net: add rte prefix to ether structures
[dpdk.git] / examples / qos_meter / main.c
index abe5eb8..431e84f 100644 (file)
@@ -1,34 +1,5 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation
  */
 
 #include <stdio.h>
@@ -85,11 +56,7 @@ static struct rte_eth_conf port_conf = {
                .mq_mode        = ETH_MQ_RX_RSS,
                .max_rx_pkt_len = ETHER_MAX_LEN,
                .split_hdr_size = 0,
-               .header_split   = 0,
-               .hw_ip_checksum = 1,
-               .hw_vlan_filter = 0,
-               .jumbo_frame    = 0,
-               .hw_strip_crc   = 0,
+               .offloads = DEV_RX_OFFLOAD_CHECKSUM,
        },
        .rx_adv_conf = {
                .rss_conf = {
@@ -102,8 +69,8 @@ static struct rte_eth_conf port_conf = {
        },
 };
 
-#define NIC_RX_QUEUE_DESC               128
-#define NIC_TX_QUEUE_DESC               512
+#define NIC_RX_QUEUE_DESC               1024
+#define NIC_TX_QUEUE_DESC               1024
 
 #define NIC_RX_QUEUE                    0
 #define NIC_TX_QUEUE                    0
@@ -116,19 +83,28 @@ static struct rte_eth_conf port_conf = {
 #define PKT_TX_BURST_MAX                32
 #define TIME_TX_DRAIN                   200000ULL
 
-static uint8_t port_rx;
-static uint8_t port_tx;
+static uint16_t port_rx;
+static uint16_t port_tx;
 static struct rte_mbuf *pkts_rx[PKT_RX_BURST_MAX];
 struct rte_eth_dev_tx_buffer *tx_buffer;
 
-struct rte_meter_srtcm_params app_srtcm_params[] = {
-       {.cir = 1000000 * 46,  .cbs = 2048, .ebs = 2048},
+struct rte_meter_srtcm_params app_srtcm_params = {
+       .cir = 1000000 * 46,
+       .cbs = 2048,
+       .ebs = 2048
 };
 
-struct rte_meter_trtcm_params app_trtcm_params[] = {
-       {.cir = 1000000 * 46,  .pir = 1500000 * 46,  .cbs = 2048, .pbs = 2048},
+struct rte_meter_srtcm_profile app_srtcm_profile;
+
+struct rte_meter_trtcm_params app_trtcm_params = {
+       .cir = 1000000 * 46,
+       .pir = 1500000 * 46,
+       .cbs = 2048,
+       .pbs = 2048
 };
 
+struct rte_meter_trtcm_profile app_trtcm_profile;
+
 #define APP_FLOWS_MAX  256
 
 FLOW_METER app_flows[APP_FLOWS_MAX];
@@ -136,12 +112,21 @@ FLOW_METER app_flows[APP_FLOWS_MAX];
 static int
 app_configure_flow_table(void)
 {
-       uint32_t i, j;
+       uint32_t i;
        int ret;
 
-       for (i = 0, j = 0; i < APP_FLOWS_MAX;
-                       i ++, j = (j + 1) % RTE_DIM(PARAMS)) {
-               ret = FUNC_CONFIG(&app_flows[i], &PARAMS[j]);
+       ret = rte_meter_srtcm_profile_config(&app_srtcm_profile,
+               &app_srtcm_params);
+       if (ret)
+               return ret;
+
+       ret = rte_meter_trtcm_profile_config(&app_trtcm_profile,
+               &app_trtcm_params);
+       if (ret)
+               return ret;
+
+       for (i = 0; i < APP_FLOWS_MAX; i++) {
+               ret = FUNC_CONFIG(&app_flows[i], &PROFILE);
                if (ret)
                        return ret;
        }
@@ -160,13 +145,17 @@ app_pkt_handle(struct rte_mbuf *pkt, uint64_t time)
 {
        uint8_t input_color, output_color;
        uint8_t *pkt_data = rte_pktmbuf_mtod(pkt, uint8_t *);
-       uint32_t pkt_len = rte_pktmbuf_pkt_len(pkt) - sizeof(struct ether_hdr);
+       uint32_t pkt_len = rte_pktmbuf_pkt_len(pkt) -
+               sizeof(struct rte_ether_hdr);
        uint8_t flow_id = (uint8_t)(pkt_data[APP_PKT_FLOW_POS] & (APP_FLOWS_MAX - 1));
        input_color = pkt_data[APP_PKT_COLOR_POS];
        enum policer_action action;
 
        /* color input is not used for blind modes */
-       output_color = (uint8_t) FUNC_METER(&app_flows[flow_id], time, pkt_len,
+       output_color = (uint8_t) FUNC_METER(&app_flows[flow_id],
+               &PROFILE,
+               time,
+               pkt_len,
                (enum rte_meter_color) input_color);
 
        /* Apply policing and set the output color */
@@ -308,6 +297,12 @@ int
 main(int argc, char **argv)
 {
        uint32_t lcore_id;
+       uint16_t nb_rxd = NIC_RX_QUEUE_DESC;
+       uint16_t nb_txd = NIC_TX_QUEUE_DESC;
+       struct rte_eth_conf conf;
+       struct rte_eth_rxconf rxq_conf;
+       struct rte_eth_txconf txq_conf;
+       struct rte_eth_dev_info dev_info;
        int ret;
 
        /* EAL init */
@@ -333,33 +328,83 @@ main(int argc, char **argv)
                rte_exit(EXIT_FAILURE, "Buffer pool creation error\n");
 
        /* NIC init */
-       ret = rte_eth_dev_configure(port_rx, 1, 1, &port_conf);
+       conf = port_conf;
+       rte_eth_dev_info_get(port_rx, &dev_info);
+       if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+               conf.txmode.offloads |= DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+       conf.rx_adv_conf.rss_conf.rss_hf &= dev_info.flow_type_rss_offloads;
+       if (conf.rx_adv_conf.rss_conf.rss_hf !=
+                       port_conf.rx_adv_conf.rss_conf.rss_hf) {
+               printf("Port %u modified RSS hash function based on hardware support,"
+                       "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+                       port_rx,
+                       port_conf.rx_adv_conf.rss_conf.rss_hf,
+                       conf.rx_adv_conf.rss_conf.rss_hf);
+       }
+
+       ret = rte_eth_dev_configure(port_rx, 1, 1, &conf);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Port %d configuration error (%d)\n", port_rx, ret);
 
-       ret = rte_eth_rx_queue_setup(port_rx, NIC_RX_QUEUE, NIC_RX_QUEUE_DESC,
+       ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_rx, &nb_rxd, &nb_txd);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Port %d adjust number of descriptors error (%d)\n",
+                               port_rx, ret);
+
+       rxq_conf = dev_info.default_rxconf;
+       rxq_conf.offloads = conf.rxmode.offloads;
+       ret = rte_eth_rx_queue_setup(port_rx, NIC_RX_QUEUE, nb_rxd,
                                rte_eth_dev_socket_id(port_rx),
-                               NULL, pool);
+                               &rxq_conf, pool);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Port %d RX queue setup error (%d)\n", port_rx, ret);
 
-       ret = rte_eth_tx_queue_setup(port_rx, NIC_TX_QUEUE, NIC_TX_QUEUE_DESC,
+       txq_conf = dev_info.default_txconf;
+       txq_conf.offloads = conf.txmode.offloads;
+       ret = rte_eth_tx_queue_setup(port_rx, NIC_TX_QUEUE, nb_txd,
                                rte_eth_dev_socket_id(port_rx),
-                               NULL);
+                               &txq_conf);
        if (ret < 0)
        rte_exit(EXIT_FAILURE, "Port %d TX queue setup error (%d)\n", port_rx, ret);
 
-       ret = rte_eth_dev_configure(port_tx, 1, 1, &port_conf);
+       conf = port_conf;
+       rte_eth_dev_info_get(port_tx, &dev_info);
+       if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+               conf.txmode.offloads |= DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+       conf.rx_adv_conf.rss_conf.rss_hf &= dev_info.flow_type_rss_offloads;
+       if (conf.rx_adv_conf.rss_conf.rss_hf !=
+                       port_conf.rx_adv_conf.rss_conf.rss_hf) {
+               printf("Port %u modified RSS hash function based on hardware support,"
+                       "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+                       port_tx,
+                       port_conf.rx_adv_conf.rss_conf.rss_hf,
+                       conf.rx_adv_conf.rss_conf.rss_hf);
+       }
+
+       ret = rte_eth_dev_configure(port_tx, 1, 1, &conf);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Port %d configuration error (%d)\n", port_tx, ret);
 
-       ret = rte_eth_rx_queue_setup(port_tx, NIC_RX_QUEUE, NIC_RX_QUEUE_DESC,
+       nb_rxd = NIC_RX_QUEUE_DESC;
+       nb_txd = NIC_TX_QUEUE_DESC;
+       ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_tx, &nb_rxd, &nb_txd);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Port %d adjust number of descriptors error (%d)\n",
+                               port_tx, ret);
+
+       rxq_conf = dev_info.default_rxconf;
+       rxq_conf.offloads = conf.rxmode.offloads;
+       ret = rte_eth_rx_queue_setup(port_tx, NIC_RX_QUEUE, nb_rxd,
                                rte_eth_dev_socket_id(port_tx),
                                NULL, pool);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Port %d RX queue setup error (%d)\n", port_tx, ret);
 
-       ret = rte_eth_tx_queue_setup(port_tx, NIC_TX_QUEUE, NIC_TX_QUEUE_DESC,
+       txq_conf = dev_info.default_txconf;
+       txq_conf.offloads = conf.txmode.offloads;
+       ret = rte_eth_tx_queue_setup(port_tx, NIC_TX_QUEUE, nb_txd,
                                rte_eth_dev_socket_id(port_tx),
                                NULL);
        if (ret < 0)