net: add rte prefix to ether structures
[dpdk.git] / examples / ip_fragmentation / main.c
index 5aefe09..a9efb4b 100644 (file)
@@ -1,34 +1,5 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
  */
 
 #include <stdio.h>
 #define        IPV4_MTU_DEFAULT        ETHER_MTU
 #define        IPV6_MTU_DEFAULT        ETHER_MTU
 
+/*
+ * The overhead from max frame size to MTU.
+ * We have to consider the max possible overhead.
+ */
+#define MTU_OVERHEAD   \
+       (ETHER_HDR_LEN + ETHER_CRC_LEN + 2 * sizeof(struct rte_vlan_hdr))
+
 /*
  * Default payload in bytes for the IPv6 packet.
  */
 /*
  * Configurable number of RX/TX ring descriptors
  */
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
 
 /* ethernet addresses of ports */
-static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 
 #ifndef IPv4_BYTES
 #define IPv4_BYTES_FMT "%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8
@@ -169,14 +147,14 @@ static struct rte_eth_conf port_conf = {
        .rxmode = {
                .max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
                .split_hdr_size = 0,
-               .header_split   = 0, /**< Header Split disabled */
-               .hw_ip_checksum = 1, /**< IP checksum offload enabled */
-               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
-               .jumbo_frame    = 1, /**< Jumbo Frame Support enabled */
-               .hw_strip_crc   = 1, /**< CRC stripped by hardware */
+               .offloads = (DEV_RX_OFFLOAD_CHECKSUM |
+                            DEV_RX_OFFLOAD_SCATTER |
+                            DEV_RX_OFFLOAD_JUMBO_FRAME),
        },
        .txmode = {
                .mq_mode = ETH_MQ_TX_NONE,
+               .offloads = (DEV_TX_OFFLOAD_IPV4_CKSUM |
+                            DEV_TX_OFFLOAD_MULTI_SEGS),
        },
 };
 
@@ -274,7 +252,7 @@ l3fwd_simple_forward(struct rte_mbuf *m, struct lcore_queue_conf *qconf,
        port_out = port_in;
 
        /* Remove the Ethernet header and trailer from the input packet */
-       rte_pktmbuf_adj(m, (uint16_t)sizeof(struct ether_hdr));
+       rte_pktmbuf_adj(m, (uint16_t)sizeof(struct rte_ether_hdr));
 
        /* Build transmission burst */
        len = qconf->tx_mbufs[port_out].len;
@@ -362,13 +340,14 @@ l3fwd_simple_forward(struct rte_mbuf *m, struct lcore_queue_conf *qconf,
                void *d_addr_bytes;
 
                m = qconf->tx_mbufs[port_out].m_table[i];
-               struct ether_hdr *eth_hdr = (struct ether_hdr *)
-                       rte_pktmbuf_prepend(m, (uint16_t)sizeof(struct ether_hdr));
+               struct rte_ether_hdr *eth_hdr = (struct rte_ether_hdr *)
+                       rte_pktmbuf_prepend(m,
+                               (uint16_t)sizeof(struct rte_ether_hdr));
                if (eth_hdr == NULL) {
                        rte_panic("No headroom in mbuf.\n");
                }
 
-               m->l2_len = sizeof(struct ether_hdr);
+               m->l2_len = sizeof(struct rte_ether_hdr);
 
                /* 02:00:00:00:00:xx */
                d_addr_bytes = &eth_hdr->d_addr.addr_bytes[0];
@@ -590,7 +569,7 @@ parse_args(int argc, char **argv)
 }
 
 static void
-print_ethaddr(const char *name, struct ether_addr *eth_addr)
+print_ethaddr(const char *name, struct rte_ether_addr *eth_addr)
 {
        char buf[ETHER_ADDR_FMT_SIZE];
        ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
@@ -599,7 +578,7 @@ print_ethaddr(const char *name, struct ether_addr *eth_addr)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
@@ -611,7 +590,7 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
        fflush(stdout);
        for (count = 0; count <= MAX_CHECK_TIME; count++) {
                all_ports_up = 1;
-               for (portid = 0; portid < port_num; portid++) {
+               RTE_ETH_FOREACH_DEV(portid) {
                        if ((port_mask & (1 << portid)) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
@@ -691,11 +670,11 @@ check_ptype(int portid)
 static inline void
 parse_ptype(struct rte_mbuf *m)
 {
-       struct ether_hdr *eth_hdr;
+       struct rte_ether_hdr *eth_hdr;
        uint32_t packet_type = RTE_PTYPE_UNKNOWN;
        uint16_t ether_type;
 
-       eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+       eth_hdr = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
        ether_type = eth_hdr->ether_type;
        if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv4))
                packet_type |= RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
@@ -871,7 +850,7 @@ main(int argc, char **argv)
        struct rte_eth_txconf *txconf;
        struct rx_queue *rxq;
        int socket, ret;
-       unsigned nb_ports;
+       uint16_t nb_ports;
        uint16_t queueid = 0;
        unsigned lcore_id = 0, rx_lcore_id = 0;
        uint32_t n_tx_queue, nb_lcores;
@@ -889,7 +868,7 @@ main(int argc, char **argv)
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Invalid arguments");
 
-       nb_ports = rte_eth_dev_count();
+       nb_ports = rte_eth_dev_count_avail();
        if (nb_ports == 0)
                rte_exit(EXIT_FAILURE, "No ports found!\n");
 
@@ -904,7 +883,10 @@ main(int argc, char **argv)
                rte_exit(EXIT_FAILURE, "Non-existent ports in portmask!\n");
 
        /* initialize all ports */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
+               struct rte_eth_conf local_port_conf = port_conf;
+               struct rte_eth_rxconf rxq_conf;
+
                /* skip ports that are not enabled */
                if ((enabled_port_mask & (1 << portid)) == 0) {
                        printf("Skipping disabled port %d\n", portid);
@@ -915,8 +897,9 @@ main(int argc, char **argv)
 
                /* limit the frame size to the maximum supported by NIC */
                rte_eth_dev_info_get(portid, &dev_info);
-               port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
-                   dev_info.max_rx_pktlen, port_conf.rxmode.max_rx_pkt_len);
+               local_port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
+                   dev_info.max_rx_pktlen,
+                   local_port_conf.rxmode.max_rx_pkt_len);
 
                /* get the lcore_id for this port */
                while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
@@ -949,8 +932,11 @@ main(int argc, char **argv)
                n_tx_queue = nb_lcores;
                if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
                        n_tx_queue = MAX_TX_QUEUE_PER_PORT;
+               if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+                       local_port_conf.txmode.offloads |=
+                               DEV_TX_OFFLOAD_MBUF_FAST_FREE;
                ret = rte_eth_dev_configure(portid, 1, (uint16_t)n_tx_queue,
-                                           &port_conf);
+                                           &local_port_conf);
                if (ret < 0) {
                        printf("\n");
                        rte_exit(EXIT_FAILURE, "Cannot configure device: "
@@ -958,6 +944,16 @@ main(int argc, char **argv)
                                ret, portid);
                }
 
+               /* set the mtu to the maximum received packet size */
+               ret = rte_eth_dev_set_mtu(portid,
+                       local_port_conf.rxmode.max_rx_pkt_len - MTU_OVERHEAD);
+               if (ret < 0) {
+                       printf("\n");
+                       rte_exit(EXIT_FAILURE, "Set MTU failed: "
+                               "err=%d, port=%d\n",
+                       ret, portid);
+               }
+
                ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
                                            &nb_txd);
                if (ret < 0) {
@@ -967,8 +963,10 @@ main(int argc, char **argv)
                }
 
                /* init one RX queue */
+               rxq_conf = dev_info.default_rxconf;
+               rxq_conf.offloads = local_port_conf.rxmode.offloads;
                ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
-                                            socket, NULL,
+                                            socket, &rxq_conf,
                                             socket_direct_pool[socket]);
                if (ret < 0) {
                        printf("\n");
@@ -992,7 +990,7 @@ main(int argc, char **argv)
                        fflush(stdout);
 
                        txconf = &dev_info.default_txconf;
-                       txconf->txq_flags = 0;
+                       txconf->offloads = local_port_conf.txmode.offloads;
                        ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
                                                     socket, txconf);
                        if (ret < 0) {
@@ -1012,7 +1010,7 @@ main(int argc, char **argv)
        printf("\n");
 
        /* start ports */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                if ((enabled_port_mask & (1 << portid)) == 0) {
                        continue;
                }
@@ -1034,7 +1032,7 @@ main(int argc, char **argv)
        if (init_routing_table() < 0)
                rte_exit(EXIT_FAILURE, "Cannot init routing table\n");
 
-       check_all_ports_link_status(nb_ports, enabled_port_mask);
+       check_all_ports_link_status(enabled_port_mask);
 
        /* launch per-lcore init on every lcore */
        rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);