doc: whitespace changes in licenses
[dpdk.git] / examples / l3fwd-vf / main.c
index 6f8d22b..fb63308 100644 (file)
@@ -1,35 +1,34 @@
 /*-
  *   BSD LICENSE
  * 
- *   Copyright(c) 2010-2012 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
  *   All rights reserved.
  * 
- *   Redistribution and use in source and binary forms, with or without 
- *   modification, are permitted provided that the following conditions 
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
  *   are met:
  * 
- *     * Redistributions of source code must retain the above copyright 
+ *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright 
- *       notice, this list of conditions and the following disclaimer in 
- *       the documentation and/or other materials provided with the 
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
  *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its 
- *       contributors may be used to endorse or promote products derived 
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
  *       from this software without specific prior written permission.
  * 
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * 
  */
 
 #include <stdio.h>
@@ -42,6 +41,7 @@
 #include <stdarg.h>
 #include <errno.h>
 #include <getopt.h>
+#include <signal.h>
 
 #include <rte_common.h>
 #include <rte_byteorder.h>
@@ -86,8 +86,6 @@
 
 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
 #include <rte_hash.h>
-#include <rte_hash_crc.h>
-#include <rte_jhash.h>
 #elif (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
 #include <rte_lpm.h>
 #else
@@ -96,8 +94,6 @@
 
 #define RTE_LOGTYPE_L3FWD RTE_LOGTYPE_USER1
 
-#define MAX_PORTS 32
-
 #define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
 #define NB_MBUF   8192
 
 #define TX_WTHRESH 0  /**< Default values of TX write-back threshold reg. */
 
 #define MAX_PKT_BURST 32
-#define BURST_TX_DRAIN 200000ULL /* around 100us at 2 Ghz */
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
 
 #define NB_SOCKETS 8
 
@@ -139,7 +135,7 @@ static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
 
 /* ethernet addresses of ports */
-static struct ether_addr ports_eth_addr[MAX_PORTS];
+static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 
 /* mask of enabled ports */
 static uint32_t enabled_port_mask = 0;
@@ -195,10 +191,11 @@ static struct rte_eth_conf port_conf = {
        .rx_adv_conf = {
                .rss_conf = {
                        .rss_key = NULL,
-                       .rss_hf = ETH_RSS_IPV4,
+                       .rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6,
                },
        },
        .txmode = {
+               .mq_mode = ETH_MQ_TX_NONE,
        },
 };
 
@@ -224,6 +221,15 @@ static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
 
 
 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
+
+#ifdef RTE_MACHINE_CPUFLAG_SSE4_2
+#include <rte_hash_crc.h>
+#define DEFAULT_HASH_FUNC       rte_hash_crc
+#else
+#include <rte_jhash.h>
+#define DEFAULT_HASH_FUNC       rte_jhash
+#endif
+
 struct ipv4_5tuple {
        uint32_t ip_dst;
        uint32_t ip_src;
@@ -253,7 +259,7 @@ struct rte_hash_parameters l3fwd_hash_params = {
        .entries = L3FWD_HASH_ENTRIES,
        .bucket_entries = 4,
        .key_len = sizeof(struct ipv4_5tuple),
-       .hash_func = rte_hash_crc,
+       .hash_func = DEFAULT_HASH_FUNC,
        .hash_func_init_val = 0,
        .socket_id = SOCKET0,
 };
@@ -295,7 +301,7 @@ struct lcore_conf {
        uint16_t n_rx_queue;
        struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
        uint16_t tx_queue_id;
-       struct mbuf_table tx_mbufs[MAX_PORTS];
+       struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
        lookup_struct_t * lookup_struct;
 } __rte_cache_aligned;
 
@@ -468,12 +474,12 @@ l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid, lookup_struct_t * l3fwd
 #endif
 
        dst_port = get_dst_port(ipv4_hdr, portid, l3fwd_lookup_struct);
-       if (dst_port >= MAX_PORTS || (enabled_port_mask & 1 << dst_port) == 0)
+       if (dst_port >= RTE_MAX_ETHPORTS || (enabled_port_mask & 1 << dst_port) == 0)
                dst_port = portid;
 
-       /* 00:09:c0:00:00:xx */
+       /* 02:00:00:00:00:xx */
        tmp = &eth_hdr->d_addr.addr_bytes[0];
-       *((uint64_t *)tmp) = 0x000000c00900 + (dst_port << 24);
+       *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
 
 #ifdef DO_RFC_1812_CHECKS
        /* Update time to live and header checksum */
@@ -489,23 +495,25 @@ l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid, lookup_struct_t * l3fwd
 }
 
 /* main processing loop */
-static __attribute__((noreturn)) int
+static int
 main_loop(__attribute__((unused)) void *dummy)
 {
        struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
        unsigned lcore_id;
-       uint64_t prev_tsc = 0;
-       uint64_t diff_tsc, cur_tsc;
+       uint64_t prev_tsc, diff_tsc, cur_tsc;
        int i, j, nb_rx;
        uint8_t portid, queueid;
        struct lcore_conf *qconf;
+       const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+
+       prev_tsc = 0;
 
        lcore_id = rte_lcore_id();
        qconf = &lcore_conf[lcore_id];
 
        if (qconf->n_rx_queue == 0) {
                RTE_LOG(INFO, L3FWD, "lcore %u has nothing to do\n", lcore_id);
-               while(1);
+               return 0;
        }
 
        RTE_LOG(INFO, L3FWD, "entering main loop on lcore %u\n", lcore_id);
@@ -526,13 +534,13 @@ main_loop(__attribute__((unused)) void *dummy)
                 * TX burst queue drain
                 */
                diff_tsc = cur_tsc - prev_tsc;
-               if (unlikely(diff_tsc > BURST_TX_DRAIN)) {
+               if (unlikely(diff_tsc > drain_tsc)) {
 
                        /*
                         * This could be optimized (use queueid instead of
                         * portid), but it is not called so often
                         */
-                       for (portid = 0; portid < MAX_PORTS; portid++) {
+                       for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
                                if (qconf->tx_mbufs[portid].len == 0)
                                        continue;
                                send_burst(&lcore_conf[lcore_id],
@@ -670,6 +678,24 @@ print_usage(const char *prgname)
                prgname);
 }
 
+/* Custom handling of signals to handle process terminal */
+static void
+signal_handler(int signum)
+{
+       uint8_t portid;
+       uint8_t nb_ports = rte_eth_dev_count();
+
+       /* When we receive a SIGINT signal */
+       if (signum == SIGINT) {
+               for (portid = 0; portid < nb_ports; portid++) {
+                       /* skip ports that are not enabled */
+                       if ((enabled_port_mask & (1 << portid)) == 0) 
+                               continue;
+                       rte_eth_dev_close(portid); 
+               }
+       }
+       rte_exit(EXIT_SUCCESS, "\n User forced exit\n");
+}
 static int
 parse_portmask(const char *portmask)
 {
@@ -854,7 +880,7 @@ setup_lpm(int socketid)
        /* create the LPM table */
        rte_snprintf(s, sizeof(s), "L3FWD_LPM_%d", socketid);
        l3fwd_lookup_struct[socketid] = rte_lpm_create(s, socketid,
-                               L3FWD_LPM_MAX_RULES, RTE_LPM_MEMZONE);
+                               L3FWD_LPM_MAX_RULES, 0);
        if (l3fwd_lookup_struct[socketid] == NULL)
                rte_exit(EXIT_FAILURE, "Unable to create the l3fwd LPM table"
                                " on socket %d\n", socketid);
@@ -936,6 +962,7 @@ MAIN(int argc, char **argv)
        unsigned lcore_id;
        uint8_t portid, nb_rx_queue, queue, socketid;
 
+       signal(SIGINT, signal_handler);
        /* init EAL */
        ret = rte_eal_init(argc, argv);
        if (ret < 0)
@@ -960,24 +987,15 @@ MAIN(int argc, char **argv)
                rte_exit(EXIT_FAILURE, "init_mem failed\n");
 
        /* init driver */
-#ifdef RTE_LIBRTE_IGB_PMD
-       if (rte_igb_pmd_init() < 0)
-               rte_exit(EXIT_FAILURE, "Cannot init igb pmd\n");
-#endif
-#ifdef RTE_LIBRTE_IXGBE_PMD
-       if (rte_ixgbe_pmd_init() < 0)
-               rte_exit(EXIT_FAILURE, "Cannot init ixgbe pmd\n");
-
-       if (rte_ixgbevf_pmd_init() < 0)
-               rte_exit(EXIT_FAILURE, "Cannot init ixgbevf pmd\n");
-#endif
+       if (rte_pmd_init_all() < 0)
+               rte_exit(EXIT_FAILURE, "Cannot init pmd\n");
 
        if (rte_eal_pci_probe() < 0)
                rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
 
        nb_ports = rte_eth_dev_count();
-       if (nb_ports > MAX_PORTS)
-               nb_ports = MAX_PORTS;
+       if (nb_ports > RTE_MAX_ETHPORTS)
+               nb_ports = RTE_MAX_ETHPORTS;
 
        if (check_port_config(nb_ports) < 0)
                rte_exit(EXIT_FAILURE, "check_port_config failed\n");