* Copyright(c) 2016 Intel Corporation
*/
+#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
+#include <signal.h>
#include <getopt.h>
#include <rte_common.h>
+#include <rte_bitmap.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_eal.h>
#include <rte_jhash.h>
#include <rte_cryptodev.h>
#include <rte_security.h>
+#include <rte_eventdev.h>
#include <rte_ip.h>
#include <rte_ip_frag.h>
+#include "event_helper.h"
#include "ipsec.h"
#include "parser.h"
#include "sad.h"
+volatile bool force_quit;
+
#define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
#define MAX_JUMBO_PKT_LEN 9600
#define CMD_LINE_OPT_CONFIG "config"
#define CMD_LINE_OPT_SINGLE_SA "single-sa"
#define CMD_LINE_OPT_CRYPTODEV_MASK "cryptodev_mask"
+#define CMD_LINE_OPT_TRANSFER_MODE "transfer-mode"
+#define CMD_LINE_OPT_SCHEDULE_TYPE "event-schedule-type"
#define CMD_LINE_OPT_RX_OFFLOAD "rxoffload"
#define CMD_LINE_OPT_TX_OFFLOAD "txoffload"
#define CMD_LINE_OPT_REASSEMBLE "reassemble"
#define CMD_LINE_OPT_MTU "mtu"
#define CMD_LINE_OPT_FRAG_TTL "frag-ttl"
+#define CMD_LINE_ARG_EVENT "event"
+#define CMD_LINE_ARG_POLL "poll"
+#define CMD_LINE_ARG_ORDERED "ordered"
+#define CMD_LINE_ARG_ATOMIC "atomic"
+#define CMD_LINE_ARG_PARALLEL "parallel"
+
enum {
/* long options mapped to a short option */
CMD_LINE_OPT_CONFIG_NUM,
CMD_LINE_OPT_SINGLE_SA_NUM,
CMD_LINE_OPT_CRYPTODEV_MASK_NUM,
+ CMD_LINE_OPT_TRANSFER_MODE_NUM,
+ CMD_LINE_OPT_SCHEDULE_TYPE_NUM,
CMD_LINE_OPT_RX_OFFLOAD_NUM,
CMD_LINE_OPT_TX_OFFLOAD_NUM,
CMD_LINE_OPT_REASSEMBLE_NUM,
{CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
{CMD_LINE_OPT_SINGLE_SA, 1, 0, CMD_LINE_OPT_SINGLE_SA_NUM},
{CMD_LINE_OPT_CRYPTODEV_MASK, 1, 0, CMD_LINE_OPT_CRYPTODEV_MASK_NUM},
+ {CMD_LINE_OPT_TRANSFER_MODE, 1, 0, CMD_LINE_OPT_TRANSFER_MODE_NUM},
+ {CMD_LINE_OPT_SCHEDULE_TYPE, 1, 0, CMD_LINE_OPT_SCHEDULE_TYPE_NUM},
{CMD_LINE_OPT_RX_OFFLOAD, 1, 0, CMD_LINE_OPT_RX_OFFLOAD_NUM},
{CMD_LINE_OPT_TX_OFFLOAD, 1, 0, CMD_LINE_OPT_TX_OFFLOAD_NUM},
{CMD_LINE_OPT_REASSEMBLE, 1, 0, CMD_LINE_OPT_REASSEMBLE_NUM},
}
static int32_t
-check_params(void)
+check_poll_mode_params(struct eh_conf *eh_conf)
{
uint8_t lcore;
uint16_t portid;
uint16_t i;
int32_t socket_id;
+ if (!eh_conf)
+ return -EINVAL;
+
+ if (eh_conf->mode != EH_PKT_TRANSFER_MODE_POLL)
+ return 0;
+
if (lcore_params == NULL) {
printf("Error: No port/queue/core mappings\n");
return -1;
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--single-sa SAIDX]"
" [--cryptodev_mask MASK]"
+ " [--transfer-mode MODE]"
+ " [--event-schedule-type TYPE]"
" [--" CMD_LINE_OPT_RX_OFFLOAD " RX_OFFLOAD_MASK]"
" [--" CMD_LINE_OPT_TX_OFFLOAD " TX_OFFLOAD_MASK]"
" [--" CMD_LINE_OPT_REASSEMBLE " REASSEMBLE_TABLE_SIZE]"
" -c specifies inbound SAD cache size,\n"
" zero value disables the cache (default value: 128)\n"
" -f CONFIG_FILE: Configuration file\n"
- " --config (port,queue,lcore): Rx queue configuration\n"
+ " --config (port,queue,lcore): Rx queue configuration. In poll\n"
+ " mode determines which queues from\n"
+ " which ports are mapped to which cores.\n"
+ " In event mode this option is not used\n"
+ " as packets are dynamically scheduled\n"
+ " to cores by HW.\n"
" --single-sa SAIDX: Use single SA index for outbound traffic,\n"
" bypassing the SP\n"
" --cryptodev_mask MASK: Hexadecimal bitmask of the crypto\n"
" devices to configure\n"
+ " --transfer-mode MODE\n"
+ " \"poll\" : Packet transfer via polling (default)\n"
+ " \"event\" : Packet transfer via event device\n"
+ " --event-schedule-type TYPE queue schedule type, used only when\n"
+ " transfer mode is set to event\n"
+ " \"ordered\" : Ordered (default)\n"
+ " \"atomic\" : Atomic\n"
+ " \"parallel\" : Parallel\n"
" --" CMD_LINE_OPT_RX_OFFLOAD
": bitmask of the RX HW offload capabilities to enable/use\n"
" (DEV_RX_OFFLOAD_*)\n"
printf("Frag TTL: %" PRIu64 " ns\n", frag_ttl_ns);
}
+static int
+parse_transfer_mode(struct eh_conf *conf, const char *optarg)
+{
+ if (!strcmp(CMD_LINE_ARG_POLL, optarg))
+ conf->mode = EH_PKT_TRANSFER_MODE_POLL;
+ else if (!strcmp(CMD_LINE_ARG_EVENT, optarg))
+ conf->mode = EH_PKT_TRANSFER_MODE_EVENT;
+ else {
+ printf("Unsupported packet transfer mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+parse_schedule_type(struct eh_conf *conf, const char *optarg)
+{
+ struct eventmode_conf *em_conf = NULL;
+
+ /* Get eventmode conf */
+ em_conf = conf->mode_params;
+
+ if (!strcmp(CMD_LINE_ARG_ORDERED, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
+ else if (!strcmp(CMD_LINE_ARG_ATOMIC, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ATOMIC;
+ else if (!strcmp(CMD_LINE_ARG_PARALLEL, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_PARALLEL;
+ else {
+ printf("Unsupported queue schedule type\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int32_t
-parse_args(int32_t argc, char **argv)
+parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
{
int opt;
int64_t ret;
/* else */
single_sa = 1;
single_sa_idx = ret;
+ eh_conf->ipsec_mode = EH_IPSEC_MODE_TYPE_DRIVER;
printf("Configured with single SA index %u\n",
single_sa_idx);
break;
/* else */
enabled_cryptodev_mask = ret;
break;
+
+ case CMD_LINE_OPT_TRANSFER_MODE_NUM:
+ ret = parse_transfer_mode(eh_conf, optarg);
+ if (ret < 0) {
+ printf("Invalid packet transfer mode\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+
+ case CMD_LINE_OPT_SCHEDULE_TYPE_NUM:
+ ret = parse_schedule_type(eh_conf, optarg);
+ if (ret < 0) {
+ printf("Invalid queue schedule type\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+
case CMD_LINE_OPT_RX_OFFLOAD_NUM:
ret = parse_mask(optarg, &dev_rx_offload);
if (ret != 0) {
port_id);
}
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ force_quit = true;
+ }
+}
+
+static void
+ev_mode_sess_verify(struct ipsec_sa *sa, int nb_sa)
+{
+ struct rte_ipsec_session *ips;
+ int32_t i;
+
+ if (!sa || !nb_sa)
+ return;
+
+ for (i = 0; i < nb_sa; i++) {
+ ips = ipsec_get_primary_session(&sa[i]);
+ if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
+ rte_exit(EXIT_FAILURE, "Event mode supports only "
+ "inline protocol sessions\n");
+ }
+
+}
+
+static int32_t
+check_event_mode_params(struct eh_conf *eh_conf)
+{
+ struct eventmode_conf *em_conf = NULL;
+ struct lcore_params *params;
+ uint16_t portid;
+
+ if (!eh_conf || !eh_conf->mode_params)
+ return -EINVAL;
+
+ /* Get eventmode conf */
+ em_conf = eh_conf->mode_params;
+
+ if (eh_conf->mode == EH_PKT_TRANSFER_MODE_POLL &&
+ em_conf->ext_params.sched_type != SCHED_TYPE_NOT_SET) {
+ printf("error: option --event-schedule-type applies only to "
+ "event mode\n");
+ return -EINVAL;
+ }
+
+ if (eh_conf->mode != EH_PKT_TRANSFER_MODE_EVENT)
+ return 0;
+
+ /* Set schedule type to ORDERED if it wasn't explicitly set by user */
+ if (em_conf->ext_params.sched_type == SCHED_TYPE_NOT_SET)
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
+
+ /*
+ * Event mode currently supports only inline protocol sessions.
+ * If there are other types of sessions configured then exit with
+ * error.
+ */
+ ev_mode_sess_verify(sa_in, nb_sa_in);
+ ev_mode_sess_verify(sa_out, nb_sa_out);
+
+
+ /* Option --config does not apply to event mode */
+ if (nb_lcore_params > 0) {
+ printf("error: option --config applies only to poll mode\n");
+ return -EINVAL;
+ }
+
+ /*
+ * In order to use the same port_init routine for both poll and event
+ * modes initialize lcore_params with one queue for each eth port
+ */
+ lcore_params = lcore_params_array;
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ params = &lcore_params[nb_lcore_params++];
+ params->port_id = portid;
+ params->queue_id = 0;
+ params->lcore_id = rte_get_next_lcore(0, 0, 1);
+ }
+
+ return 0;
+}
+
+static void
+inline_sessions_free(struct sa_ctx *sa_ctx)
+{
+ struct rte_ipsec_session *ips;
+ struct ipsec_sa *sa;
+ int32_t ret;
+ uint32_t i;
+
+ if (!sa_ctx)
+ return;
+
+ for (i = 0; i < sa_ctx->nb_sa; i++) {
+
+ sa = &sa_ctx->sa[i];
+ if (!sa->spi)
+ continue;
+
+ ips = ipsec_get_primary_session(sa);
+ if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL &&
+ ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO)
+ continue;
+
+ if (!rte_eth_dev_is_valid_port(sa->portid))
+ continue;
+
+ ret = rte_security_session_destroy(
+ rte_eth_dev_get_sec_ctx(sa->portid),
+ ips->security.ses);
+ if (ret)
+ RTE_LOG(ERR, IPSEC, "Failed to destroy security "
+ "session type %d, spi %d\n",
+ ips->type, sa->spi);
+ }
+}
+
int32_t
main(int32_t argc, char **argv)
{
int32_t ret;
uint32_t lcore_id;
+ uint32_t cdev_id;
uint32_t i;
uint8_t socket_id;
uint16_t portid;
uint64_t req_rx_offloads[RTE_MAX_ETHPORTS];
uint64_t req_tx_offloads[RTE_MAX_ETHPORTS];
+ struct eh_conf *eh_conf = NULL;
size_t sess_sz;
/* init EAL */
argc -= ret;
argv += ret;
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* initialize event helper configuration */
+ eh_conf = eh_conf_init();
+ if (eh_conf == NULL)
+ rte_exit(EXIT_FAILURE, "Failed to init event helper config");
+
/* parse application arguments (after the EAL ones) */
- ret = parse_args(argc, argv);
+ ret = parse_args(argc, argv, eh_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid parameters\n");
rte_exit(EXIT_FAILURE, "Invalid unprotected portmask 0x%x\n",
unprotected_port_mask);
- if (check_params() < 0)
- rte_exit(EXIT_FAILURE, "check_params failed\n");
+ if (check_poll_mode_params(eh_conf) < 0)
+ rte_exit(EXIT_FAILURE, "check_poll_mode_params failed\n");
+
+ if (check_event_mode_params(eh_conf) < 0)
+ rte_exit(EXIT_FAILURE, "check_event_mode_params failed\n");
ret = init_lcore_rx_queues();
if (ret < 0)
cryptodevs_init();
+ /*
+ * Set the enabled port mask in helper config for use by helper
+ * sub-system. This will be used while initializing devices using
+ * helper sub-system.
+ */
+ eh_conf->eth_portmask = enabled_port_mask;
+
+ /* Initialize eventmode components */
+ ret = eh_devs_init(eh_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "eh_devs_init failed, err=%d\n", ret);
+
/* start ports */
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
return -1;
}
+ /* Uninitialize eventmode components */
+ ret = eh_devs_uninit(eh_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "eh_devs_uninit failed, err=%d\n", ret);
+
+ /* Free eventmode configuration memory */
+ eh_conf_uninit(eh_conf);
+
+ /* Destroy inline inbound and outbound sessions */
+ for (i = 0; i < NB_SOCKETS && i < rte_socket_count(); i++) {
+ socket_id = rte_socket_id_by_idx(i);
+ inline_sessions_free(socket_ctx[socket_id].sa_in);
+ inline_sessions_free(socket_ctx[socket_id].sa_out);
+ }
+
+ for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
+ printf("Closing cryptodev %d...", cdev_id);
+ rte_cryptodev_stop(cdev_id);
+ rte_cryptodev_close(cdev_id);
+ printf(" Done\n");
+ }
+
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ printf("Closing port %d...", portid);
+ if (flow_info_tbl[portid].rx_def_flow) {
+ struct rte_flow_error err;
+
+ ret = rte_flow_destroy(portid,
+ flow_info_tbl[portid].rx_def_flow, &err);
+ if (ret)
+ RTE_LOG(ERR, IPSEC, "Failed to destroy flow "
+ " for port %u, err msg: %s\n", portid,
+ err.message);
+ }
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+ printf("Bye...\n");
+
return 0;
}
git.droids-corp.org / dpdk.git / blobdiff