net: add rte prefix to ether structures
[dpdk.git] / examples / l2fwd / main.c
index 72afddd..c1d6797 100644 (file)
@@ -53,13 +53,13 @@ static int mac_updating = 1;
 /*
  * Configurable number of RX/TX ring descriptors
  */
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
 
 /* ethernet addresses of ports */
-static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
 
 /* mask of enabled ports */
 static uint32_t l2fwd_enabled_port_mask = 0;
@@ -79,14 +79,9 @@ struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
 
 static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
 
-static const struct rte_eth_conf port_conf = {
+static struct rte_eth_conf port_conf = {
        .rxmode = {
                .split_hdr_size = 0,
-               .header_split   = 0, /**< Header Split disabled */
-               .hw_ip_checksum = 0, /**< IP checksum offload disabled */
-               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
-               .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
-               .hw_strip_crc   = 1, /**< CRC stripped by hardware */
        },
        .txmode = {
                .mq_mode = ETH_MQ_TX_NONE,
@@ -156,10 +151,10 @@ print_stats(void)
 static void
 l2fwd_mac_updating(struct rte_mbuf *m, unsigned dest_portid)
 {
-       struct ether_hdr *eth;
+       struct rte_ether_hdr *eth;
        void *tmp;
 
-       eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+       eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
 
        /* 02:00:00:00:00:xx */
        tmp = &eth->d_addr.addr_bytes[0];
@@ -447,7 +442,7 @@ l2fwd_parse_args(int argc, char **argv)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
@@ -461,7 +456,7 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
                if (force_quit)
                        return;
                all_ports_up = 1;
-               for (portid = 0; portid < port_num; portid++) {
+               RTE_ETH_FOREACH_DEV(portid) {
                        if (force_quit)
                                return;
                        if ((port_mask & (1 << portid)) == 0)
@@ -520,7 +515,7 @@ main(int argc, char **argv)
        struct lcore_queue_conf *qconf;
        int ret;
        uint16_t nb_ports;
-       uint16_t nb_ports_available;
+       uint16_t nb_ports_available = 0;
        uint16_t portid, last_port;
        unsigned lcore_id, rx_lcore_id;
        unsigned nb_ports_in_mask = 0;
@@ -548,10 +543,15 @@ main(int argc, char **argv)
        /* convert to number of cycles */
        timer_period *= rte_get_timer_hz();
 
-       nb_ports = rte_eth_dev_count();
+       nb_ports = rte_eth_dev_count_avail();
        if (nb_ports == 0)
                rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
 
+       /* check port mask to possible port mask */
+       if (l2fwd_enabled_port_mask & ~((1 << nb_ports) - 1))
+               rte_exit(EXIT_FAILURE, "Invalid portmask; possible (0x%x)\n",
+                       (1 << nb_ports) - 1);
+
        /* reset l2fwd_dst_ports */
        for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
                l2fwd_dst_ports[portid] = 0;
@@ -560,7 +560,7 @@ main(int argc, char **argv)
        /*
         * Each logical core is assigned a dedicated TX queue on each port.
         */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
@@ -583,7 +583,7 @@ main(int argc, char **argv)
        qconf = NULL;
 
        /* Initialize the port/queue configuration of each logical core */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
@@ -608,8 +608,6 @@ main(int argc, char **argv)
                printf("Lcore %u: RX port %u\n", rx_lcore_id, portid);
        }
 
-       nb_ports_available = nb_ports;
-
        nb_mbufs = RTE_MAX(nb_ports * (nb_rxd + nb_txd + MAX_PKT_BURST +
                nb_lcores * MEMPOOL_CACHE_SIZE), 8192U);
 
@@ -621,17 +619,27 @@ main(int argc, char **argv)
                rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
 
        /* Initialise each port */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
+               struct rte_eth_rxconf rxq_conf;
+               struct rte_eth_txconf txq_conf;
+               struct rte_eth_conf local_port_conf = port_conf;
+               struct rte_eth_dev_info dev_info;
+
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
                        printf("Skipping disabled port %u\n", portid);
-                       nb_ports_available--;
                        continue;
                }
+               nb_ports_available++;
+
                /* init port */
                printf("Initializing port %u... ", portid);
                fflush(stdout);
-               ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+               rte_eth_dev_info_get(portid, &dev_info);
+               if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+                       local_port_conf.txmode.offloads |=
+                               DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+               ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
                                  ret, portid);
@@ -647,9 +655,11 @@ main(int argc, char **argv)
 
                /* init one RX queue */
                fflush(stdout);
+               rxq_conf = dev_info.default_rxconf;
+               rxq_conf.offloads = local_port_conf.rxmode.offloads;
                ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
                                             rte_eth_dev_socket_id(portid),
-                                            NULL,
+                                            &rxq_conf,
                                             l2fwd_pktmbuf_pool);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
@@ -657,9 +667,11 @@ main(int argc, char **argv)
 
                /* init one TX queue on each port */
                fflush(stdout);
+               txq_conf = dev_info.default_txconf;
+               txq_conf.offloads = local_port_conf.txmode.offloads;
                ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
                                rte_eth_dev_socket_id(portid),
-                               NULL);
+                               &txq_conf);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup:err=%d, port=%u\n",
                                ret, portid);
@@ -710,7 +722,7 @@ main(int argc, char **argv)
                        "All available ports are disabled. Please set portmask.\n");
        }
 
-       check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+       check_all_ports_link_status(l2fwd_enabled_port_mask);
 
        ret = 0;
        /* launch per-lcore init on every lcore */
@@ -722,7 +734,7 @@ main(int argc, char **argv)
                }
        }
 
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
                printf("Closing port %d...", portid);