-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2016 Intel Corporation.
- * Copyright 2014-2016 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation.
+ * Copyright 2014-2016 6WIND S.A.
*/
#ifndef _RTE_MBUF_PTYPE_H_
* RTE_PTYPE_INNER_L4_UDP.
*/
+#include <stddef.h>
+#include <stdint.h>
+
#ifdef __cplusplus
extern "C" {
#endif
* <'ether type'=[0x88A8]>
*/
#define RTE_PTYPE_L2_ETHER_QINQ 0x00000007
+/**
+ * PPPOE packet type.
+ *
+ * Packet format:
+ * <'ether type'=[0x8863|0x8864]>
+ */
+#define RTE_PTYPE_L2_ETHER_PPPOE 0x00000008
+/**
+ * FCoE packet type.
+ *
+ * Packet format:
+ * <'ether type'=[0x8906]>
+ */
+#define RTE_PTYPE_L2_ETHER_FCOE 0x00000009
+/**
+ * MPLS packet type.
+ *
+ * Packet format:
+ * <'ether type'=[0x8847|0x8848]>
+ */
+#define RTE_PTYPE_L2_ETHER_MPLS 0x0000000a
/**
* Mask of layer 2 packet types.
* It is used for outer packet for tunneling cases.
* | 'version'=6, 'next header'!=[6|17|44|132|1]>
*/
#define RTE_PTYPE_L4_NONFRAG 0x00000600
+/**
+ * IGMP (Internet Group Management Protocol) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=2, 'MF'=0, 'frag_offset'=0>
+ */
+#define RTE_PTYPE_L4_IGMP 0x00000700
/**
* Mask of layer 4 packet types.
* It is used for outer packet for tunneling cases.
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
- * | 'destination port'=4798>
+ * | 'destination port'=4789>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
- * | 'destination port'=4798>
+ * | 'destination port'=4789>
*/
#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000
/**
* capability.
*/
#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000
+/**
+ * GTP-C (GPRS Tunnelling Protocol) control tunneling packet type.
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=2123>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=2123>
+ * or,
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'source port'=2123>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'source port'=2123>
+ */
+#define RTE_PTYPE_TUNNEL_GTPC 0x00007000
+/**
+ * GTP-U (GPRS Tunnelling Protocol) user data tunneling packet type.
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=2152>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=2152>
+ */
+#define RTE_PTYPE_TUNNEL_GTPU 0x00008000
+/**
+ * ESP (IP Encapsulating Security Payload) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=51>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=51>
+ */
+#define RTE_PTYPE_TUNNEL_ESP 0x00009000
+/**
+ * L2TP (Layer 2 Tunneling Protocol) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17>
+ * | 'destination port'=1701>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=1701>
+ * or,
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=115>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'protocol'=115>
+ */
+#define RTE_PTYPE_TUNNEL_L2TP 0x0000a000
+/**
+ * VXLAN-GPE (VXLAN Generic Protocol Extension) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=4790>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=4790>
+ */
+#define RTE_PTYPE_TUNNEL_VXLAN_GPE 0x0000b000
+/**
+ * MPLS-in-GRE tunneling packet type (RFC 4023).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47
+ * | 'protocol'=0x8847>
+ * or,
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47
+ * | 'protocol'=0x8848>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'protocol'=47
+ * | 'protocol'=0x8847>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=47
+ * | 'protocol'=0x8848>
+ */
+#define RTE_PTYPE_TUNNEL_MPLS_IN_GRE 0x0000c000
+/**
+ * MPLS-in-UDP tunneling packet type (RFC 7510).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=6635>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=6635>
+ */
+#define RTE_PTYPE_TUNNEL_MPLS_IN_UDP 0x0000d000
/**
* Mask of tunneling packet types.
*/
#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
/**
- * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
- * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can
- * determine if it is an IPV4 packet.
+ * Check if the (outer) L3 header is IPv6. To avoid comparing IPv6 types one by
+ * one, bit 6 is selected to be used for IPv6 only. Then checking bit 6 can
+ * determine if it is an IPV6 packet.
*/
#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)
git.droids-corp.org / dpdk.git / blobdiff