git.droids-corp.org - dpdk.git/log

net/i40e: fix flow director config after flow validate

The configuration of FDIR input set should not be set
during flow validate. It should be set when flow create.

Fixes: fe5d0e85b713 ("net/i40e: fix flow director flex configuration")
Fixes: 15018d79f0be ("net/i40e: add FDIR support for GTP-C and GTP-U")
Cc: stable@dpdk.org
Signed-off-by: Murphy Yang <murphyx.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

raw/ifpga/base: check null pointer

In init_sec_mgr(), pointer "hw" may be NULL, so "hw" should
be checked before dereferencing.

Coverity issue: 367483
Fixes: a05bd1b40bde ("raw/ifpga: add FPGA RSU APIs")

Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: check file length

In fpga_update_flash(), "smgr->rsu_length" is passed to a
parameter that cannot be negative. So return value of
function "lseek" should be checked before being assigned
to "smgr->rsu_length".

Coverity issue: 367481
Fixes: a05bd1b40bde ("raw/ifpga: add FPGA RSU APIs")

Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: check lseek failure

In write_flash_image(), calling function "lseek" without checking
return value has risk. Negative return value should be handled as
an error condition.

Coverity issue: 367478
Fixes: a05bd1b40bde ("raw/ifpga: add FPGA RSU APIs")

Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

doc: update recommended versions for i40e

Kernel driver 2.13.10 is removed, so update recommended matching list
for i40e.

Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/e1000: fix Rx error counter for bad length

When the size of a packet in Rx channel is less than the minimum
or greater than the maximum, the packet will be simultaneously
counted by RLEC(Receive Length Error Count) and
RUC(Receive Under Size Count)/ROC(Receive Oversize Count) registers.

This patch fixes the issue of counting a length error packet twice
when counting the total number of received error packets.

Fixes: 70bdb18657da ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>

net/igc: fix Rx error counter for bad length

When the size of a packet in Rx channel is less than the minimum
or greater than the maximum, the packet will be simultaneously
counted by RLEC(Receive Length Error Count) and
RUC(Receive Under Size Count)/ROC(Receive Oversize Count) registers.

This patch fixes the issue of counting a length error packet twice
when counting the total number of received error packets.

Fixes: e6defdfddc3b ("net/igc: enable statistics")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>

net/ena: fix releasing Tx ring mbufs

When ena_tx_queue_release_bufs() frees the mbufs it does not clear
the mbuf pointers. So, when the device starts and stops multiple
times it can cause the application to receive duplicate mbufs for
two different packets. Fix the issue by clearing the mbuf pointer.

Also, while tracking down the "double free" issue the ena calls to
allocate and free mbufs in bulk were migrated to the mbuf based APIs
so the common mbuf alloc/free routines are exercised.

Fixes: 79405ee17585 ("net/ena: fix out of order completion")
Fixes: 1173fca25af9 ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>

net/ice: disable DDP package on Windows

Disable loading of external DDP package as it is not
supported on Windows.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ice: build on Windows

- Add Intel ice PMD support on Windows.
- Remove #include sys/ioctl header file as it is not needed.
- Replace x86intrin.h with rte_vect.h to avoid __m_prefetchw conflicting
  types.
- Replace POSIX usleep() API with rte API.
- Add a new macro for the access() API as the original function
  has been deprecated on Windows.
- Add extra cflags '-fno-asynchronous-unwind-tables'
  to avoid MinGW build error:
  Error: invalid register for .seh_savexmm
- Add documentation to support ice PMD on Windows.
  Update the release notes and features list for the same.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

common/iavf: build on Windows

Enable IAVF driver to build on Windows as it is required
to build ice PMD.
Disable all other drivers from common directory.

This patch also includes fix for a macro redefinition warning
in the IAVF driver.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/hns3: update HiSilicon copyright syntax

According to the suggestion of our legal department,
to standardize the copyright license of our code to
avoid potential copyright risks, we make a unified
modification to the "Hisilicon", which was nonstandard,
in the main modules we maintain.

We change it to "HiSilicon", which is consistent with
the terms used on the following official website:
https://www.hisilicon.com/en/terms-of-use.

Fixes: 565829db8b8f ("net/hns3: add build and doc infrastructure")
Fixes: 952ebacce4f2 ("net/hns3: support SVE Rx")
Fixes: e31f123db06b ("net/hns3: support NEON Tx")
Fixes: c09c7847d892 ("net/hns3: support traffic management")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>

net/hns3: support IEEE 1588 PTP

Add hns3 support for new ethdev APIs to enable and read IEEE1588/
802.1AS PTP timestamps.

Signed-off-by: Min Hu (Connor) <humin29@huawei.com>

net/hns3: fix MTU config complexity

This patch fixed cyclomatic complexity about MTU
in device configure process.

Fixes: 1f5ca0b460cd ("net/hns3: support some device operations")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>

net/igc: refine debug build option

1. replace RTE_LIBRTE_IGC_DEBUG_RX with RTE_ETHDEV_DEBUG_RX.
2. replace RTE_LIBRTE_IGC_DEBUG_TX with RTE_ETHDEV_DEBUG_TX.
3. merge RTE_LIBRTE_ETHDEV_DEBUG into RTE_ETHDEV_DEBUG_TX

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ixgbe: refine debug build option

1. replace RTE_LIBRTE_IXGBE_DEBUG_RX with RTE_ETHDEV_DEBUG_RX.
2. replace RTE_LIBRTE_IXGBE_DEBUG_TX with RTE_ETHDEV_DEBUG_TX.
3. merge RTE_LIBRTE_IXGBE_DEBUG_TX_FREE and RTE_LIBRTE_ETHDEV_DEBUG
into RTE_ETHDEV_DEBUG_TX

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ice: refine debug build option

1. replace RTE_LIBRTE_ICE_DEBUG_RX with RTE_ETHDEV_DEBUG_RX.
2. replace RTE_LIBRTE_ICE_DEBUG_TX with RTE_ETHDEV_DEBUG_TX.
3. merge RTE_LIBRTE_ICE_DEBUG_TX_FREE and RTE_LIBRTE_ETHDEV_DEBUG
into RTE_LIBRTE_DEBUG_TX

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/iavf: refine debug build option

1. replace RTE_LIBRTE_IAVF_DEBUG_RX with RTE_ETHDEV_DEBUG_RX.
2. replace RTE_LIBRTE_IAVF_DEBUG_TX with RTE_ETHDEV_DEBUG_TX.
3. merge RTE_LIBRTE_IAVF_DEBUG_TX_FREE and RTE_LIBRTE_ETHDEV_DEBUG
into RTE_ETHDEV_DEBUG_TX

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/i40e: refine debug build option

1. replace RTE_LIBRTE_I40E_DEBUG_RX with RTE_ETHDEV_DEBUG_RX.
2. replace RTE_LIBRTE_I40E_DEBUG_TX with RTE_ETHDEV_DEBUG_TX.
3. merge RTE_LIBRTE_I40E_DEBUG_TX_FREE and RTE_LIBRTE_ETHDEV_DEBUG
into RTE_ETHDEV_DEBUG_TX

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/e1000: refine debug build option

1. replace RTE_LIBRTE_E1000_DEBUG_RX with RTE_ETHDEV_DEBUG_RX.
2. replace RTE_LIBRTE_E1000_DEBUG_TX with RTE_ETHDEV_DEBUG_TX.
3. merge RTE_LIBRTE_E1000_DEBUG_TX_FREE and RTE_LIBRTE_ETHDEV_DEBUG
into RTE_ETHDEV_DEBUG_TX

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/fm10k: refine debug build option

1. replace RTE_LIBRTE_FM10K_DEBUG_RX with RTE_ETHDEV_DEBUG_RX.
2. replace RTE_LIBRTE_FM10K_DEBUG_TX with RTE_ETHDEV_DEBUG_TX.
3. merge RTE_LIBRTE_FM10K_DEBUG_TX_FREE and RTE_LIBRTE_ETHDEV_DEBUG
into RTE_ETHDEV_DEBUG_TX

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

ethdev: refine debug build option

PMDs use RTE_LIBRTE_<PMD_NAME>_DEBUG_RX|TX as build option to wrap
data path debug code. As .config has been removed since the meson build,
It is not friendly for new DPDK users to notice those debug options.

The patch introduces below build options for data path debug, so PMD
can choose to reuse them to avoid maintain their own.

- RTE_ETHDEV_DEBUG_RX
- RTE_ETHDEV_DEBUG_TX

All the build options are documented at programming guide
"3.1 Driver Option", so users can easily find them.

The original undocumented RTE_LIBRTE_ETHDEV_DEBUG will alias to
both RTE_ETHDEV_DEBUG_RX and RTE_ETHDEV_DEBUG_TX for backward
compatibility.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

drivers/net: remove useless autoneg capability

The flag ETH_LINK_SPEED_AUTONEG is 0,
so it cannot be used in a capability bitmap.

Having 0 in speed capability means all speeds are accepted.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: add sampling and mirroring in testpmd guide

Update documentation for sample action usage in testpmd and
show the command line example.

Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

mempool/cnxk: add cn10k batch dequeue

Add the implementation for Marvell CN10k mempool batch dequeue op.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add cn10k get count

Add the implementation for Marvell CN10k get count op.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add cn10k batch enqueue

Add the implementation for Marvell CN10k mempool batch enqueue op.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add batch operation init

Marvell CN10k mempool supports batch enqueue/dequeue which can
dequeue up to 512 pointers and enqueue up to 15 pointers using
a single instruction.

These batch operations require a DMA memory to enqueue/dequeue
pointers. This patch adds the initialization of this DMA memory.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add cn10k mempool operations

Add Marvell CN10k mempool ops and implement CN10k mempool alloc.

CN10k has 64 bytes L1D cache line size. Hence the CN10k mempool
alloc does not make the element size an odd multiple L1D cache
line size as NPA requires the element sizes to be multiples of
128 bytes.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add cn9k optimized enqueue/dequeue

Add Marvell CN9k mempool enqueue/dequeue. Marvell CN9k
supports burst dequeue which allows to dequeue up to 32
pointers using pipelined casp instructions.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add cn9k mempool operations

Add Marvell CN9k mempool ops and implement CN9k mempool
alloc which makes sure that the element size always occupy
odd number of cachelines to ensure even distribution among
of elements among L1D cache sets.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: register plt init callback

Register the CNXk mempool plt init callback which will set the
appropriate mempool ops to be used for the platform.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add generic operations

Add generic CNXk mempool ops which will enqueue/dequeue
from pool one element at a time.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add device probe/remove

Add the implementation for CNXk mempool device
probe and remove.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

mempool/cnxk: add build infra and doc

Add the meson based build infrastructure for Marvell
CNXK mempool driver along with stub implementations
for mempool device probe.

Also add Marvell CNXK mempool base documentation.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>

common/cnxk: support RSS action in NPC rule

Added support for allocating RSS group and setting
it as action of an NPC rule.

Signed-off-by: Satheesh Paul <psatheesh@marvell.com>

common/cnxk: support TIM IRQ

Add TIM LF IRQ register and un-register functions.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support TIM device

Add TIM device init, fini which are used to attach TIM LF
resources to the RVU PF/VF and TIM LF alloc and free.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support SSO debug

Add sso debug dump support. This dumps all SSO LF register values
to a given file handle.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support SSO IRQ

Add support to registering and un-registering SSO HWS and
HWGRP IRQs.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add SSO HWGRP interface

Add SSO HWGRP interface for configuring XAQ pool, setting priority
and internal HW buffer limits for each HWGRP.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add SSO HWS interface

Add SSO HWS interface for setting/unsetting links, retrieving
base address and nanoseconds to getwork timeout.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support SSO device

Add SSO device init and fini which attach SSO LF resources to the
RVU PF/VF and SSO HWS and HWGRP LFs alloc, free.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NPC init and fini

Adding support initialize and fini the npc. Further, adding APIs to
create and destroy the npc rules.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>

common/cnxk: add NPC parsing API

Adding npc parsing API support to parse different patterns and actions.
Based on the pattern and actions ltype values will be chosen and
mcam data will be configured at perticular offsets.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>

common/cnxk: add mcam utility API

Adding mcam utility functions like reading KEX and reserving and writing
mcam rules.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>

common/cnxk: add NPC helper API

Adding NPC helper APIs to manage MCAM like pre allocating the mcam,
configuring the rules, shifting mcam rules and preparing the data for
mcam based on KEX.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>

common/cnxk: support NPC

Adding initial support for programming NPC. NPC is Network Parser
and CAM unit that provides Rx and Tx packet parsing and packet
manipulation functionality on Marvell CN9K and CN10K SoC's. It is
mapped to RTE Flow in DPDK.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>

common/cnxk: support NIX TM debug and misc utils

Add support to dump TM HW registers and hierarchy on error.
This patch also adds support for misc utils such as API to
query TM HW resource availability, resource pre-allocation
and static priority support on root node.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX TM dynamic update

Add support for dynamic node update of shaper profile,
RR quantum and also support to suspend or resume an active
TM node.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX TM internal hierarchy

Add support to create internal TM default hierarchy and ratelimit
hierarchy and API to ratelimit SQ to a given rate. This will be
used by cnxk ethdev driver's tx queue ratelimit op.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NIX TM hierarchy enable/disable

Add support to enable or disable hierarchy along with
allocating node HW resources such as shapers and schedulers
and configuring them to match the user created or default
hierarchy.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NIX TM helper to alloc/free resource

Add TM helper API to estimate, alloc, assign, and free resources
for a NIX LF / ethdev.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX TM shaper profile

Add support to add/delete/update shaper profile for
a given NIX. Also add support to walk through existing
shaper profiles.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>

common/cnxk: support add/delete NIX TM node

Add support to add/delete nodes in a hierarchy.
This patch also adds misc utils to get node name,
walk through nodes etc.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>

common/cnxk: support NIX traffic management

Add nix traffic management base support to init/fini node, shaper profile
and topology, setup SQ for a given user hierarchy or default internal
hierarchy.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX LSO and misc utils

Add support to create LSO formats for TCP segmentation offload
for IPv4/IPv6, tunnel and non-tunnel protocols. Tunnel protocol
support is for GRE and UDP based tunnel protocols.

This patch also adds other helper API to retrieve eeprom info
and configure Rx for different switch headers.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX flow control

Add support to enable/disable Rx/Tx flow control and pause
frame configuration on NIX.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: suport VLAN filter

Add helper API to support VLAN filtering and stripping
on Rx and VLAN insertion on Tx.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX debug dump

Add support to dump NIX RQ, SQ and CQ contexts apart
from NIX LF registers.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX extended stats

Add support for retrieving NIX extended stats that are
per NIX LF and per LMAC.

Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX stats

Add API to provide Rx and Tx stats for a given NIX.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX PTP

Add support to enable/disable Rx and Tx PTP timestamping
support. Also provide API's to register ptp info callbacks
to get config change update from Kernel.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX RSS

Add API's for default/non-default reta table setup,
key set/get, and flow algo setup for CN9K and CN10K.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NIX inline IPsec config API

Add API to configure NIX block for inline IPSec.

Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NIX specific NPC operations

Add NIX specific NPC operations such as NPC mac address get/set,
mcast entry add/delete, promiscuous mode enable/disable etc.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX MAC operations

Add support to different MAC related operations such as
MAC address set/get, link set/get, link status callback,
etc.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NIX Tx queue management API

This patch adds support to init/modify/fini NIX
SQ(send queue) for both CN9K and CN10K platforms.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NIX Rx queue management API

Add nix Rx queue management API to init/modify/fini
RQ context and also setup CQ(completion queue) context.
Current support is both for CN9K and CN10K devices.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NIX IRQ

Add support to register NIX error and completion
queue IRQ's using base device class IRQ helper API's.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>

common/cnxk: support NIX

Add base nix support as ROC(Rest of Chip) API which will
be used by generic ETHDEV PMD(net/cnxk).

This patch adds support to device init, fini, resource
alloc and free API which sets up a ETHDEV PCI device of either
CN9K or CN10K Marvell SoC.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>

common/cnxk: support NPA batch alloc/free

Add APIs to do allocations/frees in batch from
NPA pool.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NPA performance counter

Add APIs to read NPA performance counters.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NPA bulk alloc/free

Add APIs to alloc/free in bulk from NPA pool.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add NPA pool HW operations

Add APIs for creating, destroying, modifying
NPA pools.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NPA debug

Add NPA debug APIs.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NPA IRQ

Add support for NPA IRQs.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: support NPA device

Add base NPA device support. NPA i.e Network Pool Allocator is
HW block that provides HW mempool functionality on Marvell CN9K
and CN10K SoC's. NPA by providing HW mempool support, also
facilitates Rx and Tx packet alloc and packet free by HW without
SW intervention.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add VF support to base device class

Add VF specific handling such as BAR4 setup, forwarding
VF mbox messages to AF and vice-versa, VF FLR handling
etc.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add base device class

Introduce 'dev' class to hold cnxk PCIe device specific
information and operations.

All PCIe drivers(ethdev, mempool, cryptodev and eventdev) of cnxk
inherits this base object to avail the common functionalities such
as mailbox creation, interrupt registration, LMT setup, VF message
mbox forwarding, etc.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add mailbox base infrastructure

This patch adds mailbox infra API's to communicate with Kernel AF
driver. These API's will be used by all the other cnxk drivers
for mbox init/fini, send/recv functionality.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add mbox request and response definitions

The admin function driver sits in Linux kernel as mailbox
server. The DPDK AF mailbox client, send the message to mailbox
server to complete the administrative task such as get mac
address.

This patch adds mailbox request and response definition of
existing mailbox defined between AF driver and DPDK driver.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>

common/cnxk: add interrupt helper API

Add interrupt helper API's in common code to register and
unregister for specific interrupt vectors. These API's
will be used by all cnxk drivers.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add roc plt init callback support

Add support for registering callbacks for roc plt init.

Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add model init and IO handling API

Add routines for SoC model identification and HW IO handling
routines specific to CN9K and CN10K Marvell SoC's.
These are based on arm64 ISA and behaviour specific to
Marvell SoC's.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Srikanth Yalavarthi <syalavarthi@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

common/cnxk: add build infrastructre and HW definition

Add meson build infrastructure along with HW definition
header file.

This patch also adds cross-compile configs for arm
for CN9K series and CN10K series of Marvell SoC's.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>

doc: add Marvell cnxk platform guide

Platform specific guide for Marvell OCTEON CN9K/CN10K SoC is added.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>

build: alias default build as generic

The current machine='default' build name is not descriptive. The actual
default build is machine='native'. Add an alternative string which does
the same build and better describes what we're building:
machine='generic'. Leave machine='default' for backwards compatibility.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

build: limit symbol checks to developer mode

The checking of symbols within each library and driver is only of
interest to developers, so limit to developer mode only.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

build: hide debug messages in non-developer mode

The messages about what components have what dependency names, and
information about function versioning not being supported on windows are
only of interest to developers, so hide them when building in
non-developer mode.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

build: enable a developer mode setting

To allow support for additional build checks and tests only really
relevant for developers, we add support for a developer mode option to
DPDK. The default, "auto", value for this enables developer mode if a
".git" folder is found at the root of the source tree - as was the case
with the previous "make" build system. There is also support for
explicitly enabling or disabling this option using "meson configure" if
so desired.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

eal: fix hang in control thread creation

The affinity of a control thread is set after it has been launched. If
setting the affinity fails, pthread_cancel is called followed by a call
to pthread_join, which can hang forever if the thread's start routine
doesn't call a pthread cancellation point.

This patch modifies the logic so that the control thread exits
gracefully if the affinity cannot be set successfully and removes the
call to pthread_cancel.

Fixes: 6383d2642b62 ("eal: set name when creating a control thread")
Cc: stable@dpdk.org
Signed-off-by: Luc Pelletier <lucp.at.work@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

eal: fix race in control thread creation

The creation of control threads uses a pthread barrier for
synchronization. This patch fixes a race condition where the pthread
barrier could get destroyed while one of the threads has not yet
returned from the pthread_barrier_wait function, which could result in
undefined behaviour.

Fixes: 3a0d465d4c53 ("eal: fix use-after-free on control thread creation")
Cc: stable@dpdk.org
Signed-off-by: Luc Pelletier <lucp.at.work@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

vfio: reformat logs

The log messages had various issues:
- split on 2 lines, making search (grep) difficult
- long lines (can be split after the string)
- indented for no good reason (parent message may have higher log level)
- inconsistent use of __func__, not meaningful context for user
- lack of context (general message not mentioning VFIO)
- log level too high (more below)

Message having its level decreased from WARNING to NOTICE:
"not managed by VFIO driver, skipping"
Message having its level decreased from INFO to DEBUG:
"Probing VFIO support..."

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

app/testpmd: fix usage text

The options help text was including an incomplete and redundant
summary of the options before explaining each. The summary is dropped.

The details of the option --hairpin-mode had an extra space,
breaking the alignment with the next line.

There were some mismatches between options in the usage text
sed -rn 's/.*\(" *--([a-z-]*)[=: ].*/\1/p' app/test-pmd/parameters.c
and the options declared in lgopts array
sed -rn 's/.*\{.*"(.*)",.*,.*,.*},.*/\1/p' app/test-pmd/parameters.c
The misses were:
--no-numa
--enable-scatter
--tx-ip
--tx-udp
--noisy-lkup-num-reads-writes
The option --ports was not implemented.

Fixes: 01817b10d27c ("app/testpmd: change hairpin queues setup")
Fixes: 3c156061b938 ("app/testpmd: add noisy neighbour forwarding mode")
Fixes: bf5b2126bf44 ("app/testpmd: add ability to set Tx IP and UDP parameters")
Fixes: 0499793854f5 ("app/testpmd: add scatter enabling option")
Fixes: 999b2ee0fe45 ("app/testpmd: enable NUMA support by default")
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Bing Zhao <bingz@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>

app/regex: fix usage text

The usage syntax help includes the program name which was fake.
It is replaced with the real name from argv.

Fixes: de06137cb295 ("app/regex: add RegEx test application")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>

app: fix exit messages

Some applications were printing useless messages with rte_exit()
after showing the help. Using exit() is enough in this case.

Some applications were using a redundant printf or fprintf() before
calling rte_exit(). The messages are unified in a single rte_exit().

Some rte_exit() calls were missing a line feed or returning a wrong code.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>

eal: fix evaluation of log level option

--log-level option is handled early, no need to reevaluate it later in
EAL init.

Before:
$ echo quit | ./build/app/test/dpdk-test --no-huge -m 512 \
  --log-level=lib.eal:debug \
  --log-level=lib.ethdev:debug --log-level=lib.ethdev:info \
  |& grep -i log.level

EAL: lib.eal log level changed from info to debug
EAL: lib.ethdev log level changed from info to debug
EAL: lib.ethdev log level changed from debug to info
EAL: lib.ethdev log level changed from info to debug
EAL: lib.ethdev log level changed from debug to info
EAL: lib.telemetry log level changed from disabled to warning

After:
$ echo quit | ./build/app/test/dpdk-test --no-huge -m 512 \
  --log-level=lib.eal:debug \
  --log-level=lib.ethdev:debug --log-level=lib.ethdev:info \
  |& grep -i log.level

EAL: lib.eal log level changed from info to debug
EAL: lib.ethdev log level changed from info to debug
EAL: lib.ethdev log level changed from debug to info
EAL: lib.telemetry log level changed from disabled to warning

Fixes: 6c7216eefd63 ("eal: fix log level of early messages")
Fixes: 1c806ae5c3ac ("eal/windows: support command line options parsing")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>

log: track log level changes

Add a log message when registering log types and changing log levels.

__rte_log_register previous handled both legacy and dynamic logtypes.
To simplify the code, __rte_log_register is reworked to only handle
dynamic logtypes and takes a log level.

Example:
$ DPDK_TEST=logs_autotest ./build/app/test/dpdk-test --no-huge -m 512 \
--log-level=lib.eal:debug
...
RTE>>logs_autotest
== dynamic log types
EAL: logtype1 log level changed from disabled to info
EAL: logtype2 log level changed from disabled to info
EAL: logtype1 log level changed from info to error
EAL: logtype3 log level changed from error to emergency
EAL: logtype2 log level changed from info to emergency
EAL: logtype3 log level changed from emergency to debug
EAL: logtype1 log level changed from error to debug
EAL: logtype2 log level changed from emergency to debug
error message
critical message
critical message
error message
== static log types
TESTAPP1: error message
TESTAPP1: critical message
TESTAPP2: critical message
TESTAPP1: error message
Test OK

Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>