#include <rte_arp.h>
#include <rte_common.h>
#include <rte_ether.h>
-#include <rte_eth_ctrl.h>
#include <rte_icmp.h>
#include <rte_ip.h>
#include <rte_sctp.h>
* See struct rte_flow_item_mark.
*/
RTE_FLOW_ITEM_TYPE_MARK,
+
+ /**
+ * [META]
+ *
+ * Matches a metadata value specified in mbuf metadata field.
+ * See struct rte_flow_item_meta.
+ */
+ RTE_FLOW_ITEM_TYPE_META,
};
/**
* same order as on the wire.
*/
struct rte_flow_item_eth {
- struct ether_addr dst; /**< Destination MAC. */
- struct ether_addr src; /**< Source MAC. */
+ struct rte_ether_addr dst; /**< Destination MAC. */
+ struct rte_ether_addr src; /**< Source MAC. */
rte_be16_t type; /**< EtherType or TPID. */
};
* Matches an 802.1Q/ad VLAN tag.
*
* The corresponding standard outer EtherType (TPID) values are
- * ETHER_TYPE_VLAN or ETHER_TYPE_QINQ. It can be overridden by the preceding
- * pattern item.
+ * RTE_ETHER_TYPE_VLAN or RTE_ETHER_TYPE_QINQ. It can be overridden by
+ * the preceding pattern item.
*/
struct rte_flow_item_vlan {
rte_be16_t tci; /**< Tag control information. */
* Matches a E-tag header.
*
* The corresponding standard outer EtherType (TPID) value is
- * ETHER_TYPE_ETAG. It can be overridden by the preceding pattern item.
+ * RTE_ETHER_TYPE_ETAG. It can be overridden by the preceding pattern item.
*/
struct rte_flow_item_e_tag {
/**
* Matches an ESP header.
*/
struct rte_flow_item_esp {
- struct esp_hdr hdr; /**< ESP header definition. */
+ struct rte_esp_hdr hdr; /**< ESP header definition. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_ESP. */
uint8_t hln; /**< Hardware address length, normally 6. */
uint8_t pln; /**< Protocol address length, normally 4. */
rte_be16_t op; /**< Opcode (1 for request, 2 for reply). */
- struct ether_addr sha; /**< Sender hardware address. */
+ struct rte_ether_addr sha; /**< Sender hardware address. */
rte_be32_t spa; /**< Sender IPv4 address. */
- struct ether_addr tha; /**< Target hardware address. */
+ struct rte_ether_addr tha; /**< Target hardware address. */
rte_be32_t tpa; /**< Target IPv4 address. */
};
struct rte_flow_item_icmp6_nd_opt_sla_eth {
uint8_t type; /**< ND option type, normally 1. */
uint8_t length; /**< ND option length, normally 1. */
- struct ether_addr sla; /**< Source Ethernet LLA. */
+ struct rte_ether_addr sla; /**< Source Ethernet LLA. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_SLA_ETH. */
struct rte_flow_item_icmp6_nd_opt_tla_eth {
uint8_t type; /**< ND option type, normally 2. */
uint8_t length; /**< ND option length, normally 1. */
- struct ether_addr tla; /**< Target Ethernet LLA. */
+ struct rte_ether_addr tla; /**< Target Ethernet LLA. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_TLA_ETH. */
};
#endif
+/**
+ * RTE_FLOW_ITEM_TYPE_META.
+ *
+ * Matches a specified metadata value.
+ */
+struct rte_flow_item_meta {
+ rte_be32_t data;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_META. */
+#ifndef __cplusplus
+static const struct rte_flow_item_meta rte_flow_item_meta_mask = {
+ .data = RTE_BE32(UINT32_MAX),
+};
+#endif
+
/**
* @warning
* @b EXPERIMENTAL: this structure may change without prior notice
*/
RTE_FLOW_ACTION_TYPE_NVGRE_DECAP,
+ /**
+ * Add outer header whose template is provided in its data buffer
+ *
+ * See struct rte_flow_action_raw_encap.
+ */
+ RTE_FLOW_ACTION_TYPE_RAW_ENCAP,
+
+ /**
+ * Remove outer header whose template is provided in its data buffer.
+ *
+ * See struct rte_flow_action_raw_decap
+ */
+ RTE_FLOW_ACTION_TYPE_RAW_DECAP,
+
/**
* Modify IPv4 source address in the outermost IPv4 header.
*
* No associated configuration structure.
*/
RTE_FLOW_ACTION_TYPE_MAC_SWAP,
+
+ /**
+ * Decrease TTL value directly
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_DEC_TTL,
+
+ /**
+ * Set TTL value
+ *
+ * See struct rte_flow_action_set_ttl
+ */
+ RTE_FLOW_ACTION_TYPE_SET_TTL,
+
+ /**
+ * Set source MAC address from matched flow.
+ *
+ * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH,
+ * the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
+ *
+ * See struct rte_flow_action_set_mac.
+ */
+ RTE_FLOW_ACTION_TYPE_SET_MAC_SRC,
+
+ /**
+ * Set destination MAC address from matched flow.
+ *
+ * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH,
+ * the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
+ *
+ * See struct rte_flow_action_set_mac.
+ */
+ RTE_FLOW_ACTION_TYPE_SET_MAC_DST,
};
/**
uint64_t bytes; /**< Number of bytes through this rule [out]. */
};
+/**
+ * Hash function types.
+ */
+enum rte_eth_hash_function {
+ RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
+ RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
+ RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
+ RTE_ETH_HASH_FUNCTION_MAX,
+};
+
/**
* RTE_FLOW_ACTION_TYPE_RSS
*
struct rte_flow_item *definition;
};
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_RAW_ENCAP
+ *
+ * Raw tunnel end-point encapsulation data definition.
+ *
+ * The data holds the headers definitions to be applied on the packet.
+ * The data must start with ETH header up to the tunnel item header itself.
+ * When used right after RAW_DECAP (for decapsulating L3 tunnel type for
+ * example MPLSoGRE) the data will just hold layer 2 header.
+ *
+ * The preserve parameter holds which bits in the packet the PMD is not allowed
+ * to change, this parameter can also be NULL and then the PMD is allowed
+ * to update any field.
+ *
+ * size holds the number of bytes in @p data and @p preserve.
+ */
+struct rte_flow_action_raw_encap {
+ uint8_t *data; /**< Encapsulation data. */
+ uint8_t *preserve; /**< Bit-mask of @p data to preserve on output. */
+ size_t size; /**< Size of @p data and @p preserve. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_RAW_DECAP
+ *
+ * Raw tunnel end-point decapsulation data definition.
+ *
+ * The data holds the headers definitions to be removed from the packet.
+ * The data must start with ETH header up to the tunnel item header itself.
+ * When used right before RAW_DECAP (for encapsulating L3 tunnel type for
+ * example MPLSoGRE) the data will just hold layer 2 header.
+ *
+ * size holds the number of bytes in @p data.
+ */
+struct rte_flow_action_raw_decap {
+ uint8_t *data; /**< Encapsulation data. */
+ size_t size; /**< Size of @p data and @p preserve. */
+};
+
/**
* @warning
* @b EXPERIMENTAL: this structure may change without prior notice
rte_be16_t port;
};
+/**
+ * RTE_FLOW_ACTION_TYPE_SET_TTL
+ *
+ * Set the TTL value directly for IPv4 or IPv6
+ */
+struct rte_flow_action_set_ttl {
+ uint8_t ttl_value;
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_SET_MAC
+ *
+ * Set MAC address from the matched flow
+ */
+struct rte_flow_action_set_mac {
+ uint8_t mac_addr[RTE_ETHER_ADDR_LEN];
+};
+
/*
* Definition of a single action.
*
git.droids-corp.org / dpdk.git / blobdiff