/*-
* BSD LICENSE
- *
- * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
* are met:
- *
- * * Redistributions of source code must retain the above copyright
+ *
+ * * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
* distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
*/
#include <stdio.h>
#define RTE_LOGTYPE_LSI RTE_LOGTYPE_USER1
-#define LSI_MAX_PORTS 32
-
#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
#define MAX_PKT_BURST 32
-#define BURST_TX_DRAIN 200000ULL /* around 100us at 2 Ghz */
-
-#define SOCKET0 0
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
/*
* Configurable number of RX/TX ring descriptors
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
/* ethernet addresses of ports */
-static struct ether_addr lsi_ports_eth_addr[LSI_MAX_PORTS];
+static struct ether_addr lsi_ports_eth_addr[RTE_MAX_ETHPORTS];
/* mask of enabled ports */
static uint32_t lsi_enabled_port_mask = 0;
static unsigned int lsi_rx_queue_per_lcore = 1;
/* destination port for L2 forwarding */
-static unsigned lsi_dst_ports[LSI_MAX_PORTS] = {0};
+static unsigned lsi_dst_ports[RTE_MAX_ETHPORTS] = {0};
#define MAX_PKT_BURST 32
struct mbuf_table {
unsigned n_rx_port;
unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
unsigned tx_queue_id;
- struct mbuf_table tx_mbufs[LSI_MAX_PORTS];
+ struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
} __rte_cache_aligned;
struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
.hw_strip_crc = 0, /**< CRC stripped by hardware */
},
.txmode = {
- .mq_mode = ETH_DCB_NONE,
+ .mq_mode = ETH_MQ_TX_NONE,
},
.intr_conf = {
.lsc = 1, /**< lsc interrupt feature enabled */
uint64_t rx;
uint64_t dropped;
} __rte_cache_aligned;
-struct lsi_port_statistics port_statistics[LSI_MAX_PORTS];
+struct lsi_port_statistics port_statistics[RTE_MAX_ETHPORTS];
/* A tsc-based timer responsible for triggering statistics printout */
#define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
printf("\nPort statistics ====================================");
- for (portid = 0; portid < LSI_MAX_PORTS; portid++) {
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
/* skip ports that are not enabled */
if ((lsi_enabled_port_mask & (1 << portid)) == 0)
continue;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
struct rte_mbuf *m;
unsigned lcore_id;
- uint64_t prev_tsc = 0;
- uint64_t diff_tsc, cur_tsc, timer_tsc;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, timer_tsc;
unsigned i, j, portid, nb_rx;
struct lcore_queue_conf *qconf;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+ prev_tsc = 0;
timer_tsc = 0;
lcore_id = rte_lcore_id();
if (qconf->n_rx_port == 0) {
RTE_LOG(INFO, LSI, "lcore %u has nothing to do\n", lcore_id);
- while(1);
+ return;
}
RTE_LOG(INFO, LSI, "entering main loop on lcore %u\n", lcore_id);
* TX burst queue drain
*/
diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > BURST_TX_DRAIN)) {
+ if (unlikely(diff_tsc > drain_tsc)) {
/* this could be optimized (use queueid instead of
* portid), but it is not called so often */
- for (portid = 0; portid < LSI_MAX_PORTS; portid++) {
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
if (qconf->tx_mbufs[portid].len == 0)
continue;
lsi_send_burst(&lcore_queue_conf[lcore_id],
sizeof(struct rte_pktmbuf_pool_private),
rte_pktmbuf_pool_init, NULL,
rte_pktmbuf_init, NULL,
- SOCKET0, 0);
+ rte_socket_id(), 0);
if (lsi_pktmbuf_pool == NULL)
rte_panic("Cannot init mbuf pool\n");
- /* init driver(s) */
- if (rte_pmd_init_all() < 0)
- rte_panic("Cannot init pmd\n");
-
if (rte_eal_pci_probe() < 0)
rte_panic("Cannot probe PCI\n");
if (nb_ports == 0)
rte_panic("No Ethernet port - bye\n");
- if (nb_ports > LSI_MAX_PORTS)
- nb_ports = LSI_MAX_PORTS;
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
/*
* Each logical core is assigned a dedicated TX queue on each port.
/* init one RX queue */
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
- SOCKET0, &rx_conf,
+ rte_eth_dev_socket_id(portid), &rx_conf,
lsi_pktmbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d, port=%u\n",
/* init one TX queue logical core on each port */
fflush(stdout);
ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
- SOCKET0, &tx_conf);
+ rte_eth_dev_socket_id(portid), &tx_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d,port=%u\n",
ret, (unsigned) portid);
git.droids-corp.org / dpdk.git / blobdiff