* rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will
* be retained:
*
+ * - MTU
* - flow control settings
- * - receive mode configuration (promiscuous mode, hardware checksum mode,
- * RSS/VMDQ settings etc.)
+ * - receive mode configuration (promiscuous mode, all-multicast mode,
+ * hardware checksum mode, RSS/VMDQ settings etc.)
* - VLAN filtering configuration
+ * - default MAC address
* - MAC addresses supplied to MAC address array
* - flow director filtering mode (but not filtering rules)
* - NIC queue statistics mappings
#include <rte_config.h>
#include "rte_ether.h"
-#include "rte_eth_ctrl.h"
#include "rte_dev_info.h"
extern int rte_eth_dev_logtype;
struct rte_mbuf;
+/**
+ * Initializes a device iterator.
+ *
+ * This iterator allows accessing a list of devices matching some devargs.
+ *
+ * @param iter
+ * Device iterator handle initialized by the function.
+ * The fields bus_str and cls_str might be dynamically allocated,
+ * and could be freed by calling rte_eth_iterator_cleanup().
+ *
+ * @param devargs
+ * Device description string.
+ *
+ * @return
+ * 0 on successful initialization, negative otherwise.
+ */
+int rte_eth_iterator_init(struct rte_dev_iterator *iter, const char *devargs);
+
+/**
+ * Iterates on devices with devargs filter.
+ * The ownership is not checked.
+ *
+ * The next port id is returned, and the iterator is updated.
+ *
+ * @param iter
+ * Device iterator handle initialized by rte_eth_iterator_init().
+ * Some fields bus_str and cls_str might be freed when no more port is found,
+ * by calling rte_eth_iterator_cleanup().
+ *
+ * @return
+ * A port id if found, RTE_MAX_ETHPORTS otherwise.
+ */
+uint16_t rte_eth_iterator_next(struct rte_dev_iterator *iter);
+
+/**
+ * Free some allocated fields of the iterator.
+ *
+ * This function is automatically called by rte_eth_iterator_next()
+ * on the last iteration (i.e. when no more matching port is found).
+ *
+ * It is safe to call this function twice; it will do nothing more.
+ *
+ * @param iter
+ * Device iterator handle initialized by rte_eth_iterator_init().
+ * The fields bus_str and cls_str are freed if needed.
+ */
+void rte_eth_iterator_cleanup(struct rte_dev_iterator *iter);
+
+/**
+ * Macro to iterate over all ethdev ports matching some devargs.
+ *
+ * If a break is done before the end of the loop,
+ * the function rte_eth_iterator_cleanup() must be called.
+ *
+ * @param id
+ * Iterated port id of type uint16_t.
+ * @param devargs
+ * Device parameters input as string of type char*.
+ * @param iter
+ * Iterator handle of type struct rte_dev_iterator, used internally.
+ */
+#define RTE_ETH_FOREACH_MATCHING_DEV(id, devargs, iter) \
+ for (rte_eth_iterator_init(iter, devargs), \
+ id = rte_eth_iterator_next(iter); \
+ id != RTE_MAX_ETHPORTS; \
+ id = rte_eth_iterator_next(iter))
+
/**
* A structure used to retrieve statistics for an Ethernet port.
* Not all statistics fields in struct rte_eth_stats are supported
};
/*
- * The RSS offload types are defined based on flow types which are defined
- * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload
+ * A packet can be identified by hardware as different flow types. Different
+ * NIC hardware may support different flow types.
+ * Basically, the NIC hardware identifies the flow type as deep protocol as
+ * possible, and exclusively. For example, if a packet is identified as
+ * 'RTE_ETH_FLOW_NONFRAG_IPV4_TCP', it will not be any of other flow types,
+ * though it is an actual IPV4 packet.
+ * Note that the flow types are used to define RSS offload types.
+ */
+#define RTE_ETH_FLOW_UNKNOWN 0
+#define RTE_ETH_FLOW_RAW 1
+#define RTE_ETH_FLOW_IPV4 2
+#define RTE_ETH_FLOW_FRAG_IPV4 3
+#define RTE_ETH_FLOW_NONFRAG_IPV4_TCP 4
+#define RTE_ETH_FLOW_NONFRAG_IPV4_UDP 5
+#define RTE_ETH_FLOW_NONFRAG_IPV4_SCTP 6
+#define RTE_ETH_FLOW_NONFRAG_IPV4_OTHER 7
+#define RTE_ETH_FLOW_IPV6 8
+#define RTE_ETH_FLOW_FRAG_IPV6 9
+#define RTE_ETH_FLOW_NONFRAG_IPV6_TCP 10
+#define RTE_ETH_FLOW_NONFRAG_IPV6_UDP 11
+#define RTE_ETH_FLOW_NONFRAG_IPV6_SCTP 12
+#define RTE_ETH_FLOW_NONFRAG_IPV6_OTHER 13
+#define RTE_ETH_FLOW_L2_PAYLOAD 14
+#define RTE_ETH_FLOW_IPV6_EX 15
+#define RTE_ETH_FLOW_IPV6_TCP_EX 16
+#define RTE_ETH_FLOW_IPV6_UDP_EX 17
+#define RTE_ETH_FLOW_PORT 18
+ /**< Consider device port number as a flow differentiator */
+#define RTE_ETH_FLOW_VXLAN 19 /**< VXLAN protocol based flow */
+#define RTE_ETH_FLOW_GENEVE 20 /**< GENEVE protocol based flow */
+#define RTE_ETH_FLOW_NVGRE 21 /**< NVGRE protocol based flow */
+#define RTE_ETH_FLOW_VXLAN_GPE 22 /**< VXLAN-GPE protocol based flow */
+#define RTE_ETH_FLOW_MAX 23
+
+/*
+ * The RSS offload types are defined based on flow types.
+ * Different NIC hardware may support different RSS offload
* types. The supported flow types or RSS offload types can be queried by
* rte_eth_dev_info_get().
*/
uint8_t priority; /**< VLAN User Priority. */
};
+/**
+ * Tunneled type.
+ */
+enum rte_eth_tunnel_type {
+ RTE_TUNNEL_TYPE_NONE = 0,
+ RTE_TUNNEL_TYPE_VXLAN,
+ RTE_TUNNEL_TYPE_GENEVE,
+ RTE_TUNNEL_TYPE_TEREDO,
+ RTE_TUNNEL_TYPE_NVGRE,
+ RTE_TUNNEL_TYPE_IP_IN_GRE,
+ RTE_L2_TUNNEL_TYPE_E_TAG,
+ RTE_TUNNEL_TYPE_VXLAN_GPE,
+ RTE_TUNNEL_TYPE_MAX,
+};
+
+/* Deprecated API file for rte_eth_dev_filter_* functions */
+#include "rte_eth_ctrl.h"
+
/**
* Memory space that can be configured to store Flow Director filters
* in the board memory.
/** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC
is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */
uint32_t dcb_capability_en;
- struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */
+ struct rte_fdir_conf fdir_conf; /**< FDIR configuration. DEPRECATED */
struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
};
-/**
- * A structure used to retrieve the contextual information of
- * an Ethernet device, such as the controlling driver of the device,
- * its PCI context, etc...
- */
-
/**
* RX offload capabilities of a device.
*/
#define DEV_RX_OFFLOAD_VLAN_FILTER 0x00000200
#define DEV_RX_OFFLOAD_VLAN_EXTEND 0x00000400
#define DEV_RX_OFFLOAD_JUMBO_FRAME 0x00000800
-#define DEV_RX_OFFLOAD_CRC_STRIP 0x00001000
#define DEV_RX_OFFLOAD_SCATTER 0x00002000
#define DEV_RX_OFFLOAD_TIMESTAMP 0x00004000
#define DEV_RX_OFFLOAD_SECURITY 0x00008000
-
-/**
- * Invalid to set both DEV_RX_OFFLOAD_CRC_STRIP and DEV_RX_OFFLOAD_KEEP_CRC
- * No DEV_RX_OFFLOAD_CRC_STRIP flag means keep CRC
- */
#define DEV_RX_OFFLOAD_KEEP_CRC 0x00010000
+#define DEV_RX_OFFLOAD_SCTP_CKSUM 0x00020000
+#define DEV_RX_OFFLOAD_OUTER_UDP_CKSUM 0x00040000
+
#define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \
DEV_RX_OFFLOAD_UDP_CKSUM | \
DEV_RX_OFFLOAD_TCP_CKSUM)
* for tunnel TSO.
*/
#define DEV_TX_OFFLOAD_IP_TNL_TSO 0x00080000
+/** Device supports outer UDP checksum */
+#define DEV_TX_OFFLOAD_OUTER_UDP_CKSUM 0x00100000
+/**
+ * Device supports match on metadata Tx offload..
+ * Application must set PKT_TX_METADATA and mbuf metadata field.
+ */
+#define DEV_TX_OFFLOAD_MATCH_METADATA 0x00200000
#define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP 0x00000001
/**< Device supports Rx queue setup after device started*/
* mentioned in rte_tx_offload_names in rte_ethdev.c file.
*/
-struct rte_pci_device;
-
/*
* Fallback default preferred Rx/Tx port parameters.
* These are used if an application requests default parameters
/**
* Ethernet device information
*/
+
+/**
+ * A structure used to retrieve the contextual information of
+ * an Ethernet device, such as the controlling driver of the
+ * device, etc...
+ */
struct rte_eth_dev_info {
struct rte_device *device; /** Generic device information */
const char *driver_name; /**< Device Driver name. */
unsigned int if_index; /**< Index to bound host interface, or 0 if none.
Use if_indextoname() to translate into an interface name. */
+ uint16_t min_mtu; /**< Minimum MTU allowed */
+ uint16_t max_mtu; /**< Maximum MTU allowed */
const uint32_t *dev_flags; /**< Device flags */
uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */
uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */
/**
* Ethernet device RX queue information structure.
- * Used to retieve information about configured queue.
+ * Used to retrieve information about configured queue.
*/
struct rte_eth_rxq_info {
struct rte_mempool *mp; /**< mempool used by that queue. */
RTE_ETH_DEV_UNUSED = 0,
/** Device is attached when allocated in probing. */
RTE_ETH_DEV_ATTACHED,
- /** The deferred state is useless and replaced by ownership. */
- RTE_ETH_DEV_DEFERRED,
/** Device is in removed state when plug-out is detected. */
RTE_ETH_DEV_REMOVED,
};
char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */
};
+/**
+ * Port is released (i.e. totally freed and data erased) on close.
+ * Temporary flag for PMD migration to new rte_eth_dev_close() behaviour.
+ */
+#define RTE_ETH_DEV_CLOSE_REMOVE 0x0001
/** Device supports link state interrupt */
#define RTE_ETH_DEV_INTR_LSC 0x0002
/** Device is a bonded slave */
#define RTE_ETH_DEV_INTR_RMV 0x0008
/** Device is port representor */
#define RTE_ETH_DEV_REPRESENTOR 0x0010
+/** Device does not support MAC change after started */
+#define RTE_ETH_DEV_NOLIVE_MAC_ADDR 0x0020
/**
* Iterates over valid ethdev ports owned by a specific owner.
#define RTE_ETH_FOREACH_DEV(p) \
RTE_ETH_FOREACH_DEV_OWNED_BY(p, RTE_ETH_DEV_NO_OWNER)
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Iterates over ethdev ports of a specified device.
+ *
+ * @param port_id_start
+ * The id of the next possible valid port.
+ * @param parent
+ * The generic device behind the ports to iterate.
+ * @return
+ * Next port id of the device, possibly port_id_start,
+ * RTE_MAX_ETHPORTS if there is none.
+ */
+uint16_t __rte_experimental
+rte_eth_find_next_of(uint16_t port_id_start,
+ const struct rte_device *parent);
+
+/**
+ * Macro to iterate over all ethdev ports of a specified device.
+ *
+ * @param port_id
+ * The id of the matching port being iterated.
+ * @param parent
+ * The rte_device pointer matching the iterated ports.
+ */
+#define RTE_ETH_FOREACH_DEV_OF(port_id, parent) \
+ for (port_id = rte_eth_find_next_of(0, parent); \
+ port_id < RTE_MAX_ETHPORTS; \
+ port_id = rte_eth_find_next_of(port_id + 1, parent))
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Iterates over sibling ethdev ports (i.e. sharing the same rte_device).
+ *
+ * @param port_id_start
+ * The id of the next possible valid sibling port.
+ * @param ref_port_id
+ * The id of a reference port to compare rte_device with.
+ * @return
+ * Next sibling port id, possibly port_id_start or ref_port_id itself,
+ * RTE_MAX_ETHPORTS if there is none.
+ */
+uint16_t __rte_experimental
+rte_eth_find_next_sibling(uint16_t port_id_start,
+ uint16_t ref_port_id);
+
+/**
+ * Macro to iterate over all ethdev ports sharing the same rte_device
+ * as the specified port.
+ * Note: the specified reference port is part of the loop iterations.
+ *
+ * @param port_id
+ * The id of the matching port being iterated.
+ * @param ref_port_id
+ * The id of the port being compared.
+ */
+#define RTE_ETH_FOREACH_DEV_SIBLING(port_id, ref_port_id) \
+ for (port_id = rte_eth_find_next_sibling(0, ref_port_id); \
+ port_id < RTE_MAX_ETHPORTS; \
+ port_id = rte_eth_find_next_sibling(port_id + 1, ref_port_id))
/**
* @warning
* @return
* The total count of Ethernet devices.
*/
-uint16_t __rte_experimental rte_eth_dev_count_total(void);
-
-/**
- * Attach a new Ethernet device specified by arguments.
- *
- * @param devargs
- * A pointer to a strings array describing the new device
- * to be attached. The strings should be a pci address like
- * '0000:01:00.0' or virtual device name like 'net_pcap0'.
- * @param port_id
- * A pointer to a port identifier actually attached.
- * @return
- * 0 on success and port_id is filled, negative on error
- */
-int rte_eth_dev_attach(const char *devargs, uint16_t *port_id);
-
-/**
- * Detach a Ethernet device specified by port identifier.
- * This function must be called when the device is in the
- * closed state.
- *
- * @param port_id
- * The port identifier of the device to detach.
- * @param devname
- * A pointer to a buffer that will be filled with the device name.
- * This buffer must be at least RTE_DEV_NAME_MAX_LEN long.
- * @return
- * 0 on success and devname is filled, negative on error
- */
-int rte_eth_dev_detach(uint16_t port_id, char *devname);
+uint16_t rte_eth_dev_count_total(void);
/**
* Convert a numerical speed in Mbps to a bitmap flag that can be used in
uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice
- *
* Get DEV_RX_OFFLOAD_* flag name.
*
* @param offload
* @return
* Offload name or 'UNKNOWN' if the flag cannot be recognised.
*/
-const char * __rte_experimental rte_eth_dev_rx_offload_name(uint64_t offload);
+const char *rte_eth_dev_rx_offload_name(uint64_t offload);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice
- *
* Get DEV_TX_OFFLOAD_* flag name.
*
* @param offload
* @return
* Offload name or 'UNKNOWN' if the flag cannot be recognised.
*/
-const char * __rte_experimental rte_eth_dev_tx_offload_name(uint64_t offload);
+const char *rte_eth_dev_tx_offload_name(uint64_t offload);
/**
* Configure an Ethernet device.
* Applications should set the ignore_bitfield_offloads bit on *rxmode*
* structure and use offloads field to set per-port offloads instead.
* - Any offloading set in eth_conf->[rt]xmode.offloads must be within
- * the [rt]x_offload_capa returned from rte_eth_dev_infos_get().
+ * the [rt]x_offload_capa returned from rte_eth_dev_info_get().
* Any type of device supported offloading set in the input argument
* eth_conf->[rt]xmode.offloads to rte_eth_dev_configure() is enabled
* on all queues and it can't be disabled in rte_eth_[rt]x_queue_setup()
* - the Receive Side Scaling (RSS) configuration when using multiple RX
* queues per port. Any RSS hash function set in eth_conf->rss_conf.rss_hf
* must be within the flow_type_rss_offloads provided by drivers via
- * rte_eth_dev_infos_get() API.
+ * rte_eth_dev_info_get() API.
*
* Embedding all configuration information in a single data structure
* is the more flexible method that allows the addition of new features
* The device start step is the last one and consists of setting the configured
* offload features and in starting the transmit and the receive units of the
* device.
+ *
+ * Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be set before
+ * PMD port start callback function is invoked.
+ *
* On success, all basic functions exported by the Ethernet API (link status,
* receive/transmit, and so on) can be invoked.
*
/**
* Close a stopped Ethernet device. The device cannot be restarted!
- * The function frees all resources except for needed by the
- * closed state. To free these resources, call rte_eth_dev_detach().
+ * The function frees all port resources if the driver supports
+ * the flag RTE_ETH_DEV_CLOSE_REMOVE.
*
* @param port_id
* The port identifier of the Ethernet device.
* A pointer to an ids array passed by application. This tells which
* statistics values function should retrieve. This parameter
* can be set to NULL if size is 0. In this case function will retrieve
- * all avalible statistics.
+ * all available statistics.
* @param values
* A pointer to a table to be filled with device statistics values.
* @param size
* A pointer to a structure of type *ether_addr* to be filled with
* the Ethernet address of the Ethernet device.
*/
-void rte_eth_macaddr_get(uint16_t port_id, struct ether_addr *mac_addr);
+void rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr);
/**
* Retrieve the contextual information of an Ethernet device.
*
+ * As part of this function, a number of of fields in dev_info will be
+ * initialized as follows:
+ *
+ * rx_desc_lim = lim
+ * tx_desc_lim = lim
+ *
+ * Where lim is defined within the rte_eth_dev_info_get as
+ *
+ * const struct rte_eth_desc_lim lim = {
+ * .nb_max = UINT16_MAX,
+ * .nb_min = 0,
+ * .nb_align = 1,
+ * };
+ *
+ * device = dev->device
+ * min_mtu = ETHER_MIN_MTU
+ * max_mtu = UINT16_MAX
+ *
+ * The following fields will be populated if support for dev_infos_get()
+ * exists for the device and the rte_eth_dev 'dev' has been populated
+ * successfully with a call to it:
+ *
+ * driver_name = dev->device->driver->name
+ * nb_rx_queues = dev->data->nb_rx_queues
+ * nb_tx_queues = dev->data->nb_tx_queues
+ * dev_flags = &dev->data->dev_flags
+ *
* @param port_id
* The port identifier of the Ethernet device.
* @param dev_info
* - (-ENOTSUP) if operation is not supported.
* - (-ENODEV) if *port_id* invalid.
* - (-EIO) if device is removed.
- * - (-EINVAL) if *mtu* invalid.
+ * - (-EINVAL) if *mtu* invalid, validation of mtu can occur within
+ * rte_eth_dev_set_mtu if dev_infos_get is supported by the device or
+ * when the mtu is set using dev->dev_ops->mtu_set.
* - (-EBUSY) if operation is not allowed when the port is running
*/
int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu);
/**
* Request the driver to free mbufs currently cached by the driver. The
* driver will only free the mbuf if it is no longer in use. It is the
- * application's responsibity to ensure rte_eth_tx_buffer_flush(..) is
+ * application's responsibility to ensure rte_eth_tx_buffer_flush(..) is
* called if needed.
*
* @param port_id
int rte_eth_dev_rx_intr_ctl_q(uint16_t port_id, uint16_t queue_id,
int epfd, int op, void *data);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get interrupt fd per Rx queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (>=0) the interrupt fd associated to the requested Rx queue if
+ * successful.
+ * - (-1) on error.
+ */
+int __rte_experimental
+rte_eth_dev_rx_intr_ctl_q_get_fd(uint16_t port_id, uint16_t queue_id);
+
/**
* Turn on the LED on the Ethernet device.
* This function turns on the LED on the Ethernet device.
* - (-ENOSPC) if no more MAC addresses can be added.
* - (-EINVAL) if MAC address is invalid.
*/
-int rte_eth_dev_mac_addr_add(uint16_t port_id, struct ether_addr *mac_addr,
+int rte_eth_dev_mac_addr_add(uint16_t port_id, struct rte_ether_addr *mac_addr,
uint32_t pool);
/**
* - (-ENODEV) if *port* invalid.
* - (-EADDRINUSE) if attempting to remove the default MAC address
*/
-int rte_eth_dev_mac_addr_remove(uint16_t port_id, struct ether_addr *mac_addr);
+int rte_eth_dev_mac_addr_remove(uint16_t port_id,
+ struct rte_ether_addr *mac_addr);
/**
* Set the default MAC address.
* - (-EINVAL) if MAC address is invalid.
*/
int rte_eth_dev_default_mac_addr_set(uint16_t port_id,
- struct ether_addr *mac_addr);
+ struct rte_ether_addr *mac_addr);
/**
* Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
* @param port_id
* The port identifier of the Ethernet device.
* @param reta_conf
- * RETA to query.
+ * RETA to query. For each requested reta entry, corresponding bit
+ * in mask must be set.
* @param reta_size
* Redirection table size. The table size can be queried by
* rte_eth_dev_info_get().
* - (-EIO) if device is removed.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct ether_addr *addr,
+int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct rte_ether_addr *addr,
uint8_t on);
/**
* - (-ENODEV) if *port_id* invalid.
* - (-EIO) if device is removed.
*/
+__rte_deprecated
int rte_eth_dev_filter_supported(uint16_t port_id,
enum rte_filter_type filter_type);
* - (-EIO) if device is removed.
* - others depends on the specific operations implementation.
*/
+__rte_deprecated
int rte_eth_dev_filter_ctrl(uint16_t port_id, enum rte_filter_type filter_type,
enum rte_filter_op filter_op, void *arg);
* - (-ENOSPC) if *port_id* has not enough multicast filtering resources.
*/
int rte_eth_dev_set_mc_addr_list(uint16_t port_id,
- struct ether_addr *mc_addr_set,
+ struct rte_ether_addr *mc_addr_set,
uint32_t nb_mc_addr);
/**
}
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice
- *
* Process a burst of output packets on a transmit queue of an Ethernet device.
*
* The rte_eth_tx_prepare() function is invoked to prepare output packets to be
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
if (!rte_eth_dev_is_valid_port(port_id)) {
RTE_ETHDEV_LOG(ERR, "Invalid TX port_id=%u\n", port_id);
- rte_errno = -EINVAL;
+ rte_errno = EINVAL;
return 0;
}
#endif
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
if (queue_id >= dev->data->nb_tx_queues) {
RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
- rte_errno = -EINVAL;
+ rte_errno = EINVAL;
return 0;
}
#endif
git.droids-corp.org / dpdk.git / blobdiff