net: add rte prefix to ether defines
[dpdk.git] / examples / l3fwd / main.c
index ceb5bbb..570693b 100644 (file)
@@ -50,8 +50,8 @@
 /*
  * Configurable number of RX/TX ring descriptors
  */
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
 
 #define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
 #define MAX_RX_QUEUE_PER_PORT 128
@@ -69,17 +69,19 @@ static int promiscuous_on;
 static int l3fwd_lpm_on;
 static int l3fwd_em_on;
 
+/* Global variables. */
+
 static int numa_on = 1; /**< NUMA is enabled by default. */
 static int parse_ptype; /**< Parse packet type using rx callback, and */
                        /**< disabled by default */
-
-/* Global variables. */
+static int per_port_pool; /**< Use separate buffer pools per port; disabled */
+                         /**< by default */
 
 volatile bool force_quit;
 
 /* ethernet addresses of ports */
 uint64_t dest_eth_addr[RTE_MAX_ETHPORTS];
-struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 
 xmm_t val_eth[RTE_MAX_ETHPORTS];
 
@@ -118,13 +120,9 @@ static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
 static struct rte_eth_conf port_conf = {
        .rxmode = {
                .mq_mode = ETH_MQ_RX_RSS,
-               .max_rx_pkt_len = ETHER_MAX_LEN,
+               .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
                .split_hdr_size = 0,
-               .header_split   = 0, /**< Header Split disabled */
-               .hw_ip_checksum = 1, /**< IP checksum offload enabled */
-               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
-               .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
-               .hw_strip_crc   = 1, /**< CRC stripped by hardware */
+               .offloads = DEV_RX_OFFLOAD_CHECKSUM,
        },
        .rx_adv_conf = {
                .rss_conf = {
@@ -137,7 +135,8 @@ static struct rte_eth_conf port_conf = {
        },
 };
 
-static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
+static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS];
+static uint8_t lkp_per_socket[NB_SOCKETS];
 
 struct l3fwd_lkp_mode {
        void  (*setup)(int);
@@ -212,7 +211,7 @@ check_lcore_params(void)
 }
 
 static int
-check_port_config(const unsigned nb_ports)
+check_port_config(void)
 {
        uint16_t portid;
        uint16_t i;
@@ -223,7 +222,7 @@ check_port_config(const unsigned nb_ports)
                        printf("port %u is not enabled in port mask\n", portid);
                        return -1;
                }
-               if (portid >= nb_ports) {
+               if (!rte_eth_dev_is_valid_port(portid)) {
                        printf("port %u is not present on the board\n", portid);
                        return -1;
                }
@@ -289,7 +288,8 @@ print_usage(const char *prgname)
                " [--no-numa]"
                " [--hash-entry-num]"
                " [--ipv6]"
-               " [--parse-ptype]\n\n"
+               " [--parse-ptype]"
+               " [--per-port-pool]\n\n"
 
                "  -p PORTMASK: Hexadecimal bitmask of ports to configure\n"
                "  -P : Enable promiscuous mode\n"
@@ -303,7 +303,8 @@ print_usage(const char *prgname)
                "  --no-numa: Disable numa awareness\n"
                "  --hash-entry-num: Specify the hash entry number in hexadecimal to be setup\n"
                "  --ipv6: Set if running ipv6 packets\n"
-               "  --parse-ptype: Set to use software to analyze packet type\n\n",
+               "  --parse-ptype: Set to use software to analyze packet type\n"
+               "  --per-port-pool: Use separate buffer pool per port\n\n",
                prgname);
 }
 
@@ -456,6 +457,7 @@ static const char short_options[] =
 #define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo"
 #define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
 #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
+#define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
 enum {
        /* long options mapped to a short option */
 
@@ -469,6 +471,7 @@ enum {
        CMD_LINE_OPT_ENABLE_JUMBO_NUM,
        CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
        CMD_LINE_OPT_PARSE_PTYPE_NUM,
+       CMD_LINE_OPT_PARSE_PER_PORT_POOL,
 };
 
 static const struct option lgopts[] = {
@@ -479,6 +482,7 @@ static const struct option lgopts[] = {
        {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM},
        {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
        {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
+       {CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
        {NULL, 0, 0, 0}
 };
 
@@ -489,10 +493,10 @@ static const struct option lgopts[] = {
  * RTE_MAX is used to ensure that NB_MBUF never goes below a minimum
  * value of 8192
  */
-#define NB_MBUF RTE_MAX(       \
-       (nb_ports*nb_rx_queue*nb_rxd +          \
-       nb_ports*nb_lcores*MAX_PKT_BURST +      \
-       nb_ports*n_tx_queue*nb_txd +            \
+#define NB_MBUF(nports) RTE_MAX(       \
+       (nports*nb_rx_queue*nb_rxd +            \
+       nports*nb_lcores*MAX_PKT_BURST +        \
+       nports*n_tx_queue*nb_txd +              \
        nb_lcores*MEMPOOL_CACHE_SIZE),          \
        (unsigned)8192)
 
@@ -561,12 +565,12 @@ parse_args(int argc, char **argv)
                                "max-pkt-len", required_argument, 0, 0
                        };
 
-
-                       port_conf.rxmode.jumbo_frame = 1;
+                       port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+                       port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
 
                        /*
                         * if no max-pkt-len set, use the default
-                        * value ETHER_MAX_LEN.
+                        * value RTE_ETHER_MAX_LEN.
                         */
                        if (getopt_long(argc, argvopt, "",
                                        &lenopts, &option_index) == 0) {
@@ -598,6 +602,11 @@ parse_args(int argc, char **argv)
                        parse_ptype = 1;
                        break;
 
+               case CMD_LINE_OPT_PARSE_PER_PORT_POOL:
+                       printf("per port buffer pool is enabled\n");
+                       per_port_pool = 1;
+                       break;
+
                default:
                        print_usage(prgname);
                        return -1;
@@ -638,15 +647,15 @@ parse_args(int argc, char **argv)
 }
 
 static void
-print_ethaddr(const char *name, const struct ether_addr *eth_addr)
+print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
 {
-       char buf[ETHER_ADDR_FMT_SIZE];
-       ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+       char buf[RTE_ETHER_ADDR_FMT_SIZE];
+       rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
        printf("%s%s", name, buf);
 }
 
 static int
-init_mem(unsigned nb_mbuf)
+init_mem(uint16_t portid, unsigned int nb_mbuf)
 {
        struct lcore_conf *qconf;
        int socketid;
@@ -668,13 +677,14 @@ init_mem(unsigned nb_mbuf)
                                socketid, lcore_id, NB_SOCKETS);
                }
 
-               if (pktmbuf_pool[socketid] == NULL) {
-                       snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
-                       pktmbuf_pool[socketid] =
+               if (pktmbuf_pool[portid][socketid] == NULL) {
+                       snprintf(s, sizeof(s), "mbuf_pool_%d:%d",
+                                portid, socketid);
+                       pktmbuf_pool[portid][socketid] =
                                rte_pktmbuf_pool_create(s, nb_mbuf,
                                        MEMPOOL_CACHE_SIZE, 0,
                                        RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
-                       if (pktmbuf_pool[socketid] == NULL)
+                       if (pktmbuf_pool[portid][socketid] == NULL)
                                rte_exit(EXIT_FAILURE,
                                        "Cannot init mbuf pool on socket %d\n",
                                        socketid);
@@ -682,8 +692,13 @@ init_mem(unsigned nb_mbuf)
                                printf("Allocated mbuf pool on socket %d\n",
                                        socketid);
 
-                       /* Setup either LPM or EM(f.e Hash).  */
-                       l3fwd_lkp.setup(socketid);
+                       /* Setup either LPM or EM(f.e Hash). But, only once per
+                        * available socket.
+                        */
+                       if (!lkp_per_socket[socketid]) {
+                               l3fwd_lkp.setup(socketid);
+                               lkp_per_socket[socketid] = 1;
+                       }
                }
                qconf = &lcore_conf[lcore_id];
                qconf->ipv4_lookup_struct =
@@ -696,7 +711,7 @@ init_mem(unsigned nb_mbuf)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
@@ -710,7 +725,7 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
                if (force_quit)
                        return;
                all_ports_up = 1;
-               for (portid = 0; portid < port_num; portid++) {
+               RTE_ETH_FOREACH_DEV(portid) {
                        if (force_quit)
                                return;
                        if ((port_mask & (1 << portid)) == 0)
@@ -812,7 +827,7 @@ main(int argc, char **argv)
        /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */
        for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
                dest_eth_addr[portid] =
-                       ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
+                       RTE_ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
                *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
        }
 
@@ -828,9 +843,9 @@ main(int argc, char **argv)
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
 
-       nb_ports = rte_eth_dev_count();
+       nb_ports = rte_eth_dev_count_avail();
 
-       if (check_port_config(nb_ports) < 0)
+       if (check_port_config() < 0)
                rte_exit(EXIT_FAILURE, "check_port_config failed\n");
 
        nb_lcores = rte_lcore_count();
@@ -839,7 +854,9 @@ main(int argc, char **argv)
        setup_l3fwd_lookup_tables();
 
        /* initialize all ports */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
+               struct rte_eth_conf local_port_conf = port_conf;
+
                /* skip ports that are not enabled */
                if ((enabled_port_mask & (1 << portid)) == 0) {
                        printf("\nSkipping disabled port %d\n", portid);
@@ -856,8 +873,25 @@ main(int argc, char **argv)
                        n_tx_queue = MAX_TX_QUEUE_PER_PORT;
                printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
                        nb_rx_queue, (unsigned)n_tx_queue );
+
+               rte_eth_dev_info_get(portid, &dev_info);
+               if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+                       local_port_conf.txmode.offloads |=
+                               DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+               local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
+                       dev_info.flow_type_rss_offloads;
+               if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
+                               port_conf.rx_adv_conf.rss_conf.rss_hf) {
+                       printf("Port %u modified RSS hash function based on hardware support,"
+                               "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+                               portid,
+                               port_conf.rx_adv_conf.rss_conf.rss_hf,
+                               local_port_conf.rx_adv_conf.rss_conf.rss_hf);
+               }
+
                ret = rte_eth_dev_configure(portid, nb_rx_queue,
-                                       (uint16_t)n_tx_queue, &port_conf);
+                                       (uint16_t)n_tx_queue, &local_port_conf);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE,
                                "Cannot configure device: err=%d, port=%d\n",
@@ -874,17 +908,24 @@ main(int argc, char **argv)
                print_ethaddr(" Address:", &ports_eth_addr[portid]);
                printf(", ");
                print_ethaddr("Destination:",
-                       (const struct ether_addr *)&dest_eth_addr[portid]);
+                       (const struct rte_ether_addr *)&dest_eth_addr[portid]);
                printf(", ");
 
                /*
                 * prepare src MACs for each port.
                 */
-               ether_addr_copy(&ports_eth_addr[portid],
-                       (struct ether_addr *)(val_eth + portid) + 1);
+               rte_ether_addr_copy(&ports_eth_addr[portid],
+                       (struct rte_ether_addr *)(val_eth + portid) + 1);
 
                /* init memory */
-               ret = init_mem(NB_MBUF);
+               if (!per_port_pool) {
+                       /* portid = 0; this is *not* signifying the first port,
+                        * rather, it signifies that portid is ignored.
+                        */
+                       ret = init_mem(0, NB_MBUF(nb_ports));
+               } else {
+                       ret = init_mem(portid, NB_MBUF(1));
+               }
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "init_mem failed\n");
 
@@ -903,10 +944,8 @@ main(int argc, char **argv)
                        printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
                        fflush(stdout);
 
-                       rte_eth_dev_info_get(portid, &dev_info);
                        txconf = &dev_info.default_txconf;
-                       if (port_conf.rxmode.jumbo_frame)
-                               txconf->txq_flags = 0;
+                       txconf->offloads = local_port_conf.txmode.offloads;
                        ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
                                                     socketid, txconf);
                        if (ret < 0)
@@ -932,8 +971,14 @@ main(int argc, char **argv)
                fflush(stdout);
                /* init RX queues */
                for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
+                       struct rte_eth_dev *dev;
+                       struct rte_eth_conf *conf;
+                       struct rte_eth_rxconf rxq_conf;
+
                        portid = qconf->rx_queue_list[queue].port_id;
                        queueid = qconf->rx_queue_list[queue].queue_id;
+                       dev = &rte_eth_devices[portid];
+                       conf = &dev->data->dev_conf;
 
                        if (numa_on)
                                socketid =
@@ -944,10 +989,19 @@ main(int argc, char **argv)
                        printf("rxq=%d,%d,%d ", portid, queueid, socketid);
                        fflush(stdout);
 
-                       ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
-                                       socketid,
-                                       NULL,
-                                       pktmbuf_pool[socketid]);
+                       rte_eth_dev_info_get(portid, &dev_info);
+                       rxq_conf = dev_info.default_rxconf;
+                       rxq_conf.offloads = conf->rxmode.offloads;
+                       if (!per_port_pool)
+                               ret = rte_eth_rx_queue_setup(portid, queueid,
+                                               nb_rxd, socketid,
+                                               &rxq_conf,
+                                               pktmbuf_pool[0][socketid]);
+                       else
+                               ret = rte_eth_rx_queue_setup(portid, queueid,
+                                               nb_rxd, socketid,
+                                               &rxq_conf,
+                                               pktmbuf_pool[portid][socketid]);
                        if (ret < 0)
                                rte_exit(EXIT_FAILURE,
                                "rte_eth_rx_queue_setup: err=%d, port=%d\n",
@@ -958,7 +1012,7 @@ main(int argc, char **argv)
        printf("\n");
 
        /* start ports */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                if ((enabled_port_mask & (1 << portid)) == 0) {
                        continue;
                }
@@ -994,7 +1048,7 @@ main(int argc, char **argv)
        }
 
 
-       check_all_ports_link_status(nb_ports, enabled_port_mask);
+       check_all_ports_link_status(enabled_port_mask);
 
        ret = 0;
        /* launch per-lcore init on every lcore */
@@ -1007,7 +1061,7 @@ main(int argc, char **argv)
        }
 
        /* stop ports */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                if ((enabled_port_mask & (1 << portid)) == 0)
                        continue;
                printf("Closing port %d...", portid);