-/*-
- *
- * Copyright(c) 2015-2017 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2017 Intel Corporation.
*/
#ifndef _RTE_CRYPTODEV_H_
#include "rte_crypto.h"
#include "rte_dev.h"
#include <rte_common.h>
+#include <rte_config.h>
extern const char **rte_cyptodev_names;
RTE_FMT(RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
RTE_FMT_TAIL(__VA_ARGS__,)))
-#ifdef RTE_LIBRTE_CRYPTODEV_DEBUG
#define CDEV_LOG_DEBUG(...) \
RTE_LOG(DEBUG, CRYPTODEV, \
RTE_FMT("%s() line %u: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
RTE_FMT("[%s] %s: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
dev, __func__, RTE_FMT_TAIL(__VA_ARGS__,)))
-#else
-#define CDEV_LOG_DEBUG(...) (void)0
-#define CDEV_PMD_TRACE(...) (void)0
-#endif
-
-
-
/**
* A macro that points to an offset from the start
* of the crypto operation structure (rte_crypto_op)
* to calculate address from.
*/
#define rte_crypto_op_ctophys_offset(c, o) \
- (phys_addr_t)((c)->phys_addr + (o))
+ (rte_iova_t)((c)->phys_addr + (o))
/**
* Crypto parameters range description
};
};
+/**
+ * Asymmetric Xform Crypto Capability
+ *
+ */
+struct rte_cryptodev_asymmetric_xform_capability {
+ enum rte_crypto_asym_xform_type xform_type;
+ /**< Transform type: RSA/MODEXP/DH/DSA/MODINV */
+
+ uint32_t op_types;
+ /**< bitmask for supported rte_crypto_asym_op_type */
+
+ __extension__
+ union {
+ struct rte_crypto_param_range modlen;
+ /**< Range of modulus length supported by modulus based xform.
+ * Value 0 mean implementation default
+ */
+ };
+};
+
+/**
+ * Asymmetric Crypto Capability
+ *
+ */
+struct rte_cryptodev_asymmetric_capability {
+ struct rte_cryptodev_asymmetric_xform_capability xform_capa;
+};
+
+
/** Structure used to capture a capability of a crypto device */
struct rte_cryptodev_capabilities {
enum rte_crypto_op_type op;
union {
struct rte_cryptodev_symmetric_capability sym;
/**< Symmetric operation capability parameters */
+ struct rte_cryptodev_asymmetric_capability asym;
+ /**< Asymmetric operation capability parameters */
};
};
};
/**
- * Provide capabilities available for defined device and algorithm
+ * Structure used to describe asymmetric crypto xforms
+ * Each xform maps to one asym algorithm.
+ *
+ */
+struct rte_cryptodev_asym_capability_idx {
+ enum rte_crypto_asym_xform_type type;
+ /**< Asymmetric xform (algo) type */
+};
+
+/**
+ * Provide capabilities available for defined device and algorithm
*
* @param dev_id The identifier of the device.
* @param idx Description of crypto algorithms.
rte_cryptodev_sym_capability_get(uint8_t dev_id,
const struct rte_cryptodev_sym_capability_idx *idx);
+/**
+ * Provide capabilities available for defined device and xform
+ *
+ * @param dev_id The identifier of the device.
+ * @param idx Description of asym crypto xform.
+ *
+ * @return
+ * - Return description of the asymmetric crypto capability if exist.
+ * - Return NULL if the capability not exist.
+ */
+__rte_experimental
+const struct rte_cryptodev_asymmetric_xform_capability *
+rte_cryptodev_asym_capability_get(uint8_t dev_id,
+ const struct rte_cryptodev_asym_capability_idx *idx);
+
/**
* Check if key size and initial vector are supported
* in crypto cipher capability
uint16_t key_size, uint16_t digest_size, uint16_t aad_size,
uint16_t iv_size);
+/**
+ * Check if op type is supported
+ *
+ * @param capability Description of the asymmetric crypto capability.
+ * @param op_type op type
+ *
+ * @return
+ * - Return 1 if the op type is supported
+ * - Return 0 if unsupported
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_xform_capability_check_optype(
+ const struct rte_cryptodev_asymmetric_xform_capability *capability,
+ enum rte_crypto_asym_op_type op_type);
+
+/**
+ * Check if modulus length is in supported range
+ *
+ * @param capability Description of the asymmetric crypto capability.
+ * @param modlen modulus length.
+ *
+ * @return
+ * - Return 0 if the parameters are in range of the capability.
+ * - Return -1 if the parameters are out of range of the capability.
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_xform_capability_check_modlen(
+ const struct rte_cryptodev_asymmetric_xform_capability *capability,
+ uint16_t modlen);
+
/**
* Provide the cipher algorithm enum, given an algorithm string
*
rte_cryptodev_get_aead_algo_enum(enum rte_crypto_aead_algorithm *algo_enum,
const char *algo_string);
+/**
+ * Provide the Asymmetric xform enum, given an xform string
+ *
+ * @param xform_enum A pointer to the xform type
+ * enum to be filled
+ * @param xform_string xform string
+ *
+ * @return
+ * - Return -1 if string is not valid
+ * - Return 0 if the string is valid
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_get_xform_enum(enum rte_crypto_asym_xform_type *xform_enum,
+ const char *xform_string);
+
+
/** Macro used at end of crypto PMD list */
#define RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() \
{ RTE_CRYPTO_OP_TYPE_UNDEFINED }
*
* Keep these flags synchronised with rte_cryptodev_get_feature_name()
*/
-#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
+#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
/**< Symmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
+#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
/**< Asymmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
+#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
/**< Chaining symmetric crypto operations are supported */
-#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
+#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
/**< Utilises CPU SIMD SSE instructions */
-#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
+#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
/**< Utilises CPU SIMD AVX instructions */
-#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
+#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
/**< Utilises CPU SIMD AVX2 instructions */
-#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
+#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
/**< Utilises CPU AES-NI instructions */
-#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
-/**< Operations are off-loaded to an external hardware accelerator */
-#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8)
+#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
+/**< Operations are off-loaded to an
+ * external hardware accelerator
+ */
+#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8)
/**< Utilises CPU SIMD AVX512 instructions */
-#define RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER (1ULL << 9)
-/**< Scatter-gather mbufs are supported */
-#define RTE_CRYPTODEV_FF_CPU_NEON (1ULL << 10)
+#define RTE_CRYPTODEV_FF_IN_PLACE_SGL (1ULL << 9)
+/**< In-place Scatter-gather (SGL) buffers, with multiple segments,
+ * are supported
+ */
+#define RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT (1ULL << 10)
+/**< Out-of-place Scatter-gather (SGL) buffers are
+ * supported in input and output
+ */
+#define RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT (1ULL << 11)
+/**< Out-of-place Scatter-gather (SGL) buffers are supported
+ * in input, combined with linear buffers (LB), with a
+ * single segment in output
+ */
+#define RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT (1ULL << 12)
+/**< Out-of-place Scatter-gather (SGL) buffers are supported
+ * in output, combined with linear buffers (LB) in input
+ */
+#define RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT (1ULL << 13)
+/**< Out-of-place linear buffers (LB) are supported in input and output */
+#define RTE_CRYPTODEV_FF_CPU_NEON (1ULL << 14)
/**< Utilises CPU NEON instructions */
-#define RTE_CRYPTODEV_FF_CPU_ARM_CE (1ULL << 11)
+#define RTE_CRYPTODEV_FF_CPU_ARM_CE (1ULL << 15)
/**< Utilises ARM CPU Cryptographic Extensions */
+#define RTE_CRYPTODEV_FF_SECURITY (1ULL << 16)
+/**< Support Security Protocol Processing */
+#define RTE_CRYPTODEV_FF_RSA_PRIV_OP_KEY_EXP (1ULL << 17)
+/**< Support RSA Private Key OP with exponent */
+#define RTE_CRYPTODEV_FF_RSA_PRIV_OP_KEY_QT (1ULL << 18)
+/**< Support RSA Private Key OP with CRT (quintuple) Keys */
/**
/** Crypto device information */
struct rte_cryptodev_info {
- const char *driver_name; /**< Driver name. */
- uint8_t driver_id; /**< Driver identifier */
- struct rte_pci_device *pci_dev; /**< PCI information. */
+ const char *driver_name; /**< Driver name. */
+ uint8_t driver_id; /**< Driver identifier */
+ struct rte_device *device; /**< Generic device information. */
- uint64_t feature_flags; /**< Feature flags */
+ uint64_t feature_flags;
+ /**< Feature flags exposes HW/SW features for the given device */
const struct rte_cryptodev_capabilities *capabilities;
/**< Array of devices supported capabilities */
unsigned max_nb_queue_pairs;
/**< Maximum number of queues pairs supported by device. */
+ uint16_t min_mbuf_headroom_req;
+ /**< Minimum mbuf headroom required by device */
+
+ uint16_t min_mbuf_tailroom_req;
+ /**< Minimum mbuf tailroom required by device */
+
struct {
unsigned max_nb_sessions;
- /**< Maximum number of sessions supported by device. */
- unsigned int max_nb_sessions_per_qp;
- /**< Maximum number of sessions per queue pair.
- * Default 0 for infinite sessions
+ /**< Maximum number of sessions supported by device.
+ * If 0, the device does not have any limitation in
+ * number of sessions that can be used.
*/
} sym;
};
/** Crypto device queue pair configuration structure. */
struct rte_cryptodev_qp_conf {
uint32_t nb_descriptors; /**< Number of descriptors per queue pair */
+ struct rte_mempool *mp_session;
+ /**< The mempool for creating session in sessionless mode */
+ struct rte_mempool *mp_session_private;
+ /**< The mempool for creating sess private data in sessionless mode */
};
/**
#define RTE_CRYPTODEV_NAME_MAX_LEN (64)
/**< Max length of name of crypto PMD */
-/**
- * @deprecated
- *
- * Create a virtual crypto device
- *
- * @param name Cryptodev PMD name of device to be created.
- * @param args Options arguments for device.
- *
- * @return
- * - On successful creation of the cryptodev the device index is returned,
- * which will be between 0 and rte_cryptodev_count().
- * - In the case of a failure, returns -1.
- */
-__rte_deprecated
-extern int
-rte_cryptodev_create_vdev(const char *name, const char *args);
-
/**
* Get the device identifier for the named crypto device.
*
int socket_id; /**< Socket to allocate resources on */
uint16_t nb_queue_pairs;
/**< Number of queue pairs to configure on device */
+ uint64_t ff_disable;
+ /**< Feature flags to be disabled. Only the following features are
+ * allowed to be disabled,
+ * - RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO
+ * - RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO
+ * - RTE_CRYTPODEV_FF_SECURITY
+ */
};
/**
* - 1] previously supplied to
* rte_cryptodev_configure().
* @param qp_conf The pointer to the configuration data to be
- * used for the queue pair. NULL value is
- * allowed, in which case default configuration
- * will be used.
+ * used for the queue pair.
* @param socket_id The *socket_id* argument is the socket
* identifier in case of NUMA. The value can be
* *SOCKET_ID_ANY* if there is no NUMA constraint
* for the DMA memory allocated for the receive
* queue pair.
- * @param session_pool Pointer to device session mempool, used
- * for session-less operations.
*
* @return
* - 0: Success, queue pair correctly set up.
*/
extern int
rte_cryptodev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
- const struct rte_cryptodev_qp_conf *qp_conf, int socket_id,
- struct rte_mempool *session_pool);
-
-/**
- * Start a specified queue pair of a device. It is used
- * when deferred_start flag of the specified queue is true.
- *
- * @param dev_id The identifier of the device
- * @param queue_pair_id The index of the queue pair to start. The value
- * must be in the range [0, nb_queue_pair - 1]
- * previously supplied to
- * rte_crypto_dev_configure().
- * @return
- * - 0: Success, the transmit queue is correctly set up.
- * - -EINVAL: The dev_id or the queue_id out of range.
- * - -ENOTSUP: The function not supported in PMD driver.
- */
-extern int
-rte_cryptodev_queue_pair_start(uint8_t dev_id, uint16_t queue_pair_id);
-
-/**
- * Stop specified queue pair of a device
- *
- * @param dev_id The identifier of the device
- * @param queue_pair_id The index of the queue pair to stop. The value
- * must be in the range [0, nb_queue_pair - 1]
- * previously supplied to
- * rte_cryptodev_configure().
- * @return
- * - 0: Success, the transmit queue is correctly set up.
- * - -EINVAL: The dev_id or the queue_id out of range.
- * - -ENOTSUP: The function not supported in PMD driver.
- */
-extern int
-rte_cryptodev_queue_pair_stop(uint8_t dev_id, uint16_t queue_pair_id);
+ const struct rte_cryptodev_qp_conf *qp_conf, int socket_id);
/**
* Get the number of queue pairs on a specific crypto device
struct rte_cryptodev_ops *dev_ops;
/**< Functions exported by PMD */
uint64_t feature_flags;
- /**< Supported features */
+ /**< Feature flags exposes HW/SW features for the given device */
struct rte_device *device;
/**< Backing device */
struct rte_cryptodev_cb_list link_intr_cbs;
/**< User application callback for interrupts if present */
+ void *security_ctx;
+ /**< Context for security ops */
+
__extension__
uint8_t attached : 1;
/**< Flag indicating the device is attached */
} __rte_cache_aligned;
+void *
+rte_cryptodev_get_sec_ctx(uint8_t dev_id);
+
/**
*
* The data part, with no function pointers, associated with each device.
}
-/** Cryptodev symmetric crypto session */
+/** Cryptodev symmetric crypto session
+ * Each session is derived from a fixed xform chain. Therefore each session
+ * has a fixed algo, key, op-type, digest_len etc.
+ */
struct rte_cryptodev_sym_session {
+ uint64_t opaque_data;
+ /**< Can be used for external metadata */
+ uint16_t nb_drivers;
+ /**< number of elements in sess_data array */
+ uint16_t user_data_sz;
+ /**< session user data will be placed after sess_data */
+ __extension__ struct {
+ void *data;
+ uint16_t refcnt;
+ } sess_data[0];
+ /**< Driver specific session material, variable size */
+};
+
+/** Cryptodev asymmetric crypto session */
+struct rte_cryptodev_asym_session {
__extension__ void *sess_private_data[0];
- /**< Private session material */
+ /**< Private asymmetric session material */
};
+/**
+ * Create a symmetric session mempool.
+ *
+ * @param name
+ * The unique mempool name.
+ * @param nb_elts
+ * The number of elements in the mempool.
+ * @param elt_size
+ * The size of the element. This value will be ignored if it is smaller than
+ * the minimum session header size required for the system. For the user who
+ * want to use the same mempool for sym session and session private data it
+ * can be the maximum value of all existing devices' private data and session
+ * header sizes.
+ * @param cache_size
+ * The number of per-lcore cache elements
+ * @param priv_size
+ * The private data size of each session.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in the case of
+ * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
+ * constraint for the reserved zone.
+ *
+ * @return
+ * - On success return size of the session
+ * - On failure returns 0
+ */
+__rte_experimental
+struct rte_mempool *
+rte_cryptodev_sym_session_pool_create(const char *name, uint32_t nb_elts,
+ uint32_t elt_size, uint32_t cache_size, uint16_t priv_size,
+ int socket_id);
/**
* Create symmetric crypto session header (generic with no private data)
struct rte_cryptodev_sym_session *
rte_cryptodev_sym_session_create(struct rte_mempool *mempool);
+/**
+ * Create asymmetric crypto session header (generic with no private data)
+ *
+ * @param mempool mempool to allocate asymmetric session
+ * objects from
+ * @return
+ * - On success return pointer to asym-session
+ * - On failure returns NULL
+ */
+__rte_experimental
+struct rte_cryptodev_asym_session *
+rte_cryptodev_asym_session_create(struct rte_mempool *mempool);
+
/**
* Frees symmetric crypto session header, after checking that all
* the device private data has been freed, returning it
int
rte_cryptodev_sym_session_free(struct rte_cryptodev_sym_session *sess);
+/**
+ * Frees asymmetric crypto session header, after checking that all
+ * the device private data has been freed, returning it
+ * to its original mempool.
+ *
+ * @param sess Session header to be freed.
+ *
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if session is NULL.
+ * - -EBUSY if not all device private data has been freed.
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_session_free(struct rte_cryptodev_asym_session *sess);
+
/**
* Fill out private data for the device id, based on its device type.
*
* @return
* - On success, zero.
* - -EINVAL if input parameters are invalid.
- * - -ENOTSUP if crypto device does not support the crypto transform.
+ * - -ENOTSUP if crypto device does not support the crypto transform or
+ * does not support symmetric operations.
* - -ENOMEM if the private session could not be allocated.
*/
int
struct rte_crypto_sym_xform *xforms,
struct rte_mempool *mempool);
+/**
+ * Initialize asymmetric session on a device with specific asymmetric xform
+ *
+ * @param dev_id ID of device that we want the session to be used on
+ * @param sess Session to be set up on a device
+ * @param xforms Asymmetric crypto transform operations to apply on flow
+ * processed with this session
+ * @param mempool Mempool to be used for internal allocation.
+ *
+ * @return
+ * - On success, zero.
+ * - -EINVAL if input parameters are invalid.
+ * - -ENOTSUP if crypto device does not support the crypto transform.
+ * - -ENOMEM if the private session could not be allocated.
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_session_init(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess,
+ struct rte_crypto_asym_xform *xforms,
+ struct rte_mempool *mempool);
+
/**
* Frees private data for the device id, based on its device type,
- * returning it to its mempool.
+ * returning it to its mempool. It is the application's responsibility
+ * to ensure that private session data is not cleared while there are
+ * still in-flight operations using it.
*
* @param dev_id ID of device that uses the session.
* @param sess Session containing the reference to the private data
* @return
* - 0 if successful.
* - -EINVAL if device is invalid or session is NULL.
+ * - -ENOTSUP if crypto device does not support symmetric operations.
*/
int
rte_cryptodev_sym_session_clear(uint8_t dev_id,
struct rte_cryptodev_sym_session *sess);
/**
- * Get the size of the header session, for all registered drivers.
+ * Frees resources held by asymmetric session during rte_cryptodev_session_init
*
+ * @param dev_id ID of device that uses the asymmetric session.
+ * @param sess Asymmetric session setup on device using
+ * rte_cryptodev_session_init
* @return
- * Size of the header session.
+ * - 0 if successful.
+ * - -EINVAL if device is invalid or session is NULL.
+ */
+__rte_experimental
+int
+rte_cryptodev_asym_session_clear(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess);
+
+/**
+ * Get the size of the header session, for all registered drivers excluding
+ * the user data size.
+ *
+ * @return
+ * Size of the symmetric header session.
*/
unsigned int
-rte_cryptodev_get_header_session_size(void);
+rte_cryptodev_sym_get_header_session_size(void);
/**
- * Get the size of the private session data for a device.
+ * Get the size of the header session from created session.
*
- * @param dev_id The device identifier.
+ * @param sess
+ * The sym cryptodev session pointer
*
* @return
- * - Size of the private data, if successful
- * - 0 if device is invalid or does not have private session
+ * - If sess is not NULL, return the size of the header session including
+ * the private data size defined within sess.
+ * - If sess is NULL, return 0.
*/
+__rte_experimental
unsigned int
-rte_cryptodev_get_private_session_size(uint8_t dev_id);
+rte_cryptodev_sym_get_existing_header_session_size(
+ struct rte_cryptodev_sym_session *sess);
/**
- * Attach queue pair with sym session.
+ * Get the size of the asymmetric session header, for all registered drivers.
*
- * @param dev_id Device to which the session will be attached.
- * @param qp_id Queue pair to which the session will be attached.
- * @param session Session pointer previously allocated by
- * *rte_cryptodev_sym_session_create*.
+ * @return
+ * Size of the asymmetric header session.
+ */
+__rte_experimental
+unsigned int
+rte_cryptodev_asym_get_header_session_size(void);
+
+/**
+ * Get the size of the private symmetric session data
+ * for a device.
+ *
+ * @param dev_id The device identifier.
*
* @return
- * - On success, zero.
- * - On failure, a negative value.
+ * - Size of the private data, if successful
+ * - 0 if device is invalid or does not have private
+ * symmetric session
*/
-int
-rte_cryptodev_queue_pair_attach_sym_session(uint8_t dev_id, uint16_t qp_id,
- struct rte_cryptodev_sym_session *session);
+unsigned int
+rte_cryptodev_sym_get_private_session_size(uint8_t dev_id);
/**
- * Detach queue pair with sym session.
+ * Get the size of the private data for asymmetric session
+ * on device
*
- * @param dev_id Device to which the session is attached.
- * @param qp_id Queue pair to which the session is attached.
- * @param session Session pointer previously allocated by
- * *rte_cryptodev_sym_session_create*.
+ * @param dev_id The device identifier.
*
* @return
- * - On success, zero.
- * - On failure, a negative value.
+ * - Size of the asymmetric private data, if successful
+ * - 0 if device is invalid or does not have private session
*/
-int
-rte_cryptodev_queue_pair_detach_sym_session(uint8_t dev_id, uint16_t qp_id,
- struct rte_cryptodev_sym_session *session);
+__rte_experimental
+unsigned int
+rte_cryptodev_asym_get_private_session_size(uint8_t dev_id);
/**
* Provide driver identifier.
*/
const char *rte_cryptodev_driver_name_get(uint8_t driver_id);
+/**
+ * Store user data in a session.
+ *
+ * @param sess Session pointer allocated by
+ * *rte_cryptodev_sym_session_create*.
+ * @param data Pointer to the user data.
+ * @param size Size of the user data.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+__rte_experimental
+int
+rte_cryptodev_sym_session_set_user_data(
+ struct rte_cryptodev_sym_session *sess,
+ void *data,
+ uint16_t size);
+
+/**
+ * Get user data stored in a session.
+ *
+ * @param sess Session pointer allocated by
+ * *rte_cryptodev_sym_session_create*.
+ *
+ * @return
+ * - On success return pointer to user data.
+ * - On failure returns NULL.
+ */
+__rte_experimental
+void *
+rte_cryptodev_sym_session_get_user_data(
+ struct rte_cryptodev_sym_session *sess);
+
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff