_dev __rte_unused)
-{
-       /* no setup required */
        return 0;
 }
-#endif
 
 /*
  * Process Virtio Config changed interrupt and call the callback
@@ -1289,12 +1037,9 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
 
        pci_dev = eth_dev->pci_dev;
 
-       if (virtio_resource_init(pci_dev) < 0)
+       if (vtpci_init(pci_dev, hw) < 0)
                return -1;
 
-       hw->use_msix = virtio_has_msix(&pci_dev->addr);
-       hw->io_base = (uint32_t)(uintptr_t)pci_dev->mem_resource[0].addr;
-
        /* Reset the device although not necessary at startup */
        vtpci_reset(hw);
 
@@ -1303,7 +1048,8 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
 
        /* Tell the host we've known how to drive the device. */
        vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_DRIVER);
-       virtio_negotiate_features(hw);
+       if (virtio_negotiate_features(hw) < 0)
+               return -1;
 
        /* If host does not support status then disable LSC */
        if (!vtpci_with_feature(hw, VIRTIO_NET_F_STATUS))
@@ -1314,7 +1060,8 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
        rx_func_get(eth_dev);
 
        /* Setting up rx_header size for the device */
-       if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF))
+       if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF) ||
+           vtpci_with_feature(hw, VIRTIO_F_VERSION_1))
                hw->vtnet_hdr_size = sizeof(struct virtio_net_hdr_mrg_rxbuf);
        else
                hw->vtnet_hdr_size = sizeof(struct virtio_net_hdr);
@@ -1430,6 +1177,7 @@ eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev)
                rte_intr_callback_unregister(&pci_dev->intr_handle,
                                                virtio_interrupt_handler,
                                                eth_dev);
+       rte_eal_pci_unmap_device(pci_dev);
 
        PMD_INIT_LOG(DEBUG, "dev_uninit completed");
 
@@ -1481,7 +1229,7 @@ virtio_dev_configure(struct rte_eth_dev *dev)
 
        if (rxmode->hw_ip_checksum) {
                PMD_DRV_LOG(ERR, "HW IP checksum not supported");
-               return (-EINVAL);
+               return -EINVAL;
        }
 
        hw->vlan_strip = rxmode->hw_vlan_strip;