RTE_CRYPTO_CIPHER_AES_CBC,
/**< AES algorithm in CBC mode */
- RTE_CRYPTO_CIPHER_AES_CCM,
- /**< AES algorithm in CCM mode. When this cipher algorithm is used the
- * *RTE_CRYPTO_AUTH_AES_CCM* element of the
- * *rte_crypto_hash_algorithm* enum MUST be used to set up the related
- * *rte_crypto_auth_xform* structure in the session context or in
- * the op_params of the crypto operation structure in the case of a
- * session-less crypto operation
- */
RTE_CRYPTO_CIPHER_AES_CTR,
/**< AES algorithm in Counter mode */
RTE_CRYPTO_CIPHER_AES_ECB,
/**< AES algorithm in ECB mode */
RTE_CRYPTO_CIPHER_AES_F8,
/**< AES algorithm in F8 mode */
- RTE_CRYPTO_CIPHER_AES_GCM,
- /**< AES algorithm in GCM mode. When this cipher algorithm is used the
- * *RTE_CRYPTO_AUTH_AES_GCM* element of the *rte_crypto_auth_algorithm*
- * enum MUST be used to set up the related *rte_crypto_auth_setup_data*
- * structure in the session context or in the op_params of the crypto
- * operation structure in the case of a session-less crypto operation.
- */
RTE_CRYPTO_CIPHER_AES_XTS,
/**< AES algorithm in XTS mode */
RTE_CRYPTO_AUTH_AES_CBC_MAC,
/**< AES-CBC-MAC algorithm. Only 128-bit keys are supported. */
- RTE_CRYPTO_AUTH_AES_CCM,
- /**< AES algorithm in CCM mode. This is an authenticated cipher. When
- * this hash algorithm is used, the *RTE_CRYPTO_CIPHER_AES_CCM*
- * element of the *rte_crypto_cipher_algorithm* enum MUST be used to
- * set up the related rte_crypto_cipher_setup_data structure in the
- * session context or the corresponding parameter in the crypto
- * operation data structures op_params parameter MUST be set for a
- * session-less crypto operation.
- */
RTE_CRYPTO_AUTH_AES_CMAC,
/**< AES CMAC algorithm. */
- RTE_CRYPTO_AUTH_AES_GCM,
- /**< AES algorithm in GCM mode. When this hash algorithm
- * is used, the RTE_CRYPTO_CIPHER_AES_GCM element of the
- * rte_crypto_cipher_algorithm enum MUST be used to set up the related
- * rte_crypto_cipher_setup_data structure in the session context, or
- * the corresponding parameter in the crypto operation data structures
- * op_params parameter MUST be set for a session-less crypto operation.
- */
RTE_CRYPTO_AUTH_AES_GMAC,
/**< AES GMAC algorithm. */
RTE_CRYPTO_AUTH_AES_XCBC_MAC,
* The maximum permitted value is 65535 (2^16 - 1) bytes, unless
* otherwise specified below.
*
- * This field must be specified when the hash algorithm is one of the
- * following:
- *
- * - For GCM (@ref RTE_CRYPTO_AUTH_AES_GCM). In this case, this is
- * the length of the Additional Authenticated Data (called A, in NIST
- * SP800-38D).
- *
- * - For CCM (@ref RTE_CRYPTO_AUTH_AES_CCM). In this case, this is
- * the length of the associated data (called A, in NIST SP800-38C).
- * Note that this does NOT include the length of any padding, or the
- * 18 bytes reserved at the start of the above field to store the
- * block B0 and the encoded length. The maximum permitted value in
- * this case is 222 bytes.
- *
*/
struct {
* also the same as the result length.
*
* @note
- * In the case of CCM
- * @ref RTE_CRYPTO_AUTH_AES_CCM, this value
- * should not include the length of the padding
- * or the length of the MAC; the driver will
- * compute the actual number of bytes over
- * which the encryption will occur, which will
- * include these values.
- *
- * @note
* For SNOW 3G @ RTE_CRYPTO_AUTH_SNOW3G_UEA2,
* KASUMI @ RTE_CRYPTO_CIPHER_KASUMI_F8
* and ZUC @ RTE_CRYPTO_CIPHER_ZUC_EEA3,
* packet in source buffer.
*
* @note
- * For CCM and GCM modes of operation,
- * this field is ignored.
- * The field @ref aad field should be set
- * instead.
- *
- * @note
* For SNOW 3G @ RTE_CRYPTO_AUTH_SNOW3G_UIA2,
* KASUMI @ RTE_CRYPTO_AUTH_KASUMI_F9
* and ZUC @ RTE_CRYPTO_AUTH_ZUC_EIA3,
* buffer that the hash will be computed on.
*
* @note
- * For CCM and GCM modes of operation,
- * this field is ignored. The field @ref aad
- * field should be set instead.
- *
- * @note
* For SNOW 3G @ RTE_CRYPTO_AUTH_SNOW3G_UIA2,
* KASUMI @ RTE_CRYPTO_AUTH_KASUMI_F9
* and ZUC @ RTE_CRYPTO_AUTH_ZUC_EIA3,
* For digest generation, the digest result
* will overwrite any data at this location.
*
- * @note
- * For GCM (@ref RTE_CRYPTO_AUTH_AES_GCM), for
- * "digest result" read "authentication tag T".
*/
phys_addr_t phys_addr;
/**< Physical address of digest */
* This length must not exceed 65535 (2^16-1)
* bytes.
*
- * Specifically for CCM
- * (@ref RTE_CRYPTO_AUTH_AES_CCM),
- * the caller should setup this field as follows:
- *
- * - the nonce should be written starting at
- * an offset of one byte into the array,
- * leaving room for the implementation to
- * write in the flags to the first byte.
- *
- * - the additional authentication data
- * itself should be written starting at
- * an offset of 18 bytes into the array,
- * leaving room for the length encoding in
- * the first two bytes of the second block.
- *
- * - the array should be big enough to hold
- * the above fields, plus any padding to
- * round this up to the nearest multiple of
- * the block size (16 bytes).
- * Padding will be added by the implementation.
- *
- * Finally, for GCM
- * (@ref RTE_CRYPTO_AUTH_AES_GCM), the
- * caller should setup this field as follows:
- *
- * - the AAD is written in starting at byte 0
- * - the array must be big enough to hold
- * the AAD, plus any space to round this up to
- * the nearest multiple of the block size
- * (16 bytes).
- *
*/
phys_addr_t phys_addr; /**< physical address */
} aad;
git.droids-corp.org / dpdk.git / blobdiff