/*-
* BSD LICENSE
- *
- * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
-#include <rte_tailq.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_eal.h>
-#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_malloc.h>
#include <rte_fbk_hash.h>
#include <rte_ip.h>
-#include "main.h"
-
#define RTE_LOGTYPE_IPv4_MULTICAST RTE_LOGTYPE_USER1
#define MAX_PORTS 16
#define MCAST_CLONE_PORTS 2
#define MCAST_CLONE_SEGS 2
-#define PKT_MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define PKT_MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
#define NB_PKT_MBUF 8192
-#define HDR_MBUF_SIZE (sizeof(struct rte_mbuf) + 2 * RTE_PKTMBUF_HEADROOM)
+#define HDR_MBUF_DATA_SIZE (2 * RTE_PKTMBUF_HEADROOM)
#define NB_HDR_MBUF (NB_PKT_MBUF * MAX_PORTS)
-#define CLONE_MBUF_SIZE (sizeof(struct rte_mbuf))
#define NB_CLONE_MBUF (NB_PKT_MBUF * MCAST_CLONE_PORTS * MCAST_CLONE_SEGS * 2)
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
-
#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
/* mask of enabled ports */
static uint32_t enabled_port_mask = 0;
-static uint8_t nb_ports = 0;
+static uint16_t nb_ports;
static int rx_queue_per_lcore = 1;
} __rte_cache_aligned;
static struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
-static const struct rte_eth_conf port_conf = {
+static struct rte_eth_conf port_conf = {
.rxmode = {
.max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
.split_hdr_size = 0,
.hw_ip_checksum = 0, /**< IP checksum offload disabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 1, /**< Jumbo Frame Support enabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
},
};
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
-};
-
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
static struct rte_mempool *packet_pool, *header_pool, *clone_pool;
/* Send burst of packets on an output interface */
static void
-send_burst(struct lcore_queue_conf *qconf, uint8_t port)
+send_burst(struct lcore_queue_conf *qconf, uint16_t port)
{
struct rte_mbuf **m_table;
uint16_t n, queueid;
for (n = 0; v != 0; v &= v - 1, n++)
;
- return (n);
+ return n;
}
/**
/* Create new mbuf for the header. */
if (unlikely ((hdr = rte_pktmbuf_alloc(header_pool)) == NULL))
- return (NULL);
+ return NULL;
/* If requested, then make a new clone packet. */
if (use_clone != 0 &&
unlikely ((pkt = rte_pktmbuf_clone(pkt, clone_pool)) == NULL)) {
rte_pktmbuf_free(hdr);
- return (NULL);
+ return NULL;
}
/* prepend new header */
- hdr->pkt.next = pkt;
+ hdr->next = pkt;
/* update header's fields */
- hdr->pkt.pkt_len = (uint16_t)(hdr->pkt.data_len + pkt->pkt.pkt_len);
- hdr->pkt.nb_segs = (uint8_t)(pkt->pkt.nb_segs + 1);
+ hdr->pkt_len = (uint16_t)(hdr->data_len + pkt->pkt_len);
+ hdr->nb_segs = pkt->nb_segs + 1;
/* copy metadata from source packet*/
- hdr->pkt.in_port = pkt->pkt.in_port;
- hdr->pkt.vlan_macip = pkt->pkt.vlan_macip;
- hdr->pkt.hash = pkt->pkt.hash;
+ hdr->port = pkt->port;
+ hdr->vlan_tci = pkt->vlan_tci;
+ hdr->vlan_tci_outer = pkt->vlan_tci_outer;
+ hdr->tx_offload = pkt->tx_offload;
+ hdr->hash = pkt->hash;
hdr->ol_flags = pkt->ol_flags;
- __rte_mbuf_sanity_check(hdr, RTE_MBUF_PKT, 1);
- return (hdr);
+ __rte_mbuf_sanity_check(hdr, 1);
+ return hdr;
}
/*
*/
static inline void
mcast_send_pkt(struct rte_mbuf *pkt, struct ether_addr *dest_addr,
- struct lcore_queue_conf *qconf, uint8_t port)
+ struct lcore_queue_conf *qconf, uint16_t port)
{
struct ether_hdr *ethdr;
uint16_t len;
/* Construct Ethernet header. */
ethdr = (struct ether_hdr *)rte_pktmbuf_prepend(pkt, (uint16_t)sizeof(*ethdr));
- RTE_MBUF_ASSERT(ethdr != NULL);
+ RTE_ASSERT(ethdr != NULL);
ether_addr_copy(dest_addr, ðdr->d_addr);
ether_addr_copy(&ports_eth_addr[port], ðdr->s_addr);
struct ipv4_hdr *iphdr;
uint32_t dest_addr, port_mask, port_num, use_clone;
int32_t hash;
- uint8_t port;
+ uint16_t port;
union {
uint64_t as_int;
struct ether_addr as_addr;
/* Remove the Ethernet header from the input packet */
iphdr = (struct ipv4_hdr *)rte_pktmbuf_adj(m, (uint16_t)sizeof(struct ether_hdr));
- RTE_MBUF_ASSERT(iphdr != NULL);
+ RTE_ASSERT(iphdr != NULL);
dest_addr = rte_be_to_cpu_32(iphdr->dst_addr);
/* Should we use rte_pktmbuf_clone() or not. */
use_clone = (port_num <= MCAST_CLONE_PORTS &&
- m->pkt.nb_segs <= MCAST_CLONE_SEGS);
+ m->nb_segs <= MCAST_CLONE_SEGS);
/* Mark all packet's segments as referenced port_num times */
if (use_clone == 0)
send_timeout_burst(struct lcore_queue_conf *qconf)
{
uint64_t cur_tsc;
- uint8_t portid;
+ uint16_t portid;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
cur_tsc = rte_rdtsc();
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
unsigned lcore_id;
int i, j, nb_rx;
- uint8_t portid;
+ uint16_t portid;
struct lcore_queue_conf *qconf;
lcore_id = rte_lcore_id();
portid = qconf->rx_queue_list[i];
RTE_LOG(INFO, IPv4_MULTICAST, " -- lcoreid=%u portid=%d\n",
- lcore_id, (int) portid);
+ lcore_id, portid);
}
while (1) {
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
return 0;
- return ((uint32_t)pm);
+ return (uint32_t)pm;
}
static int
n = strtoul(q_arg, &end, 0);
if (errno != 0 || end == NULL || *end != '\0' ||
n == 0 || n >= MAX_RX_QUEUE_PER_LCORE)
- return (-1);
+ return -1;
- return (n);
+ return n;
}
/* Parse the argument given in the command line of the application */
argv[optind-1] = prgname;
ret = optind-1;
- optind = 0; /* reset getopt lib */
+ optind = 1; /* reset getopt lib */
return ret;
}
static void
print_ethaddr(const char *name, struct ether_addr *eth_addr)
{
- printf("%s%02X:%02X:%02X:%02X:%02X:%02X", name,
- eth_addr->addr_bytes[0],
- eth_addr->addr_bytes[1],
- eth_addr->addr_bytes[2],
- eth_addr->addr_bytes[3],
- eth_addr->addr_bytes[4],
- eth_addr->addr_bytes[5]);
+ char buf[ETHER_ADDR_FMT_SIZE];
+ ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+ printf("%s%s", name, buf);
}
static int
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("\nChecking link status");
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
+ printf(
+ "Port%d Link Up. Speed %u Mbps - %s\n",
+ portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == 0) {
+ if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
}
int
-MAIN(int argc, char **argv)
+main(int argc, char **argv)
{
struct lcore_queue_conf *qconf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_txconf *txconf;
int ret;
uint16_t queueid;
unsigned lcore_id = 0, rx_lcore_id = 0;
uint32_t n_tx_queue, nb_lcores;
- uint8_t portid;
+ uint16_t portid;
/* init EAL */
ret = rte_eal_init(argc, argv);
rte_exit(EXIT_FAILURE, "Invalid IPV4_MULTICAST parameters\n");
/* create the mbuf pools */
- packet_pool = rte_mempool_create("packet_pool", NB_PKT_MBUF,
- PKT_MBUF_SIZE, 32, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ packet_pool = rte_pktmbuf_pool_create("packet_pool", NB_PKT_MBUF, 32,
+ 0, PKT_MBUF_DATA_SIZE, rte_socket_id());
if (packet_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init packet mbuf pool\n");
- header_pool = rte_mempool_create("header_pool", NB_HDR_MBUF,
- HDR_MBUF_SIZE, 32, 0, NULL, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ header_pool = rte_pktmbuf_pool_create("header_pool", NB_HDR_MBUF, 32,
+ 0, HDR_MBUF_DATA_SIZE, rte_socket_id());
if (header_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init header mbuf pool\n");
- clone_pool = rte_mempool_create("clone_pool", NB_CLONE_MBUF,
- CLONE_MBUF_SIZE, 32, 0, NULL, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ clone_pool = rte_pktmbuf_pool_create("clone_pool", NB_CLONE_MBUF, 32,
+ 0, 0, rte_socket_id());
if (clone_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init clone mbuf pool\n");
- /* init driver */
- if (rte_pmd_init_all() < 0)
- rte_exit(EXIT_FAILURE, "Cannot init pmd\n");
-
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
nb_ports = rte_eth_dev_count();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No physical ports!\n");
qconf = &lcore_queue_conf[rx_lcore_id];
+ /* limit the frame size to the maximum supported by NIC */
+ rte_eth_dev_info_get(portid, &dev_info);
+ port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
+ dev_info.max_rx_pktlen, port_conf.rxmode.max_rx_pkt_len);
+
/* get the lcore_id for this port */
while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
qconf->n_rx_queue == (unsigned)rx_queue_per_lcore) {
rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n",
ret, portid);
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+ &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot adjust number of descriptors: err=%d, port=%d\n",
+ ret, portid);
+
rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
print_ethaddr(" Address:", &ports_eth_addr[portid]);
printf(", ");
printf("rxq=%hu ", queueid);
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
- rte_eth_dev_socket_id(portid), &rx_conf,
+ rte_eth_dev_socket_id(portid),
+ NULL,
packet_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, port=%d\n",
continue;
printf("txq=%u,%hu ", lcore_id, queueid);
fflush(stdout);
+
+ txconf = &dev_info.default_txconf;
+ txconf->txq_flags = 0;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
- rte_lcore_to_socket_id(lcore_id), &tx_conf);
+ rte_lcore_to_socket_id(lcore_id), txconf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);
git.droids-corp.org / dpdk.git / blobdiff