examples: fix port mask parsing failure handling
[dpdk.git] / examples / l3fwd / main.c
index 7a79cd2..de6c622 100644 (file)
@@ -1,34 +1,5 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation
  */
 
 #include <stdio.h>
 #include <rte_vect.h>
 #include <rte_byteorder.h>
 #include <rte_log.h>
+#include <rte_malloc.h>
 #include <rte_memory.h>
 #include <rte_memcpy.h>
-#include <rte_memzone.h>
 #include <rte_eal.h>
-#include <rte_per_lcore.h>
 #include <rte_launch.h>
 #include <rte_atomic.h>
 #include <rte_cycles.h>
 #include <rte_per_lcore.h>
 #include <rte_branch_prediction.h>
 #include <rte_interrupts.h>
-#include <rte_pci.h>
 #include <rte_random.h>
 #include <rte_debug.h>
 #include <rte_ether.h>
-#include <rte_ethdev.h>
-#include <rte_ring.h>
 #include <rte_mempool.h>
 #include <rte_mbuf.h>
 #include <rte_ip.h>
 #include <cmdline_parse_etheraddr.h>
 
 #include "l3fwd.h"
-
-/*
- * Configurable number of RX/TX ring descriptors
- */
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#include "l3fwd_event.h"
 
 #define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
 #define MAX_RX_QUEUE_PER_PORT 128
@@ -102,17 +64,19 @@ static int promiscuous_on;
 static int l3fwd_lpm_on;
 static int l3fwd_em_on;
 
+/* Global variables. */
+
 static int numa_on = 1; /**< NUMA is enabled by default. */
 static int parse_ptype; /**< Parse packet type using rx callback, and */
                        /**< disabled by default */
-
-/* Global variables. */
+static int per_port_pool; /**< Use separate buffer pools per port; disabled */
+                         /**< by default */
 
 volatile bool force_quit;
 
 /* ethernet addresses of ports */
 uint64_t dest_eth_addr[RTE_MAX_ETHPORTS];
-struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 
 xmm_t val_eth[RTE_MAX_ETHPORTS];
 
@@ -126,7 +90,7 @@ uint32_t hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT;
 struct lcore_conf lcore_conf[RTE_MAX_LCORE];
 
 struct lcore_params {
-       uint8_t port_id;
+       uint16_t port_id;
        uint8_t queue_id;
        uint8_t lcore_id;
 } __rte_cache_aligned;
@@ -151,13 +115,9 @@ static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
 static struct rte_eth_conf port_conf = {
        .rxmode = {
                .mq_mode = ETH_MQ_RX_RSS,
-               .max_rx_pkt_len = ETHER_MAX_LEN,
+               .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
                .split_hdr_size = 0,
-               .header_split   = 0, /**< Header Split disabled */
-               .hw_ip_checksum = 1, /**< IP checksum offload enabled */
-               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
-               .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
-               .hw_strip_crc   = 0, /**< CRC stripped by hardware */
+               .offloads = DEV_RX_OFFLOAD_CHECKSUM,
        },
        .rx_adv_conf = {
                .rss_conf = {
@@ -170,7 +130,8 @@ static struct rte_eth_conf port_conf = {
        },
 };
 
-static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
+static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS];
+static uint8_t lkp_per_socket[NB_SOCKETS];
 
 struct l3fwd_lkp_mode {
        void  (*setup)(int);
@@ -245,9 +206,9 @@ check_lcore_params(void)
 }
 
 static int
-check_port_config(const unsigned nb_ports)
+check_port_config(void)
 {
-       unsigned portid;
+       uint16_t portid;
        uint16_t i;
 
        for (i = 0; i < nb_lcore_params; ++i) {
@@ -256,7 +217,7 @@ check_port_config(const unsigned nb_ports)
                        printf("port %u is not enabled in port mask\n", portid);
                        return -1;
                }
-               if (portid >= nb_ports) {
+               if (!rte_eth_dev_is_valid_port(portid)) {
                        printf("port %u is not present on the board\n", portid);
                        return -1;
                }
@@ -265,7 +226,7 @@ check_port_config(const unsigned nb_ports)
 }
 
 static uint8_t
-get_port_n_rx_queues(const uint8_t port)
+get_port_n_rx_queues(const uint16_t port)
 {
        int queue = -1;
        uint16_t i;
@@ -311,20 +272,45 @@ init_lcore_rx_queues(void)
 static void
 print_usage(const char *prgname)
 {
-       printf ("%s [EAL options] -- -p PORTMASK -P"
-               "  [--config (port,queue,lcore)[,(port,queue,lcore]]"
-               "  [--enable-jumbo [--max-pkt-len PKTLEN]]\n"
-               "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
-               "  -P : enable promiscuous mode\n"
-               "  -E : enable exact match\n"
-               "  -L : enable longest prefix match\n"
-               "  --config (port,queue,lcore): rx queues configuration\n"
-               "  --eth-dest=X,MM:MM:MM:MM:MM:MM: optional, ethernet destination for port X\n"
-               "  --no-numa: optional, disable numa awareness\n"
-               "  --ipv6: optional, specify it if running ipv6 packets\n"
-               "  --enable-jumbo: enable jumbo frame"
-               " which max packet len is PKTLEN in decimal (64-9600)\n"
-               "  --hash-entry-num: specify the hash entry number in hexadecimal to be setup\n",
+       fprintf(stderr, "%s [EAL options] --"
+               " -p PORTMASK"
+               " [-P]"
+               " [-E]"
+               " [-L]"
+               " --config (port,queue,lcore)[,(port,queue,lcore)]"
+               " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
+               " [--enable-jumbo [--max-pkt-len PKTLEN]]"
+               " [--no-numa]"
+               " [--hash-entry-num]"
+               " [--ipv6]"
+               " [--parse-ptype]"
+               " [--per-port-pool]"
+               " [--mode]"
+               " [--eventq-sched]\n\n"
+
+               "  -p PORTMASK: Hexadecimal bitmask of ports to configure\n"
+               "  -P : Enable promiscuous mode\n"
+               "  -E : Enable exact match\n"
+               "  -L : Enable longest prefix match (default)\n"
+               "  --config (port,queue,lcore): Rx queue configuration\n"
+               "  --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
+               "  --enable-jumbo: Enable jumbo frames\n"
+               "  --max-pkt-len: Under the premise of enabling jumbo,\n"
+               "                 maximum packet length in decimal (64-9600)\n"
+               "  --no-numa: Disable numa awareness\n"
+               "  --hash-entry-num: Specify the hash entry number in hexadecimal to be setup\n"
+               "  --ipv6: Set if running ipv6 packets\n"
+               "  --parse-ptype: Set to use software to analyze packet type\n"
+               "  --per-port-pool: Use separate buffer pool per port\n"
+               "  --mode: Packet transfer mode for I/O, poll or eventdev\n"
+               "          Default mode = poll\n"
+               "  --eventq-sched: Event queue synchronization method\n"
+               "                  ordered, atomic or parallel.\n"
+               "                  Default: atomic\n"
+               "                  Valid only if --mode=eventdev\n"
+               "  --event-eth-rxqs: Number of ethernet RX queues per device.\n"
+               "                    Default: 1\n"
+               "                    Valid only if --mode=eventdev\n\n",
                prgname);
 }
 
@@ -354,10 +340,7 @@ parse_portmask(const char *portmask)
        /* parse hexadecimal string */
        pm = strtoul(portmask, &end, 16);
        if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
-               return -1;
-
-       if (pm == 0)
-               return -1;
+               return 0;
 
        return pm;
 }
@@ -435,7 +418,7 @@ parse_config(const char *q_arg)
 static void
 parse_eth_dest(const char *optarg)
 {
-       uint8_t portid;
+       uint16_t portid;
        char *port_end;
        uint8_t c, *dest, peer_addr[6];
 
@@ -460,8 +443,56 @@ parse_eth_dest(const char *optarg)
        *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
 }
 
+static void
+parse_mode(const char *optarg)
+{
+       struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+
+       if (!strcmp(optarg, "poll"))
+               evt_rsrc->enabled = false;
+       else if (!strcmp(optarg, "eventdev"))
+               evt_rsrc->enabled = true;
+}
+
+static void
+parse_eventq_sched(const char *optarg)
+{
+       struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+
+       if (!strcmp(optarg, "ordered"))
+               evt_rsrc->sched_type = RTE_SCHED_TYPE_ORDERED;
+       if (!strcmp(optarg, "atomic"))
+               evt_rsrc->sched_type = RTE_SCHED_TYPE_ATOMIC;
+       if (!strcmp(optarg, "parallel"))
+               evt_rsrc->sched_type = RTE_SCHED_TYPE_PARALLEL;
+}
+
+static void
+parse_event_eth_rx_queues(const char *eth_rx_queues)
+{
+       struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+       char *end = NULL;
+       uint8_t num_eth_rx_queues;
+
+       /* parse decimal string */
+       num_eth_rx_queues = strtoul(eth_rx_queues, &end, 10);
+       if ((eth_rx_queues[0] == '\0') || (end == NULL) || (*end != '\0'))
+               return;
+
+       if (num_eth_rx_queues == 0)
+               return;
+
+       evt_rsrc->eth_rx_queues = num_eth_rx_queues;
+}
+
 #define MAX_JUMBO_PKT_LEN  9600
-#define MEMPOOL_CACHE_SIZE 256
+
+static const char short_options[] =
+       "p:"  /* portmask */
+       "P"   /* promiscuous */
+       "L"   /* enable long prefix match */
+       "E"   /* enable exact match */
+       ;
 
 #define CMD_LINE_OPT_CONFIG "config"
 #define CMD_LINE_OPT_ETH_DEST "eth-dest"
@@ -470,6 +501,44 @@ parse_eth_dest(const char *optarg)
 #define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo"
 #define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
 #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
+#define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
+#define CMD_LINE_OPT_MODE "mode"
+#define CMD_LINE_OPT_EVENTQ_SYNC "eventq-sched"
+#define CMD_LINE_OPT_EVENT_ETH_RX_QUEUES "event-eth-rxqs"
+enum {
+       /* long options mapped to a short option */
+
+       /* first long only option value must be >= 256, so that we won't
+        * conflict with short options */
+       CMD_LINE_OPT_MIN_NUM = 256,
+       CMD_LINE_OPT_CONFIG_NUM,
+       CMD_LINE_OPT_ETH_DEST_NUM,
+       CMD_LINE_OPT_NO_NUMA_NUM,
+       CMD_LINE_OPT_IPV6_NUM,
+       CMD_LINE_OPT_ENABLE_JUMBO_NUM,
+       CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
+       CMD_LINE_OPT_PARSE_PTYPE_NUM,
+       CMD_LINE_OPT_PARSE_PER_PORT_POOL,
+       CMD_LINE_OPT_MODE_NUM,
+       CMD_LINE_OPT_EVENTQ_SYNC_NUM,
+       CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM,
+};
+
+static const struct option lgopts[] = {
+       {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
+       {CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM},
+       {CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM},
+       {CMD_LINE_OPT_IPV6, 0, 0, CMD_LINE_OPT_IPV6_NUM},
+       {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM},
+       {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
+       {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
+       {CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
+       {CMD_LINE_OPT_MODE, 1, 0, CMD_LINE_OPT_MODE_NUM},
+       {CMD_LINE_OPT_EVENTQ_SYNC, 1, 0, CMD_LINE_OPT_EVENTQ_SYNC_NUM},
+       {CMD_LINE_OPT_EVENT_ETH_RX_QUEUES, 1, 0,
+                                       CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM},
+       {NULL, 0, 0, 0}
+};
 
 /*
  * This expression is used to calculate the number of mbufs needed
@@ -478,11 +547,11 @@ parse_eth_dest(const char *optarg)
  * RTE_MAX is used to ensure that NB_MBUF never goes below a minimum
  * value of 8192
  */
-#define NB_MBUF RTE_MAX(       \
-       (nb_ports*nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT +        \
-       nb_ports*nb_lcores*MAX_PKT_BURST +                      \
-       nb_ports*n_tx_queue*RTE_TEST_TX_DESC_DEFAULT +          \
-       nb_lcores*MEMPOOL_CACHE_SIZE),                          \
+#define NB_MBUF(nports) RTE_MAX(       \
+       (nports*nb_rx_queue*nb_rxd +            \
+       nports*nb_lcores*MAX_PKT_BURST +        \
+       nports*n_tx_queue*nb_txd +              \
+       nb_lcores*MEMPOOL_CACHE_SIZE),          \
        (unsigned)8192)
 
 /* Parse the argument given in the command line of the application */
@@ -493,37 +562,15 @@ parse_args(int argc, char **argv)
        char **argvopt;
        int option_index;
        char *prgname = argv[0];
-       static struct option lgopts[] = {
-               {CMD_LINE_OPT_CONFIG, 1, 0, 0},
-               {CMD_LINE_OPT_ETH_DEST, 1, 0, 0},
-               {CMD_LINE_OPT_NO_NUMA, 0, 0, 0},
-               {CMD_LINE_OPT_IPV6, 0, 0, 0},
-               {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, 0},
-               {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, 0},
-               {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
-               {NULL, 0, 0, 0}
-       };
+       uint8_t lcore_params = 0;
+       uint8_t eventq_sched = 0;
+       uint8_t eth_rx_q = 0;
+       struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
 
        argvopt = argv;
 
        /* Error or normal output strings. */
-       const char *str1 = "L3FWD: Invalid portmask";
-       const char *str2 = "L3FWD: Promiscuous mode selected";
-       const char *str3 = "L3FWD: Exact match selected";
-       const char *str4 = "L3FWD: Longest-prefix match selected";
-       const char *str5 = "L3FWD: Invalid config";
-       const char *str6 = "L3FWD: NUMA is disabled";
-       const char *str7 = "L3FWD: IPV6 is specified";
-       const char *str8 =
-               "L3FWD: Jumbo frame is enabled - disabling simple TX path";
-       const char *str9 = "L3FWD: Invalid packet length";
-       const char *str10 = "L3FWD: Set jumbo frame max packet len to ";
-       const char *str11 = "L3FWD: Invalid hash entry number";
-       const char *str12 =
-               "L3FWD: LPM and EM are mutually exclusive, select only one";
-       const char *str13 = "L3FWD: LPM or EM none selected, default LPM on";
-
-       while ((opt = getopt_long(argc, argvopt, "p:PLE",
+       while ((opt = getopt_long(argc, argvopt, short_options,
                                lgopts, &option_index)) != EOF) {
 
                switch (opt) {
@@ -531,110 +578,106 @@ parse_args(int argc, char **argv)
                case 'p':
                        enabled_port_mask = parse_portmask(optarg);
                        if (enabled_port_mask == 0) {
-                               printf("%s\n", str1);
+                               fprintf(stderr, "Invalid portmask\n");
                                print_usage(prgname);
                                return -1;
                        }
                        break;
+
                case 'P':
-                       printf("%s\n", str2);
                        promiscuous_on = 1;
                        break;
 
                case 'E':
-                       printf("%s\n", str3);
                        l3fwd_em_on = 1;
                        break;
 
                case 'L':
-                       printf("%s\n", str4);
                        l3fwd_lpm_on = 1;
                        break;
 
                /* long options */
-               case 0:
-                       if (!strncmp(lgopts[option_index].name,
-                                       CMD_LINE_OPT_CONFIG,
-                                       sizeof(CMD_LINE_OPT_CONFIG))) {
-
-                               ret = parse_config(optarg);
-                               if (ret) {
-                                       printf("%s\n", str5);
-                                       print_usage(prgname);
-                                       return -1;
-                               }
-                       }
-
-                       if (!strncmp(lgopts[option_index].name,
-                                       CMD_LINE_OPT_ETH_DEST,
-                                       sizeof(CMD_LINE_OPT_ETH_DEST))) {
-                                       parse_eth_dest(optarg);
-                       }
-
-                       if (!strncmp(lgopts[option_index].name,
-                                       CMD_LINE_OPT_NO_NUMA,
-                                       sizeof(CMD_LINE_OPT_NO_NUMA))) {
-                               printf("%s\n", str6);
-                               numa_on = 0;
+               case CMD_LINE_OPT_CONFIG_NUM:
+                       ret = parse_config(optarg);
+                       if (ret) {
+                               fprintf(stderr, "Invalid config\n");
+                               print_usage(prgname);
+                               return -1;
                        }
+                       lcore_params = 1;
+                       break;
 
-                       if (!strncmp(lgopts[option_index].name,
-                               CMD_LINE_OPT_IPV6,
-                               sizeof(CMD_LINE_OPT_IPV6))) {
-                               printf("%sn", str7);
-                               ipv6 = 1;
-                       }
+               case CMD_LINE_OPT_ETH_DEST_NUM:
+                       parse_eth_dest(optarg);
+                       break;
 
-                       if (!strncmp(lgopts[option_index].name,
-                                       CMD_LINE_OPT_ENABLE_JUMBO,
-                                       sizeof(CMD_LINE_OPT_ENABLE_JUMBO))) {
-                               struct option lenopts = {
-                                       "max-pkt-len", required_argument, 0, 0
-                               };
-
-                               printf("%s\n", str8);
-                               port_conf.rxmode.jumbo_frame = 1;
-
-                               /*
-                                * if no max-pkt-len set, use the default
-                                * value ETHER_MAX_LEN.
-                                */
-                               if (0 == getopt_long(argc, argvopt, "",
-                                               &lenopts, &option_index)) {
-                                       ret = parse_max_pkt_len(optarg);
-                                       if ((ret < 64) ||
-                                               (ret > MAX_JUMBO_PKT_LEN)) {
-                                               printf("%s\n", str9);
-                                               print_usage(prgname);
-                                               return -1;
-                                       }
-                                       port_conf.rxmode.max_rx_pkt_len = ret;
-                               }
-                               printf("%s %u\n", str10,
-                               (unsigned int)port_conf.rxmode.max_rx_pkt_len);
-                       }
+               case CMD_LINE_OPT_NO_NUMA_NUM:
+                       numa_on = 0;
+                       break;
 
-                       if (!strncmp(lgopts[option_index].name,
-                               CMD_LINE_OPT_HASH_ENTRY_NUM,
-                               sizeof(CMD_LINE_OPT_HASH_ENTRY_NUM))) {
+               case CMD_LINE_OPT_IPV6_NUM:
+                       ipv6 = 1;
+                       break;
 
-                               ret = parse_hash_entry_number(optarg);
-                               if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
-                                       hash_entry_number = ret;
-                               } else {
-                                       printf("%s\n", str11);
+               case CMD_LINE_OPT_ENABLE_JUMBO_NUM: {
+                       const struct option lenopts = {
+                               "max-pkt-len", required_argument, 0, 0
+                       };
+
+                       port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+                       port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+
+                       /*
+                        * if no max-pkt-len set, use the default
+                        * value RTE_ETHER_MAX_LEN.
+                        */
+                       if (getopt_long(argc, argvopt, "",
+                                       &lenopts, &option_index) == 0) {
+                               ret = parse_max_pkt_len(optarg);
+                               if (ret < 64 || ret > MAX_JUMBO_PKT_LEN) {
+                                       fprintf(stderr,
+                                               "invalid maximum packet length\n");
                                        print_usage(prgname);
                                        return -1;
                                }
+                               port_conf.rxmode.max_rx_pkt_len = ret;
                        }
+                       break;
+               }
 
-                       if (!strncmp(lgopts[option_index].name,
-                                    CMD_LINE_OPT_PARSE_PTYPE,
-                                    sizeof(CMD_LINE_OPT_PARSE_PTYPE))) {
-                               printf("soft parse-ptype is enabled\n");
-                               parse_ptype = 1;
+               case CMD_LINE_OPT_HASH_ENTRY_NUM_NUM:
+                       ret = parse_hash_entry_number(optarg);
+                       if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
+                               hash_entry_number = ret;
+                       } else {
+                               fprintf(stderr, "invalid hash entry number\n");
+                               print_usage(prgname);
+                               return -1;
                        }
+                       break;
+
+               case CMD_LINE_OPT_PARSE_PTYPE_NUM:
+                       printf("soft parse-ptype is enabled\n");
+                       parse_ptype = 1;
+                       break;
+
+               case CMD_LINE_OPT_PARSE_PER_PORT_POOL:
+                       printf("per port buffer pool is enabled\n");
+                       per_port_pool = 1;
+                       break;
+
+               case CMD_LINE_OPT_MODE_NUM:
+                       parse_mode(optarg);
+                       break;
 
+               case CMD_LINE_OPT_EVENTQ_SYNC_NUM:
+                       parse_eventq_sched(optarg);
+                       eventq_sched = 1;
+                       break;
+
+               case CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM:
+                       parse_event_eth_rx_queues(optarg);
+                       eth_rx_q = 1;
                        break;
 
                default:
@@ -645,7 +688,22 @@ parse_args(int argc, char **argv)
 
        /* If both LPM and EM are selected, return error. */
        if (l3fwd_lpm_on && l3fwd_em_on) {
-               printf("%s\n", str12);
+               fprintf(stderr, "LPM and EM are mutually exclusive, select only one\n");
+               return -1;
+       }
+
+       if (evt_rsrc->enabled && lcore_params) {
+               fprintf(stderr, "lcore config is not valid when event mode is selected\n");
+               return -1;
+       }
+
+       if (!evt_rsrc->enabled && eth_rx_q) {
+               fprintf(stderr, "eth_rx_queues is valid only when event mode is selected\n");
+               return -1;
+       }
+
+       if (!evt_rsrc->enabled && eventq_sched) {
+               fprintf(stderr, "eventq_sched is valid only when event mode is selected\n");
                return -1;
        }
 
@@ -654,8 +712,8 @@ parse_args(int argc, char **argv)
         * as default match.
         */
        if (!l3fwd_lpm_on && !l3fwd_em_on) {
+               fprintf(stderr, "LPM or EM none selected, default LPM on\n");
                l3fwd_lpm_on = 1;
-               printf("%s\n", str13);
        }
 
        /*
@@ -672,20 +730,20 @@ parse_args(int argc, char **argv)
                argv[optind-1] = prgname;
 
        ret = optind-1;
-       optind = 0; /* reset getopt lib */
+       optind = 1; /* reset getopt lib */
        return ret;
 }
 
 static void
-print_ethaddr(const char *name, const struct ether_addr *eth_addr)
+print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
 {
-       char buf[ETHER_ADDR_FMT_SIZE];
-       ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+       char buf[RTE_ETHER_ADDR_FMT_SIZE];
+       rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
        printf("%s%s", name, buf);
 }
 
-static int
-init_mem(unsigned nb_mbuf)
+int
+init_mem(uint16_t portid, unsigned int nb_mbuf)
 {
        struct lcore_conf *qconf;
        int socketid;
@@ -707,13 +765,14 @@ init_mem(unsigned nb_mbuf)
                                socketid, lcore_id, NB_SOCKETS);
                }
 
-               if (pktmbuf_pool[socketid] == NULL) {
-                       snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
-                       pktmbuf_pool[socketid] =
+               if (pktmbuf_pool[portid][socketid] == NULL) {
+                       snprintf(s, sizeof(s), "mbuf_pool_%d:%d",
+                                portid, socketid);
+                       pktmbuf_pool[portid][socketid] =
                                rte_pktmbuf_pool_create(s, nb_mbuf,
                                        MEMPOOL_CACHE_SIZE, 0,
                                        RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
-                       if (pktmbuf_pool[socketid] == NULL)
+                       if (pktmbuf_pool[portid][socketid] == NULL)
                                rte_exit(EXIT_FAILURE,
                                        "Cannot init mbuf pool on socket %d\n",
                                        socketid);
@@ -721,8 +780,13 @@ init_mem(unsigned nb_mbuf)
                                printf("Allocated mbuf pool on socket %d\n",
                                        socketid);
 
-                       /* Setup either LPM or EM(f.e Hash).  */
-                       l3fwd_lkp.setup(socketid);
+                       /* Setup either LPM or EM(f.e Hash). But, only once per
+                        * available socket.
+                        */
+                       if (!lkp_per_socket[socketid]) {
+                               l3fwd_lkp.setup(socketid);
+                               lkp_per_socket[socketid] = 1;
+                       }
                }
                qconf = &lcore_conf[lcore_id];
                qconf->ipv4_lookup_struct =
@@ -735,12 +799,14 @@ init_mem(unsigned nb_mbuf)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
-       uint8_t portid, count, all_ports_up, print_flag = 0;
+       uint16_t portid;
+       uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
+       int ret;
 
        printf("\nChecking link status");
        fflush(stdout);
@@ -748,24 +814,30 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
                if (force_quit)
                        return;
                all_ports_up = 1;
-               for (portid = 0; portid < port_num; portid++) {
+               RTE_ETH_FOREACH_DEV(portid) {
                        if (force_quit)
                                return;
                        if ((port_mask & (1 << portid)) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
-                       rte_eth_link_get_nowait(portid, &link);
+                       ret = rte_eth_link_get_nowait(portid, &link);
+                       if (ret < 0) {
+                               all_ports_up = 0;
+                               if (print_flag == 1)
+                                       printf("Port %u link get failed: %s\n",
+                                               portid, rte_strerror(-ret));
+                               continue;
+                       }
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                if (link.link_status)
-                                       printf("Port %d Link Up - speed %u "
-                                               "Mbps - %s\n", (uint8_t)portid,
-                                               (unsigned)link.link_speed,
+                                       printf(
+                                       "Port%d Link Up. Speed %u Mbps -%s\n",
+                                               portid, link.link_speed,
                                (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
-                                       ("full-duplex") : ("half-duplex\n"));
+                                       ("full-duplex") : ("half-duplex"));
                                else
-                                       printf("Port %d Link Down\n",
-                                               (uint8_t)portid);
+                                       printf("Port %d Link Down\n", portid);
                                continue;
                        }
                        /* clear all_ports_up flag if any link down */
@@ -803,7 +875,7 @@ signal_handler(int signum)
 }
 
 static int
-prepare_ptype_parser(uint8_t portid, uint16_t queueid)
+prepare_ptype_parser(uint16_t portid, uint16_t queueid)
 {
        if (parse_ptype) {
                printf("Port %d: softly parse packet type info\n", portid);
@@ -824,41 +896,18 @@ prepare_ptype_parser(uint8_t portid, uint16_t queueid)
        return 0;
 }
 
-int
-main(int argc, char **argv)
+static void
+l3fwd_poll_resource_setup(void)
 {
-       struct lcore_conf *qconf;
+       uint8_t nb_rx_queue, queue, socketid;
        struct rte_eth_dev_info dev_info;
+       uint32_t n_tx_queue, nb_lcores;
        struct rte_eth_txconf *txconf;
+       struct lcore_conf *qconf;
+       uint16_t queueid, portid;
+       unsigned int nb_ports;
+       unsigned int lcore_id;
        int ret;
-       unsigned nb_ports;
-       uint16_t queueid;
-       unsigned lcore_id;
-       uint32_t n_tx_queue, nb_lcores;
-       uint8_t portid, nb_rx_queue, queue, socketid;
-
-       /* init EAL */
-       ret = rte_eal_init(argc, argv);
-       if (ret < 0)
-               rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
-       argc -= ret;
-       argv += ret;
-
-       force_quit = false;
-       signal(SIGINT, signal_handler);
-       signal(SIGTERM, signal_handler);
-
-       /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */
-       for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
-               dest_eth_addr[portid] =
-                       ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
-               *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
-       }
-
-       /* parse application arguments (after the EAL ones) */
-       ret = parse_args(argc, argv);
-       if (ret < 0)
-               rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
 
        if (check_lcore_params() < 0)
                rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
@@ -867,18 +916,17 @@ main(int argc, char **argv)
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
 
-       nb_ports = rte_eth_dev_count();
+       nb_ports = rte_eth_dev_count_avail();
 
-       if (check_port_config(nb_ports) < 0)
+       if (check_port_config() < 0)
                rte_exit(EXIT_FAILURE, "check_port_config failed\n");
 
        nb_lcores = rte_lcore_count();
 
-       /* Setup function pointers for lookup method. */
-       setup_l3fwd_lookup_tables();
-
        /* initialize all ports */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
+               struct rte_eth_conf local_port_conf = port_conf;
+
                /* skip ports that are not enabled */
                if ((enabled_port_mask & (1 << portid)) == 0) {
                        printf("\nSkipping disabled port %d\n", portid);
@@ -895,28 +943,69 @@ main(int argc, char **argv)
                        n_tx_queue = MAX_TX_QUEUE_PER_PORT;
                printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
                        nb_rx_queue, (unsigned)n_tx_queue );
+
+               ret = rte_eth_dev_info_get(portid, &dev_info);
+               if (ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                               "Error during getting device (port %u) info: %s\n",
+                               portid, strerror(-ret));
+
+               if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+                       local_port_conf.txmode.offloads |=
+                               DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+               local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
+                       dev_info.flow_type_rss_offloads;
+               if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
+                               port_conf.rx_adv_conf.rss_conf.rss_hf) {
+                       printf("Port %u modified RSS hash function based on hardware support,"
+                               "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+                               portid,
+                               port_conf.rx_adv_conf.rss_conf.rss_hf,
+                               local_port_conf.rx_adv_conf.rss_conf.rss_hf);
+               }
+
                ret = rte_eth_dev_configure(portid, nb_rx_queue,
-                                       (uint16_t)n_tx_queue, &port_conf);
+                                       (uint16_t)n_tx_queue, &local_port_conf);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE,
                                "Cannot configure device: err=%d, port=%d\n",
                                ret, portid);
 
-               rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
+               ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+                                                      &nb_txd);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Cannot adjust number of descriptors: err=%d, "
+                                "port=%d\n", ret, portid);
+
+               ret = rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Cannot get MAC address: err=%d, port=%d\n",
+                                ret, portid);
+
                print_ethaddr(" Address:", &ports_eth_addr[portid]);
                printf(", ");
                print_ethaddr("Destination:",
-                       (const struct ether_addr *)&dest_eth_addr[portid]);
+                       (const struct rte_ether_addr *)&dest_eth_addr[portid]);
                printf(", ");
 
                /*
                 * prepare src MACs for each port.
                 */
-               ether_addr_copy(&ports_eth_addr[portid],
-                       (struct ether_addr *)(val_eth + portid) + 1);
+               rte_ether_addr_copy(&ports_eth_addr[portid],
+                       (struct rte_ether_addr *)(val_eth + portid) + 1);
 
                /* init memory */
-               ret = init_mem(NB_MBUF);
+               if (!per_port_pool) {
+                       /* portid = 0; this is *not* signifying the first port,
+                        * rather, it signifies that portid is ignored.
+                        */
+                       ret = init_mem(0, NB_MBUF(nb_ports));
+               } else {
+                       ret = init_mem(portid, NB_MBUF(1));
+               }
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "init_mem failed\n");
 
@@ -935,10 +1024,8 @@ main(int argc, char **argv)
                        printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
                        fflush(stdout);
 
-                       rte_eth_dev_info_get(portid, &dev_info);
                        txconf = &dev_info.default_txconf;
-                       if (port_conf.rxmode.jumbo_frame)
-                               txconf->txq_flags = 0;
+                       txconf->offloads = local_port_conf.txmode.offloads;
                        ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
                                                     socketid, txconf);
                        if (ret < 0)
@@ -964,6 +1051,8 @@ main(int argc, char **argv)
                fflush(stdout);
                /* init RX queues */
                for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
+                       struct rte_eth_rxconf rxq_conf;
+
                        portid = qconf->rx_queue_list[queue].port_id;
                        queueid = qconf->rx_queue_list[queue].queue_id;
 
@@ -976,21 +1065,173 @@ main(int argc, char **argv)
                        printf("rxq=%d,%d,%d ", portid, queueid, socketid);
                        fflush(stdout);
 
-                       ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
-                                       socketid,
-                                       NULL,
-                                       pktmbuf_pool[socketid]);
+                       ret = rte_eth_dev_info_get(portid, &dev_info);
+                       if (ret != 0)
+                               rte_exit(EXIT_FAILURE,
+                                       "Error during getting device (port %u) info: %s\n",
+                                       portid, strerror(-ret));
+
+                       rxq_conf = dev_info.default_rxconf;
+                       rxq_conf.offloads = port_conf.rxmode.offloads;
+                       if (!per_port_pool)
+                               ret = rte_eth_rx_queue_setup(portid, queueid,
+                                               nb_rxd, socketid,
+                                               &rxq_conf,
+                                               pktmbuf_pool[0][socketid]);
+                       else
+                               ret = rte_eth_rx_queue_setup(portid, queueid,
+                                               nb_rxd, socketid,
+                                               &rxq_conf,
+                                               pktmbuf_pool[portid][socketid]);
                        if (ret < 0)
                                rte_exit(EXIT_FAILURE,
                                "rte_eth_rx_queue_setup: err=%d, port=%d\n",
                                ret, portid);
                }
        }
+}
 
-       printf("\n");
+static inline int
+l3fwd_service_enable(uint32_t service_id)
+{
+       uint8_t min_service_count = UINT8_MAX;
+       uint32_t slcore_array[RTE_MAX_LCORE];
+       unsigned int slcore = 0;
+       uint8_t service_count;
+       int32_t slcore_count;
+
+       if (!rte_service_lcore_count())
+               return -ENOENT;
+
+       slcore_count = rte_service_lcore_list(slcore_array, RTE_MAX_LCORE);
+       if (slcore_count < 0)
+               return -ENOENT;
+       /* Get the core which has least number of services running. */
+       while (slcore_count--) {
+               /* Reset default mapping */
+               if (rte_service_map_lcore_set(service_id,
+                               slcore_array[slcore_count], 0) != 0)
+                       return -ENOENT;
+               service_count = rte_service_lcore_count_services(
+                               slcore_array[slcore_count]);
+               if (service_count < min_service_count) {
+                       slcore = slcore_array[slcore_count];
+                       min_service_count = service_count;
+               }
+       }
+       if (rte_service_map_lcore_set(service_id, slcore, 1))
+               return -ENOENT;
+       rte_service_lcore_start(slcore);
+
+       return 0;
+}
+
+static void
+l3fwd_event_service_setup(void)
+{
+       struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+       struct rte_event_dev_info evdev_info;
+       uint32_t service_id, caps;
+       int ret, i;
+
+       rte_event_dev_info_get(evt_rsrc->event_d_id, &evdev_info);
+       if (!(evdev_info.event_dev_cap & RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED)) {
+               ret = rte_event_dev_service_id_get(evt_rsrc->event_d_id,
+                               &service_id);
+               if (ret != -ESRCH && ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Error in starting eventdev service\n");
+               l3fwd_service_enable(service_id);
+       }
+
+       for (i = 0; i < evt_rsrc->rx_adptr.nb_rx_adptr; i++) {
+               ret = rte_event_eth_rx_adapter_caps_get(evt_rsrc->event_d_id,
+                               evt_rsrc->rx_adptr.rx_adptr[i], &caps);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Failed to get Rx adapter[%d] caps\n",
+                                evt_rsrc->rx_adptr.rx_adptr[i]);
+               ret = rte_event_eth_rx_adapter_service_id_get(
+                               evt_rsrc->event_d_id,
+                               &service_id);
+               if (ret != -ESRCH && ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Error in starting Rx adapter[%d] service\n",
+                                evt_rsrc->rx_adptr.rx_adptr[i]);
+               l3fwd_service_enable(service_id);
+       }
+
+       for (i = 0; i < evt_rsrc->tx_adptr.nb_tx_adptr; i++) {
+               ret = rte_event_eth_tx_adapter_caps_get(evt_rsrc->event_d_id,
+                               evt_rsrc->tx_adptr.tx_adptr[i], &caps);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Failed to get Rx adapter[%d] caps\n",
+                                evt_rsrc->tx_adptr.tx_adptr[i]);
+               ret = rte_event_eth_tx_adapter_service_id_get(
+                               evt_rsrc->event_d_id,
+                               &service_id);
+               if (ret != -ESRCH && ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Error in starting Rx adapter[%d] service\n",
+                                evt_rsrc->tx_adptr.tx_adptr[i]);
+               l3fwd_service_enable(service_id);
+       }
+}
+
+int
+main(int argc, char **argv)
+{
+       struct l3fwd_event_resources *evt_rsrc;
+       struct lcore_conf *qconf;
+       uint16_t queueid, portid;
+       unsigned int lcore_id;
+       uint8_t queue;
+       int i, ret;
+
+       /* init EAL */
+       ret = rte_eal_init(argc, argv);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
+       argc -= ret;
+       argv += ret;
+
+       force_quit = false;
+       signal(SIGINT, signal_handler);
+       signal(SIGTERM, signal_handler);
+
+       /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */
+       for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+               dest_eth_addr[portid] =
+                       RTE_ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
+               *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
+       }
+
+       evt_rsrc = l3fwd_get_eventdev_rsrc();
+       /* parse application arguments (after the EAL ones) */
+       ret = parse_args(argc, argv);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
+
+       /* Setup function pointers for lookup method. */
+       setup_l3fwd_lookup_tables();
+
+       evt_rsrc->per_port_pool = per_port_pool;
+       evt_rsrc->pkt_pool = pktmbuf_pool;
+       evt_rsrc->port_mask = enabled_port_mask;
+       /* Configure eventdev parameters if user has requested */
+       if (evt_rsrc->enabled) {
+               l3fwd_event_resource_setup(&port_conf);
+               if (l3fwd_em_on)
+                       l3fwd_lkp.main_loop = evt_rsrc->ops.em_event_loop;
+               else
+                       l3fwd_lkp.main_loop = evt_rsrc->ops.lpm_event_loop;
+               l3fwd_event_service_setup();
+       } else
+               l3fwd_poll_resource_setup();
 
        /* start ports */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                if ((enabled_port_mask & (1 << portid)) == 0) {
                        continue;
                }
@@ -1007,8 +1248,13 @@ main(int argc, char **argv)
                 * to itself through 2 cross-connected  ports of the
                 * target machine.
                 */
-               if (promiscuous_on)
-                       rte_eth_promiscuous_enable(portid);
+               if (promiscuous_on) {
+                       ret = rte_eth_promiscuous_enable(portid);
+                       if (ret != 0)
+                               rte_exit(EXIT_FAILURE,
+                                       "rte_eth_promiscuous_enable: err=%s, port=%u\n",
+                                       rte_strerror(-ret), portid);
+               }
        }
 
        printf("\n");
@@ -1025,27 +1271,46 @@ main(int argc, char **argv)
                }
        }
 
-
-       check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
+       check_all_ports_link_status(enabled_port_mask);
 
        ret = 0;
        /* launch per-lcore init on every lcore */
        rte_eal_mp_remote_launch(l3fwd_lkp.main_loop, NULL, CALL_MASTER);
-       RTE_LCORE_FOREACH_SLAVE(lcore_id) {
-               if (rte_eal_wait_lcore(lcore_id) < 0) {
-                       ret = -1;
-                       break;
+       if (evt_rsrc->enabled) {
+               for (i = 0; i < evt_rsrc->rx_adptr.nb_rx_adptr; i++)
+                       rte_event_eth_rx_adapter_stop(
+                                       evt_rsrc->rx_adptr.rx_adptr[i]);
+               for (i = 0; i < evt_rsrc->tx_adptr.nb_tx_adptr; i++)
+                       rte_event_eth_tx_adapter_stop(
+                                       evt_rsrc->tx_adptr.tx_adptr[i]);
+
+               RTE_ETH_FOREACH_DEV(portid) {
+                       if ((enabled_port_mask & (1 << portid)) == 0)
+                               continue;
+                       rte_eth_dev_stop(portid);
                }
-       }
 
-       /* stop ports */
-       for (portid = 0; portid < nb_ports; portid++) {
-               if ((enabled_port_mask & (1 << portid)) == 0)
-                       continue;
-               printf("Closing port %d...", portid);
-               rte_eth_dev_stop(portid);
-               rte_eth_dev_close(portid);
-               printf(" Done\n");
+               rte_eal_mp_wait_lcore();
+               RTE_ETH_FOREACH_DEV(portid) {
+                       if ((enabled_port_mask & (1 << portid)) == 0)
+                               continue;
+                       rte_eth_dev_close(portid);
+               }
+
+               rte_event_dev_stop(evt_rsrc->event_d_id);
+               rte_event_dev_close(evt_rsrc->event_d_id);
+
+       } else {
+               rte_eal_mp_wait_lcore();
+
+               RTE_ETH_FOREACH_DEV(portid) {
+                       if ((enabled_port_mask & (1 << portid)) == 0)
+                               continue;
+                       printf("Closing port %d...", portid);
+                       rte_eth_dev_stop(portid);
+                       rte_eth_dev_close(portid);
+                       printf(" Done\n");
+               }
        }
        printf("Bye...\n");