static struct rte_mempool *mbuf_pool;
static int mergeable;
-/* Do vlan strip on host, enabled on default */
-static uint32_t vlan_strip = 1;
-
/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */
typedef enum {
VM2VM_DISABLED = 0,
static uint32_t enable_tso;
static int client_mode;
+static int dequeue_zero_copy;
/* Specify timeout (in useconds) between retries on RX. */
static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
/* Specify the number of retries on RX. */
static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
-/* Socket file path. Can be set by user */
-static char socket_file[PATH_MAX] = "vhost-net";
+/* Socket file paths. Can be set by user */
+static char *socket_files;
+static int nb_sockets;
/* empty vmdq configuration structure. Filled in programatically */
static struct rte_eth_conf vmdq_conf_default = {
rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+
+ /*
+ * When dequeue zero copy is enabled, guest Tx used vring will be
+ * updated only when corresponding mbuf is freed. Thus, the nb_tx_desc
+ * (tx_ring_size here) must be small enough so that the driver will
+ * hit the free threshold easily and free mbufs timely. Otherwise,
+ * guest Tx vring would be starved.
+ */
+ if (dequeue_zero_copy)
+ tx_ring_size = 64;
+
tx_rings = (uint16_t)rte_lcore_count();
retval = validate_num_devices(MAX_DEVICES);
if (port >= rte_eth_dev_count()) return -1;
- if (enable_tx_csum == 0)
- rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_CSUM);
-
- if (enable_tso == 0) {
- rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_HOST_TSO4);
- rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_HOST_TSO6);
- rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_GUEST_TSO4);
- rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_GUEST_TSO6);
- }
-
rx_rings = (uint16_t)dev_info.max_rx_queues;
/* Configure ethernet device. */
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
us_vhost_parse_socket_path(const char *q_arg)
{
/* parse number string */
-
if (strnlen(q_arg, PATH_MAX) > PATH_MAX)
return -1;
- else
- snprintf((char *)&socket_file, PATH_MAX, "%s", q_arg);
+
+ socket_files = realloc(socket_files, PATH_MAX * (nb_sockets + 1));
+ snprintf(socket_files + nb_sockets * PATH_MAX, PATH_MAX, "%s", q_arg);
+ nb_sockets++;
return 0;
}
" --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n"
" --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n"
" --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
- " --vlan-strip [0|1]: disable/enable(default) RX VLAN strip on host\n"
" --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
" --socket-file: The path of the socket file.\n"
" --tx-csum [0|1] disable/enable TX checksum offload.\n"
" --tso [0|1] disable/enable TCP segment offload.\n"
- " --client register a vhost-user socket as client mode.\n",
+ " --client register a vhost-user socket as client mode.\n"
+ " --dequeue-zero-copy enables dequeue zero copy\n",
prgname);
}
{"rx-retry-delay", required_argument, NULL, 0},
{"rx-retry-num", required_argument, NULL, 0},
{"mergeable", required_argument, NULL, 0},
- {"vlan-strip", required_argument, NULL, 0},
{"stats", required_argument, NULL, 0},
{"socket-file", required_argument, NULL, 0},
{"tx-csum", required_argument, NULL, 0},
{"tso", required_argument, NULL, 0},
{"client", no_argument, &client_mode, 1},
+ {"dequeue-zero-copy", no_argument, &dequeue_zero_copy, 1},
{NULL, 0, 0, 0},
};
vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.rx_mode =
ETH_VMDQ_ACCEPT_BROADCAST |
ETH_VMDQ_ACCEPT_MULTICAST;
- rte_vhost_feature_enable(1ULL << VIRTIO_NET_F_CTRL_RX);
break;
}
}
- /* Enable/disable RX VLAN strip on host. */
- if (!strncmp(long_option[option_index].name,
- "vlan-strip", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for VLAN strip [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- vlan_strip = !!ret;
- vmdq_conf_default.rxmode.hw_vlan_strip =
- vlan_strip;
- }
- }
-
/* Enable/disable stats. */
if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
ret = parse_num_opt(optarg, INT32_MAX);
"(%d) failed to add device MAC address to VMDQ\n",
vdev->vid);
- /* Enable stripping of the vlan tag as we handle routing. */
- if (vlan_strip)
- rte_eth_dev_set_vlan_strip_on_queue(ports[0],
- (uint16_t)vdev->vmdq_rx_q, 1);
+ rte_eth_dev_set_vlan_strip_on_queue(ports[0], vdev->vmdq_rx_q, 1);
/* Set device as ready for RX. */
vdev->ready = DEVICE_RX;
return -1;
if (vdev->vid == dst_vdev->vid) {
- RTE_LOG(DEBUG, VHOST_DATA,
+ RTE_LOG_DP(DEBUG, VHOST_DATA,
"(%d) TX: src and dst MAC is same. Dropping packet.\n",
vdev->vid);
return 0;
}
- RTE_LOG(DEBUG, VHOST_DATA,
+ RTE_LOG_DP(DEBUG, VHOST_DATA,
"(%d) TX: MAC address is local\n", dst_vdev->vid);
if (unlikely(dst_vdev->remove)) {
- RTE_LOG(DEBUG, VHOST_DATA,
+ RTE_LOG_DP(DEBUG, VHOST_DATA,
"(%d) device is marked for removal\n", dst_vdev->vid);
return 0;
}
return 0;
if (vdev->vid == dst_vdev->vid) {
- RTE_LOG(DEBUG, VHOST_DATA,
+ RTE_LOG_DP(DEBUG, VHOST_DATA,
"(%d) TX: src and dst MAC is same. Dropping packet.\n",
vdev->vid);
return -1;
*offset = VLAN_HLEN;
*vlan_tag = vlan_tags[vdev->vid];
- RTE_LOG(DEBUG, VHOST_DATA,
+ RTE_LOG_DP(DEBUG, VHOST_DATA,
"(%d) TX: pkt to local VM device id: (%d), vlan tag: %u.\n",
vdev->vid, dst_vdev->vid, *vlan_tag);
}
}
- RTE_LOG(DEBUG, VHOST_DATA,
+ RTE_LOG_DP(DEBUG, VHOST_DATA,
"(%d) TX: MAC address is external\n", vdev->vid);
queue2nic:
if (unlikely(cur_tsc - prev_tsc > MBUF_TABLE_DRAIN_TSC)) {
prev_tsc = cur_tsc;
- RTE_LOG(DEBUG, VHOST_DATA,
+ RTE_LOG_DP(DEBUG, VHOST_DATA,
"TX queue drained after timeout with burst size %u\n",
tx_q->len);
do_drain_mbuf_table(tx_q);
* These callback allow devices to be added to the data core when configuration
* has been fully complete.
*/
-static const struct virtio_net_device_ops virtio_net_device_ops =
+static const struct vhost_device_ops virtio_net_device_ops =
{
.new_device = new_device,
.destroy_device = destroy_device,
}
}
+static void
+unregister_drivers(int socket_num)
+{
+ int i, ret;
+
+ for (i = 0; i < socket_num; i++) {
+ ret = rte_vhost_driver_unregister(socket_files + i * PATH_MAX);
+ if (ret != 0)
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "Fail to unregister vhost driver for %s.\n",
+ socket_files + i * PATH_MAX);
+ }
+}
+
/* When we receive a INT signal, unregister vhost driver */
static void
sigint_handler(__rte_unused int signum)
{
/* Unregister vhost driver. */
- int ret = rte_vhost_driver_unregister((char *)&socket_file);
- if (ret != 0)
- rte_exit(EXIT_FAILURE, "vhost driver unregister failure.\n");
+ unregister_drivers(nb_sockets);
+
exit(0);
}
mtu = 64 * 1024;
nr_mbufs_per_core = (mtu + mbuf_size) * MAX_PKT_BURST /
- (mbuf_size - RTE_PKTMBUF_HEADROOM) * MAX_PKT_BURST;
+ (mbuf_size - RTE_PKTMBUF_HEADROOM);
nr_mbufs_per_core += nr_rx_desc;
nr_mbufs_per_core = RTE_MAX(nr_mbufs_per_core, nr_mbuf_cache);
}
/*
- * Main function, does initialisation and calls the per-lcore functions. The CUSE
- * device is also registered here to handle the IOCTLs.
+ * Main function, does initialisation and calls the per-lcore functions.
*/
int
main(int argc, char *argv[])
{
unsigned lcore_id, core_id = 0;
unsigned nb_ports, valid_num_ports;
- int ret;
+ int ret, i;
uint8_t portid;
static pthread_t tid;
char thread_name[RTE_MAX_THREAD_NAME_LEN];
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid argument\n");
- for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
TAILQ_INIT(&lcore_info[lcore_id].vdev_list);
if (rte_lcore_is_enabled(lcore_id))
- lcore_ids[core_id ++] = lcore_id;
+ lcore_ids[core_id++] = lcore_id;
+ }
if (rte_lcore_count() > RTE_MAX_LCORE)
rte_exit(EXIT_FAILURE,"Not enough cores\n");
RTE_LCORE_FOREACH_SLAVE(lcore_id)
rte_eal_remote_launch(switch_worker, NULL, lcore_id);
- if (mergeable == 0)
- rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF);
-
if (client_mode)
flags |= RTE_VHOST_USER_CLIENT;
+ if (dequeue_zero_copy)
+ flags |= RTE_VHOST_USER_DEQUEUE_ZERO_COPY;
+
/* Register vhost user driver to handle vhost messages. */
- ret = rte_vhost_driver_register(socket_file, flags);
- if (ret != 0)
- rte_exit(EXIT_FAILURE, "vhost driver register failure.\n");
+ for (i = 0; i < nb_sockets; i++) {
+ char *file = socket_files + i * PATH_MAX;
+ ret = rte_vhost_driver_register(file, flags);
+ if (ret != 0) {
+ unregister_drivers(i);
+ rte_exit(EXIT_FAILURE,
+ "vhost driver register failure.\n");
+ }
+ if (mergeable == 0) {
+ rte_vhost_driver_disable_features(file,
+ 1ULL << VIRTIO_NET_F_MRG_RXBUF);
+ }
+
+ if (enable_tx_csum == 0) {
+ rte_vhost_driver_disable_features(file,
+ 1ULL << VIRTIO_NET_F_CSUM);
+ }
- rte_vhost_driver_callback_register(&virtio_net_device_ops);
+ if (enable_tso == 0) {
+ rte_vhost_driver_disable_features(file,
+ 1ULL << VIRTIO_NET_F_HOST_TSO4);
+ rte_vhost_driver_disable_features(file,
+ 1ULL << VIRTIO_NET_F_HOST_TSO6);
+ rte_vhost_driver_disable_features(file,
+ 1ULL << VIRTIO_NET_F_GUEST_TSO4);
+ rte_vhost_driver_disable_features(file,
+ 1ULL << VIRTIO_NET_F_GUEST_TSO6);
+ }
+
+ if (promiscuous) {
+ rte_vhost_driver_enable_features(file,
+ 1ULL << VIRTIO_NET_F_CTRL_RX);
+ }
+
+ ret = rte_vhost_driver_callback_register(file,
+ &virtio_net_device_ops);
+ if (ret != 0) {
+ rte_exit(EXIT_FAILURE,
+ "failed to register vhost driver callbacks.\n");
+ }
+
+ if (rte_vhost_driver_start(file) < 0) {
+ rte_exit(EXIT_FAILURE,
+ "failed to start vhost driver.\n");
+ }
+ }
+
+ RTE_LCORE_FOREACH_SLAVE(lcore_id)
+ rte_eal_wait_lcore(lcore_id);
- /* Start CUSE session. */
- rte_vhost_driver_session_start();
return 0;
}
git.droids-corp.org / dpdk.git / blobdiff