#define IPV4_MTU_DEFAULT ETHER_MTU
#define IPV6_MTU_DEFAULT ETHER_MTU
+/*
+ * The overhead from max frame size to MTU.
+ * We have to consider the max possible overhead.
+ */
+#define MTU_OVERHEAD \
+ (ETHER_HDR_LEN + ETHER_CRC_LEN + 2 * sizeof(struct rte_vlan_hdr))
+
/*
* Default payload in bytes for the IPv6 packet.
*/
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
/* ethernet addresses of ports */
-static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
#ifndef IPv4_BYTES
#define IPv4_BYTES_FMT "%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8
.rxmode = {
.max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
.split_hdr_size = 0,
- .ignore_offload_bitfield = 1,
.offloads = (DEV_RX_OFFLOAD_CHECKSUM |
- DEV_RX_OFFLOAD_JUMBO_FRAME |
- DEV_RX_OFFLOAD_CRC_STRIP),
+ DEV_RX_OFFLOAD_SCATTER |
+ DEV_RX_OFFLOAD_JUMBO_FRAME),
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
port_out = port_in;
/* Remove the Ethernet header and trailer from the input packet */
- rte_pktmbuf_adj(m, (uint16_t)sizeof(struct ether_hdr));
+ rte_pktmbuf_adj(m, (uint16_t)sizeof(struct rte_ether_hdr));
/* Build transmission burst */
len = qconf->tx_mbufs[port_out].len;
void *d_addr_bytes;
m = qconf->tx_mbufs[port_out].m_table[i];
- struct ether_hdr *eth_hdr = (struct ether_hdr *)
- rte_pktmbuf_prepend(m, (uint16_t)sizeof(struct ether_hdr));
+ struct rte_ether_hdr *eth_hdr = (struct rte_ether_hdr *)
+ rte_pktmbuf_prepend(m,
+ (uint16_t)sizeof(struct rte_ether_hdr));
if (eth_hdr == NULL) {
rte_panic("No headroom in mbuf.\n");
}
- m->l2_len = sizeof(struct ether_hdr);
+ m->l2_len = sizeof(struct rte_ether_hdr);
/* 02:00:00:00:00:xx */
d_addr_bytes = ð_hdr->d_addr.addr_bytes[0];
}
static void
-print_ethaddr(const char *name, struct ether_addr *eth_addr)
+print_ethaddr(const char *name, struct rte_ether_addr *eth_addr)
{
char buf[ETHER_ADDR_FMT_SIZE];
ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
- for (portid = 0; portid < port_num; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
static inline void
parse_ptype(struct rte_mbuf *m)
{
- struct ether_hdr *eth_hdr;
+ struct rte_ether_hdr *eth_hdr;
uint32_t packet_type = RTE_PTYPE_UNKNOWN;
uint16_t ether_type;
- eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ eth_hdr = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
ether_type = eth_hdr->ether_type;
if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv4))
packet_type |= RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
struct rte_eth_txconf *txconf;
struct rx_queue *rxq;
int socket, ret;
- unsigned nb_ports;
+ uint16_t nb_ports;
uint16_t queueid = 0;
unsigned lcore_id = 0, rx_lcore_id = 0;
uint32_t n_tx_queue, nb_lcores;
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid arguments");
- nb_ports = rte_eth_dev_count();
+ nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No ports found!\n");
rte_exit(EXIT_FAILURE, "Non-existent ports in portmask!\n");
/* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
struct rte_eth_conf local_port_conf = port_conf;
struct rte_eth_rxconf rxq_conf;
ret, portid);
}
+ /* set the mtu to the maximum received packet size */
+ ret = rte_eth_dev_set_mtu(portid,
+ local_port_conf.rxmode.max_rx_pkt_len - MTU_OVERHEAD);
+ if (ret < 0) {
+ printf("\n");
+ rte_exit(EXIT_FAILURE, "Set MTU failed: "
+ "err=%d, port=%d\n",
+ ret, portid);
+ }
+
ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
&nb_txd);
if (ret < 0) {
fflush(stdout);
txconf = &dev_info.default_txconf;
- txconf->txq_flags = ETH_TXQ_FLAGS_IGNORE;
txconf->offloads = local_port_conf.txmode.offloads;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
socket, txconf);
printf("\n");
/* start ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
if (init_routing_table() < 0)
rte_exit(EXIT_FAILURE, "Cannot init routing table\n");
- check_all_ports_link_status(nb_ports, enabled_port_mask);
+ check_all_ports_link_status(enabled_port_mask);
/* launch per-lcore init on every lcore */
rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);