-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# Copyright 2015 6WIND S.A.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation.
+# Copyright 2015 6WIND S.A.
# Configuration, compilation and installation can be done at once
# with make install T=<config>
kerneldir ?= $(prefix)/kmod
else
ifeq ($(RTE_EXEC_ENV),linuxapp)
-kerneldir ?= /lib/modules/$(shell uname -r)/extra/dpdk
+RTE_EXEC_ENV=linux
+endif
+ifeq ($(RTE_EXEC_ENV),linux)
+kerneldir ?= $(RTE_KERNELDIR:/build=/extra/dpdk)
else
kerneldir ?= /boot/modules
endif
datarootdir ?= $(prefix)/share
docdir ?= $(datarootdir)/doc/dpdk
datadir ?= $(datarootdir)/dpdk
+mandir ?= $(datarootdir)/man
sdkdir ?= $(datadir)
targetdir ?= $(datadir)/$(RTE_TARGET)
# Create the relative symbolic link $2 -> $1
# May be replaced with --relative option of ln from coreutils-8.16
-rte_symlink = ln -snf $$($(RTE_SDK)/scripts/relpath.sh $1 $(dir $2)) $2
+rte_symlink = ln -snf $$($(RTE_SDK)/buildtools/relpath.sh $1 $(dir $2)) $2
.PHONY: pre_install
pre_install:
@echo Installation in $(DESTDIR)$(prefix)/ complete
endif
+# when installing we want recursive copies preserving timestamps only, no
+# preservation of user/group ids or permissions
+CP_FLAGS=-dR --preserve=timestamps
+TAR_X_FLAGS=--strip-components=1 --keep-newer-files --no-same-owner --no-same-permissions
+
install-runtime:
$(Q)$(call rte_mkdir, $(DESTDIR)$(libdir))
- $(Q)cp -a $O/lib/* $(DESTDIR)$(libdir)
+ $(Q)cp $(CP_FLAGS) $O/lib/* $(DESTDIR)$(libdir)
$(Q)$(call rte_mkdir, $(DESTDIR)$(bindir))
$(Q)tar -cf - -C $O --exclude 'app/*.map' \
- --exclude app/pmdinfogen \
+ --exclude app/dpdk-pmdinfogen \
--exclude 'app/cmdline*' --exclude app/test \
--exclude app/testacl --exclude app/testpipeline app | \
- tar -xf - -C $(DESTDIR)$(bindir) --strip-components=1 \
- --keep-newer-files --warning=no-ignore-newer
- $(Q)$(call rte_mkdir, $(DESTDIR)$(datadir))
- $(Q)cp -a $(RTE_SDK)/tools $(DESTDIR)$(datadir)
+ tar -xf - -C $(DESTDIR)$(bindir) $(TAR_X_FLAGS)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(datadir)/usertools)
+ $(Q)tar -cf - -C $(RTE_SDK) --exclude meson.build usertools | \
+ tar -xf - -C $(DESTDIR)$(datadir)/usertools $(TAR_X_FLAGS)
$(Q)$(call rte_mkdir, $(DESTDIR)$(sbindir))
- $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/tools/dpdk_nic_bind.py, \
- $(DESTDIR)$(sbindir)/dpdk_nic_bind)
- $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/tools/pmdinfo.py, \
- $(DESTDIR)$(bindir)/dpdk_pmdinfo)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/usertools/dpdk-devbind.py, \
+ $(DESTDIR)$(sbindir)/dpdk-devbind)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/usertools/dpdk-pmdinfo.py, \
+ $(DESTDIR)$(bindir)/dpdk-pmdinfo)
+ifneq ($(wildcard $O/doc/man/*/*.1),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(mandir)/man1)
+ $(Q)cp $(CP_FLAGS) $O/doc/man/*/*.1 $(DESTDIR)$(mandir)/man1
+endif
+ifneq ($(wildcard $O/doc/man/*/*.8),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(mandir)/man8)
+ $(Q)cp $(CP_FLAGS) $O/doc/man/*/*.8 $(DESTDIR)$(mandir)/man8
+endif
install-kmod:
ifneq ($(wildcard $O/kmod/*),)
$(Q)$(call rte_mkdir, $(DESTDIR)$(kerneldir))
- $(Q)cp -a $O/kmod/* $(DESTDIR)$(kerneldir)
+ $(Q)cp $(CP_FLAGS) $O/kmod/* $(DESTDIR)$(kerneldir)
endif
install-sdk:
$(Q)$(call rte_mkdir, $(DESTDIR)$(includedir))
$(Q)tar -chf - -C $O include | \
- tar -xf - -C $(DESTDIR)$(includedir) --strip-components=1 \
- --keep-newer-files --warning=no-ignore-newer
+ tar -xf - -C $(DESTDIR)$(includedir) $(TAR_X_FLAGS)
$(Q)$(call rte_mkdir, $(DESTDIR)$(sdkdir))
- $(Q)cp -a $(RTE_SDK)/mk $(DESTDIR)$(sdkdir)
- $(Q)cp -a $(RTE_SDK)/scripts $(DESTDIR)$(sdkdir)
+ $(Q)cp $(CP_FLAGS) $(RTE_SDK)/mk $(DESTDIR)$(sdkdir)
+ $(Q)cp $(CP_FLAGS) $(RTE_SDK)/buildtools $(DESTDIR)$(sdkdir)
$(Q)$(call rte_mkdir, $(DESTDIR)$(targetdir)/app)
- $(Q)cp -a $O/.config $(DESTDIR)$(targetdir)
- $(Q)cp -a $O/app/pmdinfogen $(DESTDIR)$(targetdir)/app
+ $(Q)cp $(CP_FLAGS) $O/.config $(DESTDIR)$(targetdir)
+ $(Q)cp $(CP_FLAGS) $O/app/dpdk-pmdinfogen $(DESTDIR)$(targetdir)/app
$(Q)$(call rte_symlink, $(DESTDIR)$(includedir), $(DESTDIR)$(targetdir)/include)
$(Q)$(call rte_symlink, $(DESTDIR)$(libdir), $(DESTDIR)$(targetdir)/lib)
install-doc:
-ifneq ($(wildcard $O/doc),)
+ifneq ($(wildcard $O/doc/html),)
$(Q)$(call rte_mkdir, $(DESTDIR)$(docdir))
- $(Q)tar -cf - -C $O/doc html --exclude 'html/guides/.*' | \
- tar -xf - -C $(DESTDIR)$(docdir) --strip-components=1 \
- --keep-newer-files --warning=no-ignore-newer
+ $(Q)tar -cf - -C $O/doc --exclude 'html/guides/.*' html | \
+ tar -xf - -C $(DESTDIR)$(docdir) $(TAR_X_FLAGS)
endif
ifneq ($(wildcard $O/doc/*/*/*pdf),)
$(Q)$(call rte_mkdir, $(DESTDIR)$(docdir)/guides)
- $(Q)cp -a $O/doc/*/*/*pdf $(DESTDIR)$(docdir)/guides
+ $(Q)cp $(CP_FLAGS) $O/doc/*/*/*pdf $(DESTDIR)$(docdir)/guides
endif
$(Q)$(call rte_mkdir, $(DESTDIR)$(datadir))
- $(Q)cp -a $(RTE_SDK)/examples $(DESTDIR)$(datadir)
+ $(Q)cp $(CP_FLAGS) $(RTE_SDK)/examples $(DESTDIR)$(datadir)
git.droids-corp.org / dpdk.git / blobdiff