#include <rte_atomic.h>
#include <rte_prefetch.h>
#include <rte_branch_prediction.h>
+#include <rte_byteorder.h>
#include <rte_mbuf_ptype.h>
#ifdef __cplusplus
/* add new TX flags here */
+/**
+ * Indicate that the metadata field in the mbuf is in use.
+ */
+#define PKT_TX_METADATA (1ULL << 40)
+
+/**
+ * Outer UDP checksum offload flag. This flag is used for enabling
+ * outer UDP checksum in PMD. To use outer UDP checksum, the user needs to
+ * 1) Enable the following in mbuf,
+ * a) Fill outer_l2_len and outer_l3_len in mbuf.
+ * b) Set the PKT_TX_OUTER_UDP_CKSUM flag.
+ * c) Set the PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6 flag.
+ * 2) Configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flag.
+ */
+#define PKT_TX_OUTER_UDP_CKSUM (1ULL << 41)
+
/**
* UDP Fragmentation Offload flag. This flag is used for enabling UDP
* fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
#define PKT_TX_TUNNEL_MASK (0xFULL << 45)
/**
- * Second VLAN insertion (QinQ) flag.
+ * Double VLAN insertion (QinQ) request to driver, driver may offload the
+ * insertion based on device capability.
+ * mbuf 'vlan_tci' & 'vlan_tci_outer' must be valid when this flag is set.
*/
-#define PKT_TX_QINQ (1ULL << 49) /**< TX packet with double VLAN inserted. */
+#define PKT_TX_QINQ (1ULL << 49)
/* this old name is deprecated */
#define PKT_TX_QINQ_PKT PKT_TX_QINQ
#define PKT_TX_IPV6 (1ULL << 56)
/**
- * TX packet is a 802.1q VLAN packet.
+ * VLAN tag insertion request to driver, driver may offload the insertion
+ * based on the device capability.
+ * mbuf 'vlan_tci' field must be valid when this flag is set.
*/
#define PKT_TX_VLAN (1ULL << 57)
/* this old name is deprecated */
PKT_TX_QINQ_PKT | \
PKT_TX_TUNNEL_MASK | \
PKT_TX_MACSEC | \
- PKT_TX_SEC_OFFLOAD | \
- PKT_TX_UDP_SEG)
+ PKT_TX_SEC_OFFLOAD | \
+ PKT_TX_UDP_SEG | \
+ PKT_TX_OUTER_UDP_CKSUM | \
+ PKT_TX_METADATA)
/**
* Mbuf having an external buffer attached. shinfo in mbuf must be filled.
typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
* with a single assignment */
+struct rte_mbuf_sched {
+ uint32_t queue_id; /**< Queue ID. */
+ uint8_t traffic_class;
+ /**< Traffic class ID. Traffic class 0
+ * is the highest priority traffic class.
+ */
+ uint8_t color;
+ /**< Color. @see enum rte_color.*/
+ uint16_t reserved; /**< Reserved. */
+}; /**< Hierarchical scheduler */
+
+/**
+ * enum for the tx_offload bit-fields lengths and offsets.
+ * defines the layout of rte_mbuf tx_offload field.
+ */
+enum {
+ RTE_MBUF_L2_LEN_BITS = 7,
+ RTE_MBUF_L3_LEN_BITS = 9,
+ RTE_MBUF_L4_LEN_BITS = 8,
+ RTE_MBUF_TSO_SEGSZ_BITS = 16,
+ RTE_MBUF_OUTL3_LEN_BITS = 9,
+ RTE_MBUF_OUTL2_LEN_BITS = 7,
+ RTE_MBUF_TXOFLD_UNUSED_BITS = sizeof(uint64_t) * CHAR_BIT -
+ RTE_MBUF_L2_LEN_BITS -
+ RTE_MBUF_L3_LEN_BITS -
+ RTE_MBUF_L4_LEN_BITS -
+ RTE_MBUF_TSO_SEGSZ_BITS -
+ RTE_MBUF_OUTL3_LEN_BITS -
+ RTE_MBUF_OUTL2_LEN_BITS,
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ RTE_MBUF_L2_LEN_OFS =
+ sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
+ RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS - RTE_MBUF_L3_LEN_BITS,
+ RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS - RTE_MBUF_L4_LEN_BITS,
+ RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS - RTE_MBUF_TSO_SEGSZ_BITS,
+ RTE_MBUF_OUTL3_LEN_OFS =
+ RTE_MBUF_TSO_SEGSZ_OFS - RTE_MBUF_OUTL3_LEN_BITS,
+ RTE_MBUF_OUTL2_LEN_OFS =
+ RTE_MBUF_OUTL3_LEN_OFS - RTE_MBUF_OUTL2_LEN_BITS,
+ RTE_MBUF_TXOFLD_UNUSED_OFS =
+ RTE_MBUF_OUTL2_LEN_OFS - RTE_MBUF_TXOFLD_UNUSED_BITS,
+#else
+ RTE_MBUF_L2_LEN_OFS = 0,
+ RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS + RTE_MBUF_L2_LEN_BITS,
+ RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS + RTE_MBUF_L3_LEN_BITS,
+ RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS + RTE_MBUF_L4_LEN_BITS,
+ RTE_MBUF_OUTL3_LEN_OFS =
+ RTE_MBUF_TSO_SEGSZ_OFS + RTE_MBUF_TSO_SEGSZ_BITS,
+ RTE_MBUF_OUTL2_LEN_OFS =
+ RTE_MBUF_OUTL3_LEN_OFS + RTE_MBUF_OUTL3_LEN_BITS,
+ RTE_MBUF_TXOFLD_UNUSED_OFS =
+ RTE_MBUF_OUTL2_LEN_OFS + RTE_MBUF_OUTL2_LEN_BITS,
+#endif
+};
+
/**
* The generic rte_mbuf, containing a packet mbuf.
*/
/** VLAN TCI (CPU order), valid if PKT_RX_VLAN is set. */
uint16_t vlan_tci;
+ RTE_STD_C11
union {
- uint32_t rss; /**< RSS hash result if RSS enabled */
- struct {
- RTE_STD_C11
- union {
- struct {
- uint16_t hash;
- uint16_t id;
+ union {
+ uint32_t rss; /**< RSS hash result if RSS enabled */
+ struct {
+ union {
+ struct {
+ uint16_t hash;
+ uint16_t id;
+ };
+ uint32_t lo;
+ /**< Second 4 flexible bytes */
};
- uint32_t lo;
- /**< Second 4 flexible bytes */
- };
- uint32_t hi;
- /**< First 4 flexible bytes or FD ID, dependent on
- PKT_RX_FDIR_* flag in ol_flags. */
- } fdir; /**< Filter identifier if FDIR enabled */
+ uint32_t hi;
+ /**< First 4 flexible bytes or FD ID, dependent
+ * on PKT_RX_FDIR_* flag in ol_flags.
+ */
+ } fdir; /**< Filter identifier if FDIR enabled */
+ struct rte_mbuf_sched sched;
+ /**< Hierarchical scheduler : 8 bytes */
+ struct {
+ uint32_t reserved1;
+ uint16_t reserved2;
+ uint16_t txq;
+ /**< The event eth Tx adapter uses this field
+ * to store Tx queue id.
+ * @see rte_event_eth_tx_adapter_txq_set()
+ */
+ } txadapter; /**< Eventdev ethdev Tx adapter */
+ /**< User defined tags. See rte_distributor_process() */
+ uint32_t usr;
+ } hash; /**< hash information */
struct {
- uint32_t lo;
- uint32_t hi;
- /**< The event eth Tx adapter uses this field to store
- * Tx queue id. @see rte_event_eth_tx_adapter_txq_set()
+ /**
+ * Application specific metadata value
+ * for egress flow rule match.
+ * Valid if PKT_TX_METADATA is set.
+ * Located here to allow conjunct use
+ * with hash.sched.hi.
*/
- } sched; /**< Hierarchical scheduler */
- uint32_t usr; /**< User defined tags. See rte_distributor_process() */
- } hash; /**< hash information */
+ uint32_t tx_metadata;
+ uint32_t reserved;
+ };
+ };
/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ is set. */
uint16_t vlan_tci_outer;
/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
* are not normalized but are always the same for a given port.
+ * Some devices allow to query rte_eth_read_clock that will return the
+ * current device timestamp.
*/
uint64_t timestamp;
uint64_t tx_offload; /**< combined for easy fetch */
__extension__
struct {
- uint64_t l2_len:7;
+ uint64_t l2_len:RTE_MBUF_L2_LEN_BITS;
/**< L2 (MAC) Header Length for non-tunneling pkt.
* Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
*/
- uint64_t l3_len:9; /**< L3 (IP) Header Length. */
- uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
- uint64_t tso_segsz:16; /**< TCP TSO segment size */
-
- /* fields for TX offloading of tunnels */
- uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */
- uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */
+ uint64_t l3_len:RTE_MBUF_L3_LEN_BITS;
+ /**< L3 (IP) Header Length. */
+ uint64_t l4_len:RTE_MBUF_L4_LEN_BITS;
+ /**< L4 (TCP/UDP) Header Length. */
+ uint64_t tso_segsz:RTE_MBUF_TSO_SEGSZ_BITS;
+ /**< TCP TSO segment size */
+
+ /*
+ * Fields for Tx offloading of tunnels.
+ * These are undefined for packets which don't request
+ * any tunnel offloads (outer IP or UDP checksum,
+ * tunnel TSO).
+ *
+ * PMDs should not use these fields unconditionally
+ * when calculating offsets.
+ *
+ * Applications are expected to set appropriate tunnel
+ * offload flags when they fill in these fields.
+ */
+ uint64_t outer_l3_len:RTE_MBUF_OUTL3_LEN_BITS;
+ /**< Outer L3 (IP) Hdr Length. */
+ uint64_t outer_l2_len:RTE_MBUF_OUTL2_LEN_BITS;
+ /**< Outer L2 (MAC) Hdr Length. */
- /* uint64_t unused:8; */
+ /* uint64_t unused:RTE_MBUF_TXOFLD_UNUSED_BITS; */
};
};
}
/**
- * Return the buffer address embedded in the given mbuf.
+ * Return address of buffer embedded in the given mbuf.
+ *
+ * The return value shall be same as mb->buf_addr if the mbuf is already
+ * initialized and direct. However, this API is useful if mempool of the
+ * mbuf is already known because it doesn't need to access mbuf contents in
+ * order to get the mempool pointer.
+ *
+ * @warning
+ * @b EXPERIMENTAL: This API may change without prior notice.
+ * This will be used by rte_mbuf_to_baddr() which has redundant code once
+ * experimental tag is removed.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @param mp
+ * The pointer to the mempool of the mbuf.
+ * @return
+ * The pointer of the mbuf buffer.
+ */
+__rte_experimental
+static inline char *
+rte_mbuf_buf_addr(struct rte_mbuf *mb, struct rte_mempool *mp)
+{
+ return (char *)mb + sizeof(*mb) + rte_pktmbuf_priv_size(mp);
+}
+
+/**
+ * Return the default address of the beginning of the mbuf data.
+ *
+ * @warning
+ * @b EXPERIMENTAL: This API may change without prior notice.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The pointer of the beginning of the mbuf data.
+ */
+__rte_experimental
+static inline char *
+rte_mbuf_data_addr_default(__rte_unused struct rte_mbuf *mb)
+{
+ /* gcc complains about calling this experimental function even
+ * when not using it. Hide it with ALLOW_EXPERIMENTAL_API.
+ */
+#ifdef ALLOW_EXPERIMENTAL_API
+ return rte_mbuf_buf_addr(mb, mb->pool) + RTE_PKTMBUF_HEADROOM;
+#else
+ return NULL;
+#endif
+}
+
+/**
+ * Return address of buffer embedded in the given mbuf.
+ *
+ * @note: Accessing mempool pointer of a mbuf is expensive because the
+ * pointer is stored in the 2nd cache line of mbuf. If mempool is known, it
+ * is better not to reference the mempool pointer in mbuf but calling
+ * rte_mbuf_buf_addr() would be more efficient.
*
* @param md
* The pointer to the mbuf.
static inline char *
rte_mbuf_to_baddr(struct rte_mbuf *md)
{
+#ifdef ALLOW_EXPERIMENTAL_API
+ return rte_mbuf_buf_addr(md, md->pool);
+#else
char *buffer_addr;
buffer_addr = (char *)md + sizeof(*md) + rte_pktmbuf_priv_size(md->pool);
return buffer_addr;
+#endif
}
/**
* @return
* The starting address of the private data area of the given mbuf.
*/
-static inline void * __rte_experimental
+__rte_experimental
+static inline void *
rte_mbuf_to_priv(struct rte_mbuf *m)
{
return RTE_PTR_ADD(m, sizeof(struct rte_mbuf));
*/
#define RTE_MBUF_CLONED(mb) ((mb)->ol_flags & IND_ATTACHED_MBUF)
-/**
- * Deprecated.
- * Use RTE_MBUF_CLONED().
- */
-#define RTE_MBUF_INDIRECT(mb) RTE_MBUF_CLONED(mb)
-
/**
* Returns TRUE if given mbuf has an external buffer, or FALSE otherwise.
*
{
/*
* The atomic_add is an expensive operation, so we don't want to
- * call it in the case where we know we are the uniq holder of
+ * call it in the case where we know we are the unique holder of
* this mbuf (i.e. ref_cnt == 1). Otherwise, an atomic
* operation has to be used because concurrent accesses on the
* reference counter can occur.
void
rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
+/**
+ * Sanity checks on a mbuf.
+ *
+ * Almost like rte_mbuf_sanity_check(), but this function gives the reason
+ * if corruption is detected rather than panic.
+ *
+ * @param m
+ * The mbuf to be checked.
+ * @param is_header
+ * True if the mbuf is a packet header, false if it is a sub-segment
+ * of a packet (in this case, some fields like nb_segs are not checked)
+ * @param reason
+ * A reference to a string pointer where to store the reason why a mbuf is
+ * considered invalid.
+ * @return
+ * - 0 if no issue has been found, reason is left untouched.
+ * - -1 if a problem is detected, reason then points to a string describing
+ * the reason why the mbuf is deemed invalid.
+ */
+__rte_experimental
+int rte_mbuf_check(const struct rte_mbuf *m, int is_header,
+ const char **reason);
+
#define MBUF_RAW_ALLOC_CHECK(m) do { \
RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1); \
RTE_ASSERT((m)->next == NULL); \
* The given mbuf must have only one segment.
*
* @param m
- * The packet mbuf to be resetted.
+ * The packet mbuf to be reset.
*/
#define MBUF_INVALID_PORT UINT16_MAX
* ``rte_pktmbuf_detach()``.
*
* Memory for shared data must be provided and user must initialize all of
- * the content properly, escpecially free callback and refcnt. The pointer
+ * the content properly, especially free callback and refcnt. The pointer
* of shared data will be stored in m->shinfo.
* ``rte_pktmbuf_ext_shinfo_init_helper`` can help to simply spare a few
* bytes at the end of buffer for the shared data, store free callback and
* attached with appropriate free callback and its IO address.
* - Smaller metadata is required to maintain shared data such as refcnt.
*
- * @warning
- * @b EXPERIMENTAL: This API may change without prior notice.
- * Once external buffer is enabled by allowing experimental API,
- * ``RTE_MBUF_DIRECT()`` and ``RTE_MBUF_INDIRECT()`` are no longer
- * exclusive. A mbuf can be considered direct if it is neither indirect nor
- * having external buffer.
- *
* @param m
* The pointer to the mbuf.
* @param buf_addr
* @param shinfo
* User-provided memory for shared data of the external buffer.
*/
-static inline void __rte_experimental
+static inline void
rte_pktmbuf_attach_extbuf(struct rte_mbuf *m, void *buf_addr,
rte_iova_t buf_iova, uint16_t buf_len,
struct rte_mbuf_ext_shared_info *shinfo)
*/
#define rte_pktmbuf_detach_extbuf(m) rte_pktmbuf_detach(m)
+/* internal */
+static inline void
+__rte_pktmbuf_copy_hdr(struct rte_mbuf *mdst, const struct rte_mbuf *msrc)
+{
+ mdst->port = msrc->port;
+ mdst->vlan_tci = msrc->vlan_tci;
+ mdst->vlan_tci_outer = msrc->vlan_tci_outer;
+ mdst->tx_offload = msrc->tx_offload;
+ mdst->hash = msrc->hash;
+ mdst->packet_type = msrc->packet_type;
+ mdst->timestamp = msrc->timestamp;
+}
+
/**
* Attach packet mbuf to another packet mbuf.
*
mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
}
- mi->buf_iova = m->buf_iova;
- mi->buf_addr = m->buf_addr;
- mi->buf_len = m->buf_len;
+ __rte_pktmbuf_copy_hdr(mi, m);
mi->data_off = m->data_off;
mi->data_len = m->data_len;
- mi->port = m->port;
- mi->vlan_tci = m->vlan_tci;
- mi->vlan_tci_outer = m->vlan_tci_outer;
- mi->tx_offload = m->tx_offload;
- mi->hash = m->hash;
+ mi->buf_iova = m->buf_iova;
+ mi->buf_addr = m->buf_addr;
+ mi->buf_len = m->buf_len;
mi->next = NULL;
mi->pkt_len = mi->data_len;
mi->nb_segs = 1;
- mi->packet_type = m->packet_type;
- mi->timestamp = m->timestamp;
__rte_mbuf_sanity_check(mi, 1);
__rte_mbuf_sanity_check(m, 0);
{
struct rte_mbuf *md;
- RTE_ASSERT(RTE_MBUF_INDIRECT(m));
+ RTE_ASSERT(RTE_MBUF_CLONED(m));
md = rte_mbuf_from_indirect(m);
}
/**
- * Creates a "clone" of the given packet mbuf.
+ * Create a "clone" of the given packet mbuf.
*
* Walks through all segments of the given packet mbuf, and for each of them:
* - Creates a new packet mbuf from the given pool.
* - The pointer to the new "clone" mbuf on success.
* - NULL if allocation fails.
*/
-static inline struct rte_mbuf *rte_pktmbuf_clone(struct rte_mbuf *md,
- struct rte_mempool *mp)
-{
- struct rte_mbuf *mc, *mi, **prev;
- uint32_t pktlen;
- uint16_t nseg;
-
- if (unlikely ((mc = rte_pktmbuf_alloc(mp)) == NULL))
- return NULL;
-
- mi = mc;
- prev = &mi->next;
- pktlen = md->pkt_len;
- nseg = 0;
-
- do {
- nseg++;
- rte_pktmbuf_attach(mi, md);
- *prev = mi;
- prev = &mi->next;
- } while ((md = md->next) != NULL &&
- (mi = rte_pktmbuf_alloc(mp)) != NULL);
-
- *prev = NULL;
- mc->nb_segs = nseg;
- mc->pkt_len = pktlen;
-
- /* Allocation of new indirect segment failed */
- if (unlikely (mi == NULL)) {
- rte_pktmbuf_free(mc);
- return NULL;
- }
+struct rte_mbuf *
+rte_pktmbuf_clone(struct rte_mbuf *md, struct rte_mempool *mp);
- __rte_mbuf_sanity_check(mc, 1);
- return mc;
-}
+/**
+ * Create a full copy of a given packet mbuf.
+ *
+ * Copies all the data from a given packet mbuf to a newly allocated
+ * set of mbufs. The private data are is not copied.
+ *
+ * @param m
+ * The packet mbuf to be copiedd.
+ * @param mp
+ * The mempool from which the "clone" mbufs are allocated.
+ * @param offset
+ * The number of bytes to skip before copying.
+ * If the mbuf does not have that many bytes, it is an error
+ * and NULL is returned.
+ * @param length
+ * The upper limit on bytes to copy. Passing UINT32_MAX
+ * means all data (after offset).
+ * @return
+ * - The pointer to the new "clone" mbuf on success.
+ * - NULL if allocation fails.
+ */
+__rte_experimental
+struct rte_mbuf *
+rte_pktmbuf_copy(const struct rte_mbuf *m, struct rte_mempool *mp,
+ uint32_t offset, uint32_t length);
/**
* Adds given value to the refcnt of all packet mbuf segments.
return 0;
}
+/*
+ * @warning
+ * @b EXPERIMENTAL: This API may change without prior notice.
+ *
+ * For given input values generate raw tx_offload value.
+ * Note that it is caller responsibility to make sure that input parameters
+ * don't exceed maximum bit-field values.
+ * @param il2
+ * l2_len value.
+ * @param il3
+ * l3_len value.
+ * @param il4
+ * l4_len value.
+ * @param tso
+ * tso_segsz value.
+ * @param ol3
+ * outer_l3_len value.
+ * @param ol2
+ * outer_l2_len value.
+ * @param unused
+ * unused value.
+ * @return
+ * raw tx_offload value.
+ */
+static __rte_always_inline uint64_t
+rte_mbuf_tx_offload(uint64_t il2, uint64_t il3, uint64_t il4, uint64_t tso,
+ uint64_t ol3, uint64_t ol2, uint64_t unused)
+{
+ return il2 << RTE_MBUF_L2_LEN_OFS |
+ il3 << RTE_MBUF_L3_LEN_OFS |
+ il4 << RTE_MBUF_L4_LEN_OFS |
+ tso << RTE_MBUF_TSO_SEGSZ_OFS |
+ ol3 << RTE_MBUF_OUTL3_LEN_OFS |
+ ol2 << RTE_MBUF_OUTL2_LEN_OFS |
+ unused << RTE_MBUF_TXOFLD_UNUSED_OFS;
+}
+
/**
* Validate general requirements for Tx offload in mbuf.
*
rte_validate_tx_offload(const struct rte_mbuf *m)
{
uint64_t ol_flags = m->ol_flags;
- uint64_t inner_l3_offset = m->l2_len;
/* Does packet set any of available offloads? */
if (!(ol_flags & PKT_TX_OFFLOAD_MASK))
return 0;
- if (ol_flags & PKT_TX_OUTER_IP_CKSUM)
- /* NB: elaborating the addition like this instead of using
- * += gives the result uint64_t type instead of int,
- * avoiding compiler warnings on gcc 8.1 at least */
- inner_l3_offset = inner_l3_offset + m->outer_l2_len +
- m->outer_l3_len;
-
- /* Headers are fragmented */
- if (rte_pktmbuf_data_len(m) < inner_l3_offset + m->l3_len + m->l4_len)
- return -ENOTSUP;
-
/* IP checksum can be counted only for IPv4 packet */
if ((ol_flags & PKT_TX_IP_CKSUM) && (ol_flags & PKT_TX_IPV6))
return -EINVAL;
return 0;
}
+/**
+ * @internal used by rte_pktmbuf_linearize().
+ */
+int __rte_pktmbuf_linearize(struct rte_mbuf *mbuf);
+
/**
* Linearize data in mbuf.
*
static inline int
rte_pktmbuf_linearize(struct rte_mbuf *mbuf)
{
- size_t seg_len, copy_len;
- struct rte_mbuf *m;
- struct rte_mbuf *m_next;
- char *buffer;
-
if (rte_pktmbuf_is_contiguous(mbuf))
return 0;
-
- /* Extend first segment to the total packet length */
- copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
-
- if (unlikely(copy_len > rte_pktmbuf_tailroom(mbuf)))
- return -1;
-
- buffer = rte_pktmbuf_mtod_offset(mbuf, char *, mbuf->data_len);
- mbuf->data_len = (uint16_t)(mbuf->pkt_len);
-
- /* Append data from next segments to the first one */
- m = mbuf->next;
- while (m != NULL) {
- m_next = m->next;
-
- seg_len = rte_pktmbuf_data_len(m);
- rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
- buffer += seg_len;
-
- rte_pktmbuf_free_seg(m);
- m = m_next;
- }
-
- mbuf->next = NULL;
- mbuf->nb_segs = 1;
-
- return 0;
+ return __rte_pktmbuf_linearize(mbuf);
}
/**
*/
void rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len);
+/**
+ * Get the value of mbuf sched queue_id field.
+ */
+static inline uint32_t
+rte_mbuf_sched_queue_get(const struct rte_mbuf *m)
+{
+ return m->hash.sched.queue_id;
+}
+
+/**
+ * Get the value of mbuf sched traffic_class field.
+ */
+static inline uint8_t
+rte_mbuf_sched_traffic_class_get(const struct rte_mbuf *m)
+{
+ return m->hash.sched.traffic_class;
+}
+
+/**
+ * Get the value of mbuf sched color field.
+ */
+static inline uint8_t
+rte_mbuf_sched_color_get(const struct rte_mbuf *m)
+{
+ return m->hash.sched.color;
+}
+
+/**
+ * Get the values of mbuf sched queue_id, traffic_class and color.
+ *
+ * @param m
+ * Mbuf to read
+ * @param queue_id
+ * Returns the queue id
+ * @param traffic_class
+ * Returns the traffic class id
+ * @param color
+ * Returns the colour id
+ */
+static inline void
+rte_mbuf_sched_get(const struct rte_mbuf *m, uint32_t *queue_id,
+ uint8_t *traffic_class,
+ uint8_t *color)
+{
+ struct rte_mbuf_sched sched = m->hash.sched;
+
+ *queue_id = sched.queue_id;
+ *traffic_class = sched.traffic_class;
+ *color = sched.color;
+}
+
+/**
+ * Set the mbuf sched queue_id to the defined value.
+ */
+static inline void
+rte_mbuf_sched_queue_set(struct rte_mbuf *m, uint32_t queue_id)
+{
+ m->hash.sched.queue_id = queue_id;
+}
+
+/**
+ * Set the mbuf sched traffic_class id to the defined value.
+ */
+static inline void
+rte_mbuf_sched_traffic_class_set(struct rte_mbuf *m, uint8_t traffic_class)
+{
+ m->hash.sched.traffic_class = traffic_class;
+}
+
+/**
+ * Set the mbuf sched color id to the defined value.
+ */
+static inline void
+rte_mbuf_sched_color_set(struct rte_mbuf *m, uint8_t color)
+{
+ m->hash.sched.color = color;
+}
+
+/**
+ * Set the mbuf sched queue_id, traffic_class and color.
+ *
+ * @param m
+ * Mbuf to set
+ * @param queue_id
+ * Queue id value to be set
+ * @param traffic_class
+ * Traffic class id value to be set
+ * @param color
+ * Color id to be set
+ */
+static inline void
+rte_mbuf_sched_set(struct rte_mbuf *m, uint32_t queue_id,
+ uint8_t traffic_class,
+ uint8_t color)
+{
+ m->hash.sched = (struct rte_mbuf_sched){
+ .queue_id = queue_id,
+ .traffic_class = traffic_class,
+ .color = color,
+ .reserved = 0,
+ };
+}
+
#ifdef __cplusplus
}
#endif