* @warning
* @b EXPERIMENTAL: this API may change without prior notice.
*
- * Dequeue a number of contiquous object blocks from the external pool.
+ * Dequeue a number of contiguous object blocks from the external pool.
*/
typedef int (*rte_mempool_dequeue_contig_blocks_t)(struct rte_mempool *mp,
void **first_obj_table, unsigned int n);
* @param[out] align
* Location for required memory chunk alignment.
* @return
- * Required memory size aligned at page boundary.
+ * Required memory size.
*/
typedef ssize_t (*rte_mempool_calc_mem_size_t)(const struct rte_mempool *mp,
uint32_t obj_num, uint32_t pg_shift,
* that pages are grouped in subsets of physically continuous pages big
* enough to store at least one object.
*
- * Minimum size of memory chunk is a maximum of the page size and total
- * element size.
- *
- * Required memory chunk alignment is a maximum of page size and cache
- * line size.
+ * Minimum size of memory chunk is the total element size.
+ * Required memory chunk alignment is the cache line size.
*/
ssize_t rte_mempool_op_calc_mem_size_default(const struct rte_mempool *mp,
uint32_t obj_num, uint32_t pg_shift,
size_t *min_chunk_size, size_t *align);
-/**
- * @internal Helper function to calculate memory size required to store
- * specified number of objects in assumption that the memory buffer will
- * be aligned at page boundary.
- *
- * Note that if object size is bigger than page size, then it assumes
- * that pages are grouped in subsets of physically continuous pages big
- * enough to store at least one object.
- *
- * @param elt_num
- * Number of elements.
- * @param total_elt_sz
- * The size of each element, including header and trailer, as returned
- * by rte_mempool_calc_obj_size().
- * @param pg_shift
- * LOG2 of the physical pages size. If set to 0, ignore page boundaries.
- * @return
- * Required memory size aligned at page boundary.
- */
-size_t rte_mempool_calc_mem_size_helper(uint32_t elt_num, size_t total_elt_sz,
- uint32_t pg_shift);
-
/**
* Function to be called for each populated object.
*
* Note that the rte_mempool_register_ops fails silently here when
* more than RTE_MEMPOOL_MAX_OPS_IDX is registered.
*/
-#define MEMPOOL_REGISTER_OPS(ops) \
- void mp_hdlr_init_##ops(void); \
- void __attribute__((constructor, used)) mp_hdlr_init_##ops(void)\
- { \
+#define MEMPOOL_REGISTER_OPS(ops) \
+ RTE_INIT(mp_hdlr_init_##ops) \
+ { \
rte_mempool_register_ops(&ops); \
}
rte_mempool_obj_cb_t *obj_init, void *obj_init_arg,
int socket_id, unsigned flags);
-/**
- * @deprecated
- * Create a new mempool named *name* in memory.
- *
- * The pool contains n elements of elt_size. Its size is set to n.
- * This function uses ``memzone_reserve()`` to allocate the mempool header
- * (and the objects if vaddr is NULL).
- * Depending on the input parameters, mempool elements can be either allocated
- * together with the mempool header, or an externally provided memory buffer
- * could be used to store mempool objects. In later case, that external
- * memory buffer can consist of set of disjoint physical pages.
- *
- * @param name
- * The name of the mempool.
- * @param n
- * The number of elements in the mempool. The optimum size (in terms of
- * memory usage) for a mempool is when n is a power of two minus one:
- * n = (2^q - 1).
- * @param elt_size
- * The size of each element.
- * @param cache_size
- * Size of the cache. See rte_mempool_create() for details.
- * @param private_data_size
- * The size of the private data appended after the mempool
- * structure. This is useful for storing some private data after the
- * mempool structure, as is done for rte_mbuf_pool for example.
- * @param mp_init
- * A function pointer that is called for initialization of the pool,
- * before object initialization. The user can initialize the private
- * data in this function if needed. This parameter can be NULL if
- * not needed.
- * @param mp_init_arg
- * An opaque pointer to data that can be used in the mempool
- * constructor function.
- * @param obj_init
- * A function called for each object at initialization of the pool.
- * See rte_mempool_create() for details.
- * @param obj_init_arg
- * An opaque pointer passed to the object constructor function.
- * @param socket_id
- * The *socket_id* argument is the socket identifier in the case of
- * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
- * constraint for the reserved zone.
- * @param flags
- * Flags controlling the behavior of the mempool. See
- * rte_mempool_create() for details.
- * @param vaddr
- * Virtual address of the externally allocated memory buffer.
- * Will be used to store mempool objects.
- * @param iova
- * Array of IO addresses of the pages that comprises given memory buffer.
- * @param pg_num
- * Number of elements in the iova array.
- * @param pg_shift
- * LOG2 of the physical pages size.
- * @return
- * The pointer to the new allocated mempool, on success. NULL on error
- * with rte_errno set appropriately. See rte_mempool_create() for details.
- */
-__rte_deprecated
-struct rte_mempool *
-rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size,
- unsigned cache_size, unsigned private_data_size,
- rte_mempool_ctor_t *mp_init, void *mp_init_arg,
- rte_mempool_obj_cb_t *obj_init, void *obj_init_arg,
- int socket_id, unsigned flags, void *vaddr,
- const rte_iova_t iova[], uint32_t pg_num, uint32_t pg_shift);
-
/**
* Create an empty mempool
*
rte_iova_t iova, size_t len, rte_mempool_memchunk_free_cb_t *free_cb,
void *opaque);
-__rte_deprecated
-int rte_mempool_populate_phys(struct rte_mempool *mp, char *vaddr,
- phys_addr_t paddr, size_t len, rte_mempool_memchunk_free_cb_t *free_cb,
- void *opaque);
-
-/**
- * @deprecated
- * Add physical memory for objects in the pool at init
- *
- * Add a virtually contiguous memory chunk in the pool where objects can
- * be instantiated. The IO addresses corresponding to the virtual
- * area are described in iova[], pg_num, pg_shift.
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param vaddr
- * The virtual address of memory that should be used to store objects.
- * @param iova
- * An array of IO addresses of each page composing the virtual area.
- * @param pg_num
- * Number of elements in the iova array.
- * @param pg_shift
- * LOG2 of the physical pages size.
- * @param free_cb
- * The callback used to free this chunk when destroying the mempool.
- * @param opaque
- * An opaque argument passed to free_cb.
- * @return
- * The number of objects added on success.
- * On error, the chunks are not added in the memory list of the
- * mempool and a negative errno is returned.
- */
-__rte_deprecated
-int rte_mempool_populate_iova_tab(struct rte_mempool *mp, char *vaddr,
- const rte_iova_t iova[], uint32_t pg_num, uint32_t pg_shift,
- rte_mempool_memchunk_free_cb_t *free_cb, void *opaque);
-
-__rte_deprecated
-int rte_mempool_populate_phys_tab(struct rte_mempool *mp, char *vaddr,
- const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
- rte_mempool_memchunk_free_cb_t *free_cb, void *opaque);
-
/**
* Add virtually contiguous memory for objects in the pool at init
*
* A pointer to the mempool structure.
* @param addr
* The virtual address of memory that should be used to store objects.
- * Must be page-aligned.
* @param len
- * The length of memory in bytes. Must be page-aligned.
+ * The length of memory in bytes.
* @param pg_sz
* The size of memory pages in this virtual area.
* @param free_cb
&cache->objs[cache->len], req);
if (unlikely(ret < 0)) {
/*
- * In the offchance that we are buffer constrained,
+ * In the off chance that we are buffer constrained,
* where we are not able to allocate cache + n, go to
* the ring directly. If that fails, we are truly out of
* buffers.
return hdr->iova;
}
-__rte_deprecated
-static inline phys_addr_t
-rte_mempool_virt2phy(__rte_unused const struct rte_mempool *mp, const void *elt)
-{
- return rte_mempool_virt2iova(elt);
-}
-
/**
* Check the consistency of mempool objects.
*
uint32_t rte_mempool_calc_obj_size(uint32_t elt_size, uint32_t flags,
struct rte_mempool_objsz *sz);
-/**
- * @deprecated
- * Get the size of memory required to store mempool elements.
- *
- * Calculate the maximum amount of memory required to store given number
- * of objects. Assume that the memory buffer will be aligned at page
- * boundary.
- *
- * Note that if object size is bigger than page size, then it assumes
- * that pages are grouped in subsets of physically continuous pages big
- * enough to store at least one object.
- *
- * @param elt_num
- * Number of elements.
- * @param total_elt_sz
- * The size of each element, including header and trailer, as returned
- * by rte_mempool_calc_obj_size().
- * @param pg_shift
- * LOG2 of the physical pages size. If set to 0, ignore page boundaries.
- * @param flags
- * The mempool flags.
- * @return
- * Required memory size aligned at page boundary.
- */
-__rte_deprecated
-size_t rte_mempool_xmem_size(uint32_t elt_num, size_t total_elt_sz,
- uint32_t pg_shift, unsigned int flags);
-
-/**
- * @deprecated
- * Get the size of memory required to store mempool elements.
- *
- * Calculate how much memory would be actually required with the given
- * memory footprint to store required number of objects.
- *
- * @param vaddr
- * Virtual address of the externally allocated memory buffer.
- * Will be used to store mempool objects.
- * @param elt_num
- * Number of elements.
- * @param total_elt_sz
- * The size of each element, including header and trailer, as returned
- * by rte_mempool_calc_obj_size().
- * @param iova
- * Array of IO addresses of the pages that comprises given memory buffer.
- * @param pg_num
- * Number of elements in the iova array.
- * @param pg_shift
- * LOG2 of the physical pages size.
- * @param flags
- * The mempool flags.
- * @return
- * On success, the number of bytes needed to store given number of
- * objects, aligned to the given page size. If the provided memory
- * buffer is too small, return a negative value whose absolute value
- * is the actual number of elements that can be stored in that buffer.
- */
-__rte_deprecated
-ssize_t rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num,
- size_t total_elt_sz, const rte_iova_t iova[], uint32_t pg_num,
- uint32_t pg_shift, unsigned int flags);
-
/**
* Walk list of all memory pools
*
void rte_mempool_walk(void (*func)(struct rte_mempool *, void *arg),
void *arg);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * @internal Get page size used for mempool object allocation.
+ * This function is internal to mempool library and mempool drivers.
+ */
+__rte_experimental
+int
+rte_mempool_get_page_size(struct rte_mempool *mp, size_t *pg_sz);
+
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff