#include <rte_config.h>
#include "rte_ether.h"
-#include "rte_eth_ctrl.h"
#include "rte_dev_info.h"
extern int rte_eth_dev_logtype;
};
/*
- * The RSS offload types are defined based on flow types which are defined
- * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload
+ * A packet can be identified by hardware as different flow types. Different
+ * NIC hardware may support different flow types.
+ * Basically, the NIC hardware identifies the flow type as deep protocol as
+ * possible, and exclusively. For example, if a packet is identified as
+ * 'RTE_ETH_FLOW_NONFRAG_IPV4_TCP', it will not be any of other flow types,
+ * though it is an actual IPV4 packet.
+ * Note that the flow types are used to define RSS offload types.
+ */
+#define RTE_ETH_FLOW_UNKNOWN 0
+#define RTE_ETH_FLOW_RAW 1
+#define RTE_ETH_FLOW_IPV4 2
+#define RTE_ETH_FLOW_FRAG_IPV4 3
+#define RTE_ETH_FLOW_NONFRAG_IPV4_TCP 4
+#define RTE_ETH_FLOW_NONFRAG_IPV4_UDP 5
+#define RTE_ETH_FLOW_NONFRAG_IPV4_SCTP 6
+#define RTE_ETH_FLOW_NONFRAG_IPV4_OTHER 7
+#define RTE_ETH_FLOW_IPV6 8
+#define RTE_ETH_FLOW_FRAG_IPV6 9
+#define RTE_ETH_FLOW_NONFRAG_IPV6_TCP 10
+#define RTE_ETH_FLOW_NONFRAG_IPV6_UDP 11
+#define RTE_ETH_FLOW_NONFRAG_IPV6_SCTP 12
+#define RTE_ETH_FLOW_NONFRAG_IPV6_OTHER 13
+#define RTE_ETH_FLOW_L2_PAYLOAD 14
+#define RTE_ETH_FLOW_IPV6_EX 15
+#define RTE_ETH_FLOW_IPV6_TCP_EX 16
+#define RTE_ETH_FLOW_IPV6_UDP_EX 17
+#define RTE_ETH_FLOW_PORT 18
+ /**< Consider device port number as a flow differentiator */
+#define RTE_ETH_FLOW_VXLAN 19 /**< VXLAN protocol based flow */
+#define RTE_ETH_FLOW_GENEVE 20 /**< GENEVE protocol based flow */
+#define RTE_ETH_FLOW_NVGRE 21 /**< NVGRE protocol based flow */
+#define RTE_ETH_FLOW_VXLAN_GPE 22 /**< VXLAN-GPE protocol based flow */
+#define RTE_ETH_FLOW_MAX 23
+
+/*
+ * The RSS offload types are defined based on flow types.
+ * Different NIC hardware may support different RSS offload
* types. The supported flow types or RSS offload types can be queried by
* rte_eth_dev_info_get().
*/
uint8_t priority; /**< VLAN User Priority. */
};
+/**
+ * Tunneled type.
+ */
+enum rte_eth_tunnel_type {
+ RTE_TUNNEL_TYPE_NONE = 0,
+ RTE_TUNNEL_TYPE_VXLAN,
+ RTE_TUNNEL_TYPE_GENEVE,
+ RTE_TUNNEL_TYPE_TEREDO,
+ RTE_TUNNEL_TYPE_NVGRE,
+ RTE_TUNNEL_TYPE_IP_IN_GRE,
+ RTE_L2_TUNNEL_TYPE_E_TAG,
+ RTE_TUNNEL_TYPE_VXLAN_GPE,
+ RTE_TUNNEL_TYPE_MAX,
+};
+
+/* Deprecated API file for rte_eth_dev_filter_* functions */
+#include "rte_eth_ctrl.h"
+
/**
* Memory space that can be configured to store Flow Director filters
* in the board memory.
/** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC
is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */
uint32_t dcb_capability_en;
- struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */
+ struct rte_fdir_conf fdir_conf; /**< FDIR configuration. DEPRECATED */
struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
};
* @return
* The total count of Ethernet devices.
*/
-uint16_t __rte_experimental rte_eth_dev_count_total(void);
+uint16_t rte_eth_dev_count_total(void);
/**
* Convert a numerical speed in Mbps to a bitmap flag that can be used in
* A pointer to an ids array passed by application. This tells which
* statistics values function should retrieve. This parameter
* can be set to NULL if size is 0. In this case function will retrieve
- * all avalible statistics.
+ * all available statistics.
* @param values
* A pointer to a table to be filled with device statistics values.
* @param size
* A pointer to a structure of type *ether_addr* to be filled with
* the Ethernet address of the Ethernet device.
*/
-void rte_eth_macaddr_get(uint16_t port_id, struct ether_addr *mac_addr);
+void rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr);
/**
* Retrieve the contextual information of an Ethernet device.
/**
* Request the driver to free mbufs currently cached by the driver. The
* driver will only free the mbuf if it is no longer in use. It is the
- * application's responsibity to ensure rte_eth_tx_buffer_flush(..) is
+ * application's responsibility to ensure rte_eth_tx_buffer_flush(..) is
* called if needed.
*
* @param port_id
* - (-ENOSPC) if no more MAC addresses can be added.
* - (-EINVAL) if MAC address is invalid.
*/
-int rte_eth_dev_mac_addr_add(uint16_t port_id, struct ether_addr *mac_addr,
+int rte_eth_dev_mac_addr_add(uint16_t port_id, struct rte_ether_addr *mac_addr,
uint32_t pool);
/**
* - (-ENODEV) if *port* invalid.
* - (-EADDRINUSE) if attempting to remove the default MAC address
*/
-int rte_eth_dev_mac_addr_remove(uint16_t port_id, struct ether_addr *mac_addr);
+int rte_eth_dev_mac_addr_remove(uint16_t port_id,
+ struct rte_ether_addr *mac_addr);
/**
* Set the default MAC address.
* - (-EINVAL) if MAC address is invalid.
*/
int rte_eth_dev_default_mac_addr_set(uint16_t port_id,
- struct ether_addr *mac_addr);
+ struct rte_ether_addr *mac_addr);
/**
* Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
* - (-EIO) if device is removed.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct ether_addr *addr,
+int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct rte_ether_addr *addr,
uint8_t on);
/**
* - (-ENODEV) if *port_id* invalid.
* - (-EIO) if device is removed.
*/
+__rte_deprecated
int rte_eth_dev_filter_supported(uint16_t port_id,
enum rte_filter_type filter_type);
* - (-EIO) if device is removed.
* - others depends on the specific operations implementation.
*/
+__rte_deprecated
int rte_eth_dev_filter_ctrl(uint16_t port_id, enum rte_filter_type filter_type,
enum rte_filter_op filter_op, void *arg);
* - (-ENOSPC) if *port_id* has not enough multicast filtering resources.
*/
int rte_eth_dev_set_mc_addr_list(uint16_t port_id,
- struct ether_addr *mc_addr_set,
+ struct rte_ether_addr *mc_addr_set,
uint32_t nb_mc_addr);
/**
git.droids-corp.org / dpdk.git / blobdiff