-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2014 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2014 6WIND S.A.
*/
#ifndef _RTE_DEV_H_
#include <stdio.h>
#include <sys/queue.h>
+#include <rte_config.h>
+#include <rte_compat.h>
#include <rte_log.h>
__attribute__((format(printf, 2, 0)))
rte_log(RTE_LOG_ERR, RTE_LOGTYPE_PMD, "%s: %s", func_name, buffer);
}
+/*
+ * Enable RTE_PMD_DEBUG_TRACE() when at least one component relying on the
+ * RTE_*_RET() macros defined below is compiled in debug mode.
+ */
+#if defined(RTE_LIBRTE_ETHDEV_DEBUG) || \
+ defined(RTE_LIBRTE_CRYPTODEV_DEBUG) || \
+ defined(RTE_LIBRTE_EVENTDEV_DEBUG)
+#define RTE_PMD_DEBUG_TRACE(...) \
+ rte_pmd_debug_trace(__func__, __VA_ARGS__)
+#else
+#define RTE_PMD_DEBUG_TRACE(...) (void)0
+#endif
+
/* Macros for checking for restricting functions to primary instance only */
#define RTE_PROC_PRIMARY_OR_ERR_RET(retval) do { \
if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
} while (0)
/**
- * A generic memory resource representation.
+ * Device driver.
*/
-struct rte_mem_resource {
- uint64_t phys_addr; /**< Physical address, 0 if not resource. */
- uint64_t len; /**< Length of the resource. */
- void *addr; /**< Virtual address, NULL when not mapped. */
+enum rte_kernel_driver {
+ RTE_KDRV_UNKNOWN = 0,
+ RTE_KDRV_IGB_UIO,
+ RTE_KDRV_VFIO,
+ RTE_KDRV_UIO_GENERIC,
+ RTE_KDRV_NIC_UIO,
+ RTE_KDRV_NONE,
};
-/** Double linked list of device drivers. */
-TAILQ_HEAD(rte_driver_list, rte_driver);
-/** Double linked list of devices. */
-TAILQ_HEAD(rte_device_list, rte_device);
-
-/* Forward declaration */
-struct rte_driver;
-
/**
- * A structure describing a generic device.
+ * Device policies.
*/
-struct rte_device {
- TAILQ_ENTRY(rte_device) next; /**< Next device */
- const char *name; /**< Device name */
- const struct rte_driver *driver;/**< Associated driver */
- int numa_node; /**< NUMA node connection */
- struct rte_devargs *devargs; /**< Device user arguments */
+enum rte_dev_policy {
+ RTE_DEV_WHITELISTED,
+ RTE_DEV_BLACKLISTED,
};
/**
- * Insert a device detected by a bus scanning.
- *
- * @param dev
- * A pointer to a rte_device structure describing the detected device.
- */
-void rte_eal_device_insert(struct rte_device *dev);
-
-/**
- * Remove a device (e.g. when being unplugged).
- *
- * @param dev
- * A pointer to a rte_device structure describing the device to be removed.
+ * A generic memory resource representation.
*/
-void rte_eal_device_remove(struct rte_device *dev);
+struct rte_mem_resource {
+ uint64_t phys_addr; /**< Physical address, 0 if not resource. */
+ uint64_t len; /**< Length of the resource. */
+ void *addr; /**< Virtual address, NULL when not mapped. */
+};
/**
* A structure describing a device driver.
const char *alias; /**< Driver alias. */
};
-/**
- * Register a device driver.
- *
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be registered.
+/*
+ * Internal identifier length
+ * Sufficiently large to allow for UUID or PCI address
*/
-void rte_eal_driver_register(struct rte_driver *driver);
+#define RTE_DEV_NAME_MAX_LEN 64
/**
- * Unregister a device driver.
- *
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be unregistered.
+ * A structure describing a generic device.
*/
-void rte_eal_driver_unregister(struct rte_driver *driver);
+struct rte_device {
+ TAILQ_ENTRY(rte_device) next; /**< Next device */
+ const char *name; /**< Device name */
+ const struct rte_driver *driver;/**< Associated driver */
+ int numa_node; /**< NUMA node connection */
+ struct rte_devargs *devargs; /**< Device user arguments */
+};
/**
- * Initialize a driver specified by name.
+ * Attach a device to a registered driver.
*
* @param name
- * The pointer to a driver name to be initialized.
- * @param args
- * The pointer to arguments used by driver initialization.
+ * The device name, that refers to a pci device (or some private
+ * way of designating a vdev device). Based on this device name, eal
+ * will identify a driver capable of handling it and pass it to the
+ * driver probing function.
+ * @param devargs
+ * Device arguments to be passed to the driver.
* @return
- * 0 on success, negative on error
+ * 0 on success, negative on error.
*/
-int rte_eal_vdev_init(const char *name, const char *args);
+int rte_eal_dev_attach(const char *name, const char *devargs);
/**
- * Uninitalize a driver specified by name.
+ * Detach a device from its driver.
*
- * @param name
- * The pointer to a driver name to be initialized.
+ * @param dev
+ * A pointer to a rte_device structure.
* @return
- * 0 on success, negative on error
+ * 0 on success, negative on error.
*/
-int rte_eal_vdev_uninit(const char *name);
+int rte_eal_dev_detach(struct rte_device *dev);
/**
- * Attach a device to a registered driver.
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
*
- * @param name
- * The device name, that refers to a pci device (or some private
- * way of designating a vdev device). Based on this device name, eal
- * will identify a driver capable of handling it and pass it to the
- * driver probing function.
+ * Hotplug add a given device to a specific bus.
+ *
+ * @param busname
+ * The bus name the device is added to.
+ * @param devname
+ * The device name. Based on this device name, eal will identify a driver
+ * capable of handling it and pass it to the driver probing function.
* @param devargs
* Device arguments to be passed to the driver.
* @return
* 0 on success, negative on error.
*/
-int rte_eal_dev_attach(const char *name, const char *devargs);
+int __rte_experimental rte_eal_hotplug_add(const char *busname, const char *devname,
+ const char *devargs);
/**
- * Detach a device from its driver.
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
*
- * @param name
- * Same description as for rte_eal_dev_attach().
- * Here, eal will call the driver detaching function.
+ * Hotplug remove a given device from a specific bus.
+ *
+ * @param busname
+ * The bus name the device is removed from.
+ * @param devname
+ * The device name being removed.
* @return
* 0 on success, negative on error.
*/
-int rte_eal_dev_detach(const char *name);
+int __rte_experimental rte_eal_hotplug_remove(const char *busname,
+ const char *devname);
+
+/**
+ * Device comparison function.
+ *
+ * This type of function is used to compare an rte_device with arbitrary
+ * data.
+ *
+ * @param dev
+ * Device handle.
+ *
+ * @param data
+ * Data to compare against. The type of this parameter is determined by
+ * the kind of comparison performed by the function.
+ *
+ * @return
+ * 0 if the device matches the data.
+ * !0 if the device does not match.
+ * <0 if ordering is possible and the device is lower than the data.
+ * >0 if ordering is possible and the device is greater than the data.
+ */
+typedef int (*rte_dev_cmp_t)(const struct rte_device *dev, const void *data);
#define RTE_PMD_EXPORT_NAME_ARRAY(n, idx) n##idx[]
}
#endif
-#endif /* _RTE_VDEV_H_ */
+#endif /* _RTE_DEV_H_ */
git.droids-corp.org / dpdk.git / blobdiff